2 more patches to stabilize the new MMUv2 support.
* 'drm-etnaviv-fixes' of git://git.pengutronix.de/lst/linux:
drm/etnaviv: block 64K of address space behind each cmdstream
drm/etnaviv: ensure write caches are flushed at end of user cmdstream
This removes the 'write' and 'force' from get_user_pages_remote() and
replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in
callers as use of this flag can result in surprising behaviour (and
hence bugs) within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To make sure we don't place anything there which might confuse
the FE prefetcher. This gets rid of another case of FE MMU faults
when the address space gets crowded before triggering the reaper.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
If the GPU is done with one user command stream the buffers referenced
by this command stream may go away and get unmapped from the MMU. If
the write caches are still dirty at this point later evictions will run
into MMU faults, killing the GPU.
Make sure the write caches are flushed before signaling completion
of the user command stream.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Notable changes:
- Cleanups from Fabio to some error paths and proper error propagation.
- Lots of refactoring and new code to support the new MMU version 2,
still relatively unoptimized and doesn't yet provide better process
isolation than MMUv1, but enough to get newer cores up and running.
- New hardware support: GC3000, as found on the NXP i.MX6 QuadPlus SoC.
* 'drm-etnaviv-next' of git://git.pengutronix.de/git/lst/linux: (25 commits)
drm/etnaviv: mark whole context as lost in recover worker
drm/etnaviv: record correct cmdbuf IOVA in dump
drm/etnaviv: space out IOVA layout for cmdbufs on MMUv2
drm/etnaviv: fix up model and revision for GC2000+
drm/etnaviv: implement IOMMUv2 translation
drm/etnaviv: handle MMU exception in IRQ handler
drm/etnaviv: add flushing logic for MMUv2
drm/etnaviv: add function to construct MMUv2 init buffer
drm/etnaviv: map cmdbuf through MMU on version 2
drm/etnaviv: split out iova search and MMU reaping logic
drm/etnaviv: split out FE start
drm/etnaviv: split out wait for gpu idle
drm/etnaviv: move gpu_va() to etnaviv mmu
drm/etnaviv: remove unused iommu_v2 header
drm/etnaviv: move IOMMU domain allocation into etnaviv MMU
drm/etnaviv: indirect IOMMU restore through etnaviv MMU
drm/etnaviv: move linear window setup into etnaviv_iommuv1_restore
drm/etnaviv: rename etnaviv_iommu_domain_restore to etnaviv_iommuv1_restore
drm/etnaviv: only check if the cmdbuf is inside the linear window on MMUv1
drm/etnaviv: only try to use the linear window on MMUv1
...
There are many reasons other than ENOMEM that drm_dev_init() can
fail. Return ERR_PTR rather than NULL to be able to distinguish
these in the caller.
Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160921145919.13754-2-teg@jklm.no
If we reset the GPU to get it back into a usable state we lose
all context, not just the MMU one. Mark the whole context as
lost to trigger a restore of the exec and MMU state.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
For cmdbufs the CPU IOVA was recorded instead of the GPU one.
Fix this to make it consistent with other BOs and to make
reading the dumps easier.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
At least on the GC3000 the FE MMU is not properly flushing stale TLB
entries. Make sure to map the cmdbufs with a big enough spacing in
the IOVAs to not hit old/prefetched TLB entries when jumping to a
newly mapped cmdbuf.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
GC2000+ on the i.MX6QP is just a re-branded GC3000, lets call it by
its real name to avoid confusion in other parts of the driver.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
All other parts are now in place, so implement the actual translation
step and hook it up, so the driver claims support for cores with
the new MMU.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Bit 30 of the interrupt status signals an MMU exception. Handle this
condition properly and dump some useful registers.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Flushing works differently on MMUv2, in that it's only necessary
to set a single bit in the control register to flush all translation
units. A semaphore stall then makes sure that the flush has propagated
properly.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Both the safe/scratch address and the master TLB address are per pipe
with the CPU mapped registers not properly propagating to the
different translation units.
The only way to correctly configure all translation units is to have
a command stream snipped executed by the FE, before any other execution
can start.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
With MMUv2 all buffers need to be mapped through the MMU once it
is enabled. Align the buffer size to 4K, as the MMU is only able to
map page aligned buffers.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
With MMUv2 the command buffers need to be mapped through the MMU.
