We have plenty of global registers and whatnot programmed without
any further locking by the modeset code. Currently non-bocking
modesets are allowed to execute in parallel which could corrupt
said registers.
To avoid the problem let's run all non-blocking modesets on an
ordered workqueue. We still put page flips etc. to system_unbound_wq
allowing page flips on one pipe to execute in parallel with page flips
or a modeset on a another pipe (assuming no known state is shared
between them, at which point they would have been added to the same
atomic commit and serialized that way).
Blocking modesets are already serialized with each other by
connection_mutex, and thus are safe. To serialize them with
non-blocking modesets we just flush the workqueue before executing
blocking modesets.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 94f050246b ("drm/i915: nonblocking commit")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113133622.8593-1-ville.syrjala@linux.intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Gen9+ need to disable GMBUS clock gating when doing multi part
transfers. Otherwise clock gating will kick in when GMBUS is in
the WAIT state and presumably that will corrupt the transfer.
This is documented as Display WA #0868.
Apparently older hardware doesn't allow clock gating in the WAIT
state and thus are unaffected by this problem.
v2: Limit the PCH w/a to gen9 and gen10 only (DK)
Actually change it to check the PCH type instead since
it's the PCH that actually contains the GMBUS hardware
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20171221202432.17373-1-ville.syrjala@linux.intel.com
Our QA reported a problem caused by movntdqa instructions. Currently,
the KVM hypervisor doesn't support VEX-prefix instructions emulation.
If users passthrough a GPU to guest with vfio option 'x-no-mmap=on',
then all access to the BARs will be trapped and emulated. The KVM
hypervisor would raise an inertal error to qemu which cause the guest
killed. (Since 'movntdqa' ins is not supported.)
This patch try not to enable movntdqa optimization if the driver is
running in hypervisor guest.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1513924309-3113-1-git-send-email-changbin.du@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
During initialization of the runtime part of the intel_device_info
we are dumping that part using DRM_DEBUG_DRIVER mechanism.
As we already have pretty printer for const part of the info,
make similar function for the runtime part and use it separately.
v2: add runtime dump to debugfs (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221185334.17396-7-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221215735.30314-6-chris@chris-wilson.co.uk
We already have dedicated file for opregion related code, dedicated
header will make our life easier.
v2: reorder includes (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221185334.17396-4-michal.wajdeczko@intel.com
[ickle: quieten checkpatch]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221215735.30314-3-chris@chris-wilson.co.uk
It's a bit confusing that page write protect handler is live in
mmio emulation handler. This moves it to stand alone gvt ops.
Also remove unnecessary check of write protected page access
in mmio read handler and cleanup handling of failsafe case.
v2: rebase
Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We had previous hack that tried to accept either i915_reg_t or offset
value to access vGPU virtual/shadow regs which broke that purpose to
be type safe in context. This one trys to explicitly separate the usage
of typed mmio reg with real offset.
Old vgpu_vreg(offset) helper is used only for offset now with new
vgpu_vreg_t(reg) is used for i915_reg_t only. Convert left usage
of that to new helper.
Also fixed left KASAN warning issues caused by previous hack.
v2: rebase, fixup against recent mmio switch change
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
observed igt drv_module_reload test case failure on 4.15.0
rc2 kernel with panic due to no active pipe available.
the gpu will reset during unload/load and make pipe config reg
lost which can cause kernel panic issue happen.
this patch is to move pipe enabling to emulate_mointor_status_chagne
to handle vgpu reset case as well.
Fixes: 7e60590208 ("drm/i915/gvt: enabled pipe A default on creating vgpu")
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
(cherry picked from commit f5f00e7dcc)
Always requires properly defined i915_reg_t type for MMIO handler
definition.
Fix kasan warning of "drivers/gpu/drm/i915/gvt/handlers.c:2397:1: error: the frame size of 32120 bytes is larger than 8192 bytes"
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We don't need any active planes during load detection, so just disable
them all. This saves us from having to come up with a suitable
framebuffer. And we also avoid leaving sprite/cursor planes on and
potentially presenting them at a peculiar location during the load
detection.
Changes since v1 (Maarten):
- Add missing call to add_all_affected_planes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102707
Link: https://patchwork.freedesktop.org/patch/msgid/20171220093545.613-4-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Looking at the coordination of resets with the submission of execlists,
it will be useful to have a GEM_TRACE for when we issue the reset.
