Previously when populating the set ipv6 address action, we incorrectly
made use of pedit's key index to determine which 32bit word should be
set. We now calculate which word has been selected based on the offset
provided by the pedit action.
Fixes: 354b82bb32 ("nfp: add set ipv6 source and destination address")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously we only allowed a single header key per pedit action to
change the header. This used to result in the last header key in the
pedit action to overwrite previous headers. We now keep track of them
and allow multiple header keys per pedit action.
Fixes: c0b1bd9a8b ("nfp: add set ipv4 header action flower offload")
Fixes: 354b82bb32 ("nfp: add set ipv6 source and destination address")
Fixes: f8b7b0a6b1 ("nfp: add set tcp and udp header action flower offload")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously we did not correctly change headers when using multiple
pedit actions with partial masks. We now take this into account and
no longer just commit the last pedit action.
Fixes: c0b1bd9a8b ("nfp: add set ipv4 header action flower offload")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a missing call to rxrpc_put_peer() on the main path through the
rxrpc_error_report() function. This manifests itself as a ref leak
whenever an ICMP packet or other error comes in.
In commit f334430316, the hand-off of the ref to a work item was removed
and was not replaced with a put.
Fixes: f334430316 ("rxrpc: Fix error distribution")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Other than asoc pmtu sync from all transports, sctp_assoc_sync_pmtu
is also processing transport pmtu_pending by icmp packets. But it's
meaningless to use sctp_dst_mtu(t->dst) as new pmtu for a transport.
The right pmtu value should come from the icmp packet, and it would
be saved into transport->mtu_info in this patch and used later when
the pmtu sync happens in sctp_sendmsg_to_asoc or sctp_packet_config.
Besides, without this patch, as pmtu can only be updated correctly
when receiving a icmp packet and no place is holding sock lock, it
will take long time if the sock is busy with sending packets.
Note that it doesn't process transport->mtu_info in .release_cb(),
as there is no enough information for pmtu update, like for which
asoc or transport. It is not worth traversing all asocs to check
pmtu_pending. So unlike tcp, sctp does this in tx path, for which
mtu_info needs to be atomic_t.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit db65f35f50 ("net: fec: add support of ethtool get_regs") introduce
ethool "--register-dump" interface to dump all FEC registers.
But not all silicon implementations of the Freescale FEC hardware module
have the FRBR (FIFO Receive Bound Register) and FRSR (FIFO Receive Start
Register) register, so we should not be trying to dump them on those that
don't.
To fix it we create a quirk flag, FEC_QUIRK_HAS_RFREG, and check it before
dump those RX FIFO registers.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial fix to spelling mistake in DP_INFO message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The binding table's 'cluster_scope' list is rcu protected to handle
races between threads changing the list and those traversing the list at
the same moment. We have now found that the function named_distribute()
uses the regular list_for_each() macro to traverse the said list.
Likewise, the function tipc_named_withdraw() is removing items from the
same list using the regular list_del() call. When these two functions
execute in parallel we see occasional crashes.
This commit fixes this by adding the missing _rcu() suffixes.
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The udpv6_encap_enable() function is part of the ipv6 code, and if that is
configured as a loadable module and rxrpc is built in then a build failure
will occur because the conditional check is wrong:
net/rxrpc/local_object.o: In function `rxrpc_lookup_local':
local_object.c:(.text+0x2688): undefined reference to `udpv6_encap_enable'
Use the correct config symbol (CONFIG_AF_RXRPC_IPV6) in the conditional
check rather than CONFIG_IPV6 as that will do the right thing.
Fixes: 5271953cad ("rxrpc: Use the UDP encap_rcv hook")
Reported-by: kbuild-all@01.org
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
When commit 270972554c ("[IPV6]: ROUTE: Add Router Reachability
Probing (RFC4191).") introduced router probing, the rt6_probe() function
required that a neighbour entry existed. This neighbour entry is used to
record the timestamp of the last probe via the ->updated field.
