Commit Graph

1079 Commits

Author SHA1 Message Date
Olof Johansson
c6b659c005 ARM: tegra: core code changes for 3.17
Some of the code that's currently called from the Tegra machine setup
 code is moved to regular initcalls. To catch dependency violations, the
 various code paths now WARN if they're called to early. Not all of the
 potential candidates are converted yet, but those that were have been
 verified to work across all supported Tegra generations.
 
 A new function, soc_is_tegra(), is also provided to make sure that the
 initcalls can abort early if they aren't run on Tegra, which can happen
 for multi-platform builds.
 
 Finally this also moves out the PMC driver to drivers/soc/tegra so that
 it can be shared with 64-bit ARM.
 
 This is based on the for-3.17/fuse-move branch. The split is somewhat
 arbitrary but allows the dependents of the for-3.17/fuse-move to pull
 in as little code as necessary.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIbBAABAgAGBQJTySPxAAoJEN0jrNd/PrOhVIAP+N6yVxQa/8sMYpy7ohr2b/ZP
 IcevK+9Q3mZYzxVoI1am1p11louZgGFE11yuvI2kmjTLg9UcFC+O6iEc05XvIIIC
 nVLg4V1F5VWyv0BtnqTAuMX+hOqj9ZFx5Xuq0rpulKLs9aygkKEJnI0eOyMDbnAN
 OsGmhOeblZkgS0Gk9Dg9NiFPpQ/sl6LRZDoVpYA+fKEb6SCxei5Z48aaUhhHwq2k
 IVQUcMWz9k4mPjWO9OcO2gkDaq79OYWzk/DP4hFk5telZAkGjJg+UdNWIXSPg9A/
 sjMxpkRpTR8sDVPZ3n1YnxJ9sUV3Q88SmN+x78W0QGNbLxELU8Fhd2xPVrA2PAIG
 +uP0DKkrDi+AV3euEBOIOKTMptrgGDPigT+b127vxUigbQ3D90SV9xN0+/+NaLcv
 J3msHcjFo9IW03a5q8DBdkeIy4xs7uZW9uR72ie1uUtv2oLkoS/qrwxauj3x8J52
 dqtY98xCPtFQnR2HyT7VRLBibGq0zelQ9aYENy5Su+3UI73AIG15ztzrOcEvN8Cc
 DAbBKgix63TlJF51VlCCLGUMpt1StDoia8A3iMIqNEu/CJqXaqQ/77im4KGybqgm
 JoH7OHVhewDBxVg2XfwcDX8TnmMQjLTMkzLG8oSg7uAqyrJm0xkC7ttx4gPRlSJX
 kEQrfqyjbL3C42+4lgc=
 =w/53
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.17-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/cleanup

Merge "ARM: tegra: core code changes for 3.17" from Thierry Reding:

Some of the code that's currently called from the Tegra machine setup
code is moved to regular initcalls. To catch dependency violations, the
various code paths now WARN if they're called to early. Not all of the
potential candidates are converted yet, but those that were have been
verified to work across all supported Tegra generations.

A new function, soc_is_tegra(), is also provided to make sure that the
initcalls can abort early if they aren't run on Tegra, which can happen
for multi-platform builds.

Finally this also moves out the PMC driver to drivers/soc/tegra so that
it can be shared with 64-bit ARM.

This is based on the for-3.17/fuse-move branch. The split is somewhat
arbitrary but allows the dependents of the for-3.17/fuse-move to pull
in as little code as necessary.

* tag 'tegra-for-3.17-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Convert PMC to a driver
  soc/tegra: fuse: Set up in early initcall
  ARM: tegra: Always lock the CPU reset vector
  ARM: tegra: Setup CPU hotplug in a pure initcall
  soc/tegra: Implement runtime check for Tegra SoCs

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19 12:31:22 -07:00
Olof Johansson
23e892929e ARM: tegra: move fuse code out of arch/arm
This branch moves code related to the Tegra fuses out of arch/arm and
 into a centralized location which could be shared with ARM64. It also
 adds support for reading the fuse data through sysfs.
 
 Included is also some preparatory work that moves Tegra-related header
 files from include/linux to include/soc/tegra as suggested by Arnd.
 
 Furthermore the Tegra chip ID is now retrieved using a function rather
 than a variable so that sanity checks can be done. This is convenient
 in subsequent patches that will move some of the code that's currently
 called from Tegra machine setup into regular initcalls so that it can
 be reused on 64-bit ARM. The sanity checks help with verifying that no
 code tries to obtain the Tegra chip ID before the underlying driver is
 properly initialized.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJTyR7HAAoJEN0jrNd/PrOhXRoQAKIs/o8Xf6aTb48OOODFt8g0
 3GiKaYfVPk6VzkrhywmulOndmYy9BjLwhX2jnPgPzFbM5h2jk39/PK3RtssD92Wm
 sHbDflbCj+gaLvjETbTWtYbbYmejqp2xhte/F+MMT0QJKl8BjmyO6WOoUL1+QEyW
 p+OUYRgasmyAiq7qov1MeMW+edNqFHhHpmnsva62NUbcOaKTJ6U6antm79PoAA9M
 Da3UScoX9BxqsyuxBteLdcpgSgOHjW/eLz9xHVf5gtG4ZsTjkWFRyP9wwY6rCxij
 +6cMvKs8OT2y+TjQ6qv5/Zu+XbXGbo2yujnK2oFkLsST/LWobGfuGXUp/K7CkkKJ
 0wgZS1t2iT3RXSQn/Fz8zJx9j0q3GJmvMFmdrOAh8Vx6ucP1m8DZ4noms37D0+Wn
 2HSW55sAXIUFALZgOiVRq0GXtw/iA76S9GtjfFWkCkyGV4WLH6C1NSoojvmXWQ3U
 QQWlpGODQFYUTDUhwh6/T3cP7Ip12W9OU2eTNfdgn8D+PU16CPSfdXN6JWxBI13L
 vVUxWMm9JG+QkbSjfw4q2A0dHEu6lssmOSvMjU6pm5v6xCfry6Fn6m3vBBU3OpLx
 mOge6U696hwL3tNMuwfsIVFNQpoHJT+2Saq71jS+XZeGn+5wC3ovejREls0HIzze
 kwHNIuMygB78uVwWyMJr
 =XyRE
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.17-fuse-move' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/cleanup

Merge "ARM: tegra: move fuse code out of arch/arm" from Thierry Reding:

This branch moves code related to the Tegra fuses out of arch/arm and
into a centralized location which could be shared with ARM64. It also
adds support for reading the fuse data through sysfs.

Included is also some preparatory work that moves Tegra-related header
files from include/linux to include/soc/tegra as suggested by Arnd.

Furthermore the Tegra chip ID is now retrieved using a function rather
than a variable so that sanity checks can be done. This is convenient
in subsequent patches that will move some of the code that's currently
called from Tegra machine setup into regular initcalls so that it can
be reused on 64-bit ARM. The sanity checks help with verifying that no
code tries to obtain the Tegra chip ID before the underlying driver is
properly initialized.

* tag 'tegra-for-3.17-fuse-move' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: fuse: fix dummy functions
  soc/tegra: fuse: move APB DMA into Tegra20 fuse driver
  soc/tegra: Add efuse and apbmisc bindings
  soc/tegra: Add efuse driver for Tegra
  ARM: tegra: move fuse exports to soc/tegra/fuse.h
  ARM: tegra: export apb dma readl/writel
  ARM: tegra: Use a function to get the chip ID
  ARM: tegra: Sort includes alphabetically
  ARM: tegra: Move includes to include/soc/tegra

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19 12:29:11 -07:00
Russell King
6ebbf2ce43 ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+
ARMv6 and greater introduced a new instruction ("bx") which can be used
to return from function calls.  Recent CPUs perform better when the
"bx lr" instruction is used rather than the "mov pc, lr" instruction,
and this sequence is strongly recommended to be used by the ARM
architecture manual (section A.4.1.1).

We provide a new macro "ret" with all its variants for the condition
code which will resolve to the appropriate instruction.

Rather than doing this piecemeal, and miss some instances, change all
the "mov pc" instances to use the new macro, with the exception of
the "movs" instruction and the kprobes code.  This allows us to detect
the "mov pc, lr" case and fix it up - and also gives us the possibility
of deploying this for other registers depending on the CPU selection.

Reported-by: Will Deacon <will.deacon@arm.com>
Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S
Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood
Tested-by: Shawn Guo <shawn.guo@freescale.com>
Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385
Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci
Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M
Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-18 12:29:04 +01:00
Thierry Reding
7232398abc ARM: tegra: Convert PMC to a driver
This commit converts the PMC support code to a platform driver. Because
the boot process needs to call into this driver very early, also set up
a minimal environment via an early initcall.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 14:58:43 +02:00
Thierry Reding
24fa5af810 soc/tegra: fuse: Set up in early initcall
Rather than rely on explicit initialization order called from SoC setup
code, use a plain initcall and rely on initcall ordering to take care of
dependencies.

This driver exposes some functionality (querying the chip ID) needed at
very early stages of the boot process. An early initcall is good enough
provided that some of the dependencies are deferred to later stages. To
make sure any abuses are easily caught, output a warning message if the
chip ID is queried while it can't be read yet.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 14:58:42 +02:00
Thierry Reding
c090e11163 ARM: tegra: Always lock the CPU reset vector
Currently the reset vector is not locked on Tegra20 because the hardware
doesn't support it. However in order not to depend on the chip ID, which
becomes available only later in the boot process, we set the bit anyway.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 14:58:42 +02:00
Thierry Reding
05ccf19602 ARM: tegra: Setup CPU hotplug in a pure initcall
CPU hotplug support doesn't have to be set up until fairly late in the
boot process, so it can be done in a regular initcall. To make sure that
we don't miss any ordering problems in the future, output a warning if
any of the functions are called before initialization has completed.

This is part of untangling the boot order dependencies on Tegra so that
more code can be shared between 32-bit and 64-bit ARM.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 14:58:41 +02:00
Peter De Schrijver
0d827a4343 soc/tegra: fuse: move APB DMA into Tegra20 fuse driver
The Tegra20 fuse driver is the only user of tegra_apb_readl_using_dma().
Therefore we can simply the code by incorporating the APB DMA handling into
the driver directly. tegra_apb_writel_using_dma() is dropped because there
are no users.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 14:37:12 +02:00
Peter De Schrijver
783c8f4c84 soc/tegra: Add efuse driver for Tegra
Implement fuse driver for Tegra20, Tegra30, Tegra114 and Tegra124. This
replaces functionality previously provided in arch/arm/mach-tegra, which
is removed in this patch.

While at it, move the only user of the global tegra_revision variable
over to tegra_sku_info.revision and export tegra_fuse_readl() to allow
drivers to read calibration fuses.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 14:36:01 +02:00
Peter De Schrijver
35874f3617 ARM: tegra: move fuse exports to soc/tegra/fuse.h
All fuse related functionality will move to a driver in the following
patches. To prepare for this, export all the required functionality in a
global header file and move all users of fuse.h to soc/tegra/fuse.h.

While we're at it, remove tegra_bct_strapping, as its only user was
removed in Commit a7cbe92cef ("ARM: tegra: remove tegra EMC scaling
driver").

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 14:32:51 +02:00
Peter De Schrijver
3f394f8064 ARM: tegra: export apb dma readl/writel
Export APB DMA readl and writel. These are needed because we can't
access the fuses directly on Tegra20 without potentially causing a
system hang. Also have the APB DMA readl and writel return an error in
case of a read failure instead of just returning zero or ignore write
failures.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 13:36:44 +02:00
Thierry Reding
304664eab9 ARM: tegra: Use a function to get the chip ID
Instead of using a simple variable access to get at the Tegra chip ID,
use a function so that we can run additional code. This can be used to
determine where the chip ID is being accessed without being available.
That in turn will be handy for resolving boot sequence dependencies in
order to convert more code to regular initcalls rather than a sequence
fixed by Tegra SoC setup code.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 13:36:41 +02:00
Thierry Reding
a0524acc94 ARM: tegra: Sort includes alphabetically
If these aren't sorted alphabetically, then the logical choice is to
append new ones, however that creates a lot of potential for conflicts
because every change will then add new includes in the same location.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 13:29:57 +02:00
Thierry Reding
306a7f9139 ARM: tegra: Move includes to include/soc/tegra
In order to not clutter the include/linux directory with SoC specific
headers, move the Tegra-specific headers out into a separate directory.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 13:26:47 +02:00
Linus Torvalds
58c72f94ef ARM: SoC fixes for 3.16
A first set of bug fixes that didn't make it for the merge window, and
 two Kconfig cleanups that still make sense at this point. Unfortunately,
 one of the two cleanups caused an unintended change in the original
 version, so we had to revert one part of it and do some more testing
 to ensure the rest is really fine. There was also a last-minute
 rebase of the patches to remove another bad commit.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAU6BdV2CrR//JCVInAQJHhRAAuBdFsBo1TuP/s45PHzcldEcmrlMa2aNx
 5t+qGxaYJW3DppW5Ql4L3O/74au77AcPpto8CwTRzshb2peXYwJ40RQXAyxPyE4z
 a2yjtz7VwX5P/BNjQZJ1OZLuMiMbVVz3ObIpNiPzooXm/y52ZZQ20AALmJcX7mor
 tAmdw3qmvy0L9SYikKd8qKuDTMLV6MWexa/fZn5AA5w11V3DWr/++/6+3g4+tQs8
 N8l5vk9Ok/5l+f67Ta0+R4Vh9OIcLnwYSzOKKhKebwMvxXcwPEz5HfmOSH/m3Zu1
 /dC4jWwB6Z95bevhJCoNaIf9b6s29EYy2lHw3nVRiQEFTmFACNgWjqFjiKa0aune
 2cKAPZAf3w8R15LveT9SuSwtuH8yVFVHqOyzUlxmbFszIqgzKxF933R7SSxQpLTn
 od5QVOqxMAMd4s6Jij7xgoF5GkvlKpfqEERKSz/Gt7I+ZINcxRhXXL55emy6IGmx
 jjhQa83mMgFS70Ys4ARB0Fcd1Em4v/fCPJE8UpSQHQOG3fq3QcdyxsKG0cHUJNK6
 ubS8W/XpQWvowJZ1YcnpYs3zAYchwueNPyCXVX9Hs3BTx7/3wnFfUNbdduD2GRVu
 iruBt+B/4KLHmiLQyt1TqZO1elel/CT/ARGvRjo8zMFoo2WXbopv1pjm7AQQ0SSb
 CtK7u+xxUa8=
 =/Ylr
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "A first set of bug fixes that didn't make it for the merge window, and
  two Kconfig cleanups that still make sense at this point.

  Unfortunately, one of the two cleanups caused an unintended change in
  the original version, so we had to revert one part of it and do some
  more testing to ensure the rest is really fine.  There was also a
  last-minute rebase of the patches to remove another bad commit"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: use menuconfig for sub-arch menus
  ARM: multi_v7_defconfig: re-enable SDHCI drivers
  ARM: EXYNOS: Fix compilation warning
  ARM: exynos: move sysram info to exynos.c
  ARM: dts: Specify the NAND ECC scheme explicitly on Armada 385 DB board
  ARM: dts: Specify the NAND ECC scheme explicitly on Armada 375 DB board
  ARM: exynos: cleanup kconfig option display
  misc: vexpress: fix error handling vexpress_syscfg_regmap_init()
  ARM: Remove ARCH_HAS_CPUFREQ config option
  ARM: integrator: fix section mismatch problem
  ARM: mvebu: DT: fix OpenBlocks AX3-4 RAM size
  ARM: samsung: make SAMSUNG_DMADEV optional
  remoteproc: da8xx: don't select CMA on no-MMU
  bus/arm-cci: add dependency on OF && CPU_V7
  ARM: keystone requires ARM_PATCH_PHYS_VIRT
  ARM: omap2: fix am43xx dependency on l2x0 cache
2014-06-19 17:53:20 -10:00
Rob Herring
21278aeafb ARM: use menuconfig for sub-arch menus
The System Type menu is getting quite long with platforms and is
inconsistent in handling of sub-arch specific options. Tidy up the menu
by making platform options a menuconfig entry containing any platform
specific config items.

[arnd: change OMAP part according to suggestion from
 Tony Lindgren <tony@atomide.com>]

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-17 17:09:48 +02:00
Stephen Boyd
19682f72f5 ARM: Remove ARCH_HAS_CPUFREQ config option
This config exists entirely to hide the cpufreq menu from the
kernel configuration unless a platform has selected it. Nothing
is actually built if this config is 'Y' and it just leads to more
patches that add a select under a platform Kconfig so that some
other CPUfreq option can be chosen. Let's remove the option so
that we can always enable CPUfreq drivers on ARM platforms.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-17 17:09:39 +02:00
Linus Torvalds
f9da455b93 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov.

 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J
    Benniston.

 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn
    Mork.

 4) BPF now has a "random" opcode, from Chema Gonzalez.

 5) Add more BPF documentation and improve test framework, from Daniel
    Borkmann.

 6) Support TCP fastopen over ipv6, from Daniel Lee.

 7) Add software TSO helper functions and use them to support software
    TSO in mvneta and mv643xx_eth drivers.  From Ezequiel Garcia.

 8) Support software TSO in fec driver too, from Nimrod Andy.

 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli.

10) Handle broadcasts more gracefully over macvlan when there are large
    numbers of interfaces configured, from Herbert Xu.

11) Allow more control over fwmark used for non-socket based responses,
    from Lorenzo Colitti.

12) Do TCP congestion window limiting based upon measurements, from Neal
    Cardwell.

13) Support busy polling in SCTP, from Neal Horman.

14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru.

15) Bridge promisc mode handling improvements from Vlad Yasevich.

16) Don't use inetpeer entries to implement ID generation any more, it
    performs poorly, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
  rtnetlink: fix userspace API breakage for iproute2 < v3.9.0
  tcp: fixing TLP's FIN recovery
  net: fec: Add software TSO support
  net: fec: Add Scatter/gather support
  net: fec: Increase buffer descriptor entry number
  net: fec: Factorize feature setting
  net: fec: Enable IP header hardware checksum
  net: fec: Factorize the .xmit transmit function
  bridge: fix compile error when compiling without IPv6 support
  bridge: fix smatch warning / potential null pointer dereference
  via-rhine: fix full-duplex with autoneg disable
  bnx2x: Enlarge the dorq threshold for VFs
  bnx2x: Check for UNDI in uncommon branch
  bnx2x: Fix 1G-baseT link
  bnx2x: Fix link for KR with swapped polarity lane
  sctp: Fix sk_ack_backlog wrap-around problem
  net/core: Add VF link state control policy
  net/fsl: xgmac_mdio is dependent on OF_MDIO
  net/fsl: Make xgmac_mdio read error message useful
  net_sched: drr: warn when qdisc is not work conserving
  ...
2014-06-12 14:27:40 -07:00
Linus Torvalds
eb3d3ec567 Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into next
Pull ARM updates from Russell King:

 - Major clean-up of the L2 cache support code.  The existing mess was
   becoming rather unmaintainable through all the additions that others
   have done over time.  This turns it into a much nicer structure, and
   implements a few performance improvements as well.

 - Clean up some of the CP15 control register tweaks for alignment
   support, moving some code and data into alignment.c

 - DMA properties for ARM, from Santosh and reviewed by DT people.  This
   adds DT properties to specify bus translations we can't discover
   automatically, and to indicate whether devices are coherent.

 - Hibernation support for ARM

 - Make ftrace work with read-only text in modules

 - add suspend support for PJ4B CPUs

 - rework interrupt masking for undefined instruction handling, which
   allows us to enable interrupts earlier in the handling of these
   exceptions.

 - support for big endian page tables

 - fix stacktrace support to exclude stacktrace functions from the
   trace, and add save_stack_trace_regs() implementation so that kprobes
   can record stack traces.

 - Add support for the Cortex-A17 CPU.

 - Remove last vestiges of ARM710 support.

 - Removal of ARM "meminfo" structure, finally converting us solely to
   memblock to handle the early memory initialisation.

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (142 commits)
  ARM: ensure C page table setup code follows assembly code (part II)
  ARM: ensure C page table setup code follows assembly code
  ARM: consolidate last remaining open-coded alignment trap enable
  ARM: remove global cr_no_alignment
  ARM: remove CPU_CP15 conditional from alignment.c
  ARM: remove unused adjust_cr() function
  ARM: move "noalign" command line option to alignment.c
  ARM: provide common method to clear bits in CPU control register
  ARM: 8025/1: Get rid of meminfo
  ARM: 8060/1: mm: allow sub-architectures to override PCI I/O memory type
  ARM: 8066/1: correction for ARM patch 8031/2
  ARM: 8049/1: ftrace/add save_stack_trace_regs() implementation
  ARM: 8065/1: remove last use of CONFIG_CPU_ARM710
  ARM: 8062/1: Modify ldrt fixup handler to re-execute the userspace instruction
  ARM: 8047/1: rwsem: use asm-generic rwsem implementation
  ARM: l2c: trial at enabling some Cortex-A9 optimisations
  ARM: l2c: add warnings for stuff modifying aux_ctrl register values
  ARM: l2c: print a warning with L2C-310 caches if the cache size is modified
  ARM: l2c: remove old .set_debug method
  ARM: l2c: kill L2X0_AUX_CTRL_MASK before anyone else makes use of this
  ...
2014-06-05 15:57:04 -07:00
Linus Torvalds
825f4e0271 ARM: SoC updates for 3.16 (part 1)
A quite large set of SoC updates this cycle. In no particular order:
 
 - Multi-cluster power management for Samsung Exynos, adding support for
   big.LITTLE CPU switching on EXYNOS5
 - SMP support for Marvell Armada 375 and 38x
 - SMP rework on Allwinner A31
 - Xilinx Zynq support for SOC_BUS, big endian
 - Marvell orion5x platform cleanup, modernizing the implementation and
   moving to DT.
 - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so
   that their platform can be enabled in the same kernel binary as most
   of the other v7 platforms in the tree. \o/ The work isn't quite complete,
   there's some driver fixes still needed, but the basics now work.
 
 New SoC support added:
 - Freescale i.MX6SX
 - LSI Axxia AXM55xx SoCs
 - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800
 - STi STIH407
 
 Plus a large set of various smaller updates for different platforms. I'm
 probably missing some important one here.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTjOKWAAoJEIwa5zzehBx36aEP/2vTD7x9FC59FACNHJ8iO7aw
 0ebTgBBjI1Np6X18O+M7URbxV5TaBgwpUm/NDN86p03MpQ2eOXr8r47qVxe/HhZs
 AdlTvzgE6QwxcVL/HeCKKUEN3BPH74+TZgFl9I5aSzNjpR39xETeK1aWP/ZiAl/q
 /lGRZAQ59+c7Ung00Hg0g2YDxH9WFpK50Nj90ROnyjKSFkhIYngXYVpZB3maOypq
 Pgib/U8IraKZ52oGJw3yinSoORr7FdcUdAGWGTz/lQdNL/jYDfQ6GkRW2oblWXdt
 3Xvj9UW6NmkbMICucMvFuuW1nXAgutZuTp9w7mBxsiUlYepxPv/DXM6yiI1WGlEb
 BeVOmOreNeN2nT6avv/uUhk3Osq63Jn9x8cz5y+7/lgWQwllh3/c+G01RotvgJEQ
 vpQq5ps9fMxIAMaNP6N/YqMJI1IOrBj0iXxaZEDw3VYM/k4lSvtb3VXP9c/rqApu
 U4i6hpSIGzrraU4NrjndYPndcLeNOVZbByETQKosZXuCo6G1sb7FstNSkzI9vSo8
 O/pujIVUfYyBW82GzZGDw+aa7DWA29FPeUQ3p+sj5MSCg051xXT8h6QwqMo2K/zY
 5ATs/qo6w7zH/Ou9rtHTRynCIb0GQJThDSlWtuXFedUF9quEltS+TDz/2o+dWtGJ
 yBFGKDRuBB20D36w9xqg
 =6LYI
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull part one of ARM SoC updates from Olof Johansson:
 "A quite large set of SoC updates this cycle.  In no particular order:

   - Multi-cluster power management for Samsung Exynos, adding support
     for big.LITTLE CPU switching on EXYNOS5

   - SMP support for Marvell Armada 375 and 38x

   - SMP rework on Allwinner A31

   - Xilinx Zynq support for SOC_BUS, big endian

   - Marvell orion5x platform cleanup, modernizing the implementation
     and moving to DT.

   - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so
     that their platform can be enabled in the same kernel binary as
     most of the other v7 platforms in the tree.  \o/

     The work isn't quite complete, there's some driver fixes still
     needed, but the basics now work.

  New SoC support added:

   - Freescale i.MX6SX

   - LSI Axxia AXM55xx SoCs

   - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800

   - STi STIH407

  plus a large set of various smaller updates for different platforms.
  I'm probably missing some important one here"

* tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits)
  ARM: exynos: don't run exynos4 l2x0 setup on other platforms
  ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug
  ARM: EXYNOS: mcpm rename the power_down_finish
  ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC
  ARM: EXYNOS: Enable multi-platform build support
  ARM: EXYNOS: Consolidate Kconfig entries
  ARM: EXYNOS: Add support for EXYNOS5410 SoC
  ARM: EXYNOS: Support secondary CPU boot of Exynos3250
  ARM: EXYNOS: Add Exynos3250 SoC ID
  ARM: EXYNOS: Add 5800 SoC support
  ARM: EXYNOS: initial board support for exynos5260 SoC
  clk: exynos5410: register clocks using common clock framework
  ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084
  ARM: sunxi: allow building without reset controller
  Documentation: devicetree: arm: sort enable-method entries
  ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE
  clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks
  ARM: dts: axxia: Add reset controller
  power: reset: Add Axxia system reset driver
  ARM: axxia: Adding defconfig for AXM55xx
  ...
2014-06-02 16:15:12 -07:00
Russell King
00123d9a8d ARM: l2c: tegra: convert to generic l2c OF initialisation
Remove the explicit call to l2x0_of_init(), converting to the generic
infrastructure instead.

Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30 00:50:15 +01:00
Russell King
b16cee70fd ARM: l2c: tegra: convert to common l2c310 early resume functionality
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30 00:50:12 +01:00
Russell King
f9040550be ARM: l2c: tegra: remove cache size override
The cache size should already be present in the L2 cache auxiliary
control register: it is part of the integration process to configure
the hardware IP.  Most platforms get this right, yet still many
cargo-cult program, and assume that they always need specifying to
the L2 cache code.  Remove them so we can find out which really need
this.

Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30 00:50:10 +01:00
Russell King
36bccb11a4 ARM: l2c: remove platforms/SoCs setting early BRESP
Since we now automatically enable early BRESP in core L2C-310 code when
we detect a Cortex-A9, we don't need platforms/SoCs to set this bit
explicitly.  Instead, they should seek to preserve the value of bit 30
in the auxiliary control register.

Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30 00:48:51 +01:00
Russell King
1a5a954ce0 ARM: l2c: fix register naming
We have a mixture of different devices with different register layouts,
but we group all the bits together in an opaque mess.  Split them out
into those which are L2C-310 specific and ones which refer to earlier
devices.  Provide full auxiliary control register definitions.

Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30 00:48:43 +01:00
Will Deacon
08d38bebb4 ARM: kconfig: allow PCI support to be selected with ARCH_MULTIPLATFORM
When targetting ARCH_MULTIPLATFORM, we may include support for SoCs with
PCI-capable devices (e.g. mach-virt with virtio-pci).

This patch allows PCI support to be selected for these SoCs by selecting
CONFIG_MIGHT_HAVE_PCI when CONFIG_ARCH_MULTIPLATFORM=y and removes the
individual selections from multi-platform enabled SoCs.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 12:42:38 -07:00
John W. Linville
9db7cb6901 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem 2014-05-27 13:51:31 -04:00
Olof Johansson
9706c077d8 ARM: tegra: core code changes for 3.16
This branch contains just a single patch this time around. Thierry
 enhanced Tegra's restart code to allow programming PMC scratch registers
 to request specific behaviour after reboot. One of the most useful
 options for mainline software is the ability to reboot directly into USB
 recovery mode, which e.g. allows the bootloader to be reflashed.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTdlZ5AAoJEMzrak5tbycxzBYP/3w8M/VNvK79hkPwAzvHUi2U
 xh4eDX1LrUv8KvXXYCEtZ9+m3fpDSsmUurvAZipBNpdt28ELWKWT9iUQzhmQs0dc
 8FqvqRrl1BNeY+35J0wmxrUv7Q2m41AQnOIQmm5VC0WiR5Na4GzUvCqm8GCjrMse
 TnF3/a12p+IlVxcP966/LFR5H00FPtrhTgi4GiU+jIsqjPNPUw2/6GfV1GzqJscH
 okJe5uAwDUrJiXvk1oJvyXS9qTLiiC2FOK2iBVzfr6pVo/JBcm4KQuMUnmXtrJau
 f+juCeM4bLGrNiOZzvgwuhlWCU83GeJ5J5dXKOAsZe/LOvkhiZOOGHMod4hVS3nT
 BYdv9rL66qHkvNkwxYqxnNOphPpqdrX5PbxOcBKQ4Wq8BCfOmbRvwPUt9YslYEK1
 md5/HQCBefyn7B5cjnRc/hUf1pLIH1cqzub2jSYYgiiBV/LBr5mSUZQUqV9cujqI
 J+Io8txiXkAFZ9hFgny+/knJV4MHhg/d3Ml/EicoGwZeL0mmnbtMc3qvTXkrIca6
 DBp8uCe2AP9KrEI3sHxILUyTA45ujPWT5z41v4jvmrTSJ8kQlzlEVqNdASWPxNOH
 g/wfIJqkY6JvkDJdwGvu1UusjrvuySQRJpLBtMl2N0aVb3JFB4v9GayAn5ijcqof
 yn2qq5S+NHCMdtp8AnXs
 =l5yt
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.16-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc

Merge "ARM: tegra: core code changes for 3.16" from Stephen Warren:

This branch contains just a single patch this time around. Thierry
enhanced Tegra's restart code to allow programming PMC scratch registers
to request specific behaviour after reboot. One of the most useful
options for mainline software is the ability to reboot directly into USB
recovery mode, which e.g. allows the bootloader to be reflashed.

* tag 'tegra-for-3.16-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Support reboot modes

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-21 15:04:52 -07:00
Thierry Reding
498bb3da7e ARM: tegra: Support reboot modes
The boot ROM on Tegra SoCs supports booting into forced recovery mode
(RCM) by setting a bit in the PMC scratch register 0. Similarily, the
Android bootloader examines some of the bits in this register to disable
autoboot or enter recovery mode.

Support these modes by setting the corresponding bits depending on the
specified reboot command (forced-recovery, bootloader, recovery). Recent
systemd-based distributions allow this to be specified using an optional
argument to the reboot command.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-05-07 09:58:03 -06:00
John W. Linville
68b422db3d Merge branch 'rfkill-gpio-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next 2014-05-06 14:43:34 -04:00
Paul Bolle
cab4d50389 ARM: tegra: remove TEGRA_EMC_SCALING_ENABLE
Commit a7cbe92cef ("ARM: tegra: remove tegra EMC scaling driver")
removed the only user of TEGRA_EMC_SCALING_ENABLE. Remove its Kconfig
entry too.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-24 15:29:12 +02:00
Heikki Krogerus
7bd494491b ARM: tegra: remove obsolete gpio entries
After moving to description based gpio interface in
rfkill-gpio, the gpio numbers are not used any more.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Marc Dietrich <marvin24@gmx.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-11 09:28:16 +02:00
Linus Torvalds
ff050ad12c ARM: SoC specific changes
Lots of changes specific to one of the SoC families. Some that
 stick out are:
 
 * mach-qcom gains new features, most importantly SMP support for
   the newer chips (Stephen Boyd, Rohit Vaswani)
 * mvebu gains support for three new SoCs: Armada 375, 380 and 385
   (Thomas Petazzoni and Free-electrons team)
 * SMP support for Rockchips (Heiko Stübner)
 * Lots of i.MX changes (Shawn Guo)
 * Added support for BCM5301x SoC (Hauke Mehrtens)
 * Multiplatform support for Marvell Kirkwood and Dove
   (Andrew Lunn and Sebastian Hesselbarth doing the final part
   of a long journey)
 * Unify davinci platforms and remove obsolete ones (Sekhar Nori,
   Arnd Bergmann)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUz/yT2CrR//JCVInAQJN8A/9Ft1rfp4LEe8Lpr9yAZydG4UaJKy8Hh7Z
 fmohMAuy88J+8jzdwQKKCeEiId+nIf+WmFIQDn9YRDev1/T2v32Ax49XuGtY47JX
 4loIC2wR0+j1aSwhEVOmlM03lX7Hbu6iNDkxaLkDKTRrt3DhDNA6cPZYwNOT273W
 Yx7hIDpvsoOVN3zbPwqhwLrXgywsaNB9E7ly1GixRd1thdg46kMRcM0LJSXPH3we
 pyx7sZbILTVMeUx79XUTvBDJYsbjJWFZknVDYXGkrS5YxAASVsVW2KW9fP9E+UXE
 wTmOxg6spsHGgCezwy8NL5UmfaAOXL3mm6ginFwWpyz7Iu+P5IvfR1W+8UA/O8tp
 K9y8wLA64chPQJkAGaPQBqUPq9QkNHodZWgaPKxKuuv3qF481DCnQKkFRz+sl7mu
 oQVGnoMCnTY6L6yYcIq/GpgiJ731vwefirAwPR8FEBN/gw/gC01b+DDchx/5inPJ
 6V6dCEtPZxXMOsIaYBWFauk3pMFU3E8coklmteyYDQg7eb+55Zq3vsNEpu/vb6ll
 M660AQzzbkZ7lgsSBdNODEvkNH15kC35G2UCfwy99uCE4k/0Vi7reJ1BzXkc+dtJ
 +maBtA6NMALXQ/EI+B+fZLccI4Hv7avwFy1rQJaf+TLiFvTd9yp0qUX8JjXWDPgu
 pPWQOC4a9mU=
 =AGpV
 -----END PGP SIGNATURE-----

Merge tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC specific changes from Arnd Bergmann:
 "Lots of changes specific to one of the SoC families.  Some that stick
  out are:

   - mach-qcom gains new features, most importantly SMP support for the
     newer chips (Stephen Boyd, Rohit Vaswani)
   - mvebu gains support for three new SoCs: Armada 375, 380 and 385
     (Thomas Petazzoni and Free-electrons team)
   - SMP support for Rockchips (Heiko Stübner)
   - Lots of i.MX changes (Shawn Guo)
   - Added support for BCM5301x SoC (Hauke Mehrtens)
   - Multiplatform support for Marvell Kirkwood and Dove (Andrew Lunn
     and Sebastian Hesselbarth doing the final part of a long journey)
   - Unify davinci platforms and remove obsolete ones (Sekhar Nori, Arnd
     Bergmann)"

* tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (126 commits)
  ARM: sunxi: Select HAVE_ARM_ARCH_TIMER
  ARM: cache-tauros2: remove ARMv6 code
  ARM: mvebu: don't select CONFIG_NEON
  ARM: davinci: fix DT booting with default defconfig
  ARM: configs: bcm_defconfig: enable bcm590xx regulator support
  ARM: davinci: remove tnetv107x support
  MAINTAINERS: Update ARM STi maintainers
  ARM: restrict BCM_KONA_UART to ARCH_BCM_MOBILE
  ARM: bcm21664: Add board support.
  ARM: sunxi: Add the new watchog compatibles to the reboot code
  ARM: enable ARM_HAS_SG_CHAIN for multiplatform
  ARM: davinci: remove da8xx_omapl_defconfig
  ARM: davinci: da8xx: fix multiple watchdog device registration
  ARM: davinci: add da8xx specific configs to davinci_all_defconfig
  ARM: davinci: enable da8xx build concurrently with older devices
  ARM: BCM5301X: workaround suppress fault
  ARM: BCM5301X: add early debugging support
  ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU
  ARM: mach-bcm: Remove GENERIC_TIME
  ARM: shmobile: APMU: Fix warnings due to improper printk formats
  ...
2014-04-05 14:19:54 -07:00
Linus Torvalds
dfc25e4503 ARM: SoC: cleanups for 3.15
These cleanup patches are mainly move stuff around and should all
 be harmless. They are mainly split out so that other branches can
 be based on top to avoid conflicts.
 
 Notable changes are:
 
 * We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no
   longer used. (Uwe Kleine-König)
 * The Qualcomm MSM platform is split out into legacy mach-msm and
   new-style mach-qcom, to allow easier maintainance of the new
   hardware support without regressions. (Kumar Gala)
 * A rework of some of the Kconfig logic to simplify multiplatform
   support (Rob Herring)
 * Samsung Exynos gets closer to supporting multiplatform (Sachin
   Kamat and others)
 * mach-bcm3528 gets merged into mach-bcm (Stephen Warren)
 * at91 gains some common clock framework support (Alexandre Belloni,
   Jean-Jacques Hiblot and other French people).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUz/yOWCrR//JCVInAQLOPBAAwTMkMrD8S8ggz6vfiQHZNdRPAC7NUJ46
 +eYKmBVi5d6EdnjNuRElWENsh0ZosSAUFHrXsIC2NdH9sAJ9HOqWNNLymuA59Jo9
 HZ/Ze6xQXDPNV7TROPoXuIli/2OCOXyyQHJsfI7h9V3PCx31qo0B5OdCxU0mtXK6
 r1giREhnJFwfQMF/FTdnzhalFJoSjWwv/nkpNmQDJKRLKj9GzwQqItqw68gV6RzU
 Gnt6YK+9xC1B0cfWTFhAm6kbr9i7mvHoMG5tE3no2uuJMn4K7TgeMqOyvPWhmUeB
 EZi656szT1m5VfRWOqG+7coZO2VM4GO4NI0Xfin3GHllugOYls1il/FAfCPMLiwh
 RvuOmQGCkLIpdkuHop5QaI/h1EzlHA59nzTjmGf1+wWPsm0CIg08XOD9izQbRnN9
 EmRqn1/8POIi17xcWyeMp8LB0APsTI+IflZFaYprEY9VlLLA/Pd+7udULhs8Bq8y
 1l6fB6aPZKnDKCBy/PEIR+y+EHFEbwfrx6zm/pxVDX6P5DlQMFWL78pdBoJUa2h8
 3pm/bSzNU5OSz1nJMLJv2jBTtnM5BvFgQBUi2qJ9Lr+nUhJXKCJ80kE/nOlXoCIU
 J952p3OhkYTQQcjuUVQeTXvRUOGB7mKok0pDFZNE6c7faqxTCudMABQq/KbMFstU
 eE3cH5FyYj4=
 =GcBb
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "These cleanup patches are mainly move stuff around and should all be
  harmless.  They are mainly split out so that other branches can be
  based on top to avoid conflicts.

  Notable changes are:

   - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no
     longer used (Uwe Kleine-König)
   - The Qualcomm MSM platform is split out into legacy mach-msm and
     new-style mach-qcom, to allow easier maintainance of the new
     hardware support without regressions (Kumar Gala)
   - A rework of some of the Kconfig logic to simplify multiplatform
     support (Rob Herring)
   - Samsung Exynos gets closer to supporting multiplatform (Sachin
     Kamat and others)
   - mach-bcm3528 gets merged into mach-bcm (Stephen Warren)
   - at91 gains some common clock framework support (Alexandre Belloni,
     Jean-Jacques Hiblot and other French people)"

* tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits)
  ARM: hisi: select HAVE_ARM_SCU only for SMP
  ARM: efm32: allow uncompress debug output
  ARM: prima2: build reset code standalone
  ARM: at91: add PWM clock
  ARM: at91: move sam9261 SoC to common clk
  ARM: at91: prepare common clk transition for sam9261 SoC
  ARM: at91: updated the at91_dt_defconfig with support for the ADS7846
  ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek
  ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs
  ARM: at91: dt: Add at91sam9261 dt SoC support
  ARM: at91: switch sam9rl to common clock framework
  ARM: at91/dt: define main clk frequency of at91sam9rlek
  ARM: at91/dt: define at91sam9rl clocks
  ARM: at91: prepare common clk transition for sam9rl SoCs
  ARM: at91: prepare sam9 dt boards transition to common clk
  ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek
  ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs
  ARM: at91: Add at91sam9rl DT SoC support
  ARM: at91: prepare at91sam9rl DT transition
  ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig
  ...
2014-04-05 13:51:19 -07:00
Olof Johansson
eccceebd7e ARM: tegra: core SoC changes for 3.15
A couple of minor fixes, plus the removal of the EMC scaling driver,
 which hasn't been active since we converted clocks to device tree.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTGinRAAoJEMzrak5tbycx0V0QAM2muYdm4Wi/a4vO+1lZ75hS
 SZB82RaXI/NsHh0mEH74ed6I1+fCUTtQt/Ht75X+egaw28O05zso/kjy6X4o3GGr
 BKOUo1KAYZmKk2Obmwoz4Rv6bzNkz32Q34jSOMj/iXVU8QlbxNd1tMG2RKz3KccN
 uHQXNPoPK2od0ZzE5pqdomy2Aqk56l5eKAPIFLOvupLpgOnD4b4EQb3SqEBQG0RZ
 qxvooL0lxmUWyr+Ffre4CP0la+BwHbS+LrNuz5dVcv2jD2MDxbuJiOLzHcJKyp/H
 MChxRadBss0Z5J0xXYQDfZ1K0Sm9Y885RG0/ZGxQQ2v5G24c6Ss1iay/SCcmzNdv
 g7hPWMzH4So5oGQFj0rMZp6Gec1Vbffqr+hGhmgSQjmWx7mnLVO8SrQOWTEE+Vz4
 FwBkFSm1DiGMyygCSO/Sy4ce6e7QgoxFAAakEv1l3uSx6XXCQ/D8tQvQAFGneHh6
 uqu479SFpTCjm+TQqMgwt4FOof39l4m3BjoQAR1/M+EbWaPKQEWxaWqjlLPLl9UC
 RSscgIAWmQ/+dn9pRsBLRS4b0NcKszmUYWk5F9uQEdWRUPkEJPkjrDE7npRVTfRm
 o0mKR4Px/hdeQmT7b3gAN52xilHMNncIwzzj/JaNAQCOb5u03JG2DcDhSALsboHX
 kbT6d5wM3PVroRB9Yqow
 =vOsC
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.15-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc

Merge "ARM: tegra: core SoC changes for 3.15" from Stephen Warren:

A couple of minor fixes, plus the removal of the EMC scaling driver,
which hasn't been active since we converted clocks to device tree.

* tag 'tegra-for-3.15-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Export I/O rail functions
  ARM: tegra: remove tegra EMC scaling driver
  ARM: tegra: don't timeout if CPU is powergated

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-03-20 14:38:53 -07:00
Olof Johansson
5d4089a4ad ARM: tegra: Trusted Foundations work for 3.15
This pull request contains a number of cleanups and enhancements for the
 Trusted Foundations firmware used on production Tegra SoCs. The changes
 allow kernels without TF support to run on HW that uses TF, albeit with
 reduced functionality, and also fix the cpuidle feature.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTGilTAAoJEMzrak5tbycx1sYQAJ+G3LcFyATZ90urnAoEUXHA
 vr6EODBGemPheNQ1vqY15M03nAigwIqfchfPYRZ87f6iE5Q1SueOd70/zEKnHYvg
 3gk9dob0/MjqiwBzLzIMNk3OtSm2t0M4niYAUup2QhwVXjEOQD8hgR5K6scU33Fd
 pG98Bh0RhJbIKjms6X+ZMzIZ/gQrtiCFJynf02FgM7rBtGZOBc9sCXytbybIRHUb
 0781i3AXKPE1aR1PRKab1j6rFcVmnkEPNEAc1gLJzJRPXYgruMMEXbQm7uWgn8dB
 bz19rBnhcnexItv/WslUMzhsJ3IVKBS3h9KSV6pnNB+/0MnUyG0A+O9oBslrlsVj
 v0dRQRe0cSRyXC21CWzWhdK1fZFWCu2MilRVNUm/Nh3UZ8n80wvKJNPe0pBvNQSC
 I0Q7x379G03K2/RngHQQgF43B6vxRvGaOKMHxXrJyBLNrYZ74vSszpvLIr0qxh5Z
 NkKKenrJpLIdn6DCLRTqKDbs4fdQgDbX0lDE3iJqNj27/+OZYiEoY7KpQyeDm/HR
 VxqSsOc1HYqbAtpBEYzMFcqWE77wvOuc/PAK1QHiYplU4oI4eGL9UUdmGIe+NnG8
 TAp1p3cHiMF1hBD7bdgHsRCFdz5GcA/59WGgqljayQvt85ktkc/aCxBxu4PIw4nS
 Z71RAeVrPr5J7ZuP1KPU
 =B/hn
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.15-tf' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc

Merge "ARM: tegra: Trusted Foundations work for 3.15" from Stephen Warren:

This pull request contains a number of cleanups and enhancements for the
Trusted Foundations firmware used on production Tegra SoCs. The changes
allow kernels without TF support to run on HW that uses TF, albeit with
reduced functionality, and also fix the cpuidle feature.

* tag 'tegra-for-3.15-tf' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: cpuidle: use firmware for power down
  ARM: trusted_foundations: implement prepare_idle()
  ARM: firmware: add prepare_idle() operation
  ARM: firmware: enable Trusted Foundations by default
  ARM: trusted_foundations: fallback when TF support is missing
  ARM: trusted_foundations: fix vendor prefix typos

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-03-20 14:35:13 -07:00
Shawn Guo
c1b2a174c3 - Remove common kconfig options required by multi-platform builds out
of individual platforms as they are redundant.
 - Make SMP, CACHE_L2X0 and GPIO config options user visible on
 multi-platform builds as most platforms enable these options and all
 platforms can run with them enabled.
 - Make multi-platform v6 default to more optimal v6k rather than v6
 - Remove the last bit of mach-virt and convert it to just a kconfig
 option.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQEcBAABAgAGBQJTBT1nAAoJEMhvYp4jgsXikI0IAIv2GmBCgbg0XhHZBSheSNOh
 Th1bv4KeEci/3uezwVTAA3AtJIvDNMAQjRYjNSyOnCCC7s5czex1w/Mk/6IzgX8C
 eCauM5kiOV3ZKPMbPI6gxg0bmFe+YzWREbm7fpAqxpc3IXwzYlShnq/kKISq25Qj
 mRZtv97AB2xqAy9zTyy18y+c+F/1mAgd+NeiDbjBimHbTK4urjiD7PpcWvmbYZld
 H9Qw4d9JwVTRpRHw9PRR9glnvFYiFpp+s9ehSjcyYi8wjZKO1+67c56fS+ScsoV7
 qM4J2qtS2kpzvyFvOI7wY6E2M5Es7zOeuJAmh0jEkbDtRa0a4YFYL0DAp5k9Xiw=
 =NEez
 -----END PGP SIGNATURE-----

Merge tag 'kconfig-cleanup-for-3.15' into imx/soc

- Remove common kconfig options required by multi-platform builds out
of individual platforms as they are redundant.
- Make SMP, CACHE_L2X0 and GPIO config options user visible on
multi-platform builds as most platforms enable these options and all
platforms can run with them enabled.
- Make multi-platform v6 default to more optimal v6k rather than v6
- Remove the last bit of mach-virt and convert it to just a kconfig
option.

