Commit Graph

24 Commits

Author SHA1 Message Date
Madhavan Srinivasan
27593d72c4 powerpc/perf: Use MSR to report privilege level on P9 DD1
SIER and SIAR are not updated correctly for some samples, so force the
use of MSR and regs->nip instead for misc_flag updates. This is done by
adding a new ppmu flag and updating the use_siar logic in
perf_read_regs() to use it, and dropping the PPMU_HAS_SIER flag.

Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Rename flag to PPMU_NO_SIAR, and also drop PPMU_HAS_SIER]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-18 16:15:58 +11:00
Sukadev Bhattiprolu
e0728b50d4 powerpc/perf: Export Power8 generic and cache events to sysfs
Power8 supports a large number of events in each susbystem so when a
user runs:

	perf stat -e branch-instructions sleep 1
	perf stat -e L1-dcache-loads sleep 1

it is not clear as to which PMU events were monitored.

Export the generic hardware and cache perf events for Power8 to sysfs,
so users can precisely determine the PMU event monitored by the generic
event.

Eg:
	cat /sys/bus/event_source/devices/cpu/events/branch-instructions
	event=0x10068

	$ cat /sys/bus/event_source/devices/cpu/events/L1-dcache-loads
	event=0x100ee

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-10 22:56:05 +11:00
Sukadev Bhattiprolu
d4969e2459 powerpc/perf: Remove PME_ prefix for power7 events
We used the PME_ prefix earlier to avoid some macro/variable name
collisions.  We have since changed the way we define/use the event
macros so we no longer need the prefix.

By dropping the prefix, we keep the the event macros consistent with
their official names.

Reported-by: Michael Ellerman <ellerman@au1.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-10 22:56:04 +11:00
Michael Ellerman
8abd818fc7 powerpc/perf: Pass the struct perf_events down to compute_mmcr()
To support per-event exclude settings on Power8 we need access to the
struct perf_events in compute_mmcr().

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28 14:30:47 +10:00
Joel Stanley
4d9690dd56 powerpc/perf: Add PPMU_ARCH_207S define
Instead of separate bits for every POWER8 PMU feature, have a single one
for v2.07 of the architecture.

This saves us adding a MMCR2 define for a future patch.

Cc: stable@vger.kernel.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-11 12:55:07 +10:00
Anshuman Khandual
5f6d0380c6 powerpc/perf: Define perf_event_print_debug() to print PMU register values
Currently the sysrq ShowRegs command does not print any PMU registers as
we have an empty definition for perf_event_print_debug(). This patch
defines perf_event_print_debug() to print various PMU registers.

Example output:

CPU: 0 PMU registers, ppmu = POWER7 n_counters = 6
PMC1:  00000000 PMC2: 00000000 PMC3: 00000000 PMC4: 00000000
PMC5:  00000000 PMC6: 00000000 PMC7: deadbeef PMC8: deadbeef
MMCR0: 0000000080000000 MMCR1: 0000000000000000 MMCRA: 0f00000001000000
SIAR:  0000000000000000 SDAR:  0000000000000000 SIER:  0000000000000000

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
[mpe: Fix 32 bit build and rework formatting for compactness]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-24 09:48:23 +11:00
Ingo Molnar
c9572f010d Linux 3.11-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJSCDSjAAoJEHm+PkMAQRiGDXMIAI7Loae0Oqb1eoeJkvjyZsBS
 OJDeeEcn+k58VbxVHyRdc7hGo4yI4tUZm172SpnOaM8sZ/ehPU7zBrwJK2lzX334
 /jAM3uvVPfxA2nu0I4paNpkED/NQ8NRRsYE1iTE8dzHXOH6dA3mgp5qfco50rQvx
 rvseXpME4KIAJEq4jnyFZF5+nuHiPueM9JftPmSSmJJ3/KY9kY1LESovyWd7ttg1
 jYSVPFal9J0E+tl2UQY5g9H16GqhhjYn+39Iei6Q5P4bL4ZubQgTRQTN9nyDc06Z
 ezQtGoqZ8kEz/2SyRlkda6PzjSEhgXlc8mCL5J7AW+dMhTHHx2IrosjiCA80kG8=
 =c0rK
 -----END PGP SIGNATURE-----

Merge tag 'v3.11-rc5' into perf/core

Merge Linux 3.11-rc5, to sync up with the latest upstream fixes since -rc1.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-08-15 10:00:09 +02:00
Michael Ellerman
8d7c55d01e powerpc/perf: Export PERF_EVENT_CONFIG_EBB_SHIFT to userspace
We use bit 63 of the event code for userspace to request that the event
be counted using EBB (Event Based Branches). Export this value, making
it part of the API - though only on processors that support EBB.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-01 13:11:46 +10:00
Ingo Molnar
5a9821321e perf/core improvements and fixes:
. Add missing 'finished_round' event forwarding in 'perf inject', from Adrian Hunter.
 