Whilst there tidy up the other GEM_TRACE to always include the engine
name, and be careful not to trust any pointers prior to asserts.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171220090626.31643-1-chris@chris-wilson.co.uk
Commit 77affa3172 ("drm/i915/psr: Fix compiler warnings for
hsw_psr_disable()") swapped status and control registers while fixing
indentation. The _ctl at the end of the status register name must have to
led to this.
Fixes: 77affa3172 ("drm/i915/psr: Fix compiler warnings for hsw_psr_disable()")
References: https://www.mrc-cbu.cam.ac.uk/people/matt.davis/cmabridge/
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171220043520.2599-1-dhinakaran.pandiyan@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Use the local on-stack struct directly rather than hide it behind a
pointer. This should be both clearer for the reader and the compiler (we
rely on the compiler seeing through the functions to spot uninitialized
uses of the local).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171219130948.6282-1-chris@chris-wilson.co.uk
There seems to be another clock gating issue which the workaround is
described as:
"WA: Set 0xE4F0[1] = 1 to disable Early EOT of thread."
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171216001117.14232-2-rafael.antognolli@intel.com
We dump modparams in few places (debugfs, gpu_error) using different
functions. Lets add reusable function to avoid code duplication.
add/remove: 1/0 grow/shrink: 0/2 up/down: 1096/-2339 (-1243)
Function old new delta
i915_params_dump - 1096 +1096
i915_capabilities 1353 185 -1168
i915_error_state_to_str 5507 4336 -1171
Total: Before=1285716, After=1284473, chg -0.10%
v2: use forward decl rather than include (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171219114346.26308-3-michal.wajdeczko@intel.com
Convert intel_device_info_dump into pretty printer to be
consistent with the rest of the driver code.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171219114346.26308-2-michal.wajdeczko@intel.com
We dump device flags in few places (init_early, debugfs, gpu_error)
using different functions. Lets add reusable function to avoid
code duplication.
add/remove: 1/0 grow/shrink: 0/3 up/down: 1296/-3572 (-2276)
Function old new delta
intel_device_info_dump_flags - 1296 +1296
i915_capabilities 2435 1353 -1082
i915_error_state_to_str 6642 5507 -1135
intel_device_info_dump 1507 152 -1355
Total: Before=1287992, After=1285716, chg -0.18%
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171219114346.26308-1-michal.wajdeczko@intel.com
drivers/gpu/drm/i915/intel_ddi.c:2098 intel_ddi_clk_select() warn: inconsistent indenting
References: 8edcda1266 ("drm/i915: Protect DDI port to DPLL map from theoretical race.")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171219112649.9388-1-chris@chris-wilson.co.uk
After a reset, the state of the CSB registers are scrubbed and not valid
until a powercontext is reloaded. We only know when a powercontext has
been reloaded once we see a CS-interrupt, before then we must ignore the
CSB registers within the execlists_submission_tasklet. However, glk is
sporadically dying with an illegal CSB pointer value (both in the HSWP
and mmio) suggesting that it is running with the CS-interrupt bit set
before the powercontext has been reloaded. Make sure the clearing of
that bit is serialised on reset with the re-enabling of the tasklet.
References: https://bugs.freedesktop.org/show_bug.cgi?id=104262
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171219090110.11153-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
In case we have multiple modesets for different connectors
happening in parallel we could have a race on the RMW on these
shared registers.
This possibility was initially raised by Paulo when reviewing
commit '555e38d27317 ("drm/i915/cnl: DDI - PLL mapping")'
but the original possibility comes from commit '5416d871136d
("drm/i915/skl: Set the eDP link rate on DPLL0")'. Or maybe
later when atomic commits entered into picture.
Apparently the discussion around this topic showed that the
right solution would be on serializing the atomic commits in
a way that we don't have the possibility of races here since
if that parallel modeset happenings apparently many other
things will be on fire.
Code is there since SKL and there was no report of issue,
but since we never looked back to that serialization possibility,
and also we don't have an igt case for that it is better to at
least protect this corner.
