Pull i2c updates from Wolfram Sang:
- mainly feature additions to drivers (stm32f7, qup, xlp9xx, mlxcpld, ...)
- conversion to use the i2c_8bit_addr_from_msg macro consistently
- move includes to platform_data
- core updates to allow the (still in review) I3C subsystem to connect
- and the regular share of smaller driver updates
* 'i2c/for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (68 commits)
i2c: qup: fix building without CONFIG_ACPI
i2c: tegra: Remove suspend-resume
i2c: imx-lpi2c: Switch to SPDX identifier
i2c: mxs: Switch to SPDX identifier
i2c: busses: make use of i2c_8bit_addr_from_msg
i2c: algos: make use of i2c_8bit_addr_from_msg
i2c: rcar: document R8A77980 bindings
i2c: qup: Add command-line parameter to override SCL frequency
i2c: qup: Correct duty cycle for FM and FM+
i2c: qup: Add support for Fast Mode Plus
i2c: qup: add probe path for Centriq ACPI devices
i2c: robotfuzz-osif: drop pointless test
i2c: robotfuzz-osif: remove pointless local variable
i2c: rk3x: Don't print visible virtual mapping MMIO address
i2c: opal: don't check number of messages in the driver
i2c: ibm_iic: don't check number of messages in the driver
i2c: imx: Switch to SPDX identifier
i2c: mux: pca954x: merge calls to of_match_device and of_device_get_match_data
i2c: mux: demux-pinctrl: use proper parent device for demux adapter
i2c: mux: improve error message for failed symlink
...
- Additional struct_size() conversions (Matthew, Kees)
- Explicitly reported overflow fixes (Silvio, Kees)
- Add missing kvcalloc() function (Kees)
- Treewide conversions of allocators to use either 2-factor argument
variant when available, or array_size() and array3_size() as needed (Kees)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=zUUp
-----END PGP SIGNATURE-----
Merge tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more overflow updates from Kees Cook:
"The rest of the overflow changes for v4.18-rc1.
This includes the explicit overflow fixes from Silvio, further
struct_size() conversions from Matthew, and a bug fix from Dan.
But the bulk of it is the treewide conversions to use either the
2-factor argument allocators (e.g. kmalloc(a * b, ...) into
kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a *
b) into vmalloc(array_size(a, b)).
Coccinelle was fighting me on several fronts, so I've done a bunch of
manual whitespace updates in the patches as well.
Summary:
- Error path bug fix for overflow tests (Dan)
- Additional struct_size() conversions (Matthew, Kees)
- Explicitly reported overflow fixes (Silvio, Kees)
- Add missing kvcalloc() function (Kees)
- Treewide conversions of allocators to use either 2-factor argument
variant when available, or array_size() and array3_size() as needed
(Kees)"
* tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
treewide: Use array_size in f2fs_kvzalloc()
treewide: Use array_size() in f2fs_kzalloc()
treewide: Use array_size() in f2fs_kmalloc()
treewide: Use array_size() in sock_kmalloc()
treewide: Use array_size() in kvzalloc_node()
treewide: Use array_size() in vzalloc_node()
treewide: Use array_size() in vzalloc()
treewide: Use array_size() in vmalloc()
treewide: devm_kzalloc() -> devm_kcalloc()
treewide: devm_kmalloc() -> devm_kmalloc_array()
treewide: kvzalloc() -> kvcalloc()
treewide: kvmalloc() -> kvmalloc_array()
treewide: kzalloc_node() -> kcalloc_node()
treewide: kzalloc() -> kcalloc()
treewide: kmalloc() -> kmalloc_array()
mm: Introduce kvcalloc()
video: uvesafb: Fix integer overflow in allocation
UBIFS: Fix potential integer overflow in allocation
leds: Use struct_size() in allocation
Convert intel uncore to struct_size
...
Here are the main updates for SoC support (besides DT additions) for ARM
32- and 64-bit platforms. The branch also contains defconfig updates to
turn on drivers and options as needed on the various platforms.
The largest parts of the delta are from cleanups moving platform data
and board file setup of TI platforms to ti-sysc bus drivers. There are
also some sweeping changes of eeprom and nand setup on Davinci, i.MX
and other platforms.
Samsung is removing support for Exynos5440, which was an oddball SoC
that hasn't been seen much use in designs.
Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).
Linus Walleij is also removing support for ux500 (Sony Ericsson)
U8540/9540 SoCs that never made it to significant mass production and
products.
-----BEGIN PGP SIGNATURE-----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=S5wc
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Olof Johansson:
"Here are the main updates for SoC support (besides DT additions) for
ARM 32- and 64-bit platforms. The branch also contains defconfig
updates to turn on drivers and options as needed on the various
platforms.
The largest parts of the delta are from cleanups moving platform data
and board file setup of TI platforms to ti-sysc bus drivers. There are
also some sweeping changes of eeprom and nand setup on Davinci, i.MX
and other platforms.
Samsung is removing support for Exynos5440, which was an oddball SoC
that hasn't been seen much use in designs.
Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).
Linus Walleij is also removing support for ux500 (Sony Ericsson)
U8540/9540 SoCs that never made it to significant mass production and
products"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
MAINTAINERS: add NXP linux team maillist as i.MX reviewer
ARM: stm32: Don't select DMA unconditionally on STM32MP157C
arm64: defconfig: Enable PCIe on msm8996 and db820c
ARM: pxa3xx: enable external wakeup pins
ARM: pxa: stargate2: use device properties for at24 eeprom
arm64: defconfig: Enable HISILICON_LPC
arm64: defconfig: enable drivers for Poplar support
arm64: defconfig: Enable UFS on msm8996
ARM: berlin: switch to SPDX license identifier
arm: berlin: remove non-necessary flush_cache_all()
ARM: berlin: extend BG2CD Kconfig entry
OMAP: CLK: CLKSRC: Add suspend resume hooks
ARM: AM43XX: Add functions to save/restore am43xx control registers
ASoC: ams_delta: use GPIO lookup table
ARM: OMAP1: ams-delta: add GPIO lookup tables
bus: ti-sysc: Fix optional clocks array access
ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared
ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore
ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO
ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore
...
This series contains two omap1 ams-delta GPIO clean-up patches to get
started with removal of hard-coded GPIO numbers from drivers. And then
the removal of board mach includes from drivers. The second patch mostly
touches the ams-delta audio driver but is included here because of the
removal of the latch gpios and is acked by Mark Brown.
And there are two more am437x related PM patches to save and restore
control module and timer registers for RTC only suspend mode. Looks like
the patch title for the timer changes is a bit misleading, not all the
timer code is yet living under drivers/clocksource. But I had already
pushed out the branch before I noticed this.
-----BEGIN PGP SIGNATURE-----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=gBpR
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.18/soc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Late omap soc changes for v4.18 merge window
This series contains two omap1 ams-delta GPIO clean-up patches to get
started with removal of hard-coded GPIO numbers from drivers. And then
the removal of board mach includes from drivers. The second patch mostly
touches the ams-delta audio driver but is included here because of the
removal of the latch gpios and is acked by Mark Brown.
And there are two more am437x related PM patches to save and restore
control module and timer registers for RTC only suspend mode. Looks like
the patch title for the timer changes is a bit misleading, not all the
timer code is yet living under drivers/clocksource. But I had already
pushed out the branch before I noticed this.
* tag 'omap-for-v4.18/soc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
OMAP: CLK: CLKSRC: Add suspend resume hooks
ARM: AM43XX: Add functions to save/restore am43xx control registers
ASoC: ams_delta: use GPIO lookup table
ARM: OMAP1: ams-delta: add GPIO lookup tables
Signed-off-by: Olof Johansson <olof@lixom.net>
This series mostly adds saving of power and clock domain registers for
am335x/am437x suspend to RTC only mode. There is also a non-urgent fix
for omap4 PM where we could end up losing GPIO interrupts if bootloader
has LOGICRETSTATE cleared for domains. And there is a clean-up patch for
omap1 to use device properties for at24 eeprom.
-----BEGIN PGP SIGNATURE-----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=KF8d
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.18/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
SoC changes for omap variants for v4.18 merge window
This series mostly adds saving of power and clock domain registers for
am335x/am437x suspend to RTC only mode. There is also a non-urgent fix
for omap4 PM where we could end up losing GPIO interrupts if bootloader
has LOGICRETSTATE cleared for domains. And there is a clean-up patch for
omap1 to use device properties for at24 eeprom.
* tag 'omap-for-v4.18/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared
ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore
ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO
ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore
ARM: OMAP2+: Add functions to save and restore powerdomain context
ARM: OMAP2+: clockdomain: Inroduce cpu_pm notifiers for context save/restore
ARM: OMAP2+: Add functions to save and restore clockdomain context en-masse.
ARM: omap1: osk: use device properties for at24 eeprom
Signed-off-by: Olof Johansson <olof@lixom.net>
Add the save and restore for clksrc as part of suspend and resume
so that it saves the counter value and restores. This is needed in
modes like rtc+ddr in self-refresh not doing this stalls the time.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
These registers are part of the wkup domain and are lost during RTC only
suspend and also hibernation, so storing/restoring their state is
necessary.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We may have LOGICRETSTATE cleared by the bootloader or kexec boot.
Currently this means we will see lost GPIO interrupts at least for
network interfaces such as wlcore and smsc911x if PER hits retention.
Let's fix the issue by making sure LOGICRETSTATE is set. Once we have
GPIOs working with wakeirqs then we should be able to clear it.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Inroduce cpu_pm notifiers for context save/restore. This will be
needed for am43xx family in case of rtc only mode with ddr in
self-refresh.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
There are two registers on am43x needed for IO daisy chain wake to work
properly, however currently after an RTC+DDR cycle they are lost. We
must take care to save and restore these before and after entering RTC
mode otherwise IO daisy chain wake will stop working from DeepSleep
after resuming.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Inroduce cpu_pm notifiers for context save/restore. This is
needed for am43xx family during rtc only mode with ddr in
self-refresh.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The powerdomain control registers are stored in the WKUP powerdomain on
AM33XX/AM43XX, which is lost on RTC-only suspend and also hibernate. This
adds context save and restore functions for those registers.
Sometimes the powerdomain state does not need to change,
perhaps we only need to change memory retention states, so make
sure the restored state is different from the current state before we wait
for a transition.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Inroduce cpu_pm notifiers for context save/restore. This will be
needed for am43xx family in case of rtc only mode with ddr in
self-refresh.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This is used to support suspend modes like RTC-only and hibernate where
the state of the registers controlling clockdomains is lost.
Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This header only contains platform_data. Move it to the proper directory.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Tony Lindgren <tony@atomide.com>
This series improves the ti-sysc interconnect target module driver to
the point where a most of SoC can be booted with interconnect target
module data configured in device tree instead of legacy platform data.
The related device tree changes need some more work though, and can
wait for v4.19. Also some drivers using nested interconnects like DSS
need more work.
We can now remove the unused pm-noop code that is not doing anything
any longer. And we can now initialize things for PM and display pdata
later to prepare things for using ti-sysc driver.
We also need to add some more quirk handling so we can boot both with
platform data and dts data.
-----BEGIN PGP SIGNATURE-----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=jYZ6
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.18/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
ti-sysc driver related changes for omap variants
This series improves the ti-sysc interconnect target module driver to
the point where a most of SoC can be booted with interconnect target
module data configured in device tree instead of legacy platform data.
The related device tree changes need some more work though, and can
wait for v4.19. Also some drivers using nested interconnects like DSS
need more work.
We can now remove the unused pm-noop code that is not doing anything
any longer. And we can now initialize things for PM and display pdata
later to prepare things for using ti-sysc driver.
We also need to add some more quirk handling so we can boot both with
platform data and dts data.
* tag 'omap-for-v4.18/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Show module information for suspend if DEBUG is enabled
bus: ti-sysc: Tag sdio and wdt with legacy mode for suspend
bus: ti-sysc: Detect UARTs for SYSC_QUIRK_LEGACY_IDLE quirk on omap4
bus: ti-sysc: Detect omap4 type timers for quirk
bus: ti-sysc: Add initial support for external resets
bus: ti-sysc: Improve suspend and resume handling
bus: ti-sysc: Tag some modules resource providers for noirq suspend
bus: ti-sysc: Add handling for clkctrl opt clocks
bus: ti-sysc: Make child clock alias handling more generic
bus: ti-sysc: Handle simple-bus for nested children
ARM: OMAP2+: Make display related init into device_initcall
ARM: OMAP2+: Initialize SoC PM later
ARM: OMAP2+: Only probe SDMA via ti-sysc if configured in dts
ARM: OMAP2+: Use signed value for sysc register offsets
ARM: OMAP2+: Allow using ti-sysc for system timers
ARM: OMAP2+: Drop unused pm-noop
Signed-off-by: Olof Johansson <olof@lixom.net>
smp_processor_id() checks preemption if CONFIG_DEBUG_PREEMPT is enabled,
causing a warning dump during boot:
[ 5.042377] BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
[ 5.050281] caller is pwrdm_set_next_pwrst+0x48/0x88
[ 5.055330] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.24-g57341df0b4 #1
Use the raw_smp_processor_id() for the trace instead, this value does
not need to be perfectly correct. The alternative of disabling preempt
is too heavy weight operation to be applied in PM hot path for just
tracing purposes.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can initialize almost everything at normal module_init time with
ti-sysc except for clocks and timers. To prepare for that, let's make
display init into device_initcall as otherwise we'll be calling
of_platform_populate() before the parent has probed.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
There's no need to probe devices until at module_init time and we
currently have at least PM trying to use I2C for PMICs early on.
As only a part of the SoC init_early is SoC specific, we only need to call
the SoC specific PM init function. And we can modify omap2_common_pm_late_init()
so it becomes a late_initcall().
Note that this changes am335x to call omap2_clk_enable_autoidle_all() that
seems to be missing currently.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We still have some SDMA probing using omap_device_build() for the
arch/arm/plat-omap/dma.c part that the dmaengine driver then uses.
So we still need to ensure that omap_device_build() works even if we
probe and manage the dmaengine driver via ti-sysc. And we don't want
to call dev_pm_domain_set() as otherwise we'd also have omap_device
try to manage the hardware in addition to ti-sysc.
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We currently don't know if a revision register exists or not. Zero is
often a valid offset for the revision register. As we are still checking
device tree data against platform data, we will get bogus warnings with
correct device tree data because of incomplete platform data.
Let's fix the issue by using signed offsets and tag the revision registers
that don't exist with -ENODEV, and init the missing ones with the correct
revision register offset.
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
If a system timer is configured with an interrconnect target module in
the dts, the ti,hwmods and module fck are at the interconnect target
level. Then there's a separate fck for the timer child device.
If the child device has a separate functional clock, we need to configure
it directly. For example, timer clk clkctrl clock bit 0 is the module
clock for the interconnect target, and bit 24 being the functional clock
for the timer IP.
For system timers, we already mark them as disabled. Now must also mark
the interconnect target module as disabled to prevent ti-sysc to manage
it instead of the system timer.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The sleep33xx and sleep43xx files should not depend on a header file
generated in drivers/memory. Remove this dependency and instead allow
both drivers/memory and arch/arm/mach-omap2 to generate all macros
needed in headers local to their own paths.
This fixes an issue where the build fail will when using O= to set a
split object directory and arch/arm/mach-omap2 is built before
drivers/memory with the following error:
.../drivers/memory/emif-asm-offsets.c:1:0: fatal error: can't open
drivers/memory/emif-asm-offsets.s for writing: No such file or directory
compilation terminated.
