Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ defines to the UAPI
as a convenience.
Ideally the DRM_ROTATE_ and DRM_REFLECT_ property ids are looked up
through the atomic API, but realizing that userspace is likely to take
shortcuts and assume that the enum values are what is sent over the
wire.
As a result these defines are provided purely as a convenience to
userspace applications.
Changes since v3:
- Switched away from past tense in comments
- Add define name change to previously mis-spelled DRM_REFLECT_X comment
- Improved the comment for the DRM_MODE_REFLECT_<axis> comment
Changes since v2:
- Changed define prefix from DRM_MODE_PROP_ to DRM_MODE_
- Fix compilation errors
- Changed comment formatting
- Deduplicated comment lines
- Clarified DRM_MODE_PROP_REFLECT_ comment
Changes since v1:
- Moved defines from drm.h to drm_mode.h
- Changed define prefix from DRM_ to DRM_MODE_PROP_
- Updated uses of the defines to the new prefix
- Removed include from drm_rect.c
- Stopped using the BIT() macro
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170519205017.23307-2-robert.foss@collabora.com
Surprisingly a lot of legacy drivers roll their own, for
runtime pm and because vmwgfx.
Also make nouveau's set_config static while at it.
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-19-daniel.vetter@ffwll.ch
Nouveau had a few direct calls to ->disable_plane, I replaced those
with drm_plane_force_disable. Same story for shmob.
Otherwise no code changes.
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-5-daniel.vetter@ffwll.ch
Just rolling it out, no code change here.
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-3-daniel.vetter@ffwll.ch
This function becomes a lot simpler when having passed both the old and
new state to it. Looking at all callers, it seems that old_plane_state
is never NULL so the check can be dropped.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487256430-7625-3-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Currently the functions that initialize and tear down a connector
iterator use the _get() and _put() suffixes. However, these suffixes
are typically used by reference counting functions.
Make these function names a little more consistent by changing the
suffixes to _begin() and _end(), which is a fairly common pattern in
the rest of the Linux kernel.
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170228144643.5668-8-thierry.reding@gmail.com
Despite the documentation claim that cleanup_fb will match prior calls
to prepare_fb, in case of NULL framebuffers in the transitional helpers,
the code will skip the call to prepare_fb but not the corresponding
cleanup_fb call. This asymmetry in semantics is unnecessarily surprising
for developers transitioning drivers to atomic model, specially because
the final atomic handlers don't have the issue - the prepare_fb is
always called, despite the new state framebuffer being null.
The only current user of the transitional helper that doesn't take care
of null framebuffers explicitly inside the prepare_fb hook is
atmel_hlcdc, so we take special care to make sure we don't break
anything there.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170216164442.28704-1-krisman@collabora.co.uk
I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).
Also some minor drive-by polish where it makes sense, I read a lot
of docs ...
v2: Comments from Gustavo.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Rewiewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-2-daniel.vetter@ffwll.ch
sed -e 's/\( \* .*\)struct &\([_a-z]*\)/\1\&struct \2/' -i
Originally I wasnt a friend of this style because I thought a
line-break between the "&struct" and "foo" part would break it. But a
quick test shows that " * &struct \n * foo\n" works pefectly well with
current kernel-doc. So time to mass-apply these changes!
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-6-git-send-email-daniel.vetter@ffwll.ch
Mostly nothing special (except making sure that really all error paths
and friends call iter_put).
v2: Don't forget the raw connector_list walking in
drm_helper_move_panel_connectors_to_head. That one unfortunately can't
be converted to the iterator helpers, but since it's just some list
splicing best to just wrap the entire thing up in one critical
section.
v3: Bail out after iter_put (Harry).
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161215155843.13408-1-daniel.vetter@ffwll.ch
<drm/drm_crtc.h> used to define most of the in-kernel KMS API. It has
now been split into separate files for each object type, but still
includes most other KMS headers to avoid breaking driver compilation.
As a step towards fixing that problem, remove the inclusion of
<drm/drm_encoder.h> from <drm/drm_crtc.h> and include it instead where
appropriate. Also remove the forward declarations of the drm_encoder and
drm_encoder_helper_funcs structures from <drm/drm_crtc.h> as they're not
needed in the header.
