In order to determine if LFENCE is a serializing instruction on AMD
processors, MSR 0xc0011029 (MSR_F10H_DECFG) must be read and the state
of bit 1 checked. This patch will add support to allow a guest to
properly make this determination.
Add the MSR feature callback operation to svm.c and add MSR 0xc0011029
to the list of MSR-based features. If LFENCE is serializing, then the
feature is supported, allowing the hypervisor to set the value of the
MSR that guest will see. Support is also added to write (hypervisor only)
and read the MSR value for the guest. A write by the guest will result in
a #GP. A read by the guest will return the value as set by the host. In
this way, the support to expose the feature to the guest is controlled by
the hypervisor.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Provide a new KVM capability that allows bits within MSRs to be recognized
as features. Two new ioctls are added to the /dev/kvm ioctl routine to
retrieve the list of these MSRs and then retrieve their values. A kvm_x86_ops
callback is used to determine support for the listed MSR-based features.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[Tweaked documentation. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The only core change is the fix for possible memory corruption by
ALSA ctl API since 4.14 kernel due to a thinko. The rest are all
device-specific: in addition to the usual suspects (HD-audio and
USB-audio fixups), a few LPE HDMI audio fixes came in at this time.
-----BEGIN PGP SIGNATURE-----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=UY/c
-----END PGP SIGNATURE-----
Merge tag 'sound-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only core change is the fix for possible memory corruption by ALSA
ctl API since 4.14 kernel due to a thinko.
The rest are all device-specific: in addition to the usual suspects
(HD-audio and USB-audio fixups), a few LPE HDMI audio fixes came in at
this time"
* tag 'sound-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: x86: Fix potential crash at error path
ALSA: x86: Fix missing spinlock and mutex initializations
ALSA: control: Fix memory corruption risk in snd_ctl_elem_read
ALSA: hda - Fix pincfg at resume on Lenovo T470 dock
ALSA: usb-audio: Add a quirck for B&W PX headphones
ALSA: hda: Add a power_save blacklist
ALSA: x86: hdmi: Add single_port option for compatible behavior
- Fix a pin group on the Meson.
- Assign maintainers for Freescale/NXP pin controllers.
-----BEGIN PGP SIGNATURE-----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=jVcD
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Two smallish pin control fixes: one actual code fix for the Meson and
a MAINTAINERS update.
Summary:
- fix a pin group on the Meson
- assign maintainers for Freescale/NXP pin controllers"
* tag 'pinctrl-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
MAINTAINERS: add Freescale pin controllers
pinctrl: meson-axg: adjust uart_ao_b pin group naming
- Fix up device tree properties readout caused by my own
refactorings.
-----BEGIN PGP SIGNATURE-----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=XcVM
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Fix up device tree properties readout caused by my own refactorings"
* tag 'gpio-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: Handle deferred probing in of_find_gpio() properly
gpiolib: Keep returning EPROBE_DEFER when we should
Fix a typo in pkt_start_recovery.
Fixes: 74d46992e0 ("block: replace bi_bdev with a gendisk pointer and partitions index")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_devname use __bdevname to display the device name, and can
only show the major and minor of the part0,
Fix this by using disk_name to display the correct name.
Fixes: 74d46992e0 ("block: replace bi_bdev with a gendisk pointer and partitions index")
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The vm counters is counted in sectors, so we should do the conversation
in submit_bio.
Fixes: 74d46992e0 ("block: replace bi_bdev with a gendisk pointer and partitions index")
Cc: stable@vger.kernel.org
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is lack of cache destroy operation for ceph_file_cachep
when failing from fscache register.
Signed-off-by: Chengguang Xu <cgxu519@icloud.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In case of a failed write request (all retries failed) and when using
libata, the SCSI error handler calls scsi_finish_command(). In the
case of blk-mq this means that scsi_mq_done() does not get called,
that blk_mq_complete_request() does not get called and also that the
mq-deadline .completed_request() method is not called. This results in
the target zone of the failed write request being left in a locked
state, preventing that any new write requests are issued to the same
zone.
Fix this by replacing the .completed_request() method with the
.finish_request() method as this method is always called whether or
not a request completes successfully. Since the .finish_request()
method is only called by the blk-mq core if a .prepare_request()
method exists, add a dummy .prepare_request() method.
Fixes: 5700f69178 ("mq-deadline: Introduce zone locking support")
Cc: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
[ bvanassche: edited patch description ]
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We already have xmalloc(), xcalloc(), and xrealloc((). Add xstrdup()
as well to save tedious error handling.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, sparse issues warnings on code using an attribute
it doesn't know about.
One of the problem with this is that these warnings have no
value for the developer, it's just noise for him. At best these
warnings tell something about some deficiencies of sparse itself
but not about a potential problem with code analyzed.
A second problem with this is that sparse release are, alas,
less frequent than new attributes are added to GCC.
So, avoid the noise by asking sparse to not warn about
attributes it doesn't know about.
Reference: https://marc.info/?l=linux-sparse&m=151871600016790
Reference: https://marc.info/?l=linux-sparse&m=151871725417322
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The comment above the silentoldconfig invocation is outdated.
