commit 56222b212e ("futex: Drop hb->lock before enqueueing on the
rtmutex") changed the locking rules in the futex code so that the hash
bucket lock is not longer held while the waiter is enqueued into the
rtmutex wait list. This made the lock and the unlock path symmetric, but
unfortunately the possible early exit from __rt_mutex_proxy_start() due to
a detected deadlock was not updated accordingly. That allows a concurrent
unlocker to observe inconsitent state which triggers the warning in the
unlock path.
futex_lock_pi() futex_unlock_pi()
lock(hb->lock)
queue(hb_waiter) lock(hb->lock)
lock(rtmutex->wait_lock)
unlock(hb->lock)
// acquired hb->lock
hb_waiter = futex_top_waiter()
lock(rtmutex->wait_lock)
__rt_mutex_proxy_start()
---> fail
remove(rtmutex_waiter);
---> returns -EDEADLOCK
unlock(rtmutex->wait_lock)
// acquired wait_lock
wake_futex_pi()
rt_mutex_next_owner()
--> returns NULL
--> WARN
lock(hb->lock)
unqueue(hb_waiter)
The problem is caused by the remove(rtmutex_waiter) in the failure case of
__rt_mutex_proxy_start() as this lets the unlocker observe a waiter in the
hash bucket but no waiter on the rtmutex, i.e. inconsistent state.
The original commit handles this correctly for the other early return cases
(timeout, signal) by delaying the removal of the rtmutex waiter until the
returning task reacquired the hash bucket lock.
Treat the failure case of __rt_mutex_proxy_start() in the same way and let
the existing cleanup code handle the eventual handover of the rtmutex
gracefully. The regular rt_mutex_proxy_start() gains the rtmutex waiter
removal for the failure case, so that the other callsites are still
operating correctly.
Add proper comments to the code so all these details are fully documented.
Thanks to Peter for helping with the analysis and writing the really
valuable code comments.
Fixes: 56222b212e ("futex: Drop hb->lock before enqueueing on the rtmutex")
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: Stefan Liebler <stli@linux.ibm.com>
Cc: Sebastian Sewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1901292311410.1950@nanos.tec.linutronix.de
Because wake_q_add() can imply an immediate wakeup (cmpxchg failure
case), we must not rely on the wakeup being delayed. However, commit:
e38513905e ("locking/rwsem: Rework zeroing reader waiter->task")
relies on exactly that behaviour in that the wakeup must not happen
until after we clear waiter->task.
[ peterz: Added changelog. ]
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: e38513905e ("locking/rwsem: Rework zeroing reader waiter->task")
Link: https://lkml.kernel.org/r/1543495830-2644-1-git-send-email-xieyongji@baidu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is already done for us internally by the signal machinery.
Link: http://lkml.kernel.org/r/20181116002713.8474-2-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull locking updates from Ingo Molnar:
"The main change in this cycle are initial preparatory bits of dynamic
lockdep keys support from Bart Van Assche.
There are also misc changes, a comment cleanup and a data structure
cleanup"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Clean up comment in nohz_idle_balance()
locking/lockdep: Stop using RCU primitives to access 'all_lock_classes'
locking/lockdep: Make concurrent lockdep_reset_lock() calls safe
locking/lockdep: Remove a superfluous INIT_LIST_HEAD() statement
locking/lockdep: Introduce lock_class_cache_is_registered()
locking/lockdep: Inline __lockdep_init_map()
locking/lockdep: Declare local symbols static
tools/lib/lockdep/tests: Test the lockdep_reset_lock() implementation
tools/lib/lockdep: Add dummy print_irqtrace_events() implementation
tools/lib/lockdep: Rename "trywlock" into "trywrlock"
tools/lib/lockdep/tests: Run lockdep tests a second time under Valgrind
tools/lib/lockdep/tests: Improve testing accuracy
tools/lib/lockdep/tests: Fix shellcheck warnings
tools/lib/lockdep/tests: Display compiler warning and error messages
locking/lockdep: Remove ::version from lock_class structure
Due to the previous patch all code that accesses the 'all_lock_classes'
list holds the graph lock. Hence use regular list primitives instead of
their RCU variants to access this list.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: johannes.berg@intel.com
Cc: tj@kernel.org
Link: https://lkml.kernel.org/r/20181207011148.251812-14-bvanassche@acm.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since zap_class() removes items from the all_lock_classes list and the
classhash_table, protect all zap_class() calls against concurrent
data structure modifications with the graph lock.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: johannes.berg@intel.com
Cc: tj@kernel.org
Link: https://lkml.kernel.org/r/20181207011148.251812-13-bvanassche@acm.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Initializing a list entry just before it is passed to list_add_tail_rcu()
is not necessary because list_add_tail_rcu() overwrites the next and prev
pointers anyway. Hence remove the INIT_LIST_HEAD() statement.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: johannes.berg@intel.com
Cc: tj@kernel.org
Link: https://lkml.kernel.org/r/20181207011148.251812-12-bvanassche@acm.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch does not change any functionality but makes the
lockdep_reset_lock() function easier to read.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: johannes.berg@intel.com
Cc: tj@kernel.org
Link: https://lkml.kernel.org/r/20181207011148.251812-11-bvanassche@acm.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since the function __lockdep_init_map() only has one caller, inline it
into its caller. This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: johannes.berg@intel.com
Cc: tj@kernel.org
Link: https://lkml.kernel.org/r/20181207011148.251812-10-bvanassche@acm.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch avoids that sparse complains about a missing declaration for
the lock_classes array when building with CONFIG_DEBUG_LOCKDEP=n.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: johannes.berg@intel.com
Cc: tj@kernel.org
Link: https://lkml.kernel.org/r/20181207011148.251812-9-bvanassche@acm.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
bug.2018.11.12a: Get rid of BUG_ON() and friends
consolidate.2018.12.01a: Continued RCU flavor-consolidation cleanup
doc.2018.11.12a: Documentation updates
fixes.2018.11.12a: Miscellaneous fixes
initrd.2018.11.08b: Automate creation of rcutorture initrd
sil.2018.11.12a: Remove more spin_unlock_wait() calls
Now that synchronize_rcu() waits for preempt-disable regions of code
as well as RCU read-side critical sections, synchronize_sched() can be
replaced by synchronize_rcu(). This commit therefore makes this change.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
lockdep_assert_held() is better suited to checking locking requirements,
since it only checks if the current thread holds the lock regardless of
whether someone else does. This is also a step towards possibly removing
spin_is_locked().