Later, commit 2152caea71 ("ipv6: Do not depend on rt->n in rt6_probe().")
removed the requirement for a neighbour entry. Neighbourless routes skip
the interval check and are not rate-limited.
This patch adds rate-limiting for neighbourless routes, by recording the
timestamp of the last probe in the fib6_info itself.
Fixes: 2152caea71 ("ipv6: Do not depend on rt->n in rt6_probe().")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On GENETv5, there is a hardware issue which prevents the GENET hardware
from generating a link UP interrupt when the link is operating at
10Mbits/sec. Since we do not have any way to configure the link
detection logic, fallback to polling in that case.
Fixes: 421380856d ("net: bcmgenet: add support for the GENETv5 hardware")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes gcc '-Wunused-but-set-variable' warning:
net/rxrpc/output.c: In function 'rxrpc_reject_packets':
net/rxrpc/output.c:527:11: warning:
variable 'ioc' set but not used [-Wunused-but-set-variable]
'ioc' is the correct kvec num when sending a BUSY (or an ABORT) response
packet.
Fixes: ece64fec16 ("rxrpc: Emit BUSY packets when supposed to rather than ABORTs")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix an uninitialised variable introduced by the last patch. This can cause
a crash when a new call comes in to a local service, such as when an AFS
fileserver calls back to the local cache manager.
Fixes: c1e15b4944 ("rxrpc: Fix the packet reception routine")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the commit referred to below we added link tolerance as an additional
criteria for declaring broadcast transmission "stale" and resetting the
unicast links to the affected node.
Unfortunately, this 'improvement' introduced two bugs, which each and
one alone cause only limited problems, but combined lead to seemingly
stochastic unicast link resets, depending on the amount of broadcast
traffic transmitted.
The first issue, a missing initialization of the 'tolerance' field of
the receiver broadcast link, was recently fixed by commit 047491ea33
("tipc: set link tolerance correctly in broadcast link").
Ths second issue, where we omit to reset the 'stale_cnt' field of
the same link after a 'stale' period is over, leads to this counter
accumulating over time, and in the absence of the 'tolerance' criteria
leads to the above described symptoms. This commit adds the missing
initialization.
Fixes: a4dc70d46c ("tipc: extend link reset criteria for stale packet retransmission")
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WHen an llc sock is added into the sk_laddr_hash of an llc_sap,
it is not marked with SOCK_RCU_FREE.
This causes that the sock could be freed while it is still being
read by __llc_lookup_established() with RCU read lock. sock is
refcounted, but with RCU read lock, nothing prevents the readers
getting a zero refcnt.
Fix it by setting SOCK_RCU_FREE in llc_sap_add_socket().
Reported-by: syzbot+11e05f04c15e03be5254@syzkaller.appspotmail.com
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbvqcMAAoJEEg/ir3gV/o+eFsH/2TbJH+i1BuGMVwCB8o+U1Rz
C01pJmR7Lb7WwQZ8ZKTOqQkS7BkGX1hNGyIlc4i6ZnP+4gsVJAbP6LKPjTvyD7e6
TNb8bvxTUCOovknrevKkGba8tzoTTsC4wwwbHLGHd1hkKSY1P5hXg8R7vpear+n6
/PFJwzpIXDAa8AHqeORCNYj7MneUm3kaahcmSOxOhvDbRx3UG9cgy7tEhPjZbRn5
jPFsxFCSPcGedtI+g8bzodmpneTcu1KF6QCunrl2bGt5EzgDrbaw1UUoctxD2CJR
Ch45W807EvBJoFiJXXCNf9N+p5020F/Q+mTmK7khPirUjdtoLdcT9Goswpjfbtk=
=vJIA
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2018-10-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2018-10-10
This pull request includes some fixes to mlx5 driver,
Please pull and let me know if there's any problem.
