Capture obvious events and replace dprintk() call sites. Introduce
infrastructure so that adding more tracepoints in this code later
is simplified.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
A couple of time_t variables are only used to track the state of the
lease time and its expiration. The code correctly uses the 'time_after()'
macro to make this work on 32-bit architectures even beyond year 2038,
but the get_seconds() function and the time_t type itself are deprecated
as they behave inconsistently between 32-bit and 64-bit architectures
and often lead to code that is not y2038 safe.
As a minor issue, using get_seconds() leads to problems with concurrent
settimeofday() or clock_settime() calls, in the worst case timeout never
triggering after the time has been set backwards.
Change nfsd to use time64_t and ktime_get_boottime_seconds() here. This
is clearly excessive, as boottime by itself means we never go beyond 32
bits, but it does mean we handle this correctly and consistently without
having to worry about corner cases and should be no more expensive than
the previous implementation on 64-bit architectures.
The max_cb_time() function gets changed in order to avoid an expensive
64-bit division operation, but as the lease time is at most one hour,
there is no change in behavior.
Also do the same for server-to-server copy expiration time.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[bfields@redhat.com: fix up copy expiration]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The nfsd4_blocked_lock->nbl_time timestamp is recorded in jiffies,
but then compared to a CLOCK_REALTIME timestamp later on, which makes
no sense.
For consistency with the other timestamps, change this to use a time_t.
This is a change in behavior, which may cause regressions, but the
current code is not sensible. On a system with CONFIG_HZ=1000,
the 'time_after((unsigned long)nbl->nbl_time, (unsigned long)cutoff))'
check is false for roughly the first 18 days of uptime and then true
for the next 49 days.
Fixes: 7919d0a27f ("nfsd: add a LRU list for blocked locks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The nii_time field gets truncated to 'time_t' on 32-bit architectures
before printing.
Remove the use of 'struct timespec' to product the correct output
beyond 2038.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Given a universal address, mount the source server from the destination
server. Use an internal mount. Call the NFS client nfs42_ssc_open to
obtain the NFS struct file suitable for nfsd_copy_range.
Ability to do "inter" server-to-server depends on the an nfsd kernel
parameter "inter_copy_offload_enable".
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Introducing the COPY_NOTIFY operation.
Create a new unique stateid that will keep track of the copy
state and the upcoming READs that will use that stateid.
Each associated parent stateid has a list of copy
notify stateids. A copy notify structure makes a copy of
the parent stateid and a clientid and will use it to look
up the parent stateid during the READ request (suggested
by Trond Myklebust <trond.myklebust@hammerspace.com>).
At nfs4_put_stid() time, we walk the list of the associated
copy notify stateids and delete them.
Laundromat thread will traverse globally stored copy notify
stateid in idr and notice if any haven't been referenced in the
lease period, if so, it'll remove them.
Return single netaddr to advertise to the copy.
Suggested-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
When we're destroying the client lease, and we call
nfsd4_shutdown_callback(), we must ensure that we do not return
before all outstanding callbacks have terminated and have
released their payloads.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Version 2 upcalls will allow the nfsd to include a hash of the kerberos
principal string in the Cld_Create upcall. If a principal is present in
the svc_cred, then the hash will be included in the Cld_Create upcall.
We attempt to use the svc_cred.cr_raw_principal (which is returned by
gssproxy) first, and then fall back to using the svc_cred.cr_principal
(which is returned by both gssproxy and rpc.svcgssd). Upon a subsequent
restart, the hash will be returned in the Cld_Gracestart downcall and
stored in the reclaim_str_hashtbl so it can be used when handling
reclaim opens.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Have nfs4_preprocess_stateid_op pass back a nfsd_file instead of a filp.