Conflicts:
	arch/arm/mach-omap2/Kconfig
2014-03-05 10:31:54 +08:00
Thierry Reding
357281ed09 ARM: tegra: Export I/O rail functions
The I/O rail functions can be used by drivers that are buildable as
modules. Exporting the functions makes sure that they're available.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-02-25 13:16:32 -07:00
Stephen Warren
a7cbe92cef ARM: tegra: remove tegra EMC scaling driver
Nothing calls into the Tegra EMC (External Memory Controller) scaling
driver any more, so it's dead code. Remove it.

Cc: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-02-25 10:58:06 -07:00
Greg Kroah-Hartman
3c701651c8 Merge 3.14-rc4 into usb-next
We want the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-24 15:59:22 -08:00
Linus Torvalds
7267342995 ARM: SoC fixes for 3.14-rc
A collection of fixes for ARM platforms. Most are fixes for DTS files,
 mostly from DT conversion on OMAP which is still finding a few issues here
 and there.
 
 There's a couple of small stale code removal patches that we usually
 queue for the next release instead, but they seemed harmless enough to
 bring in now.
 
 Also, a fix for backlight on some PXA platforms, and a cache configuration
 fix for Tegra, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTCgAlAAoJEIwa5zzehBx3J8MP/jFJWHtLHSeSXeKTLEeBV18J
 /M7OG5hKyI38mImPbdJmCHpcTfExTqWuIkvN+6e7QN5PU1V3YSy5XELPh9UIn7zU
 u+Pmt1C4cG8GFEdf03LqaDc4vdtthKUHGUBxQjrA3ZFrR8XZlzAZrnLKU/HA1VF5
 ynaj1cs4Vpf2CGXjM+2ATr5gVhjTs1yldTkG+lHL99JAlSJe7TD3mrANXBRXVVNC
 2yHGEDpDJf8kkBRQZ91xGcVVFw2YWF1avUi3QQ5WltufI+Rtdu8g7ibhakK/nimU
 AfZ3LidjjiTFIGfEi5/2FBim6Tsxpd6wLlchzA6ksPaQ6hk0EVzRPPNzlarmeRO8
 IF5zUPGPXswBeQURXe+OcZIUI4PGS02tshlIUWFPaFM3mZY2djd8Df8Rg20isjOu
 vUYGSL2UY0uLb8NS97scNS9ouGYDp8lV9pHIYlmf6f3Opv6vsw56rWggSsDQDAOk
 wbA2COTtDXxo1tEgbrmevDiaCc8uCDTHKD+uwbxOMCTwLvHHsafRp85BgcCz1z0L
 bOvTbqVhBPW6T47D1ED+ECBo12DbZwA8pth0JSRaf/Fbp6+aMFXp0/d7Hw+ggAxN
 wgEFq/A0M6v+5Y9azo+GLkgqPdH+7twH6eqD8TRgcQdnZXWIuq9UtaNw9Qx4Uusr
 fX9CS2l8ISXgopnRPZCI
 =i7LS
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A collection of fixes for ARM platforms.  Most are fixes for DTS
  files, mostly from DT conversion on OMAP which is still finding a few
  issues here and there.

  There's a couple of small stale code removal patches that we usually
  queue for the next release instead, but they seemed harmless enough to
  bring in now.

  Also, a fix for backlight on some PXA platforms, and a cache
  configuration fix for Tegra, etc"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
  MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer
  ARM: tegra: only run PL310 init on systems with one
  ARM: tegra: Add head numbers to display controllers
  ARM: imx6: build pm-imx6q.c independently of CONFIG_PM
  ARM: tegra: fix RTC0 alias for Cardhu
  ARM: dove: dt: revert PMU interrupt controller node
  Documentation: dt: OMAP: Update Overo/Tobi
  ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi
  ARM: dts: omap3-tobi: Use the correct vendor prefix
  ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo
  ARM: OMAP2+: Remove legacy macros for zoom platforms
  ARM: OMAP2+: Remove MACH_NOKIA_N800
  ARM: dts: N900: add missing compatible property
  ARM: dts: N9/N950: fix boot hang with 3.14-rc1
  ARM: OMAP1: nokia770: enable tahvo-usb
  ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module
  ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module
  ARM: dts: omap3-gta04: Fix mmc1 properties.
  ARM: dts: omap3-gta04: Fix 'aux' gpio key flags.
  ARM: OMAP2+: add missing ARCH_HAS_OPP
  ...
2014-02-23 17:38:04 -08:00
Rob Herring
9352b05b6e ARM: select MIGHT_HAVE_CACHE_L2X0 for V6 and V7 multi-platform
Many V6 and V7 platforms have an L2x0 cache, so make
CONFIG_MIGHT_HAVE_CACHE_L2X0 visible for V6 and V7 multi-platform
builds.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-02-19 16:44:00 -06:00
Rob Herring
90bc8ac77d ARM: select HAVE_SMP for V7 multi-platform
All V7 platforms can run SMP kernels, so make CONFIG_SMP visible for V7
multi-platform builds.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-02-19 16:43:27 -06:00
Rob Herring
ddb902cc34 ARM: centralize common multi-platform kconfig options
Multi-platform requires various kconfig options to be selected, so
platforms don't need to select them individually.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-02-19 16:38:18 -06:00
Stephen Warren
8859685785 ARM: tegra: only run PL310 init on systems with one
Fix tegra_init_cache() to check whether the system has a PL310 cache
before touching the PL310 registers. This prevents access to non-existent
registers on Tegra114 and later.

Note for stable kernels:
In <= v3.12, the file to patch is arch/arm/mach-tegra/common.c.

Cc: <stable@vger.kernel.org> # v3.9+
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2014-02-18 20:30:59 -08:00
Alexandre Courbot
338f2aadca ARM: tegra: cpuidle: use firmware for power down
Attempt to invoke the prepare_idle() and do_idle() firmware calls
to power down a CPU so an underlying firmware gets informed of
the idle operation and performs it by itself if designed in such a way.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-02-18 13:46:50 -07:00
Paul Bolle
f6723b569a usb: host: remove selects of USB_ARCH_HAS_?HCI
USB_ARCH_HAS_EHCI, USB_ARCH_HAS_OHCI, and USB_ARCH_HAS_XHCI were just
removed. Selecting them is a nop. The select statements for these
symbols can be removed too.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-18 12:36:38 -08:00
Stefan Agner
5f80993241 ARM: tegra: don't timeout if CPU is powergated
When booting secondary CPU(s) which are not yet powergated, a wrong
check lead to a timeout after 100 jiffies. With this patch, we only
delay powergating if CPUs are still not powered yet.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-02-12 12:10:58 -07:00
Tejun Heo
1ff6bbfd13 arm, pm, vmpressure: add missing slab.h includes
arch/arm/mach-tegra/pm.c, kernel/power/console.c and mm/vmpressure.c
were somehow getting slab.h indirectly through cgroup.h which in turn
was getting it indirectly through xattr.h.  A scheduled cgroup change
drops xattr.h inclusion from cgroup.h and breaks compilation of these
three files.  Add explicit slab.h includes to the three files.

A pending cgroup patch depends on this change and it'd be great if
this can be routed through cgroup/for-3.14-fixes branch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-tegra@vger.kernel.org
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: linux-pm@vger.kernel.org
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: cgroups@vger.kernel.org
2014-02-03 13:24:01 -05:00
Linus Torvalds
0ba3307a8e ARM: driver updates for 3.14
Updates of SoC-near drivers and other driver updates that makes more sense to
 take through our tree.
 
 The largest part of this is a conversion of device registration for some
 renesas shmobile/sh devices over to use resources. This has required
 coordination with the corresponding arch/sh changes, and we've agreed
 to merge the arch/sh changes through our tree.
 
 Added in this branch is support for Trusted Foundations secure firmware,
 which is what is used on many of the commercial Nvidia Tegra products
 that are in the market, including the Nvidia Shield. The code is local
 to arch/arm at this time since it's uncertain whether it will be shared
 with arm64 longer-term, if needed we will refactor later.
 
 A couple of new RTC drivers used on ARM boards, merged through our tree
 on request by the RTC maintainer.
 
 ... plus a bunch of smaller updates across the board, gpio conversions
 for davinci, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS4ViqAAoJEIwa5zzehBx3m4QP/07VXVE77RFRyly5Bky5AaMY
 zo7ZpoJyg/IT9lxtSAQDhbQq49tKZQVS16oJ7LWXzjAyCY9XrVDX2IkcuqudmYSy
 Xtx+R0jZGK4czqljgjwdHgNCSwugCmO/kgNY3h8ar53dTmGIFiq5boPeMDizRTGD
 g3sgYuQbIqepcHd2jUjJSBXNyvZIlwBJ4wDyZgxRfzyM7unS8T46BpYNJz0esAL+
 0DwIk0nv1eJ6LI0aEL+7bgFaitjUNLpcrroToi1IiIEJuTvZY4AuBjAKt5/181zL
 i1ugimsHahmbwNclAmUimc0rtW4Nn+YHGa8WpYiQ9O7+kPFsYkfLRplHPOjaUBPz
 r76ucgBMGH6i04tvstwlONznO4NhkACWmb4wrfJfRoDTglELLoOd6QGAYKyRublH
 SnrKKmuXzBvtmj2zgUU+S0ka9LdYrjzxoSYprrXQpDr89pUs/AZrlAm9yRjQ3hGw
 0eL9UsDFtYAQwCQtPvin2bjKRgNNDbgdwNYNbA7n8jvE/uZ4rlYr3Ot+oxdfs75e
 K4fY6JwtbZxQVcOU25M3WBYXLl0V61ZISFa16XhYC2hjzgMZ3bfmFUn+TW9C8V4V
 03QqtFyT3FP+VfA3QUS3PuBxALT0HWXmDqp0VJc6UCiXX2InWR+uZQp7a30EawOZ
 WHLqgf+nT3bD3kfagCZN
 =JJlw
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM driver updates from Olof Johansson:
 "Updates of SoC-near drivers and other driver updates that makes more
  sense to take through our tree.

  The largest part of this is a conversion of device registration for
  some renesas shmobile/sh devices over to use resources.  This has
  required coordination with the corresponding arch/sh changes, and
  we've agreed to merge the arch/sh changes through our tree.

  Added in this branch is support for Trusted Foundations secure
  firmware, which is what is used on many of the commercial Nvidia Tegra
  products that are in the market, including the Nvidia Shield.  The
  code is local to arch/arm at this time since it's uncertain whether it
  will be shared with arm64 longer-term, if needed we will refactor
  later.

  A couple of new RTC drivers used on ARM boards, merged through our
  tree on request by the RTC maintainer.

  ... plus a bunch of smaller updates across the board, gpio conversions
  for davinci, etc"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
  watchdog: davinci: rename platform driver to davinci-wdt
  tty: serial: Limit msm_serial_hs driver to platforms that use it
  mmc: msm_sdcc: Limit driver to platforms that use it
  usb: phy: msm: Move mach dependent code to platform data
  clk: versatile: fixup IM-PD1 clock implementation
  clk: versatile: pass a name to ICST clock provider
  ARM: integrator: pass parent IRQ to the SIC
  irqchip: versatile FPGA: support cascaded interrupts from DT
  gpio: davinci: don't create irq_domain in case of unbanked irqs
  gpio: davinci: use chained_irq_enter/chained_irq_exit API
  gpio: davinci: add OF support
  gpio: davinci: remove unused variable intc_irq_num
  gpio: davinci: convert to use irqdomain support.
  gpio: introduce GPIO_DAVINCI kconfig option
  gpio: davinci: get rid of DAVINCI_N_GPIO
  gpio: davinci: use {readl|writel}_relaxed() instead of __raw_*
  serial: sh-sci: Add OF support
  serial: sh-sci: Add device tree bindings documentation
  serial: sh-sci: Remove platform data mapbase and irqs fields
  serial: sh-sci: Remove platform data scbrr_algo_id field
  ...
2014-01-23 18:49:36 -08:00
Linus Torvalds
dfd10e7ae6 ARM: SoC platform changes for 3.14
New core SoC-specific changes.
 
 New platforms:
 * Introduction of a vendor, Hisilicon, and one of their SoCs with some
   random numerical product name.
 * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m, i.e. !MMU).
 * Marvell Berlin series of SoCs, which include the one in Chromecast.
 * MOXA platform support, ARM9-based platform used mostly in industrial products
 * Support for Freescale's i.MX50 SoC.
 
 Other work:
 * Renesas work for new platforms and drivers, and conversion over to
   more multiplatform-friendly device registration schemes.
 * SMP support for Allwinner sunxi platforms.
 * ... plus a bunch of other stuff across various platforms.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS4VggAAoJEIwa5zzehBx3YkEP/j/Vp83zPcPijb8CNLUGJ9rK
 RTOW9hlLbwCGAcIi/32XVjup1ylTzQuwKpH2R6Sf2GRcmXI1HbCCyDSGKWq+eK9C
 vDRoWiU9DVRmXuaC7R1dscLS1qSobVoI80bOstblZW65799z48IllD7rJA1BzDIg
 vUy4knY9hO39DK7sJymXTBJepWxXJHMaYmr15xuxbaR3Qsp8zisqyzMwLqVfBwFB
 FyPr2PfxU8HJOoWhIsVo+679pmb9tHD6our0HG/lHSuPcRO/3UwN+VD87SwfpjNx
 P7qiRFkIoMooiTRmjwPPNbMZBJHl6vBR1RWHmws5s9aay1DDhdvQURxKx4bNaN/A
 UzwiestopISLChd9jqjxTbngl1mvLaL9JwBjRVAkXG4vJJFrhwqvmcMrlszA3ueR
 2Th/NBk0b2s8ncAuT7bFe4i/H7es8aI/D2weF3FxRGgpan/B0T0UDAKO+rrMYZ0q
 1ZoqlgMQZ0o1l7B5v90h0QQo/GMmin1xzyAChmsl8xbOHh5YfWVFGwLzVbYeZ/YJ
 yf3CcgQjAA8UV3f1J3nZeqM84o8qqtKUmUjsqWIgT2DnxOoM3pGckrmQ4OvhLccd
 etROW2nr8EqmoL7shheeHPANoDsTT1XSs0xbWo4ZBpGW5rTIFVoLEGyqa48tw5qA
 pkH1KwpwEXTrw6MXP5L1
 =pgLW
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "New core SoC-specific changes.

  New platforms:
   * Introduction of a vendor, Hisilicon, and one of their SoCs with
     some random numerical product name.
   * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m,
     i.e. !MMU).
   * Marvell Berlin series of SoCs, which include the one in Chromecast.
   * MOXA platform support, ARM9-based platform used mostly in
     industrial products
   * Support for Freescale's i.MX50 SoC.

  Other work:
   * Renesas work for new platforms and drivers, and conversion over to
     more multiplatform-friendly device registration schemes.
   * SMP support for Allwinner sunxi platforms.
   * ... plus a bunch of other stuff across various platforms"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (201 commits)
  ARM: tegra: fix tegra_powergate_sequence_power_up() inline
  ARM: msm_defconfig: Update for multi-platform
  ARM: msm: Move MSM's DT based hardware to multi-platform support
  ARM: msm: Only build timer.c if required
  ARM: msm: Only build clock.c on proc_comm based platforms
  ARM: ux500: Enable system suspend with WFI support
  ARM: ux500: turn on PRINTK_TIME in u8500_defconfig
  ARM: shmobile: r8a7790: Fix I2C controller names
  ARM: msm: Simplify ARCH_MSM_DT config
  ARM: msm: Add support for MSM8974 SoC
  ARM: sunxi: select ARM_PSCI
  MAINTAINERS: Update Allwinner sunXi maintainer files
  ARM: sunxi: Select RESET_CONTROLLER
  ARM: imx: improve the comment of CCM lpm SW workaround
  ARM: imx: improve status check of clock gate
  ARM: imx: add necessary interface for pfd
  ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100
  ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support
  ARM: imx: Add cpu frequency scaling support
  ARM i.MX35: Add devicetree support.
  ...
2014-01-23 18:40:49 -08:00
Linus Torvalds
f2c73464d7 ARM: SoC cleanups for 3.14
This is the branch where we usually queue up cleanup efforts, moving
 drivers out of the architecture directory, header file restructuring,
 etc. Sometimes they tangle with new development so it's hard to keep it
 strictly to cleanups.
 
 Some of the things included in this branch are:
 
 * Atmel SAMA5 conversion to common clock
 * Reset framework conversion for tegra platforms
  - Some of this depends on tegra clock driver reworks that are shared with Mike
    Turquette's clk tree.
 * Tegra DMA refactoring, which are shared branches with the DMA tree.
 * Removal of some header files on exynos to prepare for multiplatform
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS4Vf7AAoJEIwa5zzehBx3f9UP/jwMlbfbSZHfNQ/QG0SqZ9RD
 zvddyDMHY/qXnzgF3Dax+JR9BDDVy8AlQe713FCoiHJZggWRAbbavkx8gxITDrZQ
 6NYaEkkuVxqyM8APl3PwMqYm8UZ8MUf4lCltlOA4jkesY9vue91AFnfyKh2CvHrn
 Leg4XT6mFzf/vYDL6RbvTz/Qr253uv3KvYBxkeiRNa0Y7OXRemEXSOfgxh0YGxUl
 LZ2IWQFOh/DH4kaeQI8V4G67X3ceHiFyhCnl0CPwfxaZaNBVaxvIFgIUTdetS6Sb
 zcXa029tE/Dfsr55vZAv9LUHEipCSOeE5rn2EJWehTWyM7vJ42Eozqgh+zfCjXS7
 Ib6g2npsvIluQit/RdITu44h5yZlrQsLgKTGJ8jjXqbT4HQ/746W8b/TP0YLtbw7
 N8oqr7k4vsZyF0dAYZQtfQUZeGISz67UbFcdzl9tmYOR7HFuAYkAQYst77zkVJf8
 om59BAYYTG5FNjQ4I9AKUfJzxXYveI6AKpXSCCZiahpFM2D1CJIzp9Wi0GwK1HRR
 sFVWhS0dajvz63pVVC2tw5Sq4J7onRRNGIXFPoE5fkmlelm0/q0zzGjw3Z0nTqbZ
 8zxuwuy2FfPJK11GbUAIhAgn1sCLYyAhl6IE+FsanGeMOSGIMrH0v5/HphAxoCXt
 BvqMDogyLoGPce1Gm3pJ
 =3CcT
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This is the branch where we usually queue up cleanup efforts, moving
  drivers out of the architecture directory, header file restructuring,
  etc.  Sometimes they tangle with new development so it's hard to keep
  it strictly to cleanups.

  Some of the things included in this branch are:

   * Atmel SAMA5 conversion to common clock
   * Reset framework conversion for tegra platforms
    - Some of this depends on tegra clock driver reworks that are shared
      with Mike Turquette's clk tree.
   * Tegra DMA refactoring, which are shared branches with the DMA tree.
   * Removal of some header files on exynos to prepare for
     multiplatform"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits)
  ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h
  ARM: mvebu: remove prototypes of non-existing functions from common.h
  ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h
  serial: sh-sci: Rework baud rate calculation
  serial: sh-sci: Compute overrun_bit without using baud rate algo
  serial: sh-sci: Remove unused GPIO request code
  serial: sh-sci: Move overrun_bit and error_mask fields out of pdata
  serial: sh-sci: Support resources passed through platform resources
  serial: sh-sci: Don't check IRQ in verify port operation
  serial: sh-sci: Set the UPF_FIXED_PORT flag
  serial: sh-sci: Remove duplicate interrupt check in verify port op
  serial: sh-sci: Simplify baud rate calculation algorithms
  serial: sh-sci: Remove baud rate calculation algorithm 5
  serial: sh-sci: Sort headers alphabetically
  ARM: EXYNOS: Kill exynos_pm_late_initcall()
  ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4
  ARM: at91: switch Calao QIL-A9260 board to DT
  clk: at91: fix pmc_clk_ids data type attriubte
  PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h>
  ARM: EXYNOS: remove <mach/regs-clock.h> for exynos
  ...
2014-01-23 18:36:55 -08:00
Linus Torvalds
8e50966072 GPIO tree bulk changes for v3.14
A big set this merge window, as we have much going on in
 this subsystem. Major changes this time:
 
 - Some core improvements and cleanups to the new GPIO
   descriptor API. This seems to be working now so we can
   start the exodus to this API, moving gradually away from
   the global GPIO numberspace.
 
 - Incremental improvements to the ACPI GPIO core, and move
   the few GPIO ACPI clients we have to the GPIO descriptor
   API right *now* before we go any further. We actually
   managed to contain this *before* we started to litter
   the kernel with yet another hackish global numberspace for
   the ACPI GPIOs, which is a big win.
 
 - The RFkill GPIO driver and all platforms using it have
   been migrated to use the GPIO descriptors rather than
   fixed number assignments. Tegra machine has been migrated
   as part of this.
 
 - New drivers for MOXA ART, Xtensa GPIO32 and SMSC SCH311x.
   Those should be really good examples of how I expect a
   nice GPIO driver to look these days.
 
 - Do away with custom GPIO implementations on a major
   part of the ARM machines: ks8695, lpc32xx, mv78xx0.
   Make a first step towards the same in the horribly
   convoluted Samsung S3C include forest. We expect to
   continue to clean this up as we move forward.
 
 - Flag GPIO lines used for IRQ on adnp, bcm-kona, em,
   intel-mid and lynxpoint.
   This makes the GPIOlib core aware that a certain GPIO line
   is used for IRQs and can then enforce some semantics such
   as disallowing a GPIO line marked as in use for IRQ to be
   switched to output mode.
 
 - Drop all use of irq_set_chip_and_handler_name().
   The name provided in these cases were just unhelpful
   tags like "mux" or "demux".
 
 - Extend the MCP23s08 driver to handle interrupts.
 
 - Minor incremental improvements for rcar, lynxpoint, em
   74x164 and msm drivers.
 
