We use OUTPUT directory as TMPOUT for checking no-pie option.
Since commit f2f02ebd8f ("kbuild: improve cc-option to clean up all
temporary files") when building powerpc/ from selftests directory, the
OUTPUT directory points to powerpc/pmu/ebb/ and gets removed when
checking for -no-pie option in try-run routine, subsequently build
fails with the following:
$ make -C powerpc
...
TARGET=ebb; BUILD_TARGET=$OUTPUT/$TARGET; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C $TARGET all
make[2]: Entering directory '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb'
make[2]: *** No rule to make target 'Makefile'.
make[2]: Failed to remake makefile 'Makefile'.
make[2]: *** No rule to make target 'ebb.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'ebb_handler.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'trace.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'busy_loop.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: Target 'all' not remade because of errors.
Fix this by adding a suffix to the OUTPUT directory so that the
failure is avoided.
Fixes: 9686813f6e ("selftests/powerpc: Fix try-run when source tree is not writable")
Signed-off-by: Harish <harish@linux.ibm.com>
[mpe: Mention that commit that triggered the breakage]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200625165721.264904-1-harish@linux.ibm.com
Pull networking fixes from David Miller:
1) Don't insert ESP trailer twice in IPSEC code, from Huy Nguyen.
2) The default crypto algorithm selection in Kconfig for IPSEC is out
of touch with modern reality, fix this up. From Eric Biggers.
3) bpftool is missing an entry for BPF_MAP_TYPE_RINGBUF, from Andrii
Nakryiko.
4) Missing init of ->frame_sz in xdp_convert_zc_to_xdp_frame(), from
Hangbin Liu.
5) Adjust packet alignment handling in ax88179_178a driver to match
what the hardware actually does. From Jeremy Kerr.
6) register_netdevice can leak in the case one of the notifiers fail,
from Yang Yingliang.
7) Use after free in ip_tunnel_lookup(), from Taehee Yoo.
8) VLAN checks in sja1105 DSA driver need adjustments, from Vladimir
Oltean.
9) tg3 driver can sleep forever when we get enough EEH errors, fix from
David Christensen.
10) Missing {READ,WRITE}_ONCE() annotations in various Intel ethernet
drivers, from Ciara Loftus.
11) Fix scanning loop break condition in of_mdiobus_register(), from
Florian Fainelli.
12) MTU limit is incorrect in ibmveth driver, from Thomas Falcon.
13) Endianness fix in mlxsw, from Ido Schimmel.
14) Use after free in smsc95xx usbnet driver, from Tuomas Tynkkynen.
15) Missing bridge mrp configuration validation, from Horatiu Vultur.
16) Fix circular netns references in wireguard, from Jason A. Donenfeld.
17) PTP initialization on recovery is not done properly in qed driver,
from Alexander Lobakin.
18) Endian conversion of L4 ports in filters of cxgb4 driver is wrong,
from Rahul Lakkireddy.
19) Don't clear bound device TX queue of socket prematurely otherwise we
get problems with ktls hw offloading, from Tariq Toukan.
20) ipset can do atomics on unaligned memory, fix from Russell King.
21) Align ethernet addresses properly in bridging code, from Thomas
Martitz.
22) Don't advertise ipv4 addresses on SCTP sockets having ipv6only set,
from Marcelo Ricardo Leitner.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (149 commits)
rds: transport module should be auto loaded when transport is set
sch_cake: fix a few style nits
sch_cake: don't call diffserv parsing code when it is not needed
sch_cake: don't try to reallocate or unshare skb unconditionally
ethtool: fix error handling in linkstate_prepare_data()
wil6210: account for napi_gro_receive never returning GRO_DROP
hns: do not cast return value of napi_gro_receive to null
socionext: account for napi_gro_receive never returning GRO_DROP
wireguard: receive: account for napi_gro_receive never returning GRO_DROP
vxlan: fix last fdb index during dump of fdb with nhid
sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket
tc-testing: avoid action cookies with odd length.
bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
net: dsa: sja1105: fix tc-gate schedule with single element
net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules
net: dsa: sja1105: unconditionally free old gating config
net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top
net: macb: free resources on failure path of at91ether_open()
net: macb: call pm_runtime_put_sync on failure path
...
