Some .gitignore files have comments like "Generated files",
"Ignore generated files" at the header part, but they are
too obvious.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor Makefile.dtbinst so it looks similar to other Makefiles.
*.dtb should not be a phony target. Copy files based on the timestamps.
Print installed dtb paths instead of in-kernel dtb paths.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The 'dtbinst_root' is used to remember the root of the in-kernel dts
directory (i.e. arch/*/boot/dts), but it looks clumsy.
I prefer using two variables 'obj' and 'dst' to track the in-kernel
directory and the install destination, respectively.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In the process of creating the source file of a module modpost injects a
set of includes that are not required if the compilation unit is
statically built into the kernel.
The order of inclusion of the headers can cause redefinition problems
(e.g.):
In file included from include/linux/elf.h:5:0,
from include/linux/module.h:18,
from crypto/arc4.mod.c:2:
#define ELF_OSABI ELFOSABI_LINUX
In file included from include/linux/elfnote.h:62:0,
from include/linux/build-salt.h:4,
from crypto/arc4.mod.c:1:
include/uapi/linux/elf.h:363:0: note: this is the location of
the previous definition
#define ELF_OSABI ELFOSABI_NONE
The issue was exposed during the development of the series [1].
[1] https://lore.kernel.org/lkml/20200306133242.26279-1-vincenzo.frascino@arm.com/
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Link: https://lkml.kernel.org/r/20200320145351.32292-17-vincenzo.frascino@arm.com
- fix __uint128_t capability test in Kconfig when GCC that defaults
to 32-bit is used to build the 64-bit kernel
- suppress new noisy Clang warnings -Wpointer-to-enum-cast
- move the namespace field in Module.symvers for the backward
compatibility reason for the depmod tool
- use available compression for initramdisk when INTRAMFS_SOURCE
is defined, which was the original behavior
- fix modpost to handle correct large section numbers when it refers
to modversion CRCs and module namespaces
- fix comments and documents
-----BEGIN PGP SIGNATURE-----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=JTWI
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix __uint128_t capability test in Kconfig when GCC that defaults to
32-bit is used to build the 64-bit kernel
- suppress new noisy Clang warnings -Wpointer-to-enum-cast
- move the namespace field in Module.symvers for the backward
compatibility reason for the depmod tool
- use available compression for initramdisk when INTRAMFS_SOURCE is
defined, which was the original behavior
- fix modpost to handle correct large section numbers when it refers to
modversion CRCs and module namespaces
- fix comments and documents
* tag 'kbuild-fixes-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
scripts/kallsyms: fix wrong kallsyms_relative_base
modpost: Get proper section index by get_secindex() instead of st_shndx
initramfs: restore default compression behavior
modpost: move the namespace field in Module.symvers last
kbuild: Disable -Wpointer-to-enum-cast
kbuild: doc: fix references to other documents
int128: fix __uint128_t compiler test in Kconfig
kconfig: introduce m32-flag and m64-flag
kbuild: Fix inconsistent comment
There is the code in the read_symbol function in 'scripts/kallsyms.c':
if (is_ignored_symbol(name, type))
return NULL;
/* Ignore most absolute/undefined (?) symbols. */
if (strcmp(name, "_text") == 0)
_text = addr;
But the is_ignored_symbol function returns true for name="_text" and
type='A'. So the next condition is not executed and the _text variable
is always zero.
It makes the wrong kallsyms_relative_base symbol as a result of the code
(CONFIG_KALLSYMS_BASE_RELATIVE is defined):
if (base_relative) {
output_label("kallsyms_relative_base");
output_address(relative_base);
printf("\n");
}
Because the output_address function uses the _text variable.
So the kallsyms_lookup function and all related functions in the kernel
do not work properly. For example, the stack trace in oops:
Call Trace:
[aa095e58] [809feab8] kobj_ns_ops_tbl+0x7ff09ac8/0x7ff1c1c4 (unreliable)
[aa095e98] [80002b64] kobj_ns_ops_tbl+0x7f50db74/0x80000010
[aa095ef8] [809c3d24] kobj_ns_ops_tbl+0x7feced34/0x7ff1c1c4
[aa095f28] [80002ed0] kobj_ns_ops_tbl+0x7f50dee0/0x80000010
[aa095f38] [8000f238] kobj_ns_ops_tbl+0x7f51a248/0x80000010
The right stack trace:
Call Trace:
[aa095e58] [809feab8] module_vdu_video_init+0x2fc/0x3bc (unreliable)
[aa095e98] [80002b64] do_one_initcall+0x40/0x1f0
[aa095ef8] [809c3d24] kernel_init_freeable+0x164/0x1d8
[aa095f28] [80002ed0] kernel_init+0x14/0x124
[aa095f38] [8000f238] ret_from_kernel_thread+0x14/0x1c
[masahiroy@kernel.org:
This issue happens on binutils <= 2.22
The following commit fixed it:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d2667025dd30611514810c28bee9709e4623012a
The symbol type of _text is 'T' on binutils >= 2.23
The minimal supported binutils version for the kernel build is 2.21
]
Signed-off-by: Mikhail Petrov <Mikhail.Petrov@mir.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Simplify gen_btf logic to make it work with llvm-objcopy. The existing
'file format' and 'architecture' parsing logic is brittle and does not
work with llvm-objcopy/llvm-objdump.
'file format' output of llvm-objdump>=11 will match GNU objdump, but
'architecture' (bfdarch) may not.
.BTF in .tmp_vmlinux.btf is non-SHF_ALLOC. Add the SHF_ALLOC flag
because it is part of vmlinux image used for introspection. C code
can reference the section via linker script defined __start_BTF and
__stop_BTF. This fixes a small problem that previous .BTF had the
SHF_WRITE flag (objcopy -I binary -O elf* synthesized .data).
Additionally, `objcopy -I binary` synthesized symbols
_binary__btf_vmlinux_bin_start and _binary__btf_vmlinux_bin_stop (not
used elsewhere) are replaced with more commonplace __start_BTF and
__stop_BTF.
Add 2>/dev/null because GNU objcopy (but not llvm-objcopy) warns
"empty loadable segment detected at vaddr=0xffffffff81000000, is this intentional?"
We use a dd command to change the e_type field in the ELF header from
ET_EXEC to ET_REL so that lld will accept .btf.vmlinux.bin.o. Accepting
ET_EXEC as an input file is an extremely rare GNU ld feature that lld
does not intend to support, because this is error-prone.
The output section description .BTF in include/asm-generic/vmlinux.lds.h
avoids potential subtle orphan section placement issues and suppresses
--orphan-handling=warn warnings.
Fixes: df786c9b94 ("bpf: Force .BTF section start to zero when dumping from vmlinux")
Fixes: cb0cc635c7 ("powerpc: Include .BTF section")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Stanislav Fomichev <sdf@google.com>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://github.com/ClangBuiltLinux/linux/issues/871
Link: https://lore.kernel.org/bpf/20200318222746.173648-1-maskray@google.com
Add uevent support to MHI bus so that the client drivers can be autoloaded
by udev when the MHI devices gets created. The client drivers are
expected to provide MODULE_DEVICE_TABLE with the MHI id_table struct so
that the alias can be exported.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Link: https://lore.kernel.org/r/20200220095854.4804-13-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(uint16_t) st_shndx is limited to 65535(i.e. SHN_XINDEX) so sym_get_data() gets
wrong section index by st_shndx if requested symbol contains extended section
index that is more than 65535. In this case, we need to get proper section index
by .symtab_shndx section.
Module.symvers generated by building kernel with "-ffunction-sections -fdata-sections"
shows the issue.
Fixes: 56067812d5 ("kbuild: modversions: add infrastructure for emitting relative CRCs")
Fixes: e84f9fbbec ("modpost: refactor namespace_from_kstrtabns() to not hard-code section name")
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently kconfig does not have a feature that allows to detect if the
used assembler supports a specific compilation option.
Introduce 'as-option' to serve this purpose in the context of Kconfig:
config X
def_bool $(as-option,...)
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: linux-kbuild@vger.kernel.org
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In order to preserve backwards compatability with kmod tools, we have to
move the namespace field in Module.symvers last, as the depmod -e -E
option looks at the first three fields in Module.symvers to check symbol
versions (and it's expected they stay in the original order of crc,
symbol, module).
In addition, update an ancient comment above read_dump() in modpost that
suggested that the export type field in Module.symvers was optional. I
suspect that there were historical reasons behind that comment that are
no longer accurate. We have been unconditionally printing the export
type since 2.6.18 (commit bd5cbcedf4), which is over a decade ago now.
Fix up read_dump() to treat each field as non-optional. I suspect the
original read_dump() code treated the export field as optional in order
to support pre <= 2.6.18 Module.symvers (which did not have the export
type field). Note that although symbol namespaces are optional, the
field will not be omitted from Module.symvers if a symbol does not have
a namespace. In this case, the field will simply be empty and the next
delimiter or end of line will follow.
Cc: stable@vger.kernel.org
Fixes: cb9b55d21f ("modpost: add support for symbol namespaces")
Tested-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-03-13
The following pull-request contains BPF updates for your *net-next* tree.
We've added 86 non-merge commits during the last 12 day(s) which contain
a total of 107 files changed, 5771 insertions(+), 1700 deletions(-).
The main changes are:
1) Add modify_return attach type which allows to attach to a function via
BPF trampoline and is run after the fentry and before the fexit programs
and can pass a return code to the original caller, from KP Singh.
