The Linux TSC calibration procedure is subject to small variations
(its common to see +-1 kHz difference between reboots on a given CPU, for example).
So migrating a guest between two hosts with identical processor can fail, in case
of a small variation in calibrated TSC between them.
Without TSC scaling, the current kernel interface will either return an error
(if user_tsc_khz <= tsc_khz) or enable TSC catchup mode.
This change enables the following TSC tolerance check to
accept KVM_SET_TSC_KHZ within tsc_tolerance_ppm (which is 250ppm by default).
/*
* Compute the variation in TSC rate which is acceptable
* within the range of tolerance and decide if the
* rate being applied is within that bounds of the hardware
* rate. If so, no scaling or compensation need be done.
*/
thresh_lo = adjust_tsc_khz(tsc_khz, -tsc_tolerance_ppm);
thresh_hi = adjust_tsc_khz(tsc_khz, tsc_tolerance_ppm);
if (user_tsc_khz < thresh_lo || user_tsc_khz > thresh_hi) {
pr_debug("kvm: requested TSC rate %u falls outside tolerance [%u,%u]\n", user_tsc_khz, thresh_lo, thresh_hi);
use_scaling = 1;
}
NTP daemon in the guest can correct this difference (NTP can correct upto 500ppm).
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20200616114741.GA298183@fuller.cnet>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only MSR address range 0x800 through 0x8ff is architecturally reserved
and dedicated for accessing APIC registers in x2APIC mode.
Fixes: 0105d1a526 ("KVM: x2apic interface to lapic")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200616073307.16440-1-xiaoyao.li@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
__kvm_set_memory_region does not use the hva at all, so trying to
catch use-after-delete is pointless and, worse, it fails access_ok
now that we apply it to all memslots including private kernel ones.
This fixes an AVIC regression.
Fixes: 09d952c971 ("KVM: check userspace_addr for all memslots")
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'Page not present' event may or may not get injected depending on
guest's state. If the event wasn't injected, there is no need to
inject the corresponding 'page ready' event as the guest may get
confused. E.g. Linux thinks that the corresponding 'page not present'
event wasn't delivered *yet* and allocates a 'dummy entry' for it.
This entry is never freed.
Note, 'wakeup all' events have no corresponding 'page not present'
event and always get injected.
s390 seems to always be able to inject 'page not present', the
change is effectively a nop.
Suggested-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610175532.779793-2-vkuznets@redhat.com>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=208081
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When userspace configures KVM_GUESTDBG_SINGLESTEP, KVM will manage the
presence of X86_EFLAGS_TF via kvm_set/get_rflags on vcpus. The actual
rflag bit is therefore hidden from callers.
That includes init_emulate_ctxt() which uses the value returned from
kvm_get_flags() to set ctxt->tf. As a result, x86_emulate_instruction()
will skip a single step, leaving singlestep_rip stale and not returning
to userspace.
This resolves the issue by observing the vcpu guest_debug configuration
alongside ctxt->tf in x86_emulate_instruction(), performing the single
step if set.
Cc: stable@vger.kernel.org
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Message-Id: <20200519081048.8204-1-felipe@nutanix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make x86_fpu_cache static now that FPU allocation and destruction is
handled entirely by common x86 code.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200608180218.20946-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit b1394e745b ("KVM: x86: fix APIC page invalidation") tried
to fix inappropriate APIC page invalidation by re-introducing arch
specific kvm_arch_mmu_notifier_invalidate_range() and calling it from
kvm_mmu_notifier_invalidate_range_start. However, the patch left a
possible race where the VMCS APIC address cache is updated *before*
it is unmapped:
(Invalidator) kvm_mmu_notifier_invalidate_range_start()
(Invalidator) kvm_make_all_cpus_request(kvm, KVM_REQ_APIC_PAGE_RELOAD)
(KVM VCPU) vcpu_enter_guest()
(KVM VCPU) kvm_vcpu_reload_apic_access_page()
(Invalidator) actually unmap page
Because of the above race, there can be a mismatch between the
host physical address stored in the APIC_ACCESS_PAGE VMCS field and
the host physical address stored in the EPT entry for the APIC GPA
(0xfee0000). When this happens, the processor will not trap APIC
accesses, and will instead show the raw contents of the APIC-access page.
Because Windows OS periodically checks for unexpected modifications to
the LAPIC register, this will show up as a BSOD crash with BugCheck
CRITICAL_STRUCTURE_CORRUPTION (109) we are currently seeing in
https://bugzilla.redhat.com/show_bug.cgi?id=1751017.