<drm/drm_encoder.h> now has to include <drm/drm_mode.h> and contain a
forward declaration of struct drm_encoder in order to allow including it
as the first header in a compilation unit.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sinclair Yeh <syeh@vmware.com> # For vmwgfx
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
[seanpaul resolved conflict in drm_plane.h]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
While reviewing docs I spotted that we have a few functions that
really just don't fit into their containing helper library section.
Extract them and shovel them all into a new library for random one-off
aux stuff.
v2: Remove wrongly added files for real.
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-3-git-send-email-daniel.vetter@ffwll.ch
Add a version of drm_plane_helper_check_update() which takes a plane
state instead of having the caller pass in everything.
And to reduce code duplication, let's reimplement
drm_plane_helper_check_update() in terms of the new function, by
having a tempororary plane state on the stack.
v2: Add a note that the functions modifies the state (Chris)
v3: Fix drm_plane_helper_check_update() y coordinates (Daniel Kurtz)
Cc: Daniel Kurtz <djkurtz@chromium.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org> (v2)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1470642910-14073-1-git-send-email-ville.syrjala@linux.intel.com
drm_plane_helper_check_update() needs to account for the plane rotation
for correct clipping/scaling calculations. Do so.
There was an earlier attempt [1] to add this into
intel_check_primary_plane() but I requested that it'd be put into the
helper instead. An updated patch never materialized AFAICS, so I went
ahead and cooked one up myself.
v2: Deal with new drm_plane_helper_check_update() callers
[1] https://patchwork.freedesktop.org/patch/65177/
Cc: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466172790-10025-1-git-send-email-ville.syrjala@linux.intel.com
Mostly this is unexpected indents. But really it's just a
demonstration for my patch, all these issues have been found&fixed
using the correct source file and line number support I just added.
All line numbers have been perfectly accurate.
One issue looked a bit fishy in intel_lrc.c, where I don't quite grok
what sphinx is unhappy about. But since that file looks like it has
never seen a proper kernel-doc parser I figured better to fix in a
separate path.
v2: Use fancy new &drm_device->struct_mutex linking (Jani).
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: linux-doc@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Done with coccinelle for the most part. It choked on
msm/mdp/mdp5/mdp5_plane.c like so:
"BAD:!!!!! enum drm_plane_type type;"
No idea how to deal with that, so I just fixed that up
by hand.
Also it thinks '...' is part of the semantic patch, so I put an
'int DOTDOTDOT' placeholder in its place and got rid of it with
sed afterwards.
I didn't convert drm_plane_init() since passing the varargs through
would mean either cpp macros or va_list, and I figured we don't
care about these legacy functions enough to warrant the extra pain.
@@
typedef uint32_t;
identifier dev, plane, possible_crtcs, funcs, formats, format_count, type;
@@
int drm_universal_plane_init(struct drm_device *dev,
struct drm_plane *plane,
unsigned long possible_crtcs,
const struct drm_plane_funcs *funcs,
const uint32_t *formats,
unsigned int format_count,
enum drm_plane_type type
+ ,const char *name, int DOTDOTDOT
)
{ ... }
@@
identifier dev, plane, possible_crtcs, funcs, formats, format_count, type;
@@
int drm_universal_plane_init(struct drm_device *dev,
struct drm_plane *plane,
unsigned long possible_crtcs,
const struct drm_plane_funcs *funcs,
const uint32_t *formats,
unsigned int format_count,
enum drm_plane_type type
+ ,const char *name, int DOTDOTDOT
);
@@
expression E1, E2, E3, E4, E5, E6, E7;
@@
drm_universal_plane_init(E1, E2, E3, E4, E5, E6, E7
+ ,NULL
)
v2: Split crtc and plane changes apart
Pass NUL for no-name instead of ""
Leave drm_plane_init() alone
v3: Add ', or NULL...' to @name kernel doc (Jani)
Annotate the function with __printf() attribute (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449670795-2853-1-git-send-email-ville.syrjala@linux.intel.com
Done with coccinelle for the most part. However, it thinks '...' is
part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder
in its place and got rid of it with sed afterwards.