Since we now presume that the struct file will be persistent in most
cases, we can stop fiddling with the raparms in the read code. This
also means that we don't really care about the rd_tmp_file field
anymore.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Have them keep an nfsd_file reference instead of a struct file.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups. Because of this, there is going
to be some merge issues with your tree at the moment, I'll follow up
with the expected resolutions to make it easier for you.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups (will cause build warnings
with s390 and coresight drivers in your tree)
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse
easier due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of merge
issues that Stephen has been patient with me for. Other than the merge
issues, functionality is working properly in linux-next :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSgpnQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykcwgCfS30OR4JmwZydWGJ7zK/cHqk+KjsAnjOxjC1K
LpRyb3zX29oChFaZkc5a
=XrEZ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse easier
due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of
merge issues that Stephen has been patient with me for"
* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
debugfs: make error message a bit more verbose
orangefs: fix build warning from debugfs cleanup patch
ubifs: fix build warning after debugfs cleanup patch
driver: core: Allow subsystems to continue deferring probe
drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
arch_topology: Remove error messages on out-of-memory conditions
lib: notifier-error-inject: no need to check return value of debugfs_create functions
swiotlb: no need to check return value of debugfs_create functions
ceph: no need to check return value of debugfs_create functions
sunrpc: no need to check return value of debugfs_create functions
ubifs: no need to check return value of debugfs_create functions
orangefs: no need to check return value of debugfs_create functions
nfsd: no need to check return value of debugfs_create functions
lib: 842: no need to check return value of debugfs_create functions
debugfs: provide pr_fmt() macro
debugfs: log errors when something goes wrong
drivers: s390/cio: Fix compilation warning about const qualifiers
drivers: Add generic helper to match by of_node
driver_find_device: Unify the match function with class_find_device()
bus_find_device: Unify the match callback with class_find_device
...
Decode the implementation ID and display in nfsd/clients/#/info. It may
be help identify the client. It won't be used otherwise.
(When this went into the protocol, I thought the implementation ID would
be a slippery slope towards implementation-specific workarounds as with
the http user-agent. But I guess I was wrong, the risk seems pretty low
now.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Keep a second reference count which is what is really used to decide
when to free the client's memory.
Next I'm going to add an nfsd/clients/ directory with a subdirectory for
each NFSv4 client. File objects under nfsd/clients/ will hold these
references.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Rename this to a more descriptive name: it counts the number of
in-progress rpc's referencing this client.
Next I'm going to add a second refcount with a slightly different use.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190612152603.GB18440@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This will allow the reclaim_str_hashtbl to store either the recovery
directory names used by the legacy client tracking code or the full
client strings used by the nfsdcld client tracking code.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If there are multiple callbacks queued, waiting for the callback
slot when the callback gets shut down, then they all currently
end up acting as if they hold the slot, and call
nfsd4_cb_sequence_done() resulting in interesting side-effects.
In addition, the 'retry_nowait' path in nfsd4_cb_sequence_done()
causes a loop back to nfsd4_cb_prepare() without first freeing the
slot, which causes a deadlock when nfsd41_cb_get_slot() gets called
a second time.
This patch therefore adds a boolean to track whether or not the
callback did pick up the slot, so that it can do the right thing
in these 2 cases.
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
SUNRPC has two sorts of credentials, both of which appear as
"struct rpc_cred".
There are "generic credentials" which are supplied by clients
such as NFS and passed in 'struct rpc_message' to indicate
which user should be used to authorize the request, and there
are low-level credentials such as AUTH_NULL, AUTH_UNIX, AUTH_GSS
which describe the credential to be sent over the wires.
This patch replaces all the generic credentials by 'struct cred'
pointers - the credential structure used throughout Linux.
For machine credentials, there is a special 'struct cred *' pointer
which is statically allocated and recognized where needed as
having a special meaning. A look-up of a low-level cred will
map this to a machine credential.
Signed-off-by: NeilBrown <neilb@suse.com>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Upon receiving a request for async copy, create a new kthread. If we
get asynchronous request, make sure to copy the needed arguments/state
from the stack before starting the copy. Then start the thread and reply
back to the client indicating copy is asynchronous.
nfsd_copy_file_range() will copy in a loop over the total number of
bytes is needed to copy. In case a failure happens in the middle, we
ignore the error and return how much we copied so far. Once done
creating a workitem for the callback workqueue and send CB_OFFLOAD with
the results.
The lifetime of the copy stateid is bound to the vfs copy. This way we
don't need to keep the nfsd_net structure for the callback. We could
keep it around longer so that an OFFLOAD_STATUS that came late would
still get results, but clients should be able to deal without that.
