We only have two callers that need the integer loop iterator, and they
can easily maintain it themselves.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Coly Li <colyli@suse.de>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch introduces one extra iterator variable to bio_for_each_segment_all(),
then we can allow bio_for_each_segment_all() to iterate over multi-page bvec.
Given it is just one mechannical & simple change on all bio_for_each_segment_all()
users, this patch does tree-wide change in one single patch, so that we can
avoid to use a temporary helper for this conversion.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In two places, the gfs2_io_error_bh macro is called while holding the
sd_ail_lock spin lock. This isn't allowed because gfs2_io_error_bh
withdraws the filesystem, which can sleep because it issues a uevent.
To fix that, add a gfs2_io_error_bh_wd macro that does withdraw the
filesystem and change gfs2_io_error_bh to not withdraw the filesystem.
In those places where the new gfs2_io_error_bh is used, withdraw the
filesystem after releasing sd_ail_lock.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andrew Price <anprice@redhat.com>
Pull block layer updates from Jens Axboe:
"This is the first pull request for 4.14, containing most of the code
changes. It's a quiet series this round, which I think we needed after
the churn of the last few series. This contains:
- Fix for a registration race in loop, from Anton Volkov.
- Overflow complaint fix from Arnd for DAC960.
- Series of drbd changes from the usual suspects.
- Conversion of the stec/skd driver to blk-mq. From Bart.
- A few BFQ improvements/fixes from Paolo.
- CFQ improvement from Ritesh, allowing idling for group idle.
- A few fixes found by Dan's smatch, courtesy of Dan.
- A warning fixup for a race between changing the IO scheduler and
device remova. From David Jeffery.
- A few nbd fixes from Josef.
- Support for cgroup info in blktrace, from Shaohua.
- Also from Shaohua, new features in the null_blk driver to allow it
to actually hold data, among other things.
- Various corner cases and error handling fixes from Weiping Zhang.
- Improvements to the IO stats tracking for blk-mq from me. Can
drastically improve performance for fast devices and/or big
machines.
- Series from Christoph removing bi_bdev as being needed for IO
submission, in preparation for nvme multipathing code.
- Series from Bart, including various cleanups and fixes for switch
fall through case complaints"
* 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits)
kernfs: checking for IS_ERR() instead of NULL
drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set
drbd: Fix allyesconfig build, fix recent commit
drbd: switch from kmalloc() to kmalloc_array()
drbd: abort drbd_start_resync if there is no connection
drbd: move global variables to drbd namespace and make some static
drbd: rename "usermode_helper" to "drbd_usermode_helper"
drbd: fix race between handshake and admin disconnect/down
drbd: fix potential deadlock when trying to detach during handshake
drbd: A single dot should be put into a sequence.
drbd: fix rmmod cleanup, remove _all_ debugfs entries
drbd: Use setup_timer() instead of init_timer() to simplify the code.
drbd: fix potential get_ldev/put_ldev refcount imbalance during attach
drbd: new disk-option disable-write-same
drbd: Fix resource role for newly created resources in events2
drbd: mark symbols static where possible
drbd: Send P_NEG_ACK upon write error in protocol != C
drbd: add explicit plugging when submitting batches
drbd: change list_for_each_safe to while(list_first_entry_or_null)
drbd: introduce drbd_recv_header_maybe_unplug
...
This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).
For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.
Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When gfs2 does metadata I/O, only REQ_META is used as a metadata hint of
the bio. But flag REQ_META is just a hint for block trace, not for block
layer code to handle a bio as metadata request.
For some of metadata I/Os of gfs2, A REQ_PRIO flag on the metadata bio
would be very informative to block layer code. For example, if bcache is
used as a I/O cache for gfs2, it will be possible for bcache code to get
the hint and cache the pre-fetched metadata blocks on cache device. This
behavior may be helpful to improve metadata I/O performance if the
following requests hit the cache.
Here are the locations in gfs2 code where a REQ_PRIO flag should be added,
- All places where REQ_READAHEAD is used, gfs2 code uses this flag for
metadata read ahead.
- In gfs2_meta_rq() where the first metadata block is read in.