Split out the iova search and MMU reaping logic so it can be reused
for the cmdbuf mapping, where no GEM object is involved.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Split out into a new externally visible function, as the IOMMUv2
code needs this functionality, too.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Split out into a new externally visible function, as the IOMMUv2
code needs this functionality, too.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The GPU virtual address for the command buffers differs depending on
the IOMMU version. Move the calculation of the iova into etnaviv
mmu, to enable proper dispatch.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The GPU code doesn't need to deal with the IOMMU directly, instead
it can all be hidden behind the etnaviv mmu interface. Move the
last remaining part into etnaviv mmu.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This function has external visibility and only handles the Vivant IOMMU
version 1. Rename to make this more clear and allow a clear separation
of the different IOMMU versions.
Also drop the domain parameter, as we can infer it from the GPU we are
dealing with.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
There is no linear window on MMUv2 and the FE can access the full 4GB
address space either directly (as long as the MMU isn't configured) or
through the MMU, once it is up.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
As the comment above the code states, the linear window is only
available on MMUv1. Don't try to use it on MMUv2.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The driver doesn't ever enable individual clocks alone, so there
is no need to scatter the clock enable/disable sequences through
multiple functions. Fold them into the top one.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
In the etnaviv_gpu_platform_probe() error path the 'fail' label is
used to just return the error code.
This can be simplified by returning the error code immediately, so
get rid of the unneeded 'fail' label.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
clk_prepare_enable() may fail, so we should better check for its return
value and propagate it in the case of failure.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
It's deprecated and only should be used by drivers which still use
drm_platform_init, not by anyone else.
And indeed it's entirely unused and can be nuked.
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-6-git-send-email-daniel.vetter@ffwll.ch
Since commit 4984979b9b ("drm/irq: simplify irq checks in
drm_wait_vblank"), the drm driver feature flag DRIVER_HAVE_IRQ is only
required for drivers that have an IRQ handler managed by the DRM core.
Some drivers, armada, etnaviv, kirin and sti, set this flag without
.irq_handler setup in drm_driver. These drivers manage IRQ handler
by themselves and the flag DRIVER_HAVE_IRQ makes no sense there.
Drop the flag for these drivers to avoid confusion.
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk> (for armada and etnaviv)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1471331168-5601-1-git-send-email-shawnguo@kernel.org
Both the fence and event alloc are safe to be done without holding the GPU
lock, as they either don't need any locking (fences) or are protected by
their own lock (events).
This solves a bad locking interaction between the submit path and the
recover worker. If userspace manages to exhaust all available events while
the GPU is hung, the submit will wait for events to become available
holding the GPU lock. The recover worker waits for this lock to become
available before trying to recover the GPU which frees up the allocated
events. Essentially both paths are deadlocked until the submit path
times out waiting for available events, failing the submit that could
otherwise be handled just fine if the recover worker had the chance to
bring the GPU back in a working state.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Merge drm updates from Dave Airlie:
"This is the main drm pull request for 4.8.
I'm down with a cold at the moment so hopefully this isn't in too bad
a state, I finished pulling stuff last week mostly (nouveau fixes just
went in today), so only this message should be influenced by illness.
Apologies to anyone who's major feature I missed :-)
Core:
Lockless GEM BO freeing
Non-blocking atomic work
Documentation changes (rst/sphinx)
Prep for new fencing changes
Simple display helpers
Master/auth changes
Register/unregister rework
Loads of trivial patches/fixes.
New stuff:
ARM Mali display driver (not the 3D chip)
sii902x RGB->HDMI bridge
Panel:
Support for new panels
Improved backlight support
Bridge:
Convert ADV7511 to bridge driver
ADV7533 support
TC358767 (DSI/DPI to eDP) encoder chip support
i915:
BXT support enabled by default
GVT-g infrastructure
GuC command submission and fixes
BXT workarounds
SKL/BKL workarounds
Demidlayering device registration
Thundering herd fixes
Missing pci ids
Atomic updates
amdgpu/radeon:
ATPX improvements for better dGPU power control on PX systems
New power features for CZ/BR/ST
Pipelined BO moves and evictions in TTM
GPU scheduler improvements
GPU reset improvements
Overclocking on dGPUs with amdgpu
Polaris powermanagement enabled
nouveau:
GK20A/GM20B volt and clock improvements.
