A recent attempt to fix a ref count leak in
amdgpu_display_crtc_set_config() turned out to be doing too much and
"fixed" an intended decrease as if it were a leak. Undo that part to
restore the proper balance. This is the very nature of this function
to increase or decrease the power reference count depending on the
situation.
Consequences of this bug is that the power reference would
eventually get down to 0 while the display was still in use,
resulting in that display switching off unexpectedly.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: e008fa6fb4 ("drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config")
Cc: stable@vger.kernel.org
Cc: Navid Emamdoost <navid.emamdoost@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Properly handle clang and older versions of gcc.
Fixes: e77165bf7b ("drm/amd/display: Add DCN3 blocks to Makefile")
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove gpu_info fw support for sienna_cichlid etc., since the
information can be retrieved from discovery binary.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU10_UMD_PSTATE_PEAK_FCLK value should not be used to set the DPM.
Suggested-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When building with
$ HOST_EXTRACFLAGS=-g make
the expectation is that host tools are built with debug informations.
This however doesn't happen if the Makefile assigns a new value to the
HOST_EXTRACFLAGS instead of appending to it. So use += instead of := for
the first assignment.
Fixes: e3fd9b5384 ("scripts/dtc: consolidate include path options in Makefile")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
The default sizes in examples for 'reg' are 1 cell each. Fix the
incorrect sizes in zynqmp examples:
Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.example.dt.yaml: example-0: dma-controller@fd4c0000:reg:0: [0, 4249616384, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:0: [0, 4249485312, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:1: [0, 4249526272, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:2: [0, 4249530368, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:3: [0, 4249534464, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Cc: Hyun Kwon <hyun.kwon@xilinx.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: dmaengine@vger.kernel.org
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
A couple of last minute fixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl9sbPMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpfD0H/1x51oiUpXlC2VcV8Bu3EsyGxFMGWm4BPikR
XKlFlOdn0rksbpNe+3ie2eKv+o5ckmAGiqtB19O6kk1wDFTAvKBMjWItxoD560F8
AFYF6hD2qKnfcCXyS9TtJjCMkH6D+RplPxTQHEztBeh603usip8j2kcesMmNQD75
QECwXILQmivyXJ/HyBfGwij78QQNXWnHaUs+PszGLL5I0gNbBdE9TbeRVpTRph34
swvihfryYhZct3BFmAHp32c3oNJ7FOLlmqJoYenpkO6+SY/1OqJkRGVGH2BS5tC2
M87E423bggcpWIfYxKbmaGZwmxumwZEF7pBhEUdGI1wi2BuKEXQ=
=lzv1
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"A couple of last minute fixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: fix backend feature ioctls
vhost: Fix documentation
The first thing that the ftrace function callback helper functions should do
is to check for recursion. Peter Zijlstra found that when
"rcu_is_watching()" had its notrace removed, it caused perf function tracing
to crash. This is because the call of rcu_is_watching() is tested before
function recursion is checked and and if it is traced, it will cause an
infinite recursion loop.
rcu_is_watching() should still stay notrace, but to prevent this should
never had crashed in the first place. The recursion prevention must be the
first thing done in callback functions.
Link: https://lore.kernel.org/r/20200929112541.GM2628@hirez.programming.kicks-ass.net
Cc: stable@vger.kernel.org
Cc: Paul McKenney <paulmck@kernel.org>
Fixes: c68c0fa293 ("ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The temp buffer size variable for trace_find_next_entry() was incorrectly
being updated when the size did not change. The temp buffer size should only
be updated when it is reallocated.
This is mostly an issue when used with ftrace_dump(). That's because
ftrace_dump() can not allocate a new buffer, and instead uses a temporary
buffer with a fix size. But the variable that keeps track of that size is
incorrectly updated with each call, and it could fall into the path that
would try to reallocate the buffer and produce a warning.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1601 at kernel/trace/trace.c:3548
trace_find_next_entry+0xd0/0xe0
Modules linked in [..]