 . Assorted tidy ups, from Adrian Hunter.
 
 . Fall back to sysfs event names when parsing fails, from Andi Kleen.
 
 . List pmu events in perf list, from Andi Kleen.
 
 . Cleanup some memory allocation/freeing uses, from David Ahern.
 
 . Add option to collapse undesired parts of call graph, from Greg Price.
 
 . Prep work for multi perf data file storage, from Jiri Olsa.
 
 . Add support for more than two files comparision in 'perf diff', from Jiri Olsa
 
 . A few more 'perf test' improvements, from Jiri Olsa
 
 . libtraceevent cleanups, from Namhyung Kim.
 
 . Remove odd build stall in 'perf sched' by moving a large struct initialization
   from a local variable to a global one, from Namhyung Kim.
 
 . Add support for callchains in the gtk UI, from Namhyung Kim.
 
 . Do not apply symfs for an absolute vmlinux path, fix from Namhyung Kim.
 
 . Use default include path notation for libtraceevent, from Robert Richter.
 
 . Fix 'make tools/perf', from Robert Richter.
 
 . Make Power7 events available, from Runzhen Wang.
 
 . Add --objdump option to 'perf top', from Sukadev Bhattiprolu.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJR6EOuAAoJENZQFvNTUqpAqjEP/1Ist/eR9be8YhljMz8Yxl1o
 JXktgxSkMS/n59lRibUuGZrgPKPNxivK6AEbnbZxzZoHDBS8tnAAOXUuUVTtNCoT
 YsQurQjCmyXHIvYqwMaYarrhoIv33LdJyshskW3GZ81UfeeC6QoC56he3VTg1dEd
 k8snS4F8LJpBQizRJN6s959nF+pyw16wqiGYKJ80G1nhPTsStz8NSSWdCRVbyXl9
 fG0S/lLvUfilGT/ixHcvS62ENHiErL4N6jGNV4XeQqoADhrQvCwziDr+BORfJB9K
 udbO0PFS5uR4HOGNqZOPZfPxW8cTUXV9cCscLScKEVUghKz9rzHbPTTSDejXna/h
 cqLjRW1xpWUmIRY7Y5zSoBJIsh2t3vo4TkZoRNZxhCexoOT/qIUL6bWVZoxqaKzG
 xwL4DopOvb/DdUDkb+UB9+9kW4rDoMR1wUb6XXuGx8EqM8LHiA3TAPcGwmNh/IM6
 4maUhgyOFad3rm5mcjO7IoCU7NxoWR1dKsjGYteZeZv17X30UfRFwIIH+8l2Ma4o
 bpBQ4DKu07jXRUZXcUajOhj7cZO+UmE6c4YoAPpv+CQ1YKVH4/YHYf6RBWdjGLqV
 kqOrQuSopVztmaglrh93e+cYkfvNjZAC2EOzhx+UxcPqh9zh1Pil8LE1DwjChW5m
 /Y/NPH98nDvXY3N4vlLK
 =xk/v
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

 * Add missing 'finished_round' event forwarding in 'perf inject', from Adrian Hunter.

 * Assorted tidy ups, from Adrian Hunter.

 * Fall back to sysfs event names when parsing fails, from Andi Kleen.

 * List pmu events in perf list, from Andi Kleen.

 * Cleanup some memory allocation/freeing uses, from David Ahern.

 * Add option to collapse undesired parts of call graph, from Greg Price.

 * Prep work for multi perf data file storage, from Jiri Olsa.

 * Add support for more than two files comparision in 'perf diff', from Jiri Olsa

 * A few more 'perf test' improvements, from Jiri Olsa

 * libtraceevent cleanups, from Namhyung Kim.

 * Remove odd build stall in 'perf sched' by moving a large struct initialization
   from a local variable to a global one, from Namhyung Kim.

 * Add support for callchains in the gtk UI, from Namhyung Kim.

 * Do not apply symfs for an absolute vmlinux path, fix from Namhyung Kim.

 * Use default include path notation for libtraceevent, from Robert Richter.

 * Fix 'make tools/perf', from Robert Richter.

 * Make Power7 events available, from Runzhen Wang.