For -stable v4.11:
('net/mlx5: Take only bit 24-26 of wqe.pftype_wq for page fault type')
For -stable v4.17:
('net/mlx5: Fix memory leak when setting fpga ipsec caps')
For -stable v4.18:
('net/mlx5: WQ, fixes for fragmented WQ buffers API')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to what has been done in 8b4c3cdd9d ("net: sched: Add policy
validation for tc attributes"), fix classifier code to add validation of
TCA_CHAIN and TCA_KIND netlink attributes.
tested with:
# ./tdc.py -c filter
v2: Let sch_api and cls_api share nla_policy they have in common, thanks
to David Ahern.
v3: Avoid EXPORT_SYMBOL(), as validation of those attributes is not done
by TC modules, thanks to Cong Wang.
While at it, restore the 'Delete / get qdisc' comment to its orginal
position, just above tc_get_qdisc() function prototype.
Fixes: 5bc1701881 ("net: sched: introduce multichain support for filters")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In dev_ethtool(), the eth command 'ethcmd' is firstly copied from the
use-space buffer 'useraddr' and checked to see whether it is
ETHTOOL_PERQUEUE. If yes, the sub-command 'sub_cmd' is further copied from
the user space. Otherwise, 'sub_cmd' is the same as 'ethcmd'. Next,
according to 'sub_cmd', a permission check is enforced through the function
ns_capable(). For example, the permission check is required if 'sub_cmd' is
ETHTOOL_SCOALESCE, but it is not necessary if 'sub_cmd' is
ETHTOOL_GCOALESCE, as suggested in the comment "Allow some commands to be
done by anyone". The following execution invokes different handlers
according to 'ethcmd'. Specifically, if 'ethcmd' is ETHTOOL_PERQUEUE,
ethtool_set_per_queue() is called. In ethtool_set_per_queue(), the kernel
object 'per_queue_opt' is copied again from the user-space buffer
'useraddr' and 'per_queue_opt.sub_command' is used to determine which
operation should be performed. Given that the buffer 'useraddr' is in the
user space, a malicious user can race to change the sub-command between the
two copies. In particular, the attacker can supply ETHTOOL_PERQUEUE and
ETHTOOL_GCOALESCE to bypass the permission check in dev_ethtool(). Then
before ethtool_set_per_queue() is called, the attacker changes
ETHTOOL_GCOALESCE to ETHTOOL_SCOALESCE. In this way, the attacker can
bypass the permission check and execute ETHTOOL_SCOALESCE.
This patch enforces a check in ethtool_set_per_queue() after the second
copy from 'useraddr'. If the sub-command is different from the one obtained
in the first copy in dev_ethtool(), an error code EINVAL will be returned.
Fixes: f38d138a7d ("net/ethtool: support set coalesce per queue")
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
In ethtool_get_rxnfc(), the eth command 'cmd' is compared against
'ETHTOOL_GRXFH' to see whether it is necessary to adjust the variable
'info_size'. Then the whole structure of 'info' is copied from the
user-space buffer 'useraddr' with 'info_size' bytes. In the following
execution, 'info' may be copied again from the buffer 'useraddr' depending
on the 'cmd' and the 'info.flow_type'. However, after these two copies,
there is no check between 'cmd' and 'info.cmd'. In fact, 'cmd' is also
copied from the buffer 'useraddr' in dev_ethtool(), which is the caller
function of ethtool_get_rxnfc(). Given that 'useraddr' is in the user
space, a malicious user can race to change the eth command in the buffer
between these copies. By doing so, the attacker can supply inconsistent
data and cause undefined behavior because in the following execution 'info'
will be passed to ops->get_rxnfc().
This patch adds a necessary check on 'info.cmd' and 'cmd' to confirm that
they are still same after the two copies in ethtool_get_rxnfc(). Otherwise,
an error code EINVAL will be returned.
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Originally, we have an issue where r8169 MSI-X interrupt is broken after
S3 suspend/resume on RTL8106e of ASUS X441UAR.