'make oldconfig' updates just .config and doesn't touch the
include/config/ tree.
This came up in https://lkml.org/lkml/2018/2/12/415.
While fixing the comment, make it more informative by explaining the
purpose of the unfortunately named silentoldconfig.
I can't make sense of the comment re. auto.conf.cmd and a cleaned tree.
include/config/auto.conf and include/config/auto.conf.cmd are both
created simultaneously by silentoldconfig (in
scripts/kconfig/confdata.c, by conf_write_autoconf()), and nothing seems
to remove auto.conf.cmd that wouldn't remove auto.conf. Remove that part
of the comment rather than blindly copying it. It might be a leftover
from an older way of doing things.
The include/config/auto.conf.cmd prerequisite might be there to ensure
that silentoldconfig gets rerun if conf_write_autoconf() fails between
writing out auto.conf.cmd and auto.conf (a comment in the function
indicates that auto.conf is deliberately written out last to mark
completion of the operation). It seems the Makefile dependency between
include/config/auto.conf and .config would already take care of that
though, since include/config/auto.conf would still be out of date re.
.config if the operation fails.
Cop out and leave the prerequisite in for now.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If we have a file with 2 (or more) hard links in the same directory,
remove one of the hard links, create a new file (or link an existing file)
in the same directory with the name of the removed hard link, and then
finally fsync the new file, we end up with a log that fails to replay,
causing a mount failure.
Example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/testdir
$ touch /mnt/testdir/foo
$ ln /mnt/testdir/foo /mnt/testdir/bar
$ sync
$ unlink /mnt/testdir/bar
$ touch /mnt/testdir/bar
$ xfs_io -c "fsync" /mnt/testdir/bar
<power failure>
$ mount /dev/sdb /mnt
mount: mount(2) failed: /mnt: No such file or directory
When replaying the log, for that example, we also see the following in
dmesg/syslog:
[71813.671307] BTRFS info (device dm-0): failed to delete reference to bar, inode 258 parent 257
[71813.674204] ------------[ cut here ]------------
[71813.675694] BTRFS: Transaction aborted (error -2)
[71813.677236] WARNING: CPU: 1 PID: 13231 at fs/btrfs/inode.c:4128 __btrfs_unlink_inode+0x17b/0x355 [btrfs]
[71813.679669] Modules linked in: btrfs xfs f2fs dm_flakey dm_mod dax ghash_clmulni_intel ppdev pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper evdev psmouse i2c_piix4 parport_pc i2c_core pcspkr sg serio_raw parport button sunrpc loop autofs4 ext4 crc16 mbcache jbd2 zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod ata_generic sd_mod virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel floppy virtio e1000 scsi_mod [last unloaded: btrfs]
[71813.679669] CPU: 1 PID: 13231 Comm: mount Tainted: G W 4.15.0-rc9-btrfs-next-56+ #1
[71813.679669] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
[71813.679669] RIP: 0010:__btrfs_unlink_inode+0x17b/0x355 [btrfs]
[71813.679669] RSP: 0018:ffffc90001cef738 EFLAGS: 00010286
[71813.679669] RAX: 0000000000000025 RBX: ffff880217ce4708 RCX: 0000000000000001
[71813.679669] RDX: 0000000000000000 RSI: ffffffff81c14bae RDI: 00000000ffffffff
[71813.679669] RBP: ffffc90001cef7c0 R08: 0000000000000001 R09: 0000000000000001
[71813.679669] R10: ffffc90001cef5e0 R11: ffffffff8343f007 R12: ffff880217d474c8
[71813.679669] R13: 00000000fffffffe R14: ffff88021ccf1548 R15: 0000000000000101
[71813.679669] FS: 00007f7cee84c480(0000) GS:ffff88023fc80000(0000) knlGS:0000000000000000
[71813.679669] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[71813.679669] CR2: 00007f7cedc1abf9 CR3: 00000002354b4003 CR4: 00000000001606e0
[71813.679669] Call Trace:
[71813.679669] btrfs_unlink_inode+0x17/0x41 [btrfs]
[71813.679669] drop_one_dir_item+0xfa/0x131 [btrfs]
[71813.679669] add_inode_ref+0x71e/0x851 [btrfs]
[71813.679669] ? __lock_is_held+0x39/0x71
[71813.679669] ? replay_one_buffer+0x53/0x53a [btrfs]
[71813.679669] replay_one_buffer+0x4a4/0x53a [btrfs]
[71813.679669] ? rcu_read_unlock+0x3a/0x57
[71813.679669] ? __lock_is_held+0x39/0x71
[71813.679669] walk_up_log_tree+0x101/0x1d2 [btrfs]
[71813.679669] walk_log_tree+0xad/0x188 [btrfs]
[71813.679669] btrfs_recover_log_trees+0x1fa/0x31e [btrfs]
[71813.679669] ? replay_one_extent+0x544/0x544 [btrfs]
[71813.679669] open_ctree+0x1cf6/0x2209 [btrfs]
[71813.679669] btrfs_mount_root+0x368/0x482 [btrfs]
[71813.679669] ? trace_hardirqs_on_caller+0x14c/0x1a6
[71813.679669] ? __lockdep_init_map+0x176/0x1c2
[71813.679669] ? mount_fs+0x64/0x10b
[71813.679669] mount_fs+0x64/0x10b
[71813.679669] vfs_kern_mount+0x68/0xce