CPU: 1 PID: 1601 Comm: bash Not tainted 5.9.0-rc5-test+ #521
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03
07/14/2016
RIP: 0010:trace_find_next_entry+0xd0/0xe0
Code: 40 21 00 00 4c 89 e1 31 d2 4c 89 ee 48 89 df e8 c6 9e ff ff 89 ab 54
21 00 00 5b 5d 41 5c 41 5d c3 48 63 d5 eb bf 31 c0 eb f0 <0f> 0b 48 63 d5 eb
b4 66 0f 1f 84 00 00 00 00 00 53 48 8d 8f 60 21
RSP: 0018:ffff95a4f2e8bd70 EFLAGS: 00010046
RAX: ffffffff96679fc0 RBX: ffffffff97910de0 RCX: ffffffff96679fc0
RDX: ffff95a4f2e8bd98 RSI: ffff95a4ee321098 RDI: ffffffff97913000
RBP: 0000000000000018 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000046 R12: ffff95a4f2e8bd98
R13: 0000000000000000 R14: ffff95a4ee321098 R15: 00000000009aa301
FS: 00007f8565484740(0000) GS:ffff95a55aa40000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055876bd43d90 CR3: 00000000b76e6003 CR4: 00000000001706e0
Call Trace:
trace_print_lat_context+0x58/0x2d0
? cpumask_next+0x16/0x20
print_trace_line+0x1a4/0x4f0
ftrace_dump.cold+0xad/0x12c
__handle_sysrq.cold+0x51/0x126
write_sysrq_trigger+0x3f/0x4a
proc_reg_write+0x53/0x80
vfs_write+0xca/0x210
ksys_write+0x70/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f8565579487
Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa
64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff
77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007ffd40707948 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f8565579487
RDX: 0000000000000002 RSI: 000055876bd74de0 RDI: 0000000000000001
RBP: 000055876bd74de0 R08: 000000000000000a R09: 0000000000000001
R10: 000055876bdec280 R11: 0000000000000246 R12: 0000000000000002
R13: 00007f856564a500 R14: 0000000000000002 R15: 00007f856564a700
irq event stamp: 109958
---[ end trace 7aab5b7e51484b00 ]---
Not only fix the updating of the temp buffer, but also do not free the temp
buffer before a new buffer is allocated (there's no reason to not continue
to use the current temp buffer if an allocation fails).
Cc: stable@vger.kernel.org
Fixes: 8e99cf91b9 ("tracing: Do not allocate buffer in trace_find_next_entry() in atomic")
Reported-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
*) Fix of leak in TI phy driver
-----BEGIN PGP SIGNATURE-----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=dNeg
-----END PGP SIGNATURE-----
Merge tag 'phy-fixes-2-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into usb-linus
Vinod writes:
phy: Second round of fixes for 5.9
*) Fix of leak in TI phy driver
* tag 'phy-fixes-2-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: ti: am654: Fix a leak in serdes_am654_probe()
Blk-mq should call commit_rqs once 'bd.last != true' and no more
request will come(so virtscsi can kick the virtqueue, e.g.). We already
do that in 'blk_mq_dispatch_rq_list/blk_mq_try_issue_list_directly' while
list not empty and 'queued > 0'. However, we can seen the same scene
once the last request in list call queue_rq and return error like
BLK_STS_IOERR which will not requeue the request, and lead that list
empty but need call commit_rqs too(Or the request for virtscsi will stay
timeout until other request kick virtqueue).
We found this problem by do fsstress test with offline/online virtscsi
device repeat quickly.
Fixes: d666ba98f8 ("blk-mq: add mq_ops->commit_rqs()")
Reported-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The async buffered reads feature is not working when readahead is
turned off. There are two things to concern:
- when doing retry in io_read, not only the IOCB_WAITQ flag but also
the IOCB_NOWAIT flag is still set, which makes it goes to would_block
phase in generic_file_buffered_read() and then return -EAGAIN. After
that, the io-wq thread work is queued, and later doing the async
reads in the old way.
- even if we remove IOCB_NOWAIT when doing retry, the feature is still
not running properly, since in generic_file_buffered_read() it goes to
lock_page_killable() after calling mapping->a_ops->readpage() to do
IO, and thus causing process to sleep.
Fixes: 1a0a7853b9 ("mm: support async buffered reads in generic_file_buffered_read()")
Fixes: 3b2a4439e0 ("io_uring: get rid of kiocb_wait_page_queue_init()")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- fix uninitialized variable in gpio-pca953x
- enable all 160 lines and fix interrupt configuration in gpio-aspeed-gpio
- fix ast2600 bank properties in gpio-aspeed
-----BEGIN PGP SIGNATURE-----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=WVAS
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v5.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes
gpio: fixes for v5.9-rc7
- fix uninitialized variable in gpio-pca953x
- enable all 160 lines and fix interrupt configuration in gpio-aspeed-gpio
- fix ast2600 bank properties in gpio-aspeed
Touchpad on this laptop is not detected properly during boot, as PNP
enumerates (wrongly) AUX port as disabled on this machine.
Fix that by adding this board (with admittedly quite funny DMI
identifiers) to nopnp quirk list.
Reported-by: Andrés Barrantes Silman <andresbs2000@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2009252337340.3336@cbobk.fhfr.pm
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add Synaptics IDs in trackpoint_start_protocol() to mark them as valid.