The root cause of the issue is that kvm_arch_mmu_notifier_invalidate_range()
cannot guarantee that no additional references are taken to the pages in
the range before kvm_mmu_notifier_invalidate_range_end(). Fortunately,
this case is supported by the MMU notifier API, as documented in
include/linux/mmu_notifier.h:
* If the subsystem
* can't guarantee that no additional references are taken to
* the pages in the range, it has to implement the
* invalidate_range() notifier to remove any references taken
* after invalidate_range_start().
The fix therefore is to reload the APIC-access page field in the VMCS
from kvm_mmu_notifier_invalidate_range() instead of ..._range_start().
Cc: stable@vger.kernel.org
Fixes: b1394e745b ("KVM: x86: fix APIC page invalidation")
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=197951
Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Message-Id: <20200606042627.61070-1-eiichi.tsukata@nutanix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
handle_vmptrst()/handle_vmread() stopped injecting #PF unconditionally
and switched to nested_vmx_handle_memory_failure() which just kills the
guest with KVM_EXIT_INTERNAL_ERROR in case of MMIO access, zeroing
'exception' in kvm_write_guest_virt_system() is not needed anymore.
This reverts commit 541ab2aeb2.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200605115906.532682-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Consolidate the code and correct the comments to show that the actions
taken to update existing mappings to disable or enable dirty logging
are not necessary when creating, moving, or deleting a memslot.
Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Message-Id: <1591128450-11977-4-git-send-email-anthony.yznaga@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On large memory guests it has been observed that creating a memslot
for a very large range can take noticeable amount of time.
Investigation showed that the time is spent walking the rmaps to update
existing sptes to remove write access or set/clear dirty bits to support
dirty logging. These rmap walks are unnecessary when creating or moving
a memslot. A newly created memslot will not have any existing mappings,
and the existing mappings of a moved memslot will have been invalidated
and flushed. Any mappings established once the new/moved memslot becomes
visible will be set using the properties of the new slot.
Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Message-Id: <1591128450-11977-3-git-send-email-anthony.yznaga@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no write access to remove. An existing memslot cannot be updated
to set or clear KVM_MEM_READONLY, and any mappings established in a newly
created or moved read-only memslot will already be read-only.
Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Message-Id: <1591128450-11977-2-git-send-email-anthony.yznaga@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for Hyper-V synthetic debugger (syndbg) interface.
The syndbg interface is using MSRs to emulate a way to send/recv packets
data.
The debug transport dll (kdvm/kdnet) will identify if Hyper-V is enabled
and if it supports the synthetic debugger interface it will attempt to
use it, instead of trying to initialize a network adapter.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200529134543.1127440-4-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel CPUs have a new alternative MSR range (starting from MSR_IA32_PMC0)
for GP counters that allows writing the full counter width. Enable this
range from a new capability bit (IA32_PERF_CAPABILITIES.FW_WRITE[bit 13]).
The guest would query CPUID to get the counter width, and sign extends
the counter values as needed. The traditional MSRs always limit to 32bit,
even though the counter internally is larger (48 or 57 bits).
When the new capability is set, use the alternative range which do not
have these restrictions. This lowers the overhead of perf stat slightly
because it has to do less interrupts to accumulate the counter value.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20200529074347.124619-3-like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change kvm_pmu_get_msr() to get the msr_data struct, as the host_initiated
field from the struct could be used by get_msr. This also makes this API
consistent with kvm_pmu_set_msr. No functional changes.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Message-Id: <20200529074347.124619-2-like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce new capability to indicate that KVM supports interrupt based
delivery of 'page ready' APF events. This includes support for both
MSR_KVM_ASYNC_PF_INT and MSR_KVM_ASYNC_PF_ACK.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200525144125.143875-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If two page ready notifications happen back to back the second one is not
delivered and the only mechanism we currently have is
kvm_check_async_pf_completion() check in vcpu_run() loop. The check will
only be performed with the next vmexit when it happens and in some cases
it may take a while. With interrupt based page ready notification delivery
the situation is even worse: unlike exceptions, interrupts are not handled
immediately so we must check if the slot is empty. This is slow and
unnecessary. Introduce dedicated MSR_KVM_ASYNC_PF_ACK MSR to communicate
the fact that the slot is free and host should check its notification
queue. Mandate using it for interrupt based 'page ready' APF event
delivery.
