The truncation isn't being programmed if the truncation
depth is set to 2, it causes an issue with dce11.2 asic
using 6bit eDP panel. It required to truncate 12:10 in order to
perform spatial dither 10:6.
This change will allow 12:10 truncation to be enabled.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
. '#sound-dai-cells' property is required to describe link between
the HDMI IP block and the SoC's audio subsystem and Exynos SoC device
tree files already have this property but we missed its description.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Y79z
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-fixes-for-v4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Add a device tree property description for hdmi device node
. '#sound-dai-cells' property is required to describe link between
the HDMI IP block and the SoC's audio subsystem and Exynos SoC device
tree files already have this property but we missed its description.
* tag 'exynos-drm-fixes-for-v4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
dt-bindings: exynos: Document #sound-dai-cells property of the HDMI node
This contains two small fixes for the alpha blending support that was
merged into v4.16-rc1 and a fix for connector reference leaks caused by
the fact that display pipelines are no longer automatically disabled if
the framebuffer is removed.
Furthermore this contains a fix for a crash on IOMMU detach at driver
unbind time and a regulator enable/disable unbalance fix.
-----BEGIN PGP SIGNATURE-----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=iuUO
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.16-rc7-fixes' of git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v4.16-rc7
This contains two small fixes for the alpha blending support that was
merged into v4.16-rc1 and a fix for connector reference leaks caused by
the fact that display pipelines are no longer automatically disabled if
the framebuffer is removed.
Furthermore this contains a fix for a crash on IOMMU detach at driver
unbind time and a regulator enable/disable unbalance fix.
* tag 'drm/tegra/for-4.16-rc7-fixes' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: Shutdown on driver unbind
drm/tegra: dsi: Don't disable regulator on ->exit()
drm/tegra: dc: Detach IOMMU group from domain only once
drm/tegra: plane: Correct legacy blending
drm/tegra: plane: Fix RGB565 format on older Tegra
Normally I send this earlier than now but real life got in the way.
Things are back to normal now.
There's the normal set of SoC driver fixes: i.MX boot warning, TI
display clks, allwinner clk ops being wrong (fun), driver probe
badness on error paths, correctness fix for the new aspeed driver,
and even a fix for a race condition in the bcm2835 clk driver.
At the core framework level we also got some fixes for the clk
phase API caching at the wrong time, better handling of the enabled
state of orphan clks, and a fix for a newly introduced bug in how we
handle rate calculations for pass-through clks.
-----BEGIN PGP SIGNATURE-----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=Yjti
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A late collection of fixes for regressions seen this release cycle.
Normally I send this earlier than now but real life got in the way.
Things are back to normal now.
There's the normal set of SoC driver fixes: i.MX boot warning, TI
display clks, allwinner clk ops being wrong (fun), driver probe
badness on error paths, correctness fix for the new aspeed driver, and
even a fix for a race condition in the bcm2835 clk driver.
At the core framework level we also got some fixes for the clk phase
API caching at the wrong time, better handling of the enabled state of
orphan clks, and a fix for a newly introduced bug in how we handle
rate calculations for pass-through clks"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: bcm2835: Protect sections updating shared registers
clk: bcm2835: Fix ana->maskX definitions
clk: aspeed: Prevent reset if clock is enabled
clk: aspeed: Fix is_enabled for certain clocks
clk: qcom: msm8916: Fix return value check in qcom_apcs_msm8916_clk_probe()
clk: hisilicon: hi3660:Fix potential NULL dereference in hi3660_stub_clk_probe()
clk: fix determine rate error with pass-through clock
clk: migrate the count of orphaned clocks at init
clk: update cached phase to respect the fact when setting phase
clk: ti: am43xx: add set-rate-parent support for display clkctrl clock
clk: ti: am33xx: add set-rate-parent support for display clkctrl clock
clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX53
clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops
Prasad reported that he has seen crashes in BPF subsystem with netd
on Android with arm64 in the form of (note, the taint is unrelated):
[ 4134.721483] Unable to handle kernel paging request at virtual address 800000001
[ 4134.820925] Mem abort info:
[ 4134.901283] Exception class = DABT (current EL), IL = 32 bits
[ 4135.016736] SET = 0, FnV = 0
[ 4135.119820] EA = 0, S1PTW = 0
[ 4135.201431] Data abort info:
[ 4135.301388] ISV = 0, ISS = 0x00000021
[ 4135.359599] CM = 0, WnR = 0
[ 4135.470873] user pgtable: 4k pages, 39-bit VAs, pgd = ffffffe39b946000
[ 4135.499757] [0000000800000001] *pgd=0000000000000000, *pud=0000000000000000
[ 4135.660725] Internal error: Oops: 96000021 [#1] PREEMPT SMP
[ 4135.674610] Modules linked in:
[ 4135.682883] CPU: 5 PID: 1260 Comm: netd Tainted: G S W 4.14.19+ #1
[ 4135.716188] task: ffffffe39f4aa380 task.stack: ffffff801d4e0000
[ 4135.731599] PC is at bpf_prog_add+0x20/0x68
[ 4135.741746] LR is at bpf_prog_inc+0x20/0x2c
[ 4135.751788] pc : [<ffffff94ab7ad584>] lr : [<ffffff94ab7ad638>] pstate: 60400145
[ 4135.769062] sp : ffffff801d4e3ce0
[...]