 * Add --objdump option to 'perf top', from Sukadev Bhattiprolu.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-19 09:35:30 +02:00
Runzhen Wang
cfe0d8ba14 perf tools: Make Power7 events available for perf
Power7 supports over 530 different perf events but only a small subset
of these can be specified by name, for the remaining events, we must
specify them by their raw code:

        perf stat -e r2003c <application>

This patch makes all the POWER7 events available in sysfs.  So we can
instead specify these as:

        perf stat -e 'cpu/PM_CMPLU_STALL_DFU/' <application>

where PM_CMPLU_STALL_DFU is the r2003c in previous example.

Before this patch is applied, the size of power7-pmu.o is:

$ size arch/powerpc/perf/power7-pmu.o
   text	   data	    bss	    dec	    hex	filename
   3073	   2720	      0	   5793	   16a1	arch/powerpc/perf/power7-pmu.o

and after the patch is applied, it is:

$ size arch/powerpc/perf/power7-pmu.o
   text	   data	    bss	    dec	    hex	filename
  15950	  31112	      0	  47062	   b7d6	arch/powerpc/perf/power7-pmu.o

For the run time overhead, I use two scripts, one is "event_name.sh",
which contains 50 event names, it looks like:

 # ./perf record  -e 'cpu/PM_CMPLU_STALL_DFU/' -e .....  /bin/sleep 1

the other one is named "event_code.sh" which use corresponding  events
raw
code instead of events names, it looks like:

 # ./perf record -e r2003c -e ......  /bin/sleep 1

below is the result.

Using events name:

[root@localhost perf]# time ./event_name.sh
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (~102 samples) ]

real	0m1.192s
user	0m0.028s
sys	0m0.106s

Using events raw code:

[root@localhost perf]# time ./event_code.sh
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.003 MB perf.data (~112 samples) ]

real	0m1.198s
user	0m0.028s
sys	0m0.105s

Signed-off-by: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Cc: icycoder@gmail.com
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Runzhen Wang <runzhew@clemson.edu>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1372407297-6996-3-git-send-email-runzhen@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-07-12 13:46:09 -03:00
Michael Ellerman
330a1eb777 powerpc/perf: Core EBB support for 64-bit book3s
Add support for EBB (Event Based Branches) on 64-bit book3s. See the
included documentation for more details.

EBBs are a feature which allows the hardware to branch directly to a
specified user space address when a PMU event overflows. This can be
used by programs for self-monitoring with no kernel involvement in the
inner loop.

Most of the logic is in the generic book3s code, primarily to avoid a
proliferation of PMU callbacks.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-01 11:50:10 +10:00
Anshuman Khandual
3925f46bb5 powerpc/perf: Enable branch stack sampling framework
Provides basic enablement for perf branch stack sampling framework on
POWER8 processor based platforms. Adds new BHRB related elements into
cpu_hw_event structure to represent current BHRB config, BHRB filter
configuration, manage context and to hold output BHRB buffer during
PMU interrupt before passing to the user space. This also enables
processing of BHRB data and converts them into generic perf branch
stack data format.

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-26 16:13:02 +10:00
Anshuman Khandual
5afc9b52a7 powerpc/perf: Add new BHRB related generic functions, data and flags
This patch adds couple of generic functions to power_pmu structure
which would configure the BHRB and it's filters. It also adds
representation of the number of BHRB entries present on the PMU.
A new PMU flag PPMU_BHRB would indicate presence of BHRB feature.

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-26 16:11:12 +10:00
Michael Ellerman
8f61aa325f powerpc/perf: Add support for SIER
On power8 we have a new SIER (Sampled Instruction Event Register), which
captures information about instructions when we have random sampling
enabled.

Add support for loading the SIER into pt_regs, overloading regs->dar.
Also set the new NO_SIPR flag in regs->result if we don't have SIPR.

Update regs_sihv/sipr() to look for SIPR/SIHV in SIER.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-26 16:11:10 +10:00
Michael Ellerman
7a7868326d powerpc/perf: Add an explict flag indicating presence of SLOT field
In perf_ip_adjust() we potentially use the MMCRA[SLOT] field to adjust
the reported IP of a sampled instruction.

Currently the logic is written so that if the backend does NOT have
the PPMU_ALT_SIPR flag set then we assume MMCRA[SLOT] exists.

However on power8 we do not want to set ALT_SIPR (it's in a third
location), and we also do not have MMCRA[SLOT].

So add a new flag which only indicates whether MMCRA[SLOT] exists.