Suggested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Fixes: 555e38d273 ("drm/i915/cnl: DDI - PLL mapping")
Fixes: 5416d87113 ("drm/i915/skl: Set the eDP link rate on DPLL0")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst maarten.lankhorst@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst maarten.lankhorst@linux.intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20171215224310.19103-1-rodrigo.vivi@intel.com
Now that we skip a per-engine reset on an idle engine, we need to update
the selftest to take that into account. In the process, we find that we
were not stressing the per-engine reset very hard, so add those missing
active resets.
v2: Actually test i915_reset_engine() by loading it with requests.
Fixes: f6ba181ada ("drm/i915: Skip an engine reset if it recovered before our preparations")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104313
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171217132852.30642-3-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
When monitoring the GPU with i915 perf, reports are tagged with a hw
id. Gem context creation tracepoints already have a hw_id field,
unfortunately you only get this correlation between a process id and a
hw context id once when the context is created. It doesn't help if you
started monitoring after the process was initialized or if the drm fd
was transfered from one process to another.
This change adds the hw_id field to gem requests, so that correlation
can also be done on submission.
v2: Place hw_id at the end of the tracepoint to not disrupt too much
existing tools (Chris)
v3: Reorder hw_id field again (Chris)
v4: Add missing hw_id to i915_gem_request_wait_begin tracepoint (Chris)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171218151959.14073-3-lionel.g.landwerlin@intel.com
Let's make the order of the fields of the tracepoints involving gem
request match across i915. This makes userspace processing of
tracepoint a bit easier.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171218151959.14073-2-lionel.g.landwerlin@intel.com
A useful bit of information for inspecting GPU stalls from
intel_engine_dump() are the error registers, IPEIR and IPEHR.
v2: Fixup gen changes in register offsets (Tvrtko)
v3: Old FADDR location as well
v4: Use I915_READ64_2x32
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171218123914.19027-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
We have an existing helper for testing obj->mm.pages, so use it.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171218103855.25274-1-matthew.auld@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Inside i915_gem_reset(), we start touching the HW and so require the
low-level HW to be re-enabled, in particular the PCI BARs.
Fixes: 7b6da818d8 ("drm/i915: Restore the kernel context after a GPU reset on an idle engine")
References: 0db8c96120 ("drm/i915: Re-enable GTT following a device reset")
Testcase: igt/drv_hangman #i915g/i915gm
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171217132852.30642-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Load host render mocs registers once for delta update of mocs switch, it
reduces mmio read times obviously, then brings performance improvement
during multi-vms switch.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Save and restore the mocs regs of one VM in GVT-g burning too much CPU
utilization. Add LRI command scan to monitor the change of mocs registers,
save the state in vreg, and use delta update policy to restore them.
It can obviously reduce the MMIO r/w count, and improve the performance
of context switch.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Now mmio switch between vGPUs need to switch to host first then to expected
vGPU, it waste one time mmio save/restore. r/w mmio usually is
time-consuming, and there are so many mocs registers need to save/restore
during vGPU switch. Combine the switch_to_host and switch_to_vgpu can
reduce 1 time mmio save/restore, it will reduce the CPU utilization and
performance while there is multi VMs with heavy work load.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Refine trace_render_mmio to show the vm id before and after vgpu switch,
tag host id as '0', this patch will be used in the future patch for refine
mocs switch policy.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Instead of trying different seq_puts messages, lets use common
-ENODEV error code to indicate missing/unsupported feature.
v2: don't forget about guc_log_control fops (Sagar)
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171215143635.17884-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
As part of the system requirement for powersaving is that we always have
a context loaded. Upon boot and resume, we load the kernel_context to
ensure that some valid state is set before powersaving kicks in, we
should do so after a full GPU reset as well. We only need to do so for
an idle engine, as any active engines will restart by executing the
stuck request, loading its context. For the idle engine, we create a
new request to load the kernel_context instead.
For whatever reason, perfoming a dummy execute on the idle engine after
reset papers over a subsequent GPU hang in rare circumstances, even on
machines not using contexts (e.g. Pineview).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104259
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104261
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171216000334.8197-1-chris@chris-wilson.co.uk
At the beginning of a reset, we disable the submission method and find
the stuck request. We expect to find a stuck request for we have
declared the engine stalled. However, if we find no active request, the
engine must have recovered from its stall before we could issue a reset,
so let the engine continue on without a reset. If the engine is truly
stuck, we will back soon enough with the next reset attempt.
v2: Remove the stale debug message.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171216002206.31737-1-chris@chris-wilson.co.uk
Just printk the string, or at least do not double up on the newlines!