This enhancement auto loads transport module when the transport
is set via SO_RDS_TRANSPORT socket option.
Reviewed-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com>
Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Toke Høiland-Jørgensen says:
====================
sched: A couple of fixes for sch_cake
This series contains a couple of fixes for diffserv handling in sch_cake that
provide a nice speedup (with a somewhat pedantic nit fix tacked on to the end).
Not quite sure about whether this should go to stable; it does provide a nice
speedup, but it's not strictly a fix in the "correctness" sense. I lean towards
including this in stable as well, since our most important consumer of that
(OpenWrt) is likely to backport the series anyway.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
I spotted a few nits when comparing the in-tree version of sch_cake with
the out-of-tree one: A redundant error variable declaration shadowing an
outer declaration, and an indentation alignment issue. Fix both of these.
Fixes: 046f6fd5da ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a further optimisation of the diffserv parsing codepath, we can skip it
entirely if CAKE is configured to neither use diffserv-based
classification, nor to zero out the diffserv bits.
Fixes: c87b4ecdbe ("sch_cake: Make sure we can write the IP header before changing DSCP bits")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
cake_handle_diffserv() tries to linearize mac and network header parts of
skb and to make it writable unconditionally. In some cases it leads to full
skb reallocation, which reduces throughput and increases CPU load. Some
measurements of IPv4 forward + NAPT on MIPS router with 580 MHz single-core
CPU was conducted. It appears that on kernel 4.9 skb_try_make_writable()
reallocates skb, if skb was allocated in ethernet driver via so-called
'build skb' method from page cache (it was discovered by strange increase
of kmalloc-2048 slab at first).
Obtain DSCP value via read-only skb_header_pointer() call, and leave
linearization only for DSCP bleaching or ECN CE setting. And, as an
additional optimisation, skip diffserv parsing entirely if it is not needed
by the current configuration.
Fixes: c87b4ecdbe ("sch_cake: Make sure we can write the IP header before changing DSCP bits")
Signed-off-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
[ fix a few style issues, reflow commit message ]
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When getting SQI or maximum SQI value fails in linkstate_prepare_data(), we
must not return without calling ethnl_ops_complete(dev) as that could
result in imbalance between ethtool_ops ->begin() and ->complete() calls.
Fixes: 8066021915 ("ethtool: provide UAPI for PHY Signal Quality Index (SQI)")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fixed a ringbuffer bug for nested events having time go backwards
- Fix a config dependency for boot time tracing to depend on synthetic
events instead of histograms.
- Fix trigger format parsing to handle multiple spaces
- Fix bootconfig to handle failures in multiple events
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXvUjBBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmLiAQD47/1T01ilYeXqJ+EG235aeQssvRa7
RSmIAoMP+V6kHQD9G2RjnWkb3BcrdNk9zoi0LpnuMl95m5OuaMzE4PPO+ws=
=Zbx8
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Four small fixes:
- Fix a ringbuffer bug for nested events having time go backwards
- Fix a config dependency for boot time tracing to depend on
synthetic events instead of histograms.
- Fix trigger format parsing to handle multiple spaces
- Fix bootconfig to handle failures in multiple events"
* tag 'trace-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/boottime: Fix kprobe multiple events
tracing: Fix event trigger to accept redundant spaces
tracing/boot: Fix config dependency for synthedic event
ring-buffer: Zero out time extend if it is nested and not absolute
Jason A. Donenfeld says:
====================
napi_gro_receive caller return value cleanups
In 6570bc79c0 ("net: core: use listified Rx for GRO_NORMAL in
napi_gro_receive()"), the GRO_NORMAL case stopped calling
netif_receive_skb_internal, checking its return value, and returning
GRO_DROP in case it failed. Instead, it calls into
netif_receive_skb_list_internal (after a bit of indirection), which
doesn't return any error. Therefore, napi_gro_receive will never return
GRO_DROP, making handling GRO_DROP dead code.