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136]
(rev 07)
Subsystem: ASUSTeK Computer Inc. RTL810xE PCI Express Fast
Ethernet controller [1043:200f]
Flags: bus master, fast devsel, latency 0, IRQ 16
I/O ports at e000 [size=256]
Memory at ef100000 (64-bit, non-prefetchable) [size=4K]
Memory at e0000000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable+ Count=4 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 01-00-00-00-36-4c-e0-00
Capabilities: [170] Latency Tolerance Reporting
Kernel driver in use: r8169
Kernel modules: r8169
We found the all of the values in PCI BAR=4 of the ethernet adapter
become 0xFF after system resumes. That breaks the MSI-X interrupt.
Therefore, we can only fall back to MSI interrupt to fix the issue at
that time.
However, there is a commit which resolves the drivers getting nothing in
PCI BAR=4 after system resumes. It is 04cb3ae895d7 "PCI: Reprogram
bridge prefetch registers on resume" by Daniel Drake.
After apply the patch, the ethernet adapter works fine before suspend
and after resume. So, we can revert the workaround after the commit
"PCI: Reprogram bridge prefetch registers on resume" is merged into main
tree.
This patch reverts commit 7bb05b85bc
"r8169: don't use MSI-X on RTL8106e".
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=201181
Fixes: 7bb05b85bc ("r8169: don't use MSI-X on RTL8106e")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 0b9871a3a8.
Causes crashes with qemu, interacts badly with commit commit
6d0a70a284 ("vsprintf: print OF node name using full_name")
etc.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This documentation was inadvertently released under the CC-BY-SA-4.0
license. It was intended to be released under GPL-2.0 or later.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
The IDA was declared on the stack instead of statically, so lockdep
triggered a warning that it was improperly initialised.
Reported-by: 0day bot
Tested-by: Rong Chen <rong.a.chen@intel.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Add ELAN061C to the ACPI table to support Elan touchpad found in Lenovo
IdeaPad 330-15IGM.
Signed-off-by: Mikhail Nikiforov <jackxviichaos@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The recent patch to fix the afs_server struct leak didn't actually fix the
bug, but rather fixed some of the symptoms. The problem is that an
asynchronous call that holds a resource pointed to by call->reply[0] will
find the pointer cleared in the call destructor, thereby preventing the
resource from being cleaned up.
In the case of the server record leak, the afs_fs_get_capabilities()
function in devel code sets up a call with reply[0] pointing at the server
record that should be altered when the result is obtained, but this was
being cleared before the destructor was called, so the put in the
destructor does nothing and the record is leaked.
Commit f014ffb025 removed the additional ref obtained by
afs_install_server(), but the removal of this ref is actually used by the
garbage collector to mark a server record as being defunct after the record
has expired through lack of use.
The offending clearance of call->reply[0] upon completion in
afs_process_async_call() has been there from the origin of the code, but
none of the asynchronous calls actually use that pointer currently, so it
should be safe to remove (note that synchronous calls don't involve this
function).
Fix this by the following means:
(1) Revert commit f014ffb025.
(2) Remove the clearance of reply[0] from afs_process_async_call().
Without this, afs_manage_servers() will suffer an assertion failure if it
sees a server record that didn't get used because the usage count is not 1.
Fixes: f014ffb025 ("afs: Fix afs_server struct leak")
Fixes: 08e0e7c82e ("[AF_RXRPC]: Make the in-kernel AFS filesystem use AF_RXRPC.")
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we did some signal processing, we have to reload the pt_regs
tstate register because it's value may have changed.
In doing so we also have to extract the %pil value contained in there
anre load that into %l4.
This value is at bit 20 and thus needs to be shifted down before we
later write it into the %pil register.
Most of the time this is harmless as we are returning to userspace
and the %pil is zero for that case.
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2018-10-14
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix xsk map update and delete operation to not call synchronize_net()
but to piggy back on SOCK_RCU_FREE for sockets instead as we are not
allowed to sleep under RCU, from Björn.
