Commit Graph

54552 Commits

Author SHA1 Message Date
Chuck Lever
35e77d21ba SUNRPC: Add rpc_auth::au_ralign field
Currently rpc_inline_rcv_pages() uses au_rslack to estimate the
size of the upper layer reply header. This is fine for auth flavors
where au_verfsize == au_rslack.

However, some auth flavors have more going on. krb5i for example has
two more words after the verifier, and another blob following the
RPC message. The calculation involving au_rslack pushes the upper
layer reply header too far into the rcv_buf.

au_rslack is still valuable: it's the amount of buffer space needed
for the reply, and is used when allocating the reply buffer. We'll
keep that.

But, add a new field that can be used to properly estimate the
location of the upper layer header in each RPC reply, based on the
auth flavor in use.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14 11:48:36 -05:00
Chuck Lever
a00275baa6 SUNRPC: Make AUTH_SYS and AUTH_NULL set au_verfsize
au_verfsize will be needed for a non-flavor-specific computation
in a subsequent patch.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14 11:17:47 -05:00
Chuck Lever
02ef04e432 NFS: Account for XDR pad of buf->pages
Certain NFS results (eg. READLINK) might expect a data payload that
is not an exact multiple of 4 bytes. In this case, XDR encoding
is required to pad that payload so its length on the wire is a
multiple of 4 bytes. The constants that define the maximum size of
each NFS result do not appear to account for this extra word.

In each case where the data payload is to be received into pages:

- 1 word is added to the size of the receive buffer allocated by
  call_allocate

- rpc_inline_rcv_pages subtracts 1 word from @hdrsize so that the
  extra buffer space falls into the rcv_buf's tail iovec

- If buf->pagelen is word-aligned, an XDR pad is not needed and
  is thus removed from the tail

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14 10:13:49 -05:00
Chuck Lever
cf500bac8f SUNRPC: Introduce rpc_prepare_reply_pages()
prepare_reply_buffer() and its NFSv4 equivalents expose the details
of the RPC header and the auth slack values to upper layer
consumers, creating a layering violation, and duplicating code.

Remedy these issues by adding a new RPC client API that hides those
details from upper layers in a common helper function.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14 10:04:37 -05:00
Chuck Lever
2573a46499 SUNRPC: Add SPDX IDs to some net/sunrpc/auth_gss/ files
Files under net/sunrpc/auth_gss/ do not yet have SPDX ID tags.
This directory is somewhat complicated because most of these files
have license boilerplate that is not strictly GPL 2.0.

In this patch I add ID tags where there is an obvious match. The
less recognizable licenses are still under research.

For reference, SPDX IDs added in this patch correspond to the
following license text:

GPL-2.0         https://spdx.org/licenses/GPL-2.0.html
GPL-2.0+        https://spdx.org/licenses/GPL-2.0+.html
BSD-3-Clause    https://spdx.org/licenses/BSD-3-Clause.html

Cc: Simo Sorce <simo@redhat.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14 09:54:37 -05:00
Chuck Lever
241b1f419f SUNRPC: Remove xdr_buf_trim()
The key action of xdr_buf_trim() is that it shortens buf->len, the
length of the xdr_buf's content. The other actions -- shortening the
head, pages, and tail components -- are actually not necessary. In
particular, changing the size of those components can corrupt the
RPC message contained in the buffer. This is an accident waiting to
happen rather than a current bug, as far as we know.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Bruce Fields <bfields@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14 09:39:34 -05:00
Chuck Lever
0c77668ddb SUNRPC: Introduce trace points in rpc_auth_gss.ko
Add infrastructure for trace points in the RPC_AUTH_GSS kernel
module, and add a few sample trace points. These report exceptional
or unexpected events, and observe the assignment of GSS sequence
numbers.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14 09:20:40 -05:00
Chuck Lever
a0584ee9ae SUNRPC: Use struct xdr_stream when decoding RPC Reply header
Modernize and harden the code path that parses an RPC Reply
message.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14 09:11:18 -05:00
Chuck Lever
7f5667a5f8 SUNRPC: Clean up rpc_verify_header()
- Recover some instruction count because I'm about to introduce a
  few xdr_inline_decode call sites
- Replace dprintk() call sites with trace points
- Reduce the hot path so it fits in fewer cachelines

I've also renamed it rpc_decode_header() to match everything else
in the RPC client.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13 13:54:37 -05:00
Chuck Lever
e8680a24a2 SUNRPC: Use struct xdr_stream when constructing RPC Call header
Modernize and harden the code path that constructs each RPC Call
message.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13 13:45:17 -05:00
Chuck Lever
fe9a270519 SUNRPC: Add build option to disable support for insecure enctypes
Enable distributions to enforce the rejection of ancient and
insecure Kerberos enctypes in the kernel's RPCSEC_GSS
implementation. These are the single-DES encryption types that
were deprecated in 2012 by RFC 6649.