- In gfs2_write_buf_to_page(), read in quota metadata blocks to have them
up to date.
These metadata blocks are probably to be accessed again in future, adding
a REQ_PRIO flag may have bcache to keep such metadata in fast cache
device. For system without a cache layer, REQ_PRIO can still provide hint
to block layer to handle metadata requests more properly.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, problems reading in indirect buffers would send
an IO error back to the caller, and release the buffer_head with
brelse() in function gfs2_meta_indirect_buffer, however, it would
still return the address of the buffer_head it released. After the
error was discovered, function gfs2_block_map would call function
release_metapath to free all buffers. That checked:
if (mp->mp_bh[i] == NULL) but since the value was set after the
error, it was non-zero, so brelse was called a second time. This
resulted in the following error:
kernel: WARNING: at fs/buffer.c:1224 __brelse+0x3a/0x40() (Tainted: G W -- ------------ )
kernel: Hardware name: RHEV Hypervisor
kernel: VFS: brelse: Trying to free free buffer
This patch changes gfs2_meta_indirect_buffer so it only sets
the buffer_head pointer in cases where it isn't released.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
1. Andy Price submitted a patch to make gfs2_write_full_page a
static function.
2. Dan Carpenter submitted a patch to fix a ERR_PTR thinko.
I've also got a few patches, three of which fix bugs related to
deleting very large files, which cause GFS2 to run out of
journal space:
3. The first one prevents GFS2 delete operation from requesting too
much journal space.
4. The second one fixes a problem whereby GFS2 can hang because it
wasn't taking journal space demand into its calculations.
5. The third one wakes up IO waiters when a flush is done to restart
processes stuck waiting for journal space to become available.
The other three patches are a performance improvement related to
spin_lock contention between multiple writers:
6. The "tr_touched" variable was switched to a flag to be more atomic
and eliminate the possibility of some races.
7. Function meta_lo_add was moved inline with its only caller to make
the code more readable and efficient.
8. Contention on the gfs2_log_lock spinlock was greatly reduced by
avoiding the lock altogether in cases where we don't really need
it: buffers that already appear in the appropriate metadata list
for the journal. Many thanks to Steve Whitehouse for the ideas and
principles behind these patches.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYrEEEAAoJENeLYdPf93o7bjoIAIqPG/EAzi+idgMWDPQa9Eit
53dPy16snkrbWwtaK6spSWlH6bGYuHeanXORYon9bvtVjKYaa4NQclGihN2IE6uB
O8zT+MGwP45LDhNplVJpumaOALZ9ZDqQSe+3tHeNK3FhNirLyiIjSqrHt/7Yi1qi
fPLlT4Jx0TBo5rhvEGa7Yg01WhWVtnmVSMqJXj/7ZtC50s1aPyDUikdNIDfDCN2X
LxfKGDXuk6p63VQ6JKqYSBVATCR0/bbKfkuk/kBUTYLoHoapImxB8d0HgIdsh1Mv
9PlbZnnNW8k5oapuhVxjl0T5G0JsQgCkPb/wlte+ryOCjBoc2L2fCUV5qc0QxWc=
=xQyl
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.11.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Robert Peterson:
"We've got eight GFS2 patches for this merge window:
- Andy Price submitted a patch to make gfs2_write_full_page a static
function.
- Dan Carpenter submitted a patch to fix a ERR_PTR thinko.
Three patches fix bugs related to deleting very large files, which
cause GFS2 to run out of journal space:
- The first one prevents GFS2 delete operation from requesting too
much journal space.
- The second one fixes a problem whereby GFS2 can hang because it
wasn't taking journal space demand into its calculations.
- The third one wakes up IO waiters when a flush is done to restart
processes stuck waiting for journal space to become available.
The final three patches are a performance improvement related to
spin_lock contention between multiple writers:
- The "tr_touched" variable was switched to a flag to be more atomic
and eliminate the possibility of some races.
- Function meta_lo_add was moved inline with its only caller to make
the code more readable and efficient.