[71813.679669] btrfs_mount+0x13e/0x772 [btrfs]
[71813.679669] ? trace_hardirqs_on_caller+0x14c/0x1a6
[71813.679669] ? __lockdep_init_map+0x176/0x1c2
[71813.679669] ? mount_fs+0x64/0x10b
[71813.679669] mount_fs+0x64/0x10b
[71813.679669] vfs_kern_mount+0x68/0xce
[71813.679669] do_mount+0x6e5/0x973
[71813.679669] ? memdup_user+0x3e/0x5c
[71813.679669] SyS_mount+0x72/0x98
[71813.679669] entry_SYSCALL_64_fastpath+0x1e/0x8b
[71813.679669] RIP: 0033:0x7f7cedf150ba
[71813.679669] RSP: 002b:00007ffca71da688 EFLAGS: 00000206
[71813.679669] Code: 7f a0 e8 51 0c fd ff 48 8b 43 50 f0 0f ba a8 30 2c 00 00 02 72 17 41 83 fd fb 74 11 44 89 ee 48 c7 c7 7d 11 7f a0 e8 38 f5 8d e0 <0f> ff 44 89 e9 ba 20 10 00 00 eb 4d 48 8b 4d b0 48 8b 75 88 4c
[71813.679669] ---[ end trace 83bd473fc5b4663b ]---
[71813.854764] BTRFS: error (device dm-0) in __btrfs_unlink_inode:4128: errno=-2 No such entry
[71813.886994] BTRFS: error (device dm-0) in btrfs_replay_log:2307: errno=-2 No such entry (Failed to recover log tree)
[71813.903357] BTRFS error (device dm-0): cleaner transaction attach returned -30
[71814.128078] BTRFS error (device dm-0): open_ctree failed
This happens because the log has inode reference items for both inode 258
(the first file we created) and inode 259 (the second file created), and
when processing the reference item for inode 258, we replace the
corresponding item in the subvolume tree (which has two names, "foo" and
"bar") witht he one in the log (which only has one name, "foo") without
removing the corresponding dir index keys from the parent directory.
Later, when processing the inode reference item for inode 259, which has
a name of "bar" associated to it, we notice that dir index entries exist
for that name and for a different inode, so we attempt to unlink that
name, which fails because the inode reference item for inode 258 no longer
has the name "bar" associated to it, making a call to btrfs_unlink_inode()
fail with a -ENOENT error.
Fix this by unlinking all the names in an inode reference item from a
subvolume tree that are not present in the inode reference item found in
the log tree, before overwriting it with the item from the log tree.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If in the same transaction we rename a special file (fifo, character/block
device or symbolic link), create a hard link for it having its old name
then sync the log, we will end up with a log that can not be replayed and
at when attempting to replay it, an EEXIST error is returned and mounting
the filesystem fails. Example scenario:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ mkdir /mnt/testdir
$ mkfifo /mnt/testdir/foo
# Make sure everything done so far is durably persisted.
$ sync
# Create some unrelated file and fsync it, this is just to create a log
# tree. The file must be in the same directory as our special file.
$ touch /mnt/testdir/f1
$ xfs_io -c "fsync" /mnt/testdir/f1
# Rename our special file and then create a hard link with its old name.
$ mv /mnt/testdir/foo /mnt/testdir/bar
$ ln /mnt/testdir/bar /mnt/testdir/foo
# Create some other unrelated file and fsync it, this is just to persist
# the log tree which was modified by the previous rename and link
# operations. Alternatively we could have modified file f1 and fsync it.
$ touch /mnt/f2
$ xfs_io -c "fsync" /mnt/f2
<power failure>
$ mount /dev/sdc /mnt
mount: mount /dev/sdc on /mnt failed: File exists
This happens because when both the log tree and the subvolume's tree have
an entry in the directory "testdir" with the same name, that is, there
is one key (258 INODE_REF 257) in the subvolume tree and another one in
the log tree (where 258 is the inode number of our special file and 257
is the inode for directory "testdir"). Only the data of those two keys
differs, in the subvolume tree the index field for inode reference has
a value of 3 while the log tree it has a value of 5. Because the same key
exists in both trees, but have different index, the log replay fails with
an -EEXIST error when attempting to replay the inode reference from the
log tree.
Fix this by setting the last_unlink_trans field of the inode (our special
file) to the current transaction id when a hard link is created, as this
forces logging the parent directory inode, solving the conflict at log
replay time.
A new generic test case for fstests was also submitted.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing an incremental send of a filesystem with the no-holes feature
enabled, we end up issuing a write operation when using the no data mode
send flag, instead of issuing an update extent operation. Fix this by
issuing the update extent operation instead.