2) Generalize BPF's kallsyms handling and add BPF trampoline and dispatcher
objects to be visible in /proc/kallsyms so they can be annotated in
stack traces, from Jiri Olsa.
3) Extend BPF sockmap to allow for UDP next to existing TCP support in order
in order to enable this for BPF based socket dispatch, from Lorenz Bauer.
4) Introduce a new bpftool 'prog profile' command which attaches to existing
BPF programs via fentry and fexit hooks and reads out hardware counters
during that period, from Song Liu. Example usage:
bpftool prog profile id 337 duration 3 cycles instructions llc_misses
4228 run_cnt
3403698 cycles (84.08%)
3525294 instructions # 1.04 insn per cycle (84.05%)
13 llc_misses # 3.69 LLC misses per million isns (83.50%)
5) Batch of improvements to libbpf, bpftool and BPF selftests. Also addition
of a new bpf_link abstraction to keep in particular BPF tracing programs
attached even when the applicaion owning them exits, from Andrii Nakryiko.
6) New bpf_get_current_pid_tgid() helper for tracing to perform PID filtering
and which returns the PID as seen by the init namespace, from Carlos Neira.
7) Refactor of RISC-V JIT code to move out common pieces and addition of a
new RV32G BPF JIT compiler, from Luke Nelson.
8) Add gso_size context member to __sk_buff in order to be able to know whether
a given skb is GSO or not, from Willem de Bruijn.
9) Add a new bpf_xdp_output() helper which reuses XDP's existing perf RB output
implementation but can be called from tracepoint programs, from Eelco Chaudron.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When compiling bpftool the following warning is found: "declaration of
'struct bpf_pidns_info' will not be visible outside of this function."
This patch adds struct bpf_pidns_info to type_fwds array to fix this.
Fixes: b4490c5c4e ("bpf: Added new helper bpf_get_ns_current_pid_tgid")
Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200313154650.13366-1-cneirabustos@gmail.com
This adds the following commits from upstream:
87a656ae5ff9 check: Inform about missing ranges
73d6e9ecb417 libfdt: fix undefined behaviour in fdt_splice_()
2525da3dba9b Bump version to v1.6.0
62cb4ad286ff Execute tests on FreeBSD with Cirrus CI
1f9a41750883 tests: Allow running the testsuite on already installed binary / libraries
c5995ddf4c20 tests: Honour NO_YAML make variable
e4ce227e89d7 tests: Properly clean up .bak file from tests
9b75292c335c tests: Honour $(NO_PYTHON) flag from Makefile in run_tests.sh
6c253afd07d4 Encode $(NO_PYTHON) consistently with other variables
95ec8ef706bd tests: No need to explicitly pass $PYTHON from Make to run_tests.sh
2b5f62d109a2 tests: Let run_tests.sh run Python tests without Makefile assistance
76b43dcbd18a checks: Add 'dma-ranges' check
e5c92a4780c6 libfdt: Use VALID_INPUT for FDT_ERR_BADSTATE checks
e5cc26b68bc0 libfdt: Add support for disabling internal checks
28fd7590aad2 libfdt: Improve comments in some of the assumptions
fc207c32341b libfdt: Fix a few typos
0f61c72dedc4 libfdt: Allow exclusion of fdt_check_full()
f270f45fd5d2 libfdt: Add support for disabling ordering check/fixup
c18bae9a4c96 libfdt: Add support for disabling version checks
fc03c4a2e04e libfdt: Add support for disabling rollback handling
77563ae72b7c libfdt: Add support for disabling sanity checks
57bc6327b80b libfdt: Add support for disabling dtb checks
464962489dcc Add a way to control the level of checks in the code
0c5326cb2845 libfdt: De-inline fdt_header_size()
cc6a5a071504 Revert "yamltree: Ensure consistent bracketing of properties with phandles"
0e9225eb0dfe Remove redundant YYLOC global declaration
cab09eedd644 Move -DNO_VALGRIND into CPPFLAGS
0eb1cb0b531e Makefile: pass $(CFLAGS) also during dependency generation
Signed-off-by: Rob Herring <robh@kernel.org>
The Makefile.dtc and Makefile.libfdt fragments from upstream dtc aren't
used by the kernel build, so let's remove them and stop syncing them.
Signed-off-by: Rob Herring <robh@kernel.org>
The 'imply' statement may create unmet direct dependency when the
implied symbol depends on m.
[Test Code]
config FOO
tristate "foo"
imply BAZ
config BAZ
tristate "baz"
depends on BAR
config BAR
def_tristate m
config MODULES
def_bool y
option modules
If you set FOO=y, BAZ is also promoted to y, which results in the
following .config file:
CONFIG_FOO=y
CONFIG_BAZ=y
CONFIG_BAR=m
CONFIG_MODULES=y
This does not meet the dependency 'BAZ depends on BAR'.
Unlike 'select', what is worse, Kconfig never shows the
'WARNING: unmet direct dependencies detected for ...' for this case.
Because 'imply' is considered to be weaker than 'depends on', Kconfig
should take the direct dependency into account.
For clarification, describe this case in kconfig-language.rst too.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
The 'imply' keyword restricts a symbol to y or n, excluding m
when it is implied by y. This is the original behavior since
commit 237e3ad0f1 ("Kconfig: Introduce the "imply" keyword").
However, the author of this feature, Nicolas Pitre, stated that
the 'imply' keyword should not impose any restrictions.
(https://lkml.org/lkml/2020/2/19/714)
I agree, and want to get rid of this tricky behavior.
Suggested-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Currently when CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n, modpost
only warns when a module is missing namespace imports. Under this
configuration, such a module cannot be loaded into the kernel anyway, as
the module loader would reject it. We might as well return a build
error when a module is missing namespace imports under
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n, so that the build
warning does not go ignored/unnoticed.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Rework modpost's logging interface by consolidating merror(), warn(), and
fatal() to use a single function, modpost_log(). Introduce different
logging levels (WARN, ERROR, FATAL) as well. The purpose of this cleanup is
to reduce code duplication when deciding whether or not to warn or error
out based on a condition.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The dt_binding_check target is located outside of the
'ifneq ($(dtstree),) ... endif' block.
So, you can run 'make dt_binding_check' on any architecture.
This makes a perfect sense because the dt-schema is arch-agnostic.
The only one problem I see is that scripts/dtc/dtc is not always built.
For example, ARCH=x86 defconfig does not define CONFIG_DTC. Kbuild
descends into scripts/dtc/ with doing nothing. Then, it fails to build
*.example.dt.yaml files.
Let's build scripts/dtc/dtc forcibly when running dt_binding_check.
The dt-schema does not depend on any CONFIG option either, so you
should be able to run dt_binding_check without the .config file.
Going forward, you can directly run 'make dt_binding_check' in a
pristine source tree.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
New bpf helper bpf_get_ns_current_pid_tgid,
This helper will return pid and tgid from current task
which namespace matches dev_t and inode number provided,
this will allows us to instrument a process inside a container.
Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200304204157.58695-3-cneirabustos@gmail.com
When a compiler supports multiple architectures, some compiler features
can be dependent on the target architecture.
This is typical for Clang, which supports multiple LLVM backends.
Even for GCC, we need to take care of biarch compiler cases.
It is not a problem when we evaluate cc-option in Makefiles because
cc-option is tested against the flag in question + $(KBUILD_CFLAGS).
The cc-option in Kconfig, on the other hand, does not accumulate
tested flags. Due to this simplification, it could potentially test
cc-option against a different target.
At first, Kconfig always evaluated cc-option against the host
architecture.
Since commit e8de12fb7c ("kbuild: Check for unknown options with
cc-option usage in Kconfig and clang"), in case of cross-compiling
with Clang, the target triple is correctly passed to Kconfig.
The case with biarch GCC (and native build with Clang) is still not
handled properly. We need to pass some flags to specify the target
machine bit.
Due to the design, all the macros in Kconfig are expanded in the
parse stage, where we do not know the target bit size yet.
For example, arch/x86/Kconfig allows a user to toggle CONFIG_64BIT.
If a compiler flag -foo depends on the machine bit, it must be tested
twice, one with -m32 and the other with -m64.
However, -m32/-m64 are not always recognized. So, this commits adds
m64-flag and m32-flag macros. They expand to -m32, -m64, respectively
if supported. Or, they expand to an empty string if unsupported.
The typical usage is like this:
config FOO
bool
default $(cc-option,$(m64-flag) -foo) if 64BIT
default $(cc-option,$(m32-flag) -foo)
This is clumsy, but there is no elegant way to handle this in the
current static macro expansion.
There was discussion for static functions vs dynamic functions.
The consensus was to go as far as possible with the static functions.
(https://lkml.org/lkml/2018/3/2/22)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: George Spelvin <lkml@sdf.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Information about GCC plugins is relevant to kernel building, so move this
document to the kbuild manual.
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This makes the script more convenient to run.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When CONFIG_DEBUG_INFO is enabled, the two kallsyms linking steps spend
time collecting and writing the dwarf sections to the temporary output
files. kallsyms does not need this information, and leaving it off
halves their linking time. This is especially noticeable without
CONFIG_DEBUG_INFO_REDUCED. The BTF linking stage, however, does still
need those details.
Refactor the BTF and kallsyms generation stages slightly for more
regularized temporary names. Skip debug during kallsyms links.