I emailed the author of 6570bc79c0 on netdev [1] to see if this change
was intentional, but the dlink.ru email address has been disconnected,
and looking a bit further myself, it seems somewhat infeasible to start
propagating return values backwards from the internal machinations of
netif_receive_skb_list_internal.
Taking a look at all the callers of napi_gro_receive, it appears that
three are checking the return value for the purpose of comparing it to
the now never-happening GRO_DROP, and one just casts it to (void), a
likely historical leftover. Every other of the 120 callers does not
bother checking the return value.
And it seems like these remaining 116 callers are doing the right thing:
after calling napi_gro_receive, the packet is now in the hands of the
upper layers of the newtworking, and the device driver itself has no
business now making decisions based on what the upper layers choose to
do. Incrementing stats counters on GRO_DROP seems like a mistake, made
by these three drivers, but not by the remaining 117.
It would seem, therefore, that after rectifying these four callers of
napi_gro_receive, that I should go ahead and just remove returning the
value from napi_gro_receive all together. However, napi_gro_receive has
a function event tracer, and being able to introspect into the
networking stack to see how often napi_gro_receive is returning whatever
interesting GRO status (aside from _DROP) remains an interesting
data point worth keeping for debugging.
So, this series simply gets rid of the return value checking for the
four useless places where that check never evaluates to anything
meaningful.
[1] https://lore.kernel.org/netdev/20200624210606.GA1362687@zx2c4.com/
====================
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The napi_gro_receive function no longer returns GRO_DROP ever, making
handling GRO_DROP dead code. This commit removes that dead code.
Further, it's not even clear that device drivers have any business in
taking action after passing off received packets; that's arguably out of
their hands. In this case, too, the non-gro path didn't bother checking
the return value. Plus, this had some clunky debugging functions that
duplicated code from elsewhere and was generally pretty messy. So, this
commit cleans that all up too.
Fixes: 6570bc79c0 ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Basically no drivers care about the return value here, and there's no
__must_check that would make casting to void sensible, so remove it.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The napi_gro_receive function no longer returns GRO_DROP ever, making
handling GRO_DROP dead code. This commit removes that dead code.
Further, it's not even clear that device drivers have any business in
taking action after passing off received packets; that's arguably out of
their hands.
Fixes: 6570bc79c0 ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The napi_gro_receive function no longer returns GRO_DROP ever, making
handling GRO_DROP dead code. This commit removes that dead code.
Further, it's not even clear that device drivers have any business in
taking action after passing off received packets; that's arguably out of
their hands.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Fixes: 6570bc79c0 ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes last saved fdb index in fdb dump handler when
handling fdb's with nhid.
Fixes: 1274e1cc42 ("vxlan: ecmp support for mac fdb entries")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a socket is set ipv6only, it will still send IPv4 addresses in the
INIT and INIT_ACK packets. This potentially misleads the peer into using
them, which then would cause association termination.
The fix is to not add IPv4 addresses to ipv6only sockets.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update odd length cookie hexstrings in csum.json, tunnel_key.json and
bpf.json to be even length to comply with check enforced in commit
0149dabf2a1b ("tc: m_actions: check cookie hexstring len") in iproute2.
Signed-off-by: Briana Oursler <briana.oursler@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell says:
====================
tcp_cubic: fix spurious HYSTART_DELAY on RTT decrease
This series fixes a long-standing bug in the TCP CUBIC
HYSTART_DELAY mechanim recently reported by Mirja Kuehlewind. The
code can cause a spurious exit of slow start in some particular
cases: upon an RTT decrease that happens on the 9th or later ACK
in a round trip. This series fixes the original Hystart code and
also the recent BPF implementation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Apply the fix from:
"tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT"
to the BPF implementation of TCP CUBIC congestion control.
Repeating the commit description here for completeness:
Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where
Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an
ACK when the minimum rtt of a connection goes down. From inspection it
is clear from the existing code that this could happen in an example
like the following:
o The first 8 RTT samples in a round trip are 150ms, resulting in a
curr_rtt of 150ms and a delay_min of 150ms.
o The 9th RTT sample is 100ms. The curr_rtt does not change after the
first 8 samples, so curr_rtt remains 150ms. But delay_min can be
lowered at any time, so delay_min falls to 100ms. The code executes
the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min
of 100ms, and the curr_rtt is declared far enough above delay_min to
force a (spurious) exit of Slow start.
