It has been reported that some TIS based TPMs are giving unexpected
errors when using the O_NONBLOCK path of the TPM device. The problem
is that some TPMs don't like it when you get and then relinquish a
locality (as the tpm_try_get_ops()/tpm_put_ops() pair does) without
sending a command. This currently happens all the time in the
O_NONBLOCK write path. Fix this by moving the tpm_try_get_ops()
further down the code to after the O_NONBLOCK determination is made.
This is safe because the priv->buffer_mutex still protects the priv
state being modified.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206275
Fixes: d23d124843 ("tpm: fix invalid locking in NONBLOCKING mode")
Reported-by: Mario Limonciello <Mario.Limonciello@dell.com>
Tested-by: Alex Guzman <alex@guzman.io>
Cc: stable@vger.kernel.org
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
When building very large kernels, the logic that emits replacement
sequences for alternatives fails when relative branches are present
in the code that is emitted into the .altinstr_replacement section
and patched in at the original site and fixed up. The reason is that
the linker will insert veneers if relative branches go out of range,
and due to the relative distance of the .altinstr_replacement from
the .text section where its branch targets usually live, veneers
may be emitted at the end of the .altinstr_replacement section, with
the relative branches in the sequence pointed at the veneers instead
of the actual target.
The alternatives patching logic will attempt to fix up the branch to
point to its original target, which will be the veneer in this case,
but given that the patch site is likely to be far away as well, it
will be out of range and so patching will fail. There are other cases
where these veneers are problematic, e.g., when the target of the
branch is in .text while the patch site is in .init.text, in which
case putting the replacement sequence inside .text may not help either.
So let's use subsections to emit the replacement code as closely as
possible to the patch site, to ensure that veneers are only likely to
be emitted if they are required at the patch site as well, in which
case they will be in range for the replacement sequence both before
and after it is transported to the patch site.
This will prevent alternative sequences in non-init code from being
released from memory after boot, but this is tolerable given that the
entire section is only 512 KB on an allyesconfig build (which weighs in
at 500+ MB for the entire Image). Also, note that modules today carry
the replacement sequences in non-init sections as well, and any of
those that target init code will be emitted into init sections after
this change.
This fixes an early crash when booting an allyesconfig kernel on a
system where any of the alternatives sequences containing relative
branches are activated at boot (e.g., ARM64_HAS_PAN on TX2)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Dave P Martin <dave.martin@arm.com>
Link: https://lore.kernel.org/r/20200630081921.13443-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Rather than disable all warnings with -w, disable specific warnings.
Predicate enabling the warnings on a recent version of bison.
Tested with GCC 9.3.0 and clang 9.0.1.
Committer testing:
The full set of compilers, gcc and clang that this will be tested on
will be on the signed tag when this change goes upstream.
Had to add -Wno-switch-enum to build on opensuse tumbleweed:
/tmp/build/perf/util/parse-events-bison.c: In function 'yydestruct':
/tmp/build/perf/util/parse-events-bison.c:1200:3: error: enumeration value 'YYSYMBOL_YYEMPTY' not handled in switch [-Werror=switch-enum]
1200 | switch (yykind)
| ^~~~~~
/tmp/build/perf/util/parse-events-bison.c:1200:3: error: enumeration value 'YYSYMBOL_YYEOF' not handled in switch [-Werror=switch-enum]
Also replace -Wno-error=implicit-function-declaration with -Wno-implicit-function-declaration.
Also needed to check just the first two levels of the bison version, as
the patch was assuming that all versions were of the form x.y.z, and
there are several cases where it is just x.y, breaking the build.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200619043356.90024-11-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rather than disable all warnings with -w, disable specific warnings.
Predicate enabling the warnings on more recent flex versions.
Tested with GCC 9.3.0 and clang 9.0.1.
Committer notes:
The full set of compilers, gcc and clang that this will be tested on
will be on the signed tag when this change goes upstream.
