Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce struct feat_fd. This patch uses it as a wrapper around fd in
write_* functions for feature headers. Next patches will extend its
functionality to other feature header functions.
This patch does not change behavior.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-7-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that writen takes a const buffer, use it in do_write instead of
duplicating its functionality.
Export do_write to use it consistently in header.c and build_id.c .
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-6-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If a stripped binary is placed in the cache, the user is in a situation
where there's a cached elf file present, but it doesn't have any symtab
to use for name resolution. Grab the debuginfo for binaries that don't
end in .ko. This yields a better chance of resolving symbols from older
traces.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1499305693-1599-7-git-send-email-kjlx@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Teach buildid-cache how to add, remove, and update binary objects from
other mount namespaces. Allow probe events tracing binaries in
different namespaces to add their objects to the probe and build-id
caches too. As a handy side effect, this also lets us access SDT probes
in binaries from alternate mount namespaces.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1499305693-1599-5-git-send-email-kjlx@templeofstupid.com
[ Add util/namespaces.c to tools/perf/util/python-ext-sources, to fix the python binding 'perf test' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit e7ee404757 ("perf symbols: Fix symbols searching for module
in buildid-cache") added the function to check kernel modules reside in
the build-id cache. This was because there's no way to identify a DSO
which is actually a kernel module. So it searched linkname of the file
and find ".ko" suffix.
But this does not work for compressed kernel modules and now such DSOs
hCcave correct symtab_type now. So no need to check it anymore. This
patch essentially reverts the commit.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The files using the dirent.h routines should instead include it,
reducing the includes hell that lead to longer build times.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-42g2f4z6nfg7mdb2ae97n7tj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Disentangling util.h header mess a bit more.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-aj6je8ly377i4upedmjzdsq6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are places where we just need a forward declaration, and others
were we need to include strlist.h and/or strfilter.h, reducing the
impact of changes in headers on the build time, do it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-zab42gbiki88y9k0csorxekb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing it from util.h, part of an effort to disentangle the includes
hell, that makes changes to util.h or something included by it to cause
a complete rebuild of the tools.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ztrjy52q1rqcchuy3rubfgt2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
More stuff that came from git, out of the hodge-podge that is util.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-e3lana4gctz3ub4hn4y29hkw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Valgrind was complaining:
$ valgrind ./perf list >/dev/null
==11643== Memcheck, a memory error detector
==11643== Copyright (C) 2002-2015, and GNU GPL'd, by Julian Seward et al.
==11643== Using Valgrind-3.12.0 and LibVEX; rerun with -h for copyright info
==11643== Command: ./perf list
==11643==
==11643== Conditional jump or move depends on uninitialised value(s)
==11643== at 0x4C30620: rindex (vg_replace_strmem.c:199)
==11643== by 0x49DAA9: build_id_cache__origname (build-id.c:198)
==11643== by 0x49E1C7: build_id_cache__valid_id (build-id.c:222)
==11643== by 0x49E1C7: build_id_cache__list_all (build-id.c:507)
==11643== by 0x4B9C8F: print_sdt_events (parse-events.c:2067)
==11643== by 0x4BB0B3: print_events (parse-events.c:2313)
==11643== by 0x439501: cmd_list (builtin-list.c:53)
==11643== by 0x497150: run_builtin (perf.c:359)
==11643== by 0x428CE0: handle_internal_command (perf.c:421)
==11643== by 0x428CE0: run_argv (perf.c:467)
==11643== by 0x428CE0: main (perf.c:614)
[...]