Signed-off-by: Lance Roy <ldr709@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.
The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>
@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>
[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull locking and misc x86 updates from Ingo Molnar:
"Lots of changes in this cycle - in part because locking/core attracted
a number of related x86 low level work which was easier to handle in a
single tree:
- Linux Kernel Memory Consistency Model updates (Alan Stern, Paul E.
McKenney, Andrea Parri)
- lockdep scalability improvements and micro-optimizations (Waiman
Long)
- rwsem improvements (Waiman Long)
- spinlock micro-optimization (Matthew Wilcox)
- qspinlocks: Provide a liveness guarantee (more fairness) on x86.
(Peter Zijlstra)
- Add support for relative references in jump tables on arm64, x86
and s390 to optimize jump labels (Ard Biesheuvel, Heiko Carstens)
- Be a lot less permissive on weird (kernel address) uaccess faults
on x86: BUG() when uaccess helpers fault on kernel addresses (Jann
Horn)
- macrofy x86 asm statements to un-confuse the GCC inliner. (Nadav
Amit)
- ... and a handful of other smaller changes as well"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
locking/lockdep: Make global debug_locks* variables read-mostly
locking/lockdep: Fix debug_locks off performance problem
locking/pvqspinlock: Extend node size when pvqspinlock is configured
locking/qspinlock_stat: Count instances of nested lock slowpaths
locking/qspinlock, x86: Provide liveness guarantee
x86/asm: 'Simplify' GEN_*_RMWcc() macros
locking/qspinlock: Rework some comments
locking/qspinlock: Re-order code
locking/lockdep: Remove duplicated 'lock_class_ops' percpu array
x86/defconfig: Enable CONFIG_USB_XHCI_HCD=y
futex: Replace spin_is_locked() with lockdep
locking/lockdep: Make class->ops a percpu counter and move it under CONFIG_DEBUG_LOCKDEP=y
x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs
x86/cpufeature: Macrofy inline assembly code to work around GCC inlining bugs
x86/extable: Macrofy inline assembly code to work around GCC inlining bugs
x86/paravirt: Work around GCC inlining bugs when compiling paravirt ops
x86/bug: Macrofy the BUG table section handling, to work around GCC inlining bugs
x86/alternatives: Macrofy lock prefixes to work around GCC inlining bugs
x86/refcount: Work around GCC inlining bug
x86/objtool: Use asm macros to work around GCC inlining bugs
...
It was found that when debug_locks was turned off because of a problem
found by the lockdep code, the system performance could drop quite
significantly when the lock_stat code was also configured into the
kernel. For instance, parallel kernel build time on a 4-socket x86-64
server nearly doubled.
Further analysis into the cause of the slowdown traced back to the
frequent call to debug_locks_off() from the __lock_acquired() function
probably due to some inconsistent lockdep states with debug_locks
off. The debug_locks_off() function did an unconditional atomic xchg
to write a 0 value into debug_locks which had already been set to 0.
This led to severe cacheline contention in the cacheline that held
debug_locks. As debug_locks is being referenced in quite a few different
places in the kernel, this greatly slow down the system performance.
To prevent that trashing of debug_locks cacheline, lock_acquired()
and lock_contended() now checks the state of debug_locks before
proceeding. The debug_locks_off() function is also modified to check
debug_locks before calling __debug_locks_off().
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1539913518-15598-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The qspinlock code supports up to 4 levels of slowpath nesting using
four per-CPU mcs_spinlock structures. For 64-bit architectures, they
fit nicely in one 64-byte cacheline.
For para-virtualized (PV) qspinlocks it needs to store more information
in the per-CPU node structure than there is space for. It uses a trick
to use a second cacheline to hold the extra information that it needs.
So PV qspinlock needs to access two extra cachelines for its information
whereas the native qspinlock code only needs one extra cacheline.
Freshly added counter profiling of the qspinlock code, however, revealed
that it was very rare to use more than two levels of slowpath nesting.