 - Some non-urgent bug fixes here and there, duplicate
   #includes and that usual kind of cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJS3i/MAAoJEEEQszewGV1zVB8P/Rjzgx8To0gQPn49M4u/A1Mk
 mAzpUoKa05ILTKBm/bpWPYZPpg9PDqUxOYPsIDEAkc70BKMPTXxrYiE+LSfIzwaJ
 a8IRwOzNL7Iwc+zPNS/GrmRJyxymb4lmMD/fypk/YaumZ6j4Hbo+9R8Zct9gbZ5Q
 ZbKtz6kLhbkbNCc71bVMgk6yacSBx1ak8Xpd12HlW85NgOCoBj7/DI1Lb61x1ImY
 NYpSpmtfGGTkQLtBl5dTLefZOvL1dKSct9TMOsA2jzNqf3zA1YA6XOxPGHK/qtjq
 3s9cN1sIVF/g7sm1+qoKXe0OTQrXHT7SX8BH9/tb3MiKO8ItactlQUJlYNR3WFSN
 zm1PNe5zWr+GWzV0iUrqoMN4XX8nThiFDOxZpOwBTZcUD6qtDFIZp41M3qxwFTbJ
 hCtSQ8gUO1Ce+xtOQYYOwEkRS7FZa1Z+p/lendTFuGDh6DcXy97SrKkTktM4Q98B
 LhqrwUzCdES0ecNDi2+P5y4Fc7M0cMMn9SnFvbSBObLB89TF9uzMIn8jUBCZMvrM
 eAeZlRBYk8F+6F12higaWqZyiBKIEubXo/Z8T0L2KEDm/z/ddJvhQgBKvWlf3rqi
 RToD446rda+RhFBnxLZ3mTui5nZ2WyKTOqhVqeBuriJhE/cTUaQHUBUrbOwx20kE
 Xb9mQ2n3GRk2157n1CLY
 =lW2i
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO tree bulk changes from Linus Walleij:
 "A big set this merge window, as we have much going on in this
  subsystem.  The changes to other subsystems (notably a slew of ARM
  machines as I am doing away with their custom APIs) have all been
  ACKed to the extent possible.

  Major changes this time:

   - Some core improvements and cleanups to the new GPIO descriptor API.
     This seems to be working now so we can start the exodus to this
     API, moving gradually away from the global GPIO numberspace.

   - Incremental improvements to the ACPI GPIO core, and move the few
     GPIO ACPI clients we have to the GPIO descriptor API right *now*
     before we go any further.  We actually managed to contain this
     *before* we started to litter the kernel with yet another hackish
     global numberspace for the ACPI GPIOs, which is a big win.

   - The RFkill GPIO driver and all platforms using it have been
     migrated to use the GPIO descriptors rather than fixed number
     assignments.  Tegra machine has been migrated as part of this.

   - New drivers for MOXA ART, Xtensa GPIO32 and SMSC SCH311x.  Those
     should be really good examples of how I expect a nice GPIO driver
     to look these days.

   - Do away with custom GPIO implementations on a major part of the ARM
     machines: ks8695, lpc32xx, mv78xx0.  Make a first step towards the
     same in the horribly convoluted Samsung S3C include forest.  We
     expect to continue to clean this up as we move forward.

   - Flag GPIO lines used for IRQ on adnp, bcm-kona, em, intel-mid and
     lynxpoint.

     This makes the GPIOlib core aware that a certain GPIO line is used
     for IRQs and can then enforce some semantics such as disallowing a
     GPIO line marked as in use for IRQ to be switched to output mode.

   - Drop all use of irq_set_chip_and_handler_name().  The name provided
     in these cases were just unhelpful tags like "mux" or "demux".

   - Extend the MCP23s08 driver to handle interrupts.

   - Minor incremental improvements for rcar, lynxpoint, em 74x164 and
     msm drivers.

   - Some non-urgent bug fixes here and there, duplicate #includes and
     that usual kind of cleanups"

Fix up broken Kconfig file manually to make this all compile.

* tag 'gpio-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (71 commits)
  gpio: mcp23s08: fix casting caused build warning
  gpio: mcp23s08: depend on OF_GPIO
  gpio: mcp23s08: Add irq functionality for i2c chips
  ARM: S5P[v210|c100|64x0]: Fix build error
  gpio: pxa: clamp gpio get value to [0,1]
  ARM: s3c24xx: explicit dependency on <plat/gpio-cfg.h>
  ARM: S3C[24|64]xx: move includes back under <mach/> scope
  Documentation / ACPI: update to GPIO descriptor API
  gpio / ACPI: get rid of acpi_gpio.h
  gpio / ACPI: register to ACPI events automatically
  mmc: sdhci-acpi: convert to use GPIO descriptor API
  ARM: s3c24xx: fix build error
  gpio: f7188x: set can_sleep attribute
  gpio: samsung: Update documentation
  gpio: samsung: Remove hardware.h inclusion
  gpio: xtensa: depend on HAVE_XTENSA_GPIO32
  gpio: clps711x: Enable driver compilation with COMPILE_TEST
  gpio: clps711x: Use of_match_ptr()
  net: rfkill: gpio: convert to descriptor-based GPIO interface
  leds: s3c24xx: Fix build failure
  ...
2014-01-21 10:09:12 -08:00
Olof Johansson
a7dedb4fea DaVinci GPIO driver updates
---------------------------
 
 This pull request contains updates
 to DaVinci GPIO driver and the
 resultant platform code changes. The
 updates include DT-conversion and
 changes to make the driver cross-platform
 ready.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJSuycQAAoJEGFBu2jqvgRNIdMP/jE7LW16dF2dGq79Gy26GWcM
 dNSSXzwEm2q5vT49H8ADzkbnsI2PlFpcH0mwn5BpPuVRl+RKHfNEZxwuAthqKduu
 BIKVGBkNECrliIIUecCwBjAYpQknynvLAGHRhYmibEnZCH45kZ8g7DLJMeBL4Huz
 smDkz2yWWoHjnIaCk/kIbQfeETKSx5GP+OwnnrU/4HPpndxqZ6KU/MXb8ZeMiLfa
 piMl10o/YIJcfZcKBbkI1I2PuHNgNAzjVnMMsCVF+B5vgLiYmj9P+6l1Sfau6y8A
 kimW34q4HNuQ07hkDAIALz0AH7y8bL9SoKprT4NX10DvGHwl21a/Ji5QS8N49krM
 +HAiSIUdsFwie5M8286owGAJ/TBFReStWY1a/sIghx9idU6ejuM/Pj8/bfTS+Vu+
 8wyos8hTYVBDOEwoRzw48S5x93U5W6dsjOacOJ+blHBtPmADlWSNG8HwzSfWxHEI
 PMaVhu2EKtgD1ZFgU5Zlt+f5h3E4ezAIEpiPIhdLcg/3hqNSpFRmNV3nJsx+KwE+
 JyZXcHkyq42i6wL5Sdf6W/Dpd5knPyqP3BBWBTeg+BDLnH8F2+Vtws95I4dlit0T
 RtQ9Ms6QmznPTs9fMaviURiVIUBK6XIG5UHDU10bhL0h8vOR/hXAVrAB+wZntvPU
 uIXAapK/78LTBX92opDz
 =DxLt
 -----END PGP SIGNATURE-----

Merge tag 'davinci-for-v3.14/gpio' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/drivers

From Sekhar Nori:
DaVinci GPIO driver updates
---------------------------

This pull request contains updates to DaVinci GPIO driver and the
resultant platform code changes. The updates include DT-conversion and
changes to make the driver cross-platform ready.

* tag 'davinci-for-v3.14/gpio' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  gpio: davinci: don't create irq_domain in case of unbanked irqs
  gpio: davinci: use chained_irq_enter/chained_irq_exit API
  gpio: davinci: add OF support
  gpio: davinci: remove unused variable intc_irq_num
  gpio: davinci: convert to use irqdomain support.
  gpio: introduce GPIO_DAVINCI kconfig option
  gpio: davinci: get rid of DAVINCI_N_GPIO
  gpio: davinci: use {readl|writel}_relaxed() instead of __raw_*

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02 11:45:27 -08:00
Olof Johansson
d578759ed8 ARM: tegra: SoC-specific core code changes
This branch contains various miscellaneous changes to code in the
 mach-tegra/ directory. It is baased on v3.13-rc1, and shouldn't conflict
 with anything else.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSr3IGAAoJEMzrak5tbycxVVUP/09VfeFYOidIm6mgbWSMlL4l
 DEPzrGBOvyO60og4LIbDIgwDzkcEsxIF9erlrVTz1Fvh2p0P0sQycIKjvyhvNXeh
 Ft9TQ1kDHjoJcfHI9f8tapkmwhOG+6vy2gDrTPmyxjnLpiE5ccM18CCr5CMK+y2v
 Ojzmf2paPBFyI84gcdWuwF4Ze2YmwdHmG7TksG/PZrpicizSxe+d9wNVDBMkJnP6
 QFicMU6DEFZVwwDkFx4qPYrFDJPk8dqcAmNl+F+9jGEqTmxA+7M8eOF/SQa62lwa
 OJrVugD8YigT5NjRW/9btOVY/jUHbg0Ekj5DXd7Q9rO5KNUrFDRSia5XiWmms/S8
 QNJezmjNgA83OQDefuAkpsKydf1XGoyIQ9EjDUb4i807PRwTO4En+1pD0EpEWSet
 0c1mfDvU5uC6L9A5VvR0pzyGz2U2EhNhkUz03WAqtWYdrR68vIZHNZVIvHOLuwWF
 fDkS26KxziOmKM1ePdL7wemuNOod8ACeyzXMa2dhR68l6LH1X1pnMaoxvk2AjETk
 SMat9tsxY827+TtQlAQ+4bdR3qXqYsQLD7VWOPO0V3fs5T08jVZrpJ9pHDRYW88K
 dGHmIW4sHXKXP4Qw9rDGWSkWZeOVJYr72U6uH9vbg8hK6Wi2eAMxZ27ngFiqahSK
 PIhnAfsdM2/FX+C+vu58
 =Oztt
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.14-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc

From Stephen Warren:
ARM: tegra: SoC-specific core code changes

This branch contains various miscellaneous changes to code in the
mach-tegra/ directory. It is baased on v3.13-rc1, and shouldn't conflict
with anything else.

* tag 'tegra-for-3.14-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: select PINCTRL_TEGRA124 for Tegra124 SoC
  ARM: tegra: use section-sized static mappings for LPAE too
  ARM: tegra: don't hard-code DEBUG_LL baud rate
  ARM: tegra: fix DEBUG_LL combined with LPAE
  ARM: tegra: switch FUSE clock on before usage

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-26 11:02:25 -08:00
Olof Johansson
51b052b0d3 ARM: tegra: Trusted Foundations firmware support
Add support for the Trusted Foundations secure-mode firmware, as found
 on NVIDIA SHIELD. This allows Linux to run in non-secure mode on this
 board; all previous Tegra support has assumed the kernel is running in
 secure mode.
 
 This branch is based on v3.13-rc1, and shouldn't cause any merge
 conflicts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSr3NgAAoJEMzrak5tbycxRXkP/imK6IQn5cAtXY7nfKnn4Rke
 RjvERwURDpi6QDrXaRe6NUVg3PgZ0Z7kXLqSuj/cAPinMyhQDR5DxlJVjYiduJ50
 CmMhV+RWkA/cmaU2oPjpD3YEm68txYXTyf3iWfX1ScFSuNNN0yGel3eY2rFjX/aT
 RgAWm8HbQTR7NDazAAt9gOqeJUtfs3msXwMxtZvD6OhRougyaPlqfuafjVpfM9vK
 JLDAbJuMEl6/dI2UYVvDBJvL//TOOjnwy6YFwQCZsqhYGHhT3Xc9hQABilUQmJ1d
 mbu29cPBrRgGiu3anpjZeh0KxVB3xDPp1a+o4lSH0iJztAPy4WTUZ1Sc3y2qwKaS
 qZ5Zu5SXVI1O/ywv1FChL2syuJbgOH+HGBMFslacVniQ/U1o4PmKZCJOB0pnpf8B
 dESAQgvDqIZeyt2eXxsAMAOw01xMTotngAaJpAtYFv0plP+PxAhr+dkHHjCwwkde
 7+OKeVE5TDDwlhz5PE35/4EWdWM0622aL3sK1IxrR2q66LGpKAoQpFeKaAUr0d6z
 OQnQiS+uNSNrCvAEeyEL2bQfv1xsjOFpFy6PV7ShrUrAgPVR3+wj82RvwTciMdbd
 tv3Y7LXCugSUOdq/abc3VgAnlgMzlhH5vlj6CMcKSSPbzZ3lbRB37iBmxpJLm9qa
 o3Ah/MaWSqtqmIueFrpa
 =c5t/
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.14-trusted-foundations' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

From Stephen Warren:
ARM: tegra: Trusted Foundations firmware support

Add support for the Trusted Foundations secure-mode firmware, as found
on NVIDIA SHIELD. This allows Linux to run in non-secure mode on this
board; all previous Tegra support has assumed the kernel is running in
secure mode.

(The base TF support has been discussed back and forth a lot; for now
the most logical place for it seems to be under arch/arm, so we're adding
it here. We can move it out to a common location in the future if needed).

* tag 'tegra-for-3.14-trusted-foundations' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: support Trusted Foundations by default
  ARM: tegra: set CPU reset handler using firmware
  ARM: tegra: split setting of CPU reset handler
  ARM: tegra: add support for Trusted Foundations
  of: add Trusted Foundations bindings documentation
  of: add vendor prefix for Trusted Logic Mobility
  ARM: add basic support for Trusted Foundations

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-26 11:01:11 -08:00
Olof Johansson
92fa35e930 ARM: tegra: powergate driver changes
This branch includes all the changes to Tegra's powergate driver for 3.14.
 These are separate out, since the Tegra DRM changes for 3.14 rely on the
 new APIs introduced here.
 
 A few cleanups and fixes are included, plus additions of Tegra124 SoC
 support, and a new API for manipulating Tegra's IO rail deep power down
 states.
 
 This branch is based on tag tegra-for-3.14-dmas-resets-rework, in order
 to avoid conflicts with the addition of common reset controller support
 to the powergate driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSr3G5AAoJEMzrak5tbycxHaEP/2YP1KIUTINzF9JlTaFWLd38
 dlqCOdDjcIow6QvaI0H2xdD7OhWqbiK2gAKz10PH0TYVr5AJZKyC7uxAw1gvV5bI
 2hgP9ZBVQY8qfveZuyQhL9jCwAg52TfG2LBO4Iw3wng9tO00uo8knjoHURmiewuY
 fLY8CQxYydwK8MmqabPI/L0gQhSlswyDByaeB0ixHJncSVT8KHmbSX8kx7FnYsI6
 /r/D7IQtMyx52XJRbInN83UIdONKP9vkPAXmptKBU2SGwdXOzqPqfxFuNRKN85Gq
 a4wlJUQAfBAndiemaZIH5O7gmmUht1lB0L9JWDFw9nBr6EHDVOpgRgi/OgVFaFE+
 Qer3LdrpEvyXsRe3AjeQgta8716KaRMW3IbaqkdS0F+HwyFGL9/nGRttu9JLHSCR
 oo7FVscaE7tC2d/LGNqI0y4pprgbrjROT70hWoNDF8oS5qDsI3rxEjB0FXyzE2by
 Bd702Sc9heh60Hnov/vZy9WFcWETEKVEF5hgIL3lrjA6pMKdH7fEylOD+bxVAmE2
 t5wePXc7OSdciaLN/D1GhtCD+R58u+idHadKnU9uRYB1wmeIAeJMi9D/ZnpKftX4
 M5Ts7t8k1jxZlRXXgiara3SwJ6tIOlc5vEvhQWEeInzL0yishFDy2mmq1lMaV0mJ
 cFgQUdhufycI0Yprfwjt
 =jJOV
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.14-powergate' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc

From Stephen Warren:
ARM: tegra: powergate driver changes

This branch includes all the changes to Tegra's powergate driver for 3.14.
These are separate out, since the Tegra DRM changes for 3.14 rely on the
new APIs introduced here.

A few cleanups and fixes are included, plus additions of Tegra124 SoC
support, and a new API for manipulating Tegra's IO rail deep power down
states.

This branch is based on tag tegra-for-3.14-dmas-resets-rework, in order
to avoid conflicts with the addition of common reset controller support
to the powergate driver.

* tag 'tegra-for-3.14-powergate' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Add IO rail support
  ARM: tegra: Special-case the 3D clamps on Tegra124
  ARM: tegra: Add Tegra124 powergate support
  ARM: tegra: Export tegra_powergate_remove_clamping()
  ARM: tegra: Export tegra_powergate_power_off()
  ARM: tegra: Rename cpu0 powergate to crail
  ARM: tegra: Fix some whitespace oddities

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-26 10:57:50 -08:00
Olof Johansson
34edea7adc Merge branch 'tegra/dma-reset-rework' into next/soc
Bringing in the tegra dma/reset rework as a base for new SoC branches.

* tegra/dma-reset-rework: (81 commits)
  spi: tegra: checking for ERR_PTR instead of NULL
  ASoC: tegra: update module reset list for Tegra124
  clk: tegra: remove bogus PCIE_XCLK
  clk: tegra: remove legacy reset APIs
  ARM: tegra: remove legacy DMA entries from DT
  ARM: tegra: remove legacy clock entries from DT
  USB: EHCI: tegra: use reset framework
  Input: tegra-kbc - use reset framework
  serial: tegra: convert to standard DMA DT bindings
  serial: tegra: use reset framework
  spi: tegra: convert to standard DMA DT bindings
  spi: tegra: use reset framework
  staging: nvec: use reset framework
  i2c: tegra: use reset framework
  ASoC: tegra: convert to standard DMA DT bindings
  ASoC: tegra: allocate AHUB FIFO during probe() not startup()
  ASoC: tegra: call pm_runtime APIs around register accesses
  ASoC: tegra: use reset framework
  dma: tegra: register as an OF DMA controller
  dma: tegra: use reset framework
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-26 10:57:30 -08:00
Olof Johansson
e7d248f0e0 ARM: tegra: implement common DMA and resets DT bindings
This series converts the Tegra DTs and drivers to use the common/
 standard DMA and reset bindings, rather than custom bindings. It also
 adds complete documentation for the Tegra clock bindings without
 actually changing any binding definitions.
 
 This conversion relies on a few sets of patches in branches from outside
 the Tegra tree:
 
 1) A patch to add an DMA channel request API which allows deferred probe
    to be implemented.
 
 2) A patch to implement a common part of the of_xlate function for DMA
    controllers.
 
 3) Some ASoC patches (which in turn rely on (1) above), which support
    deferred probe during DMA channel allocation.
 
 4) The Tegra clock driver changes for 3.14.
 
 Consequently, this branch is based on a merge of all of those external
 branches.
 
 In turn, this branch is or will be pulled into a few places that either
 rely on features introduced here, or would otherwise conflict with the
 patches:
 
 a) Tegra's own for-3.14/powergate and for-4.14/dt branches, to avoid
    conflicts.
 
 b) The DRM tree, which introduces new code that relies on the reset
    controller framework introduced in this branch, and to avoid
    conflicts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSr3AnAAoJEMzrak5tbycxfMwQAMeffTFreJqDiQ4Vj0XmuhSn
 RFlXiZQsWtQ6gGgNfKyDsXzDMaz1KDAabcUYRcZwrluxuSCPBcK1JirCj5R8uRY7
 LDZFX92CO8zRgiij0mhgokV4zzuEQ56q1uhPxqI3o+wG3v44jlMSMgFHQJUevdET
 aKr2Pss8Hb00XDztnpxprs6FUoU/W99NRH0i/5znbBwuHqYFP37zlKe2MRwbqDwR
 AMgkrnGoawe85Stz4p/iR9pCLpAMa0dH94V4JrAP4+IQrl0DEKWbrolpQHii4gzh
 NCGazMELTqkaZaorC/n1SmczH1kTj4vcjbbmeB8dwS8Vqhr+uf7W1oLlJ46TUOsp
 ESO0uD2GfpHKQQwLxEfgjfmwsIUMbdWHef8f2HUuvl6Js+LCpaPkxd52Pt/qL4sU
 0sKqTbldRZXzGhvwa0/MK32WhmH4v31s7IZAg5A2YxqDR6yWryl7legWyvrI96C0
 OlmVe1C/2NGk0QCfK0G/xTa9V7YzMfj8k4ICSZOgUoF4BeGGj6d3svWvLbKbbrU1
 0fVvR7aCm78pRXixI6kURpj9D0mEfqus9Hx7VoWcL0TS4QH2dSYlGI+jDCiliQmj
 +kWrZWHsASSvPmUZk4RBNaviCbnGU8/t5nNdJSdFIUM/PIswzZ4GaAu6gdVksIY8
 hcx410PyAzTZL2lENamE
 =8T7+
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.14-dmas-resets-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/cleanup

From Stephen Warren:
ARM: tegra: implement common DMA and resets DT bindings

This series converts the Tegra DTs and drivers to use the common/
standard DMA and reset bindings, rather than custom bindings. It also
adds complete documentation for the Tegra clock bindings without
actually changing any binding definitions.

This conversion relies on a few sets of patches in branches from outside
the Tegra tree:

1) A patch to add an DMA channel request API which allows deferred probe
   to be implemented.

2) A patch to implement a common part of the of_xlate function for DMA
   controllers.

3) Some ASoC patches (which in turn rely on (1) above), which support
   deferred probe during DMA channel allocation.

4) The Tegra clock driver changes for 3.14.

Consequently, this branch is based on a merge of all of those external
branches.

In turn, this branch is or will be pulled into a few places that either
rely on features introduced here, or would otherwise conflict with the
patches:

a) Tegra's own for-3.14/powergate and for-4.14/dt branches, to avoid
   conflicts.

b) The DRM tree, which introduces new code that relies on the reset
   controller framework introduced in this branch, and to avoid
   conflicts.

* tag 'tegra-for-3.14-dmas-resets-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (30 commits)
  spi: tegra: checking for ERR_PTR instead of NULL
  ASoC: tegra: update module reset list for Tegra124
  clk: tegra: remove bogus PCIE_XCLK
  clk: tegra: remove legacy reset APIs
  ARM: tegra: remove legacy DMA entries from DT
  ARM: tegra: remove legacy clock entries from DT
  USB: EHCI: tegra: use reset framework
  Input: tegra-kbc - use reset framework
  serial: tegra: convert to standard DMA DT bindings
  serial: tegra: use reset framework
  spi: tegra: convert to standard DMA DT bindings
  spi: tegra: use reset framework
  staging: nvec: use reset framework
  i2c: tegra: use reset framework
  ASoC: tegra: convert to standard DMA DT bindings
  ASoC: tegra: allocate AHUB FIFO during probe() not startup()
  ASoC: tegra: call pm_runtime APIs around register accesses
  ASoC: tegra: use reset framework
  dma: tegra: register as an OF DMA controller
  dma: tegra: use reset framework
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-26 10:33:05 -08:00
Thierry Reding
9d4450ae87 ARM: tegra: Add IO rail support
Add tegra_io_rail_power_off() and tegra_io_rail_power_on() functions to
put IO rails into or out of deep powerdown mode, respectively.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-16 14:03:09 -07:00
Thierry Reding
c537376cbb ARM: tegra: Special-case the 3D clamps on Tegra124
A separate register is used to remove the clamps for the GPU on
Tegra124. In order to be able to use the same API, special-case
this particular partition.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-16 14:02:51 -07:00
Thierry Reding
9a71657966 ARM: tegra: Add Tegra124 powergate support
Three new gates have been added for Tegra124: SOR, VIC and IRAM. In
addition, PCIe and SATA gates are again supported, like on Tegra20 and
Tegra30.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-16 14:02:51 -07:00
Thierry Reding
201fc0f916 ARM: tegra: Export tegra_powergate_remove_clamping()
Drivers can use the tegra_powergate_remove_clamping() API during
initialization. In order to allow such drivers to be built as modules,
export the symbol.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-16 14:02:51 -07:00
Thierry Reding
44374afee8 ARM: tegra: Export tegra_powergate_power_off()
This function can be used by drivers, which in turn may be built as
modules. Export the symbol so it is available to modules.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-16 14:02:50 -07:00
Thierry Reding
ccab7983bd ARM: tegra: Rename cpu0 powergate to crail
This matches the name of the powergate as listed in the TRM.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-16 14:02:50 -07:00
Thierry Reding
7e25eb01e6 ARM: tegra: Fix some whitespace oddities
Some of the powergate code uses unusual spacing around == and has a tab
instead of a space before an opening parenthesis.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-16 14:02:50 -07:00
Alexandre Courbot
265c89c994 ARM: tegra: set CPU reset handler using firmware
Use a firmware operation to set the CPU reset handler and only resort to
doing it ourselves if there is none defined.