Initial support for GP100/GP104 GPUs, GP104 will not yet support
acceleration due to NVIDIA having not released firmware for them as of yet.
exynos:
Exynos5433 SoC with IOMMU support.
vc4:
Shader validation for branching
imx-drm:
Atomic mode setting conversion
Reworked DMFC FIFO allocation
External bridge support
analogix-dp:
RK3399 eDP support
Lots of fixes.
rockchip:
Lots of small fixes.
msm:
DT bindings cleanups
Shrinker and madvise support
ASoC HDMI codec support
tegra:
Host1x driver cleanups
SOR reworking for DP support
Runtime PM support
omapdrm:
PLL enhancements
Header refactoring
Gamma table support
arcgpu:
Simulator support
virtio-gpu:
Atomic modesetting fixes.
rcar-du:
Misc fixes.
mediatek:
MT8173 HDMI support
sti:
ASOC HDMI codec support
Minor fixes
fsl-dcu:
Suspend/resume support
Bridge support
amdkfd:
Minor fixes.
etnaviv:
Enable GPU clock gating
hisilicon:
Vblank and other fixes"
* tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux: (1575 commits)
drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup
drm/nouveau/acpi: fix lockup with PCIe runtime PM
drm/nouveau/acpi: check for function 0x1B before using it
drm/nouveau/acpi: return supported DSM functions
drm/nouveau/acpi: ensure matching ACPI handle and supported functions
drm/nouveau/fbcon: fix font width not divisible by 8
drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize and resume events
drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vce
drm/amdgpu: add query device id and revision id into system info entry at CGS
drm/amdgpu: add new definition in bif header
drm/amd/powerplay: rename smum header guards
drm/amdgpu: enable UVD context buffer for older HW
drm/amdgpu: fix default UVD context size
drm/amdgpu: fix incorrect type of info_id
drm/amdgpu: make amdgpu_cgs_call_acpi_method as static
drm/amdgpu: comment out unused defaults_staturn_pro static const structure to fix the build
drm/amdgpu: enable UVD VM only on polaris
drm/amdgpu: increase timeout of IB test
drm/amdgpu: add destroy session when generate VCE destroy msg.
drm/amd: fix deadlock of job_list_lock V2
...
Refactor this function implementation so that the
drm_gem_object_unreference_unlocked() function will only be called once
in case of a failure according to the Linux coding style recommendation
for centralized exiting of functions.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
[seanpaul tweaked subject]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/4af34ce6-62c6-7966-1ae3-0877d5ac909d@users.sourceforge.net
The functions drm_gem_object_unreference_unlocked() and vunmap() perform
also input parameter validation.
Thus the tests around their calls are not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
[seanpaul tweaked subject]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/9638cd74-ffc5-d9ee-a40c-9b60e860ad8b@users.sourceforge.net
etnaviv-next only contains two patches to get rid of a confusing error
message and finally one patch to enable the autonomous GPU clock gating.
* 'drm-etnaviv-next' of git://git.pengutronix.de/git/lst/linux:
drm/etnaviv: remove generic GPU init failure reporting
drm/etnaviv: improve error reporting in GPU init path
drm/etnaviv: enable GPU module level clock gating support
The GPU init path now reports any errors which might occur more accurately
than what is possible with the generic "something failed" message.
Remove the generic reporting, so we don't log an error into dmesg anymore
if any of the GPU cores are ignored.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Print error messages that mention the exact cause of the failure on
all paths which may fail the GPU init.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Enable GPU module level hardware clock gating, using the conditions
found in the galcore v5 driver.
v2 lst: Split out clock gating enable into separate function, as
there might be more conditions needed for new hardware.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXcHi9AAoJEHm+PkMAQRiGSJ0H/2o4t9VWYmhyPC1sdIHoCExJ
P4tBrcZYBmKcsOmIfnJDa5g/+IdhouEUM0v0fHPogS2UUWT9eRuJWYD3sY+HpEQ+
heKTli8X73gsFB25odeIbIt0jAoSiiMYWDrWqLNsuUV1tjEYVA8rH0SM94FiOC/5
7WVWXLTuH+Rm7JHP18BnKxmMMbzrTFmwisLMqFKyfZRRSlS+/ix7iLUNO9AFa39B
YHxNPihLrZ0oONyCOAQoHTIXXrw0cQbxV2utg3vnMcCZdme2xOn+iXMntTSKfZ39
iC9/T0vsO3R6OrRo2aDZAnCPUAniXnMEIhrKG37WMyXpj6cucZ/2QiNXcXviGV4=
=iLte
-----END PGP SIGNATURE-----
Back-merge tag 'v4.7-rc5' into drm-next
Linux 4.7-rc5
The fsl-dcu pull needs -rc3 so go to -rc5 for now.