Added -Wno-misleading-indentation to the flex_flags to overcome this on
opensuse tumbleweed when building with clang:
CC /tmp/build/perf/util/parse-events-flex.o
CC /tmp/build/perf/util/pmu.o
/tmp/build/perf/util/parse-events-flex.c:5038:13: error: misleading indentation; statement is not part of the previous 'if' [-Werror,-Wmisleading-indentation]
if ( ! yyg->yy_state_buf )
^
/tmp/build/perf/util/parse-events-flex.c:5036:9: note: previous statement is here
if ( ! yyg->yy_state_buf )
^
And we need to use this to redirect stderr to stdin and then grep in a
way that is acceptable for BusyBox shell:
2>&1 |
Previously I was using:
|&
Which seems to be bash specific.
Added -Wno-sign-compare to overcome this on systems such as centos:7:
CC /tmp/build/perf/util/parse-events-flex.o
CC /tmp/build/perf/util/pmu.o
CC /tmp/build/perf/util/pmu-flex.o
util/parse-events.l: In function 'parse_events_lex':
/tmp/build/perf/util/parse-events-flex.c:193:36: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
for ( yyl = n; yyl < yyleng; ++yyl )\
^
/tmp/build/perf/util/parse-events-flex.c:204:9: note: in expansion of macro 'YY_LESS_LINENO'
Added -Wno-unused-parameter to overcome this in systems such as
centos:7:
CC /tmp/build/perf/util/parse-events-flex.o
CC /tmp/build/perf/util/pmu.o
/tmp/build/perf/util/parse-events-flex.c: In function 'yy_fatal_error':
/tmp/build/perf/util/parse-events-flex.c:6265:58: error: unused parameter 'yyscanner' [-Werror=unused-parameter]
static void yy_fatal_error (yyconst char* msg , yyscan_t yyscanner)
^
Added -Wno-missing-declarations to build in systems such as centos:6:
/tmp/build/perf/util/parse-events-flex.c:6313: error: no previous prototype for 'parse_events_get_column'
/tmp/build/perf/util/parse-events-flex.c:6389: error: no previous prototype for 'parse_events_set_column'
And -Wno-missing-prototypes to cover older compilers:
-Wmissing-prototypes (C only)
Warn if a global function is defined without a previous prototype declaration. This warning is issued even if the definition itself provides a prototype. The aim is to detect global functions that fail to be declared in header files.
-Wmissing-declarations (C only)
Warn if a global function is defined without a previous declaration. Do so even if the definition itself provides a prototype. Use this option to detect global functions that are not declared in header files.
Older C compilers lack -Wno-misleading-indentation, check if it is
available before using it.
Also needed to check just the first two levels of the flex version, as
the patch was assuming that all versions were of the form x.y.z, and
there are several cases where it is just x.y, breaking the build.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200619043356.90024-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sparse complains on a call to get_compat_sigset, fix it. The "if"
right above explains that sigmask_arg->sigset is basically a
compat_sigset_t.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For private namespaces ns->head_disk is NULL, so add a NULL check
before updating the BDI capabilities.
Fixes: b2ce4d9069 ("nvme-multipath: set bdi capabilities once")
Reported-by: Avinash M N <Avinash.M.N@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Commit 59c7c3caaa intended to only silently ignore non retry-able
errors (DNR bit set) such that we can still identify misbehaving
controllers, and in the other hand propagate retry-able errors (DNR bit
cleared) so we don't wrongly abandon a namespace just because it happens
to be temporarily inaccessible.
The goal remains the same as the original commit where this was
introduced but unfortunately had the logic backwards.
