The virtual driver has now a minimal set of frequencies for a
single transponder to be found by each DVB standard.
Document it, and update related information about the
simulated LNBf.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add menu control for VP9 codec levels. A total of 14 levels are
defined for Profile 0 (8bit) and Profile 2 (10bit). Each level
is a set of constrained bitstreams coded with targeted resolutions,
frame rates, and bitrates.
The definitions have been taken from webm project [1].
[1] https://www.webmproject.org/vp9/levels/
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add documentation for the Virtual Digital TV driver (vidtv) in the
Restructured Text (ReST) format.
This discusses:
- What is vidtv
- Why vidtv is needed
- How to build and run vidtv
- How vidtv is structured
- How to test vidtv
- How to improve vidtv
[mchehab: fixed bad whitespaces]
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To quote the TODO of this driver:
--------------------------------------------------------------
The driver is deprecated and scheduled for removal by the end
of 2020.
In order to prevent removal the following actions would have to
be taken:
- clean up the code
- convert to the vb2 framework
- fix the disconnect and free-on-last-user handling (i.e., add
a release callback for struct v4l2_device and rework the code
to use that correctly).
--------------------------------------------------------------
Nobody picked this up, so it's time to retire this driver.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9VerweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhc4H/iHD6qLdB36gZB6K
oc2nJyrqyWitv4ti2Mnt5PA7o4wX4l6nnr1QvoaJ4BRs5Ja1czRvb2XDmdzqAoIA
xITGoafqaAeDfxQ91bWrJsVN0pCRKiGwddXlU7TWmqw/riAkfOqi6GYKvav4biJH
+n1mUPQb1M2IbRFsqkAS+ebKHq3CWaRvzKOEneS88nGlL5u31S9NAru8Ru/fkxRn
6CwGcs1XRaBPYaZAhdfIb0NuatUlpkhPC9yhNS9up6SqrWmK3m65vmFVng6H0eCF
fwn1jVztboY/XcNAi5sM9ExpQCql6WLQEEktVikqRDojC8fVtSx6W55tPt7qeaoO
Z6t4/DA=
=bcA4
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rc4' into patchwork
Linux 5.9-rc4
* tag 'v5.9-rc4': (1001 commits)
Linux 5.9-rc4
io_uring: fix linked deferred ->files cancellation
io_uring: fix cancel of deferred reqs with ->files
include/linux/log2.h: add missing () around n in roundup_pow_of_two()
mm/khugepaged.c: fix khugepaged's request size in collapse_file
mm/hugetlb: fix a race between hugetlb sysctl handlers
mm/hugetlb: try preferred node first when alloc gigantic page from cma
mm/migrate: preserve soft dirty in remove_migration_pte()
mm/migrate: remove unnecessary is_zone_device_page() check
mm/rmap: fixup copying of soft dirty and uffd ptes
mm/migrate: fixup setting UFFD_WP flag
mm: madvise: fix vma user-after-free
checkpatch: fix the usage of capture group ( ... )
fork: adjust sysctl_max_threads definition to match prototype
ipc: adjust proc_ipc_sem_dointvec definition to match prototype
mm: track page table modifications in __apply_to_page_range()
MAINTAINERS: IA64: mark Status as Odd Fixes only
MAINTAINERS: add LLVM maintainers
MAINTAINERS: update Cavium/Marvell entries
mm: slub: fix conversion of freelist_corrupted()
...
- Fix reference counting of operating performance points (OPP)
tables (Viresh Kumar).
- Address intel_pstate driver interface issues, mostly related
to switching operation modes and handling CPU offline and
online and system-wide suspend/resume with hardware-managed
P-states (HWP) enabled (Rafael Wysocki).