[ 4136.258315] Process netd (pid: 1260, stack limit = 0xffffff801d4e0000)
[ 4136.273746] Call trace:
[...]
[ 4136.442494] 3ca0: ffffff94ab7ad584 0000000060400145 ffffffe3a01bf8f8 0000000000000006
[ 4136.460936] 3cc0: 0000008000000000 ffffff94ab844204 ffffff801d4e3cf0 ffffff94ab7ad584
[ 4136.479241] [<ffffff94ab7ad584>] bpf_prog_add+0x20/0x68
[ 4136.491767] [<ffffff94ab7ad638>] bpf_prog_inc+0x20/0x2c
[ 4136.504536] [<ffffff94ab7b5d08>] bpf_obj_get_user+0x204/0x22c
[ 4136.518746] [<ffffff94ab7ade68>] SyS_bpf+0x5a8/0x1a88
Android's netd was basically pinning the uid cookie BPF map in BPF
fs (/sys/fs/bpf/traffic_cookie_uid_map) and later on retrieving it
again resulting in above panic. Issue is that the map was wrongly
identified as a prog! Above kernel was compiled with clang 4.0,
and it turns out that clang decided to merge the bpf_prog_iops and
bpf_map_iops into a single memory location, such that the two i_ops
could then not be distinguished anymore.
Reason for this miscompilation is that clang has the more aggressive
-fmerge-all-constants enabled by default. In fact, clang source code
has a comment about it in lib/AST/ExprConstant.cpp on why it is okay
to do so:
Pointers with different bases cannot represent the same object.
(Note that clang defaults to -fmerge-all-constants, which can
lead to inconsistent results for comparisons involving the address
of a constant; this generally doesn't matter in practice.)
The issue never appeared with gcc however, since gcc does not enable
-fmerge-all-constants by default and even *explicitly* states in
it's option description that using this flag results in non-conforming
behavior, quote from man gcc:
Languages like C or C++ require each variable, including multiple
instances of the same variable in recursive calls, to have distinct
locations, so using this option results in non-conforming behavior.
There are also various clang bug reports open on that matter [1],
where clang developers acknowledge the non-conforming behavior,
and refer to disabling it with -fno-merge-all-constants. But even
if this gets fixed in clang today, there are already users out there
that triggered this. Thus, fix this issue by explicitly adding
-fno-merge-all-constants to the kernel's Makefile to generically
disable this optimization, since potentially other places in the
kernel could subtly break as well.
Note, there is also a flag called -fmerge-constants (not supported
by clang), which is more conservative and only applies to strings
and it's enabled in gcc's -O/-O2/-O3/-Os optimization levels. In
gcc's code, the two flags -fmerge-{all-,}constants share the same
variable internally, so when disabling it via -fno-merge-all-constants,
then we really don't merge any const data (e.g. strings), and text
size increases with gcc (14,927,214 -> 14,942,646 for vmlinux.o).
$ gcc -fverbose-asm -O2 foo.c -S -o foo.S
-> foo.S lists -fmerge-constants under options enabled
$ gcc -fverbose-asm -O2 -fno-merge-all-constants foo.c -S -o foo.S
-> foo.S doesn't list -fmerge-constants under options enabled
$ gcc -fverbose-asm -O2 -fno-merge-all-constants -fmerge-constants foo.c -S -o foo.S
-> foo.S lists -fmerge-constants under options enabled
Thus, as a workaround we need to set both -fno-merge-all-constants
*and* -fmerge-constants in the Makefile in order for text size to
stay as is.