Fixes: 59c7c3caaa ("nvme: fix possible hang when ns scanning fails during error recovery")
Reported-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Eric reported an issue where mounting -o recovery with a fuzzed fs
resulted in a kernel panic. This is because we tried to free the tree
node, except it was an error from the read. Fix this by properly
resetting the tree_root->node == NULL in this case. The panic was the
following
BTRFS warning (device loop0): failed to read tree root
BUG: kernel NULL pointer dereference, address: 000000000000001f
RIP: 0010:free_extent_buffer+0xe/0x90 [btrfs]
Call Trace:
free_root_extent_buffers.part.0+0x11/0x30 [btrfs]
free_root_pointers+0x1a/0xa2 [btrfs]
open_ctree+0x1776/0x18a5 [btrfs]
btrfs_mount_root.cold+0x13/0xfa [btrfs]
? selinux_fs_context_parse_param+0x37/0x80
legacy_get_tree+0x27/0x40
vfs_get_tree+0x25/0xb0
fc_mount+0xe/0x30
vfs_kern_mount.part.0+0x71/0x90
btrfs_mount+0x147/0x3e0 [btrfs]
? cred_has_capability+0x7c/0x120
? legacy_get_tree+0x27/0x40
legacy_get_tree+0x27/0x40
vfs_get_tree+0x25/0xb0
do_mount+0x735/0xa40
__x64_sys_mount+0x8e/0xd0
do_syscall_64+0x4d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Nik says: this is problematic only if we fail on the last iteration of
the loop as this results in init_tree_roots returning err value with
tree_root->node = -ERR. Subsequently the caller does: fail_tree_roots
which calls free_root_pointers on the bogus value.
Reported-by: Eric Sandeen <sandeen@redhat.com>
Fixes: b8522a1e5f ("btrfs: Factor out tree roots initialization during mount")
CC: stable@vger.kernel.org # 5.5+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add details how the pointer gets dereferenced ]
Signed-off-by: David Sterba <dsterba@suse.com>
Under somewhat convoluted conditions, it is possible to attempt to
release an extent_buffer that is under io, which triggers a BUG_ON in
btrfs_release_extent_buffer_pages.
This relies on a few different factors. First, extent_buffer reads done
as readahead for searching use WAIT_NONE, so they free the local extent
buffer reference while the io is outstanding. However, they should still
be protected by TREE_REF. However, if the system is doing signficant
reclaim, and simultaneously heavily accessing the extent_buffers, it is
possible for releasepage to race with two concurrent readahead attempts
in a way that leaves TREE_REF unset when the readahead extent buffer is
released.
Essentially, if two tasks race to allocate a new extent_buffer, but the
winner who attempts the first io is rebuffed by a page being locked
(likely by the reclaim itself) then the loser will still go ahead with
issuing the readahead. The loser's call to find_extent_buffer must also
race with the reclaim task reading the extent_buffer's refcount as 1 in
a way that allows the reclaim to re-clear the TREE_REF checked by
find_extent_buffer.
The following represents an example execution demonstrating the race:
CPU0 CPU1 CPU2
reada_for_search reada_for_search
readahead_tree_block readahead_tree_block
find_create_tree_block find_create_tree_block
alloc_extent_buffer alloc_extent_buffer
find_extent_buffer // not found
allocates eb
lock pages
associate pages to eb
insert eb into radix tree
set TREE_REF, refs == 2
unlock pages
read_extent_buffer_pages // WAIT_NONE
not uptodate (brand new eb)
lock_page
if !trylock_page
goto unlock_exit // not an error
free_extent_buffer
release_extent_buffer
atomic_dec_and_test refs to 1
find_extent_buffer // found
try_release_extent_buffer
take refs_lock
reads refs == 1; no io
atomic_inc_not_zero refs to 2
mark_buffer_accessed
check_buffer_tree_ref
// not STALE, won't take refs_lock
refs == 2; TREE_REF set // no action
read_extent_buffer_pages // WAIT_NONE
clear TREE_REF
release_extent_buffer
atomic_dec_and_test refs to 1
unlock_page
still not uptodate (CPU1 read failed on trylock_page)
locks pages
set io_pages > 0
submit io
return
free_extent_buffer
release_extent_buffer
dec refs to 0
delete from radix tree
btrfs_release_extent_buffer_pages
BUG_ON(io_pages > 0)!!!
We observe this at a very low rate in production and were also able to
reproduce it in a test environment by introducing some spurious delays
and by introducing probabilistic trylock_page failures.
To fix it, we apply check_tree_ref at a point where it could not
possibly be unset by a competing task: after io_pages has been
incremented. All the codepaths that clear TREE_REF check for io, so they
would not be able to clear it after this point until the io is done.