- Fix the maximum frequency computation in the intel_pstate driver
with turbo P-states disabled by the platform firmware and HWP
enabled (Francisco Jerez).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl9Sb3YSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxI3YP/iPLm1zudatHLFr44A5cPNyKd0VI4Wh7
7wTLZNFuHs69ivRjC77BJGULDoDJopas6GArkWdh0G+nqQo8SM18RinxA+13DEl5
7tIrkIWv0gJW/7jZp5mpqjkKNOQ+zH0aw5zaHfiQKVrb6lZJdULbWTpAmr5miCim
qbs4Umvo/4Nshxj46N6CT82kSbElwCCAfFcXheYaplirfZmluuH9+Zd/rKQCoyCv
zXP+T/YV+U2siCOyjaSToDvnoep2qNwl4ZSRPKYCvqKr1B9u+Rp4psdjMuUixnum
Qs+57EudxLyHfaXhMR/ua/XhKf2ZUFZT7ClJeKCR5nzl7bzp6oy+TaljZVsvG0b1
pPiGZKs9JRXovweriWkhUtHaEpND/AMwqnYH3ZBbc1eL65EM0ljWIINDN0oWD9Xa
5a8Z1nsaD66VnHfWaOlKMQhBH7YLxACUqRo/+D2hgx+cHxUP5CqfgpUsV3Cb7c1J
GsmvMJwQ6/wmfCShRJniqBhoUecBCL+U7Tw1c4suDyMz8iVEMh9C5pZNsd0nWt5r
I7O+s/HPRDW/01Wew3cM2h0ib+y0pQIx+jaktrECXutgejv47oH01CAZrm2j5Ie7
Bqb+GOmJKdPInXrdgz59mCSic1rO8rb49dRvCxCMx/jsnwcwG1x+o86fuLgZUzKA
R7JJd7VQg2wP
=gsKc
-----END PGP SIGNATURE-----
Merge tag 'pm-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix reference counting in the operating performance points (OPP)
framework and address a few intel_pstate driver issues, mostly related
to switching driver operation modes and similar with hardware-managed
P-states (HWP) enabled.
Specifics:
- Fix reference counting of operating performance points (OPP) tables
(Viresh Kumar).
- Address intel_pstate driver interface issues, mostly related to
switching operation modes and handling CPU offline and online and
system-wide suspend/resume with hardware-managed P-states (HWP)
enabled (Rafael Wysocki).
- Fix the maximum frequency computation in the intel_pstate driver
with turbo P-states disabled by the platform firmware and HWP
enabled (Francisco Jerez)"
* tag 'pm-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled
cpufreq: intel_pstate: Free memory only when turning off
cpufreq: intel_pstate: Add ->offline and ->online callbacks
cpufreq: intel_pstate: Tweak the EPP sysfs interface
cpufreq: intel_pstate: Update cached EPP in the active mode
cpufreq: intel_pstate: Refuse to turn off with HWP enabled
opp: Don't drop reference for an OPP table that was never parsed
A collection of small changes, nothing intrusive:
* Remaining tasklet API conversions, now all sound stuff have been
converted
* A few HD-audio and USB-audio quirks and minor fixes
* FireWire Tascam and Digi00xx fixes
* Drop of kernel WARNING from PCM OSS for syzkaller
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAl9R8ckOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE+Dtg//ShtXFp622T5NiMvDF5sG8AlbvGLf1dUdja62
6sF2kba9vhncI9ejjGSJBCdfun3dtNkjsffacKOzTbnSHbwsBjU7J68zP1dru+d2
88WXb4h8iAxAPcPHSgblpdi+ifeKGEYsAr7tbVa5KIpFKDxW7qLw5ntXu0G0vuW3
+ao/p3TB/LT5I42bu0UmXsfuO7dVoyyzOSDdlse0mFNNeNSLVslAkaqqYSosmp1/
I2gPyP814OwqrPITGvlnDWLfCnuTVDQodtAYb6sADPpplBTGu4uVfJUD+w6xVNDX
2byY6Q2TYYolrBUSvsPxUSXAfogvGQFppOnpbxnZftIrDoFC8WN048vWEfYZ2CWn
bVDQmErqAk8+l3r8kllW6IXhJxF2CMivv92Ht+8VA4sw29RVGtUXw6Gm7aJvoqP3
zewF7RZh6vNJVsjAv4KEpYTyNLQi9eYCygeB9INA7dWBZeyaolchX1Ptrd4fhyo7
ko20Fbu+vuk18B9zNE5yIpBKNpqDVNyTCnZSU9kzCicVZ/OD15fw/sUXUVo3wx5X
ZRLBdJrccXni+LlbYHT6tJPtnQtBHITffN2/zvGPPXlViLexz88jtqWaTayy4J1u
L63BIA3L8IfAW1ln22CfNlKbwN+Ku1uJwJnPHiUPDABXH6Uk2oeCxI5BRLzyTieB
oe1jrcs=
=CwOB
-----END PGP SIGNATURE-----
Merge tag 'sound-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small changes, nothing intrusive:
- remaining tasklet API conversions, now all sound stuff have been
converted
- a few HD-audio and USB-audio quirks and minor fixes