Signed-off-by: Vincent Huang <vincent.huang@tw.synaptics.com>
Fixes: 6c77545af1 ("Input: trackpoint - add new trackpoint variant IDs")
Reviewed-by: Harry Cutts <hcutts@chromium.org>
Tested-by: Harry Cutts <hcutts@chromium.org>
Link: https://lore.kernel.org/r/20200924053013.1056953-1-vincent.huang@tw.synaptics.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Highlights include:
Bugfixes:
- NFSv4.2: copy_file_range needs to invalidate caches on success
- NFSv4.2: Fix security label length not being reset
- pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly on read
- pNFS/flexfiles: Fix signed/unsigned type issues with mirror indices
-----BEGIN PGP SIGNATURE-----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=cNi/
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
- NFSv4.2: copy_file_range needs to invalidate caches on success
- NFSv4.2: Fix security label length not being reset
- pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly
on read
- pNFS/flexfiles: Fix signed/unsigned type issues with mirror
indices"
* tag 'nfs-for-5.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
pNFS/flexfiles: Be consistent about mirror index types
pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly on read
NFSv4.2: fix client's attribute cache management for copy_file_range
nfs: Fix security label length not being reset
It seems likely this block was pasted from internal_get_user_pages_fast,
which is not passed an mm struct and therefore uses current's. But
__get_user_pages_locked is passed an explicit mm, and current->mm is not
always valid. This was hit when being called from i915, which uses:
pin_user_pages_remote->
__get_user_pages_remote->
__gup_longterm_locked->
__get_user_pages_locked
Before, this would lead to an OOPS:
BUG: kernel NULL pointer dereference, address: 0000000000000064
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
CPU: 10 PID: 1431 Comm: kworker/u33:1 Tainted: P S U O 5.9.0-rc7+ #140
Hardware name: LENOVO 20QTCTO1WW/20QTCTO1WW, BIOS N2OET47W (1.34 ) 08/06/2020
Workqueue: i915-userptr-acquire __i915_gem_userptr_get_pages_worker [i915]
RIP: 0010:__get_user_pages_remote+0xd7/0x310
Call Trace:
__i915_gem_userptr_get_pages_worker+0xc8/0x260 [i915]
process_one_work+0x1ca/0x390
worker_thread+0x48/0x3c0
kthread+0x114/0x130
ret_from_fork+0x1f/0x30
CR2: 0000000000000064
This commit fixes the problem by using the mm pointer passed to the
function rather than the bogus one in current.
Fixes: 008cfe4418 ("mm: Introduce mm_struct.has_pinned")
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Harald Arnesen <harald@skogtun.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current binding for the RPi firmware uses the simple-bus compatible as
a fallback to benefit from its automatic probing of child nodes.
However, simple-bus also comes with some constraints, like having the ranges,
our case.
Let's switch to simple-mfd that provides the same probing logic without
those constraints.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200924082642.18144-1-maxime@cerno.tech
Signed-off-by: Rob Herring <robh@kernel.org>
The original commit appears to have the logic reversed in
amd_fch_gpio_get_direction. Also confirmed by observing the value of
"direction" in the sys tree.
Signed-off-by: Ed Wildgoose <lists@wildgooses.com>
Fixes: e09d168f13 ("gpio: AMD G-Series PCH gpio driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Commit bedf9fc01f ("mmc: sdhci: Workaround broken command queuing on
Intel GLK"), disabled command-queuing on Intel GLK based LENOVO models
because of it being broken due to what is believed to be a bug in
the BIOS.
It seems that the BIOS of some IRBIS models, including the IRBIS NB111
model has the same issue, so disable command queuing there too.
Fixes: bedf9fc01f ("mmc: sdhci: Workaround broken command queuing on Intel GLK")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209397
Reported-and-tested-by: RussianNeuroMancer <russianneuromancer@ya.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200927104821.5676-1-hdegoede@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
After commit 6827ca573c ("memstick: rtsx_usb_ms: Support runtime power
management"), removing module rtsx_usb_ms will be stuck.
The deadlock is caused by powering on and powering off at the same time,
the former one is when memstick_check() is flushed, and the later is called
by memstick_remove_host().
Soe let's skip allocating card to prevent this issue.
Fixes: 6827ca573c ("memstick: rtsx_usb_ms: Support runtime power management")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200925084952.13220-1-kai.heng.feng@canonical.com
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
- Unbreak the magic 'search the timer interrupt' logic in IO/APIC code
which got wreckaged when the core interrupt code made the state
tracking logic stricter. That caused the interrupt line to stay masked
after switching from IO/APIC to PIC delivery mode, which obviously
prevents interrupts from being delivered.
- Make run_on_irqstack_code() typesafe. The function argument is a void
pointer which is then casted to 'void (*fun)(void *). This breaks
Control Flow Integrity checking in clang. Use proper helper functions
for the three variants reuqired.