This supports the booting of secondary CPUs on devices using a TrustZone
secure monitor.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-13 12:50:31 -07:00
Alexandre Courbot
ad14ecee4d ARM: tegra: split setting of CPU reset handler
Not all Tegra devices can set the CPU reset handler in the same way.
In particular, devices using a TrustZone secure monitor cannot set it
up directly and need to ask the firmware to do it.

This patch separates the act of setting the reset handler from its
preparation, so the former can be implemented in a different way.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-13 12:50:31 -07:00
Alexandre Courbot
1a5de3aeb0 ARM: tegra: add support for Trusted Foundations
Register the firmware operations for Trusted Foundations if the device
tree indicates it is active on the device.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-13 12:50:31 -07:00
Laxman Dewangan
7e1161f8af ARM: tegra: select PINCTRL_TEGRA124 for Tegra124 SoC
The pincontrol driver for Tegra124 is build through config
PINCTRL_TEGRA124. Select this config option whenever Tegra124
SoC is enabled.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-12 11:35:46 -07:00
Stephen Warren
b988ba1b4e ARM: tegra: add missing break to fuse initialization code
Add a missing break to the switch in tegra_init_fuse() which determines
which SoC the code is running on. This prevents the Tegra30+ fuse
handling code from running on Tegra20.

Fixes: 3bd1ae57f7 ("ARM: tegra: add fuses as device randomness")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-11 17:09:11 -08:00
Stephen Warren
80b28791ff ARM: tegra: pass reset to tegra_powergate_sequence_power_up()
Tegra's clock driver now provides an implementation of the common
reset API (include/linux/reset.h). Use this instead of the old Tegra-
specific API; that will soon be removed.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-By: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
2013-12-11 16:43:11 -07:00
Stephen Warren
e04214683a ARM: tegra: select the reset framework
The Tegra clock driver is built unconditionally when Tegra support is
enabled. In order to avoid having to ifdef the forthcoming reset driver
implementation, have ARCH_TEGRA select RESET_CONTROLLER.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-11 16:42:44 -07:00
Heikki Krogerus
7bb3ed21f9 ARM: tegra: add gpiod_lookup table for paz00
This makes it possible to request the gpio descriptors in
rfkill_gpio driver regardless of the platform.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-11 12:49:29 +01:00
Stephen Warren
6dee8200b7 ARM: tegra: use section-sized static mappings for LPAE too
The static mappings for Tegra's PPSB and APB regions were sized at 1MB
in order to allow mapping via sections in order to avoid burning RAM for
PTEs. On LPAE, sections are 2MB, so the static mappings need to be
larger in order to gain the same benefit. Set IO_{PPSB,APB}_SIZE to
SECTION_SIZE so this adjusts automatically.

While we're fiddling with iomap.h, compress IO_{IRAM,CPU}_VIRT together
to save virtual address space in the vmalloc region; these two regions
are mapped using PTEs.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-04 12:25:25 -07:00
Stephen Warren
2f1d70af28 ARM: tegra: don't hard-code DEBUG_LL baud rate
Stop writing to the UART clock divider registers in the Tegra DEBUG_LL
code. This allows the DEBUG_LL output to use whatever baud rate was set
up by the bootloader. Some users are using higher rates than 115200.

This removes the only usage of tegra_uart_config[3], so reduce the size
allocated for that array.

Finally, fix busyuart() so that it only waits for THRE and not TEMT. For
some reason, TEMT doesn't get asserted (at least on Tegra30 Beaver) at
9600 baud, even though it does at 115200 baud. This sounds like a HW bug,
but I haven't investigated. For reference, U-Boot's serial code has
always only checked THRE, and not checked TEMT.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Paul Walmsley <pwalmsley@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-04 12:25:22 -07:00
Alexandre Courbot
cdcb5a074c ARM: tegra: switch FUSE clock on before usage
FUSE clock is enabled by most bootloaders, but we cannot expect it to be
on in all contexts (e.g. kexec).

Ensure the FUSE clock is enabled before any of its registers is touched.
Since FUSE is touched very early during system boot (before the clock
devices are registered), directly manipulate the clock register bit in
case the clock device cannot be acquired.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-04 12:24:22 -07:00
Linus Torvalds
26b265cd29 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 - Made x86 ablk_helper generic for ARM
 - Phase out chainiv in favour of eseqiv (affects IPsec)
 - Fixed aes-cbc IV corruption on s390
 - Added constant-time crypto_memneq which replaces memcmp
 - Fixed aes-ctr in omap-aes
 - Added OMAP3 ROM RNG support
 - Add PRNG support for MSM SoC's
 - Add and use Job Ring API in caam
 - Misc fixes

[ NOTE! This pull request was sent within the merge window, but Herbert
  has some questionable email sending setup that makes him public enemy
  #1 as far as gmail is concerned.  So most of his emails seem to be
  trapped by gmail as spam, resulting in me not seeing them.  - Linus ]

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (49 commits)
  crypto: s390 - Fix aes-cbc IV corruption
  crypto: omap-aes - Fix CTR mode counter length
  crypto: omap-sham - Add missing modalias
  padata: make the sequence counter an atomic_t
  crypto: caam - Modify the interface layers to use JR API's
  crypto: caam - Add API's to allocate/free Job Rings
  crypto: caam - Add Platform driver for Job Ring
  hwrng: msm - Add PRNG support for MSM SoC's
  ARM: DT: msm: Add Qualcomm's PRNG driver binding document
  crypto: skcipher - Use eseqiv even on UP machines
  crypto: talitos - Simplify key parsing
  crypto: picoxcell - Simplify and harden key parsing
  crypto: ixp4xx - Simplify and harden key parsing
  crypto: authencesn - Simplify key parsing
  crypto: authenc - Export key parsing helper function
  crypto: mv_cesa: remove deprecated IRQF_DISABLED
  hwrng: OMAP3 ROM Random Number Generator support
  crypto: sha256_ssse3 - also test for BMI2
  crypto: mv_cesa - Remove redundant of_match_ptr
  crypto: sahara - Remove redundant of_match_ptr
  ...
2013-11-23 16:18:25 -08:00
Linus Torvalds
71f777ed50 ARM: SoC fixes for 3.13 merge window
A first set of batches of fixes for 3.13. The diffstat is large mostly
 because we're adding a defconfig for a family that's been lacking it, and
 there's some missing clock information added for i.MX and OMAP.
 
 The at91 new code is around dealing with RTC/RTT reset at boot to fix possible
 hangs due to pending wakeup interrupts coming in during early boot.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJShxvaAAoJEIwa5zzehBx3rz0P/R5I3+gENxHKXQaeRrgNRtE0
 wcrPNkNoVoIWZ8FzRg3l0qzCeF2WvFXnjS9uM4oT5IbYdCdfu6JNvVvvj6CjccE0
 9JBF+cMUqhDhjlYYPb8u4NFDmiBAjE0kr0bDX7yg1ogDn/FKbr1Zxsu1I2cYkKpF
 JKk2jzf1dnjnngJznVkX0GJy7INsloul9jBQxiHLFHy2dB9qRovW2uIfCdkJ0QjL
 2h0hwKjSdbRX8Q4jQs0mCCTNblbYFVSHgYP+FpE0BJFfNwPIItTTKGDYRu0I+pBG
 gzLMS8UWVQO4vykpXwUkkD+YfgK/1woMGpAay1rI86GIvYOEXITSsoWsNhbmJ9gp
 I4zvWETz11C9HpVQACuXIc3+5mgiHfKQdy4gp52vMUjoTOGLKSZNHWQICgxOEe0U
 qN/kXVlhA1eYkdViXfVQyCpmr3TbIgjeYmXLIlptEYyFN1W7s8L0qOSRZeBkIo66
 U+PlqjABySZZ24532eF6Dp8DLmB4jp3r0I1U17nYj5N9vTgeoyQk0x63zza5vt+Q
 n+7talaazQbFGe151g7pKFrUezPeWYZYNd5CC/wUce/VSH+XgcSlzGFkw/DPuARM
 QFtTAFTaFODt7zofQcd6L2lMIIRlRoU1aUgrb7c9YZlLl59b4BkEhD1dcc02X7pm
 Ie7rtjvHT8isVRcIWZ16
 =0oVK
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A first set of batches of fixes for 3.13.  The diffstat is large
  mostly because we're adding a defconfig for a family that's been
  lacking it, and there's some missing clock information added for i.MX
  and OMAP.

  The at91 new code is around dealing with RTC/RTT reset at boot to fix
  possible hangs due to pending wakeup interrupts coming in during early
  boot"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
  ARM: OMAP2+: Fix build for dra7xx without omap4 and 5
  ARM: OMAP2+: omap_device: maintain sane runtime pm status around suspend/resume
  doc: devicetree: Add bindings documentation for omap-des driver
  ARM: dts: doc: Document missing compatible property for omap-sham driver
  ARM: OMAP3: Beagle: fix return value check in beagle_opp_init()
  ARM: at91: fix hanged boot due to early rtt-interrupt
  ARM: at91: fix hanged boot due to early rtc-interrupt
  video: exynos_mipi_dsim: Remove unused variable
  ARM: highbank: only select errata 764369 if SMP
  ARM: sti: only select errata 764369 if SMP
  ARM: tegra: init fuse before setting reset handler
  ARM: vt8500: add defconfig for v6/v7 chips
  ARM: integrator_cp: Set LCD{0,1} enable lines when turning on CLCD
  ARM: OMAP: devicetree: fix SPI node compatible property syntax items
  pinctrl: single: call pcs_soc->rearm() whenever IRQ mask is changed
  ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init()
  MAINTAINERS: drop discontinued mailing list
  ARM: dts: i.MX51: Fix OTG PHY clock
  ARM: imx: set up pllv3 POWER and BYPASS sequentially
  ARM: imx: pllv3 needs relock in .set_rate() call
  ...
2013-11-16 12:45:55 -08:00
Wolfram Sang
16735d022f tree-wide: use reinit_completion instead of INIT_COMPLETION
Use this new function to make code more comprehensible, since we are
reinitialzing the completion, not initializing.

[akpm@linux-foundation.org: linux-next resyncs]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 09:32:21 +09:00
Alexandre Courbot
cd198d6dc4 ARM: tegra: init fuse before setting reset handler
CPU reset handler was set before fuse is initialized, but
tegra_cpu_reset_handler_enable() uses tegra_chip_id, which is set by
tegra_init_fuse(). This patch reorders the calls so the CPU reset
handler code does not read an uninitialized variable.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-11-14 10:44:31 -08:00
Linus Torvalds
f47671e2d8 Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM updates from Russell King:
 "Included in this series are:

   1. BE8 (modern big endian) changes for ARM from Ben Dooks
   2. big.Little support from Nicolas Pitre and Dave Martin
   3. support for LPAE systems with all system memory above 4GB
   4. Perf updates from Will Deacon
   5. Additional prefetching and other performance improvements from Will.
   6. Neon-optimised AES implementation fro Ard.
   7. A number of smaller fixes scattered around the place.

  There is a rather horrid merge conflict in tools/perf - I was never
  notified of the conflict because it originally occurred between Will's
  tree and other stuff.  Consequently I have a resolution which Will
  forwarded me, which I'll forward on immediately after sending this
  mail.

  The other notable thing is I'm expecting some build breakage in the
  crypto stuff on ARM only with Ard's AES patches.  These were merged
  into a stable git branch which others had already pulled, so there's
  little I can do about this.  The problem is caused because these
  patches have a dependency on some code in the crypto git tree - I
  tried requesting a branch I can pull to resolve these, and all I got
  each time from the crypto people was "we'll revert our patches then"
  which would only make things worse since I still don't have the
  dependent patches.  I've no idea what's going on there or how to
  resolve that, and since I can't split these patches from the rest of
  this pull request, I'm rather stuck with pushing this as-is or
  reverting Ard's patches.

  Since it should "come out in the wash" I've left them in - the only
  build problems they seem to cause at the moment are with randconfigs,
  and since it's a new feature anyway.  However, if by -rc1 the
  dependencies aren't in, I think it'd be best to revert Ard's patches"

I resolved the perf conflict roughly as per the patch sent by Russell,
but there may be some differences.  Any errors are likely mine.  Let's
see how the crypto issues work out..

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits)
  ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h"
  ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg().
  ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h
  ARM: 7871/1: amba: Extend number of IRQS
  ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise()
  ARM: 7872/1: Support arch_irq_work_raise() via self IPIs
  ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode
  ARM: 7878/1: nommu: Implement dummy early_paging_init()
  ARM: 7876/1: clear Thumb-2 IT state on exception handling
  ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}()
  ARM: footbridge: fix build warnings for netwinder
  ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu
  ARM: fix misplaced arch_virt_to_idmap()
  ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown
  ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation
  ARM: 7869/1: remove unused XSCALE_PMU Kconfig param
  ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t
  ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments
  ARM: 7862/1: pcpu: replace __get_cpu_var_uses
  ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code
  ...
2013-11-14 08:51:29 +09:00
Linus Torvalds
aac59e3efc ARM: SoC platform changes for 3.13
New and updated SoC support. Among the things new for this release are:
 
 - More support for the AM33xx platforms from TI
 - Tegra 124 support, and some updates to older tegra families as well
 - imx cleanups and updates across the board
 - A rename of Broadcom's Mobile platforms which were introduced as ARCH_BCM,
   and turned out to be too broad a name. New name is ARCH_BCM_MOBILE.
 - A whole bunch of updates and fixes for integrator, making the platform code
   more modern and switches over to DT-only booting.
 - Support for two new Renesas shmobile chipsets. Next up for them is more work
   on consolidation instead of introduction of new non-multiplatform SoCs, we're
   all looking forward to that!
 - Misc cleanups for older Samsung platforms, some Allwinner updates, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSgBrRAAoJEIwa5zzehBx3v+QP/1Z4DOzOckU7sb/IZZMXxVcS
 C9G68x1n2lwqQwmMrjDAnFm+qKGDlb2SzHnUNiVy4niaGXdGSDtVzSEzK01LhUuz
 BchWRy5Vb+pq0/bVLxtkqUPf0LEH/1as0uQVJNxwmV+SS9OvH+NpJHo2X6motYtX
 W0l/NHwD/NYxwkjZTHUgZW9si1a8ZaG41i/h05IOpkww7RNcmtubWmQQIbKwmadc
 z2QO3NsrcUvMgnoF9fOEJU2aurIx1s+6jpG6/fD1WWejCMuf0JulyfV7egREFgty
 yp8QhnSTDaOvV0Gjrpx+4ERkwpVjvESpZIJoYHXjbScZHTCzkVDBLwwpmgYB1Mrb
 KOKTt6+p8RAMFm43Rkf42SW8RXMM8nifed/H5Lwimi8qQT4+PuWM4i524P0Bb0Bj
 tANHU2twUbY1VFRycGwWbTwPWtwxD4B0c6xflon84IGsZC31mvcfRcGaqaMtwTH4
 J6CN0Bk3Tp0BUOveo0pdTPtrgOWm85MxWrzbjppKY7Lgl4A19iXqvSQjIt1sjJGz
 5d8hH7KX26jKT24FiFp0fttOCRVVmg5Ks6sn2BTjX83w9S1pUg4yjZTU9cdbFbyN
 zvi0d7YQYWOJTlSQlY5m5xqvRzeByAae4EDA6LKdh6JQsPyQEhHdxvMj7/ZURf8W
 4jPMsgi+GxP8AGhpb20/
 =WYJl
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "New and updated SoC support.  Among the things new for this release
  are:

   - More support for the AM33xx platforms from TI
   - Tegra 124 support, and some updates to older tegra families as well
   - imx cleanups and updates across the board
   - A rename of Broadcom's Mobile platforms which were introduced as
     ARCH_BCM, and turned out to be too broad a name.  New name is
     ARCH_BCM_MOBILE.
   - A whole bunch of updates and fixes for integrator, making the
     platform code more modern and switches over to DT-only booting.
   - Support for two new Renesas shmobile chipsets.  Next up for them is
     more work on consolidation instead of introduction of new
     non-multiplatform SoCs, we're all looking forward to that!
   - Misc cleanups for older Samsung platforms, some Allwinner updates,
     etc"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits)
  ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config
  ARM: bcm_defconfig: Run "make savedefconfig"
  ARM: bcm281xx: Add ARCH Timers to config
  rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm)
  ARM: vexpress: Enable platform-specific options in defconfig
  ARM: vexpress: Make defconfig work again
  ARM: sunxi: remove .init_time hooks
  ARM: imx: enable suspend for imx6sl
  ARM: imx: ensure dsm_request signal is not asserted when setting LPM
  ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter()
  ARM: imx6q: move low-power code out of clock driver
  ARM: imx: drop extern with function prototypes in common.h
  ARM: imx: reset core along with enable/disable operation
  ARM: imx: do not return from imx_cpu_die() call
  ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING
  ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options
  ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO
  ARM: imx: replace imx6q_restart() with mxc_restart()
  ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt
  ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt
  ...
2013-11-11 16:49:45 +09:00
Olof Johansson
0fc869e8f2 Merge branch 'cleanup/dt-clock' into next/soc
Merging in dt clock cleanup as a pre-req with some of the later SoC branches.

There are a handful of conflicts here -- some of the already merged SoC
branches should have been based on the cleanup but weren't.

In particular, a remove/add of include on highbank and two remove/remove
conflicts on kirkwood were fixed up.

* cleanup/dt-clock: (28 commits)
  ARM: vt8500: remove custom .init_time hook
  ARM: vexpress: remove custom .init_time hook
  ARM: tegra: remove custom .init_time hook
  ARM: sunxi: remove custom .init_time hook
  ARM: sti: remove custom .init_time hook
  ARM: socfpga: remove custom .init_time hook
  ARM: rockchip: remove custom .init_time hook
  ARM: prima2: remove custom .init_time hook
  ARM: nspire: remove custom .init_time hook
  ARM: nomadik: remove custom .init_time hook
  ARM: mxs: remove custom .init_time hook
  ARM: kirkwood: remove custom .init_time hook
  ARM: imx: remove custom .init_time hook
  ARM: highbank: remove custom .init_time hook
  ARM: exynos: remove custom .init_time hook
  ARM: dove: remove custom .init_time hook
  ARM: bcm2835: remove custom .init_time hook
  ARM: bcm: provide common arch init for DT clocks
  ARM: call of_clk_init from default time_init handler
  ARM: vt8500: prepare for arch-wide .init_time callback
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-28 10:11:42 -07:00
Russell King
59fd3033b5 ARM: fix build errors caused by selection of errata 798181
Several configurations are selecting errata 798181 without SMP
being selected.  This causes a warning from Kconfig:

warning: (ARCH_HIGHBANK && ARCH_KEYSTONE && SOC_OMAP5 && ARCH_TEGRA_114_SOC) selects ARM_ERRATA_798181 which has unmet direct dependencies (CPU_V7 && SMP)

The dependencies are compile time dependencies; select violates these,
resulting in:

arch/arm/kernel/built-in.o: In function `setup_processor':
psci.c:(.init.text+0x808): undefined reference to `erratum_a15_798181_init'

at build time.  Fix this by fixing the select statements for Tegra and
Highbank.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-21 09:33:49 +01:00
Thierry Reding
bd6a9ddcb9 ARM: tegra: Add Tegra114 powergate support
Extend the list of power gates found on Tegra114. Note that there are
now holes in the list, so perhaps a simple array is no longer the best
data structure to represent it.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-18 16:28:11 -06:00
Thierry Reding
f0ea2e0bb8 ARM: tegra: Constify list of CPU domains
There's no need to modify these at runtime, it is static data and never
needs to change.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-18 16:28:11 -06:00
Thierry Reding
c1e96da28c ARM: tegra: Remove duplicate powergate defines
Instead of duplicating powergate defines, reuse the ones from the
include/linux/tegra-powergate.h header file.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-18 16:28:10 -06:00
Joseph Lo
f0c4ac1329 ARM: tegra: add LP1 support code for Tegra124
The LP1 suspend procedure is the same with Tegra30 and Tegra114. Just
need to update the difference of the register address, then we can
continue to share the code.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-18 16:28:10 -06:00
Joseph Lo
92e94fe1cd ARM: tegra: re-calculate the LP1 data for Tegra30/114
This patch re-calculates the LP1 data of tegra30/114_sdram_pad_address
to base on its label not rely on others. This can make easier to
maintain if some other Tegra chips keep re-using these codes in the
future. And change the name of tegra30_sdram_pad_save to
tegra_sdram_pad_save to make it more common to other chips.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-18 16:28:09 -06:00
Joseph Lo
24036fdc76 ARM: tegra: enable CPU idle for Tegra124
The CPUIdle function of Tegra124 is identical to Tegra114, so we share
the same driver with Tegra114.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-18 16:28:09 -06:00
Joseph Lo
d127e9c5c5 ARM: tegra: make tegra_resume can work with current and later chips
Because the CPU0 was the first up and the last down core when cluster
power up/down or platform suspend. So only CPU0 needs the rest of the
functions to reset flow controller and re-enable SCU and L2. We also
move the L2 init function for Cortex-A15 to there. The secondery CPU
can just call cpu_resume.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-18 16:28:08 -06:00
Joseph Lo
9997e62682 ARM: tegra: CPU hotplug support for Tegra124
The procedure of CPU hotplug for Tegra124 is same with Tegra114. We
re-use the same function with it.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-18 16:28:08 -06:00
Joseph Lo
6ca91f9d64 ARM: tegra: add PMC compatible value for Tegra124
The PMC HW is not identical to the existing Tegra SoC. Hence add to it.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-18 16:28:07 -06:00
Joseph Lo
7394447505 ARM: tegra: add Tegra124 SoC support
Add Tegra124 SoC support that base on CortexA15MP Core. And enable the
SMP function that can re-use the same procedure with Tegra114.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-18 16:28:07 -06:00
Stephen Warren
3bd1ae57f7 ARM: tegra: add fuses as device randomness
Various fuses on Tegra include information that's unique to an individual
chip, or a subset of chips. Call add_device_randomness() with this data
to perturb the initial state of the random pool.

Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-18 16:28:06 -06:00
Kevin Hilman
b25a51cb16 ARM: tegra: cleanup for 3.13
This branch mainly removes dead code and defines that were useful only
 when booting using board files. A few other misc cleanups are also
 included.
 