- FireWire Tascam and Digi00xx fixes
- drop a kernel WARNING from PCM OSS for syzkaller"
* tag 'sound-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits)
ALSA: hda/realtek - Improved routing for Thinkpad X1 7th/8th Gen
ALSA: hda: use consistent HDAudio spelling in comments/docs
ALSA: hda: add dev_dbg log when driver is not selected
ALSA: hda: fix a runtime pm issue in SOF when integrated GPU is disabled
ALSA: hda: hdmi - add Rocketlake support
ALSA: ua101: convert tasklets to use new tasklet_setup() API
ALSA: usb-audio: convert tasklets to use new tasklet_setup() API
ASoC: txx9: convert tasklets to use new tasklet_setup() API
ASoC: siu: convert tasklets to use new tasklet_setup() API
ASoC: fsl_esai: convert tasklets to use new tasklet_setup() API
ALSA: hdsp: convert tasklets to use new tasklet_setup() API
ALSA: riptide: convert tasklets to use new tasklet_setup() API
ALSA: pci/asihpi: convert tasklets to use new tasklet_setup() API
ALSA: firewire: convert tasklets to use new tasklet_setup() API
ALSA: core: convert tasklets to use new tasklet_setup() API
ALSA: pcm: oss: Remove superfluous WARN_ON() for mulaw sanity check
ALSA: hda - Fix silent audio output and corrupted input on MSI X570-A PRO
ALSA: hda/hdmi: always check pin power status in i915 pin fixup
ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion NT950XCJ-X716A
ALSA: usb-audio: Add basic capture support for Pioneer DJ DJM-250MK2
...
Pull networking fixes from David Miller:
1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi
Kivilinna.
2) Fix loss of RTT samples in rxrpc, from David Howells.
3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu.
4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka.
5) We disable BH for too lokng in sctp_get_port_local(), add a
cond_resched() here as well, from Xin Long.
6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu.
7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from
Yonghong Song.
8) Missing of_node_put() in mt7530 DSA driver, from Sumera
Priyadarsini.
9) Fix crash in bnxt_fw_reset_task(), from Michael Chan.
10) Fix geneve tunnel checksumming bug in hns3, from Yi Li.
11) Memory leak in rxkad_verify_response, from Dinghao Liu.
12) In tipc, don't use smp_processor_id() in preemptible context. From
Tuong Lien.
13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu.
14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter.
15) Fix ABI mismatch between driver and firmware in nfp, from Louis
Peens.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits)
net/smc: fix sock refcounting in case of termination
net/smc: reset sndbuf_desc if freed
net/smc: set rx_off for SMCR explicitly
net/smc: fix toleration of fake add_link messages
tg3: Fix soft lockup when tg3_reset_task() fails.
doc: net: dsa: Fix typo in config code sample
net: dp83867: Fix WoL SecureOn password
nfp: flower: fix ABI mismatch between driver and firmware
tipc: fix shutdown() of connectionless socket
ipv6: Fix sysctl max for fib_multipath_hash_policy
drivers/net/wan/hdlc: Change the default of hard_header_len to 0
net: gemini: Fix another missing clk_disable_unprepare() in probe
net: bcmgenet: fix mask check in bcmgenet_validate_flow()
amd-xgbe: Add support for new port mode
net: usb: dm9601: Add USB ID of Keenetic Plus DSL
vhost: fix typo in error message
net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()
pktgen: fix error message with wrong function name
net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode
cxgb4: fix thermal zone device registration
...