The fix here is simple: allow every RTT sample in a round trip to
lower the curr_rtt.
Fixes: 6de4a9c430 ("bpf: tcp: Add bpf_cubic example")
Reported-by: Mirja Kuehlewind <mirja.kuehlewind@ericsson.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where
Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an
ACK when the minimum rtt of a connection goes down. From inspection it
is clear from the existing code that this could happen in an example
like the following:
o The first 8 RTT samples in a round trip are 150ms, resulting in a
curr_rtt of 150ms and a delay_min of 150ms.
o The 9th RTT sample is 100ms. The curr_rtt does not change after the
first 8 samples, so curr_rtt remains 150ms. But delay_min can be
lowered at any time, so delay_min falls to 100ms. The code executes
the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min
of 100ms, and the curr_rtt is declared far enough above delay_min to
force a (spurious) exit of Slow start.
The fix here is simple: allow every RTT sample in a round trip to
lower the curr_rtt.
Fixes: ae27e98a51 ("[TCP] CUBIC v2.3")
Reported-by: Mirja Kuehlewind <mirja.kuehlewind@ericsson.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
Fixes for SJA1105 DSA tc-gate action
This small series fixes 2 bugs in the tc-gate implementation:
1. The TAS state machine keeps getting rescheduled even after removing
tc-gate actions on all ports.
2. tc-gate actions with only one gate control list entry are installed
to hardware with an incorrect interval of zero, which makes the
switch erroneously drop those packets (since the configuration is
invalid).
To keep the code palatable, a forward-declaration was avoided by moving
some code around in patch 1/4. I hope that isn't too much of an issue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The sja1105_gating_cfg_time_to_interval function does this, as per the
comments:
/* The gate entries contain absolute times in their e->interval field. Convert
* that to proper intervals (i.e. "0, 5, 10, 15" to "5, 5, 5, 5").
*/
To perform that task, it iterates over gating_cfg->entries, at each step
updating the interval of the _previous_ entry. So one interval remains
to be updated at the end of the loop: the last one (since it isn't
"prev" for anyone else).
But there was an erroneous check, that the last element's interval
should not be updated if it's also the only element. I'm not quite sure
why that check was there, but it's clearly incorrect, as a tc-gate
schedule with a single element would get an e->interval of zero,
regardless of the duration requested by the user. The switch wouldn't
even consider this configuration as valid: it will just drop all traffic
that matches the rule.
Fixes: 834f8933d5 ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links")
Reported-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, tas_data->enabled would remain true even after deleting all
tc-gate rules from the switch ports, which would cause the
sja1105_tas_state_machine to get unnecessarily scheduled.
Also, if there were any errors which would prevent the hardware from
enabling the gating schedule, the sja1105_tas_state_machine would
continuously detect and print that, spamming the kernel log, even if the
rules were subsequently deleted.
The rules themselves are _not_ active, because sja1105_init_scheduling
does enough of a job to not install the gating schedule in the static
config. But the virtual link rules themselves are still present.
So call the functions that remove the tc-gate configuration from
priv->tas_data.gating_cfg, so that tas_data->enabled can be set to
false, and sja1105_tas_state_machine will stop from being scheduled.
Fixes: 834f8933d5 ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently sja1105_compose_gating_subschedule is not prepared to be
called for the case where we want to recompute the global tc-gate
configuration after we've deleted those actions on a port.
After deleting the tc-gate actions on the last port, max_cycle_time
would become zero, and that would incorrectly prevent
sja1105_free_gating_config from getting called.
So move the freeing function above the check for the need to apply a new
configuration.
Fixes: 834f8933d5 ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It turns out that sja1105_compose_gating_subschedule must also be called
from sja1105_vl_delete, to recalculate the overall tc-gate
configuration. Currently this is not possible without introducing a
forward declaration. So move the function at the top of the file, along
with its dependencies.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DMA buffers were not freed on failure path of at91ether_open().