So it doesn't make sense to penalize PV qspinlock code in order to have
four mcs_spinlock structures in the same cacheline to optimize for a case
in the native qspinlock code that rarely happens.
Extend the per-CPU node structure to have two more long words when PV
qspinlock locks are configured to hold the extra data that it needs.
As a result, the PV qspinlock code will enjoy the same benefit of using
just one extra cacheline like the native counterpart, for most cases.
[ mingo: Minor changelog edits. ]
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1539697507-28084-2-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Queued spinlock supports up to 4 levels of lock slowpath nesting -
user context, soft IRQ, hard IRQ and NMI. However, we are not sure how
often the nesting happens.
So add 3 more per-CPU stat counters to track the number of instances where
nesting index goes to 1, 2 and 3 respectively.
On a dual-socket 64-core 128-thread Zen server, the following were the
new stat counter values under different circumstances:
State slowpath index1 index2 index3
----- -------- ------ ------ -------
After bootup 1,012,150 82 0 0
After parallel build + perf-top 125,195,009 82 0 0
So the chance of having more than 2 levels of nesting is extremely low.
[ mingo: Minor changelog edits. ]
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1539697507-28084-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On x86 we cannot do fetch_or() with a single instruction and thus end up
using a cmpxchg loop, this reduces determinism. Replace the fetch_or()
with a composite operation: tas-pending + load.
Using two instructions of course opens a window we previously did not
have. Consider the scenario:
CPU0 CPU1 CPU2
1) lock
trylock -> (0,0,1)
2) lock
trylock /* fail */
3) unlock -> (0,0,0)
4) lock
trylock -> (0,0,1)
5) tas-pending -> (0,1,1)
load-val <- (0,1,0) from 3
6) clear-pending-set-locked -> (0,0,1)
FAIL: _2_ owners
where 5) is our new composite operation. When we consider each part of
the qspinlock state as a separate variable (as we can when
_Q_PENDING_BITS == 8) then the above is entirely possible, because
tas-pending will only RmW the pending byte, so the later load is able
to observe prior tail and lock state (but not earlier than its own
trylock, which operates on the whole word, due to coherence).
To avoid this we need 2 things:
- the load must come after the tas-pending (obviously, otherwise it
can trivially observe prior state).
- the tas-pending must be a full word RmW instruction, it cannot be an XCHGB for
example, such that we cannot observe other state prior to setting
pending.
On x86 we can realize this by using "LOCK BTS m32, r32" for
tas-pending followed by a regular load.
Note that observing later state is not a problem:
- if we fail to observe a later unlock, we'll simply spin-wait for
that store to become visible.
- if we observe a later xchg_tail(), there is no difference from that
xchg_tail() having taken place before the tas-pending.
Suggested-by: Will Deacon <will.deacon@arm.com>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: andrea.parri@amarulasolutions.com
Cc: longman@redhat.com
Fixes: 59fb586b4a ("locking/qspinlock: Remove unbounded cmpxchg() loop from locking slowpath")
Link: https://lkml.kernel.org/r/20181003130957.183726335@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While working my way through the code again; I felt the comments could
use help.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: andrea.parri@amarulasolutions.com
Cc: longman@redhat.com
Link: https://lkml.kernel.org/r/20181003130257.156322446@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Flip the branch condition after atomic_fetch_or_acquire(_Q_PENDING_VAL)
such that we loose the indent. This also result in a more natural code
flow IMO.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: andrea.parri@amarulasolutions.com
Cc: longman@redhat.com
Link: https://lkml.kernel.org/r/20181003130257.156322446@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Remove the duplicated 'lock_class_ops' percpu array that is not used
anywhere.
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: 8ca2b56cd7 ("locking/lockdep: Make class->ops a percpu counter and move it under CONFIG_DEBUG_LOCKDEP=y")
Link: http://lkml.kernel.org/r/1539380547-16726-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A sizable portion of the CPU cycles spent on the __lock_acquire() is used
up by the atomic increment of the class->ops stat counter. By taking it out
from the lock_class structure and changing it to a per-cpu per-lock-class
counter, we can reduce the amount of cacheline contention on the class
structure when multiple CPUs are trying to acquire locks of the same
class simultaneously.
To limit the increase in memory consumption because of the percpu nature
of that counter, it is now put back under the CONFIG_DEBUG_LOCKDEP
config option. So the memory consumption increase will only occur if
CONFIG_DEBUG_LOCKDEP is defined. The lock_class structure, however,
is reduced in size by 16 bytes on 64-bit archs after ops removal and
a minor restructuring of the fields.
This patch also fixes a bug in the increment code as the counter is of
the 'unsigned long' type, but atomic_inc() was used to increment it.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/d66681f3-8781-9793-1dcf-2436a284550b@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If CONFIG_WW_MUTEX_SELFTEST=y is enabled, booting an image
in an arm64 virtual machine results in the following
traceback if 8 CPUs are enabled:
DEBUG_LOCKS_WARN_ON(__owner_task(owner) != current)
WARNING: CPU: 2 PID: 537 at kernel/locking/mutex.c:1033 __mutex_unlock_slowpath+0x1a8/0x2e0
...
Call trace:
__mutex_unlock_slowpath()
ww_mutex_unlock()
test_cycle_work()
process_one_work()
worker_thread()
kthread()
ret_from_fork()
If requesting b_mutex fails with -EDEADLK, the error variable
is reassigned to the return value from calling ww_mutex_lock
on a_mutex again. If this call fails, a_mutex is not locked.