I didn't convert drm_crtc_init() since passing the varargs through
would mean either cpp macros or va_list, and I figured we don't
care about these legacy functions enough to warrant the extra pain.
@@
identifier dev, crtc, primary, cursor, funcs;
@@
int drm_crtc_init_with_planes(struct drm_device *dev,
struct drm_crtc *crtc,
struct drm_plane *primary, struct drm_plane *cursor,
const struct drm_crtc_funcs *funcs
+ ,const char *name, int DOTDOTDOT
)
{ ... }
@@
identifier dev, crtc, primary, cursor, funcs;
@@
int drm_crtc_init_with_planes(struct drm_device *dev,
struct drm_crtc *crtc,
struct drm_plane *primary, struct drm_plane *cursor,
const struct drm_crtc_funcs *funcs
+ ,const char *name, int DOTDOTDOT
);
@@
expression E1, E2, E3, E4, E5;
@@
drm_crtc_init_with_planes(E1, E2, E3, E4, E5
+ ,NULL
)
v2: Split crtc and plane changes apart
Pass NULL for no-name instead of ""
Leave drm_crtc_init() alone
v3: Add ', or NULL...' to @name kernel doc (Jani)
Annotate the function with __printf() attribute (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449670771-2751-1-git-send-email-ville.syrjala@linux.intel.com
Currently we have 4 helper libraries (probe, crtc, plane & atomic)
that all use the same helper vtables. And that's by necessity since we
don't want to litter the core structs with one ops pointer per helper
library. Also often the reuse the same hooks (like atomic does, to
facilite conversion from existing drivers using crtc and plane
helpers).
Given all that it doesn't make sense to put the docs for these next to
specific helpers. Instead extract them into a new header file and
section in the docbook, and add references to them everywhere.
Unfortunately kernel-doc complains when an include directive doesn't
find anything (and it does by dumping crap into the output file). We
have to remove the now empty includes to avoid that, instead of leaving
them in for future proofing.
v2: More OCD in ordering functions.
v3: Spelling plus collate copyright headers properly.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449218769-16577-4-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: Thierry Reding <treding@nvidia.com>
To aid in debugging failures, print the src,dst,clip rectangles
when drm_plane_helper_check_update() fails.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This removes the need to separately track fb changes i915.
That will be done as a separate commit, however.
Changes since v1:
- Add dri-devel to cc.
- Fix a check in intel's prepare and cleanup fb to take rotation
into account.
Changes since v2:
- Split out i915 changes to a separate commit.
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
[danvet: Squash in msm fixup from Maarten.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In intel it's useful to keep track of some state changes with old
crtc state vs new state, for example to disable initial planes or
when a modeset's prevented during fastboot.
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
[danvet: squash in fixup for exynos provided by Maarten.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
connector hotplug locking cleanup and fixes to make it save against
atomic. Note that because of depencies this is based on top of the
drm-intel-next pull, so that one needs to go in before this one.
I've also thrown in the mode_group removal on top since it's defunct,
never worked really, no one seems to care and the code can be resurrected
easily.
* tag 'topic/connector-locking-2015-07-23' of git://anongit.freedesktop.org/drm-intel:
drm: gc now dead mode_group code
drm: Stop filtering according to mode_group in getresources
drm: Roll out drm_for_each_{plane,crtc,encoder}
drm/cma-helper: Fix locking in drm_fb_cma_debugfs_show
drm: Roll out drm_for_each_connector more
drm: Amend connector list locking rules
drm/radeon: Take all modeset locks for DP MST hotplug
drm/i915: Take all modeset locks for DP MST hotplug
drm: Check locking in drm_for_each_fb
drm/i915: Use drm_for_each_fb in i915_debugfs.c
drm: Check locking in drm_for_each_connector
drm/fbdev-helper: Grab mode_config.mutex in drm_fb_helper_single_add_all_connectors
drm/probe-helper: Grab mode_config.mutex in poll_init/enable
drm: Add modeset object iterators
drm: Simplify drm_for_each_legacy_plane arguments
Now that we also grab the connection_mutex and so fixed the race with
atomic modeset we can use the iterator there too.