Fixes: 41d9d44d72 ("ARM: OMAP2+: pm33xx-core: Add platform code needed for PM")
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Looks like these functions don't do anything in the mainline kernel so
we can just drop it.
Note that we must now also remove ir-rx51 pdata as it relies on the dummy
platform data that does not do anything. And ir-rx51 is calling a pdata
callback that doesn't do anything without checking if it exists first.
For configuring device specific minimal latencies, the interface to use
is pm_qos_add_request(). For an example, see what was done in commit
9834ffd1ec ("ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent
glitches"). I've added some comments to ir-rx51 so people using it can
add pm_qos support and test it.
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
When CONFIG_CACHE_L2X0 is disabled, the am43xx specific suspend
implemnentation fails to link:
arch/arm/mach-omap2/sleep43xx.o: In function `get_l2cache_base':
(.text+0x180): undefined reference to `omap4_get_l2cache_base'
This adds an #ifdef protection around the code, like we do for am44xx.
Fixes: 41d37e6137 ("ARM: OMAP2+: Introduce low-level suspend code for AM43XX")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On omap5 there is an aux control module that we are not handling
currently for clocks, so let's add support for it.
-----BEGIN PGP SIGNATURE-----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=WMHn
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.17/soc-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "Two omap5 specific aux control module patches for v4.17" from Tony Lindgren:
On omap5 there is an aux control module that we are not handling
currently for clocks, so let's add support for it.
* tag 'omap-for-v4.17/soc-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP5: control: add support for control module wkup pad config
ARM: omap2+: control: add support for auxiliary control module instances
Match the new compatible string in the control module driver. The base
infra maps the required syscon ranges and clock registers if available.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Control module can have multiple instances in a system, each with separate
address space and features. Add base support for these auxiliary instances,
with support for syscon and clock mappings under them.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This series of changes enables the use device tree based sysconfig
data for ti-sysc driver. As we already have SmartReflex data configured,
we use that as the first driver to enable. To do that in a way where
SmartReflex is not probed twice, we need to prepare the SmartReflex
driver before flipping dts data on for it in the last patch of the
series.
To avoid regressions, we are checking the passed dts data against
existing platform data since we still have it available. Then after the
dts files are converted, we can simply drop the related platform data
at some point in the future.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlqdehERHHRvbnlAYXRv
bWlkZS5jb20ACgkQG9Q+yVyrpXMRihAA2jlmAf4dePwe0K5V1VlQINbAU/FV+tXN
1oasvGwNBxaJMqJeZAdBd/veuXgrsprIbmlMmF+zP/wQDYiMccr0+ZvzMsUKJ9aA
mgzpW/pkpZEbi0ncci4UhQVOuZLja1xxtQ+ZGx82Vo7MXyU2jU9/Wzk67B4BZLws
1MGTsy5VZZh+wicq46eW9AspvFhKCMIw6Ylor3lfmm08H3V/cq9A8dHQeWX2jjsC
hSw9RzglGMi58FQ8cqNkxbD38r1VZh74OOqzOOlcJ5CwLWzIJwanWfwDesVb4ZTL
bdrn/Aps5b223LTAFN97vwUmyux/ja17YyCC5fU6C6wskgN+9jhPSslzFbFbU0kT
4chc5OYcdq5Lhm+vLCe2H5rB14KQxy6Ugb6aT+XAUOq0hw6tRSG17kqlXk/KtwrG
cDzPJzPjG/PDb8hW0Bd7JcjLqadmh7w1180KtT+9IayQM50XxcwwAOPT0XdUEUeP
aKIp5cRfOm/75KUIiNomhmoAd1pxX1G6y2qo49p3fbY0nJx09MgtQvWlbDrbhL8+
ACp2adGAlLqsW26E44cqNwMPPhyVcQXlVD9bc2D04nVhXapvRHtlrW4cRkkbQzfw
dAiQHDaBn4geSBUqGayQaIvX1WWqeZ6nzpI0JlyHPMiQdkdDvtyUqhJuK2uaY39n
vyRPw2H09ZM=
=/hJY
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.17/ti-sysc-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "Driver changes for ti-sysc for v4.17" from Tony Lindgren:
This series of changes enables the use device tree based sysconfig
data for ti-sysc driver. As we already have SmartReflex data configured,
we use that as the first driver to enable. To do that in a way where
SmartReflex is not probed twice, we need to prepare the SmartReflex
driver before flipping dts data on for it in the last patch of the
series.
To avoid regressions, we are checking the passed dts data against
existing platform data since we still have it available. Then after the
dts files are converted, we can simply drop the related platform data
at some point in the future.
* tag 'omap-for-v4.17/ti-sysc-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Enable ti-sysc to use device tree data for smartreflex
PM / AVS: SmartReflex: Prepare to use device tree based probing
ARM: OMAP2+: Try to parse earlycon from parent too
ARM: OMAP2+: Add checks for device tree based sysconfig data
ARM: OMAP2+: Add functions to allocate module data from device tree
bus: ti-sysc: Handle some devices in omap_device compatible way
bus: ti-sysc: Add support for platform data callbacks
bus: ti-sysc: Remove unnecessary debugging statements
bus: ti-sysc: Improve handling for no-reset-on-init and no-idle-on-init
bus: ti-sysc: Handle stdout-path for debug console
bus: ti-sysc: Add suspend and resume handling
bus: ti-sysc: Add fck clock alias for children with notifier_block
ARM: OMAP2+: Prepare to pass auxdata for smartreflex
This series of changes from Dave Gerlach adds the PM related
code to allow low-power suspend states. The code consists of
the SoC specific assembly code and a related PM driver.
-----BEGIN PGP SIGNATURE-----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=hBzh
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.17/am-pm-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "Add am335x and am437x PM code for v4.17" from Tony Lindgren:
This series of changes from Dave Gerlach adds the PM related
code to allow low-power suspend states. The code consists of
the SoC specific assembly code and a related PM driver.
* tag 'omap-for-v4.17/am-pm-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
soc: ti: Add pm33xx driver for basic suspend support
ARM: OMAP2+: pm33xx-core: Add platform code needed for PM
ARM: OMAP2+: Introduce low-level suspend code for AM43XX
ARM: OMAP2+: Introduce low-level suspend code for AM33XX
This series from Keerthy and Ladislav Michl move omap dmtimer code
to drivers. As we don't want to export custom timer functions to
random drivers, we also need to update the related PWM driver to
pass the timer specific functions in platform data.
Note that this series is based on a merge of omap1 specific timer
fix and omap2+ platform data clean-up to keep things working and
make the move a bit simpler.
-----BEGIN PGP SIGNATURE-----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=2B8N
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.17/timer-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "Move omap timer to drivers for 4.17" from Tony Lindgren:
This series from Keerthy and Ladislav Michl move omap dmtimer code
to drivers. As we don't want to export custom timer functions to
random drivers, we also need to update the related PWM driver to
pass the timer specific functions in platform data.
Note that this series is based on a merge of omap1 specific timer
fix and omap2+ platform data clean-up to keep things working and
make the move a bit simpler.
* tag 'omap-for-v4.17/timer-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
clocksource: timer-ti-dm: Check prescaler value
clocksource: timer-ti-dm: Consolidate set source
clocksource: timer-ti-dm: Make unexported functions static
ARM: OMAP: pdata-quirks: Remove unused timer pdata
pwm: pwm-omap-dmtimer: Adapt driver to utilize dmtimer pdata ops
clocksource: timer-ti-dm: Hook device platform data if not already assigned
clocksource: timer-ti-dm: Populate the timer ops to the pdata
clocksource: timer-ti-dm: Add timer ops to the platform data structure
ARM: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksource
clocksource: timer-ti-dm: Replace architecture
ARM: OMAP: Move dmtimer.h out of plat-omap
ARM: OMAP: timer: Wrap the inline functions under OMAP2PLUS define
ARM: OMAP: dmtimer: Remove all the exports
ARM: OMAP: Fix dmtimer init for omap1
Let's enable ti-sysc probing of child devices. So far we have only used
ti-sysc to probe interconnect target modules to idle them for cases where
the SoC does not have any child devices configured for the module, such
as smartreflex on dra7.
As we have smartreflex driver configured in the device tree for some SoCs,
we need to flip things on with a single patch to prevent both omap_device
and ti-sysc to probe smartreflex. So let's stop probing smartreflex with
omap_device and probe it with ti-sysc by enabling passing the auxdata.
Signed-off-by: Tony Lindgren <tony@atomide.com>
With ti-sysc driver the "ti,hwmods" property will be moved to the
interconnect target module instead of the child device. To keep
earlycon working, we need to match against the interconnect target
module in the ti-sysc case.
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can check the device tree based sysconfig data against the existing
platform data to make sure we're not introducing regressions. Then at
some point after the sysconfig data comes from device tree, we can just
drop the related platform data.
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can have ti-sysc driver manage the interconnect target module via
platform data callback functions to hwmod code. This allows initializing
and idling the devices using dts data instead of the legacy static data
for interconnect target modules.
Let's add functions to configure the module sysconfig data with platform
callbacks from ti-sysc driver.
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can use just v7_invalidate_l1 here instead of v7_flush_dcache_all
like the comments say.
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Most of the PM code needed for am335x and am437x can be moved into a
module under drivers but some core code must remain in mach-omap2 at the
moment. This includes some internal clockdomain APIs and low-level ARM
APIs which are also not exported for use by modules.
Implement a few functions that handle these low-level platform
operations can be passed to the pm33xx module through the use of
platform data.
In addition to this, to be able to share data structures between C and
the sleep33xx and sleep43xx assembly code, we can automatically generate
all of the C struct member offsets and sizes as macros by processing
pm-asm-offsets.c into assembly code and then extracting the relevant
data as is done for the generated platform asm-offsets.h files.
Finally, add amx3_common_pm_init to create a dummy platform_device for
pm33xx so that our soon to be introduced pm33xx module can probe on
am335x and am437x platforms to enable basic suspend to mem and standby
support.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Although similar to AM33XX, introduce a new low-level asm file for
suspend containing new context save and restore paths for EMIF and l2
cache disabling and enabling.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
In preparation for suspend-resume support for AM33XX, add
the assembly file with the code which is copied to internal
memory (OCMC RAM) during bootup and runs from there.
As part of the low power entry (DeepSleep0 mode in AM33XX TRM),
the code running from OCMC RAM does the following
1. Calls routine to store the EMIF configuration
2. Calls routine to place external memory in self-refresh
3. Disables EMIF clock
4. Executes WFI after writing to MPU_CLKCTRL register.
If no interrupts have come, WFI execution on MPU gets registered
as an interrupt with the WKUP-M3. WKUP-M3 takes care of disabling
some clocks which MPU should not (L3, L4, OCMC RAM etc) and takes
care of clockdomain and powerdomain transitions as part of the
DeepSleep0 mode entry.
In case a late interrupt comes in, WFI ends up as a NOP and MPU
continues execution from internal memory. The 'abort path' code
undoes whatever was done as part of the low power entry and indicates
a suspend failure by passing a non-zero value to the cpu_resume routine.
The 'resume path' code is similar to the 'abort path' with the key
difference of MMU being enabled in the 'abort path' but being
disabled in the 'resume path' due to MPU getting powered off.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We want to pass the device tree configuration for interconnect target
modules from ti-sysc driver to the existing platform hwmod code.
This allows us to first validate the dts data against the existing
platform data before we start dropping the platform data in favor of
device tree data.
To do this, let's add platform data callbacks for PM runtime functions
to call for the interconnect target modules if platform data is
available.
Note that as ti-sysc driver can rebind, omap_auxdata_lookup and related
functions can no longer be __init.
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are still initializing smartreflex with platform data using
omap_device_build(). We can instead pass the platform data in
with auxdata in pdata-quirks.c and make the driver use that
in later patches.
Note that we cannot enable the auxdata use yet, this is done
in the last patch of the series.
Signed-off-by: Tony Lindgren <tony@atomide.com>
The header file is currently under plat-omap directory
under arch/omap. Move this out to an accessible place.
No Code changes done to the header file and renamed to timer-ti-dm.h.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Drop stale references to the generic and OMAP gpio header
files from couple of files which no longer invoke any gpio
functions.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The current contents of plat/i2c.h are only relevant for OMAP1
platforms, as all the equivalent functions for OMAP2 has been
dropped in commit 65fa3e719f ("ARM: OMAP2+: Remove legacy i2c.c
platform init code"), and which has also moved the left-over code
from plat-omap into mach-omap1. The hwmod is a concept only
applicable for OMAP2 platforms, and the omap_i2c_reset() is
already declared in mach-omap2/i2c.h. So, move the current
plat/i2c.h header file into the mach-omap1 folder, and adjust
the header usage accordingly.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The omap_mcbsp_dev_attr data was used to supply instance-specific
data for legacy non-DT devices. The legacy McBSP device support
including the usage of the hwmod class revision data has been
dropped in commit 48f6693790 ("ARM: OMAP2+: Remove unused legacy
code for McBSP") and this data is therefore no longer needed.
So, cleanup the structure and all the associated data in various
hwmod data files.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The omap2_spi_dev_attr data was used to supply instance-specific
data for legacy non-DT devices. The SPI legacy device support
including the usage of the hwmod class revision data has been
dropped in commit 6f3ab009a1 ("ARM: OMAP2+: Remove unused legacy
code for device init") and this data is therefore no longer needed.
So, cleanup the structure and all the associated data in various
hwmod data files.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The omap_timer_capability_dev_attr data was used to supply instance
specific capabilities (like always-on, PWM functionality or ability
to interrupt DSP cores) for legacy non-DT devices. These capabilities
are now provided through device-tree properties. The legacy device
support has been cleaned up in commit 8d39ff3d16 ("ARM: OMAP2+:
Remove unused legacy code for timer") and this data is therefore
no longer needed. So, cleanup the structure and all the associated
data in various hwmod data files.
While at this, remove the stale header in hwmod data files that
already do not have any timer capability data.
Cc: Keerthy <j-keerthy@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The omap_i2c_dev_attr data was used to supply instance-specific
data for legacy non-DT devices. The I2C legacy device support has
been cleaned up in commit 65fa3e719f ("ARM: OMAP2+: Remove legacy
i2c.c platform init code") and this data is therefore no longer
needed. So, cleanup the structure and all the associated data in
various hwmod data files.
The i2c-omap.h header is still needed because of the need for
various OMAP_I2C_IP_VERSION_x macros.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The omap_gpio_dev_attr data was used to supply instance-specific
data for legacy non-DT devices. The GPIO legacy device support has
been cleaned up in commit 14944934f8 ("ARM: OMAP2+: Remove legacy
gpio code") a while ago and this data is therefore no longer needed.
So, cleanup the structure and all the associated data in various
hwmod data files.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This is needed in preparation for dropping some unused
headers that indirectly include types.h.
Tested-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
HS omaps use irq_save_secure_context() instead of irq_save_context()
so sar_base will never get initialized and irq_sar_clear() gets called
with a wrong address for HS omaps from irq_restore_context().
Starting with commit f4b9f40ae9 ("ARM: OMAP4+: Initialize SAR RAM
base early for proper CPU1 reset for kexec") we have it available,
and this ideally would been fixed with that commit already.