[1] https://bugs.llvm.org/show_bug.cgi?id=18538
Reported-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Richard Smith <richard-llvm@metafoo.co.uk>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: linux-kernel@vger.kernel.org
Tested-by: Prasad Sodagudi <psodagud@codeaurora.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Many bug fixes related to syzkaller from Leon Romanovsky.
These are still for the mlx driver and ucma interface.
- Fix a situation with port reuse for iWarp, discovered during scale-up
testing
- Bug fixes for the profile and restrack patches accepted during this merge
window
- Compile warning cleanups from Arnd, this is apparently the last warning
to make 32 bit builds quite.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Gal+
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Not much exciting here, almost entirely syzkaller fixes.
This is going to be on ongoing theme for some time, I think. Both
Google and Mellanox are now running syzkaller on different parts of
the user API.
Summary:
- Many bug fixes related to syzkaller from Leon Romanovsky. These are
still for the mlx driver and ucma interface.
- Fix a situation with port reuse for iWarp, discovered during
scale-up testing
- Bug fixes for the profile and restrack patches accepted during this
merge window
- Compile warning cleanups from Arnd, this is apparently the last
warning to make 32 bit builds quiet"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/ucma: Ensure that CM_ID exists prior to access it
RDMA/verbs: Remove restrack entry from XRCD structure
RDMA/ucma: Fix use-after-free access in ucma_close
RDMA/ucma: Check AF family prior resolving address
infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
infiniband: qplib_fp: fix pointer cast
IB/mlx5: Fix cleanup order on unload
RDMA/ucma: Don't allow join attempts for unsupported AF family
RDMA/ucma: Fix access to non-initialized CM_ID object
RDMA/core: Do not use invalid destination in determining port reuse
RDMA/mlx5: Fix crash while accessing garbage pointer and freed memory
IB/mlx5: Fix integer overflows in mlx5_ib_create_srq
IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
One driver patch (qla2xxx) which fixes a problem caused by an existing
regression fix (FCP discovery is failing) and one generic fix to a
longstanding bug in libsas that causes I/O eventually to hang to the
device in the face of ATA error recovery.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWrGPDCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbR8AQDshy6Y
HV+x5K0kACcMSWA2WGH/1zgSmpAfSjLckD8YawEA99OGBUNHkiIYoNx3WrHHrHtT
6PReg6htfY/1yDQ0vJk=
=IBHa
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
- one driver patch (qla2xxx) which fixes a problem caused by an
existing regression fix (FCP discovery is failing)
- one generic fix to a longstanding bug in libsas that causes I/O
eventually to hang to the device in the face of ATA error recovery.
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery
scsi: libsas: defer ata device eh commands to libata
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJasXu4AAoJECebzXlCjuG+fNcP/3QYZwLdIYe0pZSIn/9V6sW1
PwmxhTkBOEkeP4RTArI/4spZk3mrTqv7SC+ACYKbkD910uDC8cY3ElcwKxi82NL7
9M4gNGnscKJtUye2LhoamZZLOLDIzr302pEv0IIh3v11sAu0rK1K0bqHSfI1ga/q
r3S1sRtad+UktVH+jJ8MNE4NBfXC/xTqPz6Z+wd30CPmJKaA7Oqle7Wd3479zj0c
A7l+EtleFo/bctHwY7yp+lVs1Yqr3ShS+qu+YAknBTnGco9JJFJsZM6x33DFMZC4
EvFPO0gh4PuN/SkgT4zBvBlSXQjuqUWTU98ohqP7ugTtd0dXEIpR4DLLwWScA2KV
z+YIJIKUh8Ryh8KI+J50Ed9WseVlmACHOBTJjLW7KnSYtey3+mgh5kp6Vcd9IxHc
Gju7YgDK5FOV2JykaHQ/qCaSyL6ao1firapSrtZK4N27LpJ05FreK6qnLJtHmiwU
pqVHyfrH4kfho1T0Nr/bw4bnugBKZVXBbBQLKp2twgJhYkUkP+vxV8QMX3h531hB
jsQV9OIVPkdTjr5L0BmQMJ4GugM1Zr4mIunY6Mw0z5ax1JeBUelWeQccqL1YCSGL
TZr+0N9yOuzQHX+e+mZ8vFYqfUTRF/Xfkn1+ZV3ZQU/yY8oBkDbQddaLoo1hjLUx
2dpR3xIhzyDkP59jrK4M
=oGAf
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd fix from Bruce Fields:
"Just one fix for an occasional panic from Jeff Layton"
* tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux:
nfsd: remove blocked locks on client teardown
The current check statement in BPF syscall will do a capability check
for CAP_SYS_ADMIN before checking sysctl_unprivileged_bpf_disabled. This
code path will trigger unnecessary security hooks on capability checking
and cause false alarms on unprivileged process trying to get CAP_SYS_ADMIN
access. This can be resolved by simply switch the order of the statement
and CAP_SYS_ADMIN is not required anyway if unprivileged bpf syscall is
allowed.
Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
As this recently came up on netdev [0], lets add it to the BPF devel doc.
[0] https://www.spinics.net/lists/netdev/msg489612.html
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 4bebdc7a85 ("bpf: add helper bpf_perf_prog_read_value")
added helper bpf_perf_prog_read_value so that perf_event type program
can read event counter and enabled/running time.
This commit, however, introduced a bug which allows this helper
for tracepoint type programs. This is incorrect as bpf_perf_prog_read_value
needs to access perf_event through its bpf_perf_event_data_kern type context,
which is not available for tracepoint type program.
This patch fixed the issue by separating bpf_func_proto between tracepoint
and perf_event type programs and removed bpf_perf_prog_read_value
from tracepoint func prototype.
Fixes: 4bebdc7a85 ("bpf: add helper bpf_perf_prog_read_value")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Function bpf_fill_maxinsns11 is designed to not be able to be JITed on
x86_64. So, it fails when CONFIG_BPF_JIT_ALWAYS_ON=y, and
commit 09584b4067 ("bpf: fix selftests/bpf test_kmod.sh failure when
CONFIG_BPF_JIT_ALWAYS_ON=y") makes sure that failure is detected on that
case.
However, it does not fail on other architectures, which have a different
JIT compiler design. So, test_bpf has started to fail to load on those.
After this fix, test_bpf loads fine on both x86_64 and ppc64el.
Fixes: 09584b4067 ("bpf: fix selftests/bpf test_kmod.sh failure when CONFIG_BPF_JIT_ALWAYS_ON=y")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The undocumented 'icebp' instruction (aka 'int1') works pretty much like
'int3' in the absense of in-circuit probing equipment (except,
obviously, that it raises #DB instead of raising #BP), and is used by
some validation test-suites as such.
But Andy Lutomirski noticed that his test suite acted differently in kvm
than on bare hardware.
The reason is that kvm used an inexact test for the icebp instruction:
it just assumed that an all-zero VM exit qualification value meant that
the VM exit was due to icebp.
That is not unlike the guess that do_debug() does for the actual
exception handling case, but it's purely a heuristic, not an absolute
rule. do_debug() does it because it wants to ascribe _some_ reasons to
the #DB that happened, and an empty %dr6 value means that 'icebp' is the
most likely casue and we have no better information.
But kvm can just do it right, because unlike the do_debug() case, kvm
actually sees the real reason for the #DB in the VM-exit interruption
information field.
So instead of relying on an inexact heuristic, just use the actual VM
exit information that says "it was 'icebp'".
Right now the 'icebp' instruction isn't technically documented by Intel,
but that will hopefully change. The special "privileged software
exception" information _is_ actually mentioned in the Intel SDM, even
though the cause of it isn't enumerated.
Reported-by: Andy Lutomirski <luto@kernel.org>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 2f987a76a9 ("net: ipv6: keep sk status consistent after datagram connect failure")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEENrCndlB/VnAEWuH5k9IU1zQoZfEFAlqvjK0THG1rbEBwZW5n
dXRyb25peC5kZQAKCRCT0hTXNChl8ZMKB/4mf5fq7ed4EUKpeu2a6LTxoVl1bMWR
SDwsjVM35x83riG2mctP0TsnZMq16w4PzzDsBERkjBFz2GuiZzfNkpy3dOSR/Y6G
uNl2lJAKJftqJnx7r7qQIfrn0ItAIjGfanGsDI/ZwhiHYM7DGEXbDYUo8BMJAjvW
t9tnqWa6vk7uy2UXxvnLNtqt40EWXL9kKnNjUvL5Ik5g1bKPn9hqcyhKJi48X9Jt
+29MuuLai8dZlpInn9FR/QKZK2Z2ug3Y5oasB9ArNOGDuG7sNAW2gVjpVaZYi3Py
wDUIaQ793FWPBvRm82nj67TomKE06Mm8SDFH1S7TOLEPePfXQwaYzG+1
=kYfz
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-4.16-20180319' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2018-03-19
this is a pull reqeust of one patch for net/master.