2) Do not change RLIMIT_MEMLOCK in reuseport_bpf selftest if the process
already has unlimited RLIMIT_MEMLOCK, from Eric.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When compiling the kernel with Clang, this warning appears even though
it is disabled for the whole kernel because this folder has its own set
of KBUILD_CFLAGS. It was disabled before the beginning of git history.
In file included from arch/x86/boot/compressed/kaslr.c:29:
In file included from arch/x86/boot/compressed/misc.h:21:
In file included from ./include/linux/elf.h:5:
In file included from ./arch/x86/include/asm/elf.h:77:
In file included from ./arch/x86/include/asm/vdso.h:11:
In file included from ./include/linux/mm_types.h:9:
In file included from ./include/linux/spinlock.h:88:
In file included from ./arch/x86/include/asm/spinlock.h:43:
In file included from ./arch/x86/include/asm/qrwlock.h:6:
./include/asm-generic/qrwlock.h:101:53: warning: passing 'u32 *' (aka
'unsigned int *') to parameter of type 'int *' converts between pointers
to integer types with different sign [-Wpointer-sign]
if (likely(atomic_try_cmpxchg_acquire(&lock->cnts, &cnts, _QW_LOCKED)))
^~~~~
./include/linux/compiler.h:76:40: note: expanded from macro 'likely'
# define likely(x) __builtin_expect(!!(x), 1)
^
./include/asm-generic/atomic-instrumented.h:69:66: note: passing
argument to parameter 'old' here
static __always_inline bool atomic_try_cmpxchg(atomic_t *v, int *old, int new)
^
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20181013010713.6999-1-natechancellor@gmail.com
Clang warns that the declaration of jiffies in include/linux/jiffies.h
doesn't match the definition in arch/x86/time/kernel.c:
arch/x86/kernel/time.c:29:42: warning: section does not match previous declaration [-Wsection]
__visible volatile unsigned long jiffies __cacheline_aligned = INITIAL_JIFFIES;
^
./include/linux/cache.h:49:4: note: expanded from macro '__cacheline_aligned'
__section__(".data..cacheline_aligned")))
^
./include/linux/jiffies.h:81:31: note: previous attribute is here
extern unsigned long volatile __cacheline_aligned_in_smp __jiffy_arch_data jiffies;
^
./arch/x86/include/asm/cache.h:20:2: note: expanded from macro '__cacheline_aligned_in_smp'
__page_aligned_data
^
./include/linux/linkage.h:39:29: note: expanded from macro '__page_aligned_data'
#define __page_aligned_data __section(.data..page_aligned) __aligned(PAGE_SIZE)
^
./include/linux/compiler_attributes.h:233:56: note: expanded from macro '__section'
#define __section(S) __attribute__((__section__(#S)))
^
1 warning generated.
The declaration was changed in commit 7c30f352c8 ("jiffies.h: declare
jiffies and jiffies_64 with ____cacheline_aligned_in_smp") but wasn't
updated here. Make them match so Clang no longer warns.
Fixes: 7c30f352c8 ("jiffies.h: declare jiffies and jiffies_64 with ____cacheline_aligned_in_smp")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181013005311.28617-1-natechancellor@gmail.com
Andi Kleen was just asking me about the NMI CR3 handling and why
we restore it unconditionally. I was *sure* we had documented it
well. We did not.
Add some documentation. We have common entry code where the CR3
value is stashed, but three places in two big code paths where we
restore it. I put bulk of the comments in this common path and
then refer to it from the other spots.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@kernel.org
Cc: bp@alien8.de
Cc: "H. Peter Anvin" <hpa@zytor.come
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20181012232118.3EAAE77B@viggo.jf.intel.com
Eric reported that a sequence count loop using this_cpu_read() got
optimized out. This is wrong, this_cpu_read() must imply READ_ONCE()
because the interface is IRQ-safe, therefore an interrupt can have
changed the per-cpu value.
