Previously, vlan id and source MAC were used from QP attributes. Since
the net device is now stored in the GID attributes, they could be used
instead of getting this information from the QP attributes.
IB_QP_SMAC, IB_QP_ALT_SMAC, IB_QP_VID and IB_QP_ALT_VID were removed
because there is no known libibverbs that uses them.
This commit also modifies the vendors (mlx4, ocrdma) drivers in order
to use the new approach.
ocrdma driver changes were done by Somnath Kotur <Somnath.Kotur@Avagotech.Com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The mcg "too many pending requests" warning message fills the log
when OpenSM is downed. Demote the message from warning level to
debug level.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
send_mad_to_wire takes the same spinlock that is taken in
the interrupt context. Therefore, it needs irqsave/restore.
Fixes: b9c5d6a643 ('IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOV')
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since there is no connection between the MAC/VLAN and the GID
when using IP-based addressing, the proxy QP1 (running on the
slave) must pass the source-mac, destination-mac, and vlan_id
information separately from the GID. Additionally, the Host
must pass the remote source-mac and vlan_id back to the slave,
This is achieved as follows:
Outgoing MADs:
1. Source MAC: obtained from the CQ completion structure
(struct ib_wc, smac field).
2. Destination MAC: obtained from the tunnel header
3. vlan_id: obtained from the tunnel header.
Incoming MADs
1. The source (i.e., remote) MAC and vlan_id are passed in
the tunnel header to the proxy QP1.
VST mode support:
For outgoing MADs, the vlan_id obtained from the header is
discarded, and the vlan_id specified by the Hypervisor is used
instead.
For incoming MADs, the incoming vlan_id (in the wc) is discarded, and the
"invalid" vlan (0xffff) is substituted when forwarding to the slave.
Signed-off-by: Moni Shoua <monis@mellanox.co.il>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A client re-register event invokes cleanup of all MCGs. This is
required to protect against misbehaved guests leading to corruption of
join/leave database. However, since cleaning up the MCGs is a heavy
operation, it is pushed to a work queue for further processing.
Client re-register is also propagated to ULPs (e.g IPoIB).
However, since the cleanup is performed in a workqueue, the ULP could
leave and re-join groups before the cleanup occurs. In this case,
when the cleanup takes place, it prunes the (newly-joined) MCGs and
the ULP is left without actual MCGs while believing it joined them.
Fix this by setting the flushing flag before invoking the cleanup task
and clearing it after flushing is complete.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
In the MAD paravirtualization code, one of the checks performed when
forwarding QP1 (GSI) packets from wire to slave was a P_Key check: the
P_Key received in the MAD must be present in the guest's paravirtualized
P_Key table, and at least one of the (packet P_Key, guest P_Key) must
be a full-membership P_Key.
However, if everyone involved has only limited membership in the
default P_Key, then packets sent by full-member remote hosts arrive at
the PPF but are not passed on to the VFs with the current P_Key1 check.
Fix this as follows:
1. Don't care if P_Key received over wire is full or not. If it
successfully passed HW checks on the real QP1, then simply pass it
to guest regardless of whether the guest has full or limited
membership in its P_Key table.
2. If the guest (including paravirtualized master) has both full and
limited P_Key forms in its table, preferentially pass the
paravirtualized P_Key index of the full P_Key form in the tunnel
header.
3. In the multicast join flow (mlx4/mcg.c), use the index for the
default P_Key (wherever it is located) in replies generated from
within the mcg module (previously, P_Key index 0 was used in all
cases).
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
This directory is added only for the master -- slaves do not have it.
The sysfs iov directory is used to manage and examine the port P_Key
and guid paravirtualization.
Under iov/ports, the administrator may examine the gid and P_Key tables
as they are present in the device (and as are seen in the "network
view" presented to the SM).
Under the iov/<pci slot number> directories, the admin may map the
index numbers in the physical tables (as under iov/ports) to the
paravirtualized index numbers that guests see.
For example, if the administrator, for port 1 on guest 2 maps physical
pkey index 10 to virtual index 1, then that guest, whenever it uses
its pkey index 1, will actually be using the real pkey index 10.
Based on patch from Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
MCG paravirtualization support includes:
- Creating multicast groups by VFs, and keeping accounting of them
- Leaving multicast groups by VFs
- Updating SM only with real changes in the overall picture of MCGs status
- Creation of MGID=0 groups (let SM choose MGID)
Note that the MCG module maintains its own internal MCG object
reference counts. The reason for this is that the IB core is used to
track only the multicast groups joins generated by the PF it runs
over. The PF IB core layer is unaware of slaves, so it cannot be used
to keep track of MCG joins they generate.
Signed-off-by: Oren Duer <oren@mellanox.co.il>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