Additionally, a zero length result from readlink() is not very interesting.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170322130624.21881-3-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Valgrind was complaining:
==2633== Syscall param open(filename) points to unaddressable byte(s)
==2633== at 0x5281CC0: __open_nocancel (syscall-template.S:84)
==2633== by 0x537D38: open (fcntl2.h:53)
==2633== by 0x537D38: get_sdt_note_list (symbol-elf.c:2017)
==2633== by 0x5396FD: probe_cache__scan_sdt (probe-file.c:700)
==2633== by 0x49EA2C: build_id_cache__add_sdt_cache (build-id.c:625)
==2633== by 0x49EA2C: build_id_cache__add_s (build-id.c:697)
==2633== by 0x49EE72: build_id_cache__add_b (build-id.c:717)
==2633== by 0x49EE72: dso__cache_build_id (build-id.c:782)
==2633== by 0x49F190: __dsos__cache_build_ids (build-id.c:793)
==2633== by 0x49F190: machine__cache_build_ids (build-id.c:801)
==2633== by 0x49F190: perf_session__cache_build_ids (build-id.c:815)
==2633== by 0x4CD4F2: write_build_id (header.c:165)
==2633== by 0x4D26F7: do_write_feat (header.c:2296)
==2633== by 0x4D26F7: perf_header__adds_write (header.c:2335)
==2633== by 0x4D26F7: perf_session__write_header (header.c:2414)
==2633== by 0x43B324: __cmd_record (builtin-record.c:1154)
==2633== by 0x43B324: cmd_record (builtin-record.c:1839)
==2633== by 0x455A07: __cmd_record (builtin-kmem.c:1868)
==2633== by 0x455A07: cmd_kmem (builtin-kmem.c:1944)
==2633== by 0x497150: run_builtin (perf.c:359)
==2633== by 0x428CE0: handle_internal_command (perf.c:421)
==2633== by 0x428CE0: run_argv (perf.c:467)
==2633== by 0x428CE0: main (perf.c:614)
==2633== Address 0x0 is not stack'd, malloc'd or (recently) free'd
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Link: http://lkml.kernel.org/r/20170322130624.21881-2-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Two SDT debug messages can occur for every DSO which is too noisy.
Consequently, increase debug level of SDT messages.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support @BUILDID or @FILE suffix for SDT events. This allows perf to add
probes on SDTs/pre-cached events on given FILE or the file which has
given BUILDID (also, this complements BUILDID.)
For example, both gcc and libstdc++ has same SDTs as below. If you
would like to add a probe on sdt_libstdcxx:catch on gcc, you can do as
below.
----
# perf list sdt | tail -n 6
sdt_libstdcxx:catch@/usr/bin/gcc(0cc207fc4b27) [SDT event]
sdt_libstdcxx:catch@/usr/lib64/libstdc++.so.6.0.20(91c7a88fdf49)
sdt_libstdcxx:rethrow@/usr/bin/gcc(0cc207fc4b27) [SDT event]
sdt_libstdcxx:rethrow@/usr/lib64/libstdc++.so.6.0.20(91c7a88fdf49)
sdt_libstdcxx:throw@/usr/bin/gcc(0cc207fc4b27) [SDT event]
sdt_libstdcxx:throw@/usr/lib64/libstdc++.so.6.0.20(91c7a88fdf49)
# perf probe -a %sdt_libstdcxx:catch@0cc
Added new event:
sdt_libstdcxx:catch (on %catch in /usr/bin/gcc)
You can now use it in all perf tools, such as:
perf record -e sdt_libstdcxx:catch -aR sleep 1
----
Committer note:
Doing the full sequence of steps to get the results above:
With a clean build-id cache:
[root@jouet ~]# rm -rf ~/.debug/
[root@jouet ~]# perf list sdt
List of pre-defined events (to be used in -e):
[root@jouet ~]#
No events whatsoever, then, we can add all events in gcc to the build-id
cache, doing a --add + --dry-run:
[root@jouet ~]# perf probe --dry-run --cache -x /usr/bin/gcc --add %sdt_libstdcxx:\*
Added new events:
sdt_libstdcxx:throw (on %* in /usr/bin/gcc)
sdt_libstdcxx:rethrow (on %* in /usr/bin/gcc)
sdt_libstdcxx:catch (on %* in /usr/bin/gcc)
You can now use it in all perf tools, such as:
perf record -e sdt_libstdcxx:catch -aR sleep 1
[root@jouet ~]#
It really didn't add any events, it just cached them:
[root@jouet ~]# perf probe -l
[root@jouet ~]#
We can see that it was cached as:
[root@jouet ~]# ls -la ~/.debug/usr/bin/gcc/9a0730e2bcc6d2a2003d21ac46807e8ee6bcb7c2/
total 976
drwxr-xr-x. 2 root root 4096 Jul 13 21:47 .
drwxr-xr-x. 3 root root 4096 Jul 13 21:47 ..