Fixes: 7c3576d261 ("[PATCH] i386: Convert PDA into the percpu section")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Cc: hpa@zytor.com
Cc: eric.dumazet@gmail.com
Cc: bp@alien8.de
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181011104019.748208519@infradead.org
Looking at the asm for native_sched_clock() I noticed we don't inline
enough. Mostly caused by sharing code with cyc2ns_read_begin(), which
we didn't used to do. So mark all that __force_inline to make it DTRT.
Fixes: 59eaef78bf ("x86/tsc: Remodel cyc2ns to use seqcount_latch()")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: hpa@zytor.com
Cc: eric.dumazet@gmail.com
Cc: bp@alien8.de
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181011104019.695196158@infradead.org
* Fix a livelock in dax_layout_busy_page() present since v4.18. The
lockup triggers when truncating an actively mapped huge page out of a
mapping pinned for direct-I/O.
* Fix mprotect() clobbers of _PAGE_DEVMAP. Broken since v4.5 mprotect()
clears this flag that is needed to communicate the liveness of device
pages to the get_user_pages() path.
-----BEGIN PGP SIGNATURE-----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=VXnU
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-fixes-4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Dan writes:
"libnvdimm/dax 4.19-rc8
* Fix a livelock in dax_layout_busy_page() present since v4.18. The
lockup triggers when truncating an actively mapped huge page out of
a mapping pinned for direct-I/O.
* Fix mprotect() clobbers of _PAGE_DEVMAP. Broken since v4.5
mprotect() clears this flag that is needed to communicate the
liveness of device pages to the get_user_pages() path."
* tag 'libnvdimm-fixes-4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
mm: Preserve _PAGE_DEVMAP across mprotect() calls
filesystem-dax: Fix dax_layout_busy_page() livelock
Wolfram writes:
"i2c fix for 4.19:
I2C has one documentation bugfix for something we changed during the
v4.19 cycle"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: Fix kerneldoc for renamed i2c dma put function
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJbwb17AAoJEL/70l94x66D7SwH+wbyl7DK6vH37m+seZDVWCjd
sLs2ZVf7jqhU4nMwq7SJkUL1N1SGzqj5M2XLcWye6m0tWziTktreAsx9PgdtIuOS
42RmO7G3Tt8JbTu6+Ykysjp5JDaNN4RAjynMsn+G53vBw/QHFSW5xsPE2H/67qi7
83n4IlgFcwgP0mwg5K700J2GH2NWzPU9c0nWHK3HDZORoiF88w7+1bjrDMgfyZMi
K5ZCLshE1Fg5fqHlpQjETqIV1bmd0p5BnUend+8yEUqrb/z16IoNALQMBtW7xFCX
oA6dkAn0pCSyS6kqX+Ut9glrKcN2cmXHvcnT7qIUYvw6Yk3egHH1Gn4uB3cKTGk=
=x9gh
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Paolo writes:
"KVM fixes for 4.19-rc8
Leftover bugfixes."
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: vmx: hyper-v: don't pass EPT configuration info to vmx_hv_remote_flush_tlb()
KVM: x86: support CONFIG_KVM_AMD=y with CONFIG_CRYPTO_DEV_CCP_DD=m
ARM: KVM: Correctly order SGI register entries in the cp15 array
I'm observing random crashes in multi-vCPU L2 guests running on KVM on
Hyper-V. I bisected the issue to the commit 877ad952be ("KVM: vmx: Add
tlb_remote_flush callback support"). Hyper-V TLFS states:
"AddressSpace specifies an address space ID (an EPT PML4 table pointer)"
So apparently, Hyper-V doesn't expect us to pass naked EPTP, only PML4
pointer should be used. Strip off EPT configuration information before
calling into vmx_hv_remote_flush_tlb().
Fixes: 877ad952be ("KVM: vmx: Add tlb_remote_flush callback support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ubifs_assert() is not WARN_ON(), so we have to invert
the checks.
