The virt_mechanism reference there points to a section
called elsewhere (Virtualization mitigation). Also, it is
not used anywere.
Besides that, it conflicts with a label with the same name
inside:
Documentation/admin-guide/hw-vuln/mds.rst
Perhaps added due to some cut-and-paste?
Anyway, as this is not used, let's just get rid of it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/681c8e2916bf4943ac2277f181668bfbc5fdbc01.1583250595.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Trim the title a bit, since it's relatively long. Add `binfmt_misc` to
make it easier to search for the feature by its common name.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20200308210935.7273-1-j.neuschaefer@gmx.net
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
When converting and moving nfsroot.txt to nfsroot.rst the references to
the old text file was not updated to match the change, fix this.
Fixes: f9a9349846 ("Documentation: nfsroot.txt: convert to ReST")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200212181332.520545-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The set of WQ_SYSFS workqueues should be displayed using
"ls /sys/devices/virtual/workqueue", add the missing '/'.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200225124052.1506-1-yuzenghui@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Annotate references to other documents to make them clickable.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20200228000653.1572553-6-kuba@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
We need literal sections otherwise the entire example is rendered
as a single line.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20200228000653.1572553-5-kuba@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
We need a literal section, like few paragraphs below.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20200228000653.1572553-4-kuba@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
If there is an empty line between item and description
Sphinx does not emphasize the item. First half of the
list does not have the empty line and is emphasized
correctly.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20200228000653.1572553-3-kuba@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Fix tabs vs spaces issue which cases the line to be considered
a new list entry.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20200228000653.1572553-2-kuba@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This script allows sysctl documentation to be checked against the
kernel source code, to identify missing or obsolete entries. Running
it against 5.5 shows for example that sysctl/kernel.rst has two
obsolete entries and is missing 52 entries.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Based on the implementation in arch/x86/kernel/acpi/sleep.c, in
particular the acpi_sleep_setup() function.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
When both the documentation and the data files lived in
Documentation/EDID, this wasn't necessary, but both have
been moved to other directories in the meantime.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This document describes actions that an admin can do, rather than
interfaces available to driver developers, so admin-guide seems to
be a more appropriate place for it.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The description of panic doesn’t cover all the supported scenarios;
this patch fixes that, describing the three possibilities (no reboot,
immediate reboot, reboot after a delay).
Based on the implementation in kernel/panic.c.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This describes the SPARC-specific stop-a sysctl entry, which was
previously listed in kernel.rst but not documented.
Base on the implementation in arch/sparc/kernel/setup_{32,64}.c and
kernel/panic.c.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This adds short descriptions of msgmax, msgmnb, msgmni, and shmmni,
which were previously listed in kernel.rst but not described.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The l2cr sysctl entry was removed in commit c2f3dabefa ("sysctl:
kill binary sysctl KERN_PPC_L2CR"), this removes the corresponding
documentation.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This fits nicely in sysctl/kernel.rst, merge it (and rephrase it)
instead of linking to it.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This updates sysctl/kernel.rst to use ReStructured Text more fully:
* the list of files is now the table of contents (old entries with no
corresponding sections are added as empty sections for now);
* code references and commands are formatted as code, except for
function names which end up linked to the appropriate documentation;
* links are used to point to other documentation and other sections;
* tables are used to make lists of values more readable (as already
done for some sections);
* in heavily-reworked paragraphs, sentences are wrapped individually,
to make future diffs easier to read.
The first mention of the kernel version is dropped. The second
mention, saying that the document is accurate for 2.2, is preserved
for now; I will update that once the document really is accurate for a
current kernel release.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
cmdlinepart.c has been moved to drivers/mtd/parsers/.
Fixes: a3f12a35c9 ("mtd: parsers: Move CMDLINE parser")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
There is somehow no description of %c corename format specifier for
/proc/sys/kernel/core_pattern. The %c corename format specifier is
used by user-space application such as systemd-coredump, so it should
be documented.
To find where %c is handled in the kernel source code, look at
function format_corename() in fs/coredump.c.
Signed-off-by: HATAYAMA Daisuke <d.hatayama@fujitsu.com>
Link: https://lore.kernel.org/r/TYAPR01MB4014714BB2ACE425BB6EC6B7951A0@TYAPR01MB4014.jpnprd01.prod.outlook.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Update the recently merged CPR (Core Power Reduction) support in the
AVS (Adaptive Voltage Scaling) subsystem (Brendan Higgins, Nathan
Chancellor, Niklas Cassel) and the rockchip-io AVS driver (Heiko
Stuebner), add two more module parameters to intel_idle on top of the
recently merged material, clean up a piece of cpuidle documentation
and consolidate system sleep states documentation (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=Yc9a
-----END PGP SIGNATURE-----
Merge tag 'pm-5.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
- Update the recently merged CPR (Core Power Reduction) support in the
AVS (Adaptive Voltage Scaling) subsystem (Brendan Higgins, Nathan
Chancellor, Niklas Cassel)
- Update the rockchip-io AVS driver (Heiko Stuebner)
- Add two more module parameters to intel_idle on top of the recently
merged material (Rafael Wysocki)
- Clean up a piece of cpuidle documentation and consolidate system
sleep states documentation (Rafael Wysocki)
* tag 'pm-5.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: Documentation: Clean up PM QoS description
Documentation: admin-guide: PM: Update sleep states documentation
intel_idle: Introduce 'states_off' module parameter
intel_idle: Introduce 'use_acpi' module parameter
power: avs: qcom-cpr: Avoid clang -Wsometimes-uninitialized in cpr_scale
power: avs: qcom-cpr: add unspecified HAS_IOMEM dependency
PM / AVS: rockchip-io: fix the supply naming for the emmc supply on px30
power: avs: qcom-cpr: add a printout after the driver has been initialized
- Added new "bootconfig".
