Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
A fix to the handling of misaligned paste instructions (P9 only), where a change
to a #define has caused the check for the instruction to always fail.
The preempt handling was unbalanced in the radix THP flush (P9 only). Though we
don't generally use preempt we want to keep it working as much as possible.
Two fixes for IMC (P9 only), one when booting with restricted number of CPUs and
one in the error handling when initialisation fails due to firmware etc.
A revert to fix function_graph on big endian machines, and then a rework of the
reverted patch to fix kprobes blacklist handling on big endian machines.
Thanks to:
Anju T Sudhakar, Guilherme G. Piccoli, Madhavan Srinivasan, Naveen N. Rao,
Nicholas Piggin, Paul Mackerras.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vTi1
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 4.14.
This is bigger than I like to send at rc7, but that's at least partly
because I didn't send any fixes last week. If it wasn't for the IMC
driver, which is new and getting heavy testing, the diffstat would
look a bit better. I've also added ftrace on big endian to my test
suite, so we shouldn't break that again in future.
- A fix to the handling of misaligned paste instructions (P9 only),
where a change to a #define has caused the check for the
instruction to always fail.
- The preempt handling was unbalanced in the radix THP flush (P9
only). Though we don't generally use preempt we want to keep it
working as much as possible.
- Two fixes for IMC (P9 only), one when booting with restricted
number of CPUs and one in the error handling when initialisation
fails due to firmware etc.
- A revert to fix function_graph on big endian machines, and then a
rework of the reverted patch to fix kprobes blacklist handling on
big endian machines.
Thanks to: Anju T Sudhakar, Guilherme G. Piccoli, Madhavan Srinivasan,
Naveen N. Rao, Nicholas Piggin, Paul Mackerras"
* tag 'powerpc-4.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/perf: Fix core-imc hotplug callback failure during imc initialization
powerpc/kprobes: Dereference function pointers only if the address does not belong to kernel text
Revert "powerpc64/elfv1: Only dereference function descriptor for non-text symbols"
powerpc/64s/radix: Fix preempt imbalance in TLB flush
powerpc: Fix check for copy/paste instructions in alignment handler
powerpc/perf: Fix IMC allocation routine
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 424de9c6e3 ("powerpc/mm/radix: Avoid flushing the PWC on every flush_tlb_range")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
It turns out that not all paths calling arch_update_cpu_topology() hold
cpu_hotplug_lock, but that's OK because those paths can't race with
any concurrent hotplug events.
Warnings were reported with the following trace:
lockdep_assert_cpus_held
arch_update_cpu_topology
sched_init_domains
sched_init_smp
kernel_init_freeable
kernel_init
ret_from_kernel_thread
Which is safe because it's called early in boot when hotplug is not
live yet.
And also this trace:
lockdep_assert_cpus_held
arch_update_cpu_topology
partition_sched_domains
cpuset_update_active_cpus
sched_cpu_deactivate
cpuhp_invoke_callback
cpuhp_down_callbacks
cpuhp_thread_fun
smpboot_thread_fn
kthread
ret_from_kernel_thread
Which is safe because it's called as part of CPU hotplug, so although
we don't hold the CPU hotplug lock, there is another thread driving
the CPU hotplug operation which does hold the lock, and there is no
race.
Thanks to tglx for deciphering it for us.
Fixes: 3e401f7a2e ("powerpc: Only obtain cpu_hotplug_lock if called by rtasd")
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Two single characters (line breaks) should be put into a sequence.
Thus use the corresponding function "seq_putc".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 9445aa1a30 ("ppc: move exports to definitions")
added EXPORT_SYMBOL() for memset() and flush_hash_pages() in
the middle of the functions.
This patch moves them at the end of the two functions.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we map memory at boot we print out the ranges of real addresses
that we mapped and the page size that was used.