Stack trace, for reference:
[1417839.424739] ------------[ cut here ]------------
[1417839.435328] kernel BUG at fs/btrfs/extent_io.c:4841!
[1417839.447024] invalid opcode: 0000 [#1] SMP
[1417839.502972] RIP: 0010:btrfs_release_extent_buffer_pages+0x20/0x1f0
[1417839.517008] Code: ed e9 ...
[1417839.558895] RSP: 0018:ffffc90020bcf798 EFLAGS: 00010202
[1417839.570816] RAX: 0000000000000002 RBX: ffff888102d6def0 RCX: 0000000000000028
[1417839.586962] RDX: 0000000000000002 RSI: ffff8887f0296482 RDI: ffff888102d6def0
[1417839.603108] RBP: ffff88885664a000 R08: 0000000000000046 R09: 0000000000000238
[1417839.619255] R10: 0000000000000028 R11: ffff88885664af68 R12: 0000000000000000
[1417839.635402] R13: 0000000000000000 R14: ffff88875f573ad0 R15: ffff888797aafd90
[1417839.651549] FS: 00007f5a844fa700(0000) GS:ffff88885f680000(0000) knlGS:0000000000000000
[1417839.669810] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1417839.682887] CR2: 00007f7884541fe0 CR3: 000000049f609002 CR4: 00000000003606e0
[1417839.699037] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[1417839.715187] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[1417839.731320] Call Trace:
[1417839.737103] release_extent_buffer+0x39/0x90
[1417839.746913] read_block_for_search.isra.38+0x2a3/0x370
[1417839.758645] btrfs_search_slot+0x260/0x9b0
[1417839.768054] btrfs_lookup_file_extent+0x4a/0x70
[1417839.778427] btrfs_get_extent+0x15f/0x830
[1417839.787665] ? submit_extent_page+0xc4/0x1c0
[1417839.797474] ? __do_readpage+0x299/0x7a0
[1417839.806515] __do_readpage+0x33b/0x7a0
[1417839.815171] ? btrfs_releasepage+0x70/0x70
[1417839.824597] extent_readpages+0x28f/0x400
[1417839.833836] read_pages+0x6a/0x1c0
[1417839.841729] ? startup_64+0x2/0x30
[1417839.849624] __do_page_cache_readahead+0x13c/0x1a0
[1417839.860590] filemap_fault+0x6c7/0x990
[1417839.869252] ? xas_load+0x8/0x80
[1417839.876756] ? xas_find+0x150/0x190
[1417839.884839] ? filemap_map_pages+0x295/0x3b0
[1417839.894652] __do_fault+0x32/0x110
[1417839.902540] __handle_mm_fault+0xacd/0x1000
[1417839.912156] handle_mm_fault+0xaa/0x1c0
[1417839.921004] __do_page_fault+0x242/0x4b0
[1417839.930044] ? page_fault+0x8/0x30
[1417839.937933] page_fault+0x1e/0x30
[1417839.945631] RIP: 0033:0x33c4bae
[1417839.952927] Code: Bad RIP value.
[1417839.960411] RSP: 002b:00007f5a844f7350 EFLAGS: 00010206
[1417839.972331] RAX: 000000000000006e RBX: 1614b3ff6a50398a RCX: 0000000000000000
[1417839.988477] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002
[1417840.004626] RBP: 00007f5a844f7420 R08: 000000000000006e R09: 00007f5a94aeccb8
[1417840.020784] R10: 00007f5a844f7350 R11: 0000000000000000 R12: 00007f5a94aecc79
[1417840.036932] R13: 00007f5a94aecc78 R14: 00007f5a94aecc90 R15: 00007f5a94aecc40
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Convert fall through comments to the pseudo-keyword which is now the
preferred way.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The wait_event_... defines evaluate to long so we should not assign it an int as this may truncate
the value.
Reported-by: Marshall Midden <marshallmidden@gmail.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When xfstest generic/035, we found the target file was deleted
if the rename return -EACESS.
In cifs_rename2, we unlink the positive target dentry if rename
failed with EACESS or EEXIST, even if the target dentry is positived
before rename. Then the existing file was deleted.