In the "single port" example code for configuring a DSA switch without
tagging support from userspace the command to bring up the "lan2" link
was typo'd.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=lVnf
-----END PGP SIGNATURE-----
Merge tag 'affs-for-5.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull affs fix from David Sterba:
"One fix to make permissions work the same way as on AmigaOS"
* tag 'affs-for-5.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
affs: fix basic permission bits to actually work
This is a general cleanup of kbuild/makefiles.rst:
* Use "Chapter" for major heading references and use "section" for
the next-level heading references, for consistency.
* Section 3.8 was deleted long ago.
* Drop the ending ':' in section names in the contents list.
* Correct some section numbering references.
* Correct verb agreement typo.
* Fix run-on sentence punctuation.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
We use HDaudio and HDAudio, pick one to make searches easier.
No functionality change
Also fix timestamping typo in documentation.
Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902154250.1440585-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Modify the EPP sysfs interface to reject attempts to change the EPP
to values different from 0 ("performance") in the active mode with
the "performance" policy (ie. scaling_governor set to "performance"),
to avoid situations in which the kernel appears to discard data
passed to it via the EPP sysfs attribute.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
When we added support for omap3, back in 2010, we added a new
type of V4L2 devices that aren't fully controlled via the V4L2
device node.
Yet, we have never clearly documented in the V4L2 specification
the differences between the two types.
Let's document them based on the the current implementation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a glossary of terms used within the media userspace API
documentation, as several concepts are complex enough to cause
misunderstandings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
minor numbers use to range between 0 to 255, but that
was changed a long time ago. While it still applies when
CONFIG_VIDEO_FIXED_MINOR_RANGES, when the minor number is
dynamically allocated, this may not be true. In any case,
this is not relevant, as udev will take care of it.
So, remove this useless misinformation.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Right now, only kAPI documentation describes the device naming.
However, such description is needed at the uAPI too. Add it,
and describe how to get an unique identifier for a given device.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are some files that are dual licensed GPL and GFDL.
As SPDX v3.10 gained support for GFDL-1.1 with no invariant sections:
https://spdx.org/licenses/GFDL-1.1-no-invariants-or-later.html
Let's remove the dual license text, replacing them by:
SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are some files that are dual licensed GPL and GFDL.
As SPDX v3.10 gained support for GFDL-1.1 with no invariant sections:
https://spdx.org/licenses/GFDL-1.1-no-invariants-or-later.html
Let's remove the dual license text, replacing them by:
SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
SPDX v3.10 gained support for GFDL-1.1 with no invariant sections:
https://spdx.org/licenses/GFDL-1.1-no-invariants-or-later.html
So, remove the license text, replacing them by this new SPDX license.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
SPDX v3.10 gained support for GFDL-1.1 with no invariant sections:
https://spdx.org/licenses/GFDL-1.1-no-invariants-or-later.html
So, remove the license text, replacing them by this new SPDX
license.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Deprecate mfc private frame skip mode control for new
clients and use the standard one instead.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Adds encoders standard v4l2 control for frame-skip. The control
is a copy of a custom encoder control so that other v4l2 encoder
drivers can use it.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When V4L2_CID_MPEG_VIDEO_BITRATE_MODE value is
V4L2_MPEG_VIDEO_BITRATE_MODE_CQ, encoder will produce
constant quality output indicated by
V4L2_CID_MPEG_VIDEO_CONSTANT_QUALITY control value.
Encoder will choose appropriate quantization parameter
and bitrate to produce requested frame quality level.
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Applications are expected to fill V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX
if a non-flat scaling matrix applies to the picture. This is the case if
SPS scaling_matrix_present_flag or PPS pic_scaling_matrix_present_flag
are set, and should be handled by applications.
On one hand, the PPS bitstream syntax element signals the presence of a
Picture scaling matrix modifying the Sequence (SPS) scaling matrix.
On the other hand, our flag should indicate if the scaling matrix
V4L2 control is applicable to this request.