-rwxr-xr-x. 4 root root 985912 Jun 22 18:52 elf
-rw-r--r--. 1 root root 303 Jul 13 21:47 probes
[root@jouet ~]# file ~/.debug/usr/bin/gcc/9a0730e2bcc6d2a2003d21ac46807e8ee6bcb7c2/elf
/root/.debug/usr/bin/gcc/9a0730e2bcc6d2a2003d21ac46807e8ee6bcb7c2/elf: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=9a0730e2bcc6d2a2003d21ac46807e8ee6bcb7c2, stripped
[root@jouet ~]# cat ~/.debug/usr/bin/gcc/9a0730e2bcc6d2a2003d21ac46807e8ee6bcb7c2/probes
%sdt_libstdcxx:throw=throw
p:sdt_libstdcxx/throw /usr/bin/gcc:0x71ffd
%sdt_libstdcxx:rethrow=rethrow
p:sdt_libstdcxx/rethrow /usr/bin/gcc:0x720b8
%sdt_libstdcxx:catch=catch
p:sdt_libstdcxx/catch /usr/bin/gcc:0x7307f
%sdt_libgcc:unwind=unwind
p:sdt_libgcc/unwind /usr/bin/gcc:0x7eec0
#sdt_libstdcxx:*=%*
[root@jouet ~]#
Ok, now we can use 'perf probe' to refer to those cached entries as:
Humm, nope, doing as above we end up with:
[root@jouet ~]# perf probe -a %sdt_libstdcxx:catch
Semantic error :* is bad for event name -it must follow C symbol-naming rule.
Error: Failed to add events.
[root@jouet ~]#
But it worked at some point, lets try not using --dry-run:
Resetting everything:
# rm -rf ~/.debug/
# perf probe -d *:*
# perf probe -l
# perf list sdt
List of pre-defined events (to be used in -e):
#
Ok, now it cached everything, even things we haven't asked it to
(sdt_libgcc:unwind):
[root@jouet ~]# perf probe -x /usr/bin/gcc --add %sdt_libstdcxx:\*
Added new events:
sdt_libstdcxx:throw (on %* in /usr/bin/gcc)
sdt_libstdcxx:rethrow (on %* in /usr/bin/gcc)
sdt_libstdcxx:catch (on %* in /usr/bin/gcc)
You can now use it in all perf tools, such as:
perf record -e sdt_libstdcxx:catch -aR sleep 1
[root@jouet ~]# perf list sdt
List of pre-defined events (to be used in -e):
sdt_libgcc:unwind [SDT event]
sdt_libstdcxx:catch [SDT event]
sdt_libstdcxx:rethrow [SDT event]
sdt_libstdcxx:throw [SDT event]
[root@jouet ~]#
And we have the events in place:
[root@jouet ~]# perf probe -l
sdt_libstdcxx:catch (on execute_cfa_program+1551@../../../libgcc/unwind-dw2.c in /usr/bin/gcc)
sdt_libstdcxx:rethrow (on d_print_subexpr+280@libsupc++/cp-demangle.c in /usr/bin/gcc)
sdt_libstdcxx:throw (on d_print_subexpr+93@libsupc++/cp-demangle.c in /usr/bin/gcc)
[root@jouet ~]#
And trying to use them at least has 'perf trace --event sdt*:*' working.
Then, if we try to add the ones in libstdc++:
[root@jouet ~]# perf probe -x /usr/lib64/libstdc++.so.6 -a %sdt_libstdcxx:\*
Error: event "catch" already exists.
Hint: Remove existing event by 'perf probe -d'
or force duplicates by 'perf probe -f'
or set 'force=yes' in BPF source.
Error: Failed to add events.
[root@jouet ~]#
Doesn't work, dups, but at least this served to, unbeknownst to the user, add
the SDT probes in /usr/lib64/libstdc++.so.6!
[root@jouet ~]# perf list sdt
List of pre-defined events (to be used in -e):
sdt_libgcc:unwind [SDT event]
sdt_libstdcxx:catch@/usr/bin/gcc(9a0730e2bcc6) [SDT event]
sdt_libstdcxx:catch@/usr/lib64/libstdc++.so.6.0.22(ef2b7066559a) [SDT event]
sdt_libstdcxx:rethrow@/usr/bin/gcc(9a0730e2bcc6) [SDT event]
sdt_libstdcxx:rethrow@/usr/lib64/libstdc++.so.6.0.22(ef2b7066559a) [SDT event]
sdt_libstdcxx:throw@/usr/bin/gcc(9a0730e2bcc6) [SDT event]
sdt_libstdcxx:throw@/usr/lib64/libstdc++.so.6.0.22(ef2b7066559a) [SDT event]
[root@jouet ~]#
Now we should be able to get to the original cset comment, if we remove all
SDTs events in place, not from the cache, from the kernel, where it was set up as:
[root@jouet ~]# ls -la /sys/kernel/debug/tracing/events/sdt_libstdcxx/
total 0
drwxr-xr-x. 5 root root 0 Jul 13 22:00 .