Trivial reproducer:
$ mkfs.btrfs -f -O no-holes /dev/sdc
$ mkfs.btrfs -f /dev/sdd
$ mount /dev/sdc /mnt/sdc
$ mount /dev/sdd /mnt/sdd
$ xfs_io -f -c "pwrite -S 0xab 0 32K" /mnt/sdc/foobar
$ btrfs subvolume snapshot -r /mnt/sdc /mnt/sdc/snap1
$ xfs_io -c "fpunch 8K 8K" /mnt/sdc/foobar
$ btrfs subvolume snapshot -r /mnt/sdc /mnt/sdc/snap2
$ btrfs send /mnt/sdc/snap1 | btrfs receive /mnt/sdd
$ btrfs send --no-data -p /mnt/sdc/snap1 /mnt/sdc/snap2 \
| btrfs receive -vv /mnt/sdd
Before this change the output of the second receive command is:
receiving snapshot snap2 uuid=f6922049-8c22-e544-9ff9-fc6755918447...
utimes
write foobar, offset 8192, len 8192
utimes foobar
BTRFS_IOC_SET_RECEIVED_SUBVOL uuid=f6922049-8c22-e544-9ff9-...
After this change it is:
receiving snapshot snap2 uuid=564d36a3-ebc8-7343-aec9-bf6fda278e64...
utimes
update_extent foobar: offset=8192, len=8192
utimes foobar
BTRFS_IOC_SET_RECEIVED_SUBVOL uuid=564d36a3-ebc8-7343-aec9-bf6fda278e64...
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The fs_info::super_copy is a byte copy of the on-disk structure and all
members must use the accessor macros/functions to obtain the right
value. This was missing in update_super_roots and in sysfs readers.
Moving between opposite endianness hosts will report bogus numbers in
sysfs, and mount may fail as the root will not be restored correctly. If
the filesystem is always used on a same endian host, this will not be a
problem.
Fix this by using the btrfs_set_super...() functions to set
fs_info::super_copy values, and for the sysfs, use the cached
fs_info::nodesize/sectorsize values.
CC: stable@vger.kernel.org
Fixes: df93589a17 ("btrfs: export more from FS_INFO to sysfs")
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
In case of using DUP, we search for enough unallocated disk space on a
device to hold two stripes.
The devices_info[ndevs-1].max_avail that holds the amount of unallocated
space found is directly assigned to stripe_size, while it's actually
twice the stripe size.
Later on in the code, an unconditional division of stripe_size by
dev_stripes corrects the value, but in the meantime there's a check to
see if the stripe_size does not exceed max_chunk_size. Since during this
check stripe_size is twice the amount as intended, the check will reduce
the stripe_size to max_chunk_size if the actual correct to be used
stripe_size is more than half the amount of max_chunk_size.
The unconditional division later tries to correct stripe_size, but will
actually make sure we can't allocate more than half the max_chunk_size.
Fix this by moving the division by dev_stripes before the max chunk size
check, so it always contains the right value, instead of putting a duct
tape division in further on to get it fixed again.
Since in all other cases than DUP, dev_stripes is 1, this change only
affects DUP.
Other attempts in the past were made to fix this:
* 37db63a400 "Btrfs: fix max chunk size check in chunk allocator" tried
to fix the same problem, but still resulted in part of the code acting
on a wrongly doubled stripe_size value.
* 86db25785a "Btrfs: fix max chunk size on raid5/6" unintentionally
broke this fix again.
The real problem was already introduced with the rest of the code in
73c5de0051.
The user visible result however will be that the max chunk size for DUP
will suddenly double, while it's actually acting according to the limits
in the code again like it was 5 years ago.
Reported-by: Naohiro Aota <naohiro.aota@wdc.com>
Link: https://www.spinics.net/lists/linux-btrfs/msg69752.html
Fixes: 73c5de0051 ("btrfs: quasi-round-robin for chunk allocation")
Fixes: 86db25785a ("Btrfs: fix max chunk size on raid5/6")
Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Essentially duplicate the error handling from the above block which
handles the !PageUptodate(page) case and additionally clear
EXTENT_BOUNDARY.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
add_pending_csums was added as part of the new data=ordered
implementation in e6dcd2dc9c ("Btrfs: New data=ordered
implementation"). Even back then it called the btrfs_csum_file_blocks
which can fail but it never bothered handling the failure. In ENOMEM
situation this could lead to the filesystem failing to write the
checksums for a particular extent and not detect this. On read this
could lead to the filesystem erroring out due to crc mismatch. Fix it by
propagating failure from add_pending_csums and handling them.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The srcu_struct in btrfs_fs_info scales in size with NR_CPUS. On
kernels built with NR_CPUS=8192, this can result in kmalloc failures
that prevent mounting.
There is work in progress to try to resolve this for every user of
srcu_struct but using kvzalloc will work around the failures until
that is complete.
As an example with NR_CPUS=512 on x86_64: the overall size of
subvol_srcu is 3460 bytes, fs_info is 6496.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The intel-hid device will not be able to wake up the system any more
after removing the notify handler provided by its driver, so make
its sysfs attributes reflect that.
Fixes: ef884112e5 (platform: x86: intel-hid: Wake up the system from suspend-to-idle)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The intel-vbtn device will not be able to wake up the system any more
after removing the notify handler provided by its driver, so make
its sysfs attributes reflect that.