Additionally move "info BTF" to the correct place since commit
8959e39272 ("kbuild: Parameterize kallsyms generation and correct
reporting"), which added "info LD ..." to vmlinux_link calls.
For a full debug info build with BTF, my link time goes from 1m06s to
0m54s, saving about 12 seconds, or 18%.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/202003031814.4AEA3351@keescook
Most folks only run dt_binding_check on the single schema they care about
by setting DT_SCHEMA_FILES. That means example is only checked against
that one schema which is not always sufficient.
Let's address this by splitting processed-schema.yaml into 2 files: one
that's always all schemas for the examples and one that's just the schema
in DT_SCHEMA_FILES for dtbs.
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When doing a cold build, autoksyms.h starts empty, and is updated late
in the build process to have visibility over the symbols used by in-tree
drivers. But since the symbol whitelist is known upfront, it can be used
to pre-populate autoksyms.h and maximize the amount of code that can be
compiled to its final state in a single pass, hence reducing build time.
Do this by using gen_autoksyms.sh to initialize autoksyms.h instead of
creating an empty file.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Tested-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In order to prepare the ground for a build-time optimization, split
adjust_autoksyms.sh into two scripts: one that generates autoksyms.h
based on all currently available information (whitelist, and .mod
files), and the other to inspect the diff between two versions of
autoksyms.h and trigger appropriate rebuilds.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Tested-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
CONFIG_TRIM_UNUSED_KSYMS currently removes all unused exported symbols
from ksymtab. This works really well when using in-tree drivers, but
cannot be used in its current form if some of them are out-of-tree.
Indeed, even if the list of symbols required by out-of-tree drivers is
known at compile time, the only solution today to guarantee these don't
get trimmed is to set CONFIG_TRIM_UNUSED_KSYMS=n. This not only wastes
space, but also makes it difficult to control the ABI usable by vendor
modules in distribution kernels such as Android. Being able to control
the kernel ABI surface is particularly useful to ship a unique Generic
Kernel Image (GKI) for all vendors, which is a first step in the
direction of getting all vendors to contribute their code upstream.
As such, attempt to improve the situation by enabling users to specify a
symbol 'whitelist' at compile time. Any symbol specified in this
whitelist will be kept exported when CONFIG_TRIM_UNUSED_KSYMS is set,
even if it has no in-tree user. The whitelist is defined as a simple
text file, listing symbols, one per line.
Acked-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Tested-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Most of the Kconfig commands (except defconfig and all*config) read
the .config file as a base set of CONFIG options.
When it does not exist, the files in DEFCONFIG_LIST are searched in
this order and loaded if found.
I do not see much sense in the last two lines in DEFCONFIG_LIST.
[1] ARCH_DEFCONFIG
The entry for DEFCONFIG_LIST is guarded by 'depends on !UML'. So, the
ARCH_DEFCONFIG definition in arch/x86/um/Kconfig is meaningless.
arch/{sh,sparc,x86}/Kconfig define ARCH_DEFCONFIG depending on 32 or
64 bit variant symbols. This is a little bit strange; ARCH_DEFCONFIG
should be a fixed string because the base config file is loaded before
the symbol evaluation stage.
Using KBUILD_DEFCONFIG makes more sense because it is fixed before
Kconfig is invoked. Fortunately, arch/{sh,sparc,x86}/Makefile define it
in the same way, and it works as expected. Hence, replace ARCH_DEFCONFIG
with "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)".
[2] arch/$(ARCH)/defconfig
This file path is no longer valid. The defconfig files are always located
in the arch configs/ directories.
$ find arch -name defconfig | sort
arch/alpha/configs/defconfig
arch/arm64/configs/defconfig
arch/csky/configs/defconfig
arch/nds32/configs/defconfig
arch/riscv/configs/defconfig
arch/s390/configs/defconfig
arch/unicore32/configs/defconfig
The path arch/*/configs/defconfig is already covered by
"arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)". So, this file path is
not necessary.
I moved the default KBUILD_DEFCONFIG to the top Makefile. Otherwise,
the 7 architectures listed above would end up with endless loop of
syncconfig.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
With Ubuntu 16.04 (and presumably Debian distros of the same age),
the instructions for setting up a python virtual environment should
do so with the python 3 interpreter. On these older distros, the
default python (and virtualenv command) might be python2 based.
Some of the packages that sphinx relies on are now only available
for python3. If you don't specify the python3 interpreter for
the virtualenv, you get errors when doing the pip installs for
various packages
Fix this by adding '-p python3' to the virtualenv recommendation
line.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Link: https://lore.kernel.org/r/1582594481-23221-1-git-send-email-tim.bird@sony.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
If *q is '\0', the condition (isalnum(*q) || *q == '_') is false anyway.
It is redundant to ensure non-zero *q.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This is probably stale code. In old days (~ Linux 2.5.59), Kbuild made
genksyms generate include/linux/modules/*.ver files.
The currenct Kbuild does not generate *.ver files at all.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts a very old commit, which dates back to the pre-git era:
|commit 5d1cfb5b12f72145d30ba0f53c9f238144b122b8
|Author: Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de>
|Date: Sat Jul 27 02:53:19 2002 -0500
|
| kbuild: Fix compiling/installing as different users
|
| "make bzImage && sudo make install" had the problem that during
| the "sudo make install" the build system would notice that the information
| in include/linux/compile.h is not accurate (it says "compiled by <user>",
| but we are root), thus causing compile.h to be updated and leading to
| some recompiles.
|
| We now only update "compile.h" if the current user is the owner of
| include/linux/autoconf.h, i.e. the user who did the "make *config". So the
| above sequence will correctly state "compiled by <user>".
|
|diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h
|index 6313db96172..cd956380978 100755
|--- a/scripts/mkcompile_h
|+++ b/scripts/mkcompile_h
|@@ -3,6 +3,17 @@ ARCH=$2
| SMP=$3
| CC=$4
|
|+# If compile.h exists already and we don't own autoconf.h
|+# (i.e. we're not the same user who did make *config), don't
|+# modify compile.h
|+# So "sudo make install" won't change the "compiled by <user>"
|+# do "compiled by root"
|+
|+if [ -r $TARGET -a ! -O ../include/linux/autoconf.h ]; then
|+ echo ' (not modified)'
|+ exit 0
|+fi
|+
| if [ -r ../.version ]; then
| VERSION=`cat ../.version`
| else
The 'make bzImage && sudo make install' problem no longer happens
because commit 1648e4f805 ("x86, kbuild: make "make install" not
depend on vmlinux") fixed the root cause.
Commit 19514fc665 ("arm, kbuild: make "make install" not depend on
vmlinux") fixed the similar issue on ARM, with detailed explanation.
So, the rule is that the installation targets should never trigger
the builds of any build artifact. By following it, this check is
unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-02-28
The following pull-request contains BPF updates for your *net-next* tree.
We've added 41 non-merge commits during the last 7 day(s) which contain
a total of 49 files changed, 1383 insertions(+), 499 deletions(-).
The main changes are:
1) BPF and Real-Time nicely co-exist.
2) bpftool feature improvements.
3) retrieve bpf_sk_storage via INET_DIAG.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove initial SIDs that have never been used or are no longer used by
the kernel from its string table, which is also used to generate the
SECINITSID_* symbols referenced in code. Update the code to
gracefully handle the fact that these can now be NULL. Stop treating
it as an error if a policy defines additional initial SIDs unknown to
the kernel. Do not load unused initial SID contexts into the sidtab.
Fix the incorrect usage of the name from the ocontext in error
messages when loading initial SIDs since these are not presently
written to the kernel policy and are therefore always NULL.
After this change, it is possible to safely reclaim and reuse some of
the unused initial SIDs without compatibility issues. Specifically,
unused initial SIDs that were being assigned the same context as the
unlabeled initial SID in policies can be reclaimed and reused for
another purpose, with existing policies still treating them as having
the unlabeled context and future policies having the option of mapping
them to a more specific context. For example, this could have been
used when the infiniband labeling support was introduced to define
initial SIDs for the default pkey and endport SIDs similar to the
handling of port/netif/node SIDs rather than always using
SECINITSID_UNLABELED as the default.
The set of safely reclaimable unused initial SIDs across all known
policies is igmp_packet (13), icmp_socket (14), tcp_socket (15), kmod
(24), policy (25), and scmp_packet (26); these initial SIDs were
assigned the same context as unlabeled in all known policies including
mls. If only considering non-mls policies (i.e. assuming that mls
users always upgrade policy with their kernels), the set of safely
reclaimable unused initial SIDs further includes file_labels (6), init
(7), sysctl_modprobe (16), and sysctl_fs (18) through sysctl_dev (23).
Adding new initial SIDs beyond SECINITSID_NUM to policy unfortunately
became a fatal error in commit 24ed7fdae6 ("selinux: use separate
table for initial SID lookup") and even before that it could cause
problems on a policy reload (collision between the new initial SID and
one allocated at runtime) ever since commit 42596eafdd ("selinux:
load the initial SIDs upon every policy load") so we cannot safely
start adding new initial SIDs to policies beyond SECINITSID_NUM (27)
until such a time as all such kernels do not need to be supported and
only those that include this commit are relevant. That is not a big
deal since we haven't added a new initial SID since 2004 (v2.6.7) and
we have plenty of unused ones we can reclaim if we truly need one.