drwxr-xr-x. 80 root root 0 Jul 13 21:56 ..
drwxr-xr-x. 2 root root 0 Jul 13 22:00 catch
-rw-r--r--. 1 root root 0 Jul 13 22:00 enable
-rw-r--r--. 1 root root 0 Jul 13 22:00 filter
drwxr-xr-x. 2 root root 0 Jul 13 22:00 rethrow
drwxr-xr-x. 2 root root 0 Jul 13 22:00 throw
[root@jouet ~]#
[root@jouet ~]# head -2 /sys/kernel/debug/tracing/events/sdt_libstdcxx/throw/format
name: throw
ID: 2059
[root@jouet ~]#
Now to remove it:
[root@jouet ~]# perf probe -d sdt_libstdc*:*
Removed event: sdt_libstdcxx:catch
Removed event: sdt_libstdcxx:rethrow
Removed event: sdt_libstdcxx:throw
[root@jouet ~]#
Which caused:
[root@jouet ~]# ls -la /sys/kernel/debug/tracing/events/sdt_libstdcxx/
ls: cannot access '/sys/kernel/debug/tracing/events/sdt_libstdcxx/': No such file or directory
[root@jouet ~]#
Ok, now we can do:
[root@jouet ~]# perf list sdt_libstdcxx:catch
List of pre-defined events (to be used in -e):
sdt_libstdcxx:catch@/usr/bin/gcc(9a0730e2bcc6) [SDT event]
sdt_libstdcxx:catch@/usr/lib64/libstdc++.so.6.0.22(ef2b7066559a) [SDT event]
[root@jouet ~]#
So, these are not really 'pre-defined events', i.e. we can't use them with
'perf record --event':
[root@jouet ~]# perf record --event sdt_libstdcxx:catch*
event syntax error: 'sdt_libstdcxx:catch*'
\___ unknown tracepoint
Error: File /sys/kernel/debug/tracing/events/sdt_libstdcxx/catch* not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
<SNIP>
[root@jouet ~]#
To have it really pre-defined we must use perf probe to get its definition from
the cache and set it up in the kernel, creating the tracepoint to _then_ use it
with 'perf record --event':
[root@jouet ~]# perf probe -a sdt_libstdcxx:catch
Semantic error :There is non-digit char in line number.
<SNIP>
Oops, there is another gotcha here, we need that pesky '%' character:
[root@jouet ~]# perf probe -a %sdt_libstdcxx:catch
Added new events:
sdt_libstdcxx:catch (on %catch in /usr/bin/gcc)
sdt_libstdcxx:catch_1 (on %catch in /usr/lib64/libstdc++.so.6.0.22)
You can now use it in all perf tools, such as:
perf record -e sdt_libstdcxx:catch_1 -aR sleep 1
[root@jouet ~]#
But then we added _two_ events, one with the name we expected, the other one
with a _ added, when doing the analysis we need to pay attention to who maps to
who.
And here is where we get to the point of this patch, which is to be able to
disambiguate those definitions for 'catch' in the build-id cache, but first we need
remove those events we just added:
[root@jouet ~]# perf probe -d %sdt_libstdcxx:catch
Oops, that didn't remove anything, we need to _remove_ that % char in this case:
[root@jouet ~]# perf probe -d sdt_libstdcxx:catch
Removed event: sdt_libstdcxx:catch
And we need to remove the other event added, i.e. I forgot to add a * at the end:
[root@jouet ~]# perf probe -d sdt_libstdcxx:catch*
Removed event: sdt_libstdcxx:catch_1
[root@jouet ~]#
Ok, disambiguating it using what is in this patch:
[root@jouet ~]# perf list sdt_libstdcxx:catch
List of pre-defined events (to be used in -e):
sdt_libstdcxx:catch@/usr/bin/gcc(9a0730e2bcc6) [SDT event]
sdt_libstdcxx:catch@/usr/lib64/libstdc++.so.6.0.22(ef2b7066559a) [SDT event]
[root@jouet ~]#
[root@jouet ~]# perf probe -a %sdt_libstdcxx:catch@9a07
Added new event:
sdt_libstdcxx:catch (on %catch in /usr/bin/gcc)
You can now use it in all perf tools, such as:
perf record -e sdt_libstdcxx:catch -aR sleep 1
[root@jouet ~]# perf probe -l
sdt_libstdcxx:catch (on execute_cfa_program+1551@../../../libgcc/unwind-dw2.c in /usr/bin/gcc)
[root@jouet ~]#
Yeah, it works! But we need to try and simplify this :-)
Update: Some aspects of this simplification take place in the following
patches.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146831793746.17065.13065062753978236612.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make "perf probe --cache --list" show only available cached events by
checking build-id validity.