Currently it's a bit ugly:
Mapped range 0x0 - 0x2000000000 with 0x40000000
Mapped range 0x200000000000 - 0x202000000000 with 0x40000000
Pad the addresses so they line up, and print the page size using
actual units, eg:
Mapped 0x0000000000000000-0x0000000001200000 with 64.0 KiB pages
Mapped 0x0000000001200000-0x0000000040000000 with 2.00 MiB pages
Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
It's too big to be inline, there is no reason to keep it
that way.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Rework to incorporate the comment changes via fixes branch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instead of comparing the whole CPU mask every time, let's
keep a counter of how many bits are set in the mask. Thus
testing for a local mm only requires testing if that counter
is 1 and the current CPU bit is set in the mask.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We open-code testing for the mm being local to the current CPU
in a few places. Use our existing helper instead.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There's a non-trivial dependency between some commits we want to put in
next and the KVM prefetch work around that went into fixes. So merge
fixes into next.
We use mm cpumask for serializing against lockless page table walk.
Anybody who is doing a lockless page table walk is expected to disable
irq and only cpus in mm cpumask is expected do the lockless walk. This
ensure that a THP split can send IPI to only cpus in the mm cpumask,
to make sure there are no parallel lockless page table walk.
Add the CAPI fault handling cpu to the mm cpumask so that we can do
the lockless page table walk while inserting hash page table entries.
Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that we made sure that lockless walk of linux page table is mostly
limitted to current task(current->mm->pgdir) we can update the THP
update sequence to only send IPI to CPUs on which this task has run.
This helps in reducing the IPI overload on systems with large number
of CPUs.
WRT kvm even though kvm is walking page table with vpc->arch.pgdir,
it is done only on secondary CPUs and in that case we have primary CPU
added to task's mm cpumask. Sending an IPI to primary will force the
secondary to do a vm exit and hence this mm cpumask usage is safe
here.
WRT CAPI, we still end up walking linux page table with capi context
MM. For now the pte lookup serialization sends an IPI to all CPUs in
CPI is in use. We can further improve this by adding the CAPI
interrupt handling CPU to task mm cpumask. That will be done in a
later patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Bring in the commit to rename find_linux_pte_or_hugepte() which touches
arch and KVM code, and might need to be merged with the kvmppc tree to
avoid conflicts.
Add newer helpers to make the function usage simpler. It is always
recommended to use find_current_mm_pte() for walking the page table.
If we cannot use find_current_mm_pte(), it should be documented why
the said usage of __find_linux_pte() is safe against a parallel THP
split.
For now we have KVM code using __find_linux_pte(). This is because kvm
code ends up calling __find_linux_pte() in real mode with MSR_EE=0 but
with PACA soft_enabled = 1. We may want to fix that later and make
sure we keep the MSR_EE and PACA soft_enabled in sync. When we do that
we can switch kvm to use find_linux_pte().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With commit aa888a7497 ("hugetlb: support larger than MAX_ORDER") we added
support for allocating gigantic hugepages via kernel command line. Switch
ppc64 arch specific code to use that.
W.r.t FSL support, we now limit our allocation range using BOOTMEM_ALLOC_ACCESSIBLE.
We use the kernel command line to do reservation of hugetlb pages on powernv
platforms. On pseries hash mmu mode the supported gigantic huge page size is
16GB and that can only be allocated with hypervisor assist. For pseries the
command line option doesn't do the allocation. Instead pseries does gigantic
hugepage allocation based on hypervisor hint that is specified via
"ibm,expected#pages" property of the memory node.
Cc: Scott Wood <oss@buserror.net>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
gup_hugepte() checks if pages are present and readable, and
when 'write' is set, also checks if the pages are writable.
Initially this was done by checking if _PAGE_PRESENT and
_PAGE_READ were set. In addition, _PAGE_WRITE was verified for write
accesses.
The problem is that we have to handle the three following cases:
1/ The target defines __PAGE_READ and __PAGE_WRITE
2/ The target defines __PAGE_RW
3/ The target defines __PAGE_RO
In case 1/, this is obvious
In case 2/, __PAGE_READ is defined as 0 and __PAGE_WRITE as __PAGE_RW
so it works as well.
But in case 3, __PAGE_RW is defined as 0, which means __PAGE_WRITE is 0
and then the test returns true (page writable) in all cases.