-----BEGIN PGP SIGNATURE-----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=BcVu
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Two fixes for the x86 interrupt code:
- Unbreak the magic 'search the timer interrupt' logic in IO/APIC
code which got wreckaged when the core interrupt code made the
state tracking logic stricter.
That caused the interrupt line to stay masked after switching from
IO/APIC to PIC delivery mode, which obviously prevents interrupts
from being delivered.
- Make run_on_irqstack_code() typesafe. The function argument is a
void pointer which is then cast to 'void (*fun)(void *).
This breaks Control Flow Integrity checking in clang. Use proper
helper functions for the three variants reuqired"
* tag 'x86-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Unbreak check_timer()
x86/irq: Make run_on_irqstack_cond() typesafe
- Reset the TI/DM timer before enabling it instead of doing it the other
way round.
- Initialize the reload value for the GX6605s timer correctly so the
hardware counter starts at 0 again after overrun.
- Make error return value negative in the h8300 timer init function
-----BEGIN PGP SIGNATURE-----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=Htin
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A set of clocksource/clockevents updates:
- Reset the TI/DM timer before enabling it instead of doing it the
other way round.
- Initialize the reload value for the GX6605s timer correctly so the
hardware counter starts at 0 again after overrun.
- Make error return value negative in the h8300 timer init function"
* tag 'timers-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/timer-gx6605s: Fixup counter reload
clocksource/drivers/timer-ti-dm: Do reset before enable
clocksource/drivers/h8300_timer8: Fix wrong return value in h8300_8timer_init()
Pinned pages shouldn't be write-protected when fork() happens, because
follow up copy-on-write on these pages could cause the pinned pages to
be replaced by random newly allocated pages.
For huge PMDs, we split the huge pmd if pinning is detected. So that
future handling will be done by the PTE level (with our latest changes,
each of the small pages will be copied). We can achieve this by let
copy_huge_pmd() return -EAGAIN for pinned pages, so that we'll
fallthrough in copy_pmd_range() and finally land the next
copy_pte_range() call.
Huge PUDs will be even more special - so far it does not support
anonymous pages. But it can actually be done the same as the huge PMDs
even if the split huge PUDs means to erase the PUD entries. It'll
guarantee the follow up fault ins will remap the same pages in either
parent/child later.
This might not be the most efficient way, but it should be easy and
clean enough. It should be fine, since we're tackling with a very rare
case just to make sure userspaces that pinned some thps will still work
even without MADV_DONTFORK and after they fork()ed.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This allows copy_pte_range() to do early cow if the pages were pinned on
the source mm.
Currently we don't have an accurate way to know whether a page is pinned
or not. The only thing we have is page_maybe_dma_pinned(). However
that's good enough for now. Especially, with the newly added
mm->has_pinned flag to make sure we won't affect processes that never
pinned any pages.
It would be easier if we can do GFP_KERNEL allocation within
copy_one_pte(). Unluckily, we can't because we're with the page table
locks held for both the parent and child processes. So the page
allocation needs to be done outside copy_one_pte().
Some trick is there in copy_present_pte(), majorly the wrprotect trick
to block concurrent fast-gup. Comments in the function should explain
better in place.
Oleg Nesterov reported a (probably harmless) bug during review that we
didn't reset entry.val properly in copy_pte_range() so that potentially
there's chance to call add_swap_count_continuation() multiple times on
the same swp entry. However that should be harmless since even if it
happens, the same function (add_swap_count_continuation()) will return
directly noticing that there're enough space for the swp counter. So
instead of a standalone stable patch, it is touched up in this patch
directly.
Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This prepares for the future work to trigger early cow on pinned pages
during fork().
No functional change intended.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(Commit message majorly collected from Jason Gunthorpe)
Reduce the chance of false positive from page_maybe_dma_pinned() by
keeping track if the mm_struct has ever been used with pin_user_pages().
This allows cases that might drive up the page ref_count to avoid any
penalty from handling dma_pinned pages.
Future work is planned, to provide a more sophisticated solution, likely
to turn it into a real counter. For now, make it atomic_t but use it as
a boolean for simplicity.
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Due to a HW issue, in some scenarios the LAST bit might remain set.
This will cause an unexpected NACK after reading 16 bytes on the next
read.
Example: if user tries to read from a missing device, get a NACK,
then if the next command is a long read ( > 16 bytes),
the master will stop reading after 16 bytes.
To solve this, if a command fails, check if LAST bit is still
set. If it does, reset the module.
Fixes: 56a1485b10 (i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver)
Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
the i2c_ram structure is missing the sdmatmp field mentionned in
datasheet for MPC8272 at paragraph 36.5. With this field missing, the
hardware would write past the allocated memory done through
cpm_muram_alloc for the i2c_ram structure and land in memory allocated
for the buffers descriptors corrupting the cbd_bufaddr field. Since this
field is only set during setup(), the first i2c transaction would work
and the following would send data read from an arbitrary memory
location.