Fixes: 91f9e850d4 (platform: x86: intel-vbtn: Wake up the system from suspend-to-idle)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The separation of the cpu_entry_area from the fixmap missed the fact that
on 32bit non-PAE kernels the cpu_entry_area mapping might not be covered in
initial_page_table by the previous synchronizations.
This results in suspend/resume failures because 32bit utilizes initial page
table for resume. The absence of the cpu_entry_area mapping results in a
triple fault, aka. insta reboot.
With PAE enabled this works by chance because the PGD entry which covers
the fixmap and other parts incindentally provides the cpu_entry_area
mapping as well.
Synchronize the initial page table after setting up the cpu entry
area. Instead of adding yet another copy of the same code, move it to a
function and invoke it from the various places.
It needs to be investigated if the existing calls in setup_arch() and
setup_per_cpu_areas() can be replaced by the later invocation from
setup_cpu_entry_areas(), but that's beyond the scope of this fix.
Fixes: 92a0f81d89 ("x86/cpu_entry_area: Move it out of the fixmap")
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Woody Suwalski <terraluna977@gmail.com>
Cc: William Grant <william.grant@canonical.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1802282137290.1392@nanos.tec.linutronix.de
We are using test_and_* operations on the status and flag fields of
struct sock_mapping. However, these functions require the operand to be
64-bit aligned on arm64. Currently, only status is 64-bit aligned.
Make status and flags explicitly 64-bit aligned.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
A few misc fixes for 4.16.
* 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: skip ECC for SRIOV in gmc late_init
drm/amd/amdgpu: Correct VRAM width for APUs with GMC9
drm/amdgpu: fix&cleanups for wb_clear
drm/amdgpu: Correct sdma_v4 get_wptr(v2)
drm/amd/powerplay: fix power over limit on Fiji
drm/amdgpu:Fixed wrong emit frame size for enc
drm/amdgpu: move WB_FREE to correct place
drm/amdgpu: only flush hotplug work without DC
drm/amd/display: check for ipp before calling cursor operations
regression with on LVDS with one sun4i device. Plus a sun4i and a virtio-gpu
fixes.
-----BEGIN PGP SIGNATURE-----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=57h5
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2018-02-28' of git://people.freedesktop.org/drm-misc into drm-fixes
Two regression fixes here: a fb format regression on nouveau and a 4.16-rc1
regression with on LVDS with one sun4i device. Plus a sun4i and a virtio-gpu
fixes.
* tag 'drm-misc-fixes-2018-02-28' of git://people.freedesktop.org/drm-misc:
virtio-gpu: fix ioctl and expose the fixed status to userspace.
drm/sun4i: Protect the TCON pixel clocks
drm/sun4i: Enable the output on the pins (tcon0)
drm/nouveau: prefer XBGR2101010 for addfb ioctl
- 3 gem fixes: Clear for in-fence out-fence, fix for clearing exec_flags on execbuf failure, and add back global seqno to tracepoints that had been removed recently by other fence related patch.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJal1J8AAoJEPpiX2QO6xPKQyIH/2rk42oWKjLJboCErj8WkY6B
0Pdt3WghQ8VJPBnAeCvXx+QHf1sKKYEKGNhTTuR2Gfd8V8L7CcK3XUYWkt3zhDS3
b2KW3bpQm3k+lMS55uH7dqXpzustNoslKEWkyT/TGcubDIzWGeKujFxdfkf131+R
/iG5h5eU8ryPaJ8Jv2DwPsWdnT+DGC01e+jtTdcAfWwyPC/glDKWpNTQTaUz0WZM
7lK8o5ta5/CSDFgmzK50amL0gAbHg4g8IhcRFlRf6lupTMJm0GypIrDKM5HmPRuw
RQZA2k8cLsSbFjBc0Mg6ykwyA6T2Jf1T+ymKFAIz8tbBQVeIL6+1y2PE3JDgA7Y=
=axz/
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2018-02-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- 2 display fixes: audio av_enc_map overflow check, and Cannonlake PLL related register offset.
- 3 gem fixes: Clear for in-fence out-fence, fix for clearing exec_flags on execbuf failure, and add back global seqno to tracepoints that had been removed recently by other fence related patch.