It is, however, unconditionally unlocked subsequently, causing
the reported warning. Fix the problem by using two error variables.
With this change, the selftest still fails as follows:
cyclic deadlock not resolved, ret[7/8] = -35
However, the traceback is gone.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: d1b42b800e ("locking/ww_mutex: Add kselftests for resolving ww_mutex cyclic deadlocks")
Link: http://lkml.kernel.org/r/1538516929-9734-1-git-send-email-linux@roeck-us.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When __lock_release() is called, the most likely unlock scenario is
on the innermost lock in the chain. In this case, we can skip some of
the checks and provide a faster path to completion.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1538511560-10090-4-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The static __lock_acquire() function has only two callers:
1) lock_acquire()
2) reacquire_held_locks()
In lock_acquire(), raw_local_irq_save() is called beforehand. So
IRQs must have been disabled. So the check:
DEBUG_LOCKS_WARN_ON(!irqs_disabled())
is kind of redundant in this case. So move the above check
to reacquire_held_locks() to eliminate redundant code in the
lock_acquire() path.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1538511560-10090-3-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The inline function add_chain_cache_classes() is defined, but has no
caller. Just remove it.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1538511560-10090-2-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merging v4.14.68 into v4.14-rt I tripped over a conflict in the
rtmutex.c code. There I found that we had:
#ifdef CONFIG_DEBUG_LOCK_ALLOC
[..]
#endif
#ifndef CONFIG_DEBUG_LOCK_ALLOC
[..]
#endif
Really this should be:
#ifdef CONFIG_DEBUG_LOCK_ALLOC
[..]
#else
[..]
#endif
This cleans up that logic.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Rosin <peda@axentia.se>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180910214638.55926030@vmware.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Trivial fix to spelling mistake in pr_err() error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/20180824112235.8842-1-colin.king@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
c3bc8fd637 ("tracing: Centralize preemptirq tracepoints and unify their usage")
added the inclusion of <trace/events/preemptirq.h>.
liblockdep doesn't have a stub version of that header so now fails to build.
However, commit:
bff1b208a5 ("tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"")
removed the use of functions declared in that header. So delete the #include.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <alexander.levin@verizon.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: bff1b208a5 ("tracing: Partial revert of "tracing: Centralize ...")
Fixes: c3bc8fd637 ("tracing: Centralize preemptirq tracepoints ...")
Link: http://lkml.kernel.org/r/20180828203315.GD18030@decadent.org.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, when a reader acquires a lock, it only sets the
RWSEM_READER_OWNED bit in the owner field. The other bits are simply
not used. When debugging hanging cases involving rwsems and readers,
the owner value does not provide much useful information at all.
This patch modifies the current behavior to always store the task_struct
pointer of the last rwsem-acquiring reader in a reader-owned rwsem. This
may be useful in debugging rwsem hanging cases especially if only one
reader is involved. However, the task in the owner field may not the
real owner or one of the real owners at all when the owner value is
examined, for example, in a crash dump. So it is just an additional
hint about the past history.
If CONFIG_DEBUG_RWSEMS=y is enabled, the owner field will be checked at
unlock time too to make sure the task pointer value is valid. That does
have a slight performance cost and so is only enabled as part of that
debug option.
From the performance point of view, it is expected that the changes
shouldn't have any noticeable performance impact. A rwsem microbenchmark
(with 48 worker threads and 1:1 reader/writer ratio) was ran on a
2-socket 24-core 48-thread Haswell system. The locking rates on a
4.19-rc1 based kernel were as follows:
1) Unpatched kernel: 543.3 kops/s
2) Patched kernel: 549.2 kops/s
3) Patched kernel (CONFIG_DEBUG_RWSEMS on): 546.6 kops/s
There was actually a slight increase in performance (1.1%) in this
particular case. Maybe it was caused by the elimination of a branch or
just a testing noise. Turning on the CONFIG_DEBUG_RWSEMS option also
had less than the expected impact on performance.
The least significant 2 bits of the owner value are now used to designate
the rwsem is readers owned and the owners are anonymous.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1536265114-10842-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It was discovered that a constant stream of readers with occassional
writers pounding on a rwsem may cause many of the readers to enter the
slowpath unnecessarily thus increasing latency and lowering performance.
In the current code, a reader entering the slowpath critical section
will unconditionally set the WAITING_BIAS, if not set yet, and clear
its active count even if no one is in the wait queue and no writer
is present. This causes some incoming readers to observe the presence
of waiters in the wait queue and hence have to go into the slowpath
themselves.
With sufficient numbers of readers and a relatively short lock hold time,
the WAITING_BIAS may be repeatedly turned on and off and a substantial
portion of the readers will go into the slowpath sustaining a rather
long queue in the wait queue spinlock and repeated WAITING_BIAS on/off
cycle until the logjam is broken opportunistically.
To avoid this situation from happening, an additional check is added to
detect the special case that the reader in the critical section is the
only one in the wait queue and no writer is present. When that happens,
it can just exit the slowpath and return immediately as its active count
has already been set in the lock. Other incoming readers won't observe
the presence of waiters and so will not be forced into the slowpath.