Enctypes that were deprecated more recently (by RFC 8429) remain
fully supported for now because they are still likely to be widely
used.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Simo Sorce <simo@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13 13:33:12 -05:00
Chuck Lever
067fb11b12 SUNRPC: Remove rpc_xprt::tsh_size
tsh_size was added to accommodate transports that send a pre-amble
before each RPC message. However, this assumes the pre-amble is
fixed in size, which isn't true for some transports. That makes
tsh_size not very generic.

Also I'd like to make the estimation of RPC send and receive
buffer sizes more precise. tsh_size doesn't currently appear to be
accounted for at all by call_allocate.

Therefore let's just remove the tsh_size concept, and make the only
transports that have a non-zero tsh_size employ a direct approach.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13 13:14:35 -05:00
Chuck Lever
80125d4ae7 SUNRPC: Remove some dprintk() call sites from auth functions
Clean up: Reduce dprintk noise by removing dprintk() call sites
from hot path that do not report exceptions. These are usually
replaceable with function graph tracing.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13 12:12:59 -05:00
Chuck Lever
7be9cea360 SUNRPC: Add trace event that reports reply page vector alignment
We don't want READ payloads that are partially in the head iovec and
in the page buffer because this requires pull-up, which can be
expensive.

The NFS/RPC client tries hard to predict the size of the head iovec
so that the incoming READ data payload lands only in the page
vector, but it doesn't always get it right. To help diagnose such
problems, add a trace point in the logic that decodes READ-like
operations that reports whether pull-up is being done.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13 11:42:17 -05:00
Chuck Lever
5582863f45 SUNRPC: Add XDR overflow trace event
This can help field troubleshooting without needing the overhead of
a full network capture (ie, tcpdump).

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13 11:32:45 -05:00
Chuck Lever
0ccc61b1c7 SUNRPC: Add xdr_stream::rqst field
Having access to the controlling rpc_rqst means a trace point in the
XDR code can report:

 - the XID
 - the task ID and client ID
 - the p_name of RPC being processed

Subsequent patches will introduce such trace points.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13 11:05:50 -05:00
Chuck Lever
e340c2d6ef xprtrdma: Reduce the doorbell rate (Receive)
Post RECV WRs in batches to reduce the hardware doorbell rate per
transport. This helps the RPC-over-RDMA client scale better in
number of transports.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13 10:30:11 -05:00
Chuck Lever
d4550bbee6 xprtrdma: Check inline size before providing a Write chunk
In very rare cases, an NFS READ operation might predict that the
non-payload part of the RPC Call is large. For instance, an
NFSv4 COMPOUND with a large GETATTR result, in combination with a
large Kerberos credential, could push the non-payload part to be
several kilobytes.

If the non-payload part is larger than the connection's inline
threshold, the client is required to provision a Reply chunk. The
current Linux client does not check for this case. There are two
obvious ways to handle it:

a. Provision a Write chunk for the payload and a Reply chunk for
   the non-payload part

b. Provision a Reply chunk for the whole RPC Reply

Some testing at a recent NFS bake-a-thon showed that servers can
mostly handle a. but there are some corner cases that do not work
yet. b. already works (it has to, to handle krb5i/p), but could be
somewhat less efficient. However, I expect this scenario to be very
rare -- no-one has reported a problem yet.

So I'm going to implement b. Sometime later I will provide some
patches to help make b. a little more efficient by more carefully
choosing the Reply chunk's segment sizes to ensure the payload is
optimally aligned.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13 10:19:06 -05:00
Chuck Lever
ec482cc1c1 xprtrdma: Fix sparse warnings
linux/net/sunrpc/xprtrdma/rpc_rdma.c:375:63: warning: incorrect type in argument 5 (different base types)
linux/net/sunrpc/xprtrdma/rpc_rdma.c:375:63:    expected unsigned int [usertype] xid
linux/net/sunrpc/xprtrdma/rpc_rdma.c:375:63:    got restricted __be32 [usertype] rq_xid
linux/net/sunrpc/xprtrdma/rpc_rdma.c:432:62: warning: incorrect type in argument 5 (different base types)
linux/net/sunrpc/xprtrdma/rpc_rdma.c:432:62:    expected unsigned int [usertype] xid
linux/net/sunrpc/xprtrdma/rpc_rdma.c:432:62:    got restricted __be32 [usertype] rq_xid
linux/net/sunrpc/xprtrdma/rpc_rdma.c:489:62: warning: incorrect type in argument 5 (different base types)
linux/net/sunrpc/xprtrdma/rpc_rdma.c:489:62:    expected unsigned int [usertype] xid
linux/net/sunrpc/xprtrdma/rpc_rdma.c:489:62:    got restricted __be32 [usertype] rq_xid

Fixes: 0a93fbcb16 ("xprtrdma: Plant XID in on-the-wire RDMA ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13 10:05:24 -05:00
Linus Torvalds
27b4ad621e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "This pull request is dedicated to the upcoming snowpocalypse parts 2
  and 3 in the Pacific Northwest:

   1) Drop profiles are broken because some drivers use dev_kfree_skb*
      instead of dev_consume_skb*, from Yang Wei.

   2) Fix IWLWIFI kconfig deps, from Luca Coelho.

   3) Fix percpu maps updating in bpftool, from Paolo Abeni.