If we want to avoid the wasted storage in initial_sid_to_string[]
and/or sidtab->isids[] for the unused initial SIDs, we could introduce
an indirection between the kernel initial SID values and the policy
initial SID values and just map the policy SID values in the ocontexts
to the kernel values during policy_load_isids(). Originally I thought
we'd do this by preserving the initial SID names in the kernel policy
and creating a mapping at load time like we do for the security
classes and permissions but that would require a new kernel policy
format version and associated changes to libsepol/checkpolicy and I'm
not sure it is justified. Simpler approach is just to create a fixed
mapping table in the kernel from the existing fixed policy values to
the kernel values. Less flexible but probably sufficient.
A separate selinux userspace change was applied in
8677ce5e8f
to enable removal of most of the unused initial SID contexts from
policies, but there is no dependency between that change and this one.
That change permits removing all of the unused initial SID contexts
from policy except for the fs and sysctl SID contexts. The initial
SID declarations themselves would remain in policy to preserve the
values of subsequent ones but the contexts can be dropped. If/when
the kernel decides to reuse one of them, future policies can change
the name and start assigning a context again without breaking
compatibility.
Here is how I would envision staging changes to the initial SIDs in a
compatible manner after this commit is applied:
1. At any time after this commit is applied, the kernel could choose
to reclaim one of the safely reclaimable unused initial SIDs listed
above for a new purpose (i.e. replace its NULL entry in the
initial_sid_to_string[] table with a new name and start using the
newly generated SECINITSID_name symbol in code), and refpolicy could
at that time rename its declaration of that initial SID to reflect its
new purpose and start assigning it a context going
forward. Existing/old policies would map the reclaimed initial SID to
the unlabeled context, so that would be the initial default behavior
until policies are updated. This doesn't depend on the selinux
userspace change; it will work with existing policies and userspace.
2. In 6 months or so we'll have another SELinux userspace release that
will include the libsepol/checkpolicy support for omitting unused
initial SID contexts.
3. At any time after that release, refpolicy can make that release its
minimum build requirement and drop the sid context statements (but not
the sid declarations) for all of the unused initial SIDs except for
fs and sysctl, which must remain for compatibility on policy
reload with old kernels and for compatibility with kernels that were
still using SECINITSID_SYSCTL (< 2.6.39). This doesn't depend on this
kernel commit; it will work with previous kernels as well.
4. After N years for some value of N, refpolicy decides that it no
longer cares about policy reload compatibility for kernels that
predate this kernel commit, and refpolicy drops the fs and sysctl
SID contexts from policy too (but retains the declarations).
5. After M years for some value of M, the kernel decides that it no
longer cares about compatibility with refpolicies that predate step 4
(dropping the fs and sysctl SIDs), and those two SIDs also become
safely reclaimable. This step is optional and need not ever occur unless
we decide that the need to reclaim those two SIDs outweighs the
compatibility cost.
6. After O years for some value of O, refpolicy decides that it no
longer cares about policy load (not just reload) compatibility for
kernels that predate this kernel commit, and both kernel and refpolicy
can then start adding and using new initial SIDs beyond 27. This does
not depend on the previous change (step 5) and can occur independent
of it.
Fixes: https://github.com/SELinuxProject/selinux-kernel/issues/12
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This if_change_rule is not working properly; it cannot detect any
command line change.
The reason is because cmd-check in scripts/Kbuild.include compares
$(cmd_$@) and $(cmd_$1), but cmd_dtc_dt_yaml does not exist here.
For if_change_rule to work properly, the stem part of cmd_* and rule_*
must match. Because this cmd_and_fixdep invokes cmd_dtc, this rule must
be named rule_dtc.
Fixes: 4f0e3a57d6 ("kbuild: Add support for DT binding schema checks")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Change "/usr/bin/python3" to "/usr/bin/env python3" for
more portable solution in bpf_helpers_doc.py.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200225205426.6975-1-scott.branden@broadcom.com
This script allows sysctl documentation to be checked against the
kernel source code, to identify missing or obsolete entries. Running
it against 5.5 shows for example that sysctl/kernel.rst has two
obsolete entries and is missing 52 entries.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
There are some issues at the script with regards to :doc:
tags:
- It doesn't escape files under Documentation/sphinx,
leading to false positives;
- It doesn't handle root URLs, like :doc:`/x86/boot`;
- It doesn't output the file with a bad reference.
Address those things, in order to remove false positives
from the list of problems.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Recently, I found that get_maintainer was causing me to send emails to
the old addresses for maintainers. Since I usually just trust the
output of get_maintainer to know the right email address, I didn't even
look carefully and fired off two patch series that went to the wrong
place. Oops.
The problem was introduced recently when trying to add signatures from
Fixes. The problem was that these email addresses were added too early
in the process of compiling our list of places to send. Things added to
the list earlier are considered more canonical and when we later added
maintainer entries we ended up deduplicating to the old address.
Here are two examples using mainline commits (to make it easier to
replicate) for the two maintainers that I messed up recently:
$ git format-patch d8549bcd0529~..d8549bcd0529
$ ./scripts/get_maintainer.pl 0001-clk-Add-clk_hw*.patch | grep Boyd
Stephen Boyd <sboyd@codeaurora.org>...
$ git format-patch 6d1238aa3395~..6d1238aa3395
$ ./scripts/get_maintainer.pl 0001-arm64-dts-qcom-qcs404*.patch | grep Andy
Andy Gross <andy.gross@linaro.org>
Let's move the adding of addresses from Fixes: to the end since the
email addresses from these are much more likely to be older.
After this patch the above examples get the right addresses for the two
examples.
Link: http://lkml.kernel.org/r/20200127095001.1.I41fba9f33590bfd92cd01960161d8384268c6569@changeid
Fixes: 2f5bd34369 ("scripts/get_maintainer.pl: add signatures from Fixes: <badcommit> lines in commit message")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Joe Perches <joe@perches.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 1ca84ed642 ("MAINTAINERS: Reclaim the P: tag for Maintainer
Entry Profile") changed the use of the "P:" tag from "Person" to
"Profile (ie: special subsystem coding styles and characteristics)"
Change how get_maintainer.pl parses the "P:" tag to match.
Link: http://lkml.kernel.org/r/ca53823fc5d25c0be32ad937d0207a0589c08643.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Dan Williams <dan.j.william@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Query ld cache for versions of both libc and libcpp run-time, instead
of querying /proc/self/maps for libc run-time, and ld cache for libcpp
run-time, thus reducing code size and complexity.
Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Link: https://lore.kernel.org/r/20200209140057.20181-1-alexander.kapshuk@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 56d5893615 ("kbuild: do not create orphan built-in.a or
obj-y objects"), scripts/link-vmlinux.sh does nothing when descending
into init/.
Once the version number becomes out of sync between .version and
include/generated/compile.h, it is not self-healing.
[How to reproduce]
$ echo 100 > .version
$ make
You will see the number in the .version is always bigger than that in
compile.h by one. After this, every time you run 'make', the vmlinux is
re-linked even when none of source files is updated.
Fixes: 56d5893615 ("kbuild: do not create orphan built-in.a or obj-y objects")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
memcpy() writes one more byte than allocated.
Fixes: 8d60526999 ("scripts/kallsyms: change table to store (strcut sym_entry *)")
Reported-by: youling257 <youling257@gmail.com>
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
- fix randconfig to generate a sane .config
- rename hostprogs-y / always to hostprogs / always-y, which are
more natual syntax.
- optimize scripts/kallsyms
- fix yes2modconfig and mod2yesconfig
- make multiple directory targets ('make foo/ bar/') work
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl47NfMVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGRGwP/3AHO8P0wGEeFKs3ziSMjs2W7/Pj
lN08Kuxm0u3LnyEEcHVUveoi+xBYqvrw0RsGgYf5S8q0Mpep7MPqbfkDUxV/0Zkj
QP2CsvOTbjdBjH7q3ojkwLcDl0Pxu9mg3eZMRXZ2WQeNXuMRw6Bicoh7ElvB1Bv/
HC+j30i2Me3cf/riQGSAsstvlXyIR8RaerR8PfRGESTysiiN76+JcHTatJHhOJL9
O6XKkzo8/CXMYKKVF4Ae4NP+WFg6E96/pAPx0Rf47RbPX9UG35L9rkzTDnk70Ms6
OhKiu3hXsRX7mkqApuoTqjge4+iiQcKZxYmMXU1vGlIRzjwg19/4YFP6pDSCcnIu
kKb8KN4o4N41N7MFS3OLZWwISA8Vw6RbtwDZ3AghDWb7EHb9oNW42mGfcAPr1+wZ
/KH6RHTzaz+5q2MgyMY1NhADFrhIT9CvDM+UJECgbokblnw7PHAnPmbsuVak9ZOH
u9ojO1HpTTuIYO6N6v4K5zQBZF1N+RvkmBnhHd8j6SksppsCoC/G62QxgXhF2YK3
FQMpATCpuyengLxWAmPEjsyyPOlrrdu9UxqNsXVy5ol40+7zpxuHwKcQKCa9urJR
rcpbIwLaBcLhHU4BmvBxUk5aZxxGV2F0O0gXTOAbT2xhd6BipZSMhUmN49SErhQm
NC/coUmQX7McxMXh
=sv4U
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix randconfig to generate a sane .config
- rename hostprogs-y / always to hostprogs / always-y, which are more
natual syntax.