Looks for a file appended to initrd to add boot config options.
This has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and
kprobe events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXjtAURQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qshOAQDzopQmvAVrrI6oogghr8JQA30Z2yqT
i+Ld7vPWL2MV9wEA1S+zLGDSYrj8f/vsCq6BxRYT1ApO+YtmY6LTXiUejwg=
=WNds
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Added new "bootconfig".
This looks for a file appended to initrd to add boot config options,
and has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and kprobe
events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
* tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits)
bootconfig: Show the number of nodes on boot message
tools/bootconfig: Show the number of bootconfig nodes
bootconfig: Add more parse error messages
bootconfig: Use bootconfig instead of boot config
ftrace: Protect ftrace_graph_hash with ftrace_sync
ftrace: Add comment to why rcu_dereference_sched() is open coded
tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
tracing: Annotate ftrace_graph_hash pointer with __rcu
bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline
tracing: Use seq_buf for building dynevent_cmd string
tracing: Remove useless code in dynevent_arg_pair_add()
tracing: Remove check_arg() callbacks from dynevent args
tracing: Consolidate some synth_event_trace code
tracing: Fix now invalid var_ref_vals assumption in trace action
tracing: Change trace_boot to use synth_event interface
tracing: Move tracing selftests to bottom of menu
tracing: Move mmio tracer config up with the other tracers
tracing: Move tracing test module configs together
tracing: Move all function tracing configs together
tracing: Documentation for in-kernel synthetic event API
...
As the bootconfig is appended to the initrd it is not as easy to modify as
the kernel command line. If there's some issue with the kernel, and the
developer wants to boot a pristine kernel, it should not be needed to modify
the initrd to remove the bootconfig for a single boot.
As bootconfig is silently added (if the admin does not know where to look
they may not know it's being loaded). It should be explicitly added to the
kernel cmdline. The loading of the bootconfig is only done if "bootconfig"
is on the kernel command line. This will let admins know that the kernel
command line is extended.
Note, after adding printk()s for when the size is too great or the checksum
is wrong, exposed that the current method always looked for the boot config,
and if this size and checksum matched, it would parse it (as if either is
wrong a printk has been added to show this). It's better to only check this
if the boot config is asked to be looked for.
Link: https://lore.kernel.org/r/CAHk-=wjfjO+h6bQzrTf=YCZA53Y3EDyAs3Z4gEsT7icA3u_Psw@mail.gmail.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Clean up the language in one paragraph in the PM QoS description in
Documentation/admin-guide/pm/cpuidle.rst.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is some information in Documentation/power/interface.rst that
is still missing from Documentation/admin-guide/pm/sleep-states.rst
and really should be present in there, so update the latter by
adding that information to it and delete the former (as it becomes
redundant after that and it is somewhat outdated).
While at it, clean up some assorted pieces of sleep-states.rst a bit.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In certain system configurations it may not be desirable to use some
C-states assumed to be available by intel_idle and the driver needs
to be prevented from using them even before the cpuidle sysfs
interface becomes accessible to user space. Currently, the only way
to achieve that is by setting the 'max_cstate' module parameter to a
value lower than the index of the shallowest of the C-states in
question, but that may be overly intrusive, because it effectively
makes all of the idle states deeper than the 'max_cstate' one go
away (and the C-state to avoid may be in the middle of the range
normally regarded as available).
To allow that limitation to be overcome, introduce a new module
parameter called 'states_off' to represent a list of idle states to
be disabled by default in the form of a bitmask and update the
documentation to cover it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For diagnostics, it is generally useful to be able to make intel_idle
take the system's ACPI tables into consideration even if that is not
required for the processor model in there, so introduce a new module
parameter, 'use_acpi', to make that happen and update the documentation
to cover it.
While at it, fix the 'no_acpi' module parameter name in the
documentation.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull updates from Andrew Morton:
"Most of -mm and quite a number of other subsystems: hotfixes, scripts,
ocfs2, misc, lib, binfmt, init, reiserfs, exec, dma-mapping, kcov.
MM is fairly quiet this time. Holidays, I assume"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
kcov: ignore fault-inject and stacktrace
include/linux/io-mapping.h-mapping: use PHYS_PFN() macro in io_mapping_map_atomic_wc()
execve: warn if process starts with executable stack
reiserfs: prevent NULL pointer dereference in reiserfs_insert_item()
init/main.c: fix misleading "This architecture does not have kernel memory protection" message
init/main.c: fix quoted value handling in unknown_bootoption
init/main.c: remove unnecessary repair_env_string in do_initcall_level
init/main.c: log arguments and environment passed to init
fs/binfmt_elf.c: coredump: allow process with empty address space to coredump
fs/binfmt_elf.c: coredump: delete duplicated overflow check
fs/binfmt_elf.c: coredump: allocate core ELF header on stack
fs/binfmt_elf.c: make BAD_ADDR() unlikely
fs/binfmt_elf.c: better codegen around current->mm
fs/binfmt_elf.c: don't copy ELF header around
fs/binfmt_elf.c: fix ->start_code calculation
fs/binfmt_elf.c: smaller code generation around auxv vector fill
lib/find_bit.c: uninline helper _find_next_bit()
lib/find_bit.c: join _find_next_bit{_le}
uapi: rename ext2_swab() to swab() and share globally in swab.h
lib/scatterlist.c: adjust indentation in __sg_alloc_table
...