We should just delete the target file which created during the
rename.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
The flag from the primary tcon needs to be copied into the volume info
so that cifs_get_tcon will try to enable extensions on the per-user
tcon. At that point, since posix extensions must have already been
enabled on the superblock, don't try to needlessly adjust the mount
flags.
Fixes: ce558b0e17 ("smb3: Add posix create context for smb3.11 posix mounts")
Fixes: b326614ea2 ("smb3: allow "posix" mount option to enable new SMB311 protocol extensions")
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Fixes: ca567eb2b3 ("SMB3: Allow persistent handle timeout to be configurable on mount")
Signed-off-by: Paul Aurich <paul@darkrain42.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Without this:
- persistent handles will only be enabled for per-user tcons if the
server advertises the 'Continuous Availabity' capability
- resilient handles would never be enabled for per-user tcons
Signed-off-by: Paul Aurich <paul@darkrain42.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Ensure multiuser SMB3 mounts use encryption for all users' tcons if the
mount options are configured to require encryption. Without this, only
the primary tcon and IPC tcons are guaranteed to be encrypted. Per-user
tcons would only be encrypted if the server was configured to require
encryption.
Signed-off-by: Paul Aurich <paul@darkrain42.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
This is useful for distinguishing SMB sessions on a multiuser mount.
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl78z3sTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXgvYB/j68NUgtrRt9jG+ggn57QvYmctycX1O
xpkSTf20jpxMIWWuBST+lceGnvlCaS1u2G3GaIvas7M34NzxU3I/bxRZgrsCHARY
tyu6eetLG8qGixipNJ1KGznyakQlP+vLEdgns0xMGMFqKA+Q5lUsF5Ypon1c2c93
5i10eEA1TM4w1VSR+ByE+syM+GtFZJqVBS+LOJP3wJUqxk46ItTDuIgz3sWZaiqX
fjXt2wqqiQEJel4Mx5aHhFwRxmHu09QnTBZYrbgtbN+jeGBQaPCPMo31vu6YmYXr
ekohrdfvO+cLSR/nihPv4wbF7lPUaRq+IFlRtjIYo6t5VfRHXJq/2Zs=
=DqIR
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fix from Wei Liu:
"One patch from Joseph to make panic reporting contain more useful
information"
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: Change flag to write log level in panic msg to false
Large clock values may overflow and show up as negative.
Reported by prOMiNd on IRC.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Renoir uses integrated_system_info table v12. The table
has the same layout as v11 with respect to this data. Just
reuse the existing code for v12 for stable.
Fixes incorrectly reported vram info in the driver output.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
CPU Measurement sampling facility on s390 does not support
perf tool collection of callchain data using --call-graph
option. The sampling facility collects samples in a ring
buffer which includes only the instruction address the
samples were taken. When the ring buffer hits a watermark,
a measurement alert interrupt is triggered and handled
by the performance measurement unit (PMU) device driver.
It collects the samples and feeds each sample to the
perf ring buffer in the common code via functions
perf_prepare_sample()/perf_output_sample(). When function
perf_prepare_sample() is called to collect sample data's
callchain, user register values or stack area, invalid
data is picked, because the context of the collected
information does not match the context when the sample
was taken.
There is currently no way to provide the callchain and other
information, because the hardware sampler does not collect this
information.
Therefore prohibit sampling when the user requests a callchain graph
from the hardware sampler. Return -EOPNOTSUPP to the user in this
case.
If call chains are really wanted, users need to specify software
event cpu-clock to get the callchain information from a
software event.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Programs added 'userprogs' should be compiled for the target
architecture i.e. the same architecture as the kernel.
GCC does this correctly since the target architecture is implied
by the toolchain prefix.
Clang builds userspace programs always for the host architecture
because the target triple is currently missing.
Fix this.
Fixes: 7f3a59db27 ("kbuild: add infrastructure to build userspace programs")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
scripts/cc-can-link.sh tests if the compiler can link userspace
programs.
When $(CC) is GCC, it is checked against the target architecture
because the toolchain prefix is specified as a part of $(CC).
When $(CC) is Clang, it is checked against the host architecture
because --target option is missing.