* tag 'drm-intel-fixes-2018-02-28' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Make global seqno known in i915_gem_request_execute tracepoint
drm/i915: Clear the in-use marker on execbuf failure
drm/i915/cnl: Fix PORT_TX_DW5/7 register address
drm/i915/audio: fix check for av_enc_map overflow
drm/i915: Fix rsvd2 mask when out-fence is returned
This is the first set of bugfixes for ARM SoCs, fixing a couple
of stability problems, mostly on TI OMAP and Rockchips platforms:
- OMAP2 hwmod clocks must be enabled in the correct order
- OMAP3 Wakeup from resume through PRM IRQ was unreliable
- One regression on OMAP5 caused by a kexec fix
- Rockchip ethernet needs some settings for stable operation on Rock64
- Rockchip based Chrombook Plus needs another clock setting for
stable display suspend/resume
- Rockchip based phyCORE-RK3288 was able to run at an invalid
CPU clock frequency
- Rockchip MMC link was sometimes unreliable
- Multiple fixes to avoid crashes in the Broadcom STB DPFE driver
Other minor changes include:
- Devicetree fixes for incorrect hardware description (rockchip,
omap, Gemini, amlogic)
- Some MAINTAINER file updates to correct email and git addresses
- Some fixes addressing 'make W=1' dtc warnings (broadcom, amlogic,
cavium, qualcomm, hisilicon, zx)
- Fixes for LTO-compilation (orion, davinci, clps711x)
- One fix for an incorrect Kconfig errata selection
- A memory leak in the OMAP timer driver
- A kernel data leak in OMAP1 debugfs files
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fcv0
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is the first set of bugfixes for ARM SoCs, fixing a couple of
stability problems, mostly on TI OMAP and Rockchips platforms:
- OMAP2 hwmod clocks must be enabled in the correct order
- OMAP3 Wakeup from resume through PRM IRQ was unreliable
- one regression on OMAP5 caused by a kexec fix
- Rockchip ethernet needs some settings for stable operation on
Rock64
- Rockchip based Chrombook Plus needs another clock setting for
stable display suspend/resume
- Rockchip based phyCORE-RK3288 was able to run at an invalid CPU
clock frequency
- Rockchip MMC link was sometimes unreliable
- multiple fixes to avoid crashes in the Broadcom STB DPFE driver
Other minor changes include:
- Devicetree fixes for incorrect hardware description (rockchip,
omap, Gemini, amlogic)
- some MAINTAINER file updates to correct email and git addresses
- some fixes addressing 'make W=1' dtc warnings (broadcom, amlogic,
cavium, qualcomm, hisilicon, zx)
- fixes for LTO-compilation (orion, davinci, clps711x)
- one fix for an incorrect Kconfig errata selection
- a memory leak in the OMAP timer driver
- a kernel data leak in OMAP1 debugfs files"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
MAINTAINERS: update entries for ARM/STM32
ARM: dts: bcm283x: Move arm-pmu out of soc node
ARM: dts: bcm283x: Fix unit address of local_intc
ARM: dts: NSP: Fix amount of RAM on BCM958625HR
ARM: dts: Set D-Link DNS-313 SATA to muxmode 0
ARM: omap2: set CONFIG_LIRC=y in defconfig
ARM: dts: imx6dl: Include correct dtsi file for Engicam i.CoreM6 DualLite/Solo RQS
memory: brcmstb: dpfe: support new way of passing data from the DCPU
memory: brcmstb: dpfe: fix type declaration of variable "ret"
memory: brcmstb: dpfe: properly mask vendor error bits
ARM: BCM: dts: Remove leading 0x and 0s from bindings notation
ARM: orion: fix orion_ge00_switch_board_info initialization
ARM: davinci: mark spi_board_info arrays as const
ARM: clps711x: mark clps711x_compat as const
arm: zx: dts: Remove leading 0x and 0s from bindings notation
arm64: dts: Remove leading 0x and 0s from bindings notation
arm64: dts: cavium: fix PCI bus dtc warnings
MAINTAINERS: ARM: at91: update my email address
soc: imx: gpc: de-register power domains only if initialized
ARM: dts: rockchip: Fix DWMMC clocks
...
This week we have a single fix: replacing smp_mb() with __smp_mb(). We
were the only architecture with smp_mb() and it appears to just be
clearly wrong, so I think this is a pretty safe patch for an RC.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAlqUQEETHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRDvTKFQLMurQciND/wJOHzf/O7aHWlt7UYvzKsqgIdxNKiH
IWbv4jTmJGJju10Ht5jImuIxSYJ5gu24Vj5f+/XkFRZfTGrOGgByXh37RuFP51kH
3yFqzDoBfmBHu8NTeyAb6hHtozvcVTBYynSqKBJzsCz3mrBgqobvzoii1R2TX4lc
+cPNffv+YRPZSHdHOpaytYIYdVxbcFmsGocftjzZ9AbR87mbT1zxDJV+YHgH86vE
2qqaWYTJChCCQo+We57+0HheMtzjvuC9wXRg7yqDOhe5mvpxNQf/RLhr4cxJtcFN
i96ERaRg0B5PAU+Pcql0wVL9oigd7bPv4Ncc+rjPG9efkXDKeN/ueD1az9yWRqE1
SUjJROel5tF6Yxytn2XX+MEIPEy0AO1WlD+9o23aoaKXHgSu8kMU3Zgryvs+S6W5
VkZeeUk/VV4YIQy8HwMujgjKzLXOoBjAHOvSyyf75ERkYbQxpEjkWRZWtjsiLGbP
lgHX59p3C2J3w/xLA+rUE3gdPm4qY45l232RJFlFS6e+wG32/Fw+Yc+PxFHhPARK
J+mhAVswhfrC4x9KbL83y8Zf9RvJ4y4qnpJAOyze+OgARq30SLzr6ul+5nHQAkb+
4lcPS0ROsxpa83BnGC8bfz9TGoomdYJrT8piV+lx8wTPrZQg4gfAoStSyu89V0Vz
LBcwO6MObWcdhw==
=ke4H
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-4.16-rc4_smp_mb' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V fix from Palmer Dabbelt:
"This week we have a single fix: replacing smp_mb() with __smp_mb().