Fixes: f4b9f40ae9 ("ARM: OMAP4+: Initialize SAR RAM base early for
proper CPU1 reset for kexec")
Cc: Andrew F. Davis <afd@ti.com>
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
For platform_suspend_ops, the finish call is too late to re-enable wake
irqs and we need re-enable wake irqs on wake call instead.
Otherwise noirq resume for devices has already happened. And then
dev_pm_disarm_wake_irq() has already disabled the dedicated wake irqs
when the interrupt triggers and the wake irq is never handled.
For devices that are already in PM runtime suspended state when we
enter suspend this means that a possible wake irq will never trigger.
And this can lead into a situation where a device has a pending padconf
wake irq, and the device will stay unresponsive to any further wake
irqs.
This issue can be easily reproduced by setting serial console log level
to zero, letting the serial console idle, and suspend the system from
an ssh terminal. Then try to wake up the system by typing to the serial
console.
Note that this affects only omap3 PRM interrupt as that's currently
the only omap variant that does anything in omap_pm_wake().
In general, for the wake irqs to work, the interrupt must have either
IRQF_NO_SUSPEND or IRQF_EARLY_RESUME set for it to trigger before
dev_pm_disarm_wake_irq() disables the wake irqs.
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
When more than one GP timers are used as kernel system timers and the
corresponding nodes in device-tree are marked with the same "disabled"
property, then the "attr" field of the property will be initialized
more than once as the property being added to sys file system via
__of_add_property_sysfs().
In __of_add_property_sysfs(), the "name" field of pp->attr.attr is set
directly to the return value of safe_name(), without taking care of
whether it's already a valid pointer to a memory block. If it is, its
old value will always be overwritten by the new one and the memory block
allocated before will a "ghost", then a kmemleak happened.
That the same "disabled" property being added to different nodes of device
tree would cause that kind of kmemleak overhead, at least once.
To fix it, allocate the property dynamically, and delete static one.
Signed-off-by: Qi Hou <qi.hou@windriver.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
A number of new drivers get added this time, along with many low-priority
bugfixes. The most interesting changes by subsystem are:
bus drivers:
- Updates to the Broadcom bus interface driver to support newer SoC types
- The TI OMAP sysc driver now supports updated DT bindings
memory controllers:
- A new driver for Tegra186 gets added
- A new driver for the ti-emif sram, to allow relocating
suspend/resume handlers there
SoC specific:
- A new driver for Qualcomm QMI, the interface to the modem on MSM SoCs
- A new driver for power domains on the actions S700 SoC
- A driver for the Xilinx Zynq VCU logicoreIP
reset controllers:
- A new driver for Amlogic Meson-AGX
- various bug fixes
tee subsystem:
- A new user interface got added to enable asynchronous communication
with the TEE supplicant.
- A new method of using user space memory for communication with
the TEE is added
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJac0fQAAoJEGCrR//JCVIntjEQALc6kflEGJc/FPundbx9V3F/
b+3+EX/uMnBnKsgZprz9ACPhx5eBH9QWja3A1zmIarb5c+q7zbBZDwhzUb8J8Yg8
xEb0im7Wx/GcKjUYZVKYBxtz9KjkXDzhrq8IAvPg6ShNcIy/8hq7ZO3iOkGsTDcy
/PyioWKC5g0dhJgtp91X1kgog5tuTaWOg39uUOqyEzwVu1vYVa4w+eeCzjEd6I//
68R/zDQ52+hWw6WZGoYOsNYzuriOflnJRnNpwuGhMhLNULBJfWnd4hkqGm4E+hFa
5dzW6vVAdIqjemFqPzCBT2WB4UG871aZX8DJ9HgnfX+g970nlsm1JY8Ck9MJNJum
aDkqZG41ArUYzDFWu8vJ2SKsue5lEZp6TEO2mLEVYrdOjOgedj0Zxqmq2DYeigxd
+ccOVgKJ9SsYw9ft1LkQ5BHCgOh3C7y9Kcg7oBnaEI5OTVvtf5PwEkT2cwbvgxYl
EVKLhlJ0Af+QXOW8E5JbNQETpYw52DMm6UKHiYn/JCGxB/8J0bgJzImDJI4Dtu2h
zqJITKJeTepqbfA5pmNfKa+20RhmsktdRCw2NN/QynY7EEtGjHAUVnlpZT2mrDco
0m62b7Erek/776vJN5ECzE5e6XCs2N0MDE6Anp121C5zEmig/SMBrUosMzP7Jnis
IDVC/QWkb3u85wK20Vc1
=yz0k
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A number of new drivers get added this time, along with many
low-priority bugfixes. The most interesting changes by subsystem are:
bus drivers:
- Updates to the Broadcom bus interface driver to support newer SoC
types
- The TI OMAP sysc driver now supports updated DT bindings
memory controllers:
- A new driver for Tegra186 gets added
- A new driver for the ti-emif sram, to allow relocating
suspend/resume handlers there
SoC specific:
- A new driver for Qualcomm QMI, the interface to the modem on MSM
SoCs
- A new driver for power domains on the actions S700 SoC
- A driver for the Xilinx Zynq VCU logicoreIP
reset controllers:
- A new driver for Amlogic Meson-AGX
- various bug fixes
tee subsystem:
- A new user interface got added to enable asynchronous communication
with the TEE supplicant.
- A new method of using user space memory for communication with the
TEE is added"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (84 commits)
of: platform: fix OF node refcount leak
soc: fsl: guts: Add a NULL check for devm_kasprintf()
bus: ti-sysc: Fix smartreflex sysc mask
psci: add CPU_IDLE dependency
soc: xilinx: Fix Kconfig alignment
soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv
soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu
soc: bcm: brcmstb: Be multi-platform compatible
soc: brcmstb: biuctrl: exit without warning on non brcmstb platforms
Revert "soc: brcmstb: Only register SoC device on STB platforms"
bus: omap: add MODULE_LICENSE tags
soc: brcmstb: Only register SoC device on STB platforms
tee: shm: Potential NULL dereference calling tee_shm_register()
soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver
dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver
soc: xilinx: Create folder structure for soc specific drivers
of: platform: populate /firmware/ node from of_platform_default_populate_init()
soc: samsung: Add SPDX license identifiers
soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe()
tee: shm: don't put_page on null shm->pages
...
These are mostly minor bugfixes, cleanup and many defconfig updates to
support added drivers. In particular OMAP and PXA keep cleaning up the
legacy code base, as usual.
Nvidia adds some more SoC support code for Tegra 186.
For the first time on years, we are actually adding a non-DT platform for,
the EP93xx based Liebherr controller BK3.1. It's a minor variation of
the EP93xx reference design and in active use, while EP93xx apparently
doesn't have enough new development to have any device tree support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=frm4
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"These are mostly minor bugfixes, cleanup and many defconfig updates to
support added drivers. In particular OMAP and PXA keep cleaning up the
legacy code base, as usual.
Nvidia adds some more SoC support code for Tegra 186.
For the first time on years, we are actually adding a non-DT platform
for the EP93xx based Liebherr controller BK3.1. It's a minor variation
of the EP93xx reference design and in active use, while EP93xx
apparently doesn't have enough new development to have any device tree
support"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
ARM: omap: hwmod: fix section mismatch warnings
ARM: pxa/tosa-bt: add MODULE_LICENSE tag
arm64: defconfig: enable CONFIG_ACPI_APEI_EINJ
arm64: defconfig: enable EDAC GHES option
arm64: defconfig: enable CONFIG_ACPI_APEI_MEMORY_FAILURE
ARM: imx_v6_v7_defconfig: enable CONFIG_CPU_FREQ_STAT
Wind down ARM/TANGO port
ARM: davinci: constify gpio_led
ARM: davinci: drop unneeded newline
soc: Add SoC driver for Gemini
ARM: SAMSUNG: Add SPDX license identifiers
ARM: S5PV210: Add SPDX license identifiers
ARM: S3C64XX: Add SPDX license identifiers
ARM: S3C24XX: Add SPDX license identifiers
ARM: EXYNOS: Add SPDX license identifiers
ARM: imx: remove unused imx3 pm definitions
ARM: imx: don't abort MMDC probe if power saving status doesn't match
ARM: imx_v6_v7_defconfig: enable RTC_DRV_MXC_V2
ARM: imx_v6_v7_defconfig: Add missing config for DART-MX6 SoM
ARM: davinci: Use PTR_ERR_OR_ZERO()
...
We get a moderate number of new machines this time, and only one
new SoC variant (Actions S700):
Actions:
S700 Soc and CubieBoard7 development board
Allo.com Sparky Single-board-computer
Allwinner:
Orange Pi R1 development board
Libre Computer Board ALL-H3-CC H3 single-board computer
ASpeed ast2x00:
Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500
Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500
Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400
AT91:
Axentia Nattis/Natte digital signage
sama5d2 PTC-ek Evaluation board
Freescale/NXP i.MX:
SolidRun Humminboard2 development board
Variscite DART-MX6 SoM and Carrier-board
Technologic TS-4600 and TS-7970 development board
Toradex Colibri iMX7D SoM board
v1.5 variant of Solidrun Cubox-i and Hummingboard
Freescale/NXP Layerscape:
Moxa UC-8410A Series industrial computer
Gemini:
D-Link DNS-313 NAS enclosure
OMAP:
LogicPD OMAP35xx SOM-LV devkit
LogicPD OMAP35xx Torpedo devkit
Renesas:
r8a77970 (V3M) Starter Kit board
r8a7795 (M3-W) Salvator-XS board
We finally managed to get the dtc warnings under control, with no more
build-time warnings for bad device tree files. This includes fixes for
the majority of platforms, including nomadik, samsung, lpc32xx, STi,
spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood,
renesas, hisilicon, and broadcom.
Files get rearranged on a few platforms, in particular the Marvell
Armada 7K/8K device tree files are changed in preparation for future
SoC support, based on more than two of the same chips in one package,
and some boards get renamed for oxnas for consistency.
Finally, many existing SoCs gain descriptions for additional on-chip
devices that we can now support with kernel drivers:
Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG)
Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi)
Aspeed clk controller support
Freescale LS1088A, LS1021A device support
Gemini Ethernet, PCI, TVE, panel
Keystone gpio, qspi, more uarts
Mediatek cpufreq, regulator, clock, reset
Marvell thermal, cpufreq, nand
Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu
Rockchip Mipi, GPU, display
Samsung Exynos5433 PMU, power domain, nfc
Spreadtrum: sc9860 clocks
Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJac0fiAAoJEGCrR//JCVInGUYP/ikTcjrmtQxmMINdsy88gmN3
lPk3jGoViyRzc9Y6hGUUXn1YNdK8+IqRkqLnhtVX3cOLS5pP2HwsvSgPmSSB3eQe
NOhXUNRQaTbeS/eBGZxJbxEKSowQHU+43M2kRNQOht7UQzS8NnBj/1RGaxcFyNSw
gIixWDZLgVTNCSloPaSrZmiwSa7rSM2q0ncBzzeafAZiTRNeOb6IUpnqu/n0Qnot
er6VoEyxp6ThFqRB7O8bCAIwgqlyB9xSGBPNR/JI0e0xXo3KVE/2AjHYDHVP/Ttx
X8vtb3m+RED7tX4oCmlrHb1SAAKpNi1Vzdg4PxmKCa7yb5xPog7OEr3rnpijzCL0
y8IJLlVSPyx31yB7mIIzCjrcISrT7tOXp0ha88/NgNsGXw5Ln0GVEqTkmSrz/JWo
z1G2tNwnstS64KK+chHOZfUto4Rzbrpmr9L1ziKIpSQtiNyOmiSu1c3EjHim7x4I
Mfiv6+8J71faUYuKVK1oaX0gi43oSZHu4NuniQy8dg/OIpgPpHHpG1qCyAzgC6Pa
r1Am2w33CXrJI78b4zG2pIDx0HghIjFUtjX9tijoFiMs1EZgbV6cJ2meep6Sy+XV
RBxHXPU8obdcuBfhgjEygwLI0HSe0R78B15qPP/SNxAFeAvE950xfPrGAoZg7qo/
o6B2iQSfsYQJbD8rUHaA
=qN1F
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree updates from Arnd Bergmann:
"We get a moderate number of new machines this time, and only one new
SoC variant (Actions S700):
Actions:
- S700 Soc and CubieBoard7 development board
- Allo.com Sparky Single-board-computer
Allwinner:
- Orange Pi R1 development board
- Libre Computer Board ALL-H3-CC H3 single-board computer
ASpeed ast2x00:
- Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500
- Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500
- Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400
AT91:
- Axentia Nattis/Natte digital signage
- sama5d2 PTC-ek Evaluation board
Freescale/NXP i.MX:
- SolidRun Humminboard2 development board
- Variscite DART-MX6 SoM and Carrier-board
- Technologic TS-4600 and TS-7970 development board
- Toradex Colibri iMX7D SoM board
- v1.5 variant of Solidrun Cubox-i and Hummingboard
Freescale/NXP Layerscape:
- Moxa UC-8410A Series industrial computer
Gemini:
- D-Link DNS-313 NAS enclosure
OMAP:
- LogicPD OMAP35xx SOM-LV devkit
- LogicPD OMAP35xx Torpedo devkit
Renesas:
- r8a77970 (V3M) Starter Kit board
- r8a7795 (M3-W) Salvator-XS board
We finally managed to get the dtc warnings under control, with no more
build-time warnings for bad device tree files. This includes fixes for
the majority of platforms, including nomadik, samsung, lpc32xx, STi,
spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood,
renesas, hisilicon, and broadcom.
Files get rearranged on a few platforms, in particular the Marvell
Armada 7K/8K device tree files are changed in preparation for future
SoC support, based on more than two of the same chips in one package,
and some boards get renamed for oxnas for consistency.
Finally, many existing SoCs gain descriptions for additional on-chip
devices that we can now support with kernel drivers:
- Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG)
- Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi)
- Aspeed clk controller support
- Freescale LS1088A, LS1021A device support
- Gemini Ethernet, PCI, TVE, panel
- Keystone gpio, qspi, more uarts
- Mediatek cpufreq, regulator, clock, reset
- Marvell thermal, cpufreq, nand
- Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu
- Rockchip Mipi, GPU, display
- Samsung Exynos5433 PMU, power domain, nfc
- Spreadtrum: sc9860 clocks
- Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ..."
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (690 commits)
arm64: dts: stratix10: fix SPI settings
ARM: dts: socfpga: add i2c reset signals
arm64: dts: stratix10: add USB ECC reset bit
arm64: dts: stratix10: enable USB on the devkit
ARM: dts: socfpga: disable over-current for Arria10 USB devkit
ARM: dts: Nokia N9: add support for up/down keys in the dts
ARM: dts: nomadik: add interrupt-parent for clcd
ARM: dts: Add ethernet to a bunch of platforms
ARM: dts: Add ethernet to the Gemini SoC
ARM: dts: rename oxnas dts files
ARM: dts: s5pv210: add interrupt-parent for ohci
ARM: lpc3250: fix uda1380 gpio numbers
ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property
ARM: dts: dra7: Reduce shut down temperature of non-cpu thermal zones
ARM: dts: n900: Add aliases for lcd and tvout displays
ARM: dts: Update ti-sysc data for existing users
ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance
arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string
arm: spear13xx: Fix spics gpio controller's warning
arm: spear13xx: Fix dmas cells
...