E.g. without this patch:
----
$ ./perf probe --cache --add oldevent=cmd_probe
$ make #(to update ./perf)
$ ./perf probe --cache --add newevent=cmd_probe
$ ./perf probe --cache --list
/home/mhiramat/ksrc/linux/tools/perf/perf (061e90539bac69
probe_perf:newevent=cmd_probe
/home/mhiramat/ksrc/linux/tools/perf/perf (c2e44d614e33e1
probe_perf:oldevent=cmd_probe
----
It shows both of old and new events but user can not use old one.
With this;
----
$ ./perf probe --cache -l
/home/mhiramat/ksrc/linux/tools/perf/perf (061e90539bac69
probe_perf:newevent=cmd_probe
----
This shows only new events which are on the existing binary.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146831789417.17065.17896487479879669610.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That is not present on some libelf implementations, such as the one used
in Alpine Linux: libelf-0.8.13.
This ends up disabling the SDT code, that relies on this function.
One alternative would be to provide an weak fallback implementation or
the open coded variant used by the buildid sysfs notes reading code.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-82lh22ybedy9b9lych8xj12g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf buildid-cache --add <binary> scans given binary and add
the SDT events to probe cache. "sdt_" prefix is appended for
all SDT providers to avoid event-name clash with other pre-defined
events. It is possible to use the cached SDT events as other cached
events, via perf probe --add "sdt_<provider>:<event>=<event>".
e.g.
----
# perf buildid-cache --add /lib/libc-2.17.so
# perf probe --cache --list | head -n 5
/usr/lib/libc-2.17.so (a6fb821bdf53660eb2c29f778757aef294d3d392):
sdt_libc:setjmp=setjmp
sdt_libc:longjmp=longjmp
sdt_libc:longjmp_target=longjmp_target
sdt_libc:memory_heap_new=memory_heap_new
# perf probe -x /usr/lib/libc-2.17.so \
-a sdt_libc:memory_heap_new=memory_heap_new
Added new event:
sdt_libc:memory_heap_new (on memory_heap_new
in /usr/lib/libc-2.17.so)
You can now use it in all perf tools, such as:
perf record -e sdt_libc:memory_heap_new -aR sleep 1
# perf probe -l
sdt_libc:memory_heap_new (on new_heap+183 in /usr/lib/libc-2.17.so)
----
Note that SDT event entries in probe-cache file is somewhat different
from normal cached events. Normal one starts with "#", but SDTs are
starting with "%".
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146736025058.27797.13043265488541434502.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename and export build_id_cache__cachedir() for retrieving use of the
path of cache directory for given build_id.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160608092930.3116.67575.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
build_id_cache__kallsyms_path() accepts a string buffer but also allocs
a buffer using asnprintf. Unfortunately, the its only user passes it a
stack-allocated buffer. Freeing it causes crashes like this:
$ perf script
*** Error in `/home/wangnan/perf': free(): invalid pointer: 0x00007fffffff9630 ***
======= Backtrace: =========
lib64/libc.so.6(+0x6eeef)[0x7ffff5dbaeef]
lib64/libc.so.6(+0x78cae)[0x7ffff5dc4cae]
lib64/libc.so.6(+0x79987)[0x7ffff5dc5987]
/home/w00229757/perf(build_id_cache__kallsyms_path+0x6b)[0x49681b]
/home/w00229757/perf[0x4bdd40]
/home/w00229757/perf(dso__load+0xa3a)[0x4c048a]
/home/w00229757/perf(map__load+0x6f)[0x4d561f]
/home/w00229757/perf(thread__find_addr_map+0x235)[0x49e935]
/home/w00229757/perf(machine__resolve+0x7d)[0x49ec6d]
/home/w00229757/perf[0x4555a8]
/home/w00229757/perf[0x4d9507]
/home/w00229757/perf[0x4d9e80]
/home/w00229757/perf(ordered_events__flush+0x354)[0x4dd444]
/home/w00229757/perf(perf_session__process_events+0x3d0)[0x4dc140]
/home/w00229757/perf(cmd_script+0x12b0)[0x4592e0]
/home/w00229757/perf[0x4911f1]
/home/w00229757/perf(main+0x68f)[0x4352ef]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x7ffff5d6dbd5]
/home/w00229757/perf[0x435415]
======= Memory map: ========
This patch simplifies build_id_cache__kallsyms_path(), not even
considering allocating a string buffer, so never frees anything. Its
caller should manage memory allocation.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Fixes: 01412261d9 ("perf buildid-cache: Use path/to/bin/buildid/elf instead of path/to/bin/buildid")
Link: http://lkml.kernel.org/r/1465271678-7392-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use path/to/bin/buildid/elf instead of path/to/bin/buildid
to store corresponding elf binary.