 This branch is based on previous pull request
 tegra-for-3.13-deps-for-arm-init-time-cleanup.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSYDBlAAoJEMzrak5tbycxXIoP/2A5Vt2G11q+Fv/AX7zSLCPB
 f6eoTjao9ye2FGesHk9RkZFxaaPNmeI9OY+7SNnaPvDlRruQdlgd85C5DJjZGwge
 65mw/e7hyaWKhhHk9KUOCfRB9W4upVdkvn7rIQgt+Av1RU/P/vereFku85kpzYDp
 7eAawZuBoOOoeaQpK5s/+xlOUV/Zfc/ri0mwO6pJdaFfIrS8Suk2DncpuMsfhSFf
 L4FwMDkqfZ5vbFP97l2FsNlSlIAhjGoq/IOQ8GEfUG3TdVQrTC3vJVATw4wO4Ndx
 LxKvmEIZeys3PihwzbtYKRsv4gS3IRhj82D29a3l9/nM2hdfoaHVb3G5pivPEPaG
 jkguqSllXUSfWRM0PbT6Yon9yfynOGjuJkI+hxd0nW52Tglx7NiubBK3ywUu+Hkk
 lrVg+AL63feyYAxWJEhg5lS7+BkH31VNYbRu6U8NsDg3lgnQdhkd76QyAsF9Ep7T
 YY94oP8HqIPd/HE8gNkBdxltA8yo1+bxHnYbqtlacOqd+ASIVt5s4L639qpZyn+z
 Ykyfuj4XEYZfv4Czh5EcKRQZxUFI6vcWos2nifM2SRSWEQaNBRZqf/ZuOIiZ1N67
 piZA8tenwSWJiYo7gc75/DiPEpJf70XkKcwEd5lEUs4NXGswPJQp73DLhhiPMCiT
 ScS3GG65ndH5GUwHO7lb
 =5/r6
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.13-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/cleanup

ARM: tegra: cleanup for 3.13

This branch mainly removes dead code and defines that were useful only
when booting using board files. A few other misc cleanups are also
included.

This branch is based on previous pull request
tegra-for-3.13-deps-for-arm-init-time-cleanup.

* tag 'tegra-for-3.13-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: fix ARCH_TEGRA_114_SOC select sort order
  ARM: tegra: make tegra_init_fuse() __init
  ARM: tegra: remove much of iomap.h
  ARM: tegra: move resume vector define to irammap.h
  ARM: tegra: delete gpio-names.h
  ARM: tegra: delete stale header content
  ARM: tegra: remove common.c

Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-10-17 15:37:59 -07:00
Stephen Warren
b6bda4e0d2 ARM: tegra: fix ARCH_TEGRA_114_SOC select sort order
All the other select statements are alphabetically sorted. Fix the one
remaining escape.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-07 13:16:37 -06:00
Uwe Kleine-König
07d8a49c26 ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP
CLKDEV_LOOKUP selects HAVE_CLK and COMMON_CLK selects CLKDEV_LOOKUP. So
all symbols that select at least two of these symbols can be simplified.

For imx, omap2 and ux500 some rearrangements were necessary before the
simplification.

Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-07 10:41:32 -07:00
Sebastian Hesselbarth
41136b664a ARM: tegra: remove custom .init_time hook
With arch/arm calling of_clk_init(NULL) from time_init(), we can now
remove custom .init_time hooks.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2013-09-29 21:09:46 +02:00
Stephen Warren
ec795ad84c ARM: tegra: remove tegra_chip_uid()
Following commit f5b38c5 "crypto: tegra - use kernel entropy instead
of ad-hoc", this function is no longer used. It's also only accurate
for Tegra20 and not later SoCs. So, remove it.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-09-24 06:02:23 +10:00
Stephen Warren
5875df17a8 ARM: tegra: make tegra_init_fuse() __init
It's a one-time initialization function, called early during boot.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-09-17 13:44:23 -06:00
Stephen Warren
4cf6791a60 ARM: tegra: remove much of iomap.h
iomap.h defines the base address of Tegra peripherals. Most of this
information comes from device tree now, and hence can be deleted.
Entries are kept for various system peripherals that low-level code
(such as initial boot, system suspend/resume, debug) still requires.

Removing the values removes the temptation for someone to use them.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-09-17 13:44:22 -06:00
Stephen Warren
fddb770dbe ARM: tegra: move resume vector define to irammap.h
irammap.h's purpose is to define the layout/usage of IRAM. As such,
TEGRA_IRAM_CODE_AREA should have been added there rather than iomap.h.
Move the define, and rename it something more descriptive.

Cc: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-09-17 13:44:22 -06:00
Stephen Warren
6ae894166c ARM: tegra: delete gpio-names.h
gpio-names.h defines IDs for GPIOs. This information now comes from
device tree, so delete this stale header. The one remaining use-case is
board-paz00.c's wifi_rfkill device. Isolate the knowledge of those GPIO
IDs into that file. Let's hope the values stay valid:-)

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-09-17 13:44:21 -06:00
Stephen Warren
6163afd5e1 ARM: tegra: delete stale header content
A few function prototypes were left in header files during code re-
organization. Delete them.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-09-17 13:44:21 -06:00
Stephen Warren
51100bdc06 ARM: tegra: remove common.c
common.c was create to contain code shared across the various Tegra board
files. There is now only one board file, tegra.c. So, move the code there.
One exception is the PMC reboot routine, which moves to pmc.c, and now
takes advantage of the 'standard' tegra_pmc_readl/writel functions.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-09-17 13:44:21 -06:00
Stephen Warren
d2207071b3 ARM: tegra: split tegra_pmc_init() in two
Tegra's board file currently initializes clocks much earlier than those
for most other ARM SoCs. The reason is:

* The PMC HW block is involved in the path of some interrupts (i.e. it
inverts, or not, the IRQ input pin dedicated to the PMIC).

* So, that part of the PMC must be initialized early so that the IRQ
polarity is correct.

* The PMC initialization is currently monolithic, and the PMC has some
clock inputs, so the init routine ends up calling of_clk_get_by_name(),
and hence clocks must be set up early too.

In order to defer clock initialization to the more typical location,
split out the portions of tegra_pmc_init() that are truly IRQ-related
into a separate tegra_pmc_init_irq(), which can be called from the
machine descriptor's .init_irq() function, and defer the rest until
the machine descriptor's .init_machine() function. This allows the
clock initiliazation to happen from the machine descriptor's
.init_time() function, as is typical.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-09-17 13:42:17 -06:00
Linus Torvalds
b4b50fd78b ARM: SoC platform changes for 3.12
This branch contains mostly additions and changes to platform enablement
 and SoC-level drivers. Since there's sometimes a dependency on device-tree
 changes, there's also a fair amount of those in this branch.
 
 Pieces worth mentioning are:
 
 - Mbus driver for Marvell platforms, allowing kernel configuration
   and resource allocation of on-chip peripherals.
 - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
 - Preparation of MSI support for Marvell platforms.
 - Addition of new PCI-e host controller driver for Tegra platforms
 - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
   platforms in the device tree sources and header files.
 - Various suspend/PM updates for Tegra, including LP1 support.
 - Versatile Express support for MCPM, part of big little support.
 - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7)
 - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.
 
 The code that touches other architectures are patches moving
 MSI arch-specific functions over to weak symbols and removal of
 ARCH_SUPPORTS_MSI, acked by PCI maintainers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKhYmAAoJEIwa5zzehBx322AP/1ONYs8o8f7/Gzq6lZvTN6T3
 0pBTApg6Jfioi3lwKvUAEIcsW82YKQ+UZkbW66GQH6+Ri4aZJKZHuz0+JPU67OJ4
 LtSLuzVWrymy2VOOUvAnS/SXkOZw/pHhU4cLNHn1dMndhUL1Uqp9/XwuiHEQyFsP
 uOkpcBtIu0EWElov0PKKZ5SWBg8JJs2vy5ydiViGelWHCrZvDDZkWzIsDcBQxJLQ
 juzT4+JE+KOu7vKmfw78o6iHoCS2TBRAN9YUCajRb8Wl+out1hrTahHnDWaZ5Mce
 EskcQNkJROqFbjD4k3ABN4XGTv2VDmrztIwFe0SEQ7Dz/9ypCrBGT69uI9xIqTXr
 GwVRIwAUFTpMupK0gy93z1ajV3N0CXV79out9+jQNUQybYE+czp8QOyhmuc1tZx0
 8fn9jlBQe9Vy6yrs39gEcE7nUwrayeyQ+6UvqqwsE2pWZabNAnCMSPX5+QIu+T/3
 tQ7+jYmfFeserp1sIDOHOnxfhtW9EI6U9d1h/DUCwrsuFdkL9ha4M/vh9Pwgye98
 tBdz0T4yE39AJQwwFWRkv1jcQKcGu6WqJanmvS4KRBksGwuLWxy+ewOnkz2ifS25
 ZYSyxAryZRBvQRqlOK11rXPfRcbGcY0MG9lkKX96rGcyWEizgE1DdjxXD8HoIleN
 R8heV6GX5OzlFLGX2tKK
 =fJ5x
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "This branch contains mostly additions and changes to platform
  enablement and SoC-level drivers.  Since there's sometimes a
  dependency on device-tree changes, there's also a fair amount of
  those in this branch.

  Pieces worth mentioning are:

   - Mbus driver for Marvell platforms, allowing kernel configuration
     and resource allocation of on-chip peripherals.
   - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
   - Preparation of MSI support for Marvell platforms.
   - Addition of new PCI-e host controller driver for Tegra platforms
   - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
     platforms in the device tree sources and header files.
   - Various suspend/PM updates for Tegra, including LP1 support.
   - Versatile Express support for MCPM, part of big little support.
   - Allwinner platform support for A20 and A31 SoCs (dual and quad
     Cortex-A7)
   - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.

  The code that touches other architectures are patches moving MSI
  arch-specific functions over to weak symbols and removal of
  ARCH_SUPPORTS_MSI, acked by PCI maintainers"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits)
  tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE
  PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource
  ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list
  ARM: dts: vf610-twr: enable i2c0 device
  ARM: dts: i.MX51: Add one more I2C2 pinmux entry
  ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
  ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
  ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
  ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
  ARM: dts: i.MX27: Disable AUDMUX in the template
  ARM: dts: wandboard: Add support for SDIO bcm4329
  ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
  ARM: dts: imx53-qsb: Make USBH1 functional
  ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
  ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
  ARM: dts: imx6qdl-sabresd: Add touchscreen support
  ARM: imx: add ocram clock for imx53
  ARM: dts: imx: ocram size is different between imx6q and imx6dl
  ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
  ARM: dts: i.MX27: Remove clock name from CPU node
  ...
2013-09-06 13:30:06 -07:00
Linus Torvalds
8e73e367f7 ARM: SoC cleanups for 3.12
This branch contains code cleanups, moves and removals for 3.12.
 
 There's a large number of various cleanups, and a nice net removal of
 13500 lines of code.
 
 Highlights worth mentioning are:
 
 - A series of patches from Stephen Boyd removing the ARM local timer API.
 - Move of Qualcomm MSM IOMMU code to drivers/iommu.
 - Samsung PWM driver cleanups from Tomasz Figa, removing legacy PWM driver
   and switching over to the drivers/pwm one.
 - Removal of some unusued auto-generated headers for OMAP2+ (PRM/CM).
 
 There's also a move of a header file out of include/linux/i2c/ to
 platform_data, where it really belongs. It touches mostly ARM platform
 code for include changes so we took it through our tree.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKg/NAAoJEIwa5zzehBx3vxIP/19ouV4WrzOeEMz2Id8bYT5/
 Tu9HRm+PJJ2O+4P+DYlycRAEHsbuDbwgdcqToH3quca1YnIcoJgY0FA6D0ihQ5uE
 EvTgFIpkNMLnR43GYDOE3a/rR3hYPg5oQabKFn7ZGLG2ND3D3d2N05WT8XNbTYDk
 nvCXvyRRT1ynCEzbxRBiE8x62ao4bqa5dZ1zrHHIEoakqciXEng8IU0nxx7SUarv
 61GBJHVoGFpwOWXdgt2uxyXFbn6nMrhf33ynB+RRAZhqlrC8FROj8Iz+3EoKSAHc
 fMJSw6jgdjMCfTDvi0j/eemoNC4fm0eP17Dz9WcwxtIrJPNFVrxZq+biDnpb49nM
 IHsbNrILosw9AbHr3C0kTU9tp+Jie2cE1RWHqTIN3S3zb4qN+fIJiU6o6LMhsNP5
 +ZxL4M5IYmvZYbU3a+A00TPwVRqBbsZB+et9RtYZsdpepovDiN4XcixEoT7ffqrt
 VLjJyoX7Aqmds46lMdsdD3bpPkREmMdf8aMm5fvdIqwbJi1pFMMGMdTgN2WLG5aM
 r0bj/DizxL7Brs8RHwOScUgXteZs3gg87v5Ns/3zAyJZvE4norPAiT+EJeXylpRO
 LDqqaypFs75nU+mWLNo8Fzck4Xue55SBqx5Bo3aD/Smk8B6r4KMqnMKVsV5RFHAU
 XfWb49HulUwHHdn5DAPx
 =1vE4
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This branch contains code cleanups, moves and removals for 3.12.

  There's a large number of various cleanups, and a nice net removal of
  13500 lines of code.

  Highlights worth mentioning are:

   - A series of patches from Stephen Boyd removing the ARM local timer
     API.
   - Move of Qualcomm MSM IOMMU code to drivers/iommu.
   - Samsung PWM driver cleanups from Tomasz Figa, removing legacy PWM
     driver and switching over to the drivers/pwm one.
   - Removal of some unusued auto-generated headers for OMAP2+ (PRM/CM).

  There's also a move of a header file out of include/linux/i2c/ to
  platform_data, where it really belongs.  It touches mostly ARM
  platform code for include changes so we took it through our tree"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
  ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK
  gpio: (gpio-pca953x) move header to linux/platform_data/
  arm: zynq: hotplug: Remove unreachable code
  ARM: SAMSUNG: Remove unnecessary exynos4_default_sdhci*()
  tegra: simplify use of devm_ioremap_resource
  ARM: SAMSUNG: Remove plat/regs-timer.h header
  ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header
  ARM: SAMSUNG: Remove pwm-clock infrastructure
  ARM: SAMSUNG: Remove old PWM timer platform devices
  pwm: Remove superseded pwm-samsung-legacy driver
  ARM: SAMSUNG: Modify board files to use new PWM platform device
  ARM: SAMSUNG: Rework private data handling in dev-backlight
  pwm: Add new pwm-samsung driver
  ARM: mach-mvebu: remove redundant DT parsing and validation
  ARM: msm: Only compile io.c on platforms that use it
  iommu/msm: Move mach includes to iommu directory
  ARM: msm: Remove devices-iommu.c
  ARM: msm: Move mach/board.h contents to common.h
  ARM: msm: Migrate msm_timer to CLOCKSOURCE_OF_DECLARE
  ARM: msm: Remove TMR and TMR0 static mappings
  ...
2013-09-06 13:21:16 -07:00
Thierry Reding
e8a72e2a5d ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list
The ARCH_SUPPORTS_MSI symbol was removed during the recent patches that
introduce the MSI chip infrastructure. Drop it from the list of selected
symbols. While at it, move the MIGHT_HAVE_PCI symbol so the list stays
sorted alphabetically.

Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-29 12:50:29 -07:00
Kevin Hilman
bfa664f21b ARM: tegra: core SoC enhancements for 3.12
This branch includes a number of enhancements to core SoC support for
 Tegra devices. The major new features are:
 
 * Adds a new CPU-power-gated cpuidle state for Tegra114.
 * Adds initial system suspend support for Tegra114, initially supporting
   just CPU-power-gating during suspend.
 * Adds "LP1" suspend mode support for all of Tegra20/30/114. This mode
   both gates CPU power, and places the DRAM into self-refresh mode.
 * A new DT-driven PCIe driver to Tegra20/30. The driver is also moved
   from arch/arm/mach-tegra/ to drivers/pci/host/.
 
 The PCIe driver work depends on the following tag from Thomas Petazzoni:
 git://git.infradead.org/linux-mvebu.git mis-3.12.2
 ... which is merged into the middle of this pull request.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSDlwwAAoJEMzrak5tbycxR68QAJZ/Izc9Izj0JH8hmCEvMNfi
 ub1DQfWAy3oXk0ttkk+BMvuyD8JTvBr8LSK8GqjZs//rFGlW81A4NHTvCwoKZjKe
 hgrRgI2B1wj3Um1sp8le9D0klKrTcfmpXrOxH8ALgz0BIpMge8AGZHkV0SrfQa1z
 bKiISFVAw12WJCVrQ2nbzpZGU51lbyJ/+RghttM1a8LuS2P03CZgt2kqiytk3UVK
 uiGEy3sCkjXLFO3EsUvM6ha623S6BumCAYjNfgDowTVKaoEe1r2TD4bFeU6lGcXJ
 mlVTv0Kywazf4Q2gKzkbDz8UQMArW4hok2iILHzz+sf/Rn0hie5XVqhFlbBlcae8
 vyWsHmqvmE9BJAK2G2RLs9cJCTzEpEyAjUWfE3sIIa3ztSguT5+PHndDLR/d76aS
 j8L3FYReICZ1NuNw1JSQPFs9g2EWJbNRiy+8o9O2elsJMpLDBj/FcV6TVpudbBTI
 z7hvN+XSVYUaCVD4e8ma9YoC3VGseiAZvd+Y8hPd2MFBECVPNpy2bOacieU6Bgxh
 zjSBXZ/URxN3rTkv9+F3BLWAOfVmJYN0rKV9YfM/rqpWjc9iQx30m1fRZDnXWhvd
 ps8eFIYsKqc6v9AAugl/RexFy4Laav9eREjb0k2LA8ClLhK/qLLuiisVmKWS/grh
 lX9tzPEG2nZcjxSYaEjz
 =ve9i
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc

From: Stephen Warren:
ARM: tegra: core SoC enhancements for 3.12

This branch includes a number of enhancements to core SoC support for
Tegra devices. The major new features are:

* Adds a new CPU-power-gated cpuidle state for Tegra114.
* Adds initial system suspend support for Tegra114, initially supporting
  just CPU-power-gating during suspend.
* Adds "LP1" suspend mode support for all of Tegra20/30/114. This mode
  both gates CPU power, and places the DRAM into self-refresh mode.
* A new DT-driven PCIe driver to Tegra20/30. The driver is also moved
  from arch/arm/mach-tegra/ to drivers/pci/host/.

The PCIe driver work depends on the following tag from Thomas Petazzoni:
git://git.infradead.org/linux-mvebu.git mis-3.12.2
... which is merged into the middle of this pull request.

* tag 'tegra-for-3.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (33 commits)
  ARM: tegra: disable LP2 cpuidle state if PCIe is enabled
  MAINTAINERS: Add myself as Tegra PCIe maintainer
  PCI: tegra: set up PADS_REFCLK_CFG1
  PCI: tegra: Add Tegra 30 PCIe support
  PCI: tegra: Move PCIe driver to drivers/pci/host
  PCI: msi: add default MSI operations for !HAVE_GENERIC_HARDIRQS platforms
  ARM: tegra: add LP1 suspend support for Tegra114
  ARM: tegra: add LP1 suspend support for Tegra20
  ARM: tegra: add LP1 suspend support for Tegra30
  ARM: tegra: add common LP1 suspend support
  clk: tegra114: add LP1 suspend/resume support
  ARM: tegra: config the polarity of the request of sys clock
  ARM: tegra: add common resume handling code for LP1 resuming
  ARM: pci: add ->add_bus() and ->remove_bus() hooks to hw_pci
  of: pci: add registry of MSI chips
  PCI: Introduce new MSI chip infrastructure
  PCI: remove ARCH_SUPPORTS_MSI kconfig option
  PCI: use weak functions for MSI arch-specific functions
  ARM: tegra: unify Tegra's Kconfig a bit more
  ARM: tegra: remove the limitation that Tegra114 can't support suspend
  ...

Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-08-21 10:17:18 -07:00
Stephen Warren
b4f173752a ARM: tegra: disable LP2 cpuidle state if PCIe is enabled
Tegra20 HW appears to have a bug such that PCIe device interrupts,
whether they are legacy IRQs or MSI, are lost when LP2 is enabled. To
work around this, simply disable LP2 if any PCIe devices with interrupts
are present. Detect this via the IRQ domain map operation. This is
slightly over-conservative; if a device with an interrupt is present but
the driver does not actually use them, LP2 will still be disabled.
However, this is a reasonable trade-off which enables a simpler
workaround.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
2013-08-13 12:07:56 -06:00
Thierry Reding
d1523b52bf PCI: tegra: Move PCIe driver to drivers/pci/host
Move the PCIe driver from arch/arm/mach-tegra into the drivers/pci/host
directory. The motivation is to collect various host controller drivers
in the same location in order to facilitate refactoring.

The Tegra PCIe driver has been largely rewritten, both in order to turn
it into a proper platform driver and to add MSI (based on code by
Krishna Kishore <kthota@nvidia.com>) as well as device tree support.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
[swarren, split DT changes into a separate patch in another branch]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-13 12:07:45 -06:00
Joseph Lo
e9f624499c ARM: tegra: add LP1 suspend support for Tegra114
The LP1 suspend mode will power off the CPU, clock gated the PLLs and put
SDRAM to self-refresh mode. Any interrupt can wake up device from LP1. The
sequence when LP1 suspending:

* tunning off L1 data cache and the MMU
* storing some EMC registers, DPD (deep power down) status, clk source of
  mselect and SCLK burst policy
* putting SDRAM into self-refresh
* switching CPU to CLK_M (12MHz OSC)
* tunning off PLLM, PLLP, PLLA, PLLC and PLLX
* switching SCLK to CLK_S (32KHz OSC)
* shutting off the CPU rail

The sequence of LP1 resuming:

* re-enabling PLLM, PLLP, PLLA, PLLC and PLLX
* restoring the clk source of mselect and SCLK burst policy
* setting up CCLK burst policy to PLLX
* restoring DPD status and some EMC registers
* resuming SDRAM to normal mode
* jumping to the "tegra_resume" from PMC_SCRATCH41

Due to the SDRAM will be put into self-refresh mode, the low level
procedures of LP1 suspending and resuming should be copied to
TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) when suspending. Before
restoring the CPU context when resuming, the SDRAM needs to be switched
back to normal mode. And the PLLs need to be re-enabled, SCLK burst policy
be restored. Then jumping to "tegra_resume" that was expected to be stored
in PMC_SCRATCH41 to restore CPU context and back to kernel.