- optimize scripts/kallsyms
- fix yes2modconfig and mod2yesconfig
- make multiple directory targets ('make foo/ bar/') work
* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: make multiple directory targets work
kconfig: Invalidate all symbols after changing to y or m.
kallsyms: fix type of kallsyms_token_table[]
scripts/kallsyms: change table to store (strcut sym_entry *)
scripts/kallsyms: rename local variables in read_symbol()
kbuild: rename hostprogs-y/always to hostprogs/always-y
kbuild: fix the document to use extra-y for vmlinux.lds
kconfig: fix broken dependency in randconfig-generated .config
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl49mtYPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y/5sH+wX3mdrcC7pX2XALDvl35P+QB5CFy0v1bkMY
KAi/Ulxd6aicnowsBx6wdqSZO01Bh0E/nc9x42WIbHBR9/J5ZlitpKj5pGi0JYE/
vguMEFgAPQb1dx3EGJ56dxKqJ/+zICVLhf7pawP82QqE6z4Kuonp9AXR1UMRvWej
/b1qobQB++skh+nfGYqt7c7D6MQjaSb+5+TkU6xbHfoeMHDJkNdBHiiM5IbVE/s2
KgAngM7cTYeu4el4h6ue1ZJjbU2iOi1FJU95r2ufMYEt6EEfP2zkzCYXju/xyIbO
2NsdY3xUHhr9H32xkopPMoYrnzuzoTv8xi1xkhsnbOPZzZQMPls=
=zx2k
-----END PGP SIGNATURE-----
Merge tag 'docs-5.6-2' of git://git.lwn.net/linux
Pull Documentation fixes from Jonathan Corbet:
"A handful of small documentation fixes that wandered in"
* tag 'docs-5.6-2' of git://git.lwn.net/linux:
Allow git builds of Sphinx
Documentation: changes.rst: update several outdated project URLs
Documentation: build warnings related to missing blank lines after explicit markups has been fixed
mailmap: add entry for Tiezhu Yang
Documentation/ko_KR/howto: Update a broken link
Documentation/ko_KR/howto: Update broken web addresses
docs/locking: Fix outdated section names
When using a non-release version of Sphinx, from a local build (with
improvements for kernel doc handling, why not),
sphinx-build --version
reports versions of the form
sphinx-build 3.0.0+/4703d9119972
i.e. base version, a plus symbol, slash, and the start of the git hash
of whatever repository the command is run in (no, not the hash that
was used to build Sphinx!).
This patch fixes the installation check in sphinx-pre-install to
recognise such version output.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200124183316.1719218-1-steve@sk2.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Since commit 89b9060987 ("kconfig: Add yes2modconfig and
mod2yesconfig targets.") forgot to clear SYMBOL_VALID bit after
changing to y or m, these targets did not save the changes.
Call sym_clear_all_valid() so that all symbols are revalidated.
Fixes: 89b9060987 ("kconfig: Add yes2modconfig and mod2yesconfig targets.")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since 5.5-rc1 the last user of this function is gone, so remove the
functionality.
See commit
2ad9d7747c ("netfilter: conntrack: free extension area immediately")
for details.
Link: http://lkml.kernel.org/r/20191212223442.22141-1-fw@strlen.de
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The symbol table is extended every 10000 addition by using realloc(),
where data copy might occur to the new buffer.
To decrease the amount of possible data copy, let's change the table
to store the pointer.
The symbol type + symbol name part is appended at the end of
(struct sym_entry), and allocated together with the struct body.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
I will use 'sym' for the point to struce sym_entry in the next commit.
Rename 'sym', 'stype' to 'name', 'type', which are more intuitive.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.
It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.
This commit renames like follows:
always -> always-y
hostprogs-y -> hostprogs
So, scripts/Makefile will look like this:
always-$(CONFIG_BUILD_BIN2C) += ...
always-$(CONFIG_KALLSYMS) += ...
...
hostprogs := $(always-y) $(always-m)
I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.
The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Running randconfig on arm64 using KCONFIG_SEED=0x40C5E904 (e.g. on v5.5)
produces the .config with CONFIG_EFI=y and CONFIG_CPU_BIG_ENDIAN=y,
which does not meet the !CONFIG_CPU_BIG_ENDIAN dependency.
This is because the user choice for CONFIG_CPU_LITTLE_ENDIAN vs
CONFIG_CPU_BIG_ENDIAN is set by randomize_choice_values() after the
value of CONFIG_EFI is calculated.
When this happens, the has_changed flag should be set.
Currently, it takes the result from the last iteration. It should
accumulate all the results of the loop.
Fixes: 3b9a19e089 ("kconfig: loop as long as we changed some symbols in randconfig")
Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- add 'yes2modconfig' and 'mod2yesconfig' targets
- sanitize help text
- various code cleanups
-----BEGIN PGP SIGNATURE-----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=FgLk
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- add 'yes2modconfig' and 'mod2yesconfig' targets (useful mainly for
turning syzbot configs into more modular ones as a step to minimizing
the result)
- sanitize help text
- various code cleanups
* tag 'kconfig-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix documentation typos
kconfig: fix an "implicit declaration of function" warning
kconfig: fix nesting of symbol help text
kconfig: distinguish between dependencies and visibility in help text
kconfig: list all definitions of a symbol in help text
kconfig: Add yes2modconfig and mod2yesconfig targets.
kconfig: use $(PERL) in Makefile
kconfig: fix too deep indentation in Makefile
kconfig: localmodconfig: fix indentation for closing brace
kconfig: localmodconfig: remove unused $config
kconfig: squash prop_alloc() into menu_add_prop()
kconfig: remove sym from struct property
kconfig: remove 'prompt' argument from menu_add_prop()
kconfig: move prompt handling to menu_add_prompt() from menu_add_prop()
kconfig: remove 'prompt' symbol
kconfig: drop T_WORD from the RHS of 'prompt' symbol
kconfig: use parent->dep as the parentdep of 'menu'
kconfig: remove the rootmenu check in menu_add_prop()
- detect missing include guard in UAPI headers
- do not create orphan built-in.a or obj-y objects
- generate modules.builtin more simply, and drop tristate.conf
- simplify built-in initramfs creation
- make linux-headers deb package thinner
- optimize the deb package build script
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=i/xZ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- detect missing include guard in UAPI headers
- do not create orphan built-in.a or obj-y objects
- generate modules.builtin more simply, and drop tristate.conf
- simplify built-in initramfs creation
- make linux-headers deb package thinner
- optimize the deb package build script
- misc cleanups
* tag 'kbuild-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
builddeb: split libc headers deployment out into a function
builddeb: split kernel headers deployment out into a function
builddeb: remove redundant make for ARCH=um
builddeb: avoid invoking sub-shells where possible
builddeb: remove redundant $objtree/
builddeb: match temporary directory name to the package name
builddeb: remove unneeded files in hdrobjfiles for headers package
kbuild: use -S instead of -E for precise cc-option test in Kconfig
builddeb: allow selection of .deb compressor
kbuild: remove 'Building modules, stage 2.' log
kbuild: remove *.tmp file when filechk fails
kbuild: remove PYTHON2 variable
modpost: assume STT_SPARC_REGISTER is defined
gen_initramfs.sh: remove intermediate cpio_list on errors
initramfs: refactor the initramfs build rules
gen_initramfs.sh: always output cpio even without -o option
initramfs: add default_cpio_list, and delete -d option support
initramfs: generate dependency list and cpio at the same time
initramfs: specify $(src)/gen_initramfs.sh as a prerequisite in Makefile
initramfs: make initramfs compression choice non-optional
...
Pull updates from Andrew Morton:
"Most of -mm and quite a number of other subsystems: hotfixes, scripts,
ocfs2, misc, lib, binfmt, init, reiserfs, exec, dma-mapping, kcov.
MM is fairly quiet this time. Holidays, I assume"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
kcov: ignore fault-inject and stacktrace
include/linux/io-mapping.h-mapping: use PHYS_PFN() macro in io_mapping_map_atomic_wc()
execve: warn if process starts with executable stack
reiserfs: prevent NULL pointer dereference in reiserfs_insert_item()
init/main.c: fix misleading "This architecture does not have kernel memory protection" message
init/main.c: fix quoted value handling in unknown_bootoption
init/main.c: remove unnecessary repair_env_string in do_initcall_level
init/main.c: log arguments and environment passed to init
fs/binfmt_elf.c: coredump: allow process with empty address space to coredump
fs/binfmt_elf.c: coredump: delete duplicated overflow check
fs/binfmt_elf.c: coredump: allocate core ELF header on stack
fs/binfmt_elf.c: make BAD_ADDR() unlikely
fs/binfmt_elf.c: better codegen around current->mm
fs/binfmt_elf.c: don't copy ELF header around
fs/binfmt_elf.c: fix ->start_code calculation
fs/binfmt_elf.c: smaller code generation around auxv vector fill
lib/find_bit.c: uninline helper _find_next_bit()
lib/find_bit.c: join _find_next_bit{_le}
uapi: rename ext2_swab() to swab() and share globally in swab.h
lib/scatterlist.c: adjust indentation in __sg_alloc_table
...
Here are some of the common spelling mistakes and typos that I've found
while fixing up spelling mistakes in the kernel. Most of them still
exist in more than two source files.