Core changes:
* Rework core functions to avoid duplicating generic checks in
NAND/OneNAND sub-layers
* Update the MAINTAINERS entry to reflect the fact that MTD
maintainers now use a single git tree
Driver changes:
* CFI: use macros instead of inline functions to limit stack
usage and make KASAN happy
NAND changes:
Core changes:
* Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks
* Introduce the ->exec_op() infrastructure
* Rework NAND buffers handling
* Fix ECC requirements for K9F4G08U0D
* Fix nand_do_read_oob() to return the number of bitflips
* Mark K9F1G08U0E as not supporting subpage writes
Driver changes:
* MTK: Rework the driver to support new IP versions
* OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and fix
DT support
* Marvell: Add a new driver to replace the pxa3xx one
SPI NOR changes:
Core changes:
* Add support to new ISSI and Cypress/Spansion memory parts.
* Fix support of Micron memories by checking error bits in the FSR.
* Fix update of block-protection bits by reading back the SR.
* Restore the internal state of the SPI flash memory when removing the
device.
Driver changes:
* Maintenance for Freescale, Intel and Metiatek drivers.
* Add support of the direct access mode for the Cadence QSPI controller.
-----BEGIN PGP SIGNATURE-----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=Mxo2
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-4.16' of git://git.infradead.org/linux-mtd
Pull MTD updates from Boris Brezillon:
"MTD core changes:
- Rework core functions to avoid duplicating generic checks in
NAND/OneNAND sub-layers
- Update the MAINTAINERS entry to reflect the fact that MTD
maintainers now use a single git tree
MTD driver changes:
- CFI: use macros instead of inline functions to limit stack usage
and make KASAN happy
NAND core changes:
- Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks
- Introduce the ->exec_op() infrastructure
- Rework NAND buffers handling
- Fix ECC requirements for K9F4G08U0D
- Fix nand_do_read_oob() to return the number of bitflips
- Mark K9F1G08U0E as not supporting subpage writes
NAND driver changes:
- MTK: Rework the driver to support new IP versions
- OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and
fix DT support
- Marvell: Add a new driver to replace the pxa3xx one
SPI NOR core changes:
- Add support to new ISSI and Cypress/Spansion memory parts.
- Fix support of Micron memories by checking error bits in the FSR.
- Fix update of block-protection bits by reading back the SR.
- Restore the internal state of the SPI flash memory when removing
the device.
SPI NOR driver changes:
- Maintenance for Freescale, Intel and Metiatek drivers.
- Add support of the direct access mode for the Cadence QSPI
controller"
* tag 'mtd/for-4.16' of git://git.infradead.org/linux-mtd: (93 commits)
mtd: nand: sunxi: Fix ECC strength choice
mtd: nand: gpmi: Fix subpage reads
mtd: nand: Fix build issues due to an anonymous union
mtd: nand: marvell: Fix missing memory allocation modifier
mtd: nand: marvell: remove redundant variable 'oob_len'
mtd: nand: marvell: fix spelling mistake: "suceed"-> "succeed"
mtd: onenand: omap2: Remove redundant dev_err call in omap2_onenand_probe()
mtd: Remove duplicate checks on mtd_oob_ops parameter
mtd: Fallback to ->_read/write_oob() when ->_read/write() is missing
mtd: mtdpart: Make ECC stat handling consistent
mtd: onenand: omap2: print resource using %pR format string
mtd: mtk-nor: modify functions' name more generally
mtd: onenand: samsung: remove incorrect __iomem annotation
MAINTAINERS: Add entry for Marvell NAND controller driver
ARM: OMAP2+: Remove gpmc-onenand
mtd: onenand: omap2: Configure driver from DT
mtd: onenand: omap2: Decouple DMA enabling from INT pin availability
mtd: onenand: omap2: Do not make delay for GPIO OMAP3 specific
mtd: onenand: omap2: Convert to use dmaengine for memcpy
mtd: onenand: omap2: Unify OMAP2 and OMAP3 DMA implementation
...
Older compilers choose not to inline _setup_clkctrl_provider(),
leading to a harmless warning:
WARNING: vmlinux.o(.text+0x27b34): Section mismatch in reference from the function _setup_clkctrl_provider() to the function .init.text:memblock_virt_alloc_try_nid()
The function _setup_clkctrl_provider() references
the function __init memblock_virt_alloc_try_nid().
This is often because _setup_clkctrl_provider lacks a __init
annotation or the annotation of memblock_virt_alloc_try_nid is wrong.
This annotates it as __init as well, which lets the linker
see that it is actually correct.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As OneNAND driver is now using devicetree gpmc-onenand and its
platform data is unused and can be removed.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
We now have gotten ti-sysc driver to the point where it can parse
interconnect target configuration from device tree instead of the
legacy platform data. This series updates the device tree binding
and adds parsing to the driver for quirks and capabilities.
-----BEGIN PGP SIGNATURE-----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=Hwvv
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.16/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers
TI sysc driver updates for v4.16 merge window
We now have gotten ti-sysc driver to the point where it can parse
interconnect target configuration from device tree instead of the
legacy platform data. This series updates the device tree binding
and adds parsing to the driver for quirks and capabilities.
* tag 'omap-for-v4.16/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Add parsing of module capabilities
bus: ti-sysc: Handle module quirks based dts configuration
bus: ti-sysc: Detect i2c interconnect target module based on register layout
bus: ti-sysc: Add register bits for interconnect target modules
bus: ti-sysc: Make omap_hwmod_sysc_fields into sysc_regbits platform data
ARM: OMAP2+: Move all omap_hwmod_sysc_fields to omap_hwmod_common_data.c
ARM: dts: Add generic ti,sysc compatible in addition to the custom ones
dt-bindings: ti-sysc: Update binding for timers and capabilities
Signed-off-by: Olof Johansson <olof@lixom.net>
We can now drop some more of legacy platform data for omap3 as
it's been booting in device tree only mode for quite a while now.
This clock related data is coming from device tree configured
clocks now.
The other changes add support for detecting new dra762 SoC variant.
-----BEGIN PGP SIGNATURE-----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=wejU
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.16/soc-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Second set of SoC changes for omaps for v4.16 merge window
We can now drop some more of legacy platform data for omap3 as
it's been booting in device tree only mode for quite a while now.
This clock related data is coming from device tree configured
clocks now.
The other changes add support for detecting new dra762 SoC variant.
* tag 'omap-for-v4.16/soc-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: dra762: Register package specific hwmod
ARM: OMAP2+: dra762: Add support for device package identification
ARM: OMAP2+: Drop unused legacy data for prcm_reg_id and module_bit
Signed-off-by: Olof Johansson <olof@lixom.net>
The optional clocks must be enabled before the main clock after the
transition to clkctrl controlled clocks is done. Otherwise the module
we attempt to enable might be stuck in transition.
Reported-by: Keerthy <j-keerthy@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This branch contains a series of dts changes from Tero Kristo to
start using clkctrl clocks.
Note that this branch is based on a merge of omap-for-v4.16/soc-signed
and an immutable commit from Tero Kristo fe7020e64f ("clk: ti: omap4:
clkctrl data fixes for opt-clocks") that is also in clk-next.
-----BEGIN PGP SIGNATURE-----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=uhHY
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.16/dt-clk-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Pull "Clock related dts changes for omaps for v4.16 merge window" from
Tony Lindgren:
This branch contains a series of dts changes from Tero Kristo to
start using clkctrl clocks.
Note that this branch is based on a merge of omap-for-v4.16/soc-signed
and an immutable commit from Tero Kristo fe7020e64f ("clk: ti: omap4:
clkctrl data fixes for opt-clocks") that is also in clk-next.
* tag 'omap-for-v4.16/dt-clk-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (57 commits)
ARM: dts: dm816x: add clkctrl nodes
ARM: dts: dm814x: add clkctrl nodes
ARM: dts: am43xx: add clkctrl nodes
ARM: dts: am33xx: add clkctrl nodes
ARM: dts: dra7: add clkctrl nodes
ARM: dts: omap5: add clkctrl nodes
ARM: dts: omap4: add clkctrl nodes
ARM: dts: dm816x: add bus functionality to base PRCM node
ARM: dts: am43xx: add bus functionality to base PRCM node
ARM: dts: am33xx: add bus functionality to base PRCM node
ARM: dts: dra7: add bus functionality to base PRCM nodes
ARM: dts: omap4: add bus functionality to base PRCM nodes
ARM: dts: omap5: add bus functionality to base PRCM nodes
ARM: dts: dm816x: add fck under timers1/2
ARM: dts: dm814x: add fck under timers1/2
ARM: dts: dra7: add fck under timer1
ARM: dts: am43xx: add fck under timers1/2
ARM: dts: am33xx: add fck under timers1/2
ARM: dts: omap4: add fck under timer1
ARM: dts: omap5: add fck under timer1
...
For most part this is a series from Tero Kristo to prepare things
for using clkctrl clocks with DTS data. The other changes are to
make few data structures const.
-----BEGIN PGP SIGNATURE-----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=QUSG
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.16/soc-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "SoC changes for omaps for v4.16 merge window" from Tony Lindgren:
For most part this is a series from Tero Kristo to prepare things
for using clkctrl clocks with DTS data. The other changes are to
make few data structures const.
* tag 'omap-for-v4.16/soc-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: CM: make cm_ll_data structures as const
ARM: OMAP2+: CM: make some pointers and function arguments as const
ARM: DM816x: hwmod_data: fix clockdomain name for sata hwmod
ARM: OMAP2+: hwmod: calculate physical register address on am33xx
ARM: AM33xx: CM: add support for getting physical address for a register
ARM: OMAP2+: clockdomain: remove the obsolete clkdm_xlate_address API
ARM: OMAP2+: hwmod: fix clkctrl address translation logic
ARM: OMAP4: CMINST: add support for translating clkctrl addresses
ARM: OMAP2+: CM: add support for getting phys address for a clkctrl register
We want to be able to configure hwmod sysc data from ti-sysc driver using
platform data callbacks. So let's make struct omap_hwmod_sysc_fields into
struct sysc_data and have it available for both ti-sysc driver and hwmod
code.
Note that we can make it use s8 instead of u8 as the hwmod code uses the
feature flags to check for this field. However, for ti-sysc we can use
-ENODEV to indicate a feature is not supported in the hardware and can
simplify the code that way.
And let's add also emufree_shift as the dts files will be describing the
hardware for the SYSCONFIG register capbilities mask.
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We want to be able to eventually allocate these dynamically with the
data for omap_hwmod_class_sysconfig coming from dts.
Note that omap_hwmod_sysc_type_smartreflex is the same as the older
omap36xx_sr_sysc_fields, so let's use the earlier omap36xx_sr_sysc_fields
instead.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Register dra762 abz package specific hwmod. Also move registering rtc hwmod
into respective SoC conditional statements instead of doing it separately.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
dra762 comes in two packages:
- ABZ: Pin compatible package with DRA742 and DDR@1333MHz
- ACD: High performance(OPP_PLUS) package with new IPs
Both the above packages uses the same IDCODE hence needs to
differentiate using package information in DIE_ID_2.
Add support for the same.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are now using clock drivers in driver/clk/ti for enabling and disabling
modules and these are all unused.
Let's also remove the related unused defines in cm-regbits-24xx.h and
cm-regbits-34xx.h.
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Make these const as they are only getting passed to the functions
cm_register and cm_unregister having the arguments as const.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Make the pointer cm_ll_data of type cm_ll_data as const as it does not
modify the fields of the structure it points too.
After this change, make the argument of cm_register function as const as
it is used to initialise cm_ll_data or used inside an if condition.
Make the pointer argument of cm_unregister function as const as it is only
used inside an if condition.
Add const to the function prototypes too.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
In configurations without CONFIG_OMAP3 but with secure RAM support,
we now run into a link failure:
arch/arm/mach-omap2/omap-secure.o: In function `omap3_save_secure_ram':
omap-secure.c:(.text+0x130): undefined reference to `save_secure_ram_context'
The omap3_save_secure_ram() function is only called from the OMAP34xx
power management code, so we can simply hide that function in the
appropriate #ifdef.
Fixes: d09220a887 ("ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context")
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
"default_sata_clkdm" does not exist, instead replace this with the
correct clockdomain name which is just "default_clkdm".
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Add support for the address translation logic for am33xx. Needed for
mapping hwmods towards their corresponding clkctrl providers and clocks.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
There are cases where clkctrl clock offsets do not match the corresponding
clockdomain, and this case the existing mapping functionality will fail.
Fix this by adding the whole address range for a clkctrl provider and
matching the actual clkctrl registers against these ranges.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Needed to map clkctrl clocks against hwmods. This patch also removes
the obsolete clkdm_xlate_address function which is no longer needed
for anything.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Add a new CM API for fetching the physical address of a hwmod clkctrl
register. This is needed to map omap hwmods against clkctrl clocks, the
existing support for clkdm address translation was not sufficient to
handle the mutant cases where the clockdomain offset is completely
off from the clkctrl ones.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
We need to set the error code if omap_device_alloc() fails.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Referring TRM Am335X series:
http://www.ti.com/lit/ug/spruh73p/spruh73p.pdf
The LastPowerStateEntered bitfield is present only for PM_CEFUSE
domain. This is not present in any of the other power domains. Hence
remove the generic am33xx_pwrdm_read_prev_pwrst hook which wrongly
reads the reserved bit fields for all the other power domains.
Reading the reserved bits leads to wrongly interpreting the low
power transitions for various power domains that do not have the
LastPowerStateEntered field. The pm debug counters values are wrong
currently as we are incrementing them based on the reserved bits.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
With the CMA changes from Joonsoo Kim <iamjoonsoo.kim@lge.com>, it
was noticed that n900 stopped booting. After investigating it turned
out that n900 save_secure_ram_context does some whacky virtual to
physical address translation for the SRAM data address.
As we now only have minimal parts of omap3 idle code copied to SRAM,
running save_secure_ram_context() in SRAM is not needed. It only gets
called on PM init. And it seems there's no need to ever call this from
SRAM idle code.
So let's just keep save_secure_ram_context() in DDR, and pass it the
physical address of the parameters. We can do everything else in
omap-secure.c like we already do for other secure code.
And since we don't have any documentation, I still have no clue what
the values for 0, 1 and 1 for the parameters might be. If somebody has
figured it out, please do send a patch to add some comments.
Debugged-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Most of the commits are for defconfig changes, to enable newly added
drivers or features that people have started using. For the changed
lines lines, we have mostly cleanups, the affected platforms are
OMAP, Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions.
The largest single change is the introduction of the TI "sysc" bus
driver, with the intention of cleaning up more legacy code.
Two new SoC platforms get added this time:
- Allwinner R40 is a modernized version of the A20 chip, now
with a Quad-Core ARM Cortex-A7. According to the manufacturer,
it is intended for "Smart Hardware"
- Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family
of chips meant for managed gigabit ethernet switches, based
around a Cortex-A9 CPU.
Finally, we gain SMP support for two platforms: Renesas R-Car E2
and Amlogic Meson8/8b, which were previously added but only supported
uniprocessor operation.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jlJ2
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"Most of the commits are for defconfig changes, to enable newly added
drivers or features that people have started using. For the changed
lines lines, we have mostly cleanups, the affected platforms are OMAP,
Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions.
The largest single change is the introduction of the TI "sysc" bus
driver, with the intention of cleaning up more legacy code.
Two new SoC platforms get added this time:
- Allwinner R40 is a modernized version of the A20 chip, now with a
Quad-Core ARM Cortex-A7. According to the manufacturer, it is
intended for "Smart Hardware"
- Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of
chips meant for managed gigabit ethernet switches, based around a
Cortex-A9 CPU.