Along with changes for freeing the DMA buffers the enable/disable
interrupt instructions were moved to at91ether_start()/at91ether_stop()
functions and the operations on at91ether_stop() were done in
their reverse order (compared with how is done in at91ether_start()):
before this patch the operation order on interface open path
was as follows:
1/ alloc DMA buffers
2/ enable tx, rx
3/ enable interrupts
and the order on interface close path was as follows:
1/ disable tx, rx
2/ disable interrupts
3/ free dma buffers.
Fixes: 7897b071ac ("net: macb: convert to phylink")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Call pm_runtime_put_sync() on failure path of at91ether_open.
Fixes: e6a41c23df ("net: macb: ensure interface is not suspended on at91rm9200")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The port number field in the status register was not correct, so fix it.
Fixes: d6ffb63001 ("i2c: Add FSI-attached I2C master algorithm")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add extern declarations for vDSO time-related functions to notify the
compiler these functions will be used in somewhere to avoid
"no previous prototype" compile warning.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The (struct __prci_data).hw_clks.hws is an array with dynamic elements.
Using struct_size(pd, hw_clks.hws, ARRAY_SIZE(__prci_init_clocks))
instead of sizeof(*pd) to get the correct memory size of
struct __prci_data for sifive/fu540-prci. After applying this
modifications, the kernel runs smoothly with CONFIG_SLAB_FREELIST_RANDOM
enabled on the HiFive unleashed board.
Fixes: 30b8e27e3b ("clk: sifive: add a driver for the SiFive FU540 PRCI IP block")
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The time related vDSO functions use a variable, vdso_data, to access the
vDSO data page to get the system time information. Because the vdso_data
for CFLAGS_vgettimeofday.o is an external variable defined in vdso.o,
the CFLAGS_vgettimeofday.o should be compiled with -fPIC to ensure
that vdso_data is addressable.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAl706ikACgkQnJ2qBz9k
QNkk/Af9E2/VzEy4CNsGWTBdxRCZQ12Q3n1pe+ReqkmQDEWjN4FxTuhukw9dtsxE
a6ZIm9EXOyFmu+LnrSFoskWDBDCrgwo2zOF2kW/pjs9KRW04l0sWuGEI5btKW9/2
Q/uFUJjpgrQ3sxSbj2Df0Q6k0CVBQMTzoJvH2QobViRgzoJeSMr0nE+Sw7PRHzOB
Wh3Fis65B8ZrxBMnTPuwzo3zLrvvqtzW6MGRSK0HxOBR1R9KCWvkJgBdyMy80/tg
bX2VvpUL6FRUmc36B1VJ/d3hon13nQ0GthTvD1FuBYHmVf/z5AU1gtQOIGl5QkWi
Q6PoW+lL8m+gTcN29stz1KHHrvhPbQ==
=nQGb
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fixlet from Jan Kara:
"A performance improvement to reduce impact of fsnotify for inodes
where it isn't used"
* tag 'fsnotify_for_v5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fs: Do not check if there is a fsnotify watcher on pseudo inodes
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net, they are:
1) Unaligned atomic access in ipset, from Russell King.
2) Missing module description, from Rob Gill.
3) Patches to fix a module unload causing NULL pointer dereference in
xtables, from David Wilder. For the record, I posting here his cover
letter explaining the problem:
A crash happened on ppc64le when running ltp network tests triggered by
"rmmod iptable_mangle".
See previous discussion in this thread:
https://lists.openwall.net/netdev/2020/06/03/161 .
In the crash I found in iptable_mangle_hook() that
state->net->ipv4.iptable_mangle=NULL causing a NULL pointer dereference.
net->ipv4.iptable_mangle is set to NULL in +iptable_mangle_net_exit() and
called when ip_mangle modules is unloaded. A rmmod task was found running
in the crash dump. A 2nd crash showed the same problem when running
"rmmod iptable_filter" (net->ipv4.iptable_filter=NULL).
To fix this I added .pre_exit hook in all iptable_foo.c. The pre_exit will
un-register the underlying hook and exit would do the table freeing. The
netns core does an unconditional +synchronize_rcu after the pre_exit hooks
insuring no packets are in flight that have picked up the pointer before
completing the un-register.