Naively we'd set it on everything except power6/7, because they set
ALT_SIPR, and we've reversed the polarity of the flag. But it's more
complicated than that.

mpc7450 is 32-bit, and uses its own version of perf_ip_adjust()
which doesn't use MMCRA[SLOT], so it doesn't need the new flag set and
the behaviour is unchanged.

PPC970 (and I assume power4) don't have MMCRA[SLOT], so shouldn't have
the new flag set. This is a behaviour change on those cpus, though we
were probably getting lucky and the bits in question were 0.

power5 and power5+ set the new flag, behaviour unchanged.

power6 & power7 do not set the new flag, behaviour unchanged.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-26 16:11:07 +10:00
Linus Torvalds
9d3cae26ac Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Benjamin Herrenschmidt:
 "So from the depth of frozen Minnesota, here's the powerpc pull request
  for 3.9.  It has a few interesting highlights, in addition to the
  usual bunch of bug fixes, minor updates, embedded device tree updates
  and new boards:

   - Hand tuned asm implementation of SHA1 (by Paulus & Michael
     Ellerman)

   - Support for Doorbell interrupts on Power8 (kind of fast
     thread-thread IPIs) by Ian Munsie

   - Long overdue cleanup of the way we handle relocation of our open
     firmware trampoline (prom_init.c) on 64-bit by Anton Blanchard

   - Support for saving/restoring & context switching the PPR (Processor
     Priority Register) on server processors that support it.  This
     allows the kernel to preserve thread priorities established by
     userspace.  By Haren Myneni.

   - DAWR (new watchpoint facility) support on Power8 by Michael Neuling

   - Ability to change the DSCR (Data Stream Control Register) which
     controls cache prefetching on a running process via ptrace by
     Alexey Kardashevskiy

   - Support for context switching the TAR register on Power8 (new
     branch target register meant to be used by some new specific
     userspace perf event interrupt facility which is yet to be enabled)
     by Ian Munsie.

   - Improve preservation of the CFAR register (which captures the
     origin of a branch) on various exception conditions by Paulus.

   - Move the Bestcomm DMA driver from arch powerpc to drivers/dma where
     it belongs by Philippe De Muyter

   - Support for Transactional Memory on Power8 by Michael Neuling
     (based on original work by Matt Evans).  For those curious about
     the feature, the patch contains a pretty good description."

(See commit db8ff90702: "powerpc: Documentation for transactional
memory on powerpc" for the mentioned description added to the file
Documentation/powerpc/transactional_memory.txt)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (140 commits)
  powerpc/kexec: Disable hard IRQ before kexec
  powerpc/85xx: l2sram - Add compatible string for BSC9131 platform
  powerpc/85xx: bsc9131 - Correct typo in SDHC device node
  powerpc/e500/qemu-e500: enable coreint
  powerpc/mpic: allow coreint to be determined by MPIC version
  powerpc/fsl_pci: Store the pci ctlr device ptr in the pci ctlr struct
  powerpc/85xx: Board support for ppa8548
  powerpc/fsl: remove extraneous DIU platform functions
  arch/powerpc/platforms/85xx/p1022_ds.c: adjust duplicate test
  powerpc: Documentation for transactional memory on powerpc
  powerpc: Add transactional memory to pseries and ppc64 defconfigs
  powerpc: Add config option for transactional memory
  powerpc: Add transactional memory to POWER8 cpu features
  powerpc: Add new transactional memory state to the signal context
  powerpc: Hook in new transactional memory code
  powerpc: Routines for FP/VSX/VMX unavailable during a transaction
  powerpc: Add transactional memory unavaliable execption handler
  powerpc: Add reclaim and recheckpoint functions for context switching transactional memory processes
  powerpc: Add FP/VSX and VMX register load functions for transactional memory
  powerpc: Add helper functions for transactional memory context switching
  ...
2013-02-23 17:09:55 -08:00
Sukadev Bhattiprolu
f2b4367a69 perf/powerpc: Fix build error
Fix compile errors like those below:

  CC      arch/powerpc/perf/power7-pmu.o
   /home/git/linux/arch/powerpc/perf/power7-pmu.c:397:2: error: initialization from incompatible pointer type [-Werror]

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130205231938.GA24125@us.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-06 12:07:21 +01:00
Sukadev Bhattiprolu
886c3b2d67 perf/POWER7: Make some POWER7 events available in sysfs
Make some POWER7-specific perf events available in sysfs.