Pass $(CLANG_FLAGS) to scripts/cc-can-link.sh to evaluate the link
capability for the target architecture.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
There are 3 types that are not parsed by the debug info logic.
Add support for them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Instead of just changing the helper window to show a
dependency, also navigate to it at the config and menu
widgets.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
the goback button does nothing on splitMode. So, why display
it?
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The goBack() logic is used only for the configList, as
it only makes sense on singleMode. So, let's simplify the
code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The default implementation for setSelected() at QTreeWidgetItem
allows multiple items to be selected.
Well, this should never be possible for the configItem lists.
So, implement a function that will automatically clean any
previous selection. This simplifies the logic somewhat, while
making the selection logic to be applied atomically, avoiding
future issues on that.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The Qt5 conversion broke support for debug info links.
Restore the behaviour added by changeset
ab45d190fd ("kconfig: create links in info window").
The original approach was to pass a pointer for a data struct
via an <a href>. That doesn't sound a good idea, as, if something
gets wrong, the app could crash. So, instead, pass the name of
the symbol, and validate such symbol at the hyperlink handling
logic.
Link: https://lore.kernel.org/lkml/20200628125421.12458086@coco.lan/
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When the search dialog box finds symbols/menus that match
the search criteria, it presents all results at the window.
Clicking on a search result should make qconf to navigate
to the selected item. This works on singleMode and on
fullMode, but on splitMode, the navigation is broken.
This was partially caused by an incomplete Qt5 conversion
and by the followup patches that restored the original
behavior.
When qconf is on split mode, it has to update both the
config and the menu views. Right now, such logic is broken,
as it is not seeking using the right structures.
On qconf, the screen is split into 3 parts:
+------------+-------+
| | |
| Config | Menu |
| | |
+------------+-------+
| |
| ConfigInfo |
| |
+--------------------+
On singleMode and on fullMode, the menuView is hidden, and search
updates only the configList (which controls the ConfigView).
On SplitMode, the search logic should detect if the variable is a
leaf or not. If it is a leaf, it should be presented at the menuView,
and both configList and menuList should be updated. Otherwise, just
the configList should be updated.
Link: https://lore.kernel.org/lkml/a98b0f0ebe0c23615a76f1d23f25fd0c84835e6b.camel@redhat.com/
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The usage of c-like include is deprecated on modern Qt
versions. Use the c++ style includes.
While here, remove uneeded and redundant ones, sorting
them on alphabetic order.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Make sure a vcpu becoming non-resident doesn't race against the doorbell delivery
- Only advertise pvtime if accounting is enabled
- Return the correct error code if reset fails with SVE
- Make sure that pseudo-NMI functions are annotated as __always_inline
-----BEGIN PGP SIGNATURE-----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=ZjTT
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm fixes for 5.8, take #2
- Make sure a vcpu becoming non-resident doesn't race against the doorbell delivery
- Only advertise pvtime if accounting is enabled
- Return the correct error code if reset fails with SVE
- Make sure that pseudo-NMI functions are annotated as __always_inline
There are several copies of get_eflags() and set_eflags() and they all are
buggy. Consolidate them and fix them. The fixes are:
Add memory clobbers. These are probably unnecessary but they make sure
that the compiler doesn't move something past one of these calls when it
shouldn't.
Respect the redzone on x86_64. There has no failure been observed related
to this, but it's definitely a bug.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/982ce58ae8dea2f1e57093ee894760e35267e751.1593191971.git.luto@kernel.org
The SYSENTER frame setup was nonsense. It worked by accident because the
normal code into which the Xen asm jumped (entry_SYSENTER_32/compat) threw
away SP without touching the stack. entry_SYSENTER_compat was recently
modified such that it relied on having a valid stack pointer, so now the
Xen asm needs to invoke it with a valid stack.
Fix it up like SYSCALL: use the Xen-provided frame and skip the bare
metal prologue.