We already have a fallback in place to fill out the unique from
dev->unique, which is set to something reasonable in drm_dev_alloc.
Which means we only need to have a special set_busid for pci devices,
to be able to care the backwards compat code for drm 1.1 around, which
libdrm still needs.
While developing and testing this patch things blew up in really
interesting ways, and the code is rather confusing in naming things
between the kernel code, ioctl #defines and libdrm. For the next brave
dragon slayer, document all this madness properly in the userspace
interface section of gpu.tmpl.
v2: Make drm_dev_set_unique static and update kerneldoc.
v3: Entire rewrite, plus document what's going on for posterity in the
gpu docbook uapi section.
v4: Drop accidental amdgpu hunk (Emil).
v5: Drop accidental omapdrm vblank counter change (Emil).
v6: Rebase on top of the sphinx conversion.
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> (virt_gpu)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Since d16e0faab9 (iommu: Allow selecting page sizes per domain) the
iommu core demands the page size to be set per domain, otherwise any
mapping attempts will be dropped. Make sure to set a valid page size
for the etnaviv iommu.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Fence contexts are created on the fly (for example) by the GPU scheduler used
in the amdgpu driver as a result of an userspace request. Because of this
userspace could in theory force a wrap around of the 32bit context number
if it doesn't behave well.
Avoid this by increasing the context number to 64bits. This way even when
userspace manages to allocate a billion contexts per second it takes more
than 500 years for the context number to wrap around.
v2: fix printf formats as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464786612-5010-2-git-send-email-deathsimple@vodafone.de
Pull drm updates from Dave Airlie:
"Here's the main drm pull request for 4.7, it's been a busy one, and
I've been a bit more distracted in real life this merge window. Lots
more ARM drivers, not sure if it'll ever end. I think I've at least
one more coming the next merge window.
But changes are all over the place, support for AMD Polaris GPUs is in
here, some missing GM108 support for nouveau (found in some Lenovos),
a bunch of MST and skylake fixes.
I've also noticed a few fixes from Arnd in my inbox, that I'll try and
get in asap, but I didn't think they should hold this up.
New drivers:
- Hisilicon kirin display driver
- Mediatek MT8173 display driver
- ARC PGU - bitstreamer on Synopsys ARC SDP boards
- Allwinner A13 initial RGB output driver
- Analogix driver for DisplayPort IP found in exynos and rockchip
DRM Core:
- UAPI headers fixes and C++ safety
- DRM connector reference counting
- DisplayID mode parsing for Dell 5K monitors
- Removal of struct_mutex from drivers
- Connector registration cleanups
- MST robustness fixes
- MAINTAINERS updates
- Lockless GEM object freeing
- Generic fbdev deferred IO support
panel:
- Support for a bunch of new panels
i915:
- VBT refactoring
- PLL computation cleanups
- DSI support for BXT
- Color manager support
- More atomic patches
- GEM improvements
- GuC fw loading fixes
- DP detection fixes
- SKL GPU hang fixes
- Lots of BXT fixes
radeon/amdgpu:
- Initial Polaris support
- GPUVM/Scheduler/Clock/Power improvements
- ASYNC pageflip support
- New mesa feature support
nouveau:
- GM108 support
- Power sensor support improvements
- GR init + ucode fixes.