As kvm_check_async_pf_completion() is going away from vcpu_run() we need
a way to communicate the fact that vcpu->async_pf.done queue has
transitioned from empty to non-empty state. Introduce
kvm_arch_async_page_present_queued() and KVM_REQ_APF_READY to do the job.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200525144125.143875-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Concerns were expressed around APF delivery via synthetic #PF exception as
in some cases such delivery may collide with real page fault. For 'page
ready' notifications we can easily switch to using an interrupt instead.
Introduce new MSR_KVM_ASYNC_PF_INT mechanism and deprecate the legacy one.
One notable difference between the two mechanisms is that interrupt may not
get handled immediately so whenever we would like to deliver next event
(regardless of its type) we must be sure the guest had read and cleared
previous event in the slot.
While on it, get rid on 'type 1/type 2' names for APF events in the
documentation as they are causing confusion. Use 'page not present'
and 'page ready' everywhere instead.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200525144125.143875-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An innocent reader of the following x86 KVM code:
bool kvm_arch_can_inject_async_page_present(struct kvm_vcpu *vcpu)
{
if (!(vcpu->arch.apf.msr_val & KVM_ASYNC_PF_ENABLED))
return true;
...
may get very confused: if APF mechanism is not enabled, why do we report
that we 'can inject async page present'? In reality, upon injection
kvm_arch_async_page_present() will check the same condition again and,
in case APF is disabled, will just drop the item. This is fine as the
guest which deliberately disabled APF doesn't expect to get any APF
notifications.
Rename kvm_arch_can_inject_async_page_present() to
kvm_arch_can_dequeue_async_page_present() to make it clear what we are
checking: if the item can be dequeued (meaning either injected or just
dropped).
On s390 kvm_arch_can_inject_async_page_present() always returns 'true' so
the rename doesn't matter much.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200525144125.143875-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, APF mechanism relies on the #PF abuse where the token is being
passed through CR2. If we switch to using interrupts to deliver page-ready
notifications we need a different way to pass the data. Extent the existing
'struct kvm_vcpu_pv_apf_data' with token information for page-ready
notifications.
While on it, rename 'reason' to 'flags'. This doesn't change the semantics
as we only have reasons '1' and '2' and these can be treated as bit flags
but KVM_PV_REASON_PAGE_READY is going away with interrupt based delivery
making 'reason' name misleading.
The newly introduced apf_put_user_ready() temporary puts both flags and
token information, this will be changed to put token only when we switch
to interrupt based notifications.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200525144125.143875-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 9a6e7c3981 (""KVM: async_pf: Fix #DF due to inject "Page not
Present" and "Page Ready" exceptions simultaneously") added a protection
against 'page ready' notification coming before 'page not present' is
delivered. This situation seems to be impossible since commit 2a266f2355
("KVM MMU: check pending exception before injecting APF) which added
'vcpu->arch.exception.pending' check to kvm_can_do_async_pf.
On x86, kvm_arch_async_page_present() has only one call site:
kvm_check_async_pf_completion() loop and we only enter the loop when
kvm_arch_can_inject_async_page_present(vcpu) which when async pf msr
is enabled, translates into kvm_can_do_async_pf().
There is also one problem with the cancellation mechanism. We don't seem
to check that the 'page not present' notification we're canceling matches
the 'page ready' notification so in theory, we may erroneously drop two
valid events.
Revert the commit.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200525144125.143875-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to VMX, the state that is captured through the currently available
IOCTLs is a mix of L1 and L2 state, dependent on whether the L2 guest was
running at the moment when the process was interrupted to save its state.
In particular, the SVM-specific state for nested virtualization includes
the L1 saved state (including the interrupt flag), the cached L2 controls,
and the GIF.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows exceptions injected by the emulator to be properly delivered
as vmexits. The code also becomes simpler, because we can just let all
L0-intercepted exceptions go through the usual path. In particular, our
emulation of the VMX #DB exit qualification is very much simplified,
because the vmexit injection path can use kvm_deliver_exception_payload
to update DR6.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case an interrupt arrives after nested.check_events but before the
call to kvm_cpu_has_injectable_intr, we could end up enabling the interrupt
window even if the interrupt is actually going to be a vmexit. This is
useless rather than harmful, but it really complicates reasoning about
SVM's handling of the VINTR intercept. We'd like to never bother with
the VINTR intercept if V_INTR_MASKING=1 && INTERCEPT_INTR=1, because in
that case there is no interrupt window and we can just exit the nested
guest whenever we want.