Add the new kernel command line parameter 'dfltcc=' to configure s390
zlib hardware support.
Format: { on | off | def_only | inf_only | always }
on: s390 zlib hardware support for compression on
level 1 and decompression (default)
off: No s390 zlib hardware support
def_only: s390 zlib hardware support for deflate
only (compression on level 1)
inf_only: s390 zlib hardware support for inflate
only (decompression)
always: Same as 'on' but ignores the selected compression
level always using hardware support (used for debugging)
Link: http://lkml.kernel.org/r/20200103223334.20669-5-zaslonko@linux.ibm.com
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Eduard Shishkin <edward6@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
handle inode locking in the read/write paths, and improving the
performance of Direct I/O overwrites. We also now record the error
code which caused the first and most recent ext4_error() report in the
superblock, to make it easier to root cause problems in production
systems. There are also many of the usual cleanups and miscellaneous
bug fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl4yBf0ACgkQ8vlZVpUN
gaOK8Af9EsY1vyR/IvEosfXJoKIqnTXN1SLt94iAOUh6dNeVNcyv1SIzRGFrpmsg
uHY02EkcTl68b/AjV7ieDpOnOSmlP7NzynuVoar2hrjKX0MzpEu03Vv1a3dUQKuU
zcdchi83EwRjEvegsNK/VF3FFadk3TtC7x+7o6p840V6OAyp5CXhjm1akJqIJwvd
A4gTpruTSRIFg6Jj36HEDNRgSAeILed3wC7Ywtxt51tLK7Lp/qB1EuvYodMQRvGz
d0fRhbNHKepVYfxwpDUDMFnrqDPZ/SZGF73XBxP2zHd6SXy9dBLzGsRL+oj9tTUg
YQJtt4Yxjjg8Q1UrMyMRzQpi4S8dAQ==
=pVeR
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"This merge window, we've added some performance improvements in how we
handle inode locking in the read/write paths, and improving the
performance of Direct I/O overwrites.
We also now record the error code which caused the first and most
recent ext4_error() report in the superblock, to make it easier to
root cause problems in production systems.
There are also many of the usual cleanups and miscellaneous bug fixes"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (49 commits)
jbd2: clean __jbd2_journal_abort_hard() and __journal_abort_soft()
jbd2: make sure ESHUTDOWN to be recorded in the journal superblock
ext4, jbd2: ensure panic when aborting with zero errno
jbd2: switch to use jbd2_journal_abort() when failed to submit the commit record
jbd2_seq_info_next should increase position index
jbd2: remove pointless assertion in __journal_remove_journal_head
ext4,jbd2: fix comment and code style
jbd2: delete the duplicated words in the comments
ext4: fix extent_status trace points
ext4: fix symbolic enum printing in trace output
ext4: choose hardlimit when softlimit is larger than hardlimit in ext4_statfs_project()
ext4: fix race conditions in ->d_compare() and ->d_hash()
ext4: make dioread_nolock the default
ext4: fix extent_status fragmentation for plain files
jbd2: clear JBD2_ABORT flag before journal_reset to update log tail info when load journal
ext4: drop ext4_kvmalloc()
ext4: Add EXT4_IOC_FSGETXATTR/EXT4_IOC_FSSETXATTR to compat_ioctl
ext4: remove unused macro MPAGE_DA_EXTENT_TAIL
ext4: add missing braces in ext4_ext_drop_refs()
ext4: fix some nonstandard indentation in extents.c
...
unlikely case that a DM device is created without a DM table and
then accessed due to upper-layer userspace code or user error.
- Fix DM thin-provisioning's metadata_pre_commit_callback to not use
memory after it is free'd. Also refactor code to disallow changing
the thin-pool's data device once in use -- doing so guarantees smae
lifetime of pool's data device relative to the pool metadata.
- Fix DM space maps used by DM thinp and DM cache to avoid reuse of a
already used block. This race was identified with extremely heavy
snapshot use in the context of DM thin provisioning.
- Fix DM raid's table status relative to an active rebuild.
- Fix DM crypt to use GFP_NOIO rather than GFP_NOFS in call to
skcipher_request_alloc(). Also fix benbi IV constructor crash if
used in authenticated mode.
- Add DM crypt support for Elephant diffuser to allow for Bitlocker
compatibility.
- Fix DM verity target to not prefetch hash blocks for data that has
already been verified.
- Fix DM writecache's incorrect flush sequence during commit when in
SSD mode.
- Improve DM writecache's sequential write performance on SSDs.
- Add DM zoned target support for zone sizes smaller than 128MiB.
- Add DM multipath 'queue_if_no_path_timeout_secs' module param to
allow timeout if path isn't reinstated. This allows users a kernel
safety-net against IO hanging indefinitely, due to no active paths,
that has historically only been provided by multipathd userspace.