These patches include changes for both iptables and ip6tables.
We tested this fix with ltp running iptables01.sh and iptables01.sh -6 a
loop for 72 hours.
4) Add a selftest for conntrack helper assignment, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The eth_addr member is passed to ether_addr functions that require
2-byte alignment, therefore the member must be properly aligned
to avoid unaligned accesses.
The problem is in place since the initial merge of multicast to unicast:
commit 6db6f0eae6 bridge: multicast to unicast
Fixes: 6db6f0eae6 ("bridge: multicast to unicast")
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Thomas Martitz <t.martitz@avm.de>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several regression fixes from work that landed in the merge window,
particularly in the mlx5 driver:
- Various static checker and warning fixes
- General bug fixes in rvt, qedr, hns, mlx5 and hfi1
- Several regression fixes related to the ECE and QP changes in last cycle
- Fixes for a few long standing crashers in CMA, uverbs ioctl, and xrc
-----BEGIN PGP SIGNATURE-----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=Cmfg
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Several regression fixes from work that landed in the merge window,
particularly in the mlx5 driver:
- Various static checker and warning fixes
- General bug fixes in rvt, qedr, hns, mlx5 and hfi1
- Several regression fixes related to the ECE and QP changes in last
cycle
- Fixes for a few long standing crashers in CMA, uverbs ioctl, and
xrc"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (25 commits)
IB/hfi1: Add atomic triggered sleep/wakeup
IB/hfi1: Correct -EBUSY handling in tx code
IB/hfi1: Fix module use count flaw due to leftover module put calls
IB/hfi1: Restore kfree in dummy_netdev cleanup
IB/mad: Fix use after free when destroying MAD agent
RDMA/mlx5: Protect from kernel crash if XRC_TGT doesn't have udata
RDMA/counter: Query a counter before release
RDMA/mad: Fix possible memory leak in ib_mad_post_receive_mads()
RDMA/mlx5: Fix integrity enabled QP creation
RDMA/mlx5: Remove ECE limitation from the RAW_PACKET QPs
RDMA/mlx5: Fix remote gid value in query QP
RDMA/mlx5: Don't access ib_qp fields in internal destroy QP path
RDMA/core: Check that type_attrs is not NULL prior access
RDMA/hns: Fix an cmd queue issue when resetting
RDMA/hns: Fix a calltrace when registering MR from userspace
RDMA/mlx5: Add missed RST2INIT and INIT2INIT steps during ECE handshake
RDMA/cma: Protect bind_list and listen_list while finding matching cm id
RDMA/qedr: Fix KASAN: use-after-free in ucma_event_handler+0x532
RDMA/efa: Set maximum pkeys device attribute
RDMA/rvt: Fix potential memory leak caused by rvt_alloc_rq
...
there is a problem with the CWR flag set in an incoming ACK segment
and it leads to the situation when the ECE flag is latched forever
the following packetdrill script shows what happens:
// Stack receives incoming segments with CE set
+0.1 <[ect0] . 11001:12001(1000) ack 1001 win 65535
+0.0 <[ce] . 12001:13001(1000) ack 1001 win 65535
+0.0 <[ect0] P. 13001:14001(1000) ack 1001 win 65535
// Stack repsonds with ECN ECHO
+0.0 >[noecn] . 1001:1001(0) ack 12001
+0.0 >[noecn] E. 1001:1001(0) ack 13001
+0.0 >[noecn] E. 1001:1001(0) ack 14001
// Write a packet
+0.1 write(3, ..., 1000) = 1000
+0.0 >[ect0] PE. 1001:2001(1000) ack 14001
// Pure ACK received
+0.01 <[noecn] W. 14001:14001(0) ack 2001 win 65535
// Since CWR was sent, this packet should NOT have ECE set
+0.1 write(3, ..., 1000) = 1000
+0.0 >[ect0] P. 2001:3001(1000) ack 14001
// but Linux will still keep ECE latched here, with packetdrill
// flagging a missing ECE flag, expecting
// >[ect0] PE. 2001:3001(1000) ack 14001
// in the script
In the situation above we will continue to send ECN ECHO packets
and trigger the peer to reduce the congestion window. To avoid that
we can check CWR on pure ACKs received.
v3:
- Add a sequence check to avoid sending an ACK to an ACK
v2:
- Adjusted the comment
- move CWR check before checking for unacknowledged packets
Signed-off-by: Denis Kirjanov <denis.kirjanov@suse.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
QCOM KRYO{3,4}XX silver/LITTLE CPU cores are based on
Cortex-A55 and are SSB safe, hence add them to SSB
safelist -> arm64_ssb_cpus[].
