mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 14:15:10 +07:00
21a85bd601
6862 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
cb8e59cc87 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
|
||
|
Linus Torvalds
|
039aeb9deb |
ARM:
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested virtualization
- Nested AMD event injection facelift, building on the rework of generic code
and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page fault
work, will come next week.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7VJcYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPf6QgAq4wU5wdd1lTGz/i3DIhNVJNJgJlp
ozLzRdMaJbdbn5RpAK6PEBd9+pt3+UlojpFB3gpJh2Nazv2OzV4yLQgXXXyyMEx1
5Hg7b4UCJYDrbkCiegNRv7f/4FWDkQ9dx++RZITIbxeskBBCEI+I7GnmZhGWzuC4
7kj4ytuKAySF2OEJu0VQF6u0CvrNYfYbQIRKBXjtOwuRK4Q6L63FGMJpYo159MBQ
asg3B1jB5TcuGZ9zrjL5LkuzaP4qZZHIRs+4kZsH9I6MODHGUxKonrkablfKxyKy
CFK+iaHCuEXXty5K0VmWM3nrTfvpEjVjbMc7e1QGBQ5oXsDM0pqn84syRg==
=v7Wn
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested
virtualization
- Nested AMD event injection facelift, building on the rework of
generic code and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch
with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host
side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page
fault work, will come next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (256 commits)
KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test
KVM: check userspace_addr for all memslots
KVM: selftests: update hyperv_cpuid with SynDBG tests
x86/kvm/hyper-v: Add support for synthetic debugger via hypercalls
x86/kvm/hyper-v: enable hypercalls regardless of hypercall page
x86/kvm/hyper-v: Add support for synthetic debugger interface
x86/hyper-v: Add synthetic debugger definitions
KVM: selftests: VMX preemption timer migration test
KVM: nVMX: Fix VMX preemption timer migration
x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit
KVM: x86/pmu: Support full width counting
KVM: x86/pmu: Tweak kvm_pmu_get_msr to pass 'struct msr_data' in
KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT
KVM: x86: acknowledgment mechanism for async pf page ready notifications
KVM: x86: interrupt based APF 'page ready' event delivery
KVM: introduce kvm_read_guest_offset_cached()
KVM: rename kvm_arch_can_inject_async_page_present() to kvm_arch_can_dequeue_async_page_present()
KVM: x86: extend struct kvm_vcpu_pv_apf_data with token info
Revert "KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously"
KVM: VMX: Replace zero-length array with flexible-array
...
|
||
|
Linus Torvalds
|
f3cdc8ae11 |
for-5.8-tag
-----BEGIN PGP SIGNATURE-----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=qTt8
-----END PGP SIGNATURE-----
Merge tag 'for-5.8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Highlights:
- speedup dead root detection during orphan cleanup, eg. when there
are many deleted subvolumes waiting to be cleaned, the trees are
now looked up in radix tree instead of a O(N^2) search
- snapshot creation with inherited qgroup will mark the qgroup
inconsistent, requires a rescan