This also stores vdso in buildid/vdso, kallsyms in buildid/kallsyms.
Note that the existing caches are not updated until user adds
or updates the cache. Anyway, if there is the old style build-id
cache it falls back to use it. (IOW, it is backward compatible)
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160528151537.16098.85815.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When unwinding callchains on a different machine, vdso info should be
available so the unwind process won't be interrupted if address falls
into vdso region. But in most cases, the addresses of sample events are
not in vdso range, the buildid of a zero hit vdso won't be stored into
perf.data.
This patch stores vdso buildid regardless of whether the vdso is hit or
not.
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1463042596-61703-3-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use new lsdir() for looking up buildid caches. This changes logic a bit
to ignore all dot files, since the build-id cache must not start with
dot.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160511135217.23943.94596.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
write_buildid() increments 'name_len' with intention to take into
account trailing zero byte. However, 'name_len' was already incremented
in machine__write_buildid_table() before. So this leads to
out-of-bounds read in do_write():
$ ./perf record sleep 0
[ perf record: Woken up 1 times to write data ]
=================================================================
==15899==ERROR: AddressSanitizer: global-buffer-overflow on address 0x00000099fc92 at pc 0x7f1aa9c7eab5 bp 0x7fff940f84d0 sp 0x7fff940f7c78
READ of size 19 at 0x00000099fc92 thread T0
#0 0x7f1aa9c7eab4 (/usr/lib/gcc/x86_64-pc-linux-gnu/5.3.0/libasan.so.2+0x44ab4)
#1 0x649c5b in do_write util/header.c:67
#2 0x649c5b in write_padded util/header.c:82
#3 0x57e8bc in write_buildid util/build-id.c:239
#4 0x57e8bc in machine__write_buildid_table util/build-id.c:278
...
0x00000099fc92 is located 0 bytes to the right of global variable '*.LC99' defined in 'util/symbol.c' (0x99fc80) of size 18
'*.LC99' is ascii string '[kernel.kallsyms]'
...
Shadow bytes around the buggy address:
0x00008012bf80: f9 f9 f9 f9 00 00 00 00 00 00 03 f9 f9 f9 f9 f9
=>0x00008012bf90: 00 00[02]f9 f9 f9 f9 f9 00 00 00 00 00 05 f9 f9
0x00008012bfa0: f9 f9 f9 f9 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461053847-5633-1-git-send-email-aryabinin@virtuozzo.com
[ Remove the off-by one at the origin, to keep len(s) == strlen(s) assumption ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid parsing event->header.misc in many locations.
This will also allow setting perf.sample.{ip,cpumode} in a single place,
from tracepoint fields, as needed by 'perf kvm' with PPC guests, where
the guest hardware counters is not available at the host.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qp3yradhyt6q3wl895b1aat0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before this patch, if a sample is triggered inside a module not in
/lib/modules/`uname -r`/, even if the module is in buildid-cache, 'perf
report' will still be unable to find the correct symbol. For example:
# rm -rf ~/.debug/
# perf buildid-cache -a ./mymodule.ko
# perf probe -m ./mymodule.ko -a get_mymodule_val
Added new event:
probe:get_mymodule_val (on get_mymodule_val in mymodule)
You can now use it in all perf tools, such as:
perf record -e probe:get_mymodule_val -aR sleep 1
# perf record -e probe:get_mymodule_val cat /proc/mymodule
mymodule:3
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ]
# perf report --stdio
[SNIP]
#
# Overhead Command Shared Object Symbol
# ........ ....... ................ ......................
#
100.00% cat [mymodule] [k] 0x0000000000000001
# perf report -vvvv --stdio
dso__load_sym: adjusting symbol: st_value: 0 sh_addr: 0 sh_offset: 0x70
symbol__new: get_mymodule_val 0x70-0x8a
[SNIP]
This is caused by dso__load() -> dso__load_sym(). In dso__load(), kmod
is true only when its file is found in some well know directories. All
files loaded from buildid-cache are treated as user programs. Following
dso__load_sym() set map->pgoff incorrectly.