- Various DM code cleanups to use true/false rather than 1/0, a
variable rename in dm-dust, and fix for a math error in comment for
DM thin metadata's ondisk format.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl4xvEITHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWipYCAC+sX8q/XBDRi4WDCTvCRCcBfz9g9ZO
oygimV64oYf08JiDL54Z29T0EjwGR6DcZB0nEyjhl2/lU4bPwd4kLc/VHwjf44ay
oUJWZxp8Az7pIWjQQ5oC09it8gLmDpBdq2Z146tEDgYrERnH8BgDObYm3ihXwi9f
zMoET8rIzNltMUo6jIumjzxPcLbBsRTnC35mE//PZkMiUUI3ucNWuOhD/ICDe/Tu
VQ9rNtJx01xs07bFKT4OYR2Oc7xrtWEOMDKeSFz16j8t28wywLFz3EPXRG7tKM3l
6CKBFdRqPSL6v2Mr1QD8YwJJCPLsCoOQ14aKn2sDPG8EgQMnh7R2g6OT
=mfnM
-----END PGP SIGNATURE-----
Merge tag 'for-5.6/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fix DM core's potential for q->make_request_fn NULL pointer in the
unlikely case that a DM device is created without a DM table and then
accessed due to upper-layer userspace code or user error.
- Fix DM thin-provisioning's metadata_pre_commit_callback to not use
memory after it is free'd. Also refactor code to disallow changing
the thin-pool's data device once in use -- doing so guarantees smae
lifetime of pool's data device relative to the pool metadata.
- Fix DM space maps used by DM thinp and DM cache to avoid reuse of a
already used block. This race was identified with extremely heavy
snapshot use in the context of DM thin provisioning.
- Fix DM raid's table status relative to an active rebuild.
- Fix DM crypt to use GFP_NOIO rather than GFP_NOFS in call to
skcipher_request_alloc(). Also fix benbi IV constructor crash if used
in authenticated mode.
- Add DM crypt support for Elephant diffuser to allow for Bitlocker
compatibility.
- Fix DM verity target to not prefetch hash blocks for data that has
already been verified.
- Fix DM writecache's incorrect flush sequence during commit when in
SSD mode.
- Improve DM writecache's sequential write performance on SSDs.
- Add DM zoned target support for zone sizes smaller than 128MiB.
- Add DM multipath 'queue_if_no_path_timeout_secs' module param to
allow timeout if path isn't reinstated. This allows users a kernel
safety-net against IO hanging indefinitely, due to no active paths,
that has historically only been provided by multipathd userspace.
- Various DM code cleanups to use true/false rather than 1/0, a
variable rename in dm-dust, and fix for a math error in comment for
DM thin metadata's ondisk format.
* tag 'for-5.6/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (21 commits)
dm: fix potential for q->make_request_fn NULL pointer
dm writecache: improve performance of large linear writes on SSDs
dm mpath: Add timeout mechanism for queue_if_no_path
dm thin: change data device's flush_bio to be member of struct pool
dm thin: don't allow changing data device during thin-pool reload
dm thin: fix use-after-free in metadata_pre_commit_callback
dm thin metadata: use pool locking at end of dm_pool_metadata_close
dm writecache: fix incorrect flush sequence when doing SSD mode commit
dm crypt: fix benbi IV constructor crash if used in authenticated mode
dm crypt: Implement Elephant diffuser for Bitlocker compatibility
dm space map common: fix to ensure new block isn't already in use
dm verity: don't prefetch hash blocks for already-verified data
dm crypt: fix GFP flags passed to skcipher_request_alloc()
dm thin metadata: Fix trivial math error in on-disk format documentation
dm thin metadata: use true/false for bool variable
dm snapshot: use true/false for bool variable
dm bio prison v2: use true/false for bool variable
dm mpath: use true/false for bool variable
dm zoned: support zone sizes smaller than 128MiB
dm raid: table line rebuild status fixes
...
couple of things of note:
- Conversion of the NFS documentation to RST
- A new document on how to help with documentation (and a maintainer
profile entry too)
Plus the usual collection of typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl4wnWwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YFPIH/069z5bJMrT3QRzENu8A9Elz76IXoy7pJOmJ
53Ml5+c4sYpvV3o6d9n5TSvdy1pH0Shw73FbJzUIMj0ZCcHysWVO1eBDlcj8soJQ
UonCXbKc+30AJBoKZqAC3jjFw0/fXwD1x+GzQo+l0LMQDOc0i0Luv8/riR5c9hEO
5TOXB2GyhHnbSFxzcN9afmBsuNz1cPa/fg5q6zL+5Q/fUUOJ6IcYwq165P2EwZdm
KRah299VU/XhrYlHJX7OZX3ck9+PaYURSpv4KH81J4jhmoBWAw5jPt77Qw8aN3w9
LcNip+qgpx9wC7OgBiqdJkKcvsNy76pfDhUOj+XarGisA8031d0=
=9m/7
-----END PGP SIGNATURE-----
Merge tag 'docs-5.6' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a relatively quiet cycle for documentation, but there's
still a couple of things of note:
- Conversion of the NFS documentation to RST
- A new document on how to help with documentation (and a maintainer
profile entry too)
Plus the usual collection of typo fixes, etc"
* tag 'docs-5.6' of git://git.lwn.net/linux: (40 commits)
docs: filesystems: add overlayfs to index.rst
docs: usb: remove some broken references
scripts/find-unused-docs: Fix massive false positives
docs: nvdimm: use ReST notation for subsection
zram: correct documentation about sysfs node of huge page writeback
Documentation: zram: various fixes in zram.rst
Add a maintainer entry profile for documentation
Add a document on how to contribute to the documentation
docs: Keep up with the location of NoUri
Documentation: Call out example SYM_FUNC_* usage as x86-specific
Documentation: nfs: fault_injection: convert to ReST
Documentation: nfs: pnfs-scsi-server: convert to ReST
Documentation: nfs: convert pnfs-block-server to ReST
Documentation: nfs: idmapper: convert to ReST
Documentation: convert nfsd-admin-interfaces to ReST
Documentation: nfs-rdma: convert to ReST
Documentation: nfsroot.rst: COSMETIC: refill a paragraph
Documentation: nfsroot.txt: convert to ReST
Documentation: convert nfs.txt to ReST
Documentation: filesystems: convert vfat.txt to RST
...