Fixes: 61045dbe9d ("i2c: Add support for I2C bus on Freescale CPM1/CPM2 controllers")
Signed-off-by: Nicolas VINCENT <nicolas.vincent@vossloh.com>
Acked-by: Jochen Friedrich <jochen@scram.de>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
function for the h8300 timer (Tianjia Zhang)
- Fix reset sequence when setting up the timer on the dm_timer (Tony
Lindgren)
- Fix counter reload when the interrupt fires on gx6605s (Guo Ren)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAl9SG88ACgkQqDIjiipP
6E/zAgf+KtVSIp8NF1N0WPbwVHzqvg4RODIKvLgbaPvRPQRmU+tNZnLtRBfQkyg+
ul6snRlhHAAI1auLczLXRVb/u2ERtjqBukxrA7ECMJNx+bGOars4j2w6tSQ1InFU
B659c2ELvMSe97mrpnWAs9IWcau3fMMweNn2rTL6erK9nt2Ap0cjmf58tSG72hh1
0TRBbLaFSwj7Eq+IG8YjsYHzeQ/1DlHcaPbfFOFNwgWIq5Q4GSHvc1sbkmzeb6ps
lx2nmF3sw9KSN5cyvALtU7944nNIexMQNcxXcCjRuLFtgNFlyJseWEQY5rmKHYWN
vVGMEjyM184g2ZYA/ll8uFZtZ0SA6g==
=E64+
-----END PGP SIGNATURE-----
Merge tag 'timers-v5.9-rc4' of https://git.linaro.org/people/daniel.lezcano/linux into timers/urgent
Pull clocksource/clockevent fixes from Daniel Lezcano:
- Fix wrong signed return value when checking of_iomap in the probe
function for the h8300 timer (Tianjia Zhang)
- Fix reset sequence when setting up the timer on the dm_timer (Tony
Lindgren)
- Fix counter reload when the interrupt fires on gx6605s (Guo Ren)
Three fixes: one in drivers (lpfc) and two for zoned block devices.
The latter also impinges on the block layer but only to introduce a
new block API for setting the zone model rather than fiddling with the
queue directly in the zoned block driver.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX29mRyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishabnAP48vMYD
/cjyGAJfq/0k/U/t6pRPc5tUm89LOWcOJz0SjwD/YXcQNz7mx8MxnypAV1jbWXR7
iyWkPMYVc4EJh7oTARE=
=SQhI
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three fixes: one in drivers (lpfc) and two for zoned block devices.
The latter also impinges on the block layer but only to introduce a
new block API for setting the zone model rather than fiddling with the
queue directly in the zoned block driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: sd_zbc: Fix ZBC disk initialization
scsi: sd: sd_zbc: Fix handling of host-aware ZBC disks
scsi: lpfc: Fix initial FLOGI failure due to BBSCN not supported
-----BEGIN PGP SIGNATURE-----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=mBw7
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.9-2020-09-25' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two fixes for regressions in this cycle, and one that goes to 5.8
stable:
- fix leak of getname() retrieved filename
- remove plug->nowait assignment, fixing a regression with btrfs
- fix for async buffered retry"
* tag 'io_uring-5.9-2020-09-25' of git://git.kernel.dk/linux-block:
io_uring: ensure async buffered read-retry is setup properly
io_uring: don't unconditionally set plug->nowait = true
io_uring: ensure open/openat2 name is cleaned on cancelation
-----BEGIN PGP SIGNATURE-----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=e8oA
-----END PGP SIGNATURE-----
Merge tag 'block-5.9-2020-09-25' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"NVMe pull request from Christoph, and removal of a dead define.
- fix error during controller probe that cause double free irqs
(Keith Busch)
- FC connection establishment fix (James Smart)
- properly handle completions for invalid tags (Xianting Tian)
- pass the correct nsid to the command effects and supported log
(Chaitanya Kulkarni)"
* tag 'block-5.9-2020-09-25' of git://git.kernel.dk/linux-block:
block: remove unused BLK_QC_T_EAGAIN flag
nvme-core: don't use NVME_NSID_ALL for command effects and supported log
nvme-fc: fail new connections to a deleted host or remote port
nvme-pci: fix NULL req in completion handler
nvme: return errors for hwmon init
Merge misc fixes from Andrew Morton:
"9 patches.