This patch gives kernel modules in buildid-cache a chance to adjust
value of kmod. After dso__load() get the type of symbols, if it is
buildid, check the last 3 chars of original filename against '.ko', and
adjust the value of kmod if the file is a kernel module.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1454680939-24963-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a nasty confusion that, for kernel module, dso->kernel is not
necessary to be DSO_TYPE_KERNEL or DSO_TYPE_GUEST_KERNEL. These two
enums are for vmlinux. See thread [1]. We tried to fix this part but it
is costy.
Code machine__write_buildid_table() is another unfortunate function fall
into this trap that, when issuing buildid event for a kernel module,
cpumode it gives to the event is PERF_RECORD_MISC_USER, not
PERF_RECORD_MISC_KERNEL.
However, even with this bug, most of the time it doesn't causes real
problem. I find this issue when trying to use a perf before commit
3d39ac5386 ("perf machine: No need to have two DSOs lists") to parse a
perf.data generated by newest perf.
[1] https://lkml.org/lkml/2015/9/21/908
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1454089251-203152-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --kernel option of perf buildid-list tool should show the running
kernel buildid. The functionality has been lost during other changes of
the related code.
The build_id__sprintf() function should return length of the build-id
string, but it was the length of the build-id raw data instead. Due to
that, some return value checking caused that the final string was not
printed out.
With this patch the build_id__sprintf() returns the correct value, so
the --kernel option works again.
Before:
# perf buildid-list --kernel
#
After:
# perf buildid-list --kernel
972c1edab5bdc06cc224af45d510af662a3c6972
#
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LPU-Reference: 1448632089.24573.114.camel@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf buildid-list' processes events to determine hits (i.e. with-hits
option). That may not work if events are not sorted in order. i.e. MMAP
events must be processed before the samples that depend on them so that
sample processing can 'hit' the DSO to which the MMAP refers.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1447408112-1920-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce SBUILD_ID_SIZE macro and use it instead of using BUILD_ID_SIZE
* 2 + 1.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150715091428.8915.75265.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can pass more info to strlist__new() without having to change
its function signature, just adding entries to the strlist_config struct
with sensible defaults for when those fields are not specified.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5uaaler4931i0s9sedxjquhq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can, given a DSO, figure out if it is a kernel, a kernel module or
a userlevel DSO, so stop having to process two lists in several
functions.
If searching becomes an issue at some point, we can have them in a
rbtree, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-s4yb0onpdywu6dj2xl9lxi4t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
commit: f3b623b849 ("perf tools: Reference count struct thread")
appends every thread->node to dead_threads in machine__remove_thread()
and list_del_init() this node in thread__put().
perf_event__exit_del_thread() releases thread wihout using
machine__remove_thread(), and causes a NULL pointer crash when
list_del_init(&thread->node) is called. Fix this by using
machine_remove_thread() instead of using thread__put() directly.
This problem can be reproduced as following:
$ perf record ls
$ perf buildid-list --with-hits
[ 3874.195070] perf[1018]: segfault at 0 ip 00000000004b0b15 sp
00007ffc35b44780 error 6 in perf[400000+166000]
Segmentation fault
After this patch:
$ perf record ls
$ perf buildid-list --with-hits
bc23e7c3281e542650ba4324421d6acf78f4c23e /proc/kcore
643324cb0e969f30c56d660f167f84a150845511 [vdso]
0000000000000000000000000000000000000000 /bin/busybox
...
Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1428658500-6483-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
int build_id_cache__add_s(const char *sbuild_id, const char *debugdir,
const char *name, bool is_kallsyms, bool is_vdso)
{
...
if (access(filename, F_OK)) {
^--------------------------------------------------------- [1]
if (is_kallsyms) {
if (copyfile("/proc/kallsyms", filename))
goto out_free;
} else if (link(realname, filename) && copyfile(name, filename))
^-----------------------------^------------- [2]
\------------ [3]
goto out_free;
}
...
