One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
or, like in this particular case:
size = sizeof(struct foo) + sizeof(void *) * count;
instance = devm_kzalloc(dev, size, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = devm_kzalloc(dev, struct_size(instance, entry, count),
GFP_KERNEL);
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180826184712.GA9330@embeddedor.com
This beats the heuristic that the connector is involved in what format
should be output for cases where this fails.
E.g. if there is a bridge that changes format between the encoder and the
connector, or if some of the RGB pins between the lcd controller and the
encoder are not routed on the PCB.
This is critical for the devices that have the "conflicting output
formats" issue (SAM9N12, SAM9X5, SAMA5D3), since the most significant
RGB bits move around depending on the selected output mode. For
devices that do not have the "conflicting output formats" issue
(SAMA5D2, SAMA5D4), this is completely irrelevant.
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180825085620.10566-5-peda@axentia.se
This enables more flexible devicetrees. You can e.g. have two output
nodes where one is not enabled, without the ordering affecting things.
Prior to this patch the active nodes had to have endpoint id zero and
upwards consecutively.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180825085620.10566-4-peda@axentia.se
But only if the highest pixel-clock frequency lower than requested
is significantly less accurate than the lowest frequency higher than
requested.
I pulled "10 times" as the discriminator out of the hat, and went with
that.
This is useful, if e.g. the target pixel-clock is 65MHz and the sys_clk
is 132MHz. In this case the highest possible pixel-clock lower than the
requested 65MHz is 52.8MHz, which is almost 20% off (and outside the
spec for the panel). The lowest possible pixel-clock higher than 65MHz
is 66MHz, which is a *much* better match, and only 1.5% off.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180824092458.13165-3-peda@axentia.se
If the divider used to get the pixel-clock is small, the granularity
of the frequencies possible for the pixel-clock is quite coarse. E.g.
requesting a pixel-clock of 65MHz with a sys_clk of 132MHz results
in the divider being set to 3 ending up with 44MHz.
By preferring the doubled sys_clk as base, the divider instead ends
up as 5 yielding a pixel-clock of 52.8Mhz, which is a definite
improvement.
While at it, clamp the divider so that it does not overflow in case
it gets big.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180824092458.13165-2-peda@axentia.se
This patch adds a 70ms mystery delay to the bridge driver in enable.
By experimentation, it seems like it can go anywhere up until we
initiate semi-auto link training. If we don't have the delay, link
training fails.
I tried to root cause this as best I could, but neither the datasheet
for the panel nor the bridge mention a delay of this magnitude in their
timing requirements. So for now, add the mystery delay until someone
figures out a better fix.
Changes in v3:
- Added to the set
Cc: Sandeep Panda <spanda@codeaurora.org>
Reviewed-by: Sandeep Panda <spanda@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180813213058.184821-8-sean@poorly.run
Pull IDA updates from Matthew Wilcox:
"A better IDA API:
id = ida_alloc(ida, GFP_xxx);
ida_free(ida, id);
rather than the cumbersome ida_simple_get(), ida_simple_remove().
The new IDA API is similar to ida_simple_get() but better named. The
internal restructuring of the IDA code removes the bitmap
preallocation nonsense.
I hope the net -200 lines of code is convincing"
* 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits)
ida: Change ida_get_new_above to return the id
ida: Remove old API
test_ida: check_ida_destroy and check_ida_alloc
test_ida: Convert check_ida_conv to new API
test_ida: Move ida_check_max
test_ida: Move ida_check_leaf
idr-test: Convert ida_check_nomem to new API
ida: Start new test_ida module
target/iscsi: Allocate session IDs from an IDA
iscsi target: fix session creation failure handling
drm/vmwgfx: Convert to new IDA API
dmaengine: Convert to new IDA API
ppc: Convert vas ID allocation to new IDA API
media: Convert entity ID allocation to new IDA API
ppc: Convert mmu context allocation to new IDA API
Convert net_namespace to new IDA API
cb710: Convert to new IDA API
rsxx: Convert to new IDA API
osd: Convert to new IDA API
sd: Convert to new IDA API
...
