Commit Graph

18 Commits

Author SHA1 Message Date
Colin Xu
a94cf2e0ef drm/i915/gvt: Enable mmio context init and switch for BXT.
Handle pending tlb flush, mocs/mmio switch and context as KBL.

Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-06-13 10:57:29 +08:00
Chris Wilson
1fc44d9b1a drm/i915: Store a pointer to intel_context in i915_request
To ease the frequent and ugly pointer dance of
&request->gem_context->engine[request->engine->id] during request
submission, store that pointer as request->hw_context. One major
advantage that we will exploit later is that this decouples the logical
context state from the engine itself.

v2: Set mock_context->ops so we don't crash and burn in selftests.
    Cleanups from Tvrtko.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517212633.24934-3-chris@chris-wilson.co.uk
2018-05-18 09:35:22 +01:00
Chris Wilson
ab82a0635c drm/i915: Wrap engine->context_pin() and engine->context_unpin()
Make life easier in upcoming patches by moving the context_pin and
context_unpin vfuncs into inline helpers.

v2: Fixup mock_engine to mark the context as pinned on use.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180430131503.5375-2-chris@chris-wilson.co.uk
2018-04-30 16:01:13 +01:00
Dave Airlie
2b4f44eec2 Linux 4.16-rc7
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJauCZfAAoJEHm+PkMAQRiGWGUH/2rhdQDkoJpYWnjaQkolECG8
 MxpGE7nmIIHxQcbSDdHTGJ8IhVm6Z5wZ7ym/PwCDTT043Y1y341sJrIwL2/nTG6d
 HVidk8hFvgN6QzlzVAHT3ZZMII/V9Zt+VV5SUYLGnPAVuJNHo/6uzWlTU5g+NTFo
 IquFDdQUaGBlkKqby+NoAFnkV1UAIkW0g22cfvPnlO5GMer0gusGyVNvVp7TNj3C
 sqj4Hvt3RMDLMNe9RZ2pFTiOD096n8FWpYftZneUTxFImhRV3Jg5MaaYZm9SI3HW
 tXrv/LChT/F1mi5Pkx6tkT5Hr8WvcrwDMJ4It1kom10RqWAgjxIR3CMm448ileY=
 =YKUG
 -----END PGP SIGNATURE-----

Backmerge tag 'v4.16-rc7' into drm-next

Linux 4.16-rc7

This was requested by Daniel, and things were getting
a bit hard to reconcile, most of the conflicts were
trivial though.
2018-03-28 14:30:41 +10:00
Xiong Zhang
b24881e0b0 drm/i915/gvt: Add runtime_pm_get/put into gvt_switch_mmio
If user continuously create vgpu, boot guest, shoutdown guest and destroy
vgpu from remote, the following calltrace exists in dmesg sometimes:
[ 6412.954721] RPM wakelock ref not held during HW access
[ 6412.954795] WARNING: CPU: 7 PID: 11941 at
linux/drivers/gpu/drm/i915/intel_drv.h:1800
intel_uncore_forcewake_get.part.7+0x96/0xa0 [i915]
[ 6412.954915] Call Trace:
[ 6412.954951] intel_uncore_forcewake_get+0x18/0x20 [i915]
[ 6412.954989] intel_gvt_switch_mmio+0x8e/0x770 [i915]
[ 6412.954996] ? __slab_free+0x14d/0x2c0
[ 6412.955001] ? __slab_free+0x14d/0x2c0
[ 6412.955006] ? __slab_free+0x14d/0x2c0
[ 6412.955041] intel_vgpu_stop_schedule+0x92/0xd0 [i915]
[ 6412.955073] intel_gvt_deactivate_vgpu+0x48/0x60 [i915]
[ 6412.955078] __intel_vgpu_release+0x55/0x260 [kvmgt]

when this happens, gvt_switch_mmio is called at vgpu destroy, host i915 is
idle and doesn't hold RPM wakelock, igd is in powersave mode, but
gvt_switch_mmio require igd power on to access register, so
intel_runtime_pm_get should be added to make sure igd power on before
gvt_switch_mmio.

v2: Move runtime_pm_get/put into gvt_switch_mmio.(Zhenyu)

Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
2018-03-09 21:53:18 +08:00
Weinan Li
cd7e61b93d drm/i915/gvt: init mmio by lri command in vgpu inhibit context
There is one issue relates to Coarse Power Gating(CPG) on KBL NUC in GVT-g,
vgpu can't get the correct default context by updating the registers before
inhibit context submission. It always get back the hardware default value
unless the inhibit context submission happened before the 1st time
forcewake put. With this wrong default context, vgpu will run with
incorrect state and meet unknown issues.