Finally, we gain SMP support for two platforms: Renesas R-Car E2 and
Amlogic Meson8/8b, which were previously added but only supported
uniprocessor operation"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits)
ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module
ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER
arm64: defconfig: enable CONFIG_GPIO_UNIPHIER
ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b
ARM: meson: Add SMP bringup code for Meson8 and Meson8b
ARM: smp_scu: allow the platform code to read the SCU CPU status
ARM: smp_scu: add a helper for powering on a specific CPU
dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation
ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init()
ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init()
ARM: defconfig: select the right SX150X driver
arm64: defconfig: Enable QCOM_IOMMU
arm64: Add ThunderX drivers to defconfig
arm64: defconfig: Enable Tegra PCI controller
cpufreq: imx6q: Move speed grading check to cpufreq driver
arm64: defconfig: re-enable Qualcomm DB410c USB
ARM: configs: stm32: Add MDMA support in STM32 defconfig
ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1
bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove
bus: ti-sysc: mark PM functions as __maybe_unused
...
issues for v4.15 merge window sent by their human operatorrrrrs.
-----BEGIN PGP SIGNATURE-----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=vA9m
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.15/coccinelle-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "omap coccinelle warning fixes for v4.15 merge window" from Tony Lindgren:
Few coccinelle robot clean-up patches for careless human coding
issues for v4.15 merge window sent by their human operatorrrrrs.
* tag 'omap-for-v4.15/coccinelle-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init()
ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init()
ARM: omap1: add const and initconst to omap_lcd_config
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The patch d85a2d6143: "ARM: OMAP2+: Populate legacy resources for
dma and smartreflex" from Oct 10, 2017, leads to the following Smatch
complaint:
arch/arm/mach-omap2/omap_device.c:453 omap_device_copy_resources()
error: we previously assumed 'oh' could be null (see line 394)
Fixes: d85a2d6143: ("ARM: OMAP2+: Populate legacy resources for dma
and smartreflex")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
cm_split_idlest doesn't take the CM base offset into account right now,
causing it to read reserved registers which show idlestatus as active
always. This will cause the wait_module_ready functionality to be
effectively an expensive NOP, which will cause problems if the
module hasn't really activated during its execution. Fix by adding
the CM offset into the calculation so the wait_module_ready will
access correct register.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reported-by: Filip Matijevic <filip.matijevic.pz@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
MMC3 hwmod data is missing the module_offs definition. MMC3 belongs under
core, so add CORE_MOD for it.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The local variable "bus" will eventually be set to an appropriate pointer
a bit later. Thus omit the explicit initialisation at the beginning.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
dts files fixed up to contain the necessary data for basic resources, we
can drop the related platform data.
Note that this branch depends on the "omap-for-v4.15/fixes-dt-signed"
branch and the patches with dependencies are based on a merge with that
branch.
These patches first ensure things keep working for the legacy "ti,hwmods"
property when we start making it optional, then adds a minimal TI sysc
interconnect target device driver to handle the new generic "ti,sysc"
compatible property. And then we can finally drop the legacy platform
data for IRQ, DMA and IO resources as seen in the diffstats.
-----BEGIN PGP SIGNATURE-----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=UKzm
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.15/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "more soc changes for omaps for v4.15 merge window" from Tony Lindgren:
Drop omap legacy platform data for IRQ, DMA and IO resources. With the
dts files fixed up to contain the necessary data for basic resources, we
can drop the related platform data.
Note that this branch depends on the "omap-for-v4.15/fixes-dt-signed"
branch and the patches with dependencies are based on a merge with that
branch.
These patches first ensure things keep working for the legacy "ti,hwmods"
property when we start making it optional, then adds a minimal TI sysc
interconnect target device driver to handle the new generic "ti,sysc"
compatible property. And then we can finally drop the legacy platform
data for IRQ, DMA and IO resources as seen in the diffstats.
* tag 'omap-for-v4.15/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (25 commits)
bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove
bus: ti-sysc: mark PM functions as __maybe_unused
ARM: OMAP2+: omap_device: fix error return code in omap_device_copy_resources()
ARM: OMAP2+: Drop legacy struct omap_hwmod_addr_space
ARM: OMAP2+: Drop omap_hwmod_dma_info
ARM: OMAP2+: Drop omap_hwmod_irq_info
ARM: OMAP4: Remove legacy IRQ for PRM
ARM: OMAP3: Remove legacy IRQ for PRM
bus: ti-sysc: Add minimal TI sysc interconnect target driver
ARM: OMAP2+: Populate legacy resources for dma and smartreflex
ARM: OMAP2+: Parse module IO range from dts for legacy "ti,hwmods" support
ARM: dts: Configure SmartReflex only to idle the interconnect target module
ARM: dts: Add nodes for missing omap4 interconnect target modules
dt-bindings: bus: Minimal TI sysc interconnect target module binding
ARM: dts: Add missing hwmod related properties for dra7
ARM: dts: Add missing hwmod related nodes for am33xx
ARM: dts: Add missing dma hwmod property for omap5
ARM: dts: Add missing wdt3 node for omap4
ARM: dts: Add missing hsi node for omap4
ARM: dts: Add missing onewire node for omap4
...
fixes and clean-up in preparation for dropping more platform data later
on:
- Fix am33xx/am437x MMC address space offsets
- Fix overwriting clkctrl and modulemode values when dts data is
used
- Drop unused platform init code for omap_init_hdq
- Drop unused struct omap_hwmod_mux_info
- Remove duplicate define for dra722 es1.0 silicon revision
- Add support for dra71x es2.1
- Make omap_dma_dev_info __initdata
- A series of fixes for Coccinelle found issues
-----BEGIN PGP SIGNATURE-----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=oSR0
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.15/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "OMAP soc changes for omaps for v4.15 merge window" from Tony Lindgren:
SoC changes for omaps for v4.15 merge window that are mostly non-urgent
fixes and clean-up in preparation for dropping more platform data later
on:
- Fix am33xx/am437x MMC address space offsets
- Fix overwriting clkctrl and modulemode values when dts data is
used
- Drop unused platform init code for omap_init_hdq
- Drop unused struct omap_hwmod_mux_info
- Remove duplicate define for dra722 es1.0 silicon revision
- Add support for dra71x es2.1
- Make omap_dma_dev_info __initdata
- A series of fixes for Coccinelle found issues
* tag 'omap-for-v4.15/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP: Fix typos in two comment lines in _omap_dm_timer_request()
ARM: OMAP: Use kcalloc() in omap_system_dma_probe()
ARM: OMAP: Improve a size determination in two functions
ARM: OMAP: Delete an error message for a failed memory allocation in two functions
ARM: OMAP2+: make omap_dma_dev_info __initdata
ARM: DRA722: Add support for DRA71x Silicon Rev 2.1
ARM: DRA722: remove redundant definition of 1.0 device
ARM: OMAP2+: Drop unused omap_hwmod_mux_info
ARM: OMAP2+: Drop unused omap_init_hdq
ARM: OMAP2+: Fix overwriting of clkctrl and modulemode values
ARM: OMAP2+: Fix MMC address space mismatch for am33xx and am43xx
Fix to return error code -EINVAL from the irq_of_parse_and_map() error
handling case instead of 0, as done elsewhere in this function.
Fixes: d85a2d6143 ("ARM: OMAP2+: Populate legacy resources for dma
and smartreflex")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
With all of mach-omap2 booting now in device tree only mode,
we can get the module IO range from device tree and just drop
the legacy hwmod struct omap_hwmod_addr_space.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We have all of mach-omap2 booting in device tree only
mode now, and this data is populated from device tree.
Note that once we have removed support for the omap legacy
DMA, we can also drop struct omap_dma_dev_attr.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
With the previous patches removing the need for legacy IRQs
now that all of mach-omap2 is booting in device tree only mode,
we can drop struct omap_hwmod_irq_info.
Note that we can now also finally drop omap4_xlate_irq.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We have the PRM IRQ mapped in device tree and this legacy code
is no longer needed.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We have this coming from device tree and legacy booting is
no longer needed.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can handle the sysc interconnect target module in a generic way
for many TI SoCs. Initially let's just enable runtime PM with
autosuspend, and probe the children. This can already be used for
idling interconnect target modules that don't have any device driver
available for the child devices.
For now, the "ti,hwmods" custom binding is still required. That will
be eventually deprecated in later patches. And more features will be
added, such as parsing for sysc capabilities so we can continue
removing the legacy platform data.
Cc: Benoît Cousson <bcousson@baylibre.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Matthijs van Duin <matthijsvanduin@gmail.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can populate the legacy resources needed by dma and smartreflex
from device tree in omap_device_build().
There should be no need to do this for other devices, and eventually
these two remaining users will be gone too. The legacy dma will be
dropped when the remaining users have been converted to use the
dmaengine driver, and smartreflex can now become just a regular
device driver with a few pdata callbacks.
This is needed in order to remove remaining device dma, irq and io
resources from the interconnect code.
And while at it, let's simplify things by removing otherwise
unused omap_device_build_ss() as we will never call it for more
than one hwmod.
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
When removing legacy platform data for IO ranges for the hwmod
interconnect code, we still need to support the "ti,hwmods"
property.
And as we're going to use a generic sysc device driver to handle the
interconnect target instances, we can parse the information needed
for legacy "ti,hwmods" IO range from the dts. It's always the first
range the interconnect target module provides.
Note that we want to parse the range instead of the first child
device IO regs as the child device may not always be defined.
The child IP device node may not exist in cases where there is no
driver binding for the device, or when the child IP block may not
even be functional for some SoC revisions. But the IO range of the
interconnect target module is always known.
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Make this __initdata as it is only modified only during the initialisation
phase in the function omap2_system_dma_init_dev and after this it is not
referenced anywhere in the kernel.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
DRA71x processors are reduced pin and software compatible
derivative of DRA72 processors.
Silicon Rev 2.1 is a minor variant of DRA71x Rev 2.0 with
various fixes including the following:
- NAND boot fixes
- ROM update for secure boot crypto enhancement
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This is no longer used as we boot in device tree
only mode.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are currently overwiting the hwmod clkctrl registers if we
configure a clock ctrl clock from device tree.
While this does not expose any bugs except for kernel coders
when debugging things, it should be fixed for correctness.
It is now impossible to use the hwmod data for checking the
clkctrl register values after booting for debugging or
generating dts data from hwmod data.
Let's fix the issue by adding a helper to detect if clkctrl
clock is configured.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The address space currently set up for the interconnect data
is different compared to the dts data. We have hwmod data with
offset 0x100 to account for the revision, sysc and syss
register offsets. Let's fix the issue by correcting the MMC
register offsets in hwmod data and removing the unnecessary
duplicate IO range data that we get from device tree anyways.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
With 4.13 kernel I get this boot message:
[ 1.051727] ------------[ cut here ]------------
[ 1.051818] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x54/0x74
[ 1.051849] sysfs: cannot create duplicate filename '/devices/platform/omap_hsmmc.2'
[ 1.051879] Modules linked in:
[ 1.051971] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-letux+ #1360
[ 1.052001] Hardware name: Generic OMAP3 (Flattened Device Tree)
[ 1.052062] [<c010f690>] (unwind_backtrace) from [<c010bba8>] (show_stack+0x10/0x14)
[ 1.052124] [<c010bba8>] (show_stack) from [<c075dc88>] (dump_stack+0x98/0xd0)
[ 1.052185] [<c075dc88>] (dump_stack) from [<c012f398>] (__warn+0xd0/0x100)
[ 1.052215] [<c012f398>] (__warn) from [<c012f3fc>] (warn_slowpath_fmt+0x34/0x44)
[ 1.052276] [<c012f3fc>] (warn_slowpath_fmt) from [<c02ebcb4>] (sysfs_warn_dup+0x54/0x74)
[ 1.052337] [<c02ebcb4>] (sysfs_warn_dup) from [<c02ebd90>] (sysfs_create_dir_ns+0x74/0x84)
[ 1.052398] [<c02ebd90>] (sysfs_create_dir_ns) from [<c0761b8c>] (kobject_add_internal+0xd0/0x294)
[ 1.052429] [<c0761b8c>] (kobject_add_internal) from [<c0761f00>] (kobject_add+0x6c/0x8c)
[ 1.052490] [<c0761f00>] (kobject_add) from [<c04e831c>] (device_add+0xe4/0x510)
[ 1.052551] [<c04e831c>] (device_add) from [<c04ec6e4>] (platform_device_add+0x130/0x1c0)
[ 1.052612] [<c04ec6e4>] (platform_device_add) from [<c01281c0>] (omap_hsmmc_late_init+0x3c/0x60)
[ 1.052673] [<c01281c0>] (omap_hsmmc_late_init) from [<c0b0fa44>] (omap3_pandora_legacy_init+0x24/0xb4)
[ 1.052734] [<c0b0fa44>] (omap3_pandora_legacy_init) from [<c0128178>] (pdata_quirks_check+0x30/0x3c)
[ 1.052795] [<c0128178>] (pdata_quirks_check) from [<c0b0f950>] (omap_generic_init+0xc/0x18)
[ 1.052856] [<c0b0f950>] (omap_generic_init) from [<c0b03480>] (customize_machine+0x1c/0x28)
[ 1.052917] [<c0b03480>] (customize_machine) from [<c0101938>] (do_one_initcall+0xa8/0x150)
[ 1.052947] [<c0101938>] (do_one_initcall) from [<c0b00d70>] (kernel_init_freeable+0x110/0x1d4)
[ 1.053009] [<c0b00d70>] (kernel_init_freeable) from [<c076f198>] (kernel_init+0x8/0x10c)
[ 1.053070] [<c076f198>] (kernel_init) from [<c01070f0>] (ret_from_fork+0x14/0x24)
[ 1.055023] ---[ end trace 44e490b09ac4ab88 ]---
This can be traced down to the calls of
omap_hsmmc_init(pandora_mmc3);
omap_hsmmc_late_init(pandora_mmc3);
in omap3_pandora_legacy_init().
It turns out that both funcions disagree how to decide if the other one was alredy called.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
gpio1 soft reset fails in the kexec path as the optional clock
is not enabled hence enable the HWMOD_CONTROL_OPT_CLKS_IN_RESET
flag for gpio1 hwmod.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Pull ARM updates from Russell King:
"Low priority fixes and updates for ARM:
- add some missing includes
- efficiency improvements in system call entry code when tracing is
enabled
- ensure ARMv6+ is always built as EABI
- export save_stack_trace_tsk()
- fix fatal signal handling during mm fault
- build translation table base address register from scratch
- appropriately align the .data section to a word boundary where we
rely on that data being word aligned"
* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8691/1: Export save_stack_trace_tsk()
ARM: 8692/1: mm: abort uaccess retries upon fatal signal
ARM: 8690/1: lpae: build TTB control register value from scratch in v7_ttb_setup
ARM: align .data section
ARM: always enable AEABI for ARMv6+
ARM: avoid saving and restoring registers unnecessarily
ARM: move PC value into r9
ARM: obtain thread info structure later
ARM: use aliases for registers in entry-common
ARM: 8689/1: scu: add missing errno include
ARM: 8688/1: pm: add missing types include
This branch contains platform updates for 32- and 64-bit ARM,
including defconfig updates to enable new options, drivers and
platforms. There are also a few fixes and cleanups for some existing vendors.