The patch is by Andri Yngvason and fixes a potential use-after-free bug
in the cc770 driver introduced in the previous pull-request.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Uwe Kleine-König says:
====================
net: dsa: mv88e6xxx: some fixes
these patches target net-next and got approved by Andrew Lunn.
Compared to (implicit) v1, I dropped the patch that I didn't know if it
was right because of missing documentation on my side. But Andrew
already cared for that in a patch that is now adfccf1182 in net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This changes the respective line in /proc/interrupts from
49: x x mv88e6xxx-g1 7 Edge mv88e6xxx-g1
to
49: x x mv88e6xxx-g1 7 Edge mv88e6xxx-g2
which makes more sense.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The switch name is emitted in the kernel log, so having the right name
there is nice.
Fixes: 1558727a1c ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6141")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: Adapt driver to upcoming firmware versions
The first two patches make sure that reserved fields are set to zero, as
required by the device's programmer's reference manual (PRM).
Last two patches prevent the driver from performing an invalid operation
that is going to be denied by upcoming firmware versions.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When a new ACL group is created its region (ACL) list is initially
empty. Thus, the call to mlxsw_sp_acl_tcam_group_update() would
basically invalidate an already invalid (non-existent) group.
Remove the unnecessary call and make the function symmetric to its del()
counterpart.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver currently creates empty ACL groups, binds them to the
requested port and then fills them with actual ACLs that point to TCAM
regions.
However, empty ACL groups are considered invalid and upcoming firmware
versions are going to forbid their binding.
Work around this limitation by only performing the binding after the
first ACL was added to the group.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to set some of the fields within 'mbox_config_profile',
since they are reserved and capability mask should be set to zero.
Signed-off-by: Tal Bar <talb@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some of the opcodes don't use in, out or both mboxes. In such cases, the
mbox address is a reserved field and FW expects it to be zero.
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
cppcheck report:
[drivers/net/ethernet/cortina/gemini.c:543]: (error) Memory leak: skb_tab
Signed-off-by: Igor Pylypiv <igor.pylypiv@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the optional regulator is deferred, we must release some resources.
They will be re-allocated when the probe function will be called again.
Fixes: 6eacf31139 ("ethernet: arc: Add support for Rockchip SoC layer device tree bindings")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current code performs unneeded free. Remove the redundant skb freeing
during the error path.
Fixes: 1555d204e7 ("devlink: Support for pipeline debug (dpipe)")
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mlx5 driver calls ida_pre_get() in a loop for no readily apparent
reason. The driver uses ida_simple_get() which will call ida_pre_get()
by itself and there's no need to use ida_pre_get() unless using
ida_get_new().
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
Here are a few more important Bluetooth driver fixes for the 4.16
kernel.
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Grygorii Strashko says:
====================
net: phy: relax error checking when creating sysfs link netdev->phydev
Some ethernet drivers (like TI CPSW) may connect and manage >1 Net PHYs per
one netdevice, as result such drivers will produce warning during system
boot and fail to connect second phy to netdevice when PHYLIB framework
will try to create sysfs link netdev->phydev for second PHY
in phy_attach_direct(), because sysfs link with the same name has been
created already for the first PHY.
As result, second CPSW external port will became unusable.
This regression was introduced by commits:
5568363f0c ("net: phy: Create sysfs reciprocal links for attached_dev/phydev"
a399546049 ("net: phy: Relax error checking on sysfs_create_link()"
Patch 1: exports sysfs_create_link_nowarn() function as preparation for Patch 2.
Patch 2: relaxes error checking when PHYLIB framework is creating sysfs
link netdev->phydev in phy_attach_direct(), suppresses warning by using
sysfs_create_link_nowarn() and adds error message instead, so links creation
failure is not fatal any more and system can continue working,
which fixes TI CPSW issue and makes boot logs accessible
in case of NFS boot, for example.