Subsystems affected by this patch series: mm (thp, memcg, gup,
migration, memory-hotplug), lib, and x86"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: don't rely on system state to detect hot-plug operations
mm: replace memmap_context by meminit_context
arch/x86/lib/usercopy_64.c: fix __copy_user_flushcache() cache writeback
lib/memregion.c: include memregion.h
lib/string.c: implement stpcpy
mm/migrate: correct thp migration stats
mm/gup: fix gup_fast with dynamic page table folding
mm: memcontrol: fix missing suffix of workingset_restore
mm, THP, swap: fix allocating cluster for swapfile by mistake
In register_mem_sect_under_node() the system_state's value is checked to
detect whether the call is made during boot time or during an hot-plug
operation. Unfortunately, that check against SYSTEM_BOOTING is wrong
because regular memory is registered at SYSTEM_SCHEDULING state. In
addition, memory hot-plug operation can be triggered at this system
state by the ACPI [1]. So checking against the system state is not
enough.
The consequence is that on system with interleaved node's ranges like this:
Early memory node ranges
node 1: [mem 0x0000000000000000-0x000000011fffffff]
node 2: [mem 0x0000000120000000-0x000000014fffffff]
node 1: [mem 0x0000000150000000-0x00000001ffffffff]
node 0: [mem 0x0000000200000000-0x000000048fffffff]
node 2: [mem 0x0000000490000000-0x00000007ffffffff]
This can be seen on PowerPC LPAR after multiple memory hot-plug and
hot-unplug operations are done. At the next reboot the node's memory
ranges can be interleaved and since the call to link_mem_sections() is
made in topology_init() while the system is in the SYSTEM_SCHEDULING
state, the node's id is not checked, and the sections registered to
multiple nodes:
$ ls -l /sys/devices/system/memory/memory21/node*
total 0
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2
In that case, the system is able to boot but if later one of theses
memory blocks is hot-unplugged and then hot-plugged, the sysfs
inconsistency is detected and this is triggering a BUG_ON():
kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4
CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25
Call Trace:
add_memory_resource+0x23c/0x340 (unreliable)
__add_memory+0x5c/0xf0
dlpar_add_lmb+0x1b4/0x500
dlpar_memory+0x1f8/0xb80
handle_dlpar_errorlog+0xc0/0x190
dlpar_store+0x198/0x4a0
kobj_attr_store+0x30/0x50
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
vfs_write+0xe8/0x290
ksys_write+0xdc/0x130
system_call_exception+0x160/0x270
system_call_common+0xf0/0x27c
This patch addresses the root cause by not relying on the system_state
value to detect whether the call is due to a hot-plug operation. An
extra parameter is added to link_mem_sections() detailing whether the
operation is due to a hot-plug operation.
[1] According to Oscar Salvador, using this qemu command line, ACPI
memory hotplug operations are raised at SYSTEM_SCHEDULING state:
$QEMU -enable-kvm -machine pc -smp 4,sockets=4,cores=1,threads=1 -cpu host -monitor pty \
-m size=$MEM,slots=255,maxmem=4294967296k \
-numa node,nodeid=0,cpus=0-3,mem=512 -numa node,nodeid=1,mem=512 \
-object memory-backend-ram,id=memdimm0,size=134217728 -device pc-dimm,node=0,memdev=memdimm0,id=dimm0,slot=0 \
-object memory-backend-ram,id=memdimm1,size=134217728 -device pc-dimm,node=0,memdev=memdimm1,id=dimm1,slot=1 \
-object memory-backend-ram,id=memdimm2,size=134217728 -device pc-dimm,node=0,memdev=memdimm2,id=dimm2,slot=2 \
-object memory-backend-ram,id=memdimm3,size=134217728 -device pc-dimm,node=0,memdev=memdimm3,id=dimm3,slot=3 \
-object memory-backend-ram,id=memdimm4,size=134217728 -device pc-dimm,node=1,memdev=memdimm4,id=dimm4,slot=4 \
-object memory-backend-ram,id=memdimm5,size=134217728 -device pc-dimm,node=1,memdev=memdimm5,id=dimm5,slot=5 \
-object memory-backend-ram,id=memdimm6,size=134217728 -device pc-dimm,node=1,memdev=memdimm6,id=dimm6,slot=6 \
Fixes: 4fbce63391 ("mm/memory_hotplug.c: make register_mem_sect_under_node() a callback of walk_memory_range()")
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200915094143.79181-3-ldufour@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: fix memory to node bad links in sysfs", v3.