We were the only architecture with smp_mb() and it appears to just be
clearly wrong, so I think this is a pretty safe patch for an RC"
* tag 'riscv-for-linus-4.16-rc4_smp_mb' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
riscv/barrier: Define __smp_{mb,rmb,wmb}
On CPU hotunplug the enqueued timers of the unplugged CPU are migrated to a
live CPU. This happens from the control thread which initiated the unplug.
If the CPU on which the control thread runs came out from a longer idle
period then the base clock of that CPU might be stale because the control
thread runs prior to any event which forwards the clock.
In such a case the timers from the unplugged CPU are queued on the live CPU
based on the stale clock which can cause large delays due to increased
granularity of the outer timer wheels which are far away from base:;clock.
But there is a worse problem than that. The following sequence of events
illustrates it:
- CPU0 timer1 is queued expires = 59969 and base->clk = 59131.
The timer is queued at wheel level 2, with resulting expiry time = 60032
(due to level granularity).
- CPU1 enters idle @60007, with next timer expiry @60020.
- CPU0 is hotplugged at @60009
- CPU1 exits idle and runs the control thread which migrates the
timers from CPU0
timer1 is now queued in level 0 for immediate handling in the next
softirq because the requested expiry time 59969 is before CPU1 base->clk
60007
- CPU1 runs code which forwards the base clock which succeeds because the
next expiring timer. which was collected at idle entry time is still set
to 60020.
So it forwards beyond 60007 and therefore misses to expire the migrated
timer1. That timer gets expired when the wheel wraps around again, which
takes between 63 and 630ms depending on the HZ setting.
Address both problems by invoking forward_timer_base() for the control CPUs
timer base. All other places, which might run into a similar problem
(mod_timer()/add_timer_on()) already invoke forward_timer_base() to avoid
that.
[ tglx: Massaged comment and changelog ]
Fixes: a683f390b9 ("timers: Forward the wheel clock whenever possible")
Co-developed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: linux-arm-msm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180118115022.6368-1-clingutla@codeaurora.org
pull the following:
- Markus provides two minor fixes to the Broadcom STB DPFE driver, one
to properly mask bits, and a second one to use the correct type. The
third commit is a consequence of a newer DFPE firmware which would
unfortunately crash without appropriate kernel changes.
-----BEGIN PGP SIGNATURE-----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=HV7L
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.16/drivers-fixes' of https://github.com/Broadcom/stblinux into fixes
Pull "Broadcom drivers fixes for 4.16" from Florian Fainelli:
This pull request contains Broadcom SoCs drivers fixes for 4.16, please
pull the following:
- Markus provides two minor fixes to the Broadcom STB DPFE driver, one
to properly mask bits, and a second one to use the correct type. The
third commit is a consequence of a newer DFPE firmware which would
unfortunately crash without appropriate kernel changes.
* tag 'arm-soc/for-4.16/drivers-fixes' of https://github.com/Broadcom/stblinux:
memory: brcmstb: dpfe: support new way of passing data from the DCPU
memory: brcmstb: dpfe: fix type declaration of variable "ret"
memory: brcmstb: dpfe: properly mask vendor error bits
4.16, please pull the following:
- Mathieu fixes leading 0x and 0's from bindings and Device Tree source
files, he has done this treewide and most of his changes are already in
4.16
- Stefan provides two changes to the BCM283x DTS files in order to fix
DTC warnings
- Florian fixes the amount of RAM on the BCM958625HR reference board to
properly limit to what is initialized by the bootloader
-----BEGIN PGP SIGNATURE-----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=9RVY
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.16/devicetree-fixes' of https://github.com/Broadcom/stblinux into fixes
Pull "Broadcom devicetree fixes for 4.16" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
4.16, please pull the following:
- Mathieu fixes leading 0x and 0's from bindings and Device Tree source
files, he has done this treewide and most of his changes are already in
4.16
- Stefan provides two changes to the BCM283x DTS files in order to fix
DTC warnings
- Florian fixes the amount of RAM on the BCM958625HR reference board to
properly limit to what is initialized by the bootloader
* tag 'arm-soc/for-4.16/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Move arm-pmu out of soc node
ARM: dts: bcm283x: Fix unit address of local_intc
ARM: dts: NSP: Fix amount of RAM on BCM958625HR
ARM: BCM: dts: Remove leading 0x and 0s from bindings notation
Changes old git repository to the maintained one and adds more patterns.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Acked-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix i.MX GPC driver to remove power domains only when they are
initialized in imx_gpc_probe().