This patch moves the opening of the interrupt window inside
inject_pending_event. This consolidates the check for pending
interrupt/NMI/SMI in one place, and makes KVM's usage of immediate
exits more consistent, extending it beyond just nested virtualization.
There are two functional changes here. They only affect corner cases,
but overall they simplify the inject_pending_event.
- re-injection of still-pending events will also use req_immediate_exit
instead of using interrupt-window intercepts. This should have no impact
on performance on Intel since it simply replaces an interrupt-window
or NMI-window exit for a preemption-timer exit. On AMD, which has no
equivalent of the preemption time, it may incur some overhead but an
actual effect on performance should only be visible in pathological cases.
- kvm_arch_interrupt_allowed and kvm_vcpu_has_events will return true
if an interrupt, NMI or SMI is blocked by nested_run_pending. This
makes sense because entering the VM will allow it to make progress
and deliver the event.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of calling kvm_event_needs_reinjection, track its
future return value in a variable. This will be useful in
the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initialize vcpu->arch.tdp_level during vCPU creation to avoid consuming
garbage if userspace calls KVM_RUN without first calling KVM_SET_CPUID.
Fixes: e93fd3b3e8 ("KVM: x86/mmu: Capture TDP level when updating CPUID")
Reported-by: syzbot+904752567107eefb728c@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200527085400.23759-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pic_in_kernel(), ioapic_in_kernel() and irqchip_kernel() have the
same implementation.
Signed-off-by: Peng Hao <richard.peng@oppo.com>
Message-Id: <HKAPR02MB4291D5926EA10B8BFE9EA0D3E0B70@HKAPR02MB4291.apcprd02.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is a bad indentation in next&queue branch. The patch looks like
fixes nothing though it fixes the indentation.
Before fixing:
if (!handle_fastpath_set_x2apic_icr_irqoff(vcpu, data)) {
kvm_skip_emulated_instruction(vcpu);
ret = EXIT_FASTPATH_EXIT_HANDLED;
}
break;
case MSR_IA32_TSCDEADLINE:
After fixing:
if (!handle_fastpath_set_x2apic_icr_irqoff(vcpu, data)) {
kvm_skip_emulated_instruction(vcpu);
ret = EXIT_FASTPATH_EXIT_HANDLED;
}
break;
case MSR_IA32_TSCDEADLINE:
Signed-off-by: Haiwei Li <lihaiwei@tencent.com>
Message-Id: <2f78457e-f3a7-3bc9-e237-3132ee87f71e@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove unnecessary brackets from a case statement that unintentionally
encapsulates unrelated case statements in the same switch statement.
While technically legal and functionally correct syntax, the brackets
are visually confusing and potentially dangerous, e.g. the last of the
encapsulated case statements has an undocumented fall-through that isn't
flagged by compilers due the encapsulation.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200218234012.7110-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The migration functionality was left incomplete in commit 5ef8acbdd6
("KVM: nVMX: Emulate MTF when performing instruction emulation", 2020-02-23),
fix it.
Fixes: 5ef8acbdd6 ("KVM: nVMX: Emulate MTF when performing instruction emulation")
Cc: stable@vger.kernel.org
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This msr is only available when the host supports WAITPKG feature.
This breaks a nested guest, if the L1 hypervisor is set to ignore
unknown msrs, because the only other safety check that the
kernel does is that it attempts to read the msr and
rejects it if it gets an exception.
Cc: stable@vger.kernel.org
Fixes: 6e3ba4abce ("KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200523161455.3940-3-mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bank_num is a one-based count of banks, not a zero-based index. It
overflows the allocated space only when strictly greater than
KVM_MAX_MCE_BANKS.
Fixes: a9e38c3e01 ("KVM: x86: Catch potential overrun in MCE setup")
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20200511225616.19557-1-jmattson@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Two new stats for exposing halt-polling cpu usage:
halt_poll_success_ns
halt_poll_fail_ns
Thus sum of these 2 stats is the total cpu time spent polling. "success"
means the VCPU polled until a virtual interrupt was delivered. "fail"
means the VCPU had to schedule out (either because the maximum poll time
was reached or it needed to yield the CPU).
To avoid touching every arch's kvm_vcpu_stat struct, only update and
export halt-polling cpu usage stats if we're on x86.
Exporting cpu usage as a u64 and in nanoseconds means we will overflow at
~500 years, which seems reasonably large.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jon Cargille <jcargill@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200508182240.68440-1-jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements a fast path for emulation of writes to the TSCDEADLINE
MSR. Besides shortcutting various housekeeping tasks in the vCPU loop,
the fast path can also deliver the timer interrupt directly without going
through KVM_REQ_PENDING_TIMER because it runs in vCPU context.