The other special case is drm_connector_unplug_all which would have a
locking inversion with the sysfs store/show functions if we'd grab the
mode_config.mutex around the unplug. We could just grab
connection_mutex instead, but that's a bit too much a dirty trick for
my taste. Also it's only used by udl, which doesn't do any other kind
of connector hotplugging, so should be race-free. Hence just stick
with a comment for now.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Transitional drivers might not have all the state frobbing lined up
yet. But since the initial code has been merged a lot more state was
added, so we really need this.
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reported-and-tested-by: John Hunter <zhaojunwang@pku.edu.cn>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In
commit f02ad907cd
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jan 22 16:36:23 2015 +0100
drm/atomic-helpers: Recover full cursor plane behaviour
we've added a hack to atomic helpers to never to vblank waits for
cursor updates through the legacy apis since that's what X expects.
Unfortunately we've (again) forgotten to adjust the transitional
helpers. Do this now.
This fixes regressions for drivers only partially converted over to
atomic (like i915).
Reported-by: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
I somehow manage to screw up applying Laurent's patch in eca93e28c256:
"drm: Check in setcrtc if the primary plane supports the fb pixel
format". It was a conflict with
commit 3461b30b3e
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Mar 5 10:32:44 2015 +0100
drm/plane-helper: unexport drm_primary_helper_create_plane
and I just didn't check that the solution from wiggle made sense.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: laurent.pinchart@ideasonboard.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: laurent.pinchart@ideasonboard.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Drivers implementing the universal planes API report the list of
supported pixel formats for the primary plane. Make sure the fb passed
to the setcrtc ioctl is compatible.
Drivers not implementing the universal planes API will have no format
reported for the primary plane, skip the check in that case.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We shouldn't tempt driver writers into using this since it uses a
default format list which is likely wrong. And when that's done we can
simplify the code a bit, too.
Noticed while reviewing a patch from Laurent.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Use cases like rotation require these hooks to have some context so they
know how to prepare and cleanup the frame buffer correctly.
For i915 specifically, object backing pages need to be mapped differently
for different rotation modes and the driver needs to know which mapping to
instantiate and which to tear down when transitioning between them.
v2: Made passed in states const. (Daniel Vetter)
[airlied: add mdp5 and atmel fixups]
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to prevent drivers from having to perform the same checks over
and over again, add an optional ->atomic_disable callback which the core
calls under the right circumstances.
v2: pass old state and detect edges to avoid calling ->atomic_disable on
already disabled planes, remove redundant comment (Daniel Vetter)
v3: rename helper to drm_atomic_plane_disabling() to clarify that it is
checking for transitions, move helper to drm_atomic_helper.h, clarify
check for !old_state and its relation to transitional helpers
Here's an extract from some discussion rationalizing the behaviour (for
a full version, see the reference below):
> > Hm, thinking about this some more this will result in a slight difference
> > in behaviour, at least when drivers just use the helper ->reset functions
> > but don't disable everything:
> > - With transitional helpers we assume we know nothing and call
> > ->atomic_disable.
> > - With atomic old_state->crtc == NULL in the same situation right after
> > boot-up, but we asssume the plane is really off and _dont_ call
> > ->atomic_disable.
> >
> > Should we instead check for (old_state && old_state->crtc) and state that
> > drivers need to make sure they don't have stuff hanging around?
>
> I don't think we can check for old_state because otherwise this will
> always return false, whereas we really want it to force-disable planes
> that could be on (lacking any more accurate information). For
> transitional helpers anyway.
>
> For the atomic helpers, old_state will never be NULL, but I'd assume
> that the driver would reconstruct the current state in ->reset().
By the way, the reason for why old_state can be NULL with transitional
helpers is the ordering of the steps in the atomic transition. Currently
the Tegra patches do this (based on your blog post and the Exynos proto-
type):
1) atomic conversion, phase 1:
- implement ->atomic_{check,update,disable}()
- use drm_plane_helper_{update,disable}()
2) atomic conversion, phase 2:
- call drm_mode_config_reset() from ->load()
- implement ->reset()
That's only a partial list of what's done in these steps, but that's the
only relevant pieces for why old_state is NULL.