Sometimes, firmware may expose interleaved memory layout like this:
Early memory node ranges
node 1: [mem 0x0000000000000000-0x000000011fffffff]
node 2: [mem 0x0000000120000000-0x000000014fffffff]
node 1: [mem 0x0000000150000000-0x00000001ffffffff]
node 0: [mem 0x0000000200000000-0x000000048fffffff]
node 2: [mem 0x0000000490000000-0x00000007ffffffff]
In that case, we can see memory blocks assigned to multiple nodes in
sysfs:
$ ls -l /sys/devices/system/memory/memory21
total 0
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2
-rw-r--r-- 1 root root 65536 Aug 24 05:27 online
-r--r--r-- 1 root root 65536 Aug 24 05:27 phys_device
-r--r--r-- 1 root root 65536 Aug 24 05:27 phys_index
drwxr-xr-x 2 root root 0 Aug 24 05:27 power
-r--r--r-- 1 root root 65536 Aug 24 05:27 removable
-rw-r--r-- 1 root root 65536 Aug 24 05:27 state
lrwxrwxrwx 1 root root 0 Aug 24 05:25 subsystem -> ../../../../bus/memory
-rw-r--r-- 1 root root 65536 Aug 24 05:25 uevent
-r--r--r-- 1 root root 65536 Aug 24 05:27 valid_zones
The same applies in the node's directory with a memory21 link in both
the node1 and node2's directory.
This is wrong but doesn't prevent the system to run. However when
later, one of these memory blocks is hot-unplugged and then hot-plugged,
the system is detecting an inconsistency in the sysfs layout and a
BUG_ON() is raised:
kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084!
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4
CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25
Call Trace:
add_memory_resource+0x23c/0x340 (unreliable)
__add_memory+0x5c/0xf0
dlpar_add_lmb+0x1b4/0x500
dlpar_memory+0x1f8/0xb80
handle_dlpar_errorlog+0xc0/0x190
dlpar_store+0x198/0x4a0
kobj_attr_store+0x30/0x50
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
vfs_write+0xe8/0x290
ksys_write+0xdc/0x130
system_call_exception+0x160/0x270
system_call_common+0xf0/0x27c
This has been seen on PowerPC LPAR.
The root cause of this issue is that when node's memory is registered,
the range used can overlap another node's range, thus the memory block
is registered to multiple nodes in sysfs.
There are two issues here:
(a) The sysfs memory and node's layouts are broken due to these
multiple links
(b) The link errors in link_mem_sections() should not lead to a system
panic.
To address (a) register_mem_sect_under_node should not rely on the
system state to detect whether the link operation is triggered by a hot
plug operation or not. This is addressed by the patches 1 and 2 of this
series.
Issue (b) will be addressed separately.
This patch (of 2):
The memmap_context enum is used to detect whether a memory operation is
due to a hot-add operation or happening at boot time.
Make it general to the hotplug operation and rename it as
meminit_context.
There is no functional change introduced by this patch
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J . Wysocki" <rafael@kernel.org>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200915094143.79181-1-ldufour@linux.ibm.com
Link: https://lkml.kernel.org/r/20200915132624.9723-1-ldufour@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we copy less than 8 bytes and if the destination crosses a cache
line, __copy_user_flushcache would invalidate only the first cache line.
This patch makes it invalidate the second cache line as well.
Fixes: 0aed55af88 ("x86, uaccess: introduce copy_from_iter_flushcache for pmem / cache-bypass operations")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.wiilliams@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/alpine.LRH.2.02.2009161451140.21915@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This addresses the following sparse warning:
lib/memregion.c:8:5: warning: symbol 'memregion_alloc' was not declared. Should it be static?
lib/memregion.c:14:6: warning: symbol 'memregion_free' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200921142852.875312-1-yanaijie@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
LLVM implemented a recent "libcall optimization" that lowers calls to
`sprintf(dest, "%s", str)` where the return value is used to
`stpcpy(dest, str) - dest`.
This generally avoids the machinery involved in parsing format strings.
`stpcpy` is just like `strcpy` except it returns the pointer to the new
tail of `dest`. This optimization was introduced into clang-12.
Implement this so that we don't observe linkage failures due to missing
symbol definitions for `stpcpy`.
Similar to last year's fire drill with: commit 5f074f3e19
("lib/string.c: implement a basic bcmp")
The kernel is somewhere between a "freestanding" environment (no full
libc) and "hosted" environment (many symbols from libc exist with the
same type, function signature, and semantics).
As Peter Anvin notes, there's not really a great way to inform the
compiler that you're targeting a freestanding environment but would like
to opt-in to some libcall optimizations (see pr/47280 below), rather
than opt-out.
Arvind notes, -fno-builtin-* behaves slightly differently between GCC
and Clang, and Clang is missing many __builtin_* definitions, which I
consider a bug in Clang and am working on fixing.
Masahiro summarizes the subtle distinction between compilers justly:
To prevent transformation from foo() into bar(), there are two ways in
Clang to do that; -fno-builtin-foo, and -fno-builtin-bar. There is
only one in GCC; -fno-buitin-foo.