- Use GPU provided topology information
vmwgfx:
- Add host messaging support
gma500:
- Some cleanups and fixes
atmel:
- Bridge support
- Async atomic commit support
fsl-dcu:
- Timing controller for LCD support
- Pixel clock polarity support
rcar-du:
- Misc fixes
exynos:
- Pipeline clock support
- Exynoss4533 SoC support
- HW trigger mode support
- export HDMI_PHY clock
- DECON5433 fixes
- Use generic prime functions
- use DMA mapping APIs
rockchip:
- Lots of little fixes
vc4:
- Render node support
- Gamma ramp support
- DPI output support
msm:
- Mostly cleanups and fixes
- Conversion to generic struct fence
etnaviv:
- Fix for prime buffer handling
- Allow hangcheck to be coalesced with other wakeups
tegra:
- Gamme table size fix"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1050 commits)
drm/edid: add displayid detailed 1 timings to the modelist. (v1.1)
drm/edid: move displayid validation to it's own function.
drm/displayid: Iterate over all DisplayID blocks
drm/edid: move displayid tiled block parsing into separate function.
drm: Nuke ->vblank_disable_allowed
drm/vmwgfx: Report vmwgfx version to vmware.log
drm/vmwgfx: Add VMWare host messaging capability
drm/vmwgfx: Kill some lockdep warnings
drm/nouveau/gr/gf100-: fix race condition in fecs/gpccs ucode
drm/nouveau/core: recognise GM108 chipsets
drm/nouveau/gr/gm107-: fix touching non-existent ppcs in attrib cb setup
drm/nouveau/gr/gk104-: share implementation of ppc exception init
drm/nouveau/gr/gk104-: move rop_active_fbps init to nonctx
drm/nouveau/bios/pll: check BIT table version before trying to parse it
drm/nouveau/bios/pll: prevent oops when limits table can't be parsed
drm/nouveau/volt/gk104: round up in gk104_volt_set
drm/nouveau/fb/gm200: setup mmu debug buffer registers at init()
drm/nouveau/fb/gk20a,gm20b: setup mmu debug buffer registers at init()
drm/nouveau/fb/gf100-: allocate mmu debug buffers
drm/nouveau/fb: allow chipset-specific actions for oneinit()
...
Here's the big staging and iio driver update for 4.7-rc1.
I think we almost broke even with this release, only adding a few more
lines than we removed, which isn't bad overall given that there's a
bunch of new iio drivers added. The Lustre developers seem to have
woken up from their sleep and have been doing a great job in cleaning up
the code and pruning unused or old cruft, the filesystem is almost
readable :)
Other than that, just a lot of basic coding style cleanups in the churn.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlc/00QACgkQMUfUDdst+ynXYQCdG9oEsw4CCItbjGfQau5YVGbd
TOcAnA19tZz+Wcg3sLT8Zsm979dgVvDt
=9UG/
-----END PGP SIGNATURE-----
Merge tag 'staging-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver updates from Greg KH:
"Here's the big staging and iio driver update for 4.7-rc1.
I think we almost broke even with this release, only adding a few more
lines than we removed, which isn't bad overall given that there's a
bunch of new iio drivers added.
The Lustre developers seem to have woken up from their sleep and have
been doing a great job in cleaning up the code and pruning unused or
old cruft, the filesystem is almost readable :)
Other than that, just a lot of basic coding style cleanups in the
churn. All have been in linux-next for a while with no reported
issues"
* tag 'staging-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (938 commits)
Staging: emxx_udc: emxx_udc: fixed coding style issue
staging/gdm724x: fix "alignment should match open parenthesis" issues
staging/gdm724x: Fix avoid CamelCase
staging: unisys: rename misleading var ii with frag
staging: unisys: visorhba: switch success handling to error handling
staging: unisys: visorhba: main path needs to flow down the left margin
staging: unisys: visorinput: handle_locking_key() simplifications
staging: unisys: visorhba: fail gracefully for thread creation failures
staging: unisys: visornic: comment restructuring and removing bad diction
staging: unisys: fix format string %Lx to %llx for u64
staging: unisys: remove unused struct members
staging: unisys: visorchannel: correct variable misspelling
staging: unisys: visorhba: replace functionlike macro with function
staging: dgnc: Need to check for NULL of ch
staging: dgnc: remove redundant condition check
staging: dgnc: fix 'line over 80 characters'
staging: dgnc: clean up the dgnc_get_modem_info()
staging: lustre: lnet: enable configuration per NI interface
staging: lustre: o2iblnd: properly set ibr_why
staging: lustre: o2iblnd: remove last of kiblnd_tunables_fini
...
drm_gem_object_lookup() has never required the drm_device for its file
local translation of the user handle to the GEM object. Let's remove the
unused parameter and save some space.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: dri-devel@lists.freedesktop.org
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Fixup kerneldoc too.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