Here is the big USB and Thunderbolt and PHY driver updates for 5.6-rc1.
With the advent of USB4, "Thunderbolt" has really become USB4, so the
renaming of the Kconfig option and starting to share subsystem code has
begun, hence both subsystems coming in through the same tree here.
PHY driver updates also touched USB drivers, so that is coming in
through here as well.
Major stuff included in here are:
- USB 4 initial support added (i.e. Thunderbolt)
- musb driver updates
- USB gadget driver updates
- PHY driver updates
- USB PHY driver updates
- lots of USB serial stuff fixed up
- USB typec updates
- USB-IP fixes
- lots of other smaller USB driver updates
All of these have been in linux-next for a while now (the usb-serial
tree is already tested in linux-next on its own before merged into
here), with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXjFTNw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynpKQCgrh2FoobS2x0oFg/OUHdjokQV/BYAoJGWLOmt
8S5cnsCuLq3w5qpCcBva
=PMGd
-----END PGP SIGNATURE-----
Merge tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt/PHY driver updates from Greg KH:
"Here is the big USB and Thunderbolt and PHY driver updates for
5.6-rc1.
With the advent of USB4, "Thunderbolt" has really become USB4, so the
renaming of the Kconfig option and starting to share subsystem code
has begun, hence both subsystems coming in through the same tree here.
PHY driver updates also touched USB drivers, so that is coming in
through here as well.
Major stuff included in here are:
- USB 4 initial support added (i.e. Thunderbolt)
- musb driver updates
- USB gadget driver updates
- PHY driver updates
- USB PHY driver updates
- lots of USB serial stuff fixed up
- USB typec updates
- USB-IP fixes
- lots of other smaller USB driver updates
All of these have been in linux-next for a while now (the usb-serial
tree is already tested in linux-next on its own before merged into
here), with no reported issues"
[ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA
that causes configuration warnings - Linus ]
* tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
Doc: ABI: add usb charger uevent
usb: phy: show USB charger type for user
usb: cdns3: fix spelling mistake and rework grammar in text
usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
USB: serial: cyberjack: fix spelling mistake "To" -> "Too"
USB: serial: ir-usb: simplify endpoint check
USB: serial: ir-usb: make set_termios synchronous
USB: serial: ir-usb: fix IrLAP framing
USB: serial: ir-usb: fix link-speed handling
USB: serial: ir-usb: add missing endpoint sanity check
usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW
usb: typec: wcove: fix "op-sink-microwatt" default that was in mW
usb: dwc3: pci: add ID for the Intel Comet Lake -V variant
usb: typec: tcpci: mask event interrupts when remove driver
usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186
usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined
usb: chipidea: handle single role for usb role class
usb: musb: fix spelling mistake: "periperal" -> "peripheral"
phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS
USB: usbfs: Always unlink URBs in reverse order
...
Pull EFI updates from Ingo Molnar:
"The main changes in this cycle were:
- Cleanup of the GOP [graphics output] handling code in the EFI stub
- Complete refactoring of the mixed mode handling in the x86 EFI stub
- Overhaul of the x86 EFI boot/runtime code
- Increase robustness for mixed mode code
- Add the ability to disable DMA at the root port level in the EFI
stub
- Get rid of RWX mappings in the EFI memory map and page tables,
where possible
- Move the support code for the old EFI memory mapping style into its
only user, the SGI UV1+ support code.
- plus misc fixes, updates, smaller cleanups.
... and due to interactions with the RWX changes, another round of PAT
cleanups make a guest appearance via the EFI tree - with no side
effects intended"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
efi/x86: Disable instrumentation in the EFI runtime handling code
efi/libstub/x86: Fix EFI server boot failure
efi/x86: Disallow efi=old_map in mixed mode
x86/boot/compressed: Relax sed symbol type regex for LLVM ld.lld
efi/x86: avoid KASAN false positives when accessing the 1: 1 mapping
efi: Fix handling of multiple efi_fake_mem= entries
efi: Fix efi_memmap_alloc() leaks
efi: Add tracking for dynamically allocated memmaps
efi: Add a flags parameter to efi_memory_map
efi: Fix comment for efi_mem_type() wrt absent physical addresses
efi/arm: Defer probe of PCIe backed efifb on DT systems
efi/x86: Limit EFI old memory map to SGI UV machines
efi/x86: Avoid RWX mappings for all of DRAM
efi/x86: Don't map the entire kernel text RW for mixed mode
x86/mm: Fix NX bit clearing issue in kernel_map_pages_in_pgd
efi/libstub/x86: Fix unused-variable warning
efi/libstub/x86: Use mandatory 16-byte stack alignment in mixed mode
efi/libstub/x86: Use const attribute for efi_is_64bit()
efi: Allow disabling PCI busmastering on bridges during boot
efi/x86: Allow translating 64-bit arguments for mixed mode calls
...