   4) Missing station release in batman-adv, from Felix Fietkau.

   5) Fix some networking compat ioctl bugs, from Johannes Berg.

   6) ucc_geth must reset the BQL queue state when stopping the device,
      from Mathias Thore.

   7) Several XDP bug fixes in virtio_net from Toshiaki Makita.

   8) TSO packets must be sent always on queue 0 in stmmac, from Jose
      Abreu.

   9) Fix socket refcounting bug in RDS, from Eric Dumazet.

  10) Handle sparse cpu allocations in bpf selftests, from Martynas
      Pumputis.

  11) Make sure mgmt frames have enough tailroom in mac80211, from Felix
      Feitkau.

  12) Use safe list walking in sctp_sendmsg() asoc list traversal, from
      Greg Kroah-Hartman.

  13) Make DCCP's ccid_hc_[rt]x_parse_options always check for NULL
      ccid, from Eric Dumazet.

  14) Need to reload WoL password into bcmsysport device after deep
      sleeps, from Florian Fainelli.

  15) Remove filter from mask before freeing in cls_flower, from Petr
      Machata.

  16) Missing release and use after free in error paths of s390 qeth
      code, from Julian Wiedmann.

  17) Fix lockdep false positive in dsa code, from Marc Zyngier.

  18) Fix counting of ATU violations in mv88e6xxx, from Andrew Lunn.

  19) Fix EQ firmware assert in qed driver, from Manish Chopra.

  20) Don't default Caivum PTP to Y in kconfig, from Bjorn Helgaas"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
  net: dsa: b53: Fix for failure when irq is not defined in dt
  sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
  geneve: should not call rt6_lookup() when ipv6 was disabled
  net: Don't default Cavium PTP driver to 'y'
  net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: via-velocity: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: tehuti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: sun: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: fsl_ucc_hdlc: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: fec_mpc52xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: smsc: epic100: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: dscc4: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: tulip: de2104x: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: defxx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net/mlx5e: Don't overwrite pedit action when multiple pedit used
  net/mlx5e: Update hw flows when encap source mac changed
  qed*: Advance drivers version to 8.37.0.20
  qed: Change verbosity for coalescing message.
  qede: Fix system crash on configuring channels.
  qed: Consider TX tcs while deriving the max num_queues for PF.
  ...
2019-02-08 11:21:54 -08:00
Hangbin Liu
173656acca sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
If we disabled IPv6 from the kernel command line (ipv6.disable=1), we should
not call ip6_err_gen_icmpv6_unreach(). This:

  ip link add sit1 type sit local 192.0.2.1 remote 192.0.2.2 ttl 1
  ip link set sit1 up
  ip addr add 198.51.100.1/24 dev sit1
  ping 198.51.100.2

if IPv6 is disabled at boot time, will crash the kernel.

v2: there's no need to use in6_dev_get(), use __in6_dev_get() instead,
    as we only need to check that idev exists and we are under
    rcu_read_lock() (from netif_receive_skb_internal()).

Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: ca15a078bd ("sit: generate icmpv6 error when receiving icmpv4 error")
Cc: Oussama Ghorbel <ghorbel@pivasoftware.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-07 10:48:42 -08:00
Dan Carpenter
00670cb8a7 net: dsa: Fix NULL checking in dsa_slave_set_eee()
This function can't succeed if dp->pl is NULL.  It will Oops inside the
call to return phylink_ethtool_get_eee(dp->pl, e);

Fixes: 1be52e97ed ("dsa: slave: eee: Allow ports to use phylink")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06 13:42:54 -08:00
Chuck Lever
e248aa7be8 svcrdma: Remove max_sge check at connect time
Two and a half years ago, the client was changed to use gathered
Send for larger inline messages, in commit 655fec6987 ("xprtrdma:
Use gathered Send for large inline messages"). Several fixes were
required because there are a few in-kernel device drivers whose
max_sge is 3, and these were broken by the change.

Apparently my memory is going, because some time later, I submitted
commit 25fd86eca1 ("svcrdma: Don't overrun the SGE array in
svc_rdma_send_ctxt"), and after that, commit f3c1fd0ee2 ("svcrdma:
Reduce max_send_sges"). These too incorrectly assumed in-kernel
device drivers would have more than a few Send SGEs available.

The fix for the server side is not the same. This is because the
fundamental problem on the server is that, whether or not the client
has provisioned a chunk for the RPC reply, the server must squeeze
even the most complex RPC replies into a single RDMA Send. Failing
in the send path because of Send SGE exhaustion should never be an
option.

Therefore, instead of failing when the send path runs out of SGEs,
switch to using a bounce buffer mechanism to handle RPC replies that
are too complex for the device to send directly. That allows us to
remove the max_sge check to enable drivers with small max_sge to
work again.

Reported-by: Don Dutile <ddutile@redhat.com>
Fixes: 25fd86eca1 ("svcrdma: Don't overrun the SGE array in ...")
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-02-06 15:32:34 -05:00
Eric Dumazet
6dce3c20ac rxrpc: bad unlock balance in rxrpc_recvmsg
When either "goto wait_interrupted;" or "goto wait_error;"
paths are taken, socket lock has already been released.