	$ /bin/ls -1 /sys/bus/event_source/devices/cpu/events/
	branch-instructions
	branch-misses
	cache-misses
	cache-references
	cpu-cycles
	instructions
	PM_BRU_FIN
	PM_BRU_MPRED
	PM_CMPLU_STALL
	PM_CYC
	PM_GCT_NOSLOT_CYC
	PM_INST_CMPL
	PM_LD_MISS_L1
	PM_LD_REF_L1
	stalled-cycles-backend
	stalled-cycles-frontend

where the 'PM_*' events are POWER specific and the others are the
generic events.

This will enable users to specify these events with their symbolic
names rather than with their raw code.

	perf stat -e 'cpu/PM_CYC' ...

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130123062528.GE13720@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:51 -03:00
Sukadev Bhattiprolu
1c53a27072 perf/POWER7: Make generic event translations available in sysfs
Make the generic perf events in POWER7 available via sysfs.

	$ ls /sys/bus/event_source/devices/cpu/events
	branch-instructions
	branch-misses
	cache-misses
	cache-references
	cpu-cycles
	instructions
	stalled-cycles-backend
	stalled-cycles-frontend

	$ cat /sys/bus/event_source/devices/cpu/events/cache-misses
	event=0x400f0

This patch is based on commits that implement this functionality on x86.
Eg:
	commit a47473939d
	Author: Jiri Olsa <jolsa@redhat.com>
	Date:   Wed Oct 10 14:53:11 2012 +0200

	    perf/x86: Make hardware event translations available in sysfs

Changelog:[v2]
	[Jiri Osla] Drop EVENT_ID() macro since it is only used once.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130123062454.GD13720@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31 13:07:50 -03:00
Anshuman Khandual
6f79cb8134 powerpc/perf: Change PMU flag representation from decimal to hex
Change the representation of the PMU flags from decimal to hex since they
are bitfields which are easier to read in hex.

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-10 15:09:09 +11:00
sukadev@linux.vnet.ibm.com
e6878835ac powerpc/perf: Sample only if SIAR-Valid bit is set in P7+
powerpc/perf: Sample only if SIAR-Valid bit is set in P7+

On POWER7+ two new bits (mmcra[35] and mmcra[36]) indicate whether the
contents of SIAR and SDAR are valid.

For marked instructions on P7+, we must save the contents of SIAR and
SDAR registers only if these new bits are set.

This code/check for the SIAR-Valid bit is specific to P7+, so rather than
waste a CPU-feature bit use the PVR flag.

Note that Carl Love proposed a similar change for oprofile:

        https://lkml.org/lkml/2012/6/22/309

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-27 12:51:05 +10:00
Benjamin Herrenschmidt
1ce447b90f powerpc/perf: Fix instruction address sampling on 970 and Power4
970 and Power4 don't support "continuous sampling" which means that
when we aren't in marked instruction sampling mode (marked events),
SIAR isn't updated with the last instruction sampled before the
perf interrupt. On those processors, we must thus use the exception
SRR0 value as the sampled instruction pointer.

Those processors also don't support the SIPR and SIHV bits in MMCRA
which means we need some kind of heuristic to decide if SIAR values
represent kernel or user addresses.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-03-28 11:33:24 +11:00
Peter Zijlstra
35edc2a509 perf, arch: Rework perf_event_index()
Put the logic to compute the event index into a per pmu method. This
is required because the x86 rules are weird and wonderful and don't
match the capabilities of the current scheme.

AFAIK only powerpc actually has a usable userspace read of the PMCs
but I'm not at all sure anybody actually used that.

ARM is restored to the default since it currently does not support
userspace access at all. And all software events are provided with a
method that reports their index as 0 (disabled).

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Arun Sharma <asharma@fb.com>
Link: http://lkml.kernel.org/n/tip-dfydxodki16lylkt3gl2j7cw@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-21 11:01:07 +01:00
Scott Wood
a11106544f powerpc/perf: e500 support
This implements perf_event support for the Freescale embedded performance
monitor, based on the existing perf_event.c that supports server/classic
chips.

Some limitations:
- Performance monitor interrupts are regular EE interrupts, and thus you
  can't profile places with interrupts disabled.  We may want to implement
  soft IRQ-disabling, with perfmon interrupts exempted and treated as NMIs.
- When trying to schedule multiple event groups at once, and using
  restricted events, situations could arise where scheduling fails even
  though it would be possible.  Consider three groups, each with two events.
  One group has restricted events, the others don't.  The two non-restricted
  groups are scheduled, then one is removed, which happens to occupy the two
  counters that can't do restricted events.  The remaining non-restricted
  group will not be moved to the non-restricted-capable counters to make
  room if the restricted group tries to be scheduled.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-03-05 03:04:08 -06:00