- Contention on the gfs2_log_lock spinlock was greatly reduced by
avoiding the lock altogether in cases where we don't really need
it: buffers that already appear in the appropriate metadata list
for the journal. Many thanks to Steve Whitehouse for the ideas and
principles behind these patches"
* tag 'gfs2-4.11.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Make gfs2_write_full_page static
GFS2: Reduce contention on gfs2_log_lock
GFS2: Inline function meta_lo_add
GFS2: Switch tr_touched to flag in transaction
GFS2: Wake up io waiters whenever a flush is done
GFS2: Made logd daemon take into account log demand
GFS2: Limit number of transaction blocks requested for truncates
GFS2: Fix reference to ERR_PTR in gfs2_glock_iter_next
This patch eliminates the int variable tr_touched in favor of a
new flag in the transaction. This is a step toward reducing contention
on the gfs2_log_lock spin_lock.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Add wbc_to_write_flags(), which returns the write modifier flags to use,
based on a struct writeback_control. No functional changes in this
patch, but it prepares us for factoring other wbc fields for write type.
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Remove the WRITE_* and READ_SYNC wrappers, and just use the flags
directly. Where applicable this also drops usage of the
bio_set_op_attrs wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Commit 39b0555f didn't check for a failing bio_add_page in
gfs2_submit_bhs. This could cause I/O requests to get lost, and the
affected buffer heads to stay locked forever. Fix that by submitting
the current bio and allocating another one when bio_add_page fails. (It
is guaranteed that we can at least add one page to a bio.)
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
These two are confusing leftover of the old world order, combining
values of the REQ_OP_ and REQ_ namespaces. For callers that don't
special case we mostly just replace bi_rw with bio_data_dir or
op_is_write, except for the few cases where a switch over the REQ_OP_
values makes more sense. Any check for READA is replaced with an
explicit check for REQ_RAHEAD. Also remove the READA alias for
REQ_RAHEAD.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Separate the op from the rq_flag_bits and have gfs2
set/get the bio using bio_set_op_attrs/bio_op.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This has ll_rw_block users pass in the operation and flags separately,
so ll_rw_block can setup the bio op and bi_rw flags on the bio that
is submitted.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This has submit_bh users pass in the operation and flags separately,
so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that
is submitted.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw
instead of passing it in. This makes that use the same as
generic_make_request and how we set the other bio fields.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Fixed up fs/ext4/crypto.c
Signed-off-by: Jens Axboe <axboe@fb.com>
- Abhi Das has two patches that fix a GFS2 splice issue (and an adjustment).
- Ben Marzinski has a patch which allows the proper unmount of a GFS2
file system after hitting a withdraw error.
- I have a patch to fix a problem where GFS2 would dereference an error
value, plus three cosmetic / refactoring patches.
- Daniel DeFreez has a patch to fix two glock reference count problems,
where GFS2 was not properly "uninitializing" its glock holder on error
paths.
- Denys Vlasenko has a patch to change a function to not be inlined,
thus reducing the memory footprint of the GFS2 module.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXP2KLAAoJENeLYdPf93o7nScH/jlDCv+JzwBwAiFEVelgB657
lFY+Q3bPvmcTaHiOqXzco7U1EeyvAuZ+x9duaFBBEGC2/NydIbkAdCP1XjDOTAGZ
aVVAP8qov4adFiXTfBdzMYjJ7DArOy/JRnlC8WK5OiD/3yxsXJZNlAHTgjjL/ZMq
PkhjxX2Lc9ZHGF9YIFTyeoBlqf1qO6WbhkxvSNefgq3c702QPM+T9XND5T1duGDF
ThEcXS2DRRoE+6wr3h+ruvS5kcfxXRLLausAgqNpj2FYQOFCQ6XXgGK8pyXA5V/t
3Vh8mHW0VmSjAfrRWslCRjd+APXoOf+7QHqOHUAA1dvQ6CGfC9qTETH9Wp32JCI=
=8g+a
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"We've got nine patches this time:
- Abhi Das has two patches that fix a GFS2 splice issue (and an
adjustment).
- Ben Marzinski has a patch which allows the proper unmount of a GFS2
file system after hitting a withdraw error.