A first correction was attempted in commit 6b8cb66a6a ("powerpc: Fix
usage of _PAGE_RO in hugepage"), but that fix is wrong:
instead of checking that the page is writable when write is requested,
it checks that the page is NOT writable when write is NOT requested.
This patch adds a new pte_read() helper to check whether a page is
readable or not. This avoids handling all possible cases in
gup_hugepte().
Then gup_hugepte() is modified to use pte_present(), pte_read()
and pte_write() instead of the raw flags.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
__set_fixmap() uses __fix_to_virt() then does the boundary checks
by it self. Instead, we can use fix_to_virt() which does the
verification at build time. For this, we need to use it inline
so that GCC can see the real value of idx at buildtime.
In the meantime, we remove the 'fixmaps' variable.
This variable is set but has never been used from the beginning
(commit 2c419bdeca ("[POWERPC] Port fixmap from x86 and use
for kmap_atomic"))
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
get_pteptr() and __mapin_ram_chunk() are only used locally,
so define them static
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch implements STRICT_KERNEL_RWX on PPC32.
As for CONFIG_DEBUG_PAGEALLOC, it deactivates BAT and LTLB mappings
in order to allow page protection setup at the level of each page.
As BAT/LTLB mappings are deactivated, there might be a performance
impact.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As seen below, allthough the init sections have been freed, the
associated memory area is still marked as executable in the
page tables.
~ dmesg
[ 5.860093] Freeing unused kernel memory: 592K (c0570000 - c0604000)
~ cat /sys/kernel/debug/kernel_page_tables
---[ Start of kernel VM ]---
0xc0000000-0xc0497fff 4704K rw X present dirty accessed shared
0xc0498000-0xc056ffff 864K rw present dirty accessed shared
0xc0570000-0xc059ffff 192K rw X present dirty accessed shared
0xc05a0000-0xc7ffffff 125312K rw present dirty accessed shared
---[ vmalloc() Area ]---
This patch fixes that.
The implementation is done by reusing the change_page_attr()
function implemented for CONFIG_DEBUG_PAGEALLOC
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
__change_page_attr() uses flush_tlb_page().
flush_tlb_page() uses tlbie instruction, which also invalidates
pinned TLBs, which is not what we expect.
This patch modifies the implementation to use flush_tlb_kernel_range()
instead. This will make use of tlbia which will preserve pinned TLBs.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
setup_initial_memory_limit() is only called during init.
mmu_patch_cmp_limit() is only called from 8xx_mmu.c
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As stated in a comment in head_8xx.S, today we "Always pin the first
8 MB ITLB to prevent ITLB misses while mucking around with SRR0/SRR1
in asm".
This issue has just been cleared by the preceding patch, therefore
we can make this pinning optional (on by default) and independent
of DATA pinning.
This patch also makes pinning of IMMR independent of pinning of DATA.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On the 8xx, the RAM mapped with LTLBs must be seen as block mapped,
just like areas mapped with BATs on standard PPC32.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use symbolic names for DSISR bits in DSI
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Two config options exist to define powerpc MPC8xx:
* CONFIG_PPC_8xx
* CONFIG_8xx
arch/powerpc/platforms/Kconfig.cputype has contained the following
comment about CONFIG_8xx item for some years:
"# this is temp to handle compat with arch=ppc"
arch/powerpc is now the only place with remaining use of
CONFIG_8xx: get rid of them.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The host process table base is stored in the partition table by calling
the function native_register_process_table(). Currently this just sets
the entry in memory and is missing a subsequent cache invalidation
instruction. Any update to the partition table should be followed by a
cache invalidation instruction specifying invalidation of the caching of
any partition table entries (RIC = 2, PRS = 0).
We already have a function to update the partition table with the
required cache invalidation instructions - mmu_partition_table_set_entry().
Update the native_register_process_table() function to call
mmu_partition_table_set_entry(), this ensures all appropriate
invalidation will be performed.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Use a local for patb0 to clean it up slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On 64-bit book3s, with the hash MMU, we currently define the kernel
virtual space (vmalloc, ioremap etc.), to be 16T in size. This is a
leftover from pre v3.7 when our user VM was also 16T.