Fixes: eef57324d9 ("drm/i915: setup bridge for HDMI LPE audio driver")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Jerome Anand <jerome.anand@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213182858.2159-1-chris@chris-wilson.co.uk
Internal objects consistent of scratch pages not subject to the
persistence guarantees of user facing objects. They are used for
example, in ring buffers where they are only required for temporary
storage of commands that will be rewritten every time. As they are
temporary constructs, quietly report -ENOMEM back along the callchain
rather than subject the system to oomkiller if an allocation fails.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171215101753.1519-1-chris@chris-wilson.co.uk
The code has an ifdef and uses two functions to either init the bare
spinlock or init it and set a lock-class. It is possible to do the same
thing without an ifdef.
With this patch (in debug case) we first use the "default" lock class
which is later overwritten to the supplied one. Without lockdep the set
name/class function vanishes.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171214131009.7479-1-joonas.lahtinen@linux.intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Knowing the state of the engine when hangcheck thinks it is stalling is
useful for both debugging hangcheck itself and the potential cause of an
unwanted stall.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171214122613.26134-1-chris@chris-wilson.co.uk
We have the selftest that's checking doorbell create/destroy, so there's
no need to check all doorbells delaying the reset every time.
We do want to have that extra sanity check at module load/unload though.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-7-michal.winiarski@intel.com
We can now move the clients allocation to submission_init path, rather
than keeping the condition inside submission_enable called on every
reset.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-6-michal.winiarski@intel.com
Full GPU reset causes GuC to be reset. This means that every time we're
doing a reset, we need to talk to GuC and tell it about doorbells.
Let's separate the communication part (create_doorbell) from our
internal bookkeeping (reserve_doorbell) so that we can cleanly separate
the initialization done at module load from reinitialization done at
reset in the following patch.
While I'm here, let's also add a proper (although slightly asymetric)
cleanup that doesn't try to communicate with GuC after it's already
gone, getting rid of "expected" warnings caused by GuC action failures
on module unload.
Note that I've also removed one of the tests (bitmap out of sync), since
it doesn't make much sense anymore - bitmaps are now not expected to
change during the lifetime of a client.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-5-michal.winiarski@intel.com
To make this operation a bit cleaner, we should make sure that the HW
can catch up by calling the new implementation right away.
Note that currently we're only touching the vfunc at module load time
(before GuC is even loaded), so this shouldn't cause any functional
changes.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-4-michal.winiarski@intel.com
After GPU reset, GuC HW needs to be reinitialized (with FW reload).
Unfortunately, we're doing some extra work there (mostly allocating stuff),
work that can be moved to guc_init and called once at driver load time.
As a side effect we're no longer hitting an assert in
i915_ggtt_enable_guc on suspend/resume.
v2: Do not duplicate disable_communication / reset_guc_interrupts
v3: Add proper teardown after rebase
References: 04f7b24ecc ("drm/i915/guc: Assert that we switch between known ggtt->invalidate functions")
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-3-michal.winiarski@intel.com
Since Michal introduced new user controllable errors other than -EIO
during i915_gem_init(), we need to actually unwind on the error path as
we have to abort the module load (and we expect to do so cleanly!).
As we now teardown key state and then mark the driver as wedged (on
EIO), we have to be careful to not allow ourselves to resume and
unwedge, thus attempting to use the uninitialised driver.
v2: Try not to free driver state for the suppressed EIO
v3: Use load-fault-injection to test both error/recovery paths.
References: 8620eb1dbb ("drm/i915/uc: Don't use -EIO to report missing firmware")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213134347.4608-1-chris@chris-wilson.co.uk
If we fail to allocate a request, we can reap the outstanding requests
and push them to the request's slab's freelist before trying again. This
forces us to ratelimit malicious clients that tie up all of the system
resources in requests, instead of causing a system-wide oom.