(Any difference in that behavior in Clang is likely a bug from a missing
__builtin_* definition.)
Masahiro also notes:
We want to disable optimization from foo() to bar(),
but we may still benefit from the optimization from
foo() into something else. If GCC implements the same transform, we
would run into a problem because it is not -fno-builtin-bar, but
-fno-builtin-foo that disables that optimization.
In this regard, -fno-builtin-foo would be more future-proof than
-fno-built-bar, but -fno-builtin-foo is still potentially overkill. We
may want to prevent calls from foo() being optimized into calls to
bar(), but we still may want other optimization on calls to foo().
It seems that compilers today don't quite provide the fine grain control
over which libcall optimizations pseudo-freestanding environments would
prefer.
Finally, Kees notes that this interface is unsafe, so we should not
encourage its use. As such, I've removed the declaration from any
header, but it still needs to be exported to avoid linkage errors in
modules.
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Suggested-by: Andy Lavr <andy.lavr@gmail.com>
Suggested-by: Arvind Sankar <nivedita@alum.mit.edu>
Suggested-by: Joe Perches <joe@perches.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200914161643.938408-1-ndesaulniers@google.com
Link: https://bugs.llvm.org/show_bug.cgi?id=47162
Link: https://bugs.llvm.org/show_bug.cgi?id=47280
Link: https://github.com/ClangBuiltLinux/linux/issues/1126
Link: https://man7.org/linux/man-pages/man3/stpcpy.3.html
Link: https://pubs.opengroup.org/onlinepubs/9699919799/functions/stpcpy.html
Link: https://reviews.llvm.org/D85963
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PageTransHuge returns true for both thp and hugetlb, so thp stats was
counting both thp and hugetlb migrations. Exclude hugetlb migration by
setting is_thp variable right.
Clean up thp handling code too when we are there.
Fixes: 1a5bae25e3 ("mm/vmstat: add events for THP migration without split")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lkml.kernel.org/r/20200917210413.1462975-1-zi.yan@sent.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently to make sure that every page table entry is read just once
gup_fast walks perform READ_ONCE and pass pXd value down to the next
gup_pXd_range function by value e.g.:
static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end,
unsigned int flags, struct page **pages, int *nr)
...
pudp = pud_offset(&p4d, addr);
This function passes a reference on that local value copy to pXd_offset,
and might get the very same pointer in return. This happens when the
level is folded (on most arches), and that pointer should not be
iterated.
On s390 due to the fact that each task might have different 5,4 or
3-level address translation and hence different levels folded the logic
is more complex and non-iteratable pointer to a local copy leads to
severe problems.
Here is an example of what happens with gup_fast on s390, for a task
with 3-level paging, crossing a 2 GB pud boundary:
// addr = 0x1007ffff000, end = 0x10080001000
static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end,
unsigned int flags, struct page **pages, int *nr)
{
unsigned long next;
pud_t *pudp;
// pud_offset returns &p4d itself (a pointer to a value on stack)
pudp = pud_offset(&p4d, addr);
do {
// on second iteratation reading "random" stack value
pud_t pud = READ_ONCE(*pudp);
// next = 0x10080000000, due to PUD_SIZE/MASK != PGDIR_SIZE/MASK on s390
next = pud_addr_end(addr, end);
...
} while (pudp++, addr = next, addr != end); // pudp++ iterating over stack
return 1;
}
This happens since s390 moved to common gup code with commit
d1874a0c28 ("s390/mm: make the pxd_offset functions more robust") and
commit 1a42010cdc ("s390/mm: convert to the generic
get_user_pages_fast code").
s390 tried to mimic static level folding by changing pXd_offset
primitives to always calculate top level page table offset in pgd_offset
and just return the value passed when pXd_offset has to act as folded.
What is crucial for gup_fast and what has been overlooked is that
PxD_SIZE/MASK and thus pXd_addr_end should also change correspondingly.
And the latter is not possible with dynamic folding.
To fix the issue in addition to pXd values pass original pXdp pointers
down to gup_pXd_range functions. And introduce pXd_offset_lockless
helpers, which take an additional pXd entry value parameter. This has
already been discussed in
https://lkml.kernel.org/r/20190418100218.0a4afd51@mschwideX1
Fixes: 1a42010cdc ("s390/mm: convert to the generic get_user_pages_fast code")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: <stable@vger.kernel.org> [5.2+]
Link: https://lkml.kernel.org/r/patch.git-943f1e5dcff2.your-ad-here.call-01599856292-ext-8676@work.hours
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We forget to add the suffix to the workingset_restore string, so fix it.
And also update the documentation of cgroup-v2.rst.
Fixes: 170b04b7ae ("mm/workingset: prepare the workingset detection infrastructure for anon LRU")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: https://lkml.kernel.org/r/20200916100030.71698-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