Randy faced this warning with UBIFS being a module, since
most users use UBIFS as builtin because UBIFS is the rootfs
nobody noticed so far. :-(
Including me.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 54169ddd38 ("ubifs: Turn two ubifs_assert() into a WARN_ON()")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On non-preempt kernels this loop can take a long time (more than 50 ticks)
processing through entries.
Link: http://lkml.kernel.org/r/20181010172623.57033-1-khazhy@google.com
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Inside set_pmd_migration_entry() we are holding page table locks and thus
we can not sleep so we can not call invalidate_range_start/end()
So remove call to mmu_notifier_invalidate_range_start/end() because they
are call inside the function calling set_pmd_migration_entry() (see
try_to_unmap_one()).
Link: http://lkml.kernel.org/r/20181012181056.7864-1-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Micay reports that attempting to use MAP_FIXED_NOREPLACE in an
application causes that application to randomly crash. The existing check
for handling MAP_FIXED_NOREPLACE looks up the first VMA that either
overlaps or follows the requested region, and then bails out if that VMA
overlaps *the start* of the requested region. It does not bail out if the
VMA only overlaps another part of the requested region.
Fix it by checking that the found VMA only starts at or after the end of
the requested region, in which case there is no overlap.
Test case:
user@debian:~$ cat mmap_fixed_simple.c
#include <sys/mman.h>
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#ifndef MAP_FIXED_NOREPLACE
#define MAP_FIXED_NOREPLACE 0x100000
#endif
int main(void) {
char *p;
errno = 0;
p = mmap((void*)0x10001000, 0x4000, PROT_NONE,
MAP_PRIVATE|MAP_ANONYMOUS|MAP_FIXED_NOREPLACE, -1, 0);
printf("p1=%p err=%m\n", p);
errno = 0;
p = mmap((void*)0x10000000, 0x2000, PROT_READ,
MAP_PRIVATE|MAP_ANONYMOUS|MAP_FIXED_NOREPLACE, -1, 0);
printf("p2=%p err=%m\n", p);
char cmd[100];
sprintf(cmd, "cat /proc/%d/maps", getpid());
system(cmd);
return 0;
}
user@debian:~$ gcc -o mmap_fixed_simple mmap_fixed_simple.c
user@debian:~$ ./mmap_fixed_simple
p1=0x10001000 err=Success
p2=0x10000000 err=Success
10000000-10002000 r--p 00000000 00:00 0
10002000-10005000 ---p 00000000 00:00 0
564a9a06f000-564a9a070000 r-xp 00000000 fe:01 264004
/home/user/mmap_fixed_simple
564a9a26f000-564a9a270000 r--p 00000000 fe:01 264004
/home/user/mmap_fixed_simple
564a9a270000-564a9a271000 rw-p 00001000 fe:01 264004
/home/user/mmap_fixed_simple
564a9a54a000-564a9a56b000 rw-p 00000000 00:00 0 [heap]
7f8eba447000-7f8eba5dc000 r-xp 00000000 fe:01 405885
/lib/x86_64-linux-gnu/libc-2.24.so
7f8eba5dc000-7f8eba7dc000 ---p 00195000 fe:01 405885
/lib/x86_64-linux-gnu/libc-2.24.so
7f8eba7dc000-7f8eba7e0000 r--p 00195000 fe:01 405885
/lib/x86_64-linux-gnu/libc-2.24.so
7f8eba7e0000-7f8eba7e2000 rw-p 00199000 fe:01 405885
/lib/x86_64-linux-gnu/libc-2.24.so
7f8eba7e2000-7f8eba7e6000 rw-p 00000000 00:00 0
7f8eba7e6000-7f8eba809000 r-xp 00000000 fe:01 405876
/lib/x86_64-linux-gnu/ld-2.24.so
7f8eba9e9000-7f8eba9eb000 rw-p 00000000 00:00 0
7f8ebaa06000-7f8ebaa09000 rw-p 00000000 00:00 0
7f8ebaa09000-7f8ebaa0a000 r--p 00023000 fe:01 405876
/lib/x86_64-linux-gnu/ld-2.24.so
7f8ebaa0a000-7f8ebaa0b000 rw-p 00024000 fe:01 405876
/lib/x86_64-linux-gnu/ld-2.24.so
7f8ebaa0b000-7f8ebaa0c000 rw-p 00000000 00:00 0
7ffcc99fa000-7ffcc9a1b000 rw-p 00000000 00:00 0 [stack]
7ffcc9b44000-7ffcc9b47000 r--p 00000000 00:00 0 [vvar]
7ffcc9b47000-7ffcc9b49000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0
[vsyscall]
user@debian:~$ uname -a
Linux debian 4.19.0-rc6+ #181 SMP Wed Oct 3 23:43:42 CEST 2018 x86_64 GNU/Linux
user@debian:~$
As you can see, the first page of the mapping at 0x10001000 was clobbered.