Link: http://lkml.kernel.org/r/20191229143626.51238-1-xndchn@gmail.com
Signed-off-by: Xiong <xndchn@gmail.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Chris Paterson <chris.paterson2@renesas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
couple of things of note:
- Conversion of the NFS documentation to RST
- A new document on how to help with documentation (and a maintainer
profile entry too)
Plus the usual collection of typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl4wnWwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YFPIH/069z5bJMrT3QRzENu8A9Elz76IXoy7pJOmJ
53Ml5+c4sYpvV3o6d9n5TSvdy1pH0Shw73FbJzUIMj0ZCcHysWVO1eBDlcj8soJQ
UonCXbKc+30AJBoKZqAC3jjFw0/fXwD1x+GzQo+l0LMQDOc0i0Luv8/riR5c9hEO
5TOXB2GyhHnbSFxzcN9afmBsuNz1cPa/fg5q6zL+5Q/fUUOJ6IcYwq165P2EwZdm
KRah299VU/XhrYlHJX7OZX3ck9+PaYURSpv4KH81J4jhmoBWAw5jPt77Qw8aN3w9
LcNip+qgpx9wC7OgBiqdJkKcvsNy76pfDhUOj+XarGisA8031d0=
=9m/7
-----END PGP SIGNATURE-----
Merge tag 'docs-5.6' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a relatively quiet cycle for documentation, but there's
still a couple of things of note:
- Conversion of the NFS documentation to RST
- A new document on how to help with documentation (and a maintainer
profile entry too)
Plus the usual collection of typo fixes, etc"
* tag 'docs-5.6' of git://git.lwn.net/linux: (40 commits)
docs: filesystems: add overlayfs to index.rst
docs: usb: remove some broken references
scripts/find-unused-docs: Fix massive false positives
docs: nvdimm: use ReST notation for subsection
zram: correct documentation about sysfs node of huge page writeback
Documentation: zram: various fixes in zram.rst
Add a maintainer entry profile for documentation
Add a document on how to contribute to the documentation
docs: Keep up with the location of NoUri
Documentation: Call out example SYM_FUNC_* usage as x86-specific
Documentation: nfs: fault_injection: convert to ReST
Documentation: nfs: pnfs-scsi-server: convert to ReST
Documentation: nfs: convert pnfs-block-server to ReST
Documentation: nfs: idmapper: convert to ReST
Documentation: convert nfsd-admin-interfaces to ReST
Documentation: nfs-rdma: convert to ReST
Documentation: nfsroot.rst: COSMETIC: refill a paragraph
Documentation: nfsroot.txt: convert to ReST
Documentation: convert nfs.txt to ReST
Documentation: filesystems: convert vfat.txt to RST
...
Here are the big set of tty and serial driver updates for 5.6-rc1
Included in here are:
- dummy_con cleanups (touches lots of arch code)
- sysrq logic cleanups (touches lots of serial drivers)
- samsung driver fixes (wasn't really being built)
- conmakeshash move to tty subdir out of scripts
- lots of small tty/serial driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXjFRBg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn2VACgkge7vTeUNeZFc+6F4NWphAQ5tCQAoK/MMbU6
0O8ef7PjFwCU4s227UTv
=6m40
-----END PGP SIGNATURE-----
Merge tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here are the big set of tty and serial driver updates for 5.6-rc1
Included in here are:
- dummy_con cleanups (touches lots of arch code)
- sysrq logic cleanups (touches lots of serial drivers)
- samsung driver fixes (wasn't really being built)
- conmakeshash move to tty subdir out of scripts
- lots of small tty/serial driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits)
tty: n_hdlc: Use flexible-array member and struct_size() helper
tty: baudrate: SPARC supports few more baud rates
tty: baudrate: Synchronise baud_table[] and baud_bits[]
tty: serial: meson_uart: Add support for kernel debugger
serial: imx: fix a race condition in receive path
serial: 8250_bcm2835aux: Document struct bcm2835aux_data
serial: 8250_bcm2835aux: Use generic remapping code
serial: 8250_bcm2835aux: Allocate uart_8250_port on stack
serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER
serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER
serial: 8250_bcm2835aux: Fix line mismatch on driver unbind
serial_core: Remove unused member in uart_port
vt: Correct comment documenting do_take_over_console()
vt: Delete comment referencing non-existent unbind_con_driver()
arch/xtensa/setup: Drop dummy_con initialization
arch/x86/setup: Drop dummy_con initialization
arch/unicore32/setup: Drop dummy_con initialization
arch/sparc/setup: Drop dummy_con initialization
arch/sh/setup: Drop dummy_con initialization
arch/s390/setup: Drop dummy_con initialization
...
Pull networking updates from David Miller:
1) Add WireGuard
2) Add HE and TWT support to ath11k driver, from John Crispin.
3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.
4) Add variable window congestion control to TIPC, from Jon Maloy.
5) Add BCM84881 PHY driver, from Russell King.
6) Start adding netlink support for ethtool operations, from Michal
Kubecek.
7) Add XDP drop and TX action support to ena driver, from Sameeh
Jubran.
8) Add new ipv4 route notifications so that mlxsw driver does not have
to handle identical routes itself. From Ido Schimmel.
9) Add BPF dynamic program extensions, from Alexei Starovoitov.
10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.
11) Add support for macsec HW offloading, from Antoine Tenart.
12) Add initial support for MPTCP protocol, from Christoph Paasch,
Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.
13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
Cherian, and others.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
udp: segment looped gso packets correctly
netem: change mailing list
qed: FW 8.42.2.0 debug features
qed: rt init valid initialization changed
qed: Debug feature: ilt and mdump
qed: FW 8.42.2.0 Add fw overlay feature
qed: FW 8.42.2.0 HSI changes
qed: FW 8.42.2.0 iscsi/fcoe changes
qed: Add abstraction for different hsi values per chip
qed: FW 8.42.2.0 Additional ll2 type
qed: Use dmae to write to widebus registers in fw_funcs
qed: FW 8.42.2.0 Parser offsets modified
qed: FW 8.42.2.0 Queue Manager changes
qed: FW 8.42.2.0 Expose new registers and change windows
qed: FW 8.42.2.0 Internal ram offsets modifications
MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
Documentation: net: octeontx2: Add RVU HW and drivers overview
octeontx2-pf: ethtool RSS config support
octeontx2-pf: Add basic ethtool support
...
The commands surrounded by ( ... ) is run in a sub-shell, but you do
not have to spawn a sub-shell for every single line.
Use just one ( ... ) for creating debian/hdrsrcfiles.
For tar, use -C option instead.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This script works only when it is invoked in the $objtree, that is,
it is already relying on $objtree is '.'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The temporary directory names, debian/hdrtmp (linux-headers package)
vs debian/headertmp (linux-libc-dev package), are confusing.
Matching the directory name to the package name is clearer, IMHO.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- We do not need tools/objtool/fixdep or tools/objtool/sync-check.sh
for building external modules. Including tools/objtool/objtool is
enough.
- gcc-common.h is a check-in file. I do not see any point to search
for it in objtree.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull objtool updates from Ingo Molnar:
"The main changes are to move the ORC unwind table sorting from early
init to build-time - this speeds up booting.
No change in functionality intended"
* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Fix !CONFIG_MODULES build warning
x86/unwind/orc: Remove boot-time ORC unwind tables sorting
scripts/sorttable: Implement build-time ORC unwind table sorting
scripts/sorttable: Rename 'sortextable' to 'sorttable'
scripts/sortextable: Refactor the do_func() function
scripts/sortextable: Remove dead code
scripts/sortextable: Clean up the code to meet the kernel coding style better
scripts/sortextable: Rewrite error/success handling
This reverts upstream commit 18d7b2f4ee45fec422b7d82bab0b3c762ee907e4. A
revert in upstream dtc is pending.
This commit didn't work for properties such as 'interrupt-map' that have
phandle in the middle of an entry. It would also not work for a 0 or -1
phandle value that acts as a NULL.
Signed-off-by: Rob Herring <robh@kernel.org>
scripts/find-unused-docs.sh invokes scripts/kernel-doc to find out if a
source file contains kerneldoc or not.
However, as it passes the no longer supported "-text" option to
scripts/kernel-doc, the latter prints out its help text, causing all
files to be considered containing kerneldoc.
Get rid of these false positives by removing the no longer supported
"-text" option from the scripts/kernel-doc invocation.