Some of the things worth highlighting here are:
- Enabling new crypt drivers on arm64 defconfig
- QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig
- Debug support enabled for Renesas r8a7743
- Various config updates for Renesas platforms (sound, USB, other drivers)
- Platform support (including SMP) for TI dra762
- OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale DMA code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=g8cF
-----END PGP SIGNATURE-----
Merge tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch
contains platform updates for 32- and 64-bit ARM, including defconfig
updates to enable new options, drivers and platforms. There are also a
few fixes and cleanups for some existing vendors.
Some of the things worth highlighting here are:
- Enabling new crypt drivers on arm64 defconfig
- QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig
- Debug support enabled for Renesas r8a7743
- Various config updates for Renesas platforms (sound, USB, other
drivers)
- Platform support (including SMP) for TI dra762
- OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale
DMA code"
* tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits)
ARM: multi_v7_defconfig: make eSDHC driver built-in
arm64: defconfig: enable rockchip graphics
MAINTAINERS: Update Cavium ThunderX2 entry
ARM: config: aspeed: Add I2C, VUART, LPC Snoop
ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G
ARM: s3c24xx: Fix NAND ECC mode for mini2440 board
ARM: davinci_all_defconfig: enable tinydrm and ST7586
arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl
ARM: defconfig: tegra: Enable ChipIdea UDC driver
ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig
ARM: tegra: Add Tegra I2S interfaces to defconfig
ARM: tegra: Update default configuration for v4.13-rc1
MAINTAINERS: update ARM/ZTE entry
soc: versatile: remove unnecessary static in realview_soc_probe()
ARM: Convert to using %pOF instead of full_name
ARM: hisi: Fix typo in comment
ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add recently added crypto drivers as modules
arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG
...
- RK805 Power Management IC (PMIC)
- ROHM BD9571MWV-M MFD Power Management IC (PMIC)
- Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs
- New Device Support
- Add support for HiSilicon Hi6421v530 to hi6421-pmic-core
- Add support for X-Powers AXP806 to axp20x
- Add support for X-Powers AXP813 to axp20x
- Add support for Intel Sunrise Point LPSS to intel-lpss-pci
- New Functionality
- Amend API to provide register layout; atmel-smc
- Fix-ups
- DT re-work; omap, nokia
- Header file location change {I2C => MFD}; dm355evm_msp, tps65010
- Fix chip ID formatting issue(s); rk808
- Optionally register touchscreen devices; da9052-core
- Documentation improvements; twl-core
- Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi
- Drop unnecessary static declaration; max8925-i2c
- Kconfig changes (missing deps and remove module support)
- Slim down oversized licence statement; hi6421-pmic-core
- Use managed resources (devm_*); lp87565
- Supply proper error checking/handling; t7l66xb
- Bug Fixes
- Fix counter duplication issue; da9052-core
- Fix potential NULL deference issue; max8998
- Leave SPI-NOR write-protection bit alone; lpc_ich
- Ensure device is put into reset during suspend; intel-lpss
- Correct register offset variable size; omap-usb-tll
-----BEGIN PGP SIGNATURE-----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=TKIm
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers
- RK805 Power Management IC (PMIC)
- ROHM BD9571MWV-M MFD Power Management IC (PMIC)
- Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs
New Device Support:
- Add support for HiSilicon Hi6421v530 to hi6421-pmic-core
- Add support for X-Powers AXP806 to axp20x
- Add support for X-Powers AXP813 to axp20x
- Add support for Intel Sunrise Point LPSS to intel-lpss-pci
New Functionality:
- Amend API to provide register layout; atmel-smc
Fix-ups:
- DT re-work; omap, nokia
- Header file location change {I2C => MFD}; dm355evm_msp, tps65010
- Fix chip ID formatting issue(s); rk808
- Optionally register touchscreen devices; da9052-core
- Documentation improvements; twl-core
- Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi
- Drop unnecessary static declaration; max8925-i2c
- Kconfig changes (missing deps and remove module support)
- Slim down oversized licence statement; hi6421-pmic-core
- Use managed resources (devm_*); lp87565
- Supply proper error checking/handling; t7l66xb
Bug Fixes:
- Fix counter duplication issue; da9052-core
- Fix potential NULL deference issue; max8998
- Leave SPI-NOR write-protection bit alone; lpc_ich
- Ensure device is put into reset during suspend; intel-lpss
- Correct register offset variable size; omap-usb-tll"
* tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits)
mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants
mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT
dt-bindings: mfd: Add bindings for ZII RAVE devices
mfd: omap-usb-tll: Fix register offsets
mfd: da9052: Constify spi_device_id
mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend
mfd: da9055: Constify i2c_device_id
mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices
mfd: t7l66xb: Handle return value of clk_prepare_enable
mfd: Add ROHM BD9571MWV-M PMIC DT bindings
mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool
mfd: lp87565: Convert to use devm_mfd_add_devices()
mfd: Add support for TPS68470 device
mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell
mfd: syscon: atmel-smc: Add helper to retrieve register layout
mfd: axp20x: Use correct platform device ID for many PEK
dt-bindings: mfd: axp20x: Introduce bindings for AXP813
mfd: axp20x: Add support for AXP813 PMIC
dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips
mfd: Add ROHM BD9571MWV-M MFD PMIC driver
...
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The function that was added doesn't actually build:
arch/arm/mach-omap2/display.c: In function 'omapdss_init_fbdev':
arch/arm/mach-omap2/display.c:184:2: error: 'r' undeclared (first use in this function)
This adds a declaration for 'r' to fix it.
Fixes: 5ce783025c ("ARM: OMAP2+: Don't register omapdss device for omapdrm")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
can wait for the merge window as we have not seemed to hit
any of these so far:
- Fix error handling in omap_ocp2scp_probe affecting runtime
PM error path
- Drop broken RPM status update for omap_device
- Two fixes for of_irq_get() usage that can return 0
-----BEGIN PGP SIGNATURE-----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=+wbL
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.14/fixes-not-urgent-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup
Pull "non-urgent fixes for omaps for v4.14" from Tony Lindgren:
Non-urgent fixes for omaps for v4.14 merge window. These all
can wait for the merge window as we have not seemed to hit
any of these so far:
- Fix error handling in omap_ocp2scp_probe affecting runtime
PM error path
- Drop broken RPM status update for omap_device
- Two fixes for of_irq_get() usage that can return 0
* tag 'omap-for-v4.14/fixes-not-urgent-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4+: PRM: fix of_irq_get() result checks
ARM: OMAP3+: PRM: fix of_irq_get() result check
ARM: OMAP2+: omap_device: drop broken RPM status update from suspend_noirq
bus: omap-ocp2scp: Fix error handling in omap_ocp2scp_probe
support for new dra762 SoC. The other changes are are for legacy
DMA code removal, and MMC quirk and iodelay config for dra7.
-----BEGIN PGP SIGNATURE-----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=FBGl
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.14/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "soc changes for omaps for v4.14" from Tony Lindgren:
SoC updates for omaps for v4.14. Most of the chages are to add
support for new dra762 SoC. The other changes are are for legacy
DMA code removal, and MMC quirk and iodelay config for dra7.
* tag 'omap-for-v4.14/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP: dra7: powerdomain data: Register SoC specific powerdomains
ARM: dra762: Enable SMP for dra762
ARM: dra7: hwmod: Register dra76x specific hwmod
ARM: dra762: Add support for device identification
ARM: OMAP2+: board-generic: add support for dra762 family
ARM: OMAP2+: Select PINCTRL_TI_IODELAY for SOC_DRA7XX
ARM: OMAP2+: Add pdata-quirks for MMC/SD on DRA74x EVM
ARM: OMAP2+: Remove unused legacy code for DMA
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The omapdrm driver doesn't need the omapdss device anymore. Although it
can't be removed completely as the fbdev driver still requires it, we
can condition its registration to the usage of the omapfb driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdrm platform device is unused, as a replacement is now
registered in the omapdss driver. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
of_irq_get() may return 0 as well as a nagative error number on failure,
(and never on success), however omap44xx_prm_late_init() regards 0 as a
valid IRQ -- fix this.
Fixes: a8f83aefcd ("ARM: OMAP4+: PRM: register interrupt information from DT")
Fixes: c5b3955828 ("ARM: OMAP4: Fix legacy code clean-up regression")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
of_irq_get() may return 0 as well as a nagative error number on failure
(and never on success), however omap3xxx_prm_late_init() regards 0 as a
valid IRQ -- fix this.
Fixes: 1e037794f7 ("ARM: OMAP3+: PRM: register interrupt information from DT")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
SoC device attributes are registered with a call to
soc_device_register() from the machine .init_late() operation, which is
called from the late initcall, after all drivers built-in drivers have
been probed. This results in the impossibility for drivers to use SoC
device matching in their probe function.
The omap_soc_device_init() function is safe to call from the machine
.init() operation, as all data it depends on is initialized from the
.init_early() operation. Move SoC device attribute registration to
machine .init() like on all other ARM platforms.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Custom efuse powerdomain is always on in dra72 ES2.0
and dra76 SoCs. So register it as aon for these SoCs.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
smp specific routines are called based on soc_is_*() api in omap-smc.c.
Add soc_is_dra76x() to the condition so that smp specific routines are
called for dra76 SoC.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Certain IPs are available on dra76 which are not present
either in dra74 or dra72. So add provision to register dra76
specific IPs separately.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Robert Jarzmik reports that his PXA25x system fails to boot with 4.12,
failing at __flush_whole_cache in arch/arm/mm/proc-xscale.S:215:
0xc0019e20 <+0>: ldr r1, [pc, #788]
0xc0019e24 <+4>: ldr r0, [r1] <== here
with r1 containing 0xc06f82cd, which is the address of "clean_addr".
Examination of the System.map shows:
c06f22c8 D user_pmd_table
c06f22cc d __warned.19178
c06f22cd d clean_addr
indicating that a .data.unlikely section has appeared just before the
.data section from proc-xscale.S. According to objdump -h, it appears
that our assembly files default their .data alignment to 2**0, which
is bad news if the preceding .data section size is not power-of-2
aligned at link time.
Add the appropriate .align directives to all assembly files in arch/arm
that are missing them where we require an appropriate alignment.
Reported-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
PINCTRL_TI_IODELAY should be enabled so that "pinctrl_dev" can be created
for pinctrl entries populated with iodelay values in device tree data.
Select PINCTRL_TI_IODELAY for SOC_DRA7XX here.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
DRA74x EVM Rev H EVM comes with revision 2.0 silicon.
However, earlier versions of EVM can come with either
revision 1.1 or revision 1.0 of silicon.
The device-tree file is written to support rev 2.0 of
silicon. pdata quirks are used to then override the
settings needed for PG 1.1 silicon.
PG 1.1 silicon has limitations w.r.t frequencies at
which MMC1/2/3 can operate as well as different IOdelay
numbers.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.
Let's leave the dummy omap2_system_dma_init_dev() check
in place for now to avoid a pointless merge conflict with
tusb6010 dmaengine conversion as pointed out by Peter
Ujfalusi <peter.ujfalusi@ti.com>.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Since commit a8636c8964 ("PM / Runtime: Don't allow to suspend a
device with an active child"), which went into 4.10, it is no longer
permitted to set RPM_SUSPENDED state for a device with active children
(unless power.ignore_children is set).
This specifically means that the attempts to do just that from the omap
pm-domain suspend_noirq callback have since been failing whenever a
child is active, for example:
am335x-usb-childs 47400000.usb: runtime PM trying to suspend
device but active child
Silence this warning by dropping the broken pm_runtime_set_suspended()
call from the omap suspend_noirq callback along with the redundant
pm_runtime_set_active() in resume_noirq.
This effectively reverts commit 3522bf7bfa ("ARM: OMAP2+: omap_device:
maintain sane runtime pm status around suspend/resume"), which started
updating the RPM state after the runtime_suspend callback (!) for active
omap devices had been called during system suspend. The rationale was
that a later pm_runtime_get_sync() would then fail (even after runtime
pm had been disabled) and that this in turn would avoid any external
aborts when accessing registers with clocks disabled. (See also commit
6f3c77b040 ("PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE,
even when disabled, v2").
But during the suspend_noirq phase all children would already have been
suspended and their drivers would specifically not attempt any further
register accesses. And if this was all just a workaround for random
device drivers doing cross-tree calls during system suspend, those
drivers should be fixed and updated to explicitly model such
dependencies using device-links instead (and either way, any such calls
have been causing crashes since 4.10).
Fixes: 3522bf7bfa ("ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume")
Fixes: a8636c8964 ("PM / Runtime: Don't allow to suspend a device with an active child")
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This comes a bit later than I planned, and as a consequence is a larger
than it should be.
Most of the changes are devicetree fixes, across lots of platforms:
Renesas, Samsung Exynos, Marvell EBU, TI OMAP, Rockchips, Amlogic Meson,
Sigma Desings Tango, Allwinner SUNxi and TI Davinci.
Also across many platforms, I applied an older series of simple randconfig
build fixes. This includes making the CONFIG_MTD_XIP option compile again,
which had been broken for many years and probably has not been missed, but
it felt wrong to just remove it completely.
The only other changes are:
- We enable HWSPINLOCK in defconfig to get some Qualcomm boards
to work out of the box.
- A few regression fixes for Texas Instruments OMAP2+.
- A boot regression fix for the Renesas regulator quirk.
- A suspend/resume fix for Uniphier SoCs, fixing the resume of the
system bus.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=a2dO
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"This comes a bit later than I planned, and as a consequence is a
larger than it should be.
Most of the changes are devicetree fixes, across lots of platforms:
Renesas, Samsung Exynos, Marvell EBU, TI OMAP, Rockchips, Amlogic
Meson, Sigma Desings Tango, Allwinner SUNxi and TI Davinci.
Also across many platforms, I applied an older series of simple
randconfig build fixes. This includes making the CONFIG_MTD_XIP option
compile again, which had been broken for many years and probably has
not been missed, but it felt wrong to just remove it completely.
The only other changes are:
- We enable HWSPINLOCK in defconfig to get some Qualcomm boards to
work out of the box.
- A few regression fixes for Texas Instruments OMAP2+.
- A boot regression fix for the Renesas regulator quirk.
- A suspend/resume fix for Uniphier SoCs, fixing the resume of the
system bus"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
ARM: dts: tango4: Request RGMII RX and TX clock delays
bus: uniphier-system-bus: set up registers when resuming
ARM64: dts: marvell: armada-37xx: Fix the number of GPIO on south bridge
ARM: shmobile: rcar-gen2: Fix deadlock in regulator quirk
arm64: defconfig: enable missing HWSPINLOCK
ARM: pxa: select both FB and FB_W100 for eseries
ARM: ixp4xx: fix ioport_unmap definition
ARM: ep93xx: use ARM_PATCH_PHYS_VIRT correctly
ARM: mmp: mark usb_dma_mask as __maybe_unused
ARM: omap2: mark unused functions as __maybe_unused
ARM: omap1: avoid unused variable warning
ARM: sirf: mark sirfsoc_init_late as __maybe_unused
ARM: ixp4xx: use normal prototype for {read,write}s{b,w,l}
ARM: omap1/ams-delta: warn about failed regulator enable
ARM: rpc: rename RAM_SIZE macro
ARM: w90x900: normalize clk API
ARM: ep93xx: normalize clk API
ARM: dts: sun8i: a83t: Switch to CCU device tree binding macros
arm64: allwinner: sun50i-a64: Correct emac register size
ARM: dts: sunxi: h3/h5: Correct emac register size
...