Tested-by: Haiwei Li <lihaiwei@tencent.com>
Cc: Haiwei Li <lihaiwei@tencent.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1588055009-12677-7-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adds a fastpath_t typedef since enum lines are a bit long, and replace
EXIT_FASTPATH_SKIP_EMUL_INS with two new exit_fastpath_completion enum values.
- EXIT_FASTPATH_EXIT_HANDLED kvm will still go through it's full run loop,
but it would skip invoking the exit handler.
- EXIT_FASTPATH_REENTER_GUEST complete fastpath, guest can be re-entered
without invoking the exit handler or going
back to vcpu_run
Tested-by: Haiwei Li <lihaiwei@tencent.com>
Cc: Haiwei Li <lihaiwei@tencent.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1588055009-12677-4-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce kvm_vcpu_exit_request() helper, we need to check some conditions
before enter guest again immediately, we skip invoking the exit handler and
go through full run loop if complete fastpath but there is stuff preventing
we enter guest again immediately.
Tested-by: Haiwei Li <lihaiwei@tencent.com>
Cc: Haiwei Li <lihaiwei@tencent.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1588055009-12677-5-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The index returned by kvm_async_pf_gfn_slot() will be removed when an
async pf gfn is going to be removed. However kvm_async_pf_gfn_slot()
is not reliable in that it can return the last key it loops over even
if the gfn is not found in the async gfn array. It should never
happen, but it's still better to sanity check against that to make
sure no unexpected gfn will be removed.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200416155910.267514-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Forcing the ASYNC_PF_PER_VCPU to be power of two is much easier to be
used rather than calling roundup_pow_of_two() from time to time. Do
this by adding a BUILD_BUG_ON() inside the hash function.
Another point is that generally async pf does not allow concurrency
over ASYNC_PF_PER_VCPU after all (see kvm_setup_async_pf()), so it
does not make much sense either to have it not a power of two or some
of the entries will definitely be wasted.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200416155859.267366-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace KVM's PT_PAGE_TABLE_LEVEL, PT_DIRECTORY_LEVEL and PT_PDPE_LEVEL
with the kernel's PG_LEVEL_4K, PG_LEVEL_2M and PG_LEVEL_1G. KVM's
enums are borderline impossible to remember and result in code that is
visually difficult to audit, e.g.
if (!enable_ept)
ept_lpage_level = 0;
else if (cpu_has_vmx_ept_1g_page())
ept_lpage_level = PT_PDPE_LEVEL;
else if (cpu_has_vmx_ept_2m_page())
ept_lpage_level = PT_DIRECTORY_LEVEL;
else
ept_lpage_level = PT_PAGE_TABLE_LEVEL;
versus
if (!enable_ept)
ept_lpage_level = 0;
else if (cpu_has_vmx_ept_1g_page())
ept_lpage_level = PG_LEVEL_1G;
else if (cpu_has_vmx_ept_2m_page())
ept_lpage_level = PG_LEVEL_2M;
else
ept_lpage_level = PG_LEVEL_4K;
No functional change intended.
Suggested-by: Barret Rhoden <brho@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200428005422.4235-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vcpu->arch.guest_xstate_size lost its only user since commit df1daba7d1
("KVM: x86: support XSAVES usage in the host"), so clean it up.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200429154312.1411-1-xiaoyao.li@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Save L1's TSC offset in 'struct kvm_vcpu_arch' and drop the kvm_x86_ops
hook read_l1_tsc_offset(). This avoids a retpoline (when configured)
when reading L1's effective TSC, which is done at least once on every
VM-Exit.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200502043234.12481-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an argument to interrupt_allowed and nmi_allowed, to checking if
interrupt injection is blocked. Use the hook to handle the case where
an interrupt arrives between check_nested_events() and the injection
logic. Drop the retry of check_nested_events() that hack-a-fixed the
same condition.