Reported-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200625103123.7240-1-saiprakash.ranjan@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
The skcipher API dynamically instantiates the transformation object
on request that implements the requested algorithm optimally on the
given platform. This notion of optimality only matters for cases like
bulk network or disk encryption, where performance can be a bottleneck,
or in cases where the algorithm itself is not known at compile time.
In the mscc case, we are dealing with AES encryption of a single
block, and so neither concern applies, and we are better off using
the AES library interface, which is lightweight and safe for this
kind of use.
Note that the scatterlist API does not permit references to buffers
that are located on the stack, so the existing code is incorrect in
any case, but avoiding the skcipher and scatterlist APIs entirely is
the most straight-forward approach to fixing this.
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Fixes: 28c5107aa9 ("net: phy: mscc: macsec support")
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull NVMe fixes from Christoph.
* 'nvme-5.8' of git://git.infradead.org/nvme:
nvme-multipath: fix bogus request queue reference put
nvme-multipath: fix deadlock due to head->lock
nvme: don't protect ns mutation with ns->head->lock
nvme-multipath: fix deadlock between ana_work and scan_work
nvme: fix possible deadlock when I/O is blocked
nvme-rdma: assign completion vector correctly
nvme-loop: initialize tagset numa value to the value of the ctrl
nvme-tcp: initialize tagset numa value to the value of the ctrl
nvme-pci: initialize tagset numa value to the value of the ctrl
nvme-pci: override the value of the controller's numa node
nvme: set initial value for controller's numa node
SR-IOV VFs do not implement the memory enable bit of the command
register, therefore this bit is not set in config space after
pci_enable_device(). This leads to an unintended difference
between PF and VF in hand-off state to the user. We can correct
this by setting the initial value of the memory enable bit in our
virtualized config space. There's really no need however to
ever fault a user on a VF though as this would only indicate an
error in the user's management of the enable bit, versus a PF
where the same access could trigger hardware faults.
Fixes: abafbc551f ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
- Fix kernel crash on system call single stepping.
- Make sure early program check handler is executed with DAT on to
avoid an endless program check loop.
- Add __GFP_NOWARN flag to debug feature to avoid user triggerable
allocation failure messages.
-----BEGIN PGP SIGNATURE-----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=3+EZ
-----END PGP SIGNATURE-----
Merge tag 's390-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix kernel crash on system call single stepping.
- Make sure early program check handler is executed with DAT on to
avoid an endless program check loop.
- Add __GFP_NOWARN flag to debug feature to avoid user triggerable
allocation failure messages.
* tag 's390-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/debug: avoid kernel warning on too large number of pages
s390/kasan: fix early pgm check handler execution
s390: fix system call single stepping
A collection of small fixes gathered in the last two weeks.
The major changes here are fixes for the recent DPCM regressions found
on i.MX and Qualcomm platforms and fixes for resource leaks in ASoC
DAI registrations.
Other than those are mostly device-specific fixes including the usual
USB- and HD-audio quirks, and a fix for syzkaller case and ID updates
for new Intel platforms.
-----BEGIN PGP SIGNATURE-----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=QatL
-----END PGP SIGNATURE-----
Merge tag 'sound-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes gathered in the last two weeks.
The major changes here are fixes for the recent DPCM regressions found
on i.MX and Qualcomm platforms and fixes for resource leaks in ASoC
DAI registrations.
Other than those are mostly device-specific fixes including the usual
USB- and HD-audio quirks, and a fix for syzkaller case and ID updates
for new Intel platforms"
* tag 'sound-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (32 commits)
ALSA: usb-audio: Fix OOB access of mixer element list
ALSA: usb-audio: add quirk for Samsung USBC Headset (AKG)
ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Flight S
ASoC: rockchip: Fix a reference count leak.