The issue was found in a customer site where they had an application
that pounded on the pread64 syscalls heavily on an XFS filesystem. The
application was run in a recent 4-socket boxes with a lot of CPUs. They
saw significant spinlock contention in the rwsem_down_read_failed() call.
With this patch applied, the system CPU usage went down from 85% to 57%,
and the spinlock contention in the pread64 syscalls was gone.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1532459425-19204-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following commit:
08295b3b5b ("Implement an algorithm choice for Wound-Wait mutexes")
introduced a reference in the documentation to a function that was
removed in an earlier commit.
It also forgot to remove a call to debug_mutex_add_waiter() which is now
unconditionally called by __mutex_add_waiter().
Fix those bugs.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dri-devel@lists.freedesktop.org
Fixes: 08295b3b5b ("Implement an algorithm choice for Wound-Wait mutexes")
Link: http://lkml.kernel.org/r/20180903140708.2401-1-thellstrom@vmware.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of
a lot of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockde and the latency tracers
just get called directly (without using the trace events).
But because the original change cleaned up the code very nicely
we kept that, as well as the trace events for preempt and irqs
disabling, but they are limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not
allow them to be called in NMI context. Waiting till Paul makes
an NMI safe SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested
before the merge window opened.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW3ruhRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiM7AP47NhYdSnCFCRUJfrt6PovXmQtuCHt3
c3QMoGGdvzh9YAEAqcSXwh7uLhpHUp1LjMAPkXdZVwNddf4zJQ1zyxQ+EAU=
=vgEr
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of a lot
of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockdep and the latency tracers just
get called directly (without using the trace events). But because the
original change cleaned up the code very nicely we kept that, as well
as the trace events for preempt and irqs disabling, but they are
limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not allow
them to be called in NMI context. Waiting till Paul makes an NMI safe
SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested before
the merge window opened.
* tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
tracing: Fix SPDX format headers to use C++ style comments
tracing: Add SPDX License format tags to tracing files
tracing: Add SPDX License format to bpf_trace.c
blktrace: Add SPDX License format header
s390/ftrace: Add -mfentry and -mnop-mcount support
tracing: Add -mcount-nop option support
tracing: Avoid calling cc-option -mrecord-mcount for every Makefile
tracing: Handle CC_FLAGS_FTRACE more accurately
Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
Uprobes: Simplify uprobe_register() body
tracepoints: Free early tracepoints after RCU is initialized
uprobes: Use synchronize_rcu() not synchronize_sched()
tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister()
ftrace: Remove unused pointer ftrace_swapper_pid
tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing/irqsoff: Handle preempt_count for different configs
tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing: irqsoff: Account for additional preempt_disable
trace: Use rcu_dereference_raw for hooks from trace-event subsystem
tracing/kprobes: Fix within_notrace_func() to check only notrace functions
...
-----BEGIN PGP SIGNATURE-----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=g9rD
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 4.19.
Rob has some new hardware support for new qualcomm hw that I'll send
along separately. This has the display part of it, the remaining pull
is for the acceleration engine.
This also contains a wound-wait/wait-die mutex rework, Peter has acked
it for merging via my tree.
Otherwise mostly the usual level of activity. Summary:
core:
- Wound-wait/wait-die mutex rework
- Add writeback connector type
- Add "content type" property for HDMI
- Move GEM bo to drm_framebuffer
- Initial gpu scheduler documentation
- GPU scheduler fixes for dying processes
- Console deferred fbcon takeover support
- Displayport support for CEC tunneling over AUX
panel:
- otm8009a panel driver fixes
- Innolux TV123WAM and G070Y2-L01 panel driver
- Ilitek ILI9881c panel driver
- Rocktech RK070ER9427 LCD
- EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6
- DLC DLC0700YZG-1
- BOE HV070WSA-100
- newhaven, nhd-4.3-480272ef-atxl LCD
- DataImage SCF0700C48GGU18
- Sharp LQ035Q7DB03
- p079zca: Refactor to support multiple panels
tinydrm:
- ILI9341 display panel
New driver:
- vkms - virtual kms driver to testing.
i915:
- Icelake:
Display enablement
DSI support
IRQ support
Powerwell support
- GPU reset fixes and improvements
- Full ppgtt support refactoring
- PSR fixes and improvements
- Execlist improvments
- GuC related fixes
amdgpu:
- Initial amdgpu documentation
- JPEG engine support on VCN
- CIK uses powerplay by default
- Move to using core PCIE functionality for gens/lanes
- DC/Powerplay interface rework
- Stutter mode support for RV
- Vega12 Powerplay updates
- GFXOFF fixes
- GPUVM fault debugging
- Vega12 GFXOFF
- DC improvements
- DC i2c/aux changes
- UVD 7.2 fixes
- Powerplay fixes for Polaris12, CZ/ST
- command submission bo_list fixes
amdkfd:
- Raven support
- Power management fixes
udl:
- Cleanups and fixes
nouveau:
- misc fixes and cleanups.
msm:
- DPU1 support display controller in sdm845
- GPU coredump support.
vmwgfx:
- Atomic modesetting validation fixes
- Support for multisample surfaces
armada:
- Atomic modesetting support completed.