Pixel blend modes represent the alpha blending equation
selection, describing how the pixels from the current
plane are composited with the background.
Adds a pixel_blend_mode to drm_plane_state and a
blend_mode_property to drm_plane, and related support
functions.
Defines three blend modes in drm_blend.h.
Changes since v1:
- Moves the blending equation into the DOC comment
- Refines the comments of drm_plane_create_blend_mode_property to not
enumerate the #defines, but instead the string values
- Uses fg.* instead of pixel.* and plane_alpha instead of plane.alpha
Changes since v2:
- Refines the comments of drm_plane_create_blend_mode_property:
1) Puts the descriptions (after the ":") on a new line
2) Adds explaining why @supported_modes need PREMUL as default
Changes since v3:
- Refines drm_plane_create_blend_mode_property(). drm_property_add_enum()
can calculate the index itself just fine, so no point in having the
caller pass it in.
- Since the current DRM assumption is that alpha is premultiplied
as default, define DRM_MODE_BLEND_PREMULTI as 0 will be better.
- Refines some comments.
Changes since v4:
- Adds comments in drm_blend.h.
- Removes setting default value in drm_plane_create_blend_mode_property()
as it is already in __drm_atomic_helper_plane_reset().
- Fixes to use state->pixel_blend_mode instead of using
plane->state->pixel_blend_mode in reset function.
- Rebases on drm-misc-next.
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Lowry Li <lowry.li@arm.com>
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/245734/
-----BEGIN PGP SIGNATURE-----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=kMpO
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-08-24' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Just a couple of fixes"
One MAINTAINERS address change, two panels fixes, and set of amdgpu
fixes (build fixes, display fixes and some others)"
* tag 'drm-next-2018-08-24' of git://anongit.freedesktop.org/drm/drm:
drm/edid: Add 6 bpc quirk for SDC panel in Lenovo B50-80
drm/amd/display: Don't build DCN1 when kcov is enabled
Revert "drm/amdgpu/display: Replace CONFIG_DRM_AMD_DC_DCN1_0 with CONFIG_X86"
drm/amdgpu/display: disable eDP fast boot optimization on DCE8
drm/amdgpu: fix amdgpu_amdkfd_remove_eviction_fence v3
drm/amdgpu: fix incorrect use of drm_file->pid
drm/amdgpu: fix incorrect use of fcheck
drm/powerplay: enable dpm under pass-through
drm/amdgpu: access register without KIQ
drm/amdgpu: set correct base for THM/NBIF/MP1 IP
drm/amd/display: fix dentist did ranges
drm/amd/display: make dp_ss_off optional
drm/amd/display: fix dp_ss_control vbios flag parsing
drm/amd/display: Do not retain link settings
MAINTAINERS: drm-misc: Change seanpaul's email address
drm/panel: simple: tv123wam: Add unprepare delay
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL);
This issue was detected with the help of Coccinelle.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180824010521.GA25451@embeddedor.com
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlt/HtEACgkQlvcN/ahK
BwqicggAiznJTnhjyrM/PWwJnX1eq4jgGuHpB5hEBPonpf7F9Th46nTNoKmzIArD
5HEYT342umHJXVENlPvxCUvyB/JWvOY7eZOnO57gekh7s1xC/cezRDWkG1Swx1YD
YZGwox+eTboJIalaXILUu8eiSkfBJJ40QFDkeGDJ3or45V4tSdujqM4TIQfWKoWb
bIAdaaS6TG78nkR4L2DyGCx5Fn1j4ErJzLMrAuwfx5mU39p41EMBQWiqRhXdqzs2
FHW+5L5tbfrfskAZBMUqvrUy72jsvA7309u8n05n7gCJiIRmrLx+UVZXCD+EnvSu
7S3KWj2qxrCL9jykZxO2Q6ocSp167Q==
=pFBQ
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2018-08-23-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
- Add quirk to Lenovo B50-80 to use 6 bpc instead of 8 (Feng)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20180823205434.GA137644@art_vandelay
Use new return type vm_fault_t for fault handler. For now, this is just
documenting that the function returns a VM_FAULT value rather than an
errno. Once all instances are converted, vm_fault_t will become a
distinct type.