This patch fixes following syzbot splat :

WARNING: bad unlock balance detected!
5.0.0-rc4+ #59 Not tainted
-------------------------------------
syz-executor223/8256 is trying to release lock (sk_lock-AF_RXRPC) at:
[<ffffffff86651353>] rxrpc_recvmsg+0x6d3/0x3099 net/rxrpc/recvmsg.c:598
but there are no more locks to release!

other info that might help us debug this:
1 lock held by syz-executor223/8256:
 #0: 00000000fa9ed0f4 (slock-AF_RXRPC){+...}, at: spin_lock_bh include/linux/spinlock.h:334 [inline]
 #0: 00000000fa9ed0f4 (slock-AF_RXRPC){+...}, at: release_sock+0x20/0x1c0 net/core/sock.c:2798

stack backtrace:
CPU: 1 PID: 8256 Comm: syz-executor223 Not tainted 5.0.0-rc4+ #59
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_unlock_imbalance_bug kernel/locking/lockdep.c:3391 [inline]
 print_unlock_imbalance_bug.cold+0x114/0x123 kernel/locking/lockdep.c:3368
 __lock_release kernel/locking/lockdep.c:3601 [inline]
 lock_release+0x67e/0xa00 kernel/locking/lockdep.c:3860
 sock_release_ownership include/net/sock.h:1471 [inline]
 release_sock+0x183/0x1c0 net/core/sock.c:2808
 rxrpc_recvmsg+0x6d3/0x3099 net/rxrpc/recvmsg.c:598
 sock_recvmsg_nosec net/socket.c:794 [inline]
 sock_recvmsg net/socket.c:801 [inline]
 sock_recvmsg+0xd0/0x110 net/socket.c:797
 __sys_recvfrom+0x1ff/0x350 net/socket.c:1845
 __do_sys_recvfrom net/socket.c:1863 [inline]
 __se_sys_recvfrom net/socket.c:1859 [inline]
 __x64_sys_recvfrom+0xe1/0x1a0 net/socket.c:1859
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x446379
Code: e8 2c b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fe5da89fd98 EFLAGS: 00000246 ORIG_RAX: 000000000000002d
RAX: ffffffffffffffda RBX: 00000000006dbc28 RCX: 0000000000446379
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00000000006dbc20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dbc2c
R13: 0000000000000000 R14: 0000000000000000 R15: 20c49ba5e353f7cf

Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Howells <dhowells@redhat.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06 10:54:07 -08:00
David S. Miller
f09bef61f1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Use CONFIG_NF_TABLES_INET from seltests, not NF_TABLES_INET.
   From Naresh Kamboju.

2) Add a test to cover masquerading and redirect case, from Florian
   Westphal.

3) Two packets coming from the same socket may race to set up NAT,
   ending up with different tuples and the packet losing race being
   dropped. Update nf_conntrack_tuple_taken() to exercise clash
   resolution for this case. From Martynas Pumputis and Florian
   Westphal.

4) Unbind anonymous sets from the commit and abort path, this fixes
   a splat due to double set list removal/release in case that the
   transaction needs to be aborted.

5) Do not preserve original output interface for packets that are
   redirected in the output chain when ip6_route_me_harder() is
   called. Otherwise packets end up going not going to the loopback
   device. From Eli Cooper.

6) Fix bogus splat in nft_compat with CONFIG_REFCOUNT_FULL=y, this
   also simplifies the existing logic to deal with the list insertions
   of the xtables extensions. From Florian Westphal.

Diffstat look rather larger than usual because of the new selftest, but
Florian and I consider that having tests soon into the tree is good to
improve coverage. If there's a different policy in this regard, please,
let me know.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-05 11:23:23 -08:00
Florian Westphal
947e492c0f netfilter: nft_compat: don't use refcount_inc on newly allocated entry
When I moved the refcount to refcount_t type I missed the fact that
refcount_inc() will result in use-after-free warning with
CONFIG_REFCOUNT_FULL=y builds.

The correct fix would be to init the reference count to 1 at allocation
time, but, unfortunately we cannot do this, as we can't undo that
in case something else fails later in the batch.

So only solution I see is to special-case the 'new entry' condition
and replace refcount_inc() with a "delayed" refcount_set(1) in this case,
as done here.

The .activate callback can be removed to simplify things, we only
need to make sure that deactivate() decrements/unlinks the entry
from the list at end of transaction phase (commit or abort).

Fixes: 12c44aba66 ("netfilter: nft_compat: use refcnt_t type for nft_xt reference count")
Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-05 14:10:33 +01:00
Eli Cooper
15df03c661 netfilter: ipv6: Don't preserve original oif for loopback address
Commit 508b09046c ("netfilter: ipv6: Preserve link scope traffic
original oif") made ip6_route_me_harder() keep the original oif for
link-local and multicast packets. However, it also affected packets
for the loopback address because it used rt6_need_strict().