Cc: stable@vger.kernel.org # 4.16+
Fixes: b051426753 ("scripts: kernel-doc: get rid of unused output formats")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200127093107.26401-1-geert+renesas@glider.be
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- remove ioremap_nocache given that is is equivalent to
ioremap everywhere
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl4vKHwLHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYMPGBAAuVNUZaZfWYHpiVP2oRcUQUguFiD3NTbknsyzV2oH
J9P0GfeENSKwE9OOhZ7XIjnCZAJwQgTK/ppQY5yiQ/KAtYyyXjXEJ6jqqjiTDInr
+3+I3t/LhkgrK7tMrb7ylTGa/d7KhaciljnOXC8+b75iddvM9I1z2pbHDbppZMS9
wT4RXL/cFtRb85AfOyPLybcka3f5P2gGvQz38qyimhJYEzHDXZu9VO1Bd20f8+Xf
eLBKX0o6yWMhcaPLma8tm0M0zaXHEfLHUKLSOkiOk+eHTWBZ3b/w5nsOQZYZ7uQp
25yaClbameAn7k5dHajduLGEJv//ZjLRWcN3HJWJ5vzO111aHhswpE7JgTZJSVWI
ggCVkytD3ESXapvswmACSeCIDMmiJMzvn6JvwuSMVB7a6e5mcqTuGo/FN+DrBF/R
IP+/gY/T7zIIOaljhQVkiEIIwiD/akYo0V9fheHTBnqcKEDTHV4WjKbeF6aCwcO+
b8inHyXZSKSMG//UlDuN84/KH/o1l62oKaB1uDIYrrL8JVyjAxctWt3GOt5KgSFq
wVz1lMw4kIvWtC/Sy2H4oB+RtODLp6yJDqmvmPkeJwKDUcd/1JKf0KsZ8j3FpGei
/rEkBEss0KBKyFAgBSRO2jIpdj2epgcBcsdB/r5mlhcn8L77AS6mHbA173kY4pQ/
Kdg=
=TUCJ
-----END PGP SIGNATURE-----
Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap
Pull ioremap updates from Christoph Hellwig:
"Remove the ioremap_nocache API (plus wrappers) that are always
identical to ioremap"
* tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap:
remove ioremap_nocache and devm_ioremap_nocache
MIPS: define ioremap_nocache to ioremap
- New architecture features
* Support for Armv8.5 E0PD, which benefits KASLR in the same way as
KPTI but without the overhead. This allows KPTI to be disabled on
CPUs that are not affected by Meltdown, even is KASLR is enabled.
* Initial support for the Armv8.5 RNG instructions, which claim to
provide access to a high bandwidth, cryptographically secure hardware
random number generator. As well as exposing these to userspace, we
also use them as part of the KASLR seed and to seed the crng once
all CPUs have come online.
* Advertise a bunch of new instructions to userspace, including support
for Data Gathering Hint, Matrix Multiply and 16-bit floating point.
- Kexec
* Cleanups in preparation for relocating with the MMU enabled
* Support for loading crash dump kernels with kexec_file_load()
- Perf and PMU drivers
* Cleanups and non-critical fixes for a couple of system PMU drivers
- FPU-less (aka broken) CPU support
* Considerable fixes to support CPUs without the FP/SIMD extensions,
including their presence in heterogeneous systems. Good luck finding
a 64-bit userspace that handles this.
- Modern assembly function annotations
* Start migrating our use of ENTRY() and ENDPROC() over to the
new-fangled SYM_{CODE,FUNC}_{START,END} macros, which are intended to
aid debuggers
- Kbuild
* Cleanup detection of LSE support in the assembler by introducing
'as-instr'
* Remove compressed Image files when building clean targets
- IP checksumming
* Implement optimised IPv4 checksumming routine when hardware offload
is not in use. An IPv6 version is in the works, pending testing.
- Hardware errata
* Work around Cortex-A55 erratum #1530923
- Shadow call stack
* Work around some issues with Clang's integrated assembler not liking
our perfectly reasonable assembly code
* Avoid allocating the X18 register, so that it can be used to hold the
shadow call stack pointer in future
- ACPI
* Fix ID count checking in IORT code. This may regress broken firmware
that happened to work with the old implementation, in which case we'll
have to revert it and try something else
* Fix DAIF corruption on return from GHES handler with pseudo-NMIs
- Miscellaneous
* Whitelist some CPUs that are unaffected by Spectre-v2
* Reduce frequency of ASID rollover when KPTI is compiled in but
inactive
* Reserve a couple of arch-specific PROT flags that are already used by
Sparc and PowerPC and are planned for later use with BTI on arm64
* Preparatory cleanup of our entry assembly code in preparation for
moving more of it into C later on
* Refactoring and cleanup
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl4oY+IQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNNfRB/4p3vax0hqaOnLRvmJPRXF31B8oPlivnr2u
6HCA9LkdU5IlrgaTNOJ/sQEqJAPOPCU7v49Ol0iYw0iKL1suUE7Ikui5VB6Uybqt
YbfF5UNzfXAMs2A86TF/hzqhxw+W+lpnZX8NVTuQeAODfHEGUB1HhTLfRi9INsER
wKEAuoZyuSUibxTFvji+DAq7nVRniXX7CM7tE385pxDisCMuu/7E5wOl+3EZYXWz
DTGzTbHXuVFL+UFCANFEUlAtmr3dQvPFIqAwVl/CxjRJjJ7a+/G3cYLsHFPrQCjj
qYX4kfhAeeBtqmHL7YFNWFwFs5WaT5UcQquFO665/+uCTWSJpORY
=AIh/
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The changes are a real mixed bag this time around.
The only scary looking one from the diffstat is the uapi change to
asm-generic/mman-common.h, but this has been acked by Arnd and is
actually just adding a pair of comments in an attempt to prevent
allocation of some PROT values which tend to get used for
arch-specific purposes. We'll be using them for Branch Target
Identification (a CFI-like hardening feature), which is currently
under review on the mailing list.
New architecture features:
- Support for Armv8.5 E0PD, which benefits KASLR in the same way as
KPTI but without the overhead. This allows KPTI to be disabled on
CPUs that are not affected by Meltdown, even is KASLR is enabled.
- Initial support for the Armv8.5 RNG instructions, which claim to
provide access to a high bandwidth, cryptographically secure
hardware random number generator. As well as exposing these to
userspace, we also use them as part of the KASLR seed and to seed
the crng once all CPUs have come online.
- Advertise a bunch of new instructions to userspace, including
support for Data Gathering Hint, Matrix Multiply and 16-bit
floating point.
Kexec:
- Cleanups in preparation for relocating with the MMU enabled
- Support for loading crash dump kernels with kexec_file_load()
Perf and PMU drivers:
- Cleanups and non-critical fixes for a couple of system PMU drivers
FPU-less (aka broken) CPU support:
- Considerable fixes to support CPUs without the FP/SIMD extensions,
including their presence in heterogeneous systems. Good luck
finding a 64-bit userspace that handles this.
Modern assembly function annotations:
- Start migrating our use of ENTRY() and ENDPROC() over to the
new-fangled SYM_{CODE,FUNC}_{START,END} macros, which are intended
to aid debuggers
Kbuild:
- Cleanup detection of LSE support in the assembler by introducing
'as-instr'
- Remove compressed Image files when building clean targets
IP checksumming:
- Implement optimised IPv4 checksumming routine when hardware offload
is not in use. An IPv6 version is in the works, pending testing.
Hardware errata:
- Work around Cortex-A55 erratum #1530923
Shadow call stack:
- Work around some issues with Clang's integrated assembler not
liking our perfectly reasonable assembly code
- Avoid allocating the X18 register, so that it can be used to hold
the shadow call stack pointer in future
ACPI:
- Fix ID count checking in IORT code. This may regress broken
firmware that happened to work with the old implementation, in
which case we'll have to revert it and try something else
- Fix DAIF corruption on return from GHES handler with pseudo-NMIs
Miscellaneous:
- Whitelist some CPUs that are unaffected by Spectre-v2
- Reduce frequency of ASID rollover when KPTI is compiled in but
inactive
- Reserve a couple of arch-specific PROT flags that are already used
by Sparc and PowerPC and are planned for later use with BTI on
arm64
- Preparatory cleanup of our entry assembly code in preparation for
moving more of it into C later on
- Refactoring and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (73 commits)
arm64: acpi: fix DAIF manipulation with pNMI
arm64: kconfig: Fix alignment of E0PD help text
arm64: Use v8.5-RNG entropy for KASLR seed
arm64: Implement archrandom.h for ARMv8.5-RNG
arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean'
arm64: entry: Avoid empty alternatives entries
arm64: Kconfig: select HAVE_FUTEX_CMPXCHG
arm64: csum: Fix pathological zero-length calls
arm64: entry: cleanup sp_el0 manipulation
arm64: entry: cleanup el0 svc handler naming
arm64: entry: mark all entry code as notrace
arm64: assembler: remove smp_dmb macro
arm64: assembler: remove inherit_daif macro
ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map()
mm: Reserve asm-generic prot flags 0x10 and 0x20 for arch use
arm64: Use macros instead of hard-coded constants for MAIR_EL1
arm64: Add KRYO{3,4}XX CPU cores to spectre-v2 safe list
arm64: kernel: avoid x18 in __cpu_soft_restart
arm64: kvm: stop treating register x18 as caller save
arm64/lib: copy_page: avoid x18 register in assembler code
...
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-01-22
The following pull-request contains BPF updates for your *net-next* tree.
We've added 92 non-merge commits during the last 16 day(s) which contain
a total of 320 files changed, 7532 insertions(+), 1448 deletions(-).
The main changes are:
1) function by function verification and program extensions from Alexei.
2) massive cleanup of selftests/bpf from Toke and Andrii.
3) batched bpf map operations from Brian and Yonghong.
4) tcp congestion control in bpf from Martin.
5) bulking for non-map xdp_redirect form Toke.
6) bpf_send_signal_thread helper from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When trying to compile with CONFIG_DEBUG_INFO_BTF enabled, I got this
error:
% make -s
Failed to generate BTF for vmlinux
Try to disable CONFIG_DEBUG_INFO_BTF
make[3]: *** [vmlinux] Error 1
Compiling again without -s shows the true error (that pahole is
missing), but since this is fatal, we should show the error
unconditionally on stderr as well, not silence it using the `info`
function. With this patch:
% make -s
BTF: .tmp_vmlinux.btf: pahole (pahole) is not available
Failed to generate BTF for vmlinux
Try to disable CONFIG_DEBUG_INFO_BTF
make[3]: *** [vmlinux] Error 1
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200122000110.GA310073@chrisdown.name
Currently, -E (stop after the preprocessing stage) is used to check
whether the given compiler flag is supported.