Ref-> 1c8f422059 ("mm: change return type to vm_fault_t")
Previously vm_insert_{pfn,mixed} returns err which driver mapped into
VM_FAULT_* type. The new function vmf_insert_{pfn,mixed} will replace
this inefficiency by returning VM_FAULT_* type.
vmf_error() is the newly introduce inline function in 4.17-rc6.
Link: http://lkml.kernel.org/r/20180713154541.GA3345@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit cafa0010cd ("Raise the minimum required gcc version to 4.6")
recently exposed a brittle part of the build for supporting non-gcc
compilers.
Both Clang and ICC define __GNUC__, __GNUC_MINOR__, and
__GNUC_PATCHLEVEL__ for quick compatibility with code bases that haven't
added compiler specific checks for __clang__ or __INTEL_COMPILER.
This is brittle, as they happened to get compatibility by posing as a
certain version of GCC. This broke when upgrading the minimal version
of GCC required to build the kernel, to a version above what ICC and
Clang claim to be.
Rather than always including compiler-gcc.h then undefining or
redefining macros in compiler-intel.h or compiler-clang.h, let's
separate out the compiler specific macro definitions into mutually
exclusive headers, do more proper compiler detection, and keep shared
definitions in compiler_types.h.
Fixes: cafa0010cd ("Raise the minimum required gcc version to 4.6")
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Eli Friedman <efriedma@codeaurora.org>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is used for handling future fences. Currently no driver use
these, and I think given the new timeline fence proposed by KHR it
would be better to have a more abstract interface for future fences.
Could be something simple like a struct dma_future_fence plus a
function to add a callback or wait for the fence to materialize.
Then syncobj (and anything else really) could grow new functions to
expose these two drivers. Normal dma_fence would then keep the nice
guarantee that they will always signal (and through ordering, be
deadlock free). dma_future_fence would then be the tricky one.
This also fixes sphinx complaining about the kerneldoc.
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180822092905.19884-1-daniel.vetter@ffwll.ch
There are several blockable mmu notifiers which might sleep in
mmu_notifier_invalidate_range_start and that is a problem for the
oom_reaper because it needs to guarantee a forward progress so it cannot
depend on any sleepable locks.
Currently we simply back off and mark an oom victim with blockable mmu
notifiers as done after a short sleep. That can result in selecting a new
oom victim prematurely because the previous one still hasn't torn its
memory down yet.
We can do much better though. Even if mmu notifiers use sleepable locks
there is no reason to automatically assume those locks are held. Moreover
majority of notifiers only care about a portion of the address space and
there is absolutely zero reason to fail when we are unmapping an unrelated
range. Many notifiers do really block and wait for HW which is harder to
handle and we have to bail out though.
This patch handles the low hanging fruit.
__mmu_notifier_invalidate_range_start gets a blockable flag and callbacks
are not allowed to sleep if the flag is set to false. This is achieved by
using trylock instead of the sleepable lock for most callbacks and
continue as long as we do not block down the call chain.
I think we can improve that even further because there is a common pattern
to do a range lookup first and then do something about that. The first
part can be done without a sleeping lock in most cases AFAICS.
The oom_reaper end then simply retries if there is at least one notifier
which couldn't make any progress in !blockable mode. A retry loop is
already implemented to wait for the mmap_sem and this is basically the
same thing.
The simplest way for driver developers to test this code path is to wrap
userspace code which uses these notifiers into a memcg and set the hard
limit to hit the oom. This can be done e.g. after the test faults in all
the mmu notifier managed memory and set the hard limit to something really
small. Then we are looking for a proper process tear down.