Of that 16T we split it 50/50, with half used for PCI IO and ioremap
and the other 8T for vmalloc.
We never bothered to make it any bigger because 8T of vmalloc ought to
be enough for anybody. But it turns out that's not true, the per cpu
allocator wants large amounts of vmalloc space, not to make large
allocations, but to allow a large stride between allocations, because
we use pcpu_embed_first_chunk().
With a bit of juggling we can increase the entire kernel virtual space
to 64T. The only real complication is the check of the address in the
SLB miss handler, see the comment in the code.
Although we could continue to split virtual space 50/50 as we do now,
no one seems to be running out of PCI IO or ioremap space. So instead
keep that as 8T, and use the remaining 56T for vmalloc.
In future we should be able to increase the kernel virtual space to
512T, the code already supports that, it just needs testing on older
hardware.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
There is a comment in slb_allocate() referring to the load of
paca->vmalloc_sllp, but it's several lines prior in the assembly.
We're about to change this code, and we want to add another comment,
so move the comment immediately prior to the instruction it's talking
about.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently KERN_IO_START is defined as:
#define KERN_IO_START (KERN_VIRT_START + (KERN_VIRT_SIZE >> 1))
Although it looks like a constant, both the components are actually
variables, to allow us to have a different value between Radix and
Hash with a single kernel.
However that still requires both Radix and Hash to place the kernel IO
region at the same location relative to the start and end of the
kernel virtual region (namely 1/2 way through it), and we'd like to
change that.
So split KERN_IO_START out into its own variable, and initialise it
for Radix and Hash. In the medium term we should be able to
reconsolidate this, by doing a more involved rearrangement of the
location of the regions.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We have a whole pile of unused code to maintain the ACOP register,
allocate coprocessor PIDs and handle ACOP faults. This mechanism
was used for the HFI adapter on POWER7 which is dead and gone and
whose driver never went upstream. It was used on some A2 core based
stuff that also never saw the light of day.
Take out all that code.
There is still some POWER8 coprocessor code that uses icswx but it's
kernel only and thus doesn't use any of that infrastructure.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When hitting below a VM_GROWSDOWN vma (typically growing the stack),
we check whether it's a valid stack-growing instruction and we
check the distance to GPR1. This is largely open coded with lots
of comments, so move it out to a helper.
While at it, make store_update_sp a boolean.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If the first iteration returns VM_FAULT_MAJOR but the second
one doesn't, we fail to account the fault as a major fault.
This fixes it and brings the code in line with x86.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move out the code that sets FAULT_FLAG_WRITE so the block that check
access permissions can be extracted. While at it also set
FAULT_FLAG_INSTRUCTION which will be used for protection keys.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Do the check before we re-enable interrupts and clean the code
up a bit.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This has a page of comment explaining what's going on right in
the middle of do_page_fault() which makes things a bit hard to
follow. Move it to a helper instead. Also do the test earlier
as there's no point waiting until after we found the VMA.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
No need to break those lines, they aren't that long
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
It makes do_page_fault() more readable. No functional change.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
First, handle the normal retry failure in do_page_fault itself,
since it's a simple return statement. That allows us to remove
the "continue" special return code from mm_fault_error().
Once that's done, we can have an implementation much closer to
x86 where we only call mm_fault_error() if VM_FAULT_ERROR is set
and directly return.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instead of goto labels, instead call those functions and return.
This gets us closer to x86 and allows us to shring do_page_fault()
even more.
The main difference with x86 is that those function return a value
which we then return from do_page_fault(). That value is our
return value from do_page_fault() which we use to generate
kernel faults.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We currently test for is_exec and DSISR_PROTFAULT but that doesn't
make sense as this is the wrong error bit to test for an execute
permission failure.
In fact, we had code that would return early if we had an exec
fault in kernel mode so I think that was just dead code anyway.
Finally the location of that test is awkward and prevents further
simplifications.
So instead move that test into a helper along with the existing
early test for kernel exec faults and out of range accesses,
and put it all in a "bad_kernel_fault()" helper. While at it
test the correct error bits.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that we moved the exception state handling to a wrapper, we can
just directly return rather than "goto bail"
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