While it is faster than -S (or -c), it can be false-positive. You need
to run the compilation proper to check the flag more precisely.
For example, -E and -S disagree about the support of
"--param asan-instrument-allocas=1".
$ gcc -Werror --param asan-instrument-allocas=1 -E -x c /dev/null -o /dev/null
$ echo $?
0
$ gcc -Werror --param asan-instrument-allocas=1 -S -x c /dev/null -o /dev/null
cc1: error: invalid --param name ‘asan-instrument-allocas’; did you mean ‘asan-instrument-writes’?
$ echo $?
1
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Select deb compression using KDEB_COMPRESS make variable. This allows to
use gzip compression for local or test builds, and that's way faster
than now-default xz compression.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Scenario 1, ARMv7
=================
If code in arch/arm/kernel/ftrace.c would operate on mcount() pointer
the following may be generated:
00000230 <prealloc_fixed_plts>:
230: b5f8 push {r3, r4, r5, r6, r7, lr}
232: b500 push {lr}
234: f7ff fffe bl 0 <__gnu_mcount_nc>
234: R_ARM_THM_CALL __gnu_mcount_nc
238: f240 0600 movw r6, #0
238: R_ARM_THM_MOVW_ABS_NC __gnu_mcount_nc
23c: f8d0 1180 ldr.w r1, [r0, #384] ; 0x180
FTRACE currently is not able to deal with it:
WARNING: CPU: 0 PID: 0 at .../kernel/trace/ftrace.c:1979 ftrace_bug+0x1ad/0x230()
...
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.116-... #1
...
[<c0314e3d>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14)
[<c03115e9>] (show_stack) from [<c051a7f1>] (dump_stack+0x81/0xa8)
[<c051a7f1>] (dump_stack) from [<c0321c5d>] (warn_slowpath_common+0x69/0x90)
[<c0321c5d>] (warn_slowpath_common) from [<c0321cf3>] (warn_slowpath_null+0x17/0x1c)
[<c0321cf3>] (warn_slowpath_null) from [<c038ee9d>] (ftrace_bug+0x1ad/0x230)
[<c038ee9d>] (ftrace_bug) from [<c038f1f9>] (ftrace_process_locs+0x27d/0x444)
[<c038f1f9>] (ftrace_process_locs) from [<c08915bd>] (ftrace_init+0x91/0xe8)
[<c08915bd>] (ftrace_init) from [<c0885a67>] (start_kernel+0x34b/0x358)
[<c0885a67>] (start_kernel) from [<00308095>] (0x308095)
---[ end trace cb88537fdc8fa200 ]---
ftrace failed to modify [<c031266c>] prealloc_fixed_plts+0x8/0x60
actual: 44:f2:e1:36
ftrace record flags: 0
(0) expected tramp: c03143e9
Scenario 2, ARMv4T
==================
ftrace: allocating 14435 entries in 43 pages
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2029 ftrace_bug+0x204/0x310
CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.5 #1
Hardware name: Cirrus Logic EDB9302 Evaluation Board
[<c0010a24>] (unwind_backtrace) from [<c000ecb0>] (show_stack+0x20/0x2c)
[<c000ecb0>] (show_stack) from [<c03c72e8>] (dump_stack+0x20/0x30)
[<c03c72e8>] (dump_stack) from [<c0021c18>] (__warn+0xdc/0x104)
[<c0021c18>] (__warn) from [<c0021d7c>] (warn_slowpath_null+0x4c/0x5c)
[<c0021d7c>] (warn_slowpath_null) from [<c0095360>] (ftrace_bug+0x204/0x310)
[<c0095360>] (ftrace_bug) from [<c04dabac>] (ftrace_init+0x3b4/0x4d4)
[<c04dabac>] (ftrace_init) from [<c04cef4c>] (start_kernel+0x20c/0x410)
[<c04cef4c>] (start_kernel) from [<00000000>] ( (null))
---[ end trace 0506a2f5dae6b341 ]---
ftrace failed to modify
[<c000c350>] perf_trace_sys_exit+0x5c/0xe8
actual: 1e:ff:2f:e1
Initializing ftrace call sites
ftrace record flags: 0
(0)
expected tramp: c000fb24
The analysis for this problem has been already performed previously,
refer to the link below.
Fix the above problems by allowing only selected reloc types in
__mcount_loc. The list itself comes from the legacy recordmcount.pl
script.
Link: https://lore.kernel.org/lkml/56961010.6000806@pengutronix.de/
Cc: stable@vger.kernel.org
Fixes: ed60453fa8 ("ARM: 6511/1: ftrace: add ARM support for C version of recordmcount")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Bartosz Golaszewski reports that when "make {menu,n,g,x}config" fails
due to missing packages, a temporary file is left over, which is not
ignored by git.
For example, if GTK+ is not installed:
$ make gconfig
*
* Unable to find the GTK+ installation. Please make sure that
* the GTK+ 2.0 development package is correctly installed.
* You need gtk+-2.0 gmodule-2.0 libglade-2.0
*
scripts/kconfig/Makefile:208: recipe for target 'scripts/kconfig/gconf-cfg' failed
make[1]: *** [scripts/kconfig/gconf-cfg] Error 1
Makefile:567: recipe for target 'gconfig' failed
make: *** [gconfig] Error 2
$ git status
HEAD detached at v5.4
Untracked files:
(use "git add <file>..." to include in what will be committed)
scripts/kconfig/gconf-cfg.tmp
nothing added to commit but untracked files present (use "git add" to track)
This is because the check scripts are run with filechk, which misses
to clean up the temporary file on failure.
When the line
{ $(filechk_$(1)); } > $@.tmp;
... fails, it exits immediately due to the 'set -e'. Use trap to make
sure to delete the temporary file on exit.
For extra safety, I replaced $@.tmp with $(dot-target).tmp to make it
a hidden file.
Reported-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 8d5290149e ("[SPARC]: Deal with glibc changing macro names in
modpost.c") was more than 14 years ago. STT_SPARC_REGISTER is hopefully
defined in elf.h of recent C libraries.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Similar to 'cc-option' or 'ld-option', it is occasionally necessary to
check whether the assembler supports certain ISA extensions. In the
arm64 code we currently do this in Makefile with an additional define:
lseinstr := $(call as-instr,.arch_extension lse,-DCONFIG_AS_LSE=1)
Add the 'as-instr' option so that it can be used in Kconfig directly:
def_bool $(as-instr,.arch_extension lse)
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
bpf_helpers_doc.py script, used to generate bpf_helper_defs.h, unconditionally
emits one informational message to stderr. Remove it and preserve stderr to
contain only relevant errors. Also make sure script invocations command is
muted by default in libbpf's Makefile.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200113073143.1779940-3-andriin@fb.com
Remove a bunch of files not used during external module builds:
- foreign architecture headers
- subtree Makefiles
- Kconfig files
- perl scripts
On amd64 system this looses a third of the resulting .deb size.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
strncasecmp() & strcasecmp() functions are declared in strings.h, not
string.h. On most environments the former is implicitly included by
the latter but on some setups, building menuconfig results in the
following warning:
HOSTCC scripts/kconfig/mconf.o
scripts/kconfig/mconf.c: In function ‘search_conf’:
scripts/kconfig/mconf.c:423:6: warning: implicit declaration of function ‘strncasecmp’ [-Wimplicit-function-declaration]
if (strncasecmp(dialog_input_result, CONFIG_, strlen(CONFIG_)) == 0)
^~~~~~~~~~~
scripts/kconfig/mconf.c: In function ‘main’:
scripts/kconfig/mconf.c:1021:8: warning: implicit declaration of function ‘strcasecmp’ [-Wimplicit-function-declaration]
if (!strcasecmp(mode, "single_menu"))
^~~~~~~~~~
Fix it by explicitly including strings.h.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When we generate the help text of a symbol (e.g. when a user presses '?'
in menuconfig), we do two things:
1. We iterate through every prompt that belongs to that symbol,
printing its text and its location in the menu tree.
2. We print symbol-wide information that's not linked to a particular
prompt, such as what it selects/is selected by and what it
implies/is implied by.
Each prompt we print for 1 starts with a line that's not indented
indicating where the prompt is defined, then continues with indented
lines that describe properties of that particular definition.
Once we get to 2, however, we print all the global data indented as
well! Visually, this makes it look like the symbol-wide data is
associated with the last prompt we happened to print rather than
the symbol as a whole.
Fix this by removing the indentation for symbol-wide information.
Before:
Symbol: CPU_FREQ [=n]
Type : bool
Defined at drivers/cpufreq/Kconfig:4
Prompt: CPU Frequency scaling
Location:
-> CPU Power Management
-> CPU Frequency scaling
Selects: SRCU [=n]
Selected by [n]:
- ARCH_SA1100 [=n] && <choice>
After:
Symbol: CPU_FREQ [=n]
Type : bool
Defined at drivers/cpufreq/Kconfig:4
Prompt: CPU Frequency scaling
Location:
-> CPU Power Management
-> CPU Frequency scaling
Selects: SRCU [=n]
Selected by [n]:
- ARCH_SA1100 [=n] && <choice>
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