[akpm@linux-foundation.org: coding style fixes]
[akpm@linux-foundation.org: minor code simplification]
Link: http://lkml.kernel.org/r/20180716115058.5559-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Christian König <christian.koenig@amd.com> # AMD notifiers
Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx and umem_odp
Reported-by: David Rientjes <rientjes@google.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit e8fa567118.
Don't wait for first CRC during crtc_crc_open. It avoids one frame wait
during open. If application want to wait after read call, it can use
poll/read blocking read() call.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180821083858.26275-4-mahesh1.kumar@intel.com
This patch make changes to allocate crc-entries buffer before
enabling CRC generation.
It moves all the failure check early in the function before setting
the source or memory allocation.
Now set_crc_source takes only two variable inputs, values_cnt we
already gets as part of verify_crc_source.
Changes since V1:
- refactor code to use single spin lock
Changes since V2:
- rebase
Changes since V3:
- rebase on top of VKMS driver
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Leo Li <sunpeng.li@amd.com> (V2)
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> (V3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180821083858.26275-3-mahesh1.kumar@intel.com
This patch implements "verify_crc_source" callback function for
Virtual KMS drm driver.
Changes Since V1:
- update values_cnt in verify_crc_source
Changes Since V2:
- don't return early from set_crc_source to keep behavior same (Haneen)
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180821083858.26275-2-mahesh1.kumar@intel.com
Reorder allocation to avoid an awkward lock/unlock/lock sequence.
Simpler code due to being able to use ida_alloc_max(), even if we can't
eliminate the driver's spinlock.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
DCN1 contains code that utilizes fp math. When
CONFIG_KCOV_INSTRUMENT_ALL and CONFIG_KCOV_ENABLE_COMPARISONS are
enabled, build errors are found. See this earlier patch for details:
https://lists.freedesktop.org/archives/dri-devel/2018-August/186131.html
As a short term solution, disable CONFIG_DRM_AMD_DC_DCN1_0 when
KCOV_INSTRUMENT_ALL and KCOV_ENABLE_COMPARISONS are enabled. In
addition, make it a fully derived config, taking into account
CONFIG_X86.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 8624c3c4dbfe24fc6740687236a2e196f5f4bfb0.
We need CONFIG_DRM_AMD_DC_DCN1_0 to guard code that is using fp math.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix quite a number of bugs here. Unfortunately only compile tested.
v2: fix copy&paste error
v3: fix 80 chars issue in comment
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That's the PID of the creator of the file (usually the X server) and not
the end user of the file.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
The usage isn't RCU protected.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
Repeat enable dpm under pass-through because there is no actually
hardware-fini and real power-off when guest vm shutdown or reboot.
Otherwise, under pass-through it will be failed to populate populate
and upload SCLK MCLK DPM levels due to zero of pcie_speed_table.count.
Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
there is no need to access register such as mmSMC_IND_INDEX_11
and mmSMC_IND_DATA_11 through KIQ because they are VF-copy.
Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set correct address base for vega20.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dentist did ranges were incomplete as max setting has an unusual
divider step up of 66.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dp_ss_off flag doesn't need to be set, so we create a link_init
function if it is needed by an asic
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dp_ss_control = 0 means ss is off, we had a typo where
we would double not dp_ss_control while setting dp_ss_off
flag
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do not retrain link settings if lane count and link rate are both
unknown. Causes driver to be stuck reading VBIOS register after
removing emulated connection.