Testcase: igt/gem_shrink/execbuf1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171212180652.22061-3-chris@chris-wilson.co.uk
If a fence allocation fails in a blocking context, we will sleep on the
fence as a last resort. We can therefore allow ourselves to fail and
sleep on the fence instead of triggering a system-wide oom. This allows
us to throttle malicious clients that are consuming lots of system
resources by capping the amount of memory used by fences.
Testcase: igt/gem_shrink/execbufX
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171212180652.22061-2-chris@chris-wilson.co.uk
As kmalloc is allowed to block (if given the right flags), mark up the
two i915_sw_fence routines that may call kmalloc as potential sleeping
routines.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171212180652.22061-1-chris@chris-wilson.co.uk
It is illegal to perform an immediate free of the struct irq_work from
inside the irq_work callback (as irq_work_run_list modifies work->flags
after execution of the work->func()). As we use the irq_work to
coordinate the freeing of the callback from two different softirq paths,
we need to defer the kfree from inside our irq_work callback, for which
we can use kfree_rcu.
Fixes: 81c0ed21aa ("drm/i915/fence: Avoid del_timer_sync() from inside a timer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213094802.28243-1-chris@chris-wilson.co.uk
If wait_for_engines() fails and we resort to declaring the HW wedged,
dump the engine state for debugging.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211194135.27095-2-chris@chris-wilson.co.uk
Extract the timeout we use in i915_gem_idle_work_handler() and reuse it
for wait_for_engines() in i915_gem_wait_for_idle(). It too has the same
problem in sometimes having to wait for an extended period before the HW
settles, so make use of the same timeout.
References: 5427f20785 ("drm/i915: Bump wait-times for the final CS interrupt before parking")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211194135.27095-1-chris@chris-wilson.co.uk
It never meant what it said, as it was always the total size of the
Global GTT and not a limit upon memory usage. Originally it served as a
quick guide to the largest batch that could be submitted by userspace,
an approximation to its maximum RSS, but was phrased badly. Today with
the 48b ppgtt, it is even more meaningless. Replace with a more specific
debug message; those wanting to know how much "video ram" they have
should consult the userspace libraries for the relevant approximation.
v2: Rebase
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171212113532.22574-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Since on gen2, we do not universally have a GPU reset implementation, we
fail i915_reset() at intel_has_gpu_reset(). However, this is also
intentionally disabled for CI testing and so it only has a debug
message. Promote that debug message to a user-facing error message that
should explain why their machine became unusable following the GPU hang.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211204040.22858-1-chris@chris-wilson.co.uk
Keeps things consistent now that we make use of struct resource. This
should keep us covered in case we ever get huge amounts of stolen
memory.
v2: bunch of missing conversions (Chris)
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-10-matthew.auld@intel.com
Kick it out of i915_ggtt and keep it grouped with dsm and dsm_reserved,
where it makes the most sense.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-9-matthew.auld@intel.com
Now that we are using struct resource to track the stolen region, it is
more convenient if we track the mappable region in a resource as well.
v2: prefer iomap and gmadr naming scheme
prefer DEFINE_RES_MEM
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-8-matthew.auld@intel.com
Now that we are using struct resource to track the stolen region, it is
more convenient if we track the reserved portion of that region in a
resource as well.
v2: s/<= end + 1/< end/ (Chris)
v3: prefer DEFINE_RES_MEM
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-7-matthew.auld@intel.com
Now that we are using struct resource to track the stolen region, it is
more convenient if we track dsm in a resource as well.
v2: check range_overflow when writing to 32b registers (Chris)
pepper in some comments (Chris)
v3: refit i915_stolen_to_dma()
v4: kill ggtt->stolen_size
v5: some more polish
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-6-matthew.auld@intel.com
We duplicate the stolen discovery code in early-quirks and in i915,
however now that the stolen region is exported as a resource from
early-quirks we can nuke the duplication.
v2: check overflows_type
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-5-matthew.auld@intel.com
If we attempt to wake up a waiter, who is currently checking the seqno
it will be in the TASK_INTERRUPTIBLE state and ttwu will report success.
However, it is actually awake and functioning -- so delay reporting the
actual wake up until it sleeps. This fixes some spurious claims of
missed_breadcrumbs when running under heavy load; i.e. sufficient load to
preempt away the newly woken waiter before they complete their checks.