Rename the flag from PPS_FLAG_PIC_SCALING_MATRIX_PRESENT to
PPS_FLAG_SCALING_MATRIX_PRESENT, to avoid mixing this flag with
bitstream syntax element pic_scaling_matrix_present_flag,
and clarify the meaning of our flag.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The H.264 specification requires in section 7.4.3 "Slice header semantics",
that the following values shall be the same in all slice headers:
pic_parameter_set_id
frame_num
field_pic_flag
bottom_field_flag
idr_pic_id
pic_order_cnt_lsb
delta_pic_order_cnt_bottom
delta_pic_order_cnt[ 0 ]
delta_pic_order_cnt[ 1 ]
sp_for_switch_flag
slice_group_change_cycle
These bitstream fields are part of the slice header, and therefore
passed redundantly on each slice. The purpose of the redundancy
is to make the codec fault-tolerant in network scenarios.
This is of course not needed to be reflected in the V4L2 controls,
given the bitstream has already been parsed by applications.
Therefore, move the redundant fields to the per-frame decode
parameters control (DECODE_PARAMS).
Field 'pic_parameter_set_id' is simply removed in this case,
because the PPS control must currently contain the active PPS.
Syntax elements dec_ref_pic_marking() and those related
to pic order count, remain invariant as well, and therefore,
the fields dec_ref_pic_marking_bit_size and pic_order_cnt_bit_size
are also common to all slices.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently, the SLICE_BASED and FRAME_BASED modes documentation
is misleading and not matching the intended use-cases.
Drop non-required fields SLICE_PARAMS 'start_byte_offset' and
DECODE_PARAMS 'num_slices' and clarify the decoding modes in the
documentation.
On SLICE_BASED mode, a single slice is expected per OUTPUT buffer,
and therefore 'start_byte_offset' is not needed (since the offset
to the slice is the start of the buffer).
This mode requires the use of CAPTURE buffer holding, and so
the number of slices shall not be required.
On FRAME_BASED mode, the devices are expected to take care of slice
parsing. Neither SLICE_PARAMS are required (and shouldn't be
exposed by frame-based drivers), nor the number of slices.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The SLICE_PARAMS control is intended for slice-based
devices. In this mode, the OUTPUT buffer contains
a single slice, and so the buffer's plane payload size
can be used to query the slice size.
To reduce the API surface drop the size from the
SLICE_PARAMS control.
A follow-up change will remove other members in SLICE_PARAMS
so we don't need to add padding fields here.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
DPB entry PicNum maximum value is 2*MaxFrameNum for interlaced
content (field_pic_flag=1).
As specified, MaxFrameNum is 2^(log2_max_frame_num_minus4 + 4)
and log2_max_frame_num_minus4 is in the range of 0 to 12,
which means pic_num should be a 32-bit field.
The v4l2_h264_dpb_entry struct needs to be padded to avoid a hole,
which might be also useful to allow future uAPI extensions.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As discussed recently, the current interface for the
Decoded Picture Buffer is not enough to properly
support field coding.
This commit introduces enough semantics to support
frame and field coding, and to signal how DPB entries
are "used for reference".
Reserved fields will be added by a follow-up commit.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Slice header syntax element 'first_mb_in_slice' can point
to the last macroblock, currently the field can only reference
65536 macroblocks which is insufficient for 8K videos.
Although unlikely, a 8192x4320 video (where macroblocks are 16x16),
would contain 138240 macroblocks on a frame.
As per the H264 specification, 'first_mb_in_slice' can be up to
PicSizeInMbs - 1, so increase the size of the field to 32-bits.
Note that v4l2_ctrl_h264_slice_params struct will be modified
in a follow-up commit, and so we defer its 64-bit padding.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Since pic_order_cnt_bit_size is not a syntax element itself, explicitly
state that it is the total size in bits of the pic_order_cnt_lsb,
delta_pic_order_cnt_bottom, delta_pic_order_cnt[0], and
delta_pic_order_cnt[1] syntax elements contained in the slice.
[Ezequiel: rebase]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The prediction weight parameters are only required under
certain conditions, which depend on slice header parameters.
As specified in section 7.3.3 Slice header syntax, the prediction
weight table is present if:
((weighted_pred_flag && (slice_type == P || slice_type == SP)) || \
(weighted_bipred_idc == 1 && slice_type == B))
Given its size, it makes sense to move this table to its control,
so applications can avoid passing it if the slice doesn't specify it.
Before this change struct v4l2_ctrl_h264_slice_params was 960 bytes.