What happens is that without ->reset() implemented there won't be any
initial state, hence plane->state (the old_state here) will be NULL the
first time atomic state is applied.
We could of course reorder the sequence such that drivers are required
to hook up ->reset() before they can (or at the same as they) hook up
the transitional helpers. We could add an appropriate WARN_ON to this
helper to make that more obvious.
However, that will not solve the problem because it only gets rid of the
special case. We still don't know whether old_state->crtc == NULL is the
current state or just the initial default.
So no matter which way we do this, I don't see a way to get away without
requiring specific semantics from drivers. They would be that:
- drivers recreate the correct state in ->reset() so that
old_state->crtc != NULL if the plane is really enabled
or
- drivers have to ensure that the real state in fact mirrors the
initial default as encoded in the state (plane disabled)
References: http://lists.freedesktop.org/archives/dri-devel/2015-January/075578.html
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
drm_plane_helper_{update,disable} are not specific to primary planes;
fix some copy/paste summaries to avoid confusion.
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When commiting a plane update where the framebuffer doesn't change, we
can skip the prepare_fb/cleanup_fb steps. This also allows us to avoid
an unnecessary vblank wait at the end of the operation when we're just
moving a plane and not changing its image (e.g., for a cursor).
At the moment, i915 is the only upstream driver using the transitional
plane helpers, and thus the only driver affected by this change.
Note that this replicates a corresponding change in the atomic helpers
implemented in
commit ab58e3384b
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Nov 24 20:42:42 2014 +0100
drm/atomic-helper: Skip vblank waits for unchanged fbs
Reported-by: Jeremiah Mahler <jmmahler@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88540
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Backmerge my drm-misc branch because of conflicts. Just simple stuff
but better to clear this out before I merge the other atomic patches.
Conflicts:
drivers/gpu/drm/drm_crtc.c
drivers/gpu/drm/drm_edid.c
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Useful since this way we can pass around just the state objects and
will get ther real object, too.
Specifically this allows us to again simplify the parameters for
set_crtc_for_plane.
v2: msm already has it's own specific plane_reset hook, don't forget
that one!
v3: Fixup kerneldoc, reported by 0-day builder.
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com> (v2)
Tested-by: Rob Clark <robdclark@gmail.com> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
drm_plane_helper_check_update() currently uses crtc before testing whether
we're disabling the plane (fb == NULL). Move the fb test before the first crtc
usage so that crtc == NULL doesn't have to be handled by the caller.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In most situations it will be useful to have the old state passed to the
->atomic_update() callback. For example if a plane is being disabled the
new state's .crtc field will be NULL, but some drivers may rely on this
field to program the CRTCs registers.
v2: rename variable to old_plane_state and remove redundant comment as
suggested by Daniel Vetter, remove an Exynos hunk that doesn't apply to
drm-next and add a hunk for pending MSM mdp5 changes
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Backmerge drm-next so that I can keep merging patches. Specifically I
want:
- atomic stuff, yay!
- eld parsing patch from Jani.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
So my original plan was that the drm core refcounts framebuffers like
with the legacy ioctls. But that doesn't work for a bunch of reasons:
- State objects might live longer than until the next fb change
happens for a plane. For example delayed cleanup work only happens
_after_ the pageflip ioctl has completed. So this definitely doesn't
work without the plane state holding its own references.
- The other issue is transition from legacy to atomic implementations,
where the driver works under a mix of both worlds. Which means
legacy paths might not properly update the ->fb pointer under
plane->state->fb. Which is a bit a problem when then someone comes
around and _does_ try to clean it up when it's long gone.
The second issue is just a bit a transition bug, since drivers should
update plane->state->fb in all the paths that aren't converted yet.
But a bit more robustness for the transition can't hurt - we pull
similar tricks with cleaning up the old fb in the transitional helpers
already.