However, it does so at the cost of a rare false negative; where the
waiter changes between the check and ttwu -- the only way to fix that
would be to extend the reporting from ttwu where the check could be done
atomically.
v2: Defend against !CONFIG_SMP
v3: Don't filter out calls to wake_up_process
v4: Drop risky microoptimisation to skip wakeups
Testcase: igt/drv_missed_irq # sanity check we do detect missed_breadcrumb()
Testcase: igt/gem_concurrent_blit # for generating false positives
References: https://bugs.freedesktop.org/show_bug.cgi?id=100007
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171209124710.1606-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The intent here was that we would be listening to
i915_gem_request_unsubmit in order to cancel the signaler quickly and
release the reference on the request. Cancelling the signaler is done
directly via intel_engine_cancel_signaling (called from unsubmit), but
that does not directly wake up the signaling thread, and neither does
setting the request->global_seqno back to zero wake up listeners to the
request->execute waitqueue. So the only time that listening to the
request->execute waitqueue would wake up the signaling kthread would be
on the request resubmission, during which time we would already receive
wake ups from rejoining the global breadcrumbs wait rbtree.
Trying to wake up to release the request remains an issue. If the
signaling was cancelled and no other request required signaling, then it
is possible for us to shutdown with the reference on the request still
held. To ensure that we do not try to shutdown, leaking that request, we
kick the signaling threads whenever we disarm the breadcrumbs, i.e. on
parking the engine when idle.
v2: We do need to be sure to release the last reference on stopping the
kthread; asserting that it has been dropped already is insufficient.
Fixes: d6a2289d9d ("drm/i915: Remove the preempted request from the execution queue")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208121033.5236-1-chris@chris-wilson.co.uk
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Even for the mock i915 device, we need to initialise the
drm.mode_config, as we may ultimately query whether there are any KMS
users deep in the bowels of some paths (e.g. eviction). As we initialise
drm.mode_config we must cleanup after ourselves!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171209210835.32609-1-chris@chris-wilson.co.uk
In case function skl_format_to_drm returns -EINVAL, fmt turns into a huge
number as fmt is of type u32, hence there is an out-of-bounds read when
using fmt as an index for array skl_pixel_formats at line 225:
plane->bpp = skl_pixel_formats[fmt].bpp;
Fix this by comparing the value returned by function skl_format_to_drm
against the size of array skl_pixel_formats, so in case it is greater than
or equal to the number of items contained in skl_pixel_formats, print an
error message and return -EINVAL.
Addresses-Coverity-ID: 1462495
Addresses-Coverity-ID: 1462502 ("Out-of-bounds read")
Fixes: 9f31d1063b ("drm/i915/gvt: Add framebuffer decoder support")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
These 2 functions are coded by multiple person in multiple patches. The
'return' and 'goto err' are mix-used in same place, which cause the
function looks disorder. Unify to use only 'goto' so that the gvt lock
is acquired in one place and released in one place.
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Comparing the state tested by intel_engine_is_idle() and printed by
intel_engine_dump(), the only bit not shown is whether or not the device
is wedged. Add that little bit of information to the pretty printer so
that if the engine fails to idle we can see why.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208012303.25504-5-chris@chris-wilson.co.uk
Since a global reset affects the engine, include that along side the
per-engine reset counter when pretty printing the engine state in
intel_engine_dump().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208012303.25504-4-chris@chris-wilson.co.uk
Now that we have a common engine state pretty printer, we can use that
instead of the adhoc information printed when we miss a breadcrumb.
v2: Rearrange intel_engine_disarm_breadcrumbs() to avoid calling
intel_engine_dump() under the rb spinlock (Mika) and to pretty-print the
error state early so that we include the full list of waiters.
v3: Pass missed breadcrumb msg to pretty-printer as the header
v4: Preserve DRM_DEBUG_DRIVER filtering.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208012303.25504-3-chris@chris-wilson.co.uk
Pass in a format string (and args) to specify the header to be emitted
along with the engine state when pretty-printing. This allows the header
to be emitted inside the drm_printer stream, so sharing the same prefix
and output characteristics (e.g. debug level and filtering).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208012303.25504-2-chris@chris-wilson.co.uk
When printing the execlist ports, we first print the ELSP header then
follow it with the pretty-printed request. Since switching to
drm_printer and show the output via printk, it automatically appends a
newline to each call (unlike the old seq_printf output). To avoid the
unwanted line break, construct the ELSP request header in a temporary
buffer.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208012303.25504-1-chris@chris-wilson.co.uk
Chris requested this backmerge for a reconciliation on
drm_print.h between drm-misc-next and drm-intel-next-queued
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When intel_modeset_setup_plane_state() fails drop the local framebuffer
reference before jumping to the error, otherwise we leak the framebuffer.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: edde361711 ("drm/i915: Use atomic state to obtain load detection crtc, v3.")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171207220025.22698-1-chris@chris-wilson.co.uk
Even fbc isn't using this stuff anymore, so time to remove it.