- I have a patch to fix a problem where GFS2 would dereference an
error value, plus three cosmetic / refactoring patches.
- Daniel DeFreez has a patch to fix two glock reference count
problems, where GFS2 was not properly "uninitializing" its glock
holder on error paths.
- Denys Vlasenko has a patch to change a function to not be inlined,
thus reducing the memory footprint of the GFS2 module"
* tag 'gfs2-4.7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Refactor gfs2_remove_from_journal
GFS2: Remove allocation parms from gfs2_rbm_find
gfs2: use inode_lock/unlock instead of accessing i_mutex directly
GFS2: Add calls to gfs2_holder_uninit in two error handlers
GFS2: Don't dereference inode in gfs2_inode_lookup until it's valid
GFS2: fs/gfs2/glock.c: Deinline do_error, save 1856 bytes
gfs2: Use gfs2 wrapper to sync inode before calling generic_file_splice_read()
GFS2: Get rid of dead code in inode_go_demote_ok
GFS2: ignore unlock failures after withdraw
This patch makes two simple changes to function gfs2_remove_from_journal.
First, it removes the parameter that specifies the transaction.
Since it's always passed in as current->journal_info, we might as well
set that in the function rather than passing it in. Second, it changes
the meta parameter to use an enum to make the code more clear.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of submitting a READ_SYNC bio for the inode and a READA bio for
the inode's extended attributes through submit_bh, submit a single READ_SYNC
bio for both through submit_bio when possible. This can be more
efficient on some kinds of block devices.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
When gfs2 allocates an inode and its extended attribute block next to
each other at inode create time, the inode's directory entry indicates
that in de_rahead. In that case, we can readahead the extended
attribute block when we read in the inode.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
What uniquely identifies a glock in the glock hash table is not
gl_name, but gl_name and its superblock pointer. This patch makes
the gl_name field correspond to a unique glock identifier. That will
allow us to simplify hashing with a future patch, since the hash
algorithm can then take the gl_name and hash its components in one
operation.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
aops->write_begin may allocate a new page and make it visible only to have
mark_page_accessed called almost immediately after. Once the page is
visible the atomic operations are necessary which is noticable overhead
when writing to an in-memory filesystem like tmpfs but should also be
noticable with fast storage. The objective of the patch is to initialse
the accessed information with non-atomic operations before the page is
visible.
The bulk of filesystems directly or indirectly use
grab_cache_page_write_begin or find_or_create_page for the initial
allocation of a page cache page. This patch adds an init_page_accessed()
helper which behaves like the first call to mark_page_accessed() but may
called before the page is visible and can be done non-atomically.
The primary APIs of concern in this care are the following and are used
by most filesystems.
find_get_page
find_lock_page
find_or_create_page
grab_cache_page_nowait
grab_cache_page_write_begin
All of them are very similar in detail to the patch creates a core helper
pagecache_get_page() which takes a flags parameter that affects its
behavior such as whether the page should be marked accessed or not. Then
old API is preserved but is basically a thin wrapper around this core
function.
Each of the filesystems are then updated to avoid calling
mark_page_accessed when it is known that the VM interfaces have already
done the job. There is a slight snag in that the timing of the
mark_page_accessed() has now changed so in rare cases it's possible a page
gets to the end of the LRU as PageReferenced where as previously it might
have been repromoted. This is expected to be rare but it's worth the
filesystem people thinking about it in case they see a problem with the
timing change. It is also the case that some filesystems may be marking
pages accessed that previously did not but it makes sense that filesystems
have consistent behaviour in this regard.
The test case used to evaulate this is a simple dd of a large file done
multiple times with the file deleted on each iterations. The size of the
file is 1/10th physical memory to avoid dirty page balancing. In the
async case it will be possible that the workload completes without even
hitting the disk and will have variable results but highlight the impact
of mark_page_accessed for async IO. The sync results are expected to be
more stable. The exception is tmpfs where the normal case is for the "IO"
to not hit the disk.