exynos:
- IPPv2 fixes
- Move g2d to component framework
- Suspend/resume support cleanups
- Driver cleanups
imx:
- CSI configuration improvements
- Driver cleanups
- Use atomic suspend/resume helpers
- ipu-v3 V4L2 XRGB32/XBGR32 support
pl111:
- Add Nomadik LCDC variant
v3d:
- GPU scheduler jobs management
sun4i:
- R40 display engine support
- TCON TOP driver
mediatek:
- MT2712 SoC support
rockchip:
- vop fixes
omapdrm:
- Workaround for DRA7 errata i932
- Fix mm_list locking
mali-dp:
- Writeback implementation
PM improvements
- Internal error reporting debugfs
tilcdc:
- Single fix for deferred probing
hdlcd:
- Teardown fixes
tda998x:
- Converted to a bridge driver.
etnaviv:
- Misc fixes"
* tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits)
drm/amdgpu/sriov: give 8s for recover vram under RUNTIME
drm/scheduler: fix param documentation
drm/i2c: tda998x: correct PLL divider calculation
drm/i2c: tda998x: get rid of private fill_modes function
drm/i2c: tda998x: move mode_valid() to bridge
drm/i2c: tda998x: register bridge outside of component helper
drm/i2c: tda998x: cleanup from previous changes
drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create()
drm/i2c: tda998x: convert to bridge driver
drm/scheduler: fix timeout worker setup for out of order job completions
drm/amd/display: display connected to dp-1 does not light up
drm/amd/display: update clk for various HDMI color depths
drm/amd/display: program display clock on cache match
drm/amd/display: Add NULL check for enabling dp ss
drm/amd/display: add vbios table check for enabling dp ss
drm/amd/display: Don't share clk source between DP and HDMI
drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo
drm/amd/display: Use calculated disp_clk_khz value for dce110
drm/amd/display: Implement custom degamma lut on dcn
drm/amd/display: Destroy aux_engines only once
...
Pull RCU updates from Thomas Gleixner:
"A large update to RCU:
Preparatory work for consolidating the RCU flavors:
- Introduce grace-period sequence numbers to the RCU-bh, RCU-preempt,
and RCU-sched flavors, replacing the old ->gpnum and ->completed
pair of fields.
This change allows lockless code to obtain the complete
grace-period state with a single READ_ONCE(), which is needed to
maintain tolerable lock contention during the upcoming
consolidation of the three RCU flavors.
Note that grace-period sequence numbers are already used by
rcu_barrier(), expedited RCU grace periods, and SRCU, and are thus
already heavily used and well-tested. Joel Fernandes contributed a
number of excellent fixes and improvements.
- Clean up some grace-period-reporting loose ends, including
improving the handling of quiescent states from offline CPUs and
fixing some false-positive WARN_ON_ONCE() invocations.
(Strictly speaking, the WARN_ON_ONCE() invocations were quite
correct, but their invariants were (harmlessly) violated by the
earlier sloppy handling of quiescent states from offline CPUs.)
In addition, improve grace-period forward-progress guarantees so as
to allow removal of fail-safe checks that required otherwise
needless lock acquisitions. Finally, add more diagnostics to help
debug the upcoming consolidation of the RCU-bh, RCU-preempt, and
RCU-sched flavors.
The rest:
- SRCU updates
- Updates to rcutorture and associated scripting.
- The usual pile of miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (118 commits)
rcutorture: Fix rcu_barrier successes counter
rcutorture: Add support to detect if boost kthread prio is too low
rcutorture: Use monotonic timestamp for stall detection
rcutorture: Make boost test more robust
rcutorture: Disable RT throttling for boost tests
rcutorture: Emphasize testing of single reader protection type
rcutorture: Handle extended read-side critical sections
rcutorture: Make rcu_torture_timer() use rcu_torture_one_read()
rcutorture: Use per-CPU random state for rcu_torture_timer()
rcutorture: Use atomic increment for n_rcu_torture_timers
rcutorture: Extract common code from rcu_torture_reader()
rcuperf: Remove unused torturing_tasks() function
rcu: Remove rcutorture test version and sequence number
rcutorture: Change units of onoff_interval to jiffies
rcu: Assign higher prio to RCU threads if rcutorture is built-in
rculist: Improve documentation for list_for_each_entry_from_rcu()
srcu: Add grace-period number to rcutorture statistics printout
rcu: Print stall-warning NMI dyntick state in hexadecimal
MAINTAINERS: Update RCU, SRCU, and TORTURE-TEST entries
rcu: Make rcu_seq_diff() more exact
...
Joel Fernandes created a nice patch that cleaned up the duplicate hooks used
by lockdep and irqsoff latency tracer. It made both use tracepoints. But it
caused lockdep to trigger several false positives. We have not figured out
why yet, but removing lockdep from using the trace event hooks and just call
its helper functions directly (like it use to), makes the problem go away.
This is a partial revert of the clean up patch c3bc8fd637 ("tracing:
Centralize preemptirq tracepoints and unify their usage") that adds direct
calls for lockdep, but also keeps most of the clean up done to get rid of
the horrible preprocessor if statements.
Link: http://lkml.kernel.org/r/20180806155058.5ee875f4@gandalf.local.home
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Fixes: c3bc8fd637 ("tracing: Centralize preemptirq tracepoints and unify their usage")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This patch detaches the preemptirq tracepoints from the tracers and
keeps it separate.