Pull RCU updates from Ingo Molnar:
"The RCU changes in this cycle were:
- Expedited grace-period updates
- kfree_rcu() updates
- RCU list updates
- Preemptible RCU updates
- Torture-test updates
- Miscellaneous fixes
- Documentation updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits)
rcu: Remove unused stop-machine #include
powerpc: Remove comment about read_barrier_depends()
.mailmap: Add entries for old paulmck@kernel.org addresses
srcu: Apply *_ONCE() to ->srcu_last_gp_end
rcu: Switch force_qs_rnp() to for_each_leaf_node_cpu_mask()
rcu: Move rcu_{expedited,normal} definitions into rcupdate.h
rcu: Move gp_state_names[] and gp_state_getname() to tree_stall.h
rcu: Remove the declaration of call_rcu() in tree.h
rcu: Fix tracepoint tracking RCU CPU kthread utilization
rcu: Fix harmless omission of "CONFIG_" from #if condition
rcu: Avoid tick_dep_set_cpu() misordering
rcu: Provide wrappers for uses of ->rcu_read_lock_nesting
rcu: Use READ_ONCE() for ->expmask in rcu_read_unlock_special()
rcu: Clear ->rcu_read_unlock_special only once
rcu: Clear .exp_hint only when deferred quiescent state has been reported
rcu: Rename some instance of CONFIG_PREEMPTION to CONFIG_PREEMPT_RCU
rcu: Remove kfree_call_rcu_nobatch()
rcu: Remove kfree_rcu() special casing and lazy-callback handling
rcu: Add support for debug_objects debugging for kfree_rcu()
rcu: Add multiple in-flight batches of kfree_rcu() work
...
- A mechanism to shield isolated tasks from managed interrupts:
The affinity of managed interrupts is completely controlled by the
kernel and user space has no influence on them. The reason is that
the automatically assigned affinity correlates to the multi-queue
CPU handling of block devices.
If the generated affinity mask spaws both housekeeping and isolated CPUs
the interrupt could be routed to an isolated CPU which would then be
disturbed by I/O submitted by a housekeeping CPU.
The new mechamism ensures that as long as one housekeeping CPU is online
in the assigned affinity mask the interrupt is routed to a housekeeping
CPU.
If there is no online housekeeping CPU in the affinity mask, then the
interrupt is routed to an isolated CPU to keep the device queue intact,
but unless the isolated CPU submits I/O by itself these interrupts are
not raised.
- A small addon to the device tree irqdomain core code to avoid
duplication in irq chip drivers
- Conversion of the SiFive PLIC to hierarchical domains
- The usual pile of new irq chip drivers: SiFive GPIO, Aspeed SCI, NXP
INTMUX, Meson A1 GPIO
- The first cut of support for the new ARM GICv4.1
- The usual pile of fixes and improvements in core and driver code
-----BEGIN PGP SIGNATURE-----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=E2VR
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2020-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"The interrupt departement provides:
- A mechanism to shield isolated tasks from managed interrupts:
The affinity of managed interrupts is completely controlled by the
kernel and user space has no influence on them. The reason is that
the automatically assigned affinity correlates to the multi-queue
CPU handling of block devices.
If the generated affinity mask spaws both housekeeping and isolated
CPUs the interrupt could be routed to an isolated CPU which would
then be disturbed by I/O submitted by a housekeeping CPU.
The new mechamism ensures that as long as one housekeeping CPU is
online in the assigned affinity mask the interrupt is routed to a
housekeeping CPU.
If there is no online housekeeping CPU in the affinity mask, then
the interrupt is routed to an isolated CPU to keep the device queue
intact, but unless the isolated CPU submits I/O by itself these
interrupts are not raised.
- A small addon to the device tree irqdomain core code to avoid
duplication in irq chip drivers
- Conversion of the SiFive PLIC to hierarchical domains
- The usual pile of new irq chip drivers: SiFive GPIO, Aspeed SCI,
NXP INTMUX, Meson A1 GPIO
- The first cut of support for the new ARM GICv4.1
- The usual pile of fixes and improvements in core and driver code"
* tag 'irq-core-2020-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
genirq, sched/isolation: Isolate from handling managed interrupts
irqchip/gic-v4.1: Allow direct invalidation of VLPIs
irqchip/gic-v4.1: Suppress per-VLPI doorbell
irqchip/gic-v4.1: Add VPE INVALL callback
irqchip/gic-v4.1: Add VPE eviction callback
irqchip/gic-v4.1: Add VPE residency callback
irqchip/gic-v4.1: Add mask/unmask doorbell callbacks
irqchip/gic-v4.1: Plumb skeletal VPE irqchip
irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP
irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is set
irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP
irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation
irqchip/gic-v3: Add GICv4.1 VPEID size discovery
irqchip/gic-v3: Detect GICv4.1 supporting RVPEID
irqchip/gic-v3-its: Fix get_vlpi_map() breakage with doorbells
irqdomain: Fix a memory leak in irq_domain_push_irq()
irqchip: Add NXP INTMUX interrupt multiplexer support
dt-bindings: interrupt-controller: Add binding for NXP INTMUX interrupt multiplexer
irqchip: Define EXYNOS_IRQ_COMBINER
irqchip/meson-gpio: Add support for meson a1 SoCs
...