The test machine was single socket and UMA to avoid any scheduling or NUMA
artifacts. Throughput and wall times are presented for sync IO, only wall
times are shown for async as the granularity reported by dd and the
variability is unsuitable for comparison. As async results were variable
do to writback timings, I'm only reporting the maximum figures. The sync
results were stable enough to make the mean and stddev uninteresting.
The performance results are reported based on a run with no profiling.
Profile data is based on a separate run with oprofile running.
async dd
3.15.0-rc3 3.15.0-rc3
vanilla accessed-v2
ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%)
tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%)
btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%)
ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%)
xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%)
The XFS figure is a bit strange as it managed to avoid a worst case by
sheer luck but the average figures looked reasonable.
samples percentage
ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed
ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed
ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed
xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed
btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed
tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
[akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that rgrps use the address space which is part of the super
block, we need to update gfs2_mapping2sbd() to take account of
that. The only way to do that easily is to use a different set
of address_space_operations for rgrps.
Reported-by: Abhi Das <adas@redhat.com>
Tested-by: Abhi Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Now we have a master transaction into which other transactions
are merged, the accounting can be done using this master
transaction. We no longer require the superblock fields which
were being used for this function.
In addition, this allows for a clean up in calc_reserved()
making it rather easier understand. Also, by reducing the
number of variables used to track the buffers being added
and removed from the journal, a number of error checks are
now no longer required.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Prior to this patch, GFS2 had one address space for each rgrp,
stored in the glock. This patch changes them to use a single
address space in the super block. This therefore saves
(sizeof(struct address_space) * nr_of_rgrps) bytes of memory
and for large filesystems, that can be significant.
It would be nice to be able to do something similar and merge
the inode metadata address space into the same global
address space. However, that is rather more complicated as the
on-disk location doesn't have a 1:1 mapping with the inodes in
general. So while it could be done, it will be a more complicated
operation as it requires changing a lot more code paths.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch fixes a slab memory leak that sometimes can occur
for files with a very short lifespan. The problem occurs when
a dinode is deleted before it has gotten to the journal properly.
In the leak scenario, the bd object is pinned for journal
committment (queued to the metadata buffers queue: sd_log_le_buf)
but is subsequently unpinned and dequeued before it finds its way
to the ail or the revoke queue. In this rare circumstance, the bd
object needs to be freed from slab memory, or it is forgotten.
We have to be very careful how we do it, though, because
multiple processes can call gfs2_remove_from_journal. In order to
avoid double-frees, only the process that does the unpinning is
allowed to free the bd.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since gfs2_sync_meta() is only called from a single file, lets move
it to lops.c where it is used, and mark it static. At the same
time, we can clean up the meta_io.h header too.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch looks at all the outstanding blocks in all the transactions
on the log, and moves the completed ones to the ail2 list. Then it
issues revokes for these blocks. This will hopefully speed things up
in situations where there is a lot of contention for glocks, especially
if they are acquired serially.
revoke_lo_before_commit will issue at most one log block's full of these
preemptive revokes. The amount of reserved log space that
gfs2_log_reserve() ignores has been incremented to allow for this extra
block.
This patch also consolidates the common revoke instructions into one
function, gfs2_add_revoke().
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
In order to allow transactions and log flushes to happen at the same
time, gfs2 needs to move the transaction accounting and active items
list code into the gfs2_trans structure. As a first step toward this,
this patch removes the gfs2_ail structure, and handles the active items
list in the gfs_trans structure. This keeps gfs2 from allocating an ail
structure on log flushes, and gives us a struture that can later be used
to store the transaction accounting outside of the gfs2 superblock
structure.
With this patch, at the end of a transaction, gfs2 will add the
gfs2_trans structure to the superblock if there is not one already.
This structure now has the active items fields that were previously in
gfs2_ail. This is not necessary in the case where the transaction was
simply used to add revokes, since these are never written outside of the
journal, and thus, don't need an active items list.