REDIRECT rules in the OUTPUT chain rewrite the destination to loopback
address; thus its oif should not be preserved. This commit fixes the bug
that redirected local packets are being dropped. Actually the packet was
not exactly dropped; Instead it was sent out to the original oif rather
than lo. When a packet with daddr ::1 is sent to the router, it is
effectively dropped.

Fixes: 508b09046c ("netfilter: ipv6: Preserve link scope traffic original oif")
Signed-off-by: Eli Cooper <elicooper@gmx.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-05 14:10:33 +01:00
Marc Zyngier
c8101f7729 net: dsa: Fix lockdep false positive splat
Creating a macvtap on a DSA-backed interface results in the following
splat when lockdep is enabled:

[   19.638080] IPv6: ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready
[   23.041198] device lan0 entered promiscuous mode
[   23.043445] device eth0 entered promiscuous mode
[   23.049255]
[   23.049557] ============================================
[   23.055021] WARNING: possible recursive locking detected
[   23.060490] 5.0.0-rc3-00013-g56c857a1b8d3 #118 Not tainted
[   23.066132] --------------------------------------------
[   23.071598] ip/2861 is trying to acquire lock:
[   23.076171] 00000000f61990cb (_xmit_ETHER){+...}, at: dev_set_rx_mode+0x1c/0x38
[   23.083693]
[   23.083693] but task is already holding lock:
[   23.089696] 00000000ecf0c3b4 (_xmit_ETHER){+...}, at: dev_uc_add+0x24/0x70
[   23.096774]
[   23.096774] other info that might help us debug this:
[   23.103494]  Possible unsafe locking scenario:
[   23.103494]
[   23.109584]        CPU0
[   23.112093]        ----
[   23.114601]   lock(_xmit_ETHER);
[   23.117917]   lock(_xmit_ETHER);
[   23.121233]
[   23.121233]  *** DEADLOCK ***
[   23.121233]
[   23.127325]  May be due to missing lock nesting notation
[   23.127325]
[   23.134315] 2 locks held by ip/2861:
[   23.137987]  #0: 000000003b766c72 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x338/0x4e0
[   23.146231]  #1: 00000000ecf0c3b4 (_xmit_ETHER){+...}, at: dev_uc_add+0x24/0x70
[   23.153757]
[   23.153757] stack backtrace:
[   23.158243] CPU: 0 PID: 2861 Comm: ip Not tainted 5.0.0-rc3-00013-g56c857a1b8d3 #118
[   23.166212] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT)
[   23.172843] Call trace:
[   23.175358]  dump_backtrace+0x0/0x188
[   23.179116]  show_stack+0x14/0x20
[   23.182524]  dump_stack+0xb4/0xec
[   23.185928]  __lock_acquire+0x123c/0x1860
[   23.190048]  lock_acquire+0xc8/0x248
[   23.193724]  _raw_spin_lock_bh+0x40/0x58
[   23.197755]  dev_set_rx_mode+0x1c/0x38
[   23.201607]  dev_set_promiscuity+0x3c/0x50
[   23.205820]  dsa_slave_change_rx_flags+0x5c/0x70
[   23.210567]  __dev_set_promiscuity+0x148/0x1e0
[   23.215136]  __dev_set_rx_mode+0x74/0x98
[   23.219167]  dev_uc_add+0x54/0x70
[   23.222575]  macvlan_open+0x170/0x1d0
[   23.226336]  __dev_open+0xe0/0x160
[   23.229830]  __dev_change_flags+0x16c/0x1b8
[   23.234132]  dev_change_flags+0x20/0x60
[   23.238074]  do_setlink+0x2d0/0xc50
[   23.241658]  __rtnl_newlink+0x5f8/0x6e8
[   23.245601]  rtnl_newlink+0x50/0x78
[   23.249184]  rtnetlink_rcv_msg+0x360/0x4e0
[   23.253397]  netlink_rcv_skb+0xe8/0x130
[   23.257338]  rtnetlink_rcv+0x14/0x20
[   23.261012]  netlink_unicast+0x190/0x210
[   23.265043]  netlink_sendmsg+0x288/0x350
[   23.269075]  sock_sendmsg+0x18/0x30
[   23.272659]  ___sys_sendmsg+0x29c/0x2c8
[   23.276602]  __sys_sendmsg+0x60/0xb8
[   23.280276]  __arm64_sys_sendmsg+0x1c/0x28
[   23.284488]  el0_svc_common+0xd8/0x138
[   23.288340]  el0_svc_handler+0x24/0x80
[   23.292192]  el0_svc+0x8/0xc

This looks fairly harmless (no actual deadlock occurs), and is
fixed in a similar way to c6894dec8e ("bridge: fix lockdep
addr_list_lock false positive splat") by putting the addr_list_lock
in its own lockdep class.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04 18:30:43 -08:00
Rundong Ge
17ab4f61b8 net: dsa: slave: Don't propagate flag changes on down slave interfaces
The unbalance of master's promiscuity or allmulti will happen after ifdown
and ifup a slave interface which is in a bridge.