Based on the work by: Bo Yan <byan@nvidia.com>

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 13:30:12 -06:00
Joseph Lo
731a927438 ARM: tegra: add LP1 suspend support for Tegra20
The LP1 suspend mode will power off the CPU, clock gated the PLLs and put
SDRAM to self-refresh mode. Any interrupt can wake up device from LP1. The
sequence when LP1 suspending:

* tunning off L1 data cache and the MMU
* putting SDRAM into self-refresh
* storing some EMC registers and SCLK burst policy
* switching CPU to CLK_M (12MHz OSC)
* switching SCLK to CLK_S (32KHz OSC)
* tunning off PLLM, PLLP and PLLC
* shutting off the CPU rail

The sequence of LP1 resuming:

* re-enabling PLLM, PLLP, and PLLC
* restoring some EMC registers and SCLK burst policy
* setting up CCLK burst policy to PLLP
* resuming SDRAM to normal mode
* jumping to the "tegra_resume" from PMC_SCRATCH41

Due to the SDRAM will be put into self-refresh mode, the low level
procedures of LP1 suspending and resuming should be copied to
TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) when suspending. Before
restoring the CPU context when resuming, the SDRAM needs to be switched
back to normal mode. And the PLLs need to be re-enabled, SCLK burst policy
be restored, CCLK burst policy be set in PLLP. Then jumping to
"tegra_resume" that was expected to be stored in PMC_SCRATCH41 to restore
CPU context and back to kernel.

Based on the work by:
Colin Cross <ccross@android.com>
Gary King <gking@nvidia.com>

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 13:30:11 -06:00
Joseph Lo
e7a932b196 ARM: tegra: add LP1 suspend support for Tegra30
The LP1 suspend mode will power off the CPU, clock gated the PLLs and put
SDRAM to self-refresh mode. Any interrupt can wake up device from LP1. The
sequence when LP1 suspending:

* tunning off L1 data cache and the MMU
* storing some EMC registers, DPD (deep power down) status, clk source of
  mselect and SCLK burst policy
* putting SDRAM into self-refresh
* switching CPU to CLK_M (12MHz OSC)
* tunning off PLLM, PLLP, PLLA, PLLC and PLLX
* switching SCLK to CLK_S (32KHz OSC)
* shutting off the CPU rail

The sequence of LP1 resuming:

* re-enabling PLLM, PLLP, PLLA, PLLC and PLLX
* restoring the clk source of mselect and SCLK burst policy
* setting up CCLK burst policy to PLLX
* restoring DPD status and some EMC registers
* resuming SDRAM to normal mode
* jumping to the "tegra_resume" from PMC_SCRATCH41

Due to the SDRAM will be put into self-refresh mode, the low level
procedures of LP1 suspending and resuming should be copied to
TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) when suspending. Before
restoring the CPU context when resuming, the SDRAM needs to be switched
back to normal mode. And the PLLs need to be re-enabled, SCLK burst policy
be restored, CCLK burst policy be set in PLLX. Then jumping to
"tegra_resume" that was expected to be stored in PMC_SCRATCH41 to restore
CPU context and back to kernel.

Based on the work by: Scott Williams <scwilliams@nvidia.com>

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 13:30:11 -06:00
Joseph Lo
95872f427e ARM: tegra: add common LP1 suspend support
The LP1 suspending mode on Tegra means CPU rail off, devices and PLLs are
clock gated and SDRAM in self-refresh mode. That means the low level LP1
suspending and resuming code couldn't be run on DRAM and the CPU must
switch to the always on clock domain (a.k.a. CLK_M 12MHz oscillator). And
the system clock (SCLK) would be switched to CLK_S, a 32KHz oscillator.
The LP1 low level handling code need to be moved to IRAM area first. And
marking the LP1 mask for indicating the Tegra device is in LP1. The CPU
power timer needs to be re-calculated based on 32KHz that was originally
based on PCLK.

When resuming from LP1, the LP1 reset handler will resume PLLs and then
put DRAM to normal mode. Then jumping to the "tegra_resume" that will
restore full context before back to kernel. The "tegra_resume" handler
was expected to be found in PMC_SCRATCH41 register.

This is common LP1 procedures for Tegra, so we do these jobs mainly in
this patch:
* moving LP1 low level handling code to IRAM
* marking LP1 mask
* copying the physical address of "tegra_resume" to PMC_SCRATCH41
* re-calculate the CPU power timer based on 32KHz

Signed-off-by: Joseph Lo <josephl@nvidia.com>
[swarren, replaced IRAM_CODE macro with IO_ADDRESS(TEGRA_IRAM_CODE_AREA)]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 13:29:24 -06:00
Joseph Lo
444f9a8030 ARM: tegra: config the polarity of the request of sys clock
When suspending to LP1 mode, the SYSCLK will be clock gated. And different
board may have different polarity of the request of SYSCLK, this patch
configure the polarity from the DT for the board.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 12:22:39 -06:00
Joseph Lo
5b795d051c ARM: tegra: add common resume handling code for LP1 resuming
Add support to the Tegra CPU reset vector to detect whether the CPU is
resuming from LP1 suspend state. If it is, branch to the LP1-specific
resume code.

When Tegra enters the LP1 suspend state, the SDRAM controller is placed
into a self-refresh state. For this reason, we must place the LP1 resume
code into IRAM, so that it is accessible before SDRAM access has been
re-enabled.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 12:22:38 -06:00
Stephen Warren
20984c44b5 ARM: tegra: unify Tegra's Kconfig a bit more
Move all common select clauses from ARCH_TEGRA_*_SOC to ARCH_TEGRA to
eliminate duplication. The USB-related selects all should have been
common too, but were missing from Tegra114 previously. Move these to
ARCH_TEGRA too. The latter fixes a build break when only Tegra114
support was enabled, but not Tegra20 or Tegra30 support.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-08 11:45:13 -06:00
Tuomas Tynkkynen
5fed682831 ARM: tegra: Remove USB platform data
USB-related platform data is not used anymore in the Tegra USB drivers,
so remove all of it.

Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29 13:58:23 +03:00
Olof Johansson
47dcd3563e Now that we have a generic arch hook for broadcast we can remove the local
timer API entirely. Doing so will reduce code in ARM core, reduce the
 architecture dependencies of our timer drivers, and simplify the code because
 we no longer go through an architecture layer that is essentially a hotplug
 notifier.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABCAAGBQJRydGwAAoJENidgRMleOc9tMMP/Awy0ETkLHQkXdFdRNLQH7Jd
 BpDagzBkpt/U/qsh2Dy5Yhz7Qf/HQg6CwJK/b1apHguSPzNcSov+YS7ArPV+kuDY
 9OCF5wkVqPW7BPHlxJ+2QAjayIFUaBR+35kpiU+hv9Gkhs11oK90iAWxEIDUGzA6
 5miuOVJeyDEwV8des3NYmVVOKziHLJjX3fjMVnc2gxE6PLmOEUQ9t42bVU1aCfub
 pRMUXNuG+aFk8lRExPfs4wWfEKCOHrgJPSE4OPFp3pDJeqhFi5tXTiPBQ22FpNf5
 78fEDeguS0QS6f/3rGKSdGu/Yz5Lmcldv4tOkfzvNaZP7zhE18wKJu6bSCrZ/Onn
 MnhriYWZh+YgX1V8wTMFMPEV+OR+FJdN4C8PhvNWmMC1Xoq25HtrVQUP5aElgAJs
 mLcgTXxLYpvZH3jPxdtMR9IuDc+86qmFerGShWqp/1YaNHwpR8dNZxFyVNfw+FUL
 /GoAjk/6MsJlZUchiF7I8yp4jYyMcXcV8Bi4tgIAf5rJO9PZBpuxtyAL9uVHnL13
 pwkctMnMQwoP6AE9uYfbdnHCKJxF1hny4tKI5sNxAmK8I6bBkfibIZ3sNRAbSrY7
 56kV+tJrrgvgAUDkgdluyS9eFs26iHGPsHK4lmzJzFylWmvWFa8tWpP6G0kCa0wP
 A1XCqUOryLeL8enPV+z2
 =wZbm
 -----END PGP SIGNATURE-----

Merge tag 'remove-local-timers' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/cleanup

From Stephen Boyd:

Now that we have a generic arch hook for broadcast we can remove the
local timer API entirely. Doing so will reduce code in ARM core, reduce
the architecture dependencies of our timer drivers, and simplify the code
because we no longer go through an architecture layer that is essentially
a hotplug notifier.

* tag 'remove-local-timers' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm:
  ARM: smp: Remove local timer API
  clocksource: time-armada-370-xp: Divorce from local timer API
  clocksource: time-armada-370-xp: Fix sparse warning
  ARM: msm: Divorce msm_timer from local timer API
  ARM: PRIMA2: Divorce timer-marco from local timer API
  ARM: EXYNOS4: Divorce mct from local timer API
  ARM: OMAP2+: Divorce from local timer API
  ARM: smp_twd: Divorce smp_twd from local timer API
  ARM: smp: Remove duplicate dummy timer implementation

Resolved a large number of conflicts due to __cpuinit cleanups, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-23 16:54:15 -07:00
Joseph Lo
9c0c4b43b1 ARM: tegra: remove the limitation that Tegra114 can't support suspend
The Tegra114 can support suspend function now, removing the limitation.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 10:08:09 -06:00
Joseph Lo
dd6fe9a927 ARM: tegra: flowctrl: add support for cpu_suspend_enter/exit
The flow controller can help CPU to go into suspend mode (powered-down
state). When CPU goes into powered-down state, it needs some careful
settings before getting into and after leaving. The enter and exit
functions do that by configuring appropriate mode for flow controller.

For Tegra114, the setting is compatible with Tegra30.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 10:08:08 -06:00
Joseph Lo
b573ad9f19 ARM: tegra: hook tegra_tear_down_cpu function
Hooking tegra_tear_down_cpu for Tegra114 for supporting cluster power
down when CPU cluster suspneded in LP2.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 10:08:07 -06:00
Joseph Lo
3f1be81eef ARM: tegra: shut off the CPU rail when the last CPU in suspend
When the last CPU core in suspend, the CPU power rail can be turned off
by setting flags to flow controller. Then the flow controller will inform
PMC to turn off the CPU rail when the last CPU goes into suspend.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 10:08:07 -06:00
Joseph Lo
ccea4bc654 ARM: tegra: add low level code for Tegra114 cluster power down
When the CPU cluster power down, the vGIC is powered down too. The
flow controller needs to monitor the legacy interrupt controller to
wake up CPU. So setting up the appropriate wake up event in flow
controller.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 10:08:06 -06:00
Joseph Lo
2f5aaa3d27 ARM: tegra: set up the correct L2 data RAM latency for Cortex-A15
When there is a cluster power down cycle in suspend, we need to set up
the correct L2 RAM data RAM latency to make L2 cache work correctly. This
is only needed for cluster 0 and needs to be done in tegra_resume before
the cache is enabled.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 10:08:05 -06:00
Joseph Lo
ac2527bfc2 ARM: tegra: add a flag for tegra_disable_clean_inv_dcache to do LoUIS or ALL
Adding a flag for tegra_disable_clean_inv_dcache to flush cache as LoUIS
or ALL. After this patch, the v7_flush_dcache_louis is used for CPU hotplug
and CPU suspend in CPU power down (e.g. CPU idle power-down mode) case. And
the v7_flush_dcache_all is used for CPU cluster power down (e.g. suspend to
LP2 mode).

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 10:08:05 -06:00
Joseph Lo
c04c77540a ARM: tegra: do v7_invalidate_l1 only when CPU is Cortex-A9
The v7_invalidate_l1 was used for the L1 cache that come out from reset
in a undefined state. This is no need for Cortex-A15. We do it for A9
only.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 10:08:04 -06:00
Joseph Lo
3045cb33eb ARM: tegra114: cpuidle: add powered-down state
This supports CPU core power down on each CPU when CPU idle. When CPU go
into this state, it saves it's context and needs a proper configuration
in flow controller to power gate the CPU when CPU runs into WFI
instruction. And the CPU also needs to set the IRQ as CPU power down idle
wake up event in flow controller.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 10:07:14 -06:00
Joseph Lo
1b9e6b2745 ARM: tegra114: add low level support for CPU idle powered-down mode
The flow controller would take care the power sequence when CPU idle in
powered-down mode. It powered gate the CPU when CPU runs into WFI
instruction. And wake up the CPU when event be triggered.

The sequence is below.
* setting wfi bitmap for the CPU as the halt event in the
  FLOW_CTRL_CPU_HALT_REG to monitor the CPU running into WFI,then power
  gate it
* setting IRQ and FIQ as wake up event to wake up CPU when event triggered

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 10:07:14 -06:00
Joseph Lo
7e8b15dbc3 ARM: tegra114: Reprogram GIC CPU interface to bypass IRQ on CPU PM entry
There is a difference between GICv1 and v2 when CPU in power management
mode (aka CPU power down on Tegra). For GICv1, IRQ/FIQ interrupt lines
going to CPU are same lines which are also used for wake-interrupt.
Therefore, we cannot disable the GIC CPU interface if we need to use same
interrupts for CPU wake purpose. This creates a race condition for CPU
power off entry. Also, in GICv1, disabling GICv1 CPU interface puts GICv1
into bypass mode such that incoming legacy IRQ/FIQ are sent to CPU, which
means disabling GIC CPU interface doesn't really disable IRQ/FIQ to CPU.

GICv2 provides a wake IRQ/FIQ (for wake-event purpose), which are not
disabled by GIC CPU interface. This is done by adding a bypass override
capability when the interrupts are disabled at the CPU interface. To
support this, there are four bits about IRQ/FIQ BypassDisable in CPU
interface Control Register. When the IRQ/FIQ not being driver by the
CPU interface, each interrupt output signal can be deasserted rather
than being driven by the legacy interrupt input.

So the wake-event can be used as wakeup signals to SoC (system power
controller).

To prevent race conditions and ensure proper interrupt routing on
Cortex-A15 CPUs when they are power-gated, add a CPU PM notifier
call-back to reprogram the GIC CPU interface on PM entry. The
GIC CPU interface will be reset back to its normal state by
the common GIC CPU PM exit callback when the CPU wakes up.

Based on the work by: Scott Williams <scwilliams@nvidia.com>

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 10:07:14 -06:00
Joseph Lo
a99d34b506 Revert "ARM: tegra: add cpu_disable for hotplug"
This reverts commit 510bb59 "ARM: tegra: add cpu_disable for hotplug".

The Tegra114 support CPU0 hotplug function in HW physically, but it needs
other software to make it work normally after we add CPU idle power down
mode support. So remove them for now.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-19 10:00:37 -06:00
Joseph Lo
f2bd77c8f3 ARM: tegra: enable Cortex-A15 erratum 798181
The commit 93dc688 (ARM: 7684/1: errata: Workaround for Cortex-A15
erratum 798181 (TLBI/DSB operations)) introduced a workaround for
Cortex-A15 erratum 798181. Enable it for Tegra114.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-15 12:21:01 -06:00
Paul Gortmaker
8bd26e3a7e arm: delete __cpuinit/__CPUINIT usage from all ARM users
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
and are flagged as __cpuinit  -- so if we remove the __cpuinit from
the arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
related content into no-ops as early as possible, since that will get
rid of these warnings.  In any case, they are temporary and harmless.

This removes all the ARM uses of the __cpuinit macros from C code,
and all __CPUINIT from assembly code.  It also had two ".previous"
section statements that were paired off against __CPUINIT
(aka .section ".cpuinit.text") that also get removed here.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-14 19:36:52 -04:00
Robin Holt
7b6d864b48 reboot: arm: change reboot_mode to use enum reboot_mode
Preparing to move the parsing of reboot= to generic kernel code forces
the change in reboot_mode handling to use the enum.

[akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c]
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:29 -07:00
Linus Torvalds
f991fae5c6 Power management and ACPI updates for 3.11-rc1
- Hotplug changes allowing device hot-removal operations to fail
   gracefully (instead of crashing the kernel) if they cannot be
   carried out completely.  From Rafael J Wysocki and Toshi Kani.
 
 - Freezer update from Colin Cross and Mandeep Singh Baines targeted
   at making the freezing of tasks a bit less heavy weight operation.
 
 - cpufreq resume fix from Srivatsa S Bhat for a regression introduced
   during the 3.10 cycle causing some cpufreq sysfs attributes to
   return wrong values to user space after resume.
 
 - New freqdomain_cpus sysfs attribute for the acpi-cpufreq driver to
   provide information previously available via related_cpus from
   Lan Tianyu.
 
 - cpufreq fixes and cleanups from Viresh Kumar, Jacob Shin,
   Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia, Arnd Bergmann, and
   Tang Yuantian.
 
 - Fix for an ACPICA regression causing suspend/resume issues to
   appear on some systems introduced during the 3.4 development cycle
   from Lv Zheng.
 
 - ACPICA fixes and cleanups from Bob Moore, Tomasz Nowicki, Lv Zheng,
   Chao Guan, and Zhang Rui.
 
 - New cupidle driver for Xilinx Zynq processors from Michal Simek.
 
 - cpuidle fixes and cleanups from Daniel Lezcano.
 
 - Changes to make suspend/resume work correctly in Xen guests from
   Konrad Rzeszutek Wilk.
 
 - ACPI device power management fixes and cleanups from Fengguang Wu
   and Rafael J Wysocki.
 
 - ACPI documentation updates from Lv Zheng, Aaron Lu and Hanjun Guo.
 
 - Fix for the IA-64 issue that was the reason for reverting commit
   9f29ab1 and updates of the ACPI scan code from Rafael J Wysocki.
 
 - Mechanism for adding CMOS RTC address space handlers from Lan Tianyu
   (to allow some EC-related breakage to be fixed on some systems).
 
 - Spec-compliant implementation of acpi_os_get_timer() from
   Mika Westerberg.
 
 - Modification of do_acpi_find_child() to execute _STA in order to
   to avoid situations in which a pointer to a disabled device object
   is returned instead of an enabled one with the same _ADR value.
   From Jeff Wu.
 
 - Intel BayTrail PCH (Platform Controller Hub) support for the ACPI
   Intel Low-Power Subsystems (LPSS) driver and modificaions of that
   driver to work around a couple of known BIOS issues from
   Mika Westerberg and Heikki Krogerus.
 
 - EC driver fix from Vasiliy Kulikov to make it use get_user() and
   put_user() instead of dereferencing user space pointers blindly.
 
 - Assorted ACPI code cleanups from Bjorn Helgaas, Nicholas Mazzuca and
   Toshi Kani.
 
 - Modification of the "runtime idle" helper routine to take the return
   values of the callbacks executed by it into account and to call
   rpm_suspend() if they return 0, which allows some code bloat
   reduction to be done, from Rafael J Wysocki and Alan Stern.
 
 - New trace points for PM QoS from Sahara <keun-o.park@windriver.com>.
 
 - PM QoS documentation update from Lan Tianyu.
 
 - Assorted core PM code cleanups and changes from Bernie Thompson,
   Bjorn Helgaas, Julius Werner, and Shuah Khan.
 
 - New devfreq driver for the Exynos5-bus device from Abhilash Kesavan.
 
 - Minor devfreq cleanups, fixes and MAINTAINERS update from
   MyungJoo Ham, Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and
   Wei Yongjun.
 
 - OMAP Adaptive Voltage Scaling (AVS) SmartReflex voltage control
   driver updates from Andrii Tseglytskyi and Nishanth Menon.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0ZNOAAoJEKhOf7ml8uNsDLYP/0EU4rmvw0TWTITfp6RS1KDE
 9GwBn96ZR4Q5bJd9gBCTPSqhHOYMqxWEUp99sn/M2wehG1pk/jw5LO56+2IhM3UZ
 g1HDcJ7te2nVT/iXsKiAGTVhU9Rk0aYwoVSknwk27qpIBGxW9w/s5tLX8pY3Q3Zq
 wL/7aTPjyL+PFFFEaxgH7qLqsl3DhbtYW5AriUBTkXout/tJ4eO1b7MNBncLDh8X
 VQ/0DNCKE95VEJfkO4rk9RKUyVp9GDn0i+HXCD/FS4IA5oYzePdVdNDmXf7g+swe
 CGlTZq8pB+oBpDiHl4lxzbNrKQjRNbGnDUkoRcWqn0nAw56xK+vmYnWJhW99gQ/I
 fKnvxeLca5po1aiqmC4VSJxZIatFZqLrZAI4dzoCLWY+bGeTnCKmj0/F8ytFnZA2
 8IuLLs7/dFOaHXV/pKmpg6FAlFa9CPxoqRFoyqb4M0GjEarADyalXUWsPtG+6xCp
 R/p0CISpwk+guKZR/qPhL7M654S7SHrPwd2DPF0KgGsvk+G2GhoB8EzvD8BVp98Z
 9siCGCdgKQfJQVI6R0k9aFmn/4gRQIAgyPhkhv9tqULUUkiaXki+/t8kPfnb8O/d
 zep+CA57E2G8MYLkDJfpFeKS7GpPD6TIdgFdGmOUC0Y6sl9iTdiw4yTx8O2JM37z
 rHBZfYGkJBrbGRu+Q1gs
 =VBBq
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "This time the total number of ACPI commits is slightly greater than
  the number of cpufreq commits, but Viresh Kumar (who works on cpufreq)
  remains the most active patch submitter.

  To me, the most significant change is the addition of offline/online
  device operations to the driver core (with the Greg's blessing) and
  the related modifications of the ACPI core hotplug code.  Next are the
  freezer updates from Colin Cross that should make the freezing of
  tasks a bit less heavy weight.

  We also have a couple of regression fixes, a number of fixes for
  issues that have not been identified as regressions, two new drivers
  and a bunch of cleanups all over.

  Highlights:

   - Hotplug changes to support graceful hot-removal failures.

     It sometimes is necessary to fail device hot-removal operations
     gracefully if they cannot be carried out completely.  For example,
     if memory from a memory module being hot-removed has been allocated
     for the kernel's own use and cannot be moved elsewhere, it's
     desirable to fail the hot-removal operation in a graceful way
     rather than to crash the kernel, but currenty a success or a kernel
     crash are the only possible outcomes of an attempted memory
     hot-removal.  Needless to say, that is not a very attractive
     alternative and it had to be addressed.

     However, in order to make it work for memory, I first had to make
     it work for CPUs and for this purpose I needed to modify the ACPI
     processor driver.  It's been split into two parts, a resident one
     handling the low-level initialization/cleanup and a modular one
     playing the actual driver's role (but it binds to the CPU system
     device objects rather than to the ACPI device objects representing
     processors).  That's been sort of like a live brain surgery on a
     patient who's riding a bike.

     So this is a little scary, but since we found and fixed a couple of
     regressions it caused to happen during the early linux-next testing
     (a month ago), nobody has complained.

     As a bonus we remove some duplicated ACPI hotplug code, because the
     ACPI-based CPU hotplug is now going to use the common ACPI hotplug
     code.

   - Lighter weight freezing of tasks.

     These changes from Colin Cross and Mandeep Singh Baines are
     targeted at making the freezing of tasks a bit less heavy weight
     operation.  They reduce the number of tasks woken up every time
     during the freezing, by using the observation that the freezer
     simply doesn't need to wake up some of them and wait for them all
     to call refrigerator().  The time needed for the freezer to decide
     to report a failure is reduced too.

     Also reintroduced is the check causing a lockdep warining to
     trigger when try_to_freeze() is called with locks held (which is
     generally unsafe and shouldn't happen).

   - cpufreq updates

     First off, a commit from Srivatsa S Bhat fixes a resume regression
     introduced during the 3.10 cycle causing some cpufreq sysfs
     attributes to return wrong values to user space after resume.  The
     fix is kind of fresh, but also it's pretty obvious once Srivatsa
     has identified the root cause.

     Second, we have a new freqdomain_cpus sysfs attribute for the
     acpi-cpufreq driver to provide information previously available via
     related_cpus.  From Lan Tianyu.