The solution is initialize these mmios by adding lri command in ring buffer
of the inhibit context, then gpu hardware has no chance to go down RC6 when
lri commands are right being executed, and then vgpu can get correct
default context for further use.

v3:
- fix code fault, use 'for' to loop through mmio render list(Zhenyu)

v4:
- save the count of engine mmio need to be restored for inhibit context and
  refine some comments. (Kevin)

v5:
- code rebase

Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-03-06 13:19:23 +08:00
Weinan Li
64f46f55bb drm/i915/gvt: add interface to check if context is inhibit
No functional change, just for easy to use.

v4:
- refine comment (Kevin)

Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-03-06 13:19:22 +08:00
Weinan Li
f9a651c05d drm/i915/gvt: add define GEN9_MOCS_SIZE
No functional change. This defination will also be used in future patchesi.

v4:
- refine patch description (Kevin)

Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-03-06 13:19:22 +08:00
Weinan Li
37ad4e6878 drm/i915/gvt: add 0xe4f0 into gen9 render list
Guest may set this register on KBL platform, it can impact hardware
behavior, so add it into the gen9 render list. Otherwise gpu hang issue may
happen during different vgpu switch.

v2: separate it from patch set.

Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-02-14 10:34:30 +08:00
Michel Thierry
8466169ab9 drm/i915/gvt: Do not use I915_NUM_ENGINES to iterate over the mocs regs array
The mocs reg array is defined locally but then we iterate over its
elements using I915_NUM_ENGINES. There is no 'hard' connection between
I915_NUM_ENGINES and the regs array and there will be problems if either
of them increases.

Use the size of the mocs reg array instead to safely iterate over it.

Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Weinan Li <weinan.z.li@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01 07:31:07 -08:00
Xiong Zhang
d9df2c0943 drm/i915/gvt: Fix gen8/9_render_mmio_list[0] don't take effect
while(mmio++) increase mmio to next, mmio[0] never take effect
in while loop.

This patch change while to for and fix the above issue.

v2: Correct Fixes format.(Zhenyu)
v3: Rebase to latest staging.(Zhenyu)

Fixes: 83164886e455("drm/i915/gvt: Select appropriate mmio list at initialization time")
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01 07:30:17 -08:00
Zhenyu Wang
90551a1296 drm/i915/gvt: cleanup usage for typed mmio reg vs. offset
We had previous hack that tried to accept either i915_reg_t or offset
value to access vGPU virtual/shadow regs which broke that purpose to
be type safe in context. This one trys to explicitly separate the usage
of typed mmio reg with real offset.

Old vgpu_vreg(offset) helper is used only for offset now with new
vgpu_vreg_t(reg) is used for i915_reg_t only. Convert left usage
of that to new helper.

Also fixed left KASAN warning issues caused by previous hack.

v2: rebase, fixup against recent mmio switch change

Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-12-22 16:33:03 +08:00
Weinan Li
b05b33970e drm/i915/gvt: load host render mocs once in mocs switch
Load host render mocs registers once for delta update of mocs switch, it
reduces mmio read times obviously, then brings performance improvement
during multi-vms switch.

Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-12-18 16:30:24 +08:00
Weinan Li
f402f2d6c3 drm/i915/gvt: refine mocs save restore policy
Save and restore the mocs regs of one VM in GVT-g burning too much CPU
utilization. Add LRI command scan to monitor the change of mocs registers,
save the state in vreg, and use delta update policy to restore them.
It can obviously reduce the MMIO r/w count, and improve the performance
of context switch.

Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-12-18 16:30:20 +08:00
Weinan Li
e47107ad37 drm/i915/gvt: optimize for vGPU mmio switch
Now mmio switch between vGPUs need to switch to host first then to expected
vGPU, it waste one time mmio save/restore. r/w mmio usually is
time-consuming, and there are so many mocs registers need to save/restore
during vGPU switch. Combine the switch_to_host and switch_to_vgpu can
reduce 1 time mmio save/restore, it will reduce the CPU utilization and
performance while there is multi VMs with heavy work load.

Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-12-18 16:30:07 +08:00
Weinan Li
dc5718f47c drm/i915/gvt: refine trace_render_mmio
Refine trace_render_mmio to show the vm id before and after vgpu switch,
tag host id as '0', this patch will be used in the future patch for refine
mocs switch policy.

Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-12-18 16:30:03 +08:00
Rodrigo Vivi
07825e4b93 Merge tag 'gvt-next-2017-12-14' of https://github.com/intel/gvt-linux into drm-intel-next-queued
gvt-next-2017-12-14:

- fixes for two coverity scan errors (Colin)
- mmio switch code refine (Changbin)
- more virtual display dmabuf fixes (Tina/Gustavo)
- misc cleanups (Pei)

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171214033434.jlppjlyal5d67ya7@zhen-hp.sh.intel.com
2017-12-14 10:57:41 -08:00
Changbin Du
1aec75ee32 drm/i915/gvt: Rename file render.{c, h} to mmio_context.{c, h}
Rename the files to reflect their real role - to switch the mmio context of
each vGPU engine.

v2: update Makefile.

Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-12-08 16:18:32 +08:00