We handle OFFLOAD_CANCEL by sending a signal to the copy thread and
calling kthread_stop.
A client should cancel any ongoing copies before calling DESTROY_CLIENT;
if not, we return a CLIENT_BUSY error.
If the client is destroyed for some other reason (lease expiration, or
server shutdown), we must clean up any ongoing copies ourselves.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
[colin.king@canonical.com: fix leak in error case]
[bfields@fieldses.org: remove signalling, merge patches]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: The global callback_cred is no longer used, so it can be
removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable nfs4_file.fi_ref is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable nfs4_cntl_odstate.co_odcount is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable nfs4_stid.sc_count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The spec allows us to return NFS4ERR_SEQ_FALSE_RETRY if we notice that
the client is making a call that matches a previous (slot, seqid) pair
but that *isn't* actually a replay, because some detail of the call
doesn't actually match the previous one.
Catching every such case is difficult, but we may as well catch a few
easy ones. This also handles the case described in the previous patch,
in a different way.
The spec does however require us to catch the case where the difference
is in the rpc credentials. This prevents somebody from snooping another
user's replies by fabricating retries.
(But the practical value of the attack is limited by the fact that the
replies with the most sensitive data are READ replies, which are not
normally cached.)
Tested-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently our handling of 4.1+ requests without "cachethis" set is
confusing and not quite correct.
Suppose a client sends a compound consisting of only a single SEQUENCE
op, and it matches the seqid in a session slot (so it's a retry), but
the previous request with that seqid did not have "cachethis" set.
The obvious thing to do might be to return NFS4ERR_RETRY_UNCACHED_REP,
but the protocol only allows that to be returned on the op following the
SEQUENCE, and there is no such op in this case.
The protocol permits us to cache replies even if the client didn't ask
us to. And it's easy to do so in the case of solo SEQUENCE compounds.
So, when we get a solo SEQUENCE, we can either return the previously
cached reply or NFSERR_SEQ_FALSE_RETRY if we notice it differs in some
way from the original call.
Currently, we're returning a corrupt reply in the case a solo SEQUENCE
matches a previous compound with more ops. This actually matters
because the Linux client recently started doing this as a way to recover
from lost replies to idempotent operations in the case the process doing
the original reply was killed: in that case it's difficult to keep the
original arguments around to do a real retry, and the client no longer
cares what the result is anyway, but it would like to make sure that the
slot's sequence id has been incremented, and the solo SEQUENCE assures
that: if the server never got the original reply, it will increment the
sequence id. If it did get the original reply, it won't increment, and
nothing else that about the reply really matters much. But we can at
least attempt to return valid xdr!
Tested-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The rpccred gotten from rpc_lookup_machine_cred() should be put when
state is shutdown.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd assigns the nfs4_free_lock_stateid to .sc_free in init_lock_stateid().
If nfsd doesn't go through init_lock_stateid() and put stateid at end,
there is a NULL reference to .sc_free when calling nfs4_put_stid(ns).
This patch let the nfs4_stid.sc_free assignment to nfs4_alloc_stid().
Cc: stable@vger.kernel.org
Fixes: 356a95ece7 "nfsd: clean up races in lock stateid searching..."
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's possible for a client to call in on a lock that is blocked for a
long time, but discontinue polling for it. A malicious client could
even set a lock on a file, and then spam the server with failing lock
requests from different lockowners that pile up in a DoS attack.
Add the blocked lock structures to a per-net namespace LRU when hashing
them, and timestamp them. If the lock request is not revisited after a
lease period, we'll drop it under the assumption that the client is no
longer interested.
This also gives us a mechanism to clean up these objects at server
shutdown time as well.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Create a new per-lockowner+per-inode structure that contains a
file_lock. Have nfsd4_lock add this structure to the lockowner's list
prior to setting the lock. Then call the vfs and request a blocking lock
(by setting FL_SLEEP). If we get anything besides FILE_LOCK_DEFERRED
back, then we dequeue the block structure and free it. When the next
lock request comes in, we'll look for an existing block for the same
filehandle and dequeue and reuse it if there is one.