- Fix the broken Engicam i.CoreM6 DualLite/Solo RQS board DT to include
imx6dl.dtsi instead of imx6q.dtsi.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJalfO8AAoJEFBXWFqHsHzOPk4IALx0Gl07tgaTy2VgZJT2w0ud
ZoyeicSNxfM42auRHjC6QhYpQztw8+k4PCuGmUOutHc2Hbw21EXDxLiSwYgGarBR
3OuYShxBg6IExpUk7TM0kDFU0Z4GcpTjAovloM7yjLxCj88dzS+NIiUwPSl02kTp
iAGxVtTQOYLotJFZLQ+DGH3SuaEvOEzeQZz/v4v2/z1IsJRI5IQ2ILtSFEOYhMwh
vgagvvHopS2jIfLXd47PJJvUQuRjXH00FMvrEmBT2b31HJDU2uKn+y4BtMCJHzJV
cTaCwKcrJcLCH2tv5LVUg86VcbL7qbMGjqKQk4aSuEtMtJkpkD4palNG+y69N9g=
=NKMF
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
Pull "i.MX fixes for 4.16" from Shawn Guo:
- Fix i.MX GPC driver to remove power domains only when they are
initialized in imx_gpc_probe().
- Fix the broken Engicam i.CoreM6 DualLite/Solo RQS board DT to include
imx6dl.dtsi instead of imx6q.dtsi.
* tag 'imx-fixes-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6dl: Include correct dtsi file for Engicam i.CoreM6 DualLite/Solo RQS
soc: imx: gpc: de-register power domains only if initialized
Pull kselftest fixes from Shuah Khan:
"Fixes for various problems in test output, compile errors, and missing
configs"
* tag 'linux-kselftest-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vm: update .gitignore with new test
selftests: memory-hotplug: silence test command echo
selftests/futex: Fix line continuation in Makefile
selftests: memfd: add config fragment for fuse
selftests: pstore: Adding config fragment CONFIG_PSTORE_RAM=m
selftests/android: Fix line continuation in Makefile
selftest/vDSO: fix O=
selftests: sync: missing CFLAGS while compiling
DDR4 has a 64-bit width not 128-bits. It was reporting
twice the width. Tested with my Ryzen 2400G.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix:
should do right shift on wb before clearing
cleanups:
1,should memset all wb buffer
2,set max wb number to 128 (total 4KB) is big enough
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the original method will change the wptr value in wb.
v2:
furthur cleanup
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
power containment disabled only on Fiji and compute
power profile. It violates PCIe spec and may cause power
supply failed. Enabling it will fix the issue, even the
fix will drop performance of some compute tests.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Emit frame size should match with corresponding function,
uvd_v6_0_enc_ring_emit_vm_flush has 5 amdgpu_ring_write
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
WB_FREE should be put after all engines's hw_fini
done, otherwise the invalid wptr/rptr_addr would still
be used by engines which trigger abnormal bugs.
This fixes couple DMAR reading error in host side for SRIOV
after guest kmd is unloaded.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
since hotplug_work is initialized under the case of
no dc support
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently all cursor related functions are made to all
pipes that are attached to a particular stream.
This is not applicable to pipes that do not have cursor plane
initialised like underlay.
Hence this patch allows cursor related operations on a pipe
only if ipp in available on that particular pipe.
The check is added to set_cursor_position & set_cursor_attribute.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
- Fix some compiler warnings
- Fix block rservations for transactions created during log recovery
- Fix resource leaks when respecifying mount options
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=A2Bo
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- fix some compiler warnings
- fix block reservations for transactions created during log recovery
- fix resource leaks when respecifying mount options
* tag 'xfs-4.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix potential memory leak in mount option parsing
xfs: reserve blocks for refcount / rmap log item recovery
xfs: use memset to initialize xfs_scrub_agfl_info
Today the tty0 and hvc0 consoles are added as a preferred consoles for
pv domUs only. As this requires a boot parameter for getting dom0
messages per default, add them for dom0, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
A toolstack may delete the vif frontend and backend xenstore entries
while xen-netfront is in the removal code path. In that case, the
checks for xenbus_read_driver_state would return XenbusStateUnknown, and
xennet_remove would hang indefinitely. This hang prevents system
shutdown.
xennet_remove must be able to handle XenbusStateUnknown, and
netback_changed must also wake up the wake_queue for that state as well.
Fixes: 5b5971df3b ("xen-netfront: remove warning when unloading module")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Cc: Eduardo Otubo <otubo@redhat.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Current cleanup in the error path of xen_bind_pirq_msi_to_irq is
wrong. First of all there's an off-by-one in the cleanup loop, which
can lead to unbinding wrong IRQs.
Secondly IRQs not bound won't be freed, thus leaking IRQ numbers.
Note that there's no need to differentiate between bound and unbound
IRQs when freeing them, __unbind_from_irq will deal with both of them
correctly.
Fixes: 4892c9b4ad ("xen: add support for MSI message groups")
Reported-by: Hooman Mirhadi <mirhadih@amazon.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Amit Shah <aams@amazon.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Pull NVMe fixes from Keith for 4.16-rc.
* 'for-jens' of git://git.infradead.org/nvme:
nvmet: fix PSDT field check in command format
nvme-multipath: fix sysfs dangerously created links
nvme-pci: Fix nvme queue cleanup if IRQ setup fails
nvmet-loop: use blk_rq_payload_bytes for sgl selection
nvme-rdma: use blk_rq_payload_bytes instead of blk_rq_bytes
nvme-fabrics: don't check for non-NULL module in nvmf_register_transport