Link: http://lkml.kernel.org/r/20181010152736.99475-1-jannh@google.com
Fixes: a4ff8e8620 ("mm: introduce MAP_FIXED_NOREPLACE")
Signed-off-by: Jann Horn <jannh@google.com>
Reported-by: Daniel Micay <danielmicay@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following compile warning:
fs/ocfs2/dlmglue.c:99:30: warning: lockdep_keys defined but not used [-Wunused-variable]
static struct lock_class_key lockdep_keys[OCFS2_NUM_LOCK_TYPES];
Link: http://lkml.kernel.org/r/1536938148-32110-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=UGgm
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20181012' of git://git.kernel.dk/linux-block
Jens writes:
"block fix for 4.19-rc
Just a single fix that should go in, fixing a regression introduced
in the blk-wbt code."
* tag 'for-linus-20181012' of git://git.kernel.dk/linux-block:
blk-wbt: wake up all when we scale up, not down
- Reject CHAIN PMU events when they are not part of a 64-bit counter
- Fix WARN_ON_ONCE() that triggers for reserved regions that don't
correspond to mapped memory
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJbwLRMAAoJELescNyEwWM0vvYIAIzR2zOm3dIXXP+ZF16jcJJn
tfHtAgzPDvflnnVYc0r1/vAfD7yfF7kpAVZ/xe9hwVfBeXkBxF3oIDSVOdPxRQtW
woZ/Ld6OaN3A2Ev2lBZodJvgBdUUYvXJHAgfFSWfEz9cTTmCF87npRpLj4WEJgXv
CGaC6ffX4eWHGHUE6hdNLNOdTeLDSfvXjBkVSL1uAodE62fvJRv5DzlGNCMO9OyB
7cAt4uD3u57C3b0IObSNeoYrtABbBw+2wpMHcqZ1zrgUOEyZa7bhJtNgKv5b9Krn
LUEW5+clpNG+dsha2gFBekbgaudGYYyW1chYSXDquVmiyemU3oa+Vgc8XeFGcZ8=
=K6MO
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Will writes:
"More arm64 fixes
- Reject CHAIN PMU events when they are not part of a 64-bit counter
- Fix WARN_ON_ONCE() that triggers for reserved regions that don't
correspond to mapped memory"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: perf: Reject stand-alone CHAIN events for PMUv3
arm64: Fix /proc/iomem for reserved but not memory regions
It is important to clear the hw->state value for non-stopped events
when they are added into the PMU. Otherwise when the event is
scheduled out, we won't read the counter because HES_UPTODATE is still
set. This breaks 'perf stat' and similar use cases, causing all the
events to show zero.
This worked for multi-pcr because we make explicit sparc_pmu_start()
calls in calculate_multiple_pcrs(). calculate_single_pcr() doesn't do
this because the idea there is to accumulate all of the counter
settings into the single pcr value. So we have to add explicit
hw->state handling there.
Like x86, we use the PERF_HES_ARCH bit to track truly stopped events
so that we don't accidently start them on a reload.
Related to all of this, sparc_pmu_start() is missing a userpage update
so add it.
Signed-off-by: David S. Miller <davem@davemloft.net>