When the lock comes free (a'la an lm_notify call), we dequeue it
from the lockowner's list and kick off a CB_NOTIFY_LOCK callback to
inform the client that it should retry the lock request.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add the encoding/decoding for CB_NOTIFY_LOCK operations.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We already have that info in the client pointer. No need to pass around
a copy.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This addresses the conundrum referenced in RFC5661 18.35.3,
and will allow clients to return state to the server using the
machine credentials.
The biggest part of the problem is that we need to allow the client
to send a compound op with integrity/privacy on mounts that don't
have it enabled.
Add server support for properly decoding and using spo_must_enforce
and spo_must_allow bits. Add support for machine credentials to be
used for CLOSE, OPEN_DOWNGRADE, LOCKU, DELEGRETURN,
and TEST/FREE STATEID.
Implement a check so as to not throw WRONGSEC errors when these
operations are used if integrity/privacy isn't turned on.
Without this, Linux clients with credentials that expired while holding
delegations were getting stuck in an endless loop.
Signed-off-by: Andrew Elble <aweits@rit.edu>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It used to be the case that state had an rwlock that was locked for write
by downgrades, but for read for upgrades (opens). Well, the problem is
if there are two competing opens for the same state, they step on
each other toes potentially leading to leaking file descriptors
from the state structure, since access mode is a bitmap only set once.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move the existing static function to an inline helper, and call it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
kerberized NFSv4.1 mounts, and Scott Mayhew's work addressing ACK storms
that can affect some high-availability NFS setups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=G7V3
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.5' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Smaller bugfixes and cleanup, including a fix for a failures of
kerberized NFSv4.1 mounts, and Scott Mayhew's work addressing ACK
storms that can affect some high-availability NFS setups"
* tag 'nfsd-4.5' of git://linux-nfs.org/~bfields/linux:
nfsd: add new io class tracepoint
nfsd: give up on CB_LAYOUTRECALLs after two lease periods
nfsd: Fix nfsd leaks sunrpc module references
lockd: constify nlmsvc_binding structure
lockd: use to_delayed_work
nfsd: use to_delayed_work
Revert "svcrdma: Do not send XDR roundup bytes for a write chunk"
lockd: Register callbacks on the inetaddr_chain and inet6addr_chain
nfsd: Register callbacks on the inetaddr_chain and inet6addr_chain
sunrpc: Add a function to close temporary transports immediately
nfsd: don't base cl_cb_status on stale information
nfsd4: fix gss-proxy 4.1 mounts for some AD principals
nfsd: fix unlikely NULL deref in mach_creds_match
nfsd: minor consolidation of mach_cred handling code
nfsd: helper for dup of possibly NULL string
svcrpc: move some initialization to common code
nfsd: fix a warning message
nfsd: constify nfsd4_callback_ops structure
nfsd: recover: constify nfsd4_client_tracking_ops structures
svcrdma: Do not send XDR roundup bytes for a write chunk
This will be needed so COPY can look up the saved_fh in addition to the
current_fh.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The nfsd4_callback_ops structure is never modified, so declare it as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Bruce points out that the increment of the seqid in stateids is not
serialized in any way, so it's possible for racing calls to bump it
twice and end up sending the same stateid. While we don't have any
reports of this problem it _is_ theoretically possible, and could lead
to spurious state recovery by the client.
In the current code, update_stateid is always followed by a memcpy of
that stateid, so we can combine the two operations. For better
atomicity, we add a spinlock to the nfs4_stid and hold that when bumping
the seqid and copying the stateid.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In order to allow the client to make a sane determination of what
happened with racing LAYOUTGET/LAYOUTRETURN/CB_LAYOUTRECALL calls, we
must ensure that the seqids return accurately represent the order of
operations. The simplest way to do that is to ensure that operations on
a single stateid are serialized.
This patch adds a mutex to the layout stateid, and locks it when
checking the layout stateid's seqid. The mutex is held over the entire
operation and released after the seqid is bumped.