The omap_generic_init() and omap_hwmod_init_postsetup() functions are
used in the initialization for all OMAP2+ SoC types, but in the
extreme case that those are all disabled, we get a warning about
unused code:
arch/arm/mach-omap2/io.c:412:123: error: 'omap_hwmod_init_postsetup' defined but not used [-Werror=unused-function]
arch/arm/mach-omap2/board-generic.c:30:123: error: 'omap_generic_init' defined but not used [-Werror=unused-function]
This annotates both as __maybe_unused to shut up that warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
- Fix disable_irq related shared IRQ warnings for omap3 PRM
- Fix omap4 legacy code regression that accidentally removed code that
we still need for PRM interrupts
- Fix dm8168-evm NAND pins and MMC write protect pin direction
- Fix dra71-evm mdio impedance values
-----BEGIN PGP SIGNATURE-----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=ibLi
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.13/fixes-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Pull "Few fixes for omaps for issues found recently" from Tony Lindgren:
- Fix disable_irq related shared IRQ warnings for omap3 PRM
- Fix omap4 legacy code regression that accidentally removed code that
we still need for PRM interrupts
- Fix dm8168-evm NAND pins and MMC write protect pin direction
- Fix dra71-evm mdio impedance values
* tag 'omap-for-v4.13/fixes-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra71-evm: mdio: Fix impedance values
ARM: dts: dm816x: Correct the state of the write protect pin
ARM: dts: dm816x: Correct NAND support nodes
ARM: OMAP4: Fix legacy code clean-up regression
ARM: OMAP2+: Fix omap3 prm shared irq
Most platforms using OMAP hsmmc driver have switched to device tree
for passing platform data to omap_hsmmc.c driver.
The hsmmc.c file in mach-omap2 exists only to support pandora board
which uses wl1251 driver in legacy platform data mode.
Hence, remove the dead code not used by the pandora board.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
for a few platforms:
- Andres Färber adds initial support for the Actions Semi S500 (a.k.a.
'owl') platform, a close relative of the S900 platform he adds for arm64.
- in mach-omap2, we remove more legacy code
- Rockchips gains support for the RV1108 SoC designed for camera
applications.
- For Atmel, we gain support for MMU-less SoCs (SAME70/V71/S70/V70)
- Minor updates for other platforms, including davinci, s3c64xx,
prima2, stm32, broadcom nsp, amlogic, pxa, imx and renesas
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8F3w
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
for a few platforms:
- Andres Färber adds initial support for the Actions Semi S500 (aka
'owl') platform, a close relative of the S900 platform he adds for
arm64.
- in mach-omap2, we remove more legacy code
- Rockchips gains support for the RV1108 SoC designed for camera
applications.
- For Atmel, we gain support for MMU-less SoCs (SAME70/V71/S70/V70)
- Minor updates for other platforms, including davinci, s3c64xx,
prima2, stm32, broadcom nsp, amlogic, pxa, imx and renesas"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (74 commits)
ARM: owl: smp: Drop bogus holding pen
ARM: owl: Drop custom machine
ARM: owl: smp: Implement SPS power-gating for CPU2 and CPU3
soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating
soc: actions: Add Owl SPS
dt-bindings: power: Add Owl SPS power domains
MAINTAINERS: Update Actions Semi section with SPS
ARM: owl: Implement CPU enable-method for S500
MAINTAINERS: Add Actions Semi Owl section
ARM: Prepare Actions Semi S500
ARM: socfpga: Increase max number of GPIOs
ARM: stm32: Introduce MACH_STM32F469 flag
ARM: prima2: remove redundant select CPU_V7
ARM: davinci: fix const warnings
ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ALWAYS_ON
ARM: OMAP4: hwmod_data: add SHAM crypto accelerator
ARM: OMAP4: hwmod data: add des
ARM: OMAP4: hwmod data: add aes2
ARM: OMAP4: hwmod data: add aes1
ARM: pxa: Delete an error message for a failed memory allocation in pxa3xx_u2d_probe()
...
Here is the big patchset of USB and PHY driver updates for 4.13-rc1.
On the PHY side, they decided to move files around to "make things
easier" in their tree. Hopefully that wasn't a mistake, but in
linux-next testing, we haven't had any reported problems.
There's the usual set of gadget and xhci and musb updates in here as
well, along with a number of smaller updates for a raft of different USB
drivers. Full details in the shortlog, nothing really major.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWVpavQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymJrgCgp8Pso8bs+bnIknUSQFSguWd3wM0AnA8X3NHf
lrdCuqw+2oxGOQrecacz
=5L4Q
-----END PGP SIGNATURE-----
Merge tag 'usb-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY updates from Greg KH:
"Here is the big patchset of USB and PHY driver updates for 4.13-rc1.
On the PHY side, they decided to move files around to "make things
easier" in their tree. Hopefully that wasn't a mistake, but in
linux-next testing, we haven't had any reported problems.
There's the usual set of gadget and xhci and musb updates in here as
well, along with a number of smaller updates for a raft of different
USB drivers. Full details in the shortlog, nothing really major.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (173 commits)
Add USB quirk for HVR-950q to avoid intermittent device resets
USB hub_probe: rework ugly goto-into-compound-statement
usb: host: ohci-pxa27x: Handle return value of clk_prepare_enable
USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
usbip: Fix uninitialized variable bug in vhci
usb: core: read USB ports from DT in the usbport LED trigger driver
dt-bindings: leds: document new trigger-sources property
usb: typec: ucsi: Add ACPI driver
usb: typec: Add support for UCSI interface
usb: musb: compress return logic into one line
USB: serial: propagate late probe errors
USB: serial: refactor port endpoint setup
usb: musb: tusb6010_omap: Convert to DMAengine API
ARM: OMAP2+: DMA: Add slave map entries for 24xx external request lines
usb: musb: tusb6010: Handle DMA TX completion in DMA callback as well
usb: musb: tusb6010_omap: Allocate DMA channels upfront
usb: musb: tusb6010_omap: Create new struct for DMA data/parameters
usb: musb: tusb6010_omap: Use one musb_ep_select call in tusb_omap_dma_program
usb: musb: tusb6010: Add MUSB_G_NO_SKB_RESERVE to quirks
usb: musb: Add quirk to avoid skb reserve in gadget mode
...
Commit 2a26d31b1b ("ARM: OMAP2+: Remove unused legacy code for PRM")
removed PRM platform init code that I thought is unused. Turns out omap4
still needs this code, so let's do a partial revert to add it back.
I probably missed this earlier as the comments used to say
"OMAP4+ is DT only now" for !of_have_populated_dt() to exit early and
missed the negative test. Let's not add those lines back as they are
confusing and no longer needed as we only boot in device tree mode.
Without things things can mysterious fail for i2c, for example LM75
I2C temperature sensor can stop working as the PRM interrupts won't work.
Fixes: 2a26d31b1b ("ARM: OMAP2+: Remove unused legacy code for PRM")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Shared interrupts with IRQ_NOAUTOEN got a warning added with commit
04c848d398 ("genirq: Warn when IRQ_NOAUTOEN is used with shared
interrupts").
Let's just drop the IRQ_NOAUTOEN use for omap3 PRM shared interrupt as
it does not seem to cause any other issues based on my testing. We have
moved a lot of the code to initialize later, and whatever problems the
legacy booting had seem to be gone now with pinctrl driver and device
tree based booting.
Otherwise we will get:
WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1348 __setup_irq+0x5d0/0x64c
[<c01b0260>] (__setup_irq) from [<c01b0480>]
(request_threaded_irq+0xdc/0x188)
[<c01b0480>] (request_threaded_irq) from [<c051c780>]
(pcs_probe+0x6ec/0x8a4)
[<c051c780>] (pcs_probe) from [<c05a84b8>] (platform_drv_probe+0x50/0xb0)
[<c05a84b8>] (platform_drv_probe) from [<c05a6288>]
(driver_probe_device+0x33c/0x478)
Note that we also need to remove the related enable_irq() to avoid
getting the following:
WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:529 enable_irq+0x34/0x70
[<c01afa04>] (enable_irq) from [<c0c0f1fc>] (omap3_pm_init+0x118/0x3f8)
[<c0c0f1fc>] (omap3_pm_init) from [<c0c0ae7c>] (am35xx_init_late+0x10/0x18)
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The external request lines are used by tusb6010 on OMAP24xx platforms.
Update the map so the driver can use dmaengine API to request the DMA
channel. At the same time add temporary map containing only the external
DMA request numbers for DT booted case on omap24xx since the tusb6010 stack
is not yet supports DT boot.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- PM clean-up in preparation of adding am335x/am437x PM support
- Fixes for issues found by Coccinelle
- Legacy code removal now that everything boots in device
tree only mode
- Interconnect changes in preparation of moving clkctrl clocks
to be managed by clkctrl clock driver
- Interconnect changes to add omap4 crypto acceclerator
support
-----BEGIN PGP SIGNATURE-----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=8du/
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.13/soc-v4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
SoC changes for omap variants for v4.13 merge window:
- PM clean-up in preparation of adding am335x/am437x PM support
- Fixes for issues found by Coccinelle
- Legacy code removal now that everything boots in device
tree only mode
- Interconnect changes in preparation of moving clkctrl clocks
to be managed by clkctrl clock driver
- Interconnect changes to add omap4 crypto acceclerator
support
* tag 'omap-for-v4.13/soc-v4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (27 commits)
ARM: OMAP4: hwmod_data: add SHAM crypto accelerator
ARM: OMAP4: hwmod data: add des
ARM: OMAP4: hwmod data: add aes2
ARM: OMAP4: hwmod data: add aes1
ARM: OMAP2+: Remove unused legacy code for n8x0
ARM: OMAP2+: Remove unused legacy code for watchdog
ARM: OMAP2+: Remove unused legacy code for interconnects
ARM: OMAP2+: Remove unused legacy code for PRM
ARM: OMAP2+: Remove unused legacy code for io.c
ARM: OMAP2+: Remove unused legacy code for McBSP
ARM: OMAP2+: SmartReflex: Delete an error message for a failed memory allocation in two functions
ARM: OMAP2+: Use kcalloc() in sr_set_nvalues()
ARM: OMAP2+: Improve a size determination in sr_dev_init()
ARM: OMAP2+: Delete an error message for a failed memory allocation in two functions
ARM: OMAP2+: Remove unused legacy code for device init
ARM: OMAP2+: Remove unused legacy code for PMU
ARM: OMAP2+: Remove unused legacy code for opp
ARM: OMAP2+: hwmod: populate clkctrl clocks for hwmods if available
ARM: OMAP4: cminst: add support for clkdm_xlate_address
ARM: omap2+: clockdomain: add clkdm_xlate_address
...
Signed-off-by: Olof Johansson <olof@lixom.net>
The function name is now renamed to 'timer_probe' for consistency with
the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
OMAP4 SoC contains SHAM crypto hardware accelerator. Add hwmod data for
this IP so that it can be utilized by crypto frameworks.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This fixes the following error during kernel boot:
platform 480a5000.des: Cannot lookup hwmod 'des'
Unfortunately the DES module is only documented partly
in the OMAP4430 TRM. I found an old patch from Joel,
which I took over and updated for currently mainline.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This adds the hwmod entry for the second AES module
available on OMAP4.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This fixes the following error during kernel boot:
platform 4b501000.aes: Cannot lookup hwmod 'aes1'
Unfortunately the AES module is only documented partly
in the OMAP4430 TRM. I found an old patch from Joel,
which I took over and updated for currently mainline.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
[tony@atomide.com: left out probe changes to avoid merge conflict]
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
* A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kcalloc".
This issue was detected by using the Coccinelle software.
* Replace the specification of a data structure by a pointer dereference
to make the corresponding size determination a bit safer according to
the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.
Note that omap_init_sti() won't do anything so we can
remove omap2_init_devices() as pointed out by Sebastian
Reichel <sebastian.reichel@collabora.co.uk>.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.
Note that the volt_data is still being used.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
If clkctrl clocks are available on a device, populate these automatically
to replace hwmod main_clk info. First, the patch parses all "ti,clkctrl"
compatible nodes and maps these against existing clockdomain data. Once
done, individual hwmod init routines can search for a clkctrl clock
handle based on the clockdomain info and the created mapping.
This patch also drops the obsolete "_mod_ck" search as the implementation
required for this was not accepted usptream.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This function gets the physical base address of a clockdomain.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This new function can be used to get the physical address of a
clockdomain. Required for mapping the clkctrl clocks under hwmod
without modification to DT data.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
In some cases the physical address info is needed, so store this
under the existing cm*_base, prm_base and prcm_mpu_base variables.
These are converted now to structs that contain both virtual and
physical address base for the instance.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
These extra optional clocks are required as main clock for these modules
are going to be routed to the main module clock. Otherwise, the hdmi / tv
clocks are not going to be enabled during usage, leading to failure.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The mux clock handle shall be provided via "fck" DT handle. This avoids
the need to lookup the main clock via hwmod core, which will not work
with the clkctrl clock support anymore; the main clock is not going to
be a mux.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZF2pwAAoJEHm+PkMAQRiG9aAIAJJyV6Ux9kaX+glqO3KIs0wm
0K/yqMOv1JTfJ1UUgY4iZbk5XOPPmXv1bdKJFECZfuAHdymJUF/RVNNvDlZbaLdd
K8vDEi92eRwcf07a5b/Q2F8yNfADKKmRAA/oAbuQLBhJ0dPHig70PIvi9gq9kqiE
Ft1MinbsZLavYatLm7oVDr/nsYebEDMGwTy0EX5bF2YjydfAlCvVWnI5ld5wisiV
0fQF4W7MMjjcpAzG8uq3atEB8iQcWS2Ykz2chZRbYzHcdV2WJW751Vge9xc05Hzi
rxlqn6peZFiFyM0qdPLhY0ktGzSTZcCFeb3aZicvm5aOamy2KJjOSZrEwjU8kts=
=VHpx
-----END PGP SIGNATURE-----
Merge tag 'v4.12-rc1' into fixes
We've received a few fixes branches with -rc1 as base, but our contents was
still at pre-rc1. Merge it in expliticly to make 'git merge --log' clear on
hat was actually merged.
Signed-off-by: Olof Johansson <olof@lixom.net>
omap_pm_clkdms_setup gets called from pm init functions and now that
pm33xx and pm43xx can be loaded as modules this must be kept to be
called at any point during runtime.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
OMAP timer code registers two timers - one as clocksource
and one as clockevent. Since AM33XX has only one usable timer
in the WKUP domain one of the timers needs suspend-resume
support to restore the configuration to pre-suspend state.
commit adc78e6b99 ("timekeeping: Add suspend and resume
of clock event devices") introduced .suspend and .resume
callbacks for clock event devices. Leverage these
callbacks to have AM33XX clockevent timer behave properly
across system suspend. Extend the use of the .suspend and
.resume callbacks used by am335x clockevent to am437x as well.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
AM43XX has the same wakeupgen IP as OMAP4/5. The only
notable difference is the presence of 7 register banks
and lack of SAR area which has been used in OMAP4/5 for
saving and restoring the context around low power states.
In case of AM43XX the context is saved and restored by
the kernel. Introduce wakeupgen_ops so that context save
and restore can be set on a per-SoC basis during init.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
to me not catching up as quickly on patch review than anything else.