Also, in order to make sure that the transaction structure is not
removed while it's still in use by gfs2_trans_end, unlocking the
sd_log_flush_lock has to happen slightly later in ending the
transaction.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The locking in gfs2_attach_bufdata() was type specific (data/meta)
which made the function rather confusing. This patch moves the core
of gfs2_attach_bufdata() into trans.c renaming it gfs2_alloc_bufdata()
and moving the locking into gfs2_trans_add_data()/gfs2_trans_add_meta()
As a result all of the locking related to adding data and metadata to
the journal is now in these two functions. This should help to clarify
what is going on, and give us some opportunities to simplify in
some cases.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The pdflush thread is long gone, so this patch removes references to pdflush
from gfs comments.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch fixes buffer_head double free in following code path:
gfs2_block_map
=> gfs2_meta_inode_buffer
=> gfs2_meta_indirect_buffer
=> gfs2_meta_read
=> release_metapath
gfs2_block_map calls gfs2_meta_inode_buffer with &mp.mp_bh[0]
as an argument. mp.mp_bh are filled with zero at the beginning
of gfs2_block_map.
If gfs2_meta_inode_buffer returns non-zero value, gfs2_block_map
calls release_metapath to free buffers chained to mp.mp_bh.
release_metapath checks each slot of mp.mp_bh[i] and
free(with brelse) unless the slot is filled with NULL.
&mp.mp_bh[0] passed to gfs2_meta_inode_buffer is filled at
gfs2_meta_read. gfs2_meta_read is filled a buffer allocated with
gfs2_getbuf even if EIO occurs. When EIO occurs, the allocated buffer
is brelse'ed though the pointer(wrong poiner) points the brelse'ed is
passed back to caller via an argument bhp.
gfs2_meta_indirect_buffer, the caller also pass the wrong pointer
to its caller with EIO. Finally gfs2_block_map gets both EIO and
&mp.mp_bh[0] filled with the wrong pointer. release_metapath
calls brelse again on the wrong pointer.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
It turns out that the "new" parameter to function gfs2_meta_indirect_buffer
was always being passed in as zero. Therefore, this patch eliminates it
and simplifies the function.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch eliminates the gfs2_log_element data structure and
rolls its two components into the gfs2_bufdata. This makes the code
easier to understand and makes it easier to migrate to a rbtree
to keep the list sorted.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is another clean up in the logging code. This per-transaction
list was largely unused. Its main function was to ensure that the
number of buffers in a transaction was correct, however that counter
was only used to check the number of buffers in the bd_list_tr, plus
an assert at the end of each transaction. With the assert now changed
to use the calculated buffer counts, we can remove both bd_list_tr and
its associated counter.
This should make the code easier to understand as well as shrinking
a couple of structures.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Christoph has split up REQ_PRIO from REQ_META. That means that
we can drop REQ_PRIO from places where is it not needed. I'm
not at all sure that the combination WRITE_FLUSH_FUA | REQ_PRIO
makes any kind of sense, anyway.
In addition, I've added REQ_META to one place in the code where
it was missing. REQ_PRIO has been left for read/writes triggered
by glock acquisition and writeback only. We can adjust it again
if required, but these are the most important points from a
performance perspective.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Add a new REQ_PRIO to let requests preempt others in the cfq I/O schedule,
and lave REQ_META purely for marking requests as metadata in blktrace.
All existing callers of REQ_META except for XFS are updated to also
set REQ_PRIO for now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This adds support for two new flags. One keeps track of whether
the glock is on the LRU list or not. The other isn't really a
flag as such, but an indication of whether the glock has an
attached object or not. This indication is reported without
any locking, which is ok since we do not dereference the object
pointer but merely report whether it is NULL or not.
Also, this fixes one place where a tracepoint was missing, which
was at the point we remove deallocated blocks from the journal.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
Documentation/iostats.txt: bit-size reference etc.
cfq-iosched: removing unnecessary think time checking
cfq-iosched: Don't clear queue stats when preempt.
blk-throttle: Reset group slice when limits are changed
blk-cgroup: Only give unaccounted_time under debug
cfq-iosched: Don't set active queue in preempt
block: fix non-atomic access to genhd inflight structures
block: attempt to merge with existing requests on plug flush
block: NULL dereference on error path in __blkdev_get()
cfq-iosched: Don't update group weights when on service tree
fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
block: Require subsystems to explicitly allocate bio_set integrity mempool
jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
fs: make fsync_buffers_list() plug
mm: make generic_writepages() use plugging
blk-cgroup: Add unaccounted time to timeslice_used.
block: fixup plugging stubs for !CONFIG_BLOCK
block: remove obsolete comments for blkdev_issue_zeroout.
blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
...