This can be stable material 4.13+.
Changes in v2:
- commit messages updated.
v1:
https://patchwork.ozlabs.org/cover/886058/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Some ethernet drivers (like TI CPSW) may connect and manage >1 Net PHYs per
one netdevice, as result such drivers will produce warning during system
boot and fail to connect second phy to netdevice when PHYLIB framework
will try to create sysfs link netdev->phydev for second PHY
in phy_attach_direct(), because sysfs link with the same name has been
created already for the first PHY. As result, second CPSW external
port will became unusable.
Fix it by relaxing error checking when PHYLIB framework is creating sysfs
link netdev->phydev in phy_attach_direct(), suppressing warning by using
sysfs_create_link_nowarn() and adding error message instead.
After this change links (phy->netdev and netdev->phy) creation failure is not
fatal any more and system can continue working, which fixes TI CPSW issue.
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Fixes: a399546049 ("net: phy: Relax error checking on sysfs_create_link()")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sysfs_create_link_nowarn() is going to be used in phylib framework in
subsequent patch which can be built as module. Hence, export
sysfs_create_link_nowarn() to avoid build errors.
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Fixes: a399546049 ("net: phy: Relax error checking on sysfs_create_link()")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If bios sets up an MST output and hardware state readout code sees this is
an SST configuration, when disabling the encoder we end up calling
->post_disable_dp() hook instead of the MST version. Consequently, we write
to the DP_SET_POWER dpcd to set it D3 state. Further along when we try
enable the encoder in MST mode, POWER_UP_PHY transaction fails to power up
the MST hub. This results in continuous link training failures which keep
the system busy delaying boot. We could identify bios MST boot discrepancy
and handle it accordingly but a simple way to solve this is to write to the
DP_SET_POWER dpcd for MST too.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105470
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Laura Abbott <labbott@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 5ea2355a10 ("drm/i915/mst: Use MST sideband message transactions for dpms control")
Tested-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180314054825.1718-1-dhinakaran.pandiyan@intel.com
(cherry picked from commit ad260ab32a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Pull cgroup fixes from Tejun Heo:
"Two commits to fix the following subtle cgroup2 behavior bugs:
- cpu.max was rejecting config when it shouldn't
- thread mode enable was allowed when it shouldn't"
* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix rule checking for threaded mode switching
sched, cgroup: Don't reject lower cpu.max on ancestors
The resource allocation in WDAT watchdog has off-one-by error, it sets
one byte more than the actual end address. This may eventually lead
to unexpected resource conflicts.
Fixes: 058dfc7670 (ACPI / watchdog: Add support for WDAT hardware watchdog)
Cc: 4.9+ <stable@vger.kernel.org> # 4.9+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull workqueue fixes from Tejun Heo:
"Two low-impact workqueue commits.
One fixes workqueue creation error path and the other removes the
unused cancel_work()"
* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: remove unused cancel_work()
workqueue: use put_device() instead of kfree()
Pull percpu fixes from Tejun Heo:
"Late percpu pull request for v4.16-rc6.
- percpu allocator pool replenishing no longer triggers OOM or
warning messages.
Also, the alloc interface now understands __GFP_NORETRY and
__GFP_NOWARN. This is to allow avoiding OOMs from userland
triggered actions like bpf map creation.
Also added cond_resched() in alloc loop.
- perpcu allocation now can be interrupted by kill sigs to avoid
deadlocking OOM killer.
- Added Dennis Zhou as a co-maintainer.
He has rewritten the area map allocator, understands most of the
code base and has been responsive for all bug reports"
* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu_ref: Update doc to dissuade users from depending on internal RCU grace periods
mm: Allow to kill tasks doing pcpu_alloc() and waiting for pcpu_balance_workfn()
percpu: include linux/sched.h for cond_resched()
percpu: add a schedule point in pcpu_balance_workfn()
percpu: allow select gfp to be passed to underlying allocators
percpu: add __GFP_NORETRY semantics to the percpu balancing path
percpu: match chunk allocator declarations with definitions
percpu: add Dennis Zhou as a percpu co-maintainer
Pull libata fixes from Tejun Heo:
"I sat on them too long and it's quite a few this late, but nothing has
a wide blast area. The changes are...