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
- Add ChromeOS EC CEC driver
- Add ROHM BD71837 PMIC driver
- New Device Support
- Add support for Dialog Semi DA9063L PMIC variant to DA9063
- Add support for Intel Ice Lake to Intel-PLSS-PCI
- Add support for X-Powers AXP806 to AXP20x
- New Functionality
- Add support for USB Charging to the ChromeOS Embedded Controller
- Add support for HDMI CEC to the ChromeOS Embedded Controller
- Add support for HDMI CEC to Intel HDMI
- Add support for accessory detection to Madera devices
- Allow individual pins to be configured via DT' wlf,csnaddr-pd
- Provide legacy platform specific EEPROM/Watchdog commands; rave-sp
- Fix-ups
- Trivial renaming/spelling fixes; cros_ec, da9063-*
- Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
- Transition to helper macros/functions; da9063-*
- Constify; kempld-core
- Improve error path/messages; wm8994-core
- Disable IRQs locally instead of relying on USB subsystem; dln2
- Remove unused code; rave-sp
- New exports; sec-core
- Bug Fixes
- Fix possible false I2C transaction error; arizona-core
- Fix declared memory area size; hi655x-pmic
- Fix checksum type; rave-sp
- Fix incorrect default serial port configuration: rave-sp
- Fix incorrect coherent DMA mask for sub-devices; sm501
-----BEGIN PGP SIGNATURE-----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=4Yj4
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
- Add ChromeOS EC CEC driver
- Add ROHM BD71837 PMIC driver
New Device Support:
- Add support for Dialog Semi DA9063L PMIC variant to DA9063
- Add support for Intel Ice Lake to Intel-PLSS-PCI
- Add support for X-Powers AXP806 to AXP20x
New Functionality:
- Add support for USB Charging to the ChromeOS Embedded Controller
- Add support for HDMI CEC to the ChromeOS Embedded Controller
- Add support for HDMI CEC to Intel HDMI
- Add support for accessory detection to Madera devices
- Allow individual pins to be configured via DT' wlf,csnaddr-pd
- Provide legacy platform specific EEPROM/Watchdog commands; rave-sp
Fix-upsL
- Trivial renaming/spelling fixes; cros_ec, da9063-*
- Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
- Transition to helper macros/functions; da9063-*
- Constify; kempld-core
- Improve error path/messages; wm8994-core
- Disable IRQs locally instead of relying on USB subsystem; dln2
- Remove unused code; rave-sp
- New exports; sec-core
Bug Fixes:
- Fix possible false I2C transaction error; arizona-core
- Fix declared memory area size; hi655x-pmic
- Fix checksum type; rave-sp
- Fix incorrect default serial port configuration: rave-sp
- Fix incorrect coherent DMA mask for sub-devices; sm501"
* tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
mfd: madera: Add register definitions for accessory detect
mfd: sm501: Set coherent_dma_mask when creating subdevices
mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC
mfd: bd71837: Core driver for ROHM BD71837 PMIC
media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC
mfd: sec-core: Export OF module alias table
mfd: as3722: Disable auto-power-on when AC OK
mfd: axp20x: Support AXP806 in I2C mode
mfd: axp20x: Add self-working mode support for AXP806
dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806
mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts
mfd: wm8994: Allow to configure Speaker Mode Pullup from dts
mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it
mfd: rave-sp: Add legacy watchdog ping command translation
mfd: rave-sp: Add legacy EEPROM access command translation
mfd: rave-sp: Initialize flow control and parity of the port
mfd: rave-sp: Fix incorrectly specified checksum type
mfd: rave-sp: Remove unused defines
mfd: hi655x: Fix regmap area declared size for hi655x
mfd: ti_am335x_tscadc: Fix struct clk memory leak
...
For multi-planar formats, while calculating offsets in planes with index greater than 0
(ie second plane, third plane, etc), one needs to divide (src_x * cpp) with horizontal
chroma subsampling factor and (src_y * pitch) with vertical chroma subsampling factor.
The reason being that the planes contain subsampled (ie reduced) data (by a factor of 2) and thus
while calculating the byte position coresponding to the x and y co-ordinates, one needs to
divide it with the sampling factor.
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.kernel.org/patch/10569263/
Here is the bit set of char/misc drivers for 4.19-rc1
There is a lot here, much more than normal, seems like everyone is
writing new driver subsystems these days... Anyway, major things here
are:
- new FSI driver subsystem, yet-another-powerpc low-level
hardware bus
- gnss, finally an in-kernel GPS subsystem to try to tame all of
the crazy out-of-tree drivers that have been floating around
for years, combined with some really hacky userspace
implementations. This is only for GNSS receivers, but you
have to start somewhere, and this is great to see.