Advantages:
* Lockdep and irqsoff event can now run in parallel since they no longer
have their own calls.
* This unifies the usecase of adding hooks to an irqsoff and irqson
event, and a preemptoff and preempton event.
3 users of the events exist:
- Lockdep
- irqsoff and preemptoff tracers
- irqs and preempt trace events
The unification cleans up several ifdefs and makes the code in preempt
tracer and irqsoff tracers simpler. It gets rid of all the horrific
ifdeferry around PROVE_LOCKING and makes configuration of the different
users of the tracepoints more easy and understandable. It also gets rid
of the time_* function calls from the lockdep hooks used to call into
the preemptirq tracer which is not needed anymore. The negative delta in
lines of code in this patch is quite large too.
In the patch we introduce a new CONFIG option PREEMPTIRQ_TRACEPOINTS
as a single point for registering probes onto the tracepoints. With
this,
the web of config options for preempt/irq toggle tracepoints and its
users becomes:
PREEMPT_TRACER PREEMPTIRQ_EVENTS IRQSOFF_TRACER PROVE_LOCKING
| | \ | |
\ (selects) / \ \ (selects) /
TRACE_PREEMPT_TOGGLE ----> TRACE_IRQFLAGS
\ /
\ (depends on) /
PREEMPTIRQ_TRACEPOINTS
Other than the performance tests mentioned in the previous patch, I also
ran the locking API test suite. I verified that all tests cases are
passing.
I also injected issues by not registering lockdep probes onto the
tracepoints and I see failures to confirm that the probes are indeed
working.
This series + lockdep probes not registered (just to inject errors):
[ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/12:FAILED|FAILED| ok |
[ 0.000000] sirq-safe-A => hirqs-on/21:FAILED|FAILED| ok |
[ 0.000000] hard-safe-A + irqs-on/12:FAILED|FAILED| ok |
[ 0.000000] soft-safe-A + irqs-on/12:FAILED|FAILED| ok |
[ 0.000000] hard-safe-A + irqs-on/21:FAILED|FAILED| ok |
[ 0.000000] soft-safe-A + irqs-on/21:FAILED|FAILED| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
With this series + lockdep probes registered, all locking tests pass:
[ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
Link: http://lkml.kernel.org/r/20180730222423.196630-4-joel@joelfernandes.org
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
get_cpu_var disables preemption which has the potential to call into the
preemption disable trace points causing some complications. There's also
no need to disable preemption in uses of get_lock_stats anyway since
preempt is already disabled. So lets simplify the code.
Link: http://lkml.kernel.org/r/20180730222423.196630-2-joel@joelfernandes.org
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull RCU updates from Paul E. McKenney:
- An optimization and a fix for RCU expedited grace periods, with
the fix being from Boqun Feng.
- Miscellaneous fixes, including a lockdep-annotation fix from
Boqun Feng.
- SRCU updates.
- Updates to rcutorture and associated scripting.
- Introduce grace-period sequence numbers to the RCU-bh, RCU-preempt,
and RCU-sched flavors, replacing the old ->gpnum and ->completed
pair of fields. This change allows lockless code to obtain the
complete grace-period state with a single READ_ONCE(), which is
needed to maintain tolerable lock contention during the upcoming
consolidation of the three RCU flavors. Note that grace-period
sequence numbers are already used by rcu_barrier(), expedited
RCU grace periods, and SRCU, and are thus already heavily used
and well-tested. Joel Fernandes contributed a number of excellent
fixes and improvements.
- Clean up some grace-period-reporting loose ends, including
improving the handling of quiescent states from offline CPUs
and fixing some false-positive WARN_ON_ONCE() invocations.
(Strictly speaking, the WARN_ON_ONCE() invocations were quite
correct, but their invariants were (harmlessly) violated by the
earlier sloppy handling of quiescent states from offline CPUs.)
In addition, improve grace-period forward-progress guarantees so
as to allow removal of fail-safe checks that required otherwise
needless lock acquisitions. Finally, add more diagnostics to
help debug the upcoming consolidation of the RCU-bh, RCU-preempt,
and RCU-sched flavors.
- Additional miscellaneous fixes, including those contributed by
Byungchul Park, Mauro Carvalho Chehab, Joe Perches, Joel Fernandes,
Steven Rostedt, Andrea Parri, and Neil Brown.
- Additional torture-test changes, including several contributed by
Arnd Bergmann and Joel Fernandes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A patchset worked out together with Peter Zijlstra. Ingo is OK with taking
it through the DRM tree:
This is a small fallout from a work to allow batching WW mutex locks and
unlocks.
Our Wound-Wait mutexes actually don't use the Wound-Wait algorithm but
the Wait-Die algorithm. One could perhaps rename those mutexes tree-wide to
"Wait-Die mutexes" or "Deadlock Avoidance mutexes". Another approach suggested
here is to implement also the "Wound-Wait" algorithm as a per-WW-class
choice, as it has advantages in some cases. See for example
http://www.mathcs.emory.edu/~cheung/Courses/554/Syllabus/8-recv+serial/deadlock-compare.html
Now Wound-Wait is a preemptive algorithm, and the preemption is implemented
using a lazy scheme: If a wounded transaction is about to go to sleep on
a contended WW mutex, we return -EDEADLK. That is sufficient for deadlock
prevention. Since with WW mutexes we also require the aborted transaction to
sleep waiting to lock the WW mutex it was aborted on, this choice also provides
a suitable WW mutex to sleep on. If we were to return -EDEADLK on the first
WW mutex lock after the transaction was wounded whether the WW mutex was
contended or not, the transaction might frequently be restarted without a wait,
which is far from optimal. Note also that with the lazy preemption scheme,
contrary to Wait-Die there will be no rollbacks on lock contention of locks
held by a transaction that has completed its locking sequence.