-----BEGIN PGP SIGNATURE-----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=2jFm
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20200127' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux update from Paul Moore:
"This is one of the bigger SELinux pull requests in recent years with
28 patches. Everything is passing our test suite and the highlights
are below:
- Mark CONFIG_SECURITY_SELINUX_DISABLE as deprecated. We're some time
away from actually attempting to remove this in the kernel, but the
only distro we know that still uses it (Fedora) is working on
moving away from this so we want to at least let people know we are
planning to remove it.
- Reorder the SELinux hooks to help prevent bad things when SELinux
is disabled at runtime. The proper fix is to remove the
CONFIG_SECURITY_SELINUX_DISABLE functionality (see above) and just
take care of it at boot time (e.g. "selinux=0").
- Add SELinux controls for the kernel lockdown functionality,
introducing a new SELinux class/permissions: "lockdown { integrity
confidentiality }".
- Add a SELinux control for move_mount(2) that reuses the "file {
mounton }" permission.
- Improvements to the SELinux security label data store lookup
functions to speed up translations between our internal label
representations and the visible string labels (both directions).
- Revisit a previous fix related to SELinux inode auditing and
permission caching and do it correctly this time.
- Fix the SELinux access decision cache to cleanup properly on error.
In some extreme cases this could limit the cache size and result in
a decrease in performance.
- Enable SELinux per-file labeling for binderfs.
- The SELinux initialized and disabled flags were wrapped with
accessors to ensure they are accessed correctly.
- Mark several key SELinux structures with __randomize_layout.
- Changes to the LSM build configuration to only build
security/lsm_audit.c when needed.
- Changes to the SELinux build configuration to only build the IB
object cache when CONFIG_SECURITY_INFINIBAND is enabled.
- Move a number of single-caller functions into their callers.
- Documentation fixes (/selinux -> /sys/fs/selinux).
- A handful of cleanup patches that aren't worth mentioning on their
own, the individual descriptions have plenty of detail"
* tag 'selinux-pr-20200127' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (28 commits)
selinux: fix regression introduced by move_mount(2) syscall
selinux: do not allocate ancillary buffer on first load
selinux: remove redundant allocation and helper functions
selinux: remove redundant selinux_nlmsg_perm
selinux: fix wrong buffer types in policydb.c
selinux: reorder hooks to make runtime disable less broken
selinux: treat atomic flags more carefully
selinux: make default_noexec read-only after init
selinux: move ibpkeys code under CONFIG_SECURITY_INFINIBAND.
selinux: remove redundant msg_msg_alloc_security
Documentation,selinux: fix references to old selinuxfs mount point
selinux: deprecate disabling SELinux and runtime
selinux: allow per-file labelling for binderfs
selinuxfs: use scnprintf to get real length for inode
selinux: remove set but not used variable 'sidtab'
selinux: ensure the policy has been loaded before reading the sidtab stats
selinux: ensure we cleanup the internal AVC counters on error in avc_update()
selinux: randomize layout of key structures
selinux: clean up selinux_enabled/disabled/enforcing_boot
selinux: remove unnecessary selinux cred request
...
Pull cgroup updates from Tejun Heo:
- cgroup2 interface for hugetlb controller. I think this was the last
remaining bit which was missing from cgroup2
- fixes for race and a spurious warning in threaded cgroup handling
- other minor changes
* 'for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
iocost: Fix iocost_monitor.py due to helper type mismatch
cgroup: Prevent double killing of css when enabling threaded cgroup
cgroup: fix function name in comment
mm: hugetlb controller for cgroups v2
- Update the ACPICA code in the kernel to upstream revision
20200110 including:
* Update of copyright notices to 2020 (Bob Moore).
* Dispatcher fix to always generate buffer objects for the ASL
create_field() operator (Maximilian Luz).
* Debugger cleanup (Colin Ian King).
* Disassembler change to create buffer fields in
ACPI_PARSE_LOAD_PASS1 (Erik Kaneda).
* UNIX line ending support for non-windows builds in acpisrc
(Erik Kaneda).
- Update the list of ACPICA maintainers (Rafael Wysocki).
- Add Intel Tiger Lake ACPI device IDs to the ACPI DPTF, ACPI fan,
int340x_thermal and intel-hid drivers (Gayatri Kammela).
- Make the ACPI fan driver create additional sysfs attributes to
expose power states information for fans (Srinivas Pandruvada).
- Fix up the ACPI battery driver to deal with unexpected battery
capacity information in a better way (Hans de Goede).
- Add ACPI backlight quirks for Lenovo E41-25/45 and MSI MS-7721
boards (Aaron Ma, Hans de Goede).
- Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch
to the ACPI button driver (Jason Ekstrand).
- Drop TIMER_DEFERRABLE from the GHES polling mode timer function
flags to make it run precisely at the configured time (Bhaskar
Upadhaya).
- Fix race condition related to the reference counting of query
handlers in the ACPI EC driver (Rafael Wysocki).
- Fix ACPI tools build issue (Zhengyuan Liu).
- Replace dma_request_slave_channel() with dma_request_chan() in the
firmware guide documentation for ACPI (Peter Ujfalusi).