When we ifdown a slave interface , both the 'dsa_slave_close' and
'dsa_slave_change_rx_flags' will clear the master's flags. The flags
of master will be decrease twice.
In the other hand, if we ifup the slave interface again, since the
slave's flags were cleared the 'dsa_slave_open' won't set the master's
flag, only 'dsa_slave_change_rx_flags' that triggered by 'br_add_if'
will set the master's flags. The flags of master is increase once.

Only propagating flag changes when a slave interface is up makes
sure this does not happen. The 'vlan_dev_change_rx_flags' had the
same problem and was fixed, and changes here follows that fix.

Fixes: 91da11f870 ("net: Distributed Switch Architecture protocol support")
Signed-off-by: Rundong Ge <rdong.ge@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04 18:29:35 -08:00
Petr Machata
c1f7e02979 net: cls_flower: Remove filter from mask before freeing it
In fl_change(), when adding a new rule (i.e. fold == NULL), a driver may
reject the new rule, for example due to resource exhaustion. By that
point, the new rule was already assigned a mask, and it was added to
that mask's hash table. The clean-up path that's invoked as a result of
the rejection however neglects to undo the hash table addition, and
proceeds to free the new rule, thus leaving a dangling pointer in the
hash table.

Fix by removing fnew from the mask's hash table before it is freed.

Fixes: 35cc3cefc4 ("net/sched: cls_flower: Reject duplicated rules also under skip_sw")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04 09:19:14 -08:00
Ursula Braun
84b799a292 net/smc: correct state change for peer closing
If some kind of closing is received from the peer while still in
state SMC_INIT, it means the peer has had an active connection and
closed the socket quickly before listen_work finished. This should
not result in a shortcut from state SMC_INIT to state SMC_CLOSED.
This patch adds the socket to the accept queue in state
SMC_APPCLOSEWAIT1. The socket reaches state SMC_CLOSED once being
accepted and closed with smc_release().

Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04 09:11:19 -08:00
Ursula Braun
a5e04318c8 net/smc: delete rkey first before switching to unused
Once RMBs are flagged as unused they are candidates for reuse.
Thus the LLC DELETE RKEY operaton should be made before flagging
the RMB as unused.

Fixes: c7674c001b ("net/smc: unregister rkeys of unused buffer")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04 09:11:19 -08:00
Ursula Braun
b8649efad8 net/smc: fix sender_free computation
In some scenarios a separate consumer cursor update is necessary.
The decision is made in smc_tx_consumer_cursor_update(). The
sender_free computation could be wrong:

The rx confirmed cursor is always smaller than or equal to the
rx producer cursor. The parameters in the smc_curs_diff() call
have to be exchanged, otherwise sender_free might even be negative.

And if more data arrives local_rx_ctrl.prod might be updated, enabling
a cursor difference between local_rx_ctrl.prod and rx confirmed cursor
larger than the RMB size. This case is not covered by smc_curs_diff().
Thus function smc_curs_diff_large() is introduced here.

If a recvmsg() is processed in parallel, local_tx_ctrl.cons might
change during smc_cdc_msg_send. Make sure rx_curs_confirmed is updated
with the actually sent local_tx_ctrl.cons value.

Fixes: e82f2e31f5 ("net/smc: optimize consumer cursor updates")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04 09:11:19 -08:00
Ursula Braun
ad6f317f72 net/smc: preallocated memory for rdma work requests
The work requests for rdma writes are built in local variables within
function smc_tx_rdma_write(). This violates the rule that the work
request storage has to stay till the work request is confirmed by
a completion queue response.
This patch introduces preallocated memory for these work requests.
The storage is allocated, once a link (and thus a queue pair) is
established.

Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04 09:11:19 -08:00
Pablo Neira Ayuso
f6ac858589 netfilter: nf_tables: unbind set in rule from commit path
Anonymous sets that are bound to rules from the same transaction trigger
a kernel splat from the abort path due to double set list removal and
double free.

This patch updates the logic to search for the transaction that is
responsible for creating the set and disable the set list removal and
release, given the rule is now responsible for this. Lookup is reverse
since the transaction that adds the set is likely to be at the tail of
the list.

Moreover, this patch adds the unbind step to deliver the event from the
commit path.  This should not be done from the worker thread, since we
have no guarantees of in-order delivery to the listener.

This patch removes the assumption that both activate and deactivate
callbacks need to be provided.

Fixes: cd5125d8f5 ("netfilter: nf_tables: split set destruction in deactivate and destroy phase")
Reported-by: Mikhail Morfikov <mmorfikov@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-04 17:29:17 +01:00
Martynas Pumputis
4e35c1cb94 netfilter: nf_nat: skip nat clash resolution for same-origin entries
It is possible that two concurrent packets originating from the same
socket of a connection-less protocol (e.g. UDP) can end up having
different IP_CT_DIR_REPLY tuples which results in one of the packets
being dropped.

To illustrate this, consider the following simplified scenario:

1. Packet A and B are sent at the same time from two different threads
   by same UDP socket.  No matching conntrack entry exists yet.
   Both packets cause allocation of a new conntrack entry.
2. get_unique_tuple gets called for A.  No clashing entry found.
   conntrack entry for A is added to main conntrack table.
3. get_unique_tuple is called for B and will find that the reply
   tuple of B is already taken by A.
   It will allocate a new UDP source port for B to resolve the clash.
4. conntrack entry for B cannot be added to main conntrack table
   because its ORIGINAL direction is clashing with A and the REPLY
   directions of A and B are not the same anymore due to UDP source
   port reallocation done in step 3.