With this change, it's 188 bytes and struct v4l2_ctrl_h264_pred_weight
is 772 bytes.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit 0b0393d59e ("media: uapi: h264: clarify
expected scaling_list_4x4/8x8 order") improved the
documentation on H264 scaling lists order.
This commit improves the documentation by clarifying
that the lists themselves are expected in raster scan order.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When dealing with interlaced frames, reference lists must tell if
each particular reference is meant for top or bottom field. This info
is currently not provided at all in the H264 related controls.
Change reference lists to hold a structure, which specifies
an index into the DPB array and the field/frame specification
for the picture.
Currently the only user of these lists is Cedrus which is just compile
fixed here. Actual usage of will come in a following commit.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
While we have had some example drivers, there has been up to date no
formal documentation on how camera sensor drivers should be written; what
are the practices, why, and where they apply.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix improper line breaks and format all example yavta and media-ctl
commands as code blocks to improve readability.
Signed-off-by: Jordan Hand <jorhand@linux.microsoft.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Document in dt-schema bindings for the ov5647 sensor the optional
'pwdn-gpios' property.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The parallel port nodes should be numbered 1 and 2, not 0 and 1
for A and B respectively. The driver has always implemented 1
and 2 and the in-tree Goni DTS uses 1 as port A as well. Update
the documentation to match this behaviour.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
While reviewing a separate patch, I noticed that the formatting of the
commands, variables, and arguments was not in a monospaced font like the
rest of the Kbuild documentation (see kbuild/kconfig.rst for an
example). This is due to a lack of "::" before indented command blocks
and single backticks instead of double backticks for inline formatting.
Add those so that the document looks nicer in an HTML format, while not
ruining the look in plain text.
As a result of this, we can remove the escaped backslashes in the last
code block and move them to single backslashes.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The basic permission bits (protection bits in AmigaOS) have been broken
in Linux' AFFS - it would only set bits, but never delete them.
Also, contrary to the documentation, the Archived bit was not handled.
Let's fix this for good, and set the bits such that Linux and classic
AmigaOS can coexist in the most peaceful manner.
Also, update the documentation to represent the current state of things.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: David Sterba <dsterba@suse.com>
- Revert the platform driver conversion of interrupt chip drivers as it
turned out to create more problems than it solves.
- Fix a trivial typo in the new module helpers which made probing reliably
fail.
- Small fixes in the STM32 and MIPS Ingenic drivers
- The TI firmware rework which had badly managed dependencies and had to
wait post rc1.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl9L4wITHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYobWiEACmMdJl1ZHC+IcKzAVngX82rJUQ/4dC
zGBRnddkPYjobXpK+w+W28vdPHYcGZ4de89X1N0l6zocSRQh2NdmJ080ivH8LD/V
AaT82Sf8mjuulUPolyfiF09+e4OeBUC94CsyM2LkGmicoMLeWyWv4EEh95anh3s9
GsaZ6cW6Cvq1whK2SSCoa5V1pkCGLIMxw2gV4DDw/s2RuqwrIGeleq9bcMNA8RVS
eBF91N6nUpXI9PMS68p72ZcRbpK0cKTARt99lS4cDEOS11b0jsRxZ525Xem736V/
5zgXvYOdErZaBRO3WeSaxlYTwwRiLKTRNOL4ZFgI1xQEK4Pcv9S+80zaXSvDXSsn
s6LzXYifgPCE6edIXKAMwcNcbRXcGdn4PZpSTwvtNJpbVskRQgPmtEVDUD+J5upU
7NN/myosEkA5JUQSWdaaaa4nLe4H8qmxnQrn+B41NzzikekZuN+ai9OAOTTdsv1j
W+hNhX78qgVbYtm4/8mOQp4BAIOIGPDTgw3WfXYW3FbecEM6EQBEQgT9E1RCivTX
cETaV34jJY7XGm3iVQ97jLsKBhK0lcIfJwltuY1Ck+4o9fqZkJ0iZ045EArJMms6
sG+tp6+0MWPkLf2P31qdLKTMt/9HZCHao7F1K6Fz218k4mwGHa12V/OUgPkdr8vJ
hb57EF+zXOaFag==
=guRc
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Revert the platform driver conversion of interrupt chip drivers as
it turned out to create more problems than it solves.