Note that in the case of CB_LAYOUTRECALL we must move the increment of
the seqid and setting into a new cb "prepare" operation. The lease
infrastructure will call the lm_break callback with a spinlock held, so
and we can't take the mutex in that codepath.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Andrew was seeing a race occur when an OPEN and OPEN_DOWNGRADE were
running in parallel. The server would receive the OPEN_DOWNGRADE first
and check its seqid, but then an OPEN would race in and bump it. The
OPEN_DOWNGRADE would then complete and bump the seqid again. The result
was that the OPEN_DOWNGRADE would be applied after the OPEN, even though
it should have been rejected since the seqid changed.
The only recourse we have here I think is to serialize operations that
bump the seqid in a stateid, particularly when we're given a seqid in
the call. To address this, we add a new rw_semaphore to the
nfs4_ol_stateid struct. We do a down_write prior to checking the seqid
after looking up the stateid to ensure that nothing else is going to
bump it while we're operating on it.
In the case of OPEN, we do a down_read, as the call doesn't contain a
seqid. Those can run in parallel -- we just need to serialize them when
there is a concurrent OPEN_DOWNGRADE or CLOSE.
LOCK and LOCKU however always take the write lock as there is no
opportunity for parallelizing those.
Reported-and-Tested-by: Andrew W Elble <aweits@rit.edu>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
According to Christoph's advice, this patch introduce a new helper
nfsd4_cb_sequence_done() for processing more callback errors, following
the example of the client's nfs41_sequence_done().
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch changes nfs4_preprocess_stateid_op so it always returns
a valid struct file if it has been asked for that. For that we
now allocate a temporary struct file for special stateids, and check
permissions if we got the file structure from the stateid. This
ensures that all callers will get their handling of special stateids
right, and avoids code duplication.
There is a little wart in here because the read code needs to know
if we allocated a file structure so that it can copy around the
read-ahead parameters. In the long run we should probably aim to
cache full file structures used with special stateids instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When testing pnfs layout, nfsd got error NFS4ERR_SEQ_MISORDERED.
It is caused by nfs return NFS4ERR_DELAY before validate_seqid(),
don't update the sequnce id, but nfsd updates the sequnce id !!!
According to RFC5661 20.9.3,
" If CB_SEQUENCE returns an error, then the state of the slot
(sequence ID, cached reply) MUST NOT change. "
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Checking the rpc_client pointer is not a reliable way to detect
backchannel changes: cl_cb_client is changed only after shutting down
the rpc client, so the condition cl_cb_client = tk_client will always be
true.
Check the RPC_TASK_KILLED flag instead, and rewrite the code to avoid
the buggy cl_callbacks list and fix the lifetime rules due to double
calls of the ->prepare callback operations method for this retry case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We must only increment the sequence id if the client has seen and responded
to a request. If we failed to deliver it to the client we must resend with
the same sequence id. So just like the client track errors at the transport
level differently from those returned in the XDR.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For the sake of forgetful clients, the server should return the layouts
to the file system on 'last close' of a file (assuming that there are no
delegations outstanding to that particular client) or on delegreturn
(assuming that there are no opens on a file from that particular
client).
In theory the information is all there in current data structures, but
it's not efficiently available; nfs4_file->fi_ref includes references on
the file across all clients, but we need a per-(client, file) count.
Walking through lots of stateid's to calculate this on each close or
delegreturn would be painful.
This patch introduces infrastructure to maintain per-client opens and
delegation counters on a per-file basis.
[hch: ported to the mainline pNFS support, merged various fixes from Jeff]
Signed-off-by: Sachin Bhamare <sachin.bhamare@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add support to issue layout recalls to clients. For now we only support
full-file recalls to get a simple and stable implementation. This allows
to embedd a nfsd4_callback structure in the layout_state and thus avoid
any memory allocations under spinlocks during a recall. For normal
use cases that do not intent to share a single file between multiple
clients this implementation is fully sufficient.
To ensure layouts are recalled on local filesystem access each layout
state registers a new FL_LAYOUT lease with the kernel file locking code,
which filesystems that support pNFS exports that require recalls need
to break on conflicting access patterns.
The XDR code is based on the old pNFS server implementation by
Andy Adamson, Benny Halevy, Boaz Harrosh, Dean Hildebrand, Fred Isaman,
Marc Eshel, Mike Sager and Ricardo Labiaga.
Signed-off-by: Christoph Hellwig <hch@lst.de>