This patch modifies nf_conntrack_tuple_taken so it doesn't consider
colliding reply tuples if the IP_CT_DIR_ORIGINAL tuples are equal.

[ Florian: simplify patch to not use .allow_clash setting
  and always ignore identical flows ]

Signed-off-by: Martynas Pumputis <martynas@weave.works>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-04 14:26:11 +01:00
Xin Long
cfe4bd7a25 sctp: check and update stream->out_curr when allocating stream_out
Now when using stream reconfig to add out streams, stream->out
will get re-allocated, and all old streams' information will
be copied to the new ones and the old ones will be freed.

So without stream->out_curr updated, next time when trying to
send from stream->out_curr stream, a panic would be caused.

This patch is to check and update stream->out_curr when
allocating stream_out.

v1->v2:
  - define fa_index() to get elem index from stream->out_curr.
v2->v3:
  - repost with no change.

Fixes: 5bbbbe32a4 ("sctp: introduce stream scheduler foundations")
Reported-by: Ying Xu <yinxu@redhat.com>
Reported-by: syzbot+e33a3a138267ca119c7d@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03 14:27:47 -08:00
Stefano Garzarella
85965487ab vsock/virtio: reset connected sockets on device removal
When the virtio transport device disappear, we should reset all
connected sockets in order to inform the users.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03 11:06:25 -08:00
Stefano Garzarella
22b5c0b63f vsock/virtio: fix kernel panic after device hot-unplug
virtio_vsock_remove() invokes the vsock_core_exit() also if there
are opened sockets for the AF_VSOCK protocol family. In this way
the vsock "transport" pointer is set to NULL, triggering the
kernel panic at the first socket activity.

This patch move the vsock_core_init()/vsock_core_exit() in the
virtio_vsock respectively in module_init and module_exit functions,
that cannot be invoked until there are open sockets.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1609699
Reported-by: Yan Fu <yafu@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03 11:06:25 -08:00
David S. Miller
e7b816415e Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:

====================
pull-request: bpf 2019-01-31

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) disable preemption in sender side of socket filters, from Alexei.

2) fix two potential deadlocks in syscall bpf lookup and prog_register,
   from Martin and Alexei.

3) fix BTF to allow typedef on func_proto, from Yonghong.

4) two bpftool fixes, from Jiri and Paolo.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01 15:28:07 -08:00
Eric Dumazet
9b1f19d810 dccp: fool proof ccid_hc_[rt]x_parse_options()
Similarly to commit 276bdb82de ("dccp: check ccid before dereferencing")
it is wise to test for a NULL ccid.