- Fix corner cases in SG command handling.
- Recent introduction of default powersaving mode config option
exposed several devices with broken powersaving behaviors. A number
of patches to update the blacklist accordingly.
- Fix a kernel panic on SAS hotplug.
- Other misc and device specific updates"
* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version
libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions
libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs
libata: Enable queued TRIM for Samsung SSD 860
PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L
ahci: Add PCI-id for the Highpoint Rocketraid 644L card
ata: do not schedule hot plug if it is a sas host
libata: disable LPM for Crucial BX100 SSD 500GB drive
libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs
libata: update documentation for sysfs interfaces
ata: sata_rcar: Remove unused variable in sata_rcar_init_controller()
libata: transport: cleanup documentation of sysfs interface
sata_rcar: Reset SATA PHY when Salvator-X board resumes
libata: don't try to pass through NCQ commands to non-NCQ devices
libata: remove WARN() for DMA or PIO command without data
libata: fix length validation of ATAPI-relayed SCSI commands
ata: libahci: fix comment indentation
ahci: Add check for device presence (PCIe hot unplug) in ahci_stop_engine()
libata: Fix compile warning with ATA_DEBUG enabled
We had some reports of panics in nfsd4_lm_notify, and that showed a
nfs4_lockowner that had outlived its so_client.
Ensure that we walk any leftover lockowners after tearing down all of
the stateids, and remove any blocked locks that they hold.
With this change, we also don't need to walk the nbl_lru on nfsd_net
shutdown, as that will happen naturally when we tear down the clients.
Fixes: 76d348fadf (nfsd: have nfsd4_lock use blocking locks for v4.1+ locks)
Reported-by: Frank Sorenson <fsorenso@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: stable@vger.kernel.org # 4.9
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
John Fastabend says:
====================
This series adds a BPF hook for sendmsg and senfile by using
the ULP infrastructure and sockmap. A simple pseudocode example
would be,
// load the programs
bpf_prog_load(SOCKMAP_TCP_MSG_PROG, BPF_PROG_TYPE_SK_MSG,
&obj, &msg_prog);
// lookup the sockmap
bpf_map_msg = bpf_object__find_map_by_name(obj, "my_sock_map");
// get fd for sockmap
map_fd_msg = bpf_map__fd(bpf_map_msg);
// attach program to sockmap
bpf_prog_attach(msg_prog, map_fd_msg, BPF_SK_MSG_VERDICT, 0);
// Add a socket 'fd' to sockmap at location 'i'
bpf_map_update_elem(map_fd_msg, &i, fd, BPF_ANY);
After the above snippet any socket attached to the map would run
msg_prog on sendmsg and sendfile system calls.
Three additional helpers are added bpf_msg_apply_bytes(),
bpf_msg_cork_bytes(), and bpf_msg_pull_data(). With
bpf_msg_apply_bytes BPF programs can tell the infrastructure how
many bytes the given verdict should apply to. This has two cases.
First, a BPF program applies verdict to fewer bytes than in the
current sendmsg/sendfile msg this will apply the verdict to the
first N bytes of the message then run the BPF program again with
data pointers recalculated to the N+1 byte. The second case is the
BPF program applies a verdict to more bytes than the current sendmsg
or sendfile system call. In this case the infrastructure will cache
the verdict and apply it to future sendmsg/sendfile calls until the
byte limit is reached. This avoids the overhead of running BPF
programs on large payloads.
The helper bpf_msg_cork_bytes() handles a different case where
a BPF program can not reach a verdict on a msg until it receives
more bytes AND the program doesn't want to forward the packet
until it is known to be "good". The example case being a user
(albeit a dumb one probably) sends a N byte header in 1B system
calls. The BPF program can call bpf_msg_cork_bytes with the
required byte limit to reach a verdict and then the program will
only be called again once N bytes are received.
The last helper added in this series is bpf_msg_pull_data(). It
is used to pull data in for modification or reading. Similar to
how sk_pull_data() works msg_pull_data can be used to access data
not in the initial (data_start, data_end) range. For sendpage()
calls this is needed if any data is accessed because the BPF
sendpage hook initializes the data_start and data_end pointers to
zero. We do this because sendpage data is shared with the user
and can be modified during or after the BPF verdict possibly
invalidating any verdict the BPF program decides. For sendmsg
the data is already copied by the sendmsg bpf infrastructure so
we only copy the data if the user request a data range that is
not already linearized. This happens if the user requests larger
blocks of data that are not in a single scatterlist element. The
common case seems to be accessing headers which normally are
in the first scatterlist element and already linearized.