Other than that, there are new slimbus drivers, new coresight drivers,
new fpga drivers, and loads of DT bindings for all of these and existing
drivers.
Full details of everything is in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3g7ew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykfBgCeOG0RkSI92XVZe0hs/QYFW9kk8JYAnRBf3Qpm
cvW7a+McOoKz/MGmEKsi
=TNfn
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the bit set of char/misc drivers for 4.19-rc1
There is a lot here, much more than normal, seems like everyone is
writing new driver subsystems these days... Anyway, major things here
are:
- new FSI driver subsystem, yet-another-powerpc low-level hardware
bus
- gnss, finally an in-kernel GPS subsystem to try to tame all of the
crazy out-of-tree drivers that have been floating around for years,
combined with some really hacky userspace implementations. This is
only for GNSS receivers, but you have to start somewhere, and this
is great to see.
Other than that, there are new slimbus drivers, new coresight drivers,
new fpga drivers, and loads of DT bindings for all of these and
existing drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
android: binder: Rate-limit debug and userspace triggered err msgs
fsi: sbefifo: Bump max command length
fsi: scom: Fix NULL dereference
misc: mic: SCIF Fix scif_get_new_port() error handling
misc: cxl: changed asterisk position
genwqe: card_base: Use true and false for boolean values
misc: eeprom: assignment outside the if statement
uio: potential double frees if __uio_register_device() fails
eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
misc: ti-st: Fix memory leak in the error path of probe()
android: binder: Show extra_buffers_size in trace
firmware: vpd: Fix section enabled flag on vpd_section_destroy
platform: goldfish: Retire pdev_bus
goldfish: Use dedicated macros instead of manual bit shifting
goldfish: Add missing includes to goldfish.h
mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
dt-bindings: mux: add adi,adgs1408
Drivers: hv: vmbus: Cleanup synic memory free path
Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
...
-----BEGIN PGP SIGNATURE-----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=vyiz
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-08-17-1' of git://anongit.freedesktop.org/drm/drm
Pull drm msm support for adreno a6xx from Dave Airlie:
"This is the support for new Qualcomm Snapdragon SoCs with the A6xx
core. Userspace support is in mesa now"
* tag 'drm-next-2018-08-17-1' of git://anongit.freedesktop.org/drm/drm:
drm/msm: a6xx: fix spelling mistake: "initalization" -> "initialization"
drm/msm: Add A6XX device support
drm/msm: update generated headers
drm/msm/adreno: Load the firmware before bringing up the hardware
drm/msm: Add a helper function to parse clock names
-----BEGIN PGP SIGNATURE-----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=RsR5
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-08-17' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"First round of fixes for -rc1. I'll follow this up with the msm new hw
support pull request.
This just has three sets of fixes, some for msm before the new hw, a
bunch of AMD fixes (includiing some required firmware changes for new
hw), and a set of i915 (+gvt) fixes"
* tag 'drm-next-2018-08-17' of git://anongit.freedesktop.org/drm/drm: (30 commits)
drm/amdgpu: Use kvmalloc for allocating UVD/VCE/VCN BO backup memory
drm/i915: set DP Main Stream Attribute for color range on DDI platforms
drm/i915/selftests: Hold rpm for unparking
drm/i915: Restore user forcewake domains across suspend
drm/i915: Unmask user interrupts writes into HWSP on snb/ivb/vlv/hsw
drm/i915/gvt: fix memory leak in intel_vgpu_ioctl()
drm/i915/gvt: Off by one in intel_vgpu_write_fence()
drm/i915/kvmgt: Fix potential Spectre v1
drm/i915/gvt: return error on cmd access
drm/i915/gvt: initialize dmabuf mutex in vgpu_create
drm/i915/gvt: fix cleanup sequence in intel_gvt_clean_device
drm/amd/display: Guard against null crtc in CRC IRQ
drm/amd/display: Pass connector id when executing VBIOS CT
drm/amd/display: Check if clock source in use before disabling
drm/amd/display: Allow clock sharing b/w HDMI and DVI
drm/amd/display: Fix warning observed in mode change on Vega
drm/amd/display: fix single link DVI has no display
drm/amdgpu/vce: VCE entity initialization relies on ring initializtion
drm/amdgpu/uvd: UVD entity initialization relys on ring initialization
drm/amdgpu:add VCN booting with firmware loaded by PSP
...
dma_fence_default_wait is the default now, same for the trivial
enable_signaling implementation.