The pattern for drivers that transition is
if (plane->state)
drm_atomic_set_fb_for_plane(plane->state, plane->fb);
inserted after the fb update has logically completed at the end of
->set_config (or ->set_base/mode_set if using the crtc helpers),
->page_flip, ->update_plane or any other entry point which updates
plane->fb.
v2: Update kerneldoc - copypasta fail.
v3: Fix spelling in the commit message (Sean).
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
In all cases the text requires that new drivers are converted to the
atomic interfaces.
v2: Add overview for state handling.
v3: Review from Sean: Some spelling fixes and drop the misguided
hunk to remove rgba8888 from the plane helpers compat list.
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
These two functions allow drivers to reuse their atomic plane helpers
functions for the primary plane to implement the interfaces required
by the crtc helpers for the legacy ->set_config callback.
This is purely transitional and won't be used once the driver is fully
converted. But it allows partial conversions to the atomic plane
helpers which are functional.
v2:
- Use ->atomic_duplicate_state if available.
- Don't forget to run crtc_funcs->atomic_check.
v3: Shift source coordinates correctly for 16.16 fixed point.
v4: Don't forget to call ->atomic_destroy_state if available.
v5: Fixup kerneldoc.
v6: Reuse the plane_commit function from the transitional plane
helpers to avoid too much duplication.
v7:
- Remove some stale comment.
- Correctly handle the lack of plane->state object, necessary for
transitional use.
v8: Fixup an embarrassing h/vdisplay mixup.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Converting a driver to the atomic interface can be a daunting
undertaking. One of the prerequisites is to have full universal planes
support.
To make that transition a bit easier this patch provides plane helpers
which use the new atomic helper callbacks just only for the plane
changes. This way the plane update functionality can be tested without
being forced to convert everything at once.
Of course a real atomic update capable driver will implement the
all plane properties through the atomic interface, so these helpers
are mostly transitional. But they can be used to enable proper
universal plane support, especially once the crtc helpers have also
been adapted.
v2: Use ->atomic_duplicate_state if available.
v3: Don't forget to call ->atomic_destroy_state if available.
v4: Fixup kerneldoc, reported by Paulo.
v5: Extract a common plane_commit helper and fix some bugs in the
plane_state setup of the plane_disable implementation.
v6: Fix issues with the cleanup of the old fb. Since transitional
helpers can be mixed we need to assume that the old fb has been set up
by a legacy path (e.g. set_config or page_flip when the primary plane
is converted to use these functions already). Hence pass an additional
old_fb parameter to plane_commit to do that cleanup work correctly.
v7:
- Fix spurious WARNING (crtc helpers really love to disable stuff
harder) and fix array index bonghits.
- Correctly handle the lack of plane->state object, necessary for
transitional use.
- Don't indicate failure if drm_vblank_get doesn't work - that's
expected when the pipe is in dpms off mode.
v8: Review from Sean:
- s/fail/out/ to make the meaning of a label more clear.
- spelling fix in the commit message.
Cc: Paulo Zanoni <przanoni@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We can't let visible set true while the fb is null, some places of
the code only check for visible to base its decisions.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm_plane_init() (the legacy plane initialization function) takes a bool
as its final parameter; originally this indicated whether a plane was
'private' to the driver (before the DRM core understood non-overlay
planes), now it indicates whether the plane is a primary plane (private
planes were used by some drivers to represent primary planes
internally). The newer drm_universal_plane_init() take an 'enum
drm_plane_type' as its final parameter to allow the caller to specify
the specific plane type desired (primary, cursor, or overlay).
Due to a rebasing mistake, the primary plane helper is currently passing
DRM_PLANE_TYPE_PRIMARY (enum value = 1) for drm_plane_init()'s boolean
'is_primary' parameter. This winds up giving the correct behavior since
DRM_PLANE_TYPE_PRIMARY evaluates as true, but is confusing to anyone
reading the code since we're passing an enum value (one of three
possible values) for a boolean parameter.
Replace the primary plane helper's call to drm_plane_init() with
drm_universal_plane_init() so that the parameter and value types match
up as expected.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