Fixes: 1c3e5d3f60 ("x86/entry: Make entry_64_compat.S objtool clean")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lkml.kernel.org/r/947880c41ade688ff4836f665d0c9fcaa9bd1201.1593191971.git.luto@kernel.org
The SYSENTER asm (32-bit and compat) contains fixups for regs->sp and
regs->flags. Move the fixups into C and fix some comments while at it.
This is a valid cleanup all by itself, and it also simplifies the
subsequent patch that will fix Xen PV SYSENTER.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/fe62bef67eda7fac75b8f3dbafccf571dc4ece6b.1593191971.git.luto@kernel.org
Now that the entry stack is a full page, it's too easy to regress the
system call entry code and end up on the wrong stack without noticing.
Assert that all system calls (SYSCALL64, SYSCALL32, SYSENTER, and INT80)
are on the right stack and have pt_regs in the right place.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/52059e42bb0ab8551153d012d68f7be18d72ff8e.1593191971.git.luto@kernel.org
- It fixes wrong return value by returing proper error value instead of
fixed one.
- It fixes ref count leak in mic_pre_enable.
One cleanup
- It removes dev_err() call on platform_get_irq() failure because
platform_get_irq() call dev_err() itself on failure.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=PEF5
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-fixes-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Two fixups
- It fixes wrong return value by returing proper error value instead of
fixed one.
- It fixes ref count leak in mic_pre_enable.
One cleanup
- It removes dev_err() call on platform_get_irq() failure because
platform_get_irq() call dev_err() itself on failure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1593395988-4612-1-git-send-email-inki.dae@samsung.com
A few fixes, mostly fallout from the address space refactor and dpu
color processing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGv0SSXArdYs=mOLqJPJdkvk8CpxaJGecqgbOGazQ2n5og@mail.gmail.com
[Why]
Changes that are fast don't require updating DLG parameters making
this call unnecessary. Considering this is an expensive call it should
not be done on every flip.
DML touches clocks, p-state support, DLG params and a few other DC
internal flags and these aren't expected during fast. A hang has been
reported with this change when called on every flip which suggests that
modifying these fields is not recommended behavior on fast updates.
[How]
Guard the validation to only happen if update type isn't FAST.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1191
Fixes: a24eaa5c51 ("drm/amd/display: Revalidate bandwidth before commiting DC updates")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Else there will be memory leak if alloc_disk() fails.
Fixes: 6a27b656fc ("block: virtio-blk: support multi virt queues per virtio-blk device")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 6ae72bfa65 ("PCI: Unify pcie_find_root_port() and
pci_find_pcie_root_port()") broke acpi_pci_bridge_d3() because calling
pcie_find_root_port() on a Root Port returned NULL when it should return
the Root Port, which in turn broke power management of PCIe hierarchies.
Rework pcie_find_root_port() so it returns its argument when it is already
a Root Port.
[bhelgaas: test device only once, test for PCIe]
Fixes: 6ae72bfa65 ("PCI: Unify pcie_find_root_port() and pci_find_pcie_root_port()")
Link: https://lore.kernel.org/r/20200622161248.51099-1-mika.westerberg@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
- Zero out unused characters of FileName field to avoid a complaint from some fsck tool.
- Fix memory leak on error paths.
- Fix unnecessary VOL_DIRTY set when calling rmdir on non-empty directory.
- Call sync_filesystem() for read-only remount(Fix generic/452 test in xfstests)
- Add own fsync() to flush dirty metadata.
-----BEGIN PGP SIGNATURE-----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=lu+d
-----END PGP SIGNATURE-----
Merge tag 'exfat-for-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fixes from Namjae Jeon:
- Zero out unused characters of FileName field to avoid a complaint
from some fsck tool.
- Fix memory leak on error paths.
- Fix unnecessary VOL_DIRTY set when calling rmdir on non-empty
directory.
- Call sync_filesystem() for read-only remount (Fix generic/452 test in
xfstests)
- Add own fsync() to flush dirty metadata.
* tag 'exfat-for-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: flush dirty metadata in fsync
exfat: move setting VOL_DIRTY over exfat_remove_entries()
exfat: call sync_filesystem for read-only remount
exfat: add missing brelse() calls on error paths
exfat: Set the unused characters of FileName field to the value 0000h