     Finally, we fix a number of issues, mostly related to the
     CPUFREQ_POSTCHANGE notifier and cpufreq Kconfig options and clean
     up some code.  The majority of changes from Viresh Kumar with bits
     from Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia,
     Arnd Bergmann, and Tang Yuantian.

   - ACPICA update

     A usual bunch of updates from the ACPICA upstream.

     During the 3.4 cycle we introduced support for ACPI 5 extended
     sleep registers, but they are only supposed to be used if the
     HW-reduced mode bit is set in the FADT flags and the code attempted
     to use them without checking that bit.  That caused suspend/resume
     regressions to happen on some systems.  Fix from Lv Zheng causes
     those registers to be used only if the HW-reduced mode bit is set.

     Apart from this some other ACPICA bugs are fixed and code cleanups
     are made by Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and
     Zhang Rui.

   - cpuidle updates

     New driver for Xilinx Zynq processors is added by Michal Simek.

     Multidriver support simplification, addition of some missing
     kerneldoc comments and Kconfig-related fixes come from Daniel
     Lezcano.

   - ACPI power management updates

     Changes to make suspend/resume work correctly in Xen guests from
     Konrad Rzeszutek Wilk, sparse warning fix from Fengguang Wu and
     cleanups and fixes of the ACPI device power state selection
     routine.

   - ACPI documentation updates

     Some previously missing pieces of ACPI documentation are added by
     Lv Zheng and Aaron Lu (hopefully, that will help people to
     uderstand how the ACPI subsystem works) and one outdated doc is
     updated by Hanjun Guo.

   - Assorted ACPI updates

     We finally nailed down the IA-64 issue that was the reason for
     reverting commit 9f29ab11dd ("ACPI / scan: do not match drivers
     against objects having scan handlers"), so we can fix it and move
     the ACPI scan handler check added to the ACPI video driver back to
     the core.

     A mechanism for adding CMOS RTC address space handlers is
     introduced by Lan Tianyu to allow some EC-related breakage to be
     fixed on some systems.

     A spec-compliant implementation of acpi_os_get_timer() is added by
     Mika Westerberg.

     The evaluation of _STA is added to do_acpi_find_child() to avoid
     situations in which a pointer to a disabled device object is
     returned instead of an enabled one with the same _ADR value.  From
     Jeff Wu.

     Intel BayTrail PCH (Platform Controller Hub) support is added to
     the ACPI driver for Intel Low-Power Subsystems (LPSS) and that
     driver is modified to work around a couple of known BIOS issues.
     Changes from Mika Westerberg and Heikki Krogerus.

     The EC driver is fixed by Vasiliy Kulikov to use get_user() and
     put_user() instead of dereferencing user space pointers blindly.

     Code cleanups are made by Bjorn Helgaas, Nicholas Mazzuca and Toshi
     Kani.

   - Assorted power management updates

     The "runtime idle" helper routine is changed to take the return
     values of the callbacks executed by it into account and to call
     rpm_suspend() if they return 0, which allows us to reduce the
     overall code bloat a bit (by dropping some code that's not
     necessary any more after that modification).

     The runtime PM documentation is updated by Alan Stern (to reflect
     the "runtime idle" behavior change).

     New trace points for PM QoS are added by Sahara
     (<keun-o.park@windriver.com>).

     PM QoS documentation is updated by Lan Tianyu.

     Code cleanups are made and minor issues are addressed by Bernie
     Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan.

   - devfreq updates

     New driver for the Exynos5-bus device from Abhilash Kesavan.

     Minor cleanups, fixes and MAINTAINERS update from MyungJoo Ham,
     Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun.

   - OMAP power management updates

     Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver
     updates from Andrii Tseglytskyi and Nishanth Menon."

* tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits)
  cpufreq: Fix cpufreq regression after suspend/resume
  ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state()
  PM / Sleep: Warn about system time after resume with pm_trace
  cpufreq: don't leave stale policy pointer in cdbs->cur_policy
  acpi-cpufreq: Add new sysfs attribute freqdomain_cpus
  cpufreq: make sure frequency transitions are serialized
  ACPI: implement acpi_os_get_timer() according the spec
  ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan
  ACPI: Add CMOS RTC Operation Region handler support
  ACPI / processor: Drop unused variable from processor_perflib.c
  cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases
  ...
2013-07-03 14:35:40 -07:00
Linus Torvalds
92295f632c The common clock framework changes for 3.11 include new clock drivers
across several different platforms and architectures, fixes to existing
 drivers, a MAINTAINERS file fix and improvements to the basic clock
 types that allow them to be of use to more platforms than before. Only a
 few fixes to the core framework are included with most all of the
 changes landing in the various clock drivers themselves.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0hFpAAoJEDqPOy9afJhJcr4P/iA83uEGXIncUzFsbCIsKNGl
 g8yoasz1mpcAng31kK54lasNpFvUYIEBLKWkJBN56h2J5gJ3OKpi7basnQGRykjh
 +rCg2dV4gKDBQzypdeg5kPxf0YLJ8KrwyngcRm5KA3oxKYtmLHt/M2jmDd3DXP0h
 dKo2bkR52eQ7E+ij6/MWgUObxWiFnH0C5Lf+L0tGHsRlRvZTV6NMymX2v0sIOCw9
 hpsrL+7Hqf/+PBfWBljH0IAiI72I5dGEaJoesdTRWz8qut+duwF+OGlzMZnkclMf
 XU444HnvCq3bWGP5NYf9ASO4RRA2IGEoN/eDeiVX5hvkAjeUNHVNhkcUk28Xn9vI
 ZxCxwBXki4wGayiQm4TTgORozmp4i+NwbOuG+s3For1qQU43aA7ppwysFHGXngQa
 bxXT2pNECLX8WR91vkmEdqeQVm6s++R3zltHFUry1VRjTIs5y18Dt9kR6T16NKKQ
 ztoegeQQ8SI7HOLd+tR2v19VXH4zoV3NYAdkCKJX+VXFg+4mgJERmXoU350V3d8D
 wxde7WU4KLO4+1Fngror8wocP8jRRHfhx5jbBVVJ5n6BnF/Mos24g7KI1VPis3Wr
 XZQibxLW0kZ7/hTHykZCff8D4aNqR4fT/UCKyy2Xw1aR0zkD9ZAQq5oWhL99lsnt
 cCe9GBP0Lum9Zq9jjMwL
 =SwMB
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus-3.11' of git://git.linaro.org/people/mturquette/linux

Pull clock framework updates from Mike Turquette:
 "The common clock framework changes for 3.11 include new clock drivers
  across several different platforms and architectures, fixes to
  existing drivers, a MAINTAINERS file fix and improvements to the basic
  clock types that allow them to be of use to more platforms than before.

  Only a few fixes to the core framework are included with most all of
  the changes landing in the various clock drivers themselves."

* tag 'clk-for-linus-3.11' of git://git.linaro.org/people/mturquette/linux: (55 commits)
  clk: tegra: fix ifdef for tegra_periph_reset_assert inline
  clk: tegra: provide tegra_periph_reset_assert alternative
  clk: exynos4: Fix clock aliases for cpufreq related clocks
  clk: samsung: Add MUX_FA macro to pass flag and alias
  clk: add support for Rockchip gate clocks
  clk: vexpress: Make the clock drivers directly available for arm64
  clk: vexpress: Use full node name to identify individual clocks
  clk: tegra: T114: add DFLL DVCO reset control
  clk: tegra: T114: add DFLL source clocks
  clk: tegra: T114: add FCPU clock shaper programming, needed by the DFLL
  clk: gate: add CLK_GATE_HIWORD_MASK
  clk: divider: add CLK_DIVIDER_HIWORD_MASK flag
  clk: mux: add CLK_MUX_HIWORD_MASK
  clk: Always notify whole subtree when reparenting
  MAINTAINERS: make drivers/clk entry match subdirs
  clk: honor CLK_GET_RATE_NOCACHE in clk_set_rate
  clk: use clk_get_rate() for debugfs
  clk: tegra: Use override bits when needed
  clk: tegra: override bits for Tegra30 PLLM
  clk: tegra: override bits for Tegra114 PLLM
  ...
2013-07-03 11:54:50 -07:00
Linus Torvalds
fb2af0020a Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM updates from Russell King:
 "This contains the usual updates from other people (listed below) and
  the usual random muddle of miscellaneous ARM updates which cover some
  low priority bug fixes and performance improvements.

  I've started to put the pull request wording into the merge commits,
  which are:

   - NoMMU stuff:

     This includes the following series sent earlier to the list:
      - nommu-fixes
      - R7 Support
      - MPU support

     I've left out the ARCH_MULTIPLATFORM/!MMU stuff that Arnd and I
     were discussing today until we've reached a conclusion/that's had
     some more review.

     This is rebased (and re-tested) on your devel-stable branch because
     otherwise there were going to be conflicts with Uwe's V7M work now
     that you've merged that.  I've included the fix for limiting MPU to
     CPU_V7.

   - Huge page support

     These changes bring both HugeTLB support and Transparent HugePage
     (THP) support to ARM.  Only long descriptors (LPAE) are supported
     in this series.

     The code has been tested on an Arndale board (Exynos 5250).

   - LPAE updates

     Please pull these miscellaneous LPAE fixes I've been collecting for
     a while now for 3.11.  They've been tested and reviewed by quite a
     few people, and most of the patches are pretty trivial.  -- Will Deacon.

   - arch_timer cleanups

     Please pull these arch_timer cleanups I've been holding onto for a
     while.  They're the same as my last posting, but have been rebased
     to v3.10-rc3.

   - mpidr linearisation (multiprocessor id register - identifies which
     CPU number we are in the system)

     This patch series that implements MPIDR linearization through a
     simple hashing algorithm and updates current cpu_{suspend}/{resume}
     code to use the newly created hash structures to retrieve context
     pointers.  It represents a stepping stone for the implementation of
     power management code on forthcoming multi-cluster ARM systems.

     It has been tested on TC2 (dual cluster A15xA7 system), iMX6q,
     OMAP4 and Tegra, with processors hitting low-power states requiring
     warm-boot resume through the cpu_resume code path"

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits)
  ARM: 7775/1: mm: Remove do_sect_fault from LPAE code
  ARM: 7777/1: Avoid extra calls to the C compiler
  ARM: 7774/1: Fix dtb dependency to use order-only prerequisites
  ARM: 7770/1: remove residual ARMv2 support from decompressor
  ARM: 7769/1: Cortex-A15: fix erratum 798181 implementation
  ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator
  ARM: 7767/1: let the ASID allocator handle suspended animation
  ARM: 7766/1: versatile: don't mark pen as __INIT
  ARM: 7765/1: perf: Record the user-mode PC in the call chain.
  ARM: 7735/2: Preserve the user r/w register TPIDRURW on context switch and fork
  ARM: kernel: implement stack pointer save array through MPIDR hashing
  ARM: kernel: build MPIDR hash function data structure
  ARM: mpu: Ensure that MPU depends on CPU_V7
  ARM: mpu: protect the vectors page with an MPU region
  ARM: mpu: Allow enabling of the MPU via kconfig
  ARM: 7758/1: introduce config HAS_BANDGAP
  ARM: 7757/1: mm: don't flush icache in switch_mm with hardware broadcasting
  ARM: 7751/1: zImage: don't overwrite ourself with a page table
  ARM: 7749/1: spinlock: retry trylock operation if strex fails on free lock
  ARM: 7748/1: oabi: handle faults when loading swi instruction from userspace
  ...
2013-07-03 09:46:29 -07:00
Linus Torvalds
3883cbb6c1 ARM SoC specific changes
These changes are all to SoC-specific code, a total of 33 branches on
 17 platforms were pulled into this. Like last time, Renesas sh-mobile
 is now the platform with the most changes, followed by OMAP and EXYNOS.
 
 Two new platforms, TI Keystone and Rockchips RK3xxx are added in
 this branch, both containing almost no platform specific code at all,
 since they are using generic subsystem interfaces for clocks, pinctrl,
 interrupts etc. The device drivers are getting merged through the
 respective subsystem maintainer trees.
 
 One more SoC (u300) is now multiplatform capable and several others
 (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
 towards that goal with this series but need more work.
 
 Also noteworthy is the work on PCI here, which is traditionally part of
 the SoC specific code. With the changes done by Thomas Petazzoni, we can
 now more easily have PCI host controller drivers as loadable modules and
 keep them separate from the platform code in drivers/pci/host. This has
 already led to the discovery that three platforms (exynos, spear and imx)
 are actually using an identical PCIe host controller and will be able
 to share a driver once support for spear and imx is added.
 
 Conflicts:
 * asm/glue-proc.h has one CPU type getting added that conflicts
   with another addition in 3.10-rc7
 * Simple context changes in arch/arm/Makefile and arch/arm/Kconfig
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUdLnpmCrR//JCVInAQLoFRAAyatR+MhVFwc91cO7yDw/mz81RO1V9jEd
 QMufoWi0BRfBsubqxnGlb510EEMTz7gxdrlYPILYNr8TqR+lNGhjKt2FQAjN3q2O
 IBvu4x8C+xcxnMNbkCnTQRxP/ziK6yCI6e7enQhwuMuJwvsnJtGbsqKi5ODMw6x0
 o5EQmIdj5NhhSJqJZPCmWsKbx100TH1UwaEnhNl0DSaFj51n3bVRrK6Nxce10GWZ
 HsS1/a63lq/YZLkwfUEvgin/PU9Jx5jMmqhlp3bZjG+f1ItdzJF+9IgS248vCIi2
 ystzWCH88Kh69UFcYFfCjeZe8H45XcP+Zykd8WC0DvF/a7Hwk5KTKE/ciT6RPRxb
 rkWW5EwjqZL9w9cU3rUHWtSVenayQMMEmCfksadr1AExyCrhPqfs9RINyBs2lK5a
 q2bdSFbXZsNzSyL+3yQAfChvRo1/2FdlFVQy+oVUCActV7L77Y7y6jl+b2qzFsSu
 xMKwvC/1vDXTvOnGk6A/qJu7yrHpqJrvw1eI+wnMswNBl7lCTgyyHnr5y8S092jI
 KU4hmSxsYP+y13HmKy4ewPy9DYJYBTSdReKfEFo79Dx8eqySAWjHFL/OPRqhCUYS
 kBq0eZpVZO7tJnHRaRz8n93wIYzb1UOhhgVwxdjPZF9L4d/jzh1BCv0OBWv8IXCu
 uWLAi92lL24=
 =0r9S
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC specific changes from Arnd Bergmann:
 "These changes are all to SoC-specific code, a total of 33 branches on
  17 platforms were pulled into this.  Like last time, Renesas sh-mobile
  is now the platform with the most changes, followed by OMAP and
  EXYNOS.

  Two new platforms, TI Keystone and Rockchips RK3xxx are added in this
  branch, both containing almost no platform specific code at all, since
  they are using generic subsystem interfaces for clocks, pinctrl,
  interrupts etc.  The device drivers are getting merged through the
  respective subsystem maintainer trees.

  One more SoC (u300) is now multiplatform capable and several others
  (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
  towards that goal with this series but need more work.

  Also noteworthy is the work on PCI here, which is traditionally part
  of the SoC specific code.  With the changes done by Thomas Petazzoni,
  we can now more easily have PCI host controller drivers as loadable
  modules and keep them separate from the platform code in
  drivers/pci/host.  This has already led to the discovery that three
  platforms (exynos, spear and imx) are actually using an identical PCIe
  host controller and will be able to share a driver once support for
  spear and imx is added."

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits)
  ARM: integrator: let pciv3 use mem/premem from device tree
  ARM: integrator: set local side PCI addresses right
  ARM: dts: Add pcie controller node for exynos5440-ssdk5440
  ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC
  ARM: EXYNOS: Enable PCIe support for Exynos5440
  pci: Add PCIe driver for Samsung Exynos
  ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
  ARM: keystone: Move CPU bringup code to dedicated asm file
  ARM: multiplatform: always pick one CPU type
  ARM: imx: select syscon for IMX6SL
  ARM: keystone: select ARM_ERRATA_798181 only for SMP
  ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1
  ARM: OMAP2+: AM43x: resolve SMP related build error
  dmaengine: edma: enable build for AM33XX
  ARM: edma: Add EDMA crossbar event mux support
  ARM: edma: Add DT and runtime PM support to the private EDMA API
  dmaengine: edma: Add TI EDMA device tree binding
  arm: add basic support for Rockchip RK3066a boards
  arm: add debug uarts for rockchip rk29xx and rk3xxx series
  arm: Add basic clocks for Rockchip rk3066a SoCs
  ...
2013-07-02 13:43:38 -07:00
Stephen Warren
1d54e0895b ARM: tegra: fix section mismatch in tegra_pmc_parse_dt
tegra_pmc_parse_dt() references __initconst data. Fix it to be __init.
This matches its only usage; a call from tegra_pmc_init() which is
already __init. This fixes:

WARNING: vmlinux.o(.text.unlikely+0x580): Section mismatch in reference
from the function tegra_pmc_parse_dt() to the (unknown reference)
.init.rodata:(unknown)

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25 11:16:15 -07:00
Stephen Boyd
a894fcc2d0 ARM: smp_twd: Divorce smp_twd from local timer API
Separate the smp_twd timers from the local timer API. This will
allow us to remove ARM local timer support in the near future and
gets us closer to moving this driver to drivers/clocksource.

Tested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2013-06-24 17:45:58 -07:00
Viresh Kumar
dbb8d76e5e cpufreq: tegra: create CONFIG_ARM_TEGRA_CPUFREQ
currently Tegra cpufreq driver gets built based on ARCH_TEGRA, which doesn't
depend on nor select CPU_FREQ itself, so:

        select CPU_FREQ_TABLE if CPU_FREQ

... isn't guaranteed to fire.

The correct solution seems to be:

* Add CONFIG_ARM_TEGRA_CPUFREQ to drivers/cpufreq/Kconfig.arm.
* Make that Kconfig option selct CPU_FREQ_TABLE.
* Make that Kconfig option be def_bool ARCH_TEGRA.
* Modify drivers/cpufreq/Makefile to build tegra-cpufreq.c based on that.
* Remove all the cpufreq-related stuff from arch/arm/mach-tegra/Kconfig.

That way, tegra-cpufreq.c can't be built if !CPU_FREQ, and Tegra's
cpufreq works the same way as all the other cpufreq drivers.

This patch does it.

Suggested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-06-18 13:53:11 +05:30
Olof Johansson
7bf1541225 ARM: tegra: core SoC support enhancements
This branch contains fixes and enhancement for core Tegra Soc support:
 * CPU hotplug support for Tegra114.
 * Some preliminary work on Tegra114 CPU sleep modes.
 * Minor fix for EMC table DT parsing.
 
 This branch is based on v3.10-rc1.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRu0QvAAoJEMzrak5tbycx/HcP/2TJLW7POi9J1oaSFRbe0dZY
 JowaiIVv6Bd9EyIisp6vMECVqNeOUbx1aZx/GRnQ8pjOCZnmf4WZO7RyUmJW7B+j
 gzaIqYECkVVXDJR6YVwXeB3ajRDl4FGTDysD5zLlOZfaKAGwPWgEDDqP5TZVTIBU
 qp3E9ImEVf7EZCvrlvC9m81LpYqQ+zx77hsPqoP8d/7v1K+2poiAI+BK7Zl5EUsQ
 uQVEe3q9zaY2adFNz8yhIBqhVIQt5XC9sTOGAlCtxA8IcSu43LPnEMi5G5CAJSzQ
 YeP/xiC6ZVfM6GjE8kDGKyfy6jm8GXHkd4+xLxP3oFu+WtaMkZ3LsKSRE6zwuPGp
 pCaAZjedgv3+DG6hDSs8NBnDa67jbYZQMw5RQquDK3rEsslWBDewDobJ7tyn9zXl
 QCSxLUNg3yt8Qhc+HJR9LSkMb9MifLvBwo0D0RXgQ89vcJWWpIJ8u+a+cTTksSR/
 4xehmeQdIfOE/AWsutLm6UUvv0dA8PBLn3guM91E1ErnlpjUYZYXb2jKDu45K8Ba
 uiQAr3j1jIbW58fOuKIYpGaMO78Pv2Y11sCaxwoTwpDzCsffVIsRx6YgrncP8SiY
 mz40TDK7GExTvMLbwty3XnQhLNsQBO13hBZeMa/ZlZkIIBvlZXgg25SS6pHK+xVC
 R3xCWuQ8j+j1zr41KMus
 =osxB
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc

From Stephen Warren:
ARM: tegra: core SoC support enhancements

This branch contains fixes and enhancement for core Tegra Soc support:
* CPU hotplug support for Tegra114.
* Some preliminary work on Tegra114 CPU sleep modes.
* Minor fix for EMC table DT parsing.

* tag 'tegra-for-3.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: tegra: don't pass CPU ID to tegra_{set,clear}_cpu_in_lp2
  ARM: tegra: cpuidle: using IS_ENABLED for multi SoCs management in init func
  ARM: tegra: hook tegra_tear_down_cpu function in the PM suspend init function
  ARM: tegra: cpuidle: move the init function behind the suspend init function
  ARM: tegra: remove ifdef in the tegra_resume
  ARM: tegra: add cpu_disable for hotplug
  ARM: tegra114: add CPU hotplug support
  clk: tegra114: implement wait_for_reset and disable_clock for tegra_cpu_car_ops
  ARM: tegra114: add power up sequence for warm boot CPU
  ARM: tegra: make tegra_resume can work for Tegra114
  ARM: tegra: skip SCU and PL310 code when CPU is not Cortex-A9
  ARM: tegra: add an assembly marco to check Tegra SoC ID
  ARM: tegra: emc: correction of ram-code parsing from dt

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-14 18:11:31 -07:00
Mark Rutland
fb521a0da1 arm: fix up ARM_ARCH_TIMER selects
In 8a4da6e: "arm: arch_timer: move core to drivers/clocksource", the
selection of ARM_ARCH_TIMER was indirected via HAVE_ARM_ARCH_TIMER,
though mach-exynos's selection of ARM_ARCH_TIMER was missed, and since
then mach-shmobile, mach-tegra, and mach-virt have begun selecting
ARM_ARCH_TIMER. This can lead to architected timer support erroneously
appearing to not be selected in menuconfig.

This patch fixes up the Kconfigs for those platforms to select
HAVE_ARM_ARCH_TIMER.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
2013-06-07 10:20:28 +01:00
Joseph Lo
8f6a0b6528 ARM: tegra: don't pass CPU ID to tegra_{set,clear}_cpu_in_lp2
tegra_{set,clear}_cpu_in_lp2 can easily determine which CPU ID they are
running on; there is no need to pass the CPU ID into those functions.
So, remove their CPU ID function parameter.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-06-05 11:44:58 -06:00
Joseph Lo
b046a65f23 ARM: tegra: cpuidle: using IS_ENABLED for multi SoCs management in init func
Clean up the Tegra CPUidle init function by using IS_ENABLED for multi
SoCs management in the init function.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-06-05 11:44:54 -06:00
Joseph Lo
bf91add4a0 ARM: tegra: hook tegra_tear_down_cpu function in the PM suspend init function
The tegra_tear_down_cpu was used to cut off the CPU rail for various Tegra
SoCs. Hooking it in the PM suspend init function and making the CPUidle
driver more generic.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-06-05 11:44:54 -06:00