ASoC: amd: closing specific instance.
ALSA: hda: Intel: add missing PCI IDs for ICL-H, TGL-H and EKL
ASoC: hdac_hda: fix memleak with regmap not freed on remove
ASoC: SOF: Intel: add PCI IDs for ICL-H and TGL-H
ASoC: SOF: Intel: add PCI ID for CometLake-S
ASoC: Intel: SOF: merge COMETLAKE_LP and COMETLAKE_H
ALSA: hda/realtek: Add mute LED and micmute LED support for HP systems
ALSA: usb-audio: Fix potential use-after-free of streams
ALSA: hda/realtek - Add quirk for MSI GE63 laptop
ASoC: fsl_ssi: Fix bclk calculation for mono channel
ASoC: SOF: Intel: hda: Clear RIRB status before reading WP
ASoC: rt1015: Update rt1015 default register value according to spec modification.
ASoC: qcom: common: set correct directions for dailinks
ASoc: q6afe: add support to get port direction
ASoC: soc-pcm: fix checks for multi-cpu FE dailinks
ASoC: rt5682: Let dai clks be registered whether mclk exists or not
...
A KCSAN build revealed we have explicit annoations through atomic_*()
usage, switch to arch_atomic_*() for the respective functions.
vmlinux.o: warning: objtool: rcu_nmi_exit()+0x4d: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: rcu_dynticks_eqs_enter()+0x25: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: rcu_nmi_enter()+0x4f: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: rcu_dynticks_eqs_exit()+0x2a: call to __kcsan_check_access() leaves .noinstr.text section
vmlinux.o: warning: objtool: __rcu_is_watching()+0x25: call to __kcsan_check_access() leaves .noinstr.text section
Additionally, without the NOP in instrumentation_begin(), objtool would
not detect the lack of the 'else instrumentation_begin();' branch in
rcu_nmi_enter().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Architectures with instrumented (KASAN/KCSAN) atomic operations
natively provide arch_atomic_ variants that are not instrumented.
It turns out that some generic code also requires arch_atomic_ in
order to avoid instrumentation, so provide the arch_atomic_ interface
as a direct map into the regular atomic_ interface for
non-instrumented architectures.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
A 32-bit perf querying the registers of a compat task using REGS_ABI_32
will receive zeroes from w15, when it expects to find the PC.
Return the PC value for register dwarf register 15 when returning register
values for a compat task to perf.
Cc: <stable@vger.kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jiping Ma <jiping.ma2@windriver.com>
Link: https://lore.kernel.org/r/1589165527-188401-1-git-send-email-jiping.ma2@windriver.com
[will: Shuffled code and added a comment]
Signed-off-by: Will Deacon <will@kernel.org>
io_do_iopoll() won't do anything with a request unless
req->iopoll_completed is set. So io_complete_rw_iopoll() has to set
it, otherwise io_do_iopoll() will poll a file again and again even
though the request of interest was completed long time ago.
Also, remove -EAGAIN check from io_issue_sqe() as it races with
the changed lines. The request will take the long way and be
resubmitted from io_iopoll*().
io_kiocb's result and iopoll_completed")
Fixes: bbde017a32 ("io_uring: add memory barrier to synchronize
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement call_cpuidle_s2idle() in analogy with call_cpuidle()
for the s2idle-specific idle state entry and invoke it from
cpuidle_idle_call() to make the s2idle-specific idle entry code
path look more similar to the "regular" idle entry one.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Chen Yu <yu.c.chen@intel.com>
vmlinux.o: warning: objtool: exc_invalid_op()+0x47: call to probe_kernel_read() leaves .noinstr.text section
Since we use UD2 as a short-cut for 'CALL __WARN', treat it as such.
Have the bare exception handler do the report_bug() thing.
Fixes: 15a416e8aa ("x86/entry: Treat BUG/WARN as NMI-like entries")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200622114713.GE577403@hirez.programming.kicks-ass.net