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.0.0-rc3+ #37
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:ccid_hc_tx_parse_options net/dccp/ccid.h:205 [inline]
RIP: 0010:dccp_parse_options+0x8d9/0x12b0 net/dccp/options.c:233
Code: c5 0f b6 75 b3 80 38 00 0f 85 d6 08 00 00 48 b9 00 00 00 00 00 fc ff df 48 8b 45 b8 4c 8b b8 f8 07 00 00 4c 89 f8 48 c1 e8 03 <80> 3c 08 00 0f 85 95 08 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b
kobject: 'loop5' (0000000080f78fc1): kobject_uevent_env
RSP: 0018:ffff8880a94df0b8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8880858ac723 RCX: dffffc0000000000
RDX: 0000000000000100 RSI: 0000000000000007 RDI: 0000000000000001
RBP: ffff8880a94df140 R08: 0000000000000001 R09: ffff888061b83a80
R10: ffffed100c370752 R11: ffff888061b83a97 R12: 0000000000000026
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0defa33518 CR3: 000000008db5e000 CR4: 00000000001406e0
kobject: 'loop5' (0000000080f78fc1): fill_kobj_path: path = '/devices/virtual/block/loop5'
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 dccp_rcv_state_process+0x2b6/0x1af6 net/dccp/input.c:654
 dccp_v4_do_rcv+0x100/0x190 net/dccp/ipv4.c:688
 sk_backlog_rcv include/net/sock.h:936 [inline]
 __sk_receive_skb+0x3a9/0xea0 net/core/sock.c:473
 dccp_v4_rcv+0x10cb/0x1f80 net/dccp/ipv4.c:880
 ip_protocol_deliver_rcu+0xb6/0xa20 net/ipv4/ip_input.c:208
 ip_local_deliver_finish+0x23b/0x390 net/ipv4/ip_input.c:234
 NF_HOOK include/linux/netfilter.h:289 [inline]
 NF_HOOK include/linux/netfilter.h:283 [inline]
 ip_local_deliver+0x1f0/0x740 net/ipv4/ip_input.c:255
 dst_input include/net/dst.h:450 [inline]
 ip_rcv_finish+0x1f4/0x2f0 net/ipv4/ip_input.c:414
 NF_HOOK include/linux/netfilter.h:289 [inline]
 NF_HOOK include/linux/netfilter.h:283 [inline]
 ip_rcv+0xed/0x620 net/ipv4/ip_input.c:524
 __netif_receive_skb_one_core+0x160/0x210 net/core/dev.c:4973
 __netif_receive_skb+0x2c/0x1c0 net/core/dev.c:5083
 process_backlog+0x206/0x750 net/core/dev.c:5923
 napi_poll net/core/dev.c:6346 [inline]
 net_rx_action+0x76d/0x1930 net/core/dev.c:6412
 __do_softirq+0x30b/0xb11 kernel/softirq.c:292
 run_ksoftirqd kernel/softirq.c:654 [inline]
 run_ksoftirqd+0x8e/0x110 kernel/softirq.c:646
 smpboot_thread_fn+0x6ab/0xa10 kernel/smpboot.c:164
 kthread+0x357/0x430 kernel/kthread.c:246
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
Modules linked in:
---[ end trace 58a0ba03bea2c376 ]---
RIP: 0010:ccid_hc_tx_parse_options net/dccp/ccid.h:205 [inline]
RIP: 0010:dccp_parse_options+0x8d9/0x12b0 net/dccp/options.c:233
Code: c5 0f b6 75 b3 80 38 00 0f 85 d6 08 00 00 48 b9 00 00 00 00 00 fc ff df 48 8b 45 b8 4c 8b b8 f8 07 00 00 4c 89 f8 48 c1 e8 03 <80> 3c 08 00 0f 85 95 08 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b
RSP: 0018:ffff8880a94df0b8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8880858ac723 RCX: dffffc0000000000
RDX: 0000000000000100 RSI: 0000000000000007 RDI: 0000000000000001
RBP: ffff8880a94df140 R08: 0000000000000001 R09: ffff888061b83a80
R10: ffffed100c370752 R11: ffff888061b83a97 R12: 0000000000000026
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0defa33518 CR3: 0000000009871000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01 14:49:10 -08:00
Karsten Graul
46ad02229d net/smc: fix use of variable in cleared area
Do not use pend->idx as index for the arrays because its value is
located in the cleared area. Use the existing local variable instead.
Without this fix the wrong area might be cleared.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01 14:45:45 -08:00
Karsten Graul
e5f3aa04db net/smc: use device link provided in qp_context
The device field of the IB event structure does not always point to the
SMC IB device. Load the pointer from the qp_context which is always
provided to smc_ib_qp_event_handler() in the priv field. And for qp
events the affected port is given in the qp structure of the ibevent,
derive it from there.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01 14:45:45 -08:00
Karsten Graul
2dee25af42 net/smc: call smc_cdc_msg_send() under send_lock
Call smc_cdc_msg_send() under the connection send_lock to make sure all
send operations for one connection are serialized.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01 14:45:45 -08:00
Karsten Graul
33f3fcc290 net/smc: do not wait under send_lock
smc_cdc_get_free_slot() might wait for free transfer buffers when using
SMC-R. This wait should not be done under the send_lock, which is a
spin_lock. This fixes a cpu loop in parallel threads waiting for the
send_lock.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01 14:45:45 -08:00
Karsten Graul
51c5aba3b6 net/smc: recvmsg and splice_read should return 0 after shutdown
When a socket was connected and is now shut down for read, return 0 to
indicate end of data in recvmsg and splice_read (like TCP) and do not
return ENOTCONN. This behavior is required by the socket api.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01 14:45:45 -08:00
Karsten Graul
6889b36da7 net/smc: don't wait for send buffer space when data was already sent
When there is no more send buffer space and at least 1 byte was already
sent then return to user space. The wait is only done when no data was
sent by the sendmsg() call.
This fixes smc_tx_sendmsg() which tried to always send all user data and
started to wait for free send buffer space when needed. During this wait
the user space program was blocked in the sendmsg() call and hence not
able to receive incoming data. When both sides were in such a situation
then the connection stalled forever.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01 14:45:44 -08:00
Karsten Graul
77f838ace7 net/smc: prevent races between smc_lgr_terminate() and smc_conn_free()
To prevent races between smc_lgr_terminate() and smc_conn_free() add an
extra check of the lgr field before accessing it, and cancel a delayed
free_work when a new smc connection is created.
This fixes the problem that free_work cleared the lgr variable but
smc_lgr_terminate() or smc_conn_free() still access it in parallel.

Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01 14:45:44 -08:00
Hans Wippel
ca8dc1334a net/smc: allow 16 byte pnetids in netlink policy
Currently, users can only send pnetids with a maximum length of 15 bytes
over the SMC netlink interface although the maximum pnetid length is 16
bytes. This patch changes the SMC netlink policy to accept 16 byte
pnetids.

Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01 14:45:44 -08:00
Ursula Braun
14d22d4d61 net/smc: fix another sizeof to int comparison
Comparing an int to a size, which is unsigned, causes the int to become
unsigned, giving the wrong result. kernel_sendmsg can return a negative
error code.

Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01 14:45:44 -08:00