For more examples please review the sample program. There are
examples for all the actions and helpers there.
Patches 1-8 implement the above sockmap/BPF infrastructure. The
remaining patches flush out some minimal selftests and the sample
sockmap program. The sockmap sample program is the main vehicle
for testing this infrastructure and will be moved into selftests
shortly. The final patch in this series is a simple shell script
to run a set of tests. These are the tests I run after any changes
to sockmap. The next task on the list after this series is to
push those into selftests so we can avoid manually testing.
Couple notes on future items in the pipeline,
0. move sample sockmap programs into selftests (noted above)
1. add additional support for tcp flags, most are ignored now.
2. add a Documentation/bpf/sockmap file with these details
3. support stacked ULP types to allow this and ktls to cooperate
4. Ingress flag support, redirect only supports egress here. The
other redirect helpers support ingress and egress flags.
5. add optimizations, I cut a few optimizations here in the
first iteration of the code for later study/implementation
-v3 updates
: u32 data pointers in msg_md changed to void *
: page_address NULL check and flag verification in msg_pull_data
: remove old note in commit msg that is no longer relevant
: remove enum sk_msg_action its not used anywhere
: fixup test_verifier W -> DW insn to account for data pointers
: unintentionally dropped a smap_stop_tx() call in sockmap.c
I propagated the ACKs forward because above changes were small
one/two line changes.
-v2 updates (discussion):
Dave noticed that sendpage call was previously (in v1) running
on the data directly. This allowed users to potentially modify
the data after or during the BPF program. However doing a copy
automatically even if the data is not accessed has measurable
performance impact. So we added another helper modeled after
the existing skb_pull_data() helper to allow users to selectively
pull data from the msg. This is also useful in the sendmsg case
when users need to access data outside the first scatterlist
element or across scatterlist boundaries.
While doing this I also unified the sendmsg and sendfile handlers
a bit. Originally the sendfile call was optimized for never
touching the data. I've decided for a first submission to drop
this optimization and we can add it back later. It introduced
unnecessary complexity, at least for a first posting, for a
use case I have not entirely flushed out yet. When the use
case is deployed we can add it back if needed. Then we can
review concrete performance deltas as well on real-world
use-cases/applications.
Lastly, I reorganized the patches a bit. Now all sockmap
changes are in a single patch and each helper gets its own
patch. This, at least IMO, makes it easier to review because
sockmap changes are not spread across the patch series. On
the other hand now apply_bytes, cork_bytes logic is only
activated later in the series. But that should be OK.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds the test script I am currently using to validate
the latest sockmap changes. Shortly sockmap will be ported
to selftests and these will be run from the infrastructure
there. Until then add the script here so we have a coverage
checklist when porting into selftests.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds an option to test the msg_pull_data helper. This
uses two options txmsg_start and txmsg_end to let the user
specify start and end bytes to pull.
The options can be used with txmsg_apply, txmsg_cork options
as well as with any of the basic tests, txmsg, txmsg_redir and
txmsg_drop (plus noisy variants) to run pull_data inline with
those tests. By giving user direct control over the variables
we can easily do negative testing as well as positive tests.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add tests for SK_DROP.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add sample application support for the bpf_msg_cork_bytes helper. This
lets the user specify how many bytes each verdict should apply to.
Similar to apply_bytes() tests these can be run as a stand-alone test
when used without other options or inline with other tests by using
the txmsg_cork option along with any of the basic tests txmsg,
txmsg_redir, txmsg_drop.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds an option to test the apply_bytes helper. This option lets
the user specify an int on the command line specifying how much data
each verdict should apply to.
When this is set a map entry is set with the bytes input by the user
and then the specified program --txmsg or --txmsg_redir will use the
value and set the applied data. If no other option is set then a
default --txmsg_apply program is run. This program will drop pkts
if an error is detected on the bytes map lookup. Useful to verify
the map lookup and apply helper are working and causing a hard
error if it is not.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
To verify data is not being dropped or corrupted this adds an option
to verify test-patterns on recv.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>