Blocking injection is also a bit of a hack, e.g. KVM should do exiting
and non-exiting interrupt processing in a single pass, but it's a more
precise hack. The old comment is also misleading, e.g. KVM_REQ_EVENT is
purely an optimization, setting it on every run loop (which KVM doesn't
do) should not affect functionality, only performance.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-13-sean.j.christopherson@intel.com>
[Extend to SVM, add SMI and NMI. Even though NMI and SMI cannot come
asynchronously right now, making the fix generic is easy and removes a
special case. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN if a pending exception is coincident with an injected exception
before calling check_nested_events() so that the WARN will fire even if
inject_pending_event() bails early because check_nested_events() detects
the conflict. Bailing early isn't problematic (quite the opposite), but
suppressing the WARN is undesirable as it could mask a bug elsewhere in
KVM.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-11-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not hardcode is_smm so that all the architectural conditions for
blocking SMIs are listed in a single place. Well, in two places because
this introduces some code duplication between Intel and AMD.
This ensures that nested SVM obeys GIF in kvm_vcpu_has_events.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Re-request KVM_REQ_EVENT if vcpu_enter_guest() bails after processing
pending requests and an immediate exit was requested. This fixes a bug
where a pending event, e.g. VMX preemption timer, is delayed and/or lost
if the exit was deferred due to something other than a higher priority
_injected_ event, e.g. due to a pending nested VM-Enter. This bug only
affects the !injected case as kvm_x86_ops.cancel_injection() sets
KVM_REQ_EVENT to redo the injection, but that's purely serendipitous
behavior with respect to the deferred event.
Note, emulated preemption timer isn't the only event that can be
affected, it simply happens to be the only event where not re-requesting
KVM_REQ_EVENT is blatantly visible to the guest.
Fixes: f4124500c2 ("KVM: nVMX: Fully emulate preemption timer")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a kvm_x86_ops hook to detect a nested pending "hypervisor timer" and
use it to effectively open a window for servicing the expired timer.
Like pending SMIs on VMX, opening a window simply means requesting an
immediate exit.
This fixes a bug where an expired VMX preemption timer (for L2) will be
delayed and/or lost if a pending exception is injected into L2. The
pending exception is rightly prioritized by vmx_check_nested_events()
and injected into L2, with the preemption timer left pending. Because
no window opened, L2 is free to run uninterrupted.
Fixes: f4124500c2 ("KVM: nVMX: Fully emulate preemption timer")
Reported-by: Jim Mattson <jmattson@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Peter Shier <pshier@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-3-sean.j.christopherson@intel.com>
[Check it in kvm_vcpu_has_events too, to ensure that the preemption
timer is serviced promptly even if the vCPU is halted and L1 is not
intercepting HLT. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Though rdpkru and wrpkru are contingent upon CR4.PKE, the PKRU
resource isn't. It can be read with XSAVE and written with XRSTOR.
So, if we don't set the guest PKRU value here(kvm_load_guest_xsave_state),
the guest can read the host value.
In case of kvm_load_host_xsave_state, guest with CR4.PKE clear could
potentially use XRSTOR to change the host PKRU value.
While at it, move pkru state save/restore to common code and the
host_pkru field to kvm_vcpu_arch. This will let SVM support protection keys.
Cc: stable@vger.kernel.org
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <158932794619.44260.14508381096663848853.stgit@naples-babu.amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The commit 64b5bd2704 ("KVM: nSVM: ignore L1 interrupt window
while running L2 with V_INTR_MASKING=1") introduced a WARN_ON,
which checks if AVIC is enabled when trying to set V_IRQ
in the VMCB for enabling irq window.
The following warning is triggered because the requesting vcpu
(to deactivate AVIC) does not get to process APICv update request
for itself until the next #vmexit.
WARNING: CPU: 0 PID: 118232 at arch/x86/kvm/svm/svm.c:1372 enable_irq_window+0x6a/0xa0 [kvm_amd]
RIP: 0010:enable_irq_window+0x6a/0xa0 [kvm_amd]
Call Trace:
kvm_arch_vcpu_ioctl_run+0x6e3/0x1b50 [kvm]
? kvm_vm_ioctl_irq_line+0x27/0x40 [kvm]
? _copy_to_user+0x26/0x30
? kvm_vm_ioctl+0xb3e/0xd90 [kvm]
? set_next_entity+0x78/0xc0
kvm_vcpu_ioctl+0x236/0x610 [kvm]
ksys_ioctl+0x8a/0xc0
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x58/0x210
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes by sending APICV update request to all other vcpus, and
immediately update APIC for itself.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lkml.org/lkml/2020/5/2/167
Fixes: 64b5bd2704 ("KVM: nSVM: ignore L1 interrupt window while running L2 with V_INTR_MASKING=1")
Message-Id: <1588818939-54264-1-git-send-email-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows making request to all other vcpus except the one
specified in the parameter.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <1588771076-73790-2-git-send-email-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