- Fix typo in a comment and clean up function parameter data type
inconsistencies (Kacper Piwiński, Tian Tao).
-----BEGIN PGP SIGNATURE-----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=qOut
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to the most recent upstream
revision (20200110), add new hardware support to a handful of ACPI
drivers, make the ACPI fan driver expose power states information for
fans, add some more quirks, fix bugs and clean up assorted things.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20200110
including:
- Update of copyright notices to 2020 (Bob Moore).
- Dispatcher fix to always generate buffer objects for the ASL
create_field() operator (Maximilian Luz).
- Debugger cleanup (Colin Ian King).
- Disassembler change to create buffer fields in
ACPI_PARSE_LOAD_PASS1 (Erik Kaneda).
- UNIX line ending support for non-windows builds in acpisrc (Erik
Kaneda).
- Update the list of ACPICA maintainers (Rafael Wysocki).
- Add Intel Tiger Lake ACPI device IDs to the ACPI DPTF, ACPI fan,
int340x_thermal and intel-hid drivers (Gayatri Kammela).
- Make the ACPI fan driver create additional sysfs attributes to
expose power states information for fans (Srinivas Pandruvada).
- Fix up the ACPI battery driver to deal with unexpected battery
capacity information in a better way (Hans de Goede).
- Add ACPI backlight quirks for Lenovo E41-25/45 and MSI MS-7721
boards (Aaron Ma, Hans de Goede).
- Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch to
the ACPI button driver (Jason Ekstrand).
- Drop TIMER_DEFERRABLE from the GHES polling mode timer function
flags to make it run precisely at the configured time (Bhaskar
Upadhaya).
- Fix race condition related to the reference counting of query
handlers in the ACPI EC driver (Rafael Wysocki).
- Fix ACPI tools build issue (Zhengyuan Liu).
- Replace dma_request_slave_channel() with dma_request_chan() in the
firmware guide documentation for ACPI (Peter Ujfalusi).
- Fix typo in a comment and clean up function parameter data type
inconsistencies (Kacper Piwiński, Tian Tao)"
* tag 'acpi-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
ACPICA: Update version to 20200110
ACPICA: All acpica: Update copyrights to 2020 Including tool signons.
apei/ghes: Do not delay GHES polling
ACPI: button: Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch
ACPI: PPTT: Consistently use unsigned int as parameter type
ACPI: EC: Reference count query handlers under lock
ACPICA: Update the list of maintainers
ACPICA: Update version to 20191213
ACPICA: Dispatcher: always generate buffer objects for ASL create_field() operator
ACPICA: acpisrc: add unix line ending support for non-windows build
ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1
ACPICA: debugger: fix spelling mistake "adress" -> "address"
ACPI: video: Do not export a non working backlight interface on MSI MS-7721 boards
docs: firmware-guide: ACPI: Replace dma_request_slave_channel() with dma_request_chan()
thermal: int340x_thermal: Add Tiger Lake ACPI device IDs
platform/x86: intel-hid: Add Tiger Lake ACPI device ID
ACPI: fan: Add Tiger Lake ACPI device ID
ACPI: DPTF: Add Tiger Lake ACPI device IDs
ACPI: fan: Expose fan performance state information
tools/power/acpi: fix compilation error
...
* pm-cpuidle: (27 commits)
intel_idle: Clean up irtl_2_usec()
intel_idle: Move 3 functions closer to their callers
intel_idle: Annotate initialization code and data structures
intel_idle: Move and clean up intel_idle_cpuidle_devices_uninit()
intel_idle: Rearrange intel_idle_cpuidle_driver_init()
intel_idle: Clean up NULL pointer check in intel_idle_init()
intel_idle: Fold intel_idle_probe() into intel_idle_init()
intel_idle: Eliminate __setup_broadcast_timer()
cpuidle: fix cpuidle_find_deepest_state() kerneldoc warnings
cpuidle: sysfs: fix warnings when compiling with W=1
cpuidle: coupled: fix warnings when compiling with W=1
Documentation: admin-guide: PM: Add intel_idle document
cpuidle: arm: Enable compile testing for some of drivers
cpuidle: Drop unused cpuidle_driver_ref/unref() functions
intel_idle: Use ACPI _CST on server systems
intel_idle: Add module parameter to prevent ACPI _CST from being used
intel_idle: Allow ACPI _CST to be used for selected known processors
cpuidle: Allow idle states to be disabled by default
intel_idle: Use ACPI _CST for processor models without C-state tables
intel_idle: Refactor intel_idle_cpuidle_driver_init()
...
* acpi-battery:
ACPI / battery: Deal better with neither design nor full capacity not being reported
ACPI / battery: Use design-cap for capacity calculations if full-cap is not available
ACPI / battery: Deal with design or full capacity being reported as -1
* acpi-video:
ACPI: video: Do not export a non working backlight interface on MSI MS-7721 boards
ACPI: video: Use native backlight on Lenovo E41-25/45
ACPI: video: fix typo in comment
* acpi-fan:
ACPI: fan: Expose fan performance state information
* acpi-drivers:
thermal: int340x_thermal: Add Tiger Lake ACPI device IDs
platform/x86: intel-hid: Add Tiger Lake ACPI device ID
ACPI: fan: Add Tiger Lake ACPI device ID
ACPI: DPTF: Add Tiger Lake ACPI device IDs