Also remove the ->signaled callback, vgem can't peek ahead with a
fastpath, returning false is the default implementation.
v2: Protect the meaningful space! (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Kees Cook <keescook@chromium.org>
Cc: Cihangir Akturk <cakturk@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180809124544.9250-1-daniel.vetter@ffwll.ch
dma_fence_default_wait is the default now, same for the trivial
enable_signaling implementation.
v2: Also remove the relase hook, dma_fence_free is the default.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20180704092909.6599-2-daniel.vetter@ffwll.ch
An optional follow-on PR for 4.19, on top of previous -fixes PR, which
brings in a6xx support.
These patches have been on list since earlier in the year (mostly
waiting for userspace). They have been in linux-next since earlier in
the week, now that we have freedreno userspace working on a6xx[1][2].
So far glmark2, Chromium/ChromiumOS, gnome-shell, glamor, xonotic,
etc, are working. And a healthy chuck of deqp works, and I've been
busy fixing things. The needed libdrm changes (no new uapi changes
needed) are already on master, and the 2nd branch is rebased on that.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGuCKekZ2Dho80qxODT1BEUGg4hbq33ACUy5VXs3dHbDLA@mail.gmail.com
- DP full color range.
- selftest for gem_object
- forcewake on suspend
- GPU reset
This also include accumulated fixes from GVT:
- Fix an error code in gvt_dma_map_page() (Dan)
- Fix off by one error in intel_vgpu_write_fence() (Dan)
- Fix potential Spectre v1 (Gustavo)
- Fix workload free in vgpu release (Henry)
- Fix cleanup sequence in intel_gvt_clean_device (Henry)
- dmabuf mutex init place fix (Henry)
- possible memory leak in intel_vgpu_ioctl() err path (Yi)
- return error on cmd access check failure (Yan)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbdcppAAoJEPpiX2QO6xPKZ+IH/jzYLJDShTvJ01gyXMmNUn2/
JLKOVnKuBzDZj3duQHZTXZBBwC+Gr66uC0iX9hA0Zl/La/jmZdHfxY4PBDzlIuxq
AZpK9kX7yKAP9TfbF35H6qUb3n09rlWO6L4pMtdO8nS1oMHEZ1UXTz9okjQQ/GFd
hl4btwNo75xDB4aBFFNKT/bhpjSl0Yuox60Ff5q4kJ4XiZ88NKx+H9fppJWk/j3P
YK972jnR1NugYmVuhL8ENFt1b1IuQ7Rn64O7SqYNou2Xcr1yM7lCFGyWDf2Tang/
MSisLRmJSnHYSZ0d1qjJS3tRuTnQg0s3xi7KheMFYFnjYv8sR5hzvrDbFHYHzc8=
=Esml
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-fixes-2018-08-16-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Fixes for:
- DP full color range.
- selftest for gem_object
- forcewake on suspend
- GPU reset
This also include accumulated fixes from GVT:
- Fix an error code in gvt_dma_map_page() (Dan)
- Fix off by one error in intel_vgpu_write_fence() (Dan)
- Fix potential Spectre v1 (Gustavo)
- Fix workload free in vgpu release (Henry)
- Fix cleanup sequence in intel_gvt_clean_device (Henry)
- dmabuf mutex init place fix (Henry)
- possible memory leak in intel_vgpu_ioctl() err path (Yi)
- return error on cmd access check failure (Yan)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180816190335.GA7765@intel.com