When multiple instances of perf record get to [1] at more or less same time and
run access() one or more may get failure because the file does not exist yet
(since the first instance did not have chance to link it yet).
At this point the race moves to link() at [2] where first thread to get
there links file and goes on but second one gets -EEXIST so it runs
copyfile [3] which truncates the file.
reproducer:
rm -rf /root/.debug
for cpu in $(awk '/processor/ {print $3}' /proc/cpuinfo); do
perf record -a -v -T -F 1000 -C $cpu \
-o perf-${cpu}.data sleep 5 2> /dev/null &
done
wait
and simply search for empty files by:
find /lib/modules/`uname -r`/kernel/* -size 0
Signed-off-by: Milos Vyletel <milos@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1426847846-11112-1-git-send-email-milos@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to do that to stop accumulating entries in the dead_threads
linked list, i.e. we were keeping references to threads in struct hists
that continue to exist even after a thread exited and was removed from
the machine threads rbtree.
We still keep the dead_threads list, but just for debugging, allowing us
to iterate at any given point over the threads that still are referenced
by things like struct hist_entry.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3ejvfyed0r7ue61dkurzjux4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --purge FILE to remove all caches of FILE.
Since the current --remove FILE removes a cache which has
same build-id of given FILE. Since the command takes a
FILE path, it can confuse user who tries to remove cache
about FILE path.
-----
# ./perf buildid-cache -v --add ./perf
Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok
# (update the ./perf binary)
# ./perf buildid-cache -v --remove ./perf
Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL
./perf wasn't in the cache
-----
Actually, the --remove's FAIL is not shown, it just silently fails.
So, this patch adds --purge FILE action for such usecase.
perf buildid-cache --purge FILE removes all caches which has same FILE
path.
In other words, it removes all caches including old binaries.
-----
# ./perf buildid-cache -v --add ./perf
Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok
# (update the ./perf binary)
# ./perf buildid-cache -v --purge ./perf
Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok
-----
BTW, if you want to purge all the caches, remove ~/.debug/* .
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain
[ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add new buildid cache if the update target file is not cached.
This can happen when an old binary is replaced by new one after caching
the old one. In this case, user sees his operation just failed.
But it does not look straight, since user just pass the binary "path",
not "build-id".
----
# ./perf buildid-cache --add ./perf
(update ./perf to new binary)
# ./perf buildid-cache --update ./perf
./perf wasn't in the cache
#
----
This patch adds given new binary to cache if the new binary is
not cached. So we'll not see the above error.
----
# ./perf buildid-cache --add ./perf
(update ./perf to new binary)
# ./perf buildid-cache --update ./perf
#
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150226065440.23912.1494.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Consolidate .build-id cache path generating routines to
build_id__filename() function. Other functions must use it to get the
buildid cache path (link path) from build-id. This can reduce the risk
of partial-update.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150210091853.19264.58513.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Functions related to buildid-cache subcommand use debugdir parameters
for passing buildid cache directory path. However all callers just pass
buildid_dir global variable. Moreover, other functions which refer
buildid cache use buildid_dir directly.
This removes unneeded debugdir parameters from those functions and use
buildid_dir if needed.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150210091851.19264.72741.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need to copy over the buildid_dir into separate variable with
no change.
This is leftover from commit:
45de34bbe3 perf buildid: add perfconfig option to specify buildid cache dir
that added global buildid_dir variable that holds cache directory, but
did not cleanup the debugdir copies.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1417460789-13874-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'd be better managing those functions in a separate place as
util/header.c file is already big.
It now exports following 3 functions to others:
bool perf_session__read_build_ids(struct perf_session *session, bool with_hits);
int perf_session__write_buildid_table(struct perf_session *session, int fd);
int perf_session__cache_build_ids(struct perf_session *session);
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/545733E7.6010105@intel.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1415063674-17206-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So stop passing both machine and thread to several thread methods,
reducing function signature length.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ckcy19dcp1jfkmdihdjcqdn1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I believe that passing pid (instead of tid) as the 3rd arg of the
machine__find*_thread() was to find a main thread so that it can
search proper map group for symbols. However with the map sharing
patch applied, it now can do it in any thread.
It fixes a bug when each thread has different name, it only reports a
main thread for samples in other threads.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1399856202-26221-1-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