Overall it seems normal though, a few small changes to the core, mostly
small non-critical fixes here and there as well as driver updates for new
and existing hardware support. The biggest things are the TI clk driver
rework to lay the groundwork for clkctrl support in the next merge window
and the AmLogic audio/graphics clk support.
Core:
* clk_possible_parents debugfs file so we know which parents a clk
could possibly have
* Fix to make clk rate change notifiers stop on the first failure instead
of continuing
New Drivers:
* Mediatek MT6797 SoCs
* hi655x PMIC clks
* AmLogic Meson SoC i2s and spdif audio clks and Mali graphics clks
* Allwinner H5 SoCs and PRCM hardware
Updates:
* Nvidia Tegra T210 cleanups and non-critical fixes
* TI OMAP cleanups in preparation for clkctrl support
* Trivial fixes like kcalloc(), devm_* conversions, and seq_puts()
* ZTE zx296718 SoC VGA clks
* Rockchip clk-ids, fixups, and rename of rk1108 to rv1108
* Support for IDT VersaClock 5P49V5935
* Renesas R-Car H3 and M3-W IMR clks and ES2.0 rev of R-Car H3 support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=/5a/
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Sort of on the quieter side this time, which is probably due more to
me not catching up as quickly on patch review than anything else.
Overall it seems normal though, a few small changes to the core,
mostly small non-critical fixes here and there as well as driver
updates for new and existing hardware support.
The biggest things are the TI clk driver rework to lay the groundwork
for clkctrl support in the next merge window and the AmLogic
audio/graphics clk support.
Core:
- clk_possible_parents debugfs file so we know which parents a clk
could possibly have
- Fix to make clk rate change notifiers stop on the first failure
instead of continuing
New Drivers:
- Mediatek MT6797 SoCs
- hi655x PMIC clks
- AmLogic Meson SoC i2s and spdif audio clks and Mali graphics clks
- Allwinner H5 SoCs and PRCM hardware
Updates:
- Nvidia Tegra T210 cleanups and non-critical fixes
- TI OMAP cleanups in preparation for clkctrl support
- trivial fixes like kcalloc(), devm_* conversions, and seq_puts()
- ZTE zx296718 SoC VGA clks
- Rockchip clk-ids, fixups, and rename of rk1108 to rv1108
- IDT VersaClock 5P49V5935 support
- Renesas R-Car H3 and M3-W IMR clks and ES2.0 rev of R-Car H3
support"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (151 commits)
clk: x86: pmc-atom: Checking for IS_ERR() instead of NULL
clk: ti: divider: try to fix ti_clk_register_divider
clk: mvebu: Use kcalloc() in two functions
clk: mvebu: Use kcalloc() in of_cpu_clk_setup()
clk: nomadik: Delete error messages for a failed memory allocation in two functions
clk: nomadik: Use seq_puts() in nomadik_src_clk_show()
clk: Improve a size determination in two functions
clk: Replace four seq_printf() calls by seq_putc()
clk: si5351: Delete an error message for a failed memory allocation in si5351_i2c_probe()
clk: si5351: Use devm_kcalloc() in si5351_i2c_probe()
clk: at91: Use kcalloc() in of_at91_clk_pll_get_characteristics()
reset: mediatek: Add MT2701 ethsys reset controller include file
clk: mediatek: add mt2701 ethernet reset
clk: hi6220: Add the hi655x's pmic clock
clk: ti: fix building without legacy omap3
clk: ti: fix linker error with !SOC_OMAP4
clk: hi3620: Fix a typo in one variable name
clk: hi3620: Delete error messages for a failed memory allocation in two functions
clk: hi3620: Use kcalloc() in hi3620_mmc_clk_init()
clk: hisilicon: Delete error messages for failed memory allocations in hisi_clk_init()
...
When CONFIG_PM is disabled, we get a build error:
arch/arm/mach-omap2/omap-smp.c: In function 'omap4_smp_maybe_reset_cpu1':
arch/arm/mach-omap2/omap-smp.c:309:20: error: implicit declaration of function 'omap4_get_cpu1_ns_pa_addr'; did you mean 'omap4_get_scu_base'? [-Werror=implicit-function-declaration]
We need to fix this in multiple files, to ensure the declaration is visible,
to actually build the function without CONFIG_PM, and to only call it
when OMAP4 and/or OMAP5 are enabled.
Fixes: 351b7c4907 ("ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
for a few platforms:
* Gemini:
- Legacy platform that Linus Walleij has converted to multiplatform
and DT, so a handful of various tweaks there, removal of some old
stale support, etc.
* Atmel AT91:
- Fixup of various power management related pieces
- Move of SoC detection to a drivers/soc driver instead
* ST Micro STM32:
- New SoC support: STM32H743
* TI platforms:
- More driver support for Davinci (SATA in particular)
- Removal of some old stale hwmod files (linkspace platform)
* Misc:
- A couple of smaller patches for i.MX, sunxi, hisi
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZdtJ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
for a few platforms:
Gemini:
- Legacy platform that Linus Walleij has converted to multiplatform
and DT, so a handful of various tweaks there, removal of some old
stale support, etc.
Atmel AT91:
- Fixup of various power management related pieces
- Move of SoC detection to a drivers/soc driver instead
ST Micro STM32:
- New SoC support: STM32H743
TI platforms:
- More driver support for Davinci (SATA in particular)
- Removal of some old stale hwmod files (linkspace platform)
Misc:
- A couple of smaller patches for i.MX, sunxi, hisi"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits)
ARM: davinci: Add clock for CPPI 4.1 DMA engine
ARM: mxs: add support for I2SE Duckbill 2 boards
MAINTAINERS: Update the Allwinner sunXi entry
ARM: i.MX25: globally disable supervisor protect
ARM: at91: move SoC detection to its own driver
ARM: at91: pm: correct typo
ARM: at91: pm: Remove at91_pm_set_standby
ARM: at91: pm: Merge all at91sam9*_pm_init
ARM: at91: pm: Tie the USB clock mask to the pmc
ARM: at91: pm: Tie the memory controller type to the ramc id
ARM: at91: pm: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.
ARM: at91: pm: Simplify at91rm9200_standby
ARM: at91: pm: Use struct at91_pm_data in pm_suspend.S
ARM: at91: pm: Move global variables into at91_pm_data
ARM: at91: pm: Move at91_ramc_read/write to pm.c
ARM: at91: pm: Cleanup headers
MAINTAINERS: Add memory drivers to AT91 entry
MAINTAINERS: Update AT91 entry
ARM: davinci: add pata_bk3710 libata driver support
ARM: OMAP2+: mark omap_init_rng as __init
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=eE4D
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- add framework for supporting PCIe devices in Endpoint mode (Kishon
Vijay Abraham I)
- use non-postable PCI config space mappings when possible (Lorenzo
Pieralisi)
- clean up and unify mmap of PCI BARs (David Woodhouse)
- export and unify Function Level Reset support (Christoph Hellwig)
- avoid FLR for Intel 82579 NICs (Sasha Neftin)
- add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig)
- short-circuit config access failures for disconnected devices (Keith
Busch)
- remove D3 sleep delay when possible (Adrian Hunter)
- freeze PME scan before suspending devices (Lukas Wunner)
- stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava)
- disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann)
- add arch-specific alignment control to improve device passthrough by
avoiding multiple BARs in a page (Yongji Xie)
- add sysfs sriov_drivers_autoprobe to control VF driver binding
(Bodong Wang)
- allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas)
- fix crashes when unbinding host controllers that don't support
removal (Brian Norris)
- add driver for MicroSemi Switchtec management interface (Logan
Gunthorpe)
- add driver for Faraday Technology FTPCI100 host bridge (Linus
Walleij)
- add i.MX7D support (Andrey Smirnov)
- use generic MSI support for Aardvark (Thomas Petazzoni)
- make Rockchip driver modular (Brian Norris)
- advertise 128-byte Read Completion Boundary support for Rockchip
(Shawn Lin)
- advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin)
- convert atomic_t to refcount_t in HV driver (Elena Reshetova)
- add CPU IRQ affinity in HV driver (K. Y. Srinivasan)
- fix PCI bus removal in HV driver (Long Li)
- add support for ThunderX2 DMA alias topology (Jayachandran C)
- add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki)
- add ITE 8893 bridge DMA alias quirk (Jarod Wilson)
- restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
(Manish Jaggi)
* tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits)
PCI: Don't allow unbinding host controllers that aren't prepared
ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
MAINTAINERS: Add PCI Endpoint maintainer
Documentation: PCI: Add userguide for PCI endpoint test function
tools: PCI: Add sample test script to invoke pcitest
tools: PCI: Add a userspace tool to test PCI endpoint
Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
misc: Add host side PCI driver for PCI test function device
PCI: Add device IDs for DRA74x and DRA72x
dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
PCI: dwc: dra7xx: Workaround for errata id i870
dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
PCI: dwc: dra7xx: Add EP mode support
PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
dt-bindings: PCI: Add DT bindings for PCI designware EP mode
PCI: dwc: designware: Add EP mode support
Documentation: PCI: Add binding documentation for pci-test endpoint function
ixgbe: Use pcie_flr() instead of duplicating it
IB/hfi1: Use pcie_flr() instead of duplicating it
PCI: imx6: Fix spelling mistake: "contol" -> "control"
...
While examining output from trial builds with -Wformat-security enabled,
many strings were found that should be defined as "const", or as a char
array instead of char pointer. This makes some static analysis easier,
by producing fewer false positives.
As these are all trivial changes, it seemed best to put them all in a
single patch rather than chopping them up per maintainer.
Link: http://lkml.kernel.org/r/20170405214711.GA5711@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Jes Sorensen <jes@trained-monkey.org> [runner.c]
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Salil Mehta <salil.mehta@huawei.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Antonio Quartulli <a@unstable.cc>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Kejian Yan <yankejian@huawei.com>
Cc: Daode Huang <huangdaode@hisilicon.com>
Cc: Qianqian Xie <xieqianqian@huawei.com>
Cc: Philippe Reynes <tremyfr@gmail.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Christian Gromm <christian.gromm@microchip.com>
Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Cc: Jason Litzinger <jlitzingerdev@gmail.com>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The PCIe programming sequence in TRM suggests CLKSTCTRL of PCIe should be
set to SW_WKUP. There are no issues when CLKSTCTRL is set to HW_AUTO in RC
mode. However in EP mode, the host system is not able to access the
MEMSPACE and setting the CLKSTCTRL to SW_WKUP fixes it.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Starting from commit 5de85b9d57 ("PM / runtime: Re-init runtime PM
states at probe error and driver unbind") pm_runtime core now changes
device runtime_status back to after RPM_SUSPENDED after a probe defer.
Certain OMAP devices make use of "ti,no-idle-on-init" flag which causes
omap_device_enable to be called during the BUS_NOTIFY_ADD_DEVICE event
during probe, along with pm_runtime_set_active.
This call to pm_runtime_set_active typically will prevent a call to
pm_runtime_get in a driver probe function from re-enabling the
omap_device. However, in the case of a probe defer that happens before
the driver probe function is able to run, such as a missing pinctrl
states defer, pm_runtime_reinit will set the device as RPM_SUSPENDED and
then once driver probe is actually able to run, pm_runtime_get will see
the device as suspended and call through to the omap_device layer,
attempting to enable the already enabled omap_device and causing errors
like this:
omap-gpmc 50000000.gpmc: omap_device: omap_device_enable() called from
invalid state 1
omap-gpmc 50000000.gpmc: use pm_runtime_put_sync_suspend() in driver?
We can avoid this error by making sure the pm_runtime status of a device
matches the omap_device state before a probe attempt. By extending the
omap_device bus notifier to act on the BUS_NOTIFY_BIND_DRIVER event we
can check if a device is enabled in omap_device but with a pm_runtime
status of RPM_SUSPENDED and once again mark the device as RPM_ACTIVE to
avoid a second incorrect call to omap_device_enable.
Fixes: 5de85b9d57 ("PM / runtime: Re-init runtime PM states at probe
error and driver unbind")
Tested-by: Franklin S Cooper Jr. <fcooper@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
I found this section mismatch when building with an older
compiler release:
WARNING: vmlinux.o(.text+0x3051c): Section mismatch in reference from the
function omap_init_rng() to the function .init.text:omap_device_build()
Obviously this one function should be __init as well. Normally
we don't get a warning as the function gets inlined into its
caller.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[tony@atomide.com: formatted error message a bit]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add the SATA clockdomain (part of CM_DEFAULT) and a hwmod for the SATA
block on dm81xx.
Tested on DM8168 EVM.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
[Bartosz: removed an unused define]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
It seems that if L3_INIT clkdomain is kept in HW_AUTO while usb_otg_ss
is in use then there are random chances that the usb_otg_ss module
will fail to completely idle. i.e. IDLEST = 0x2 instead of 0x3.
Preventing L3_INIT from HW_AUTO while usb_otg_ss module is in use
fixes this issue.
We don't know yet if usb_otg_ss instances 3 and 4 are affected by this
issue or not so don't add this flag for those instances.
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add HWMOD_CLKDM_NOAUTO flag to DCAN1 module.
Without this DCAN1 module remains stuck in transition
after the CAN interface is brought down. This is also suggested
in Errata i893 "DCAN Initialization Sequence".
Add the HWMOD_CLKDM_NOAUTO to DCAN2 module as well
as it is mentioned in Errata i893.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit 3251885285 ("ARM: OMAP4+: Reset CPU1 properly for kexec") started
unconditionally resetting CPU1 because of a kexec boot issue I was seeing
earlier on omap4 when doing kexec boot between two different kernel
versions.
This caused issues on some systems. We should only reset CPU1 as a last
resort option, and try to avoid it where possible. Doing an unconditional
CPU1 reset causes issues for example when booting a bootloader configured
secure OS running on CPU1 as reported by Andrew F. Davis <afd@ti.com>.
We can't completely remove the reset of CPU1 as it would break kexec
booting from older kernels. But we can limit the CPU1 reset to cases
where CPU1 is wrongly parked within the memory area used by the booting
kernel. Then later on we can add support for parking CPU1 for kexec out
of the SDRAM back to bootrom.
So let's first fix the regression reported by Andrew by making CPU1 reset
conditional. To do this, we need to:
1. Save configured AUX_CORE_BOOT_1 for later
2. Modify AUX_CORE_BOOT_0 reading code to for HS SoCs to return
the whole register instead of the CPU mask
3. Check if CPU1 is wrongly parked into the booting kernel by the
previous kernel and reset if needed
Fixes: 3251885285 ("ARM: OMAP4+: Reset CPU1 properly for kexec")
Reported-by: Andrew F. Davis <afd@ti.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Tested-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Introduce HWMOD_CLKDM_NOAUTO flag that allows the hwmod's
clockdomain to be prevented from HW_AUTO while the hwmod is active.
This is needed to workaround some modules which don't function
correctly with HW_AUTO. e.g. DCAN on DRA7.
Signed-off-by: Roger Quadros <rogerq@ti.com>
[nsekhar@ti.com: rebased to v4.9 kernel]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
'flags' member of omap_hwmod structure is fast running
out of space with 16 different flags already defined.
Make flags a 32-bit entity so as to allow for more flags.
This results is a ~2.3K data section size increase with
omap2plus_defconfig on v4.11-rc2.
before:
text data bss dec hex filename
8186930 3082444 8252992 19522366 129e33e vmlinux
after:
text data bss dec hex filename
8186922 3084812 8252992 19524726 129ec76 vmlinux
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