Cleaning up one small piece of the atomic conversion cruft at the time
...
Quick explanation on why the plane->fb assignment is ok to delete: The
core code takes care of the refcounting and legacy ->fb pointer
updating, but drivers are allowed to update it ahead of time. Most
legacy modeset drivers did that as part of their set_config callback
(since that's how the legacy/crtc helpers worked). In i915 we only
need that to make the fbc code happy.
v2: don't nuke the assignement of intel_crtc->config, I accidentally
set CI ablaze :-) Spotted by Maarten. And better explain why nuking
the ->fb assignement shouldn't set off alarm bells.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171207143202.6021-1-daniel.vetter@ffwll.ch
It seems that the DMC likes to transition between the DC states a lot when
there are no connected displays (no active power domains) during command
submission.
This activity on DC states has a negative impact on the performance of the
chip with huge latencies observed in the interrupt handlers and elsewhere.
Simple tests like igt/gem_latency -n 0 are slowed down by a factor of
eight.
Work around it by introducing a new power domain named,
POWER_DOMAIN_GT_IRQ, associtated with the "DC off" power well, which is
held for the duration of command submission activity.
CNL has the same problem which will be addressed as a follow-up. Doing
that requires a fix for a DC6 context corruption problem in the CNL DMC
firmware which is yet to be released.
v2:
* Add commit text as comment in i915_gem_mark_busy. (Chris Wilson)
* Protect macro body with braces. (Jani Nikula)
v3:
* Add dedicated power domain for clarity. (Chris, Imre)
* Commit message and comment text updates.
* Apply to all big-core GEN9 parts apart for Skylake which is pending DMC
firmware release.
v4:
* Power domain should be inner to device runtime pm. (Chris)
* Simplify NEEDS_CSR_GT_PERF_WA macro. (Chris)
* Handle async DMC loading by moving the GT_IRQ power domain logic into
intel_runtime_pm. (Daniel, Chris)
* Include small core GEN9 as well. (Imre)
v5
* Special handling for async DMC load is not needed since on failure the
power domain reference is kept permanently taken. (Imre)
v6:
* Drop the NEEDS_CSR_GT_PERF_WA macro since all firmwares have now been
deployed. (Imre, Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100572
Testcase: igt/gem_exec_nop/headless
Cc: Imre Deak <imre.deak@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v5)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[Imre: Add note about applying the WA on CNL as a follow-up]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205132854.26380-1-tvrtko.ursulin@linux.intel.com
In the process of dmabuf_obj cleanup, the dmabuf_obj might be freed during
dmabuf_obj_put leaking intel_gvt_hypervisor_put_vfio_device.
Move intel_gvt_hypervisor_put_vfio_device and all the other dmabuf_obj ops
in front of dmabuf_obj_put and let every dmabuf_obj have a chance to call
intel_gvt_hypervisor_put_vfio_device to fix this leaking issue.
Fixes: e3a0d7976c53 ("drm/i915/gvt: Handle orphan dmabuf_objs")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Both ROM/VGA region are not supported for vGPU in GVT. But if the device
model want to get those region, we should return the correct information
but not leave the structure with random data. Change to same operation
of BAR3-BAR5 which are also not supported by vGPU.
Refer to function @intel_vgpu_rw.
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Rename the files to reflect their real role - to switch the mmio context of
each vGPU engine.
v2: update Makefile.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
After engine mmio switched, software still need write workload
submission registers. So we can remove the MMIO barriar in MMIO
switch.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Select appropriate mmio list at initialization time, so we don't need to
do duplicated work at where requires the mmio list.
V2:
- Add a termination mark of mmio list.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