- Fix a trivial typo in the new module helpers which made probing
reliably fail.
- Small fixes in the STM32 and MIPS Ingenic drivers
- The TI firmware rework which had badly managed dependencies and had
to wait post rc1"
* tag 'irq-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ingenic: Leave parent IRQ unmasked on suspend
irqchip/stm32-exti: Avoid losing interrupts due to clearing pending bits by mistake
irqchip: Revert modular support for drivers using IRQCHIP_PLATFORM_DRIVER helperse
irqchip: Fix probing deferal when using IRQCHIP_PLATFORM_DRIVER helpers
arm64: dts: k3-am65: Update the RM resource types
arm64: dts: k3-am65: ti-sci-inta/intr: Update to latest bindings
arm64: dts: k3-j721e: ti-sci-inta/intr: Update to latest bindings
irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC
irqchip/ti-sci-inta: Do not store TISCI device id in platform device id field
dt-bindings: irqchip: Convert ti, sci-inta bindings to yaml
dt-bindings: irqchip: ti, sci-inta: Update docs to support different parent.
irqchip/ti-sci-intr: Add support for INTR being a parent to INTR
dt-bindings: irqchip: Convert ti, sci-intr bindings to yaml
dt-bindings: irqchip: ti, sci-intr: Update bindings to drop the usage of gic as parent
firmware: ti_sci: Add support for getting resource with subtype
firmware: ti_sci: Drop unused structure ti_sci_rm_type_map
firmware: ti_sci: Drop the device id to resource type translation
Revert our removal of PROT_SAO, at least one user expressed an interest in using
it on Power9. Instead don't allow it to be used in guests unless enabled
explicitly at compile time.
A fix for a crash introduced by a recent change to FP handling.
Revert a change to our idle code that left Power10 with no idle support.
One minor fix for the new scv system call path to set PPR.
Fix a crash in our "generic" PMU if branch stack events were enabled.
A fix for the IMC PMU, to correctly identify host kernel samples.
The ADB_PMU powermac code was found to be incompatible with VMAP_STACK, so make
them incompatible in Kconfig until the code can be fixed.
A build fix in drivers/video/fbdev/controlfb.c, and a documentation fix.
Thanks to:
Alexey Kardashevskiy, Athira Rajeev, Christophe Leroy, Giuseppe Sacco,
Madhavan Srinivasan, Milton Miller, Nicholas Piggin, Pratik Rajesh Sampat,
Randy Dunlap, Shawn Anastasio, Vaidyanathan Srinivasan.
-----BEGIN PGP SIGNATURE-----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=t+yB
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Revert our removal of PROT_SAO, at least one user expressed an
interest in using it on Power9. Instead don't allow it to be used in
guests unless enabled explicitly at compile time.
- A fix for a crash introduced by a recent change to FP handling.
- Revert a change to our idle code that left Power10 with no idle
support.
- One minor fix for the new scv system call path to set PPR.
- Fix a crash in our "generic" PMU if branch stack events were enabled.
- A fix for the IMC PMU, to correctly identify host kernel samples.
- The ADB_PMU powermac code was found to be incompatible with
VMAP_STACK, so make them incompatible in Kconfig until the code can
be fixed.
- A build fix in drivers/video/fbdev/controlfb.c, and a documentation
fix.
Thanks to Alexey Kardashevskiy, Athira Rajeev, Christophe Leroy,
Giuseppe Sacco, Madhavan Srinivasan, Milton Miller, Nicholas Piggin,
Pratik Rajesh Sampat, Randy Dunlap, Shawn Anastasio, Vaidyanathan
Srinivasan.
* tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU
Revert "powerpc/powernv/idle: Replace CPU feature check with PVR check"
powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imc
powerpc/perf: Fix crashes with generic_compat_pmu & BHRB
powerpc/64s: Fix crash in load_fp_state() due to fpexc_mode
powerpc/64s: scv entry should set PPR
Documentation/powerpc: fix malformed table in syscall64-abi
video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=n
selftests/powerpc: Update PROT_SAO test to skip ISA 3.1
powerpc/64s: Disallow PROT_SAO in LPARs by default
Revert "powerpc/64s: Remove PROT_SAO support"