Fix up conflicts in fs/{aio.c,super.c}
The previous patch missed a couple of places where the AIL list
needed locking, so this fixes up those places, plus a comment
is corrected too.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Chinner <dchinner@redhat.com>
With the plugging now being explicitly controlled by the
submitter, callers need not pass down unplugging hints
to the block layer. If they want to unplug, it's because they
manually plugged on their own - in which case, they should just
unplug at will.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This removes more dead code that was somehow missed by commit 0d99519efe
(writeback: remove unused nonblocking and congestion checks). There are
no behavior change except for the removal of two entries from one of the
ext4 tracing interface.
The nonblocking checks in ->writepages are no longer used because the
flusher now prefer to block on get_request_wait() than to skip inodes on
IO congestion. The latter will lead to more seeky IO.
The nonblocking checks in ->writepage are no longer used because it's
redundant with the WB_SYNC_NONE check.
We no long set ->nonblocking in VM page out and page migration, because
a) it's effectively redundant with WB_SYNC_NONE in current code
b) it's old semantic of "Don't get stuck on request queues" is mis-behavior:
that would skip some dirty inodes on congestion and page out others, which
is unfair in terms of LRU age.
Inspired by Christoph Hellwig. Thanks!
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: David Howells <dhowells@redhat.com>
Cc: Sage Weil <sage@newdream.net>
Cc: Steve French <sfrench@samba.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the current bio flags and reuse the request flags for the bio, too.
This allows to more easily trace the type of I/O from the filesystem
down to the block driver. There were two flags in the bio that were
missing in the requests: BIO_RW_UNPLUG and BIO_RW_AHEAD. Also I've
renamed two request flags that had a superflous RW in them.
Note that the flags are in bio.h despite having the REQ_ name - as
blkdev.h includes bio.h that is the only way to go for now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This patch removes an unneeded "err" variable that is always
returned as zero.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch contains various tweaks to how log flushes and active item writeback
work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits
for gfs2_logd to do the log flushing. Multiple functions were rewritten to
remove the need to call gfs2_log_lock(). Instead of using one test to see if
gfs2_logd had work to do, there are now seperate tests to check if there
are two many buffers in the incore log or if there are two many items on the
active items list.
This patch is a port of a patch Steve Whitehouse wrote about a year ago, with
some minor changes. Since gfs2_ail1_start always submits all the active items,
it no longer needs to keep track of the first ai submitted, so this has been
removed. In gfs2_log_reserve(), the order of the calls to
prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has
been switched. If it called wake_up first there was a small window for a race,
where logd could run and return before gfs2_log_reserve was ready to get woken
up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve()
would be left waiting for gfs2_logd to eventualy run because it timed out.
Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times
out, and flushes the log, can now be set on mount with ar_commit.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since the start of GFS2, an "extra" inode has been used to store
the metadata belonging to each inode. The only reason for using
this inode was to have an extra address space, the other fields
were unused. This means that the memory usage was rather inefficient.
The reason for keeping each inode's metadata in a separate address
space is that when glocks are requested on remote nodes, we need to
be able to efficiently locate the data and metadata which relating
to that glock (inode) in order to sync or sync and invalidate it
(depending on the remotely requested lock mode).
This patch adds a new type of glock, which has in addition to
its normal fields, has an address space. This applies to all
inode and rgrp glocks (but to no other glock types which remain
as before). As a result, we no longer need to have the second
inode.
This results in three major improvements:
1. A saving of approx 25% of memory used in caching inodes
2. A removal of the circular dependency between inodes and glocks
3. No confusion between "normal" and "metadata" inodes in super.c
Although the first of these is the more immediately apparent, the
second is just as important as it now enables a number of clean
ups at umount time. Those will be the subject of future patches.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>