The modeset locks are then changed from Wait-Die to Wound-Wait since the
typical locking pattern of those locks very well matches the criterion for
a substantial reduction in the number of rollbacks. For reservation objects,
the benefit is more unclear at this point and they remain using Wait-Die.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703105339.4461-1-thellstrom@vmware.com
The current Wound-Wait mutex algorithm is actually not Wound-Wait but
Wait-Die. Implement also Wound-Wait as a per-ww-class choice. Wound-Wait
is, contrary to Wait-Die a preemptive algorithm and is known to generate
fewer backoffs. Testing reveals that this is true if the
number of simultaneous contending transactions is small.
As the number of simultaneous contending threads increases, Wait-Wound
becomes inferior to Wait-Die in terms of elapsed time.
Possibly due to the larger number of held locks of sleeping transactions.
Update documentation and callers.
Timings using git://people.freedesktop.org/~thomash/ww_mutex_test
tag patch-18-06-15
Each thread runs 100000 batches of lock / unlock 800 ww mutexes randomly
chosen out of 100000. Four core Intel x86_64:
Algorithm #threads Rollbacks time
Wound-Wait 4 ~100 ~17s.
Wait-Die 4 ~150000 ~19s.
Wound-Wait 16 ~360000 ~109s.
Wait-Die 16 ~450000 ~82s.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Co-authored-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Make the WW mutex code more readable by adding comments, splitting up
functions and pointing out that we're actually using the Wait-Die
algorithm.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Co-authored-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
This commit adds "#define pr_fmt(fmt) fmt" to the torture-test files
in order to keep the current dmesg format. Once Joe's commits have
hit mainline, these definitions will be changed in order to automatically
generate the dmesg line prefix that the scripts expect. This will have
the beneficial side-effect of allowing printk() formats to be used more
widely and of shortening some pr_*() lines.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Joe Perches <joe@perches.com>
Some bugs reproduce quickly only at high CPU-hotplug rates, so the
rcutorture TREE03 scenario now has only 200 milliseconds spacing between
CPU-hotplug operations. At this rate, the torture-test pair of console
messages per operation becomes a bit voluminous. This commit therefore
converts the torture-test set of "verbose" kernel-boot arguments from
bool to int, and prints the extra console messages only when verbose=2.
The default is still verbose=1.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Pull locking fixes from Thomas Gleixner:
"A set of fixes and updates for the locking code:
- Prevent lockdep from updating irq state within its own code and
thereby confusing itself.
- Buid fix for older GCCs which mistreat anonymous unions
- Add a missing lockdep annotation in down_read_non_onwer() which
causes up_read_non_owner() to emit a lockdep splat
- Remove the custom alpha dec_and_lock() implementation which is
incorrect in terms of ordering and use the generic one.
The remaining two commits are not strictly fixes. They provide irqsave
variants of atomic_dec_and_lock() and refcount_dec_and_lock(). These
are required to merge the relevant updates and cleanups into different
maintainer trees for 4.19, so routing them into mainline without
actual users is the sanest approach.
They should have been in -rc1, but last weekend I took the liberty to
just avoid computers in order to regain some mental sanity"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/qspinlock: Fix build for anonymous union in older GCC compilers
locking/lockdep: Do not record IRQ state within lockdep code
locking/rwsem: Fix up_read_non_owner() warning with DEBUG_RWSEMS
locking/refcounts: Implement refcount_dec_and_lock_irqsave()
atomic: Add irqsave variant of atomic_dec_and_lock()
alpha: Remove custom dec_and_lock() implementation
While debugging where things were going wrong with mapping
enabling/disabling interrupts with the lockdep state and actual real
enabling and disabling interrupts, I had to silent the IRQ
disabling/enabling in debug_check_no_locks_freed() because it was
always showing up as it was called before the splat was.
Use raw_local_irq_save/restore() for not only debug_check_no_locks_freed()
but for all internal lockdep functions, as they hide useful information
about where interrupts were used incorrectly last.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/lkml/20180404140630.3f4f4c7a@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It was found that the use of up_read_non_owner() in NFS was causing
the following warning when DEBUG_RWSEMS was configured.
DEBUG_LOCKS_WARN_ON(sem->owner != ((struct task_struct *)(1UL << 0)))
Looking into the rwsem.c file, it was discovered that the corresponding
down_read_non_owner() function was not setting the owner field properly.
This is fixed now, and the warning should be gone.
Fixes: 5149cbac42 ("locking/rwsem: Add DEBUG_RWSEMS to look for lock/unlock mismatches")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Gavin Schenk <g.schenk@eckelmann.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-nfs@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1527168398-4291-1-git-send-email-longman@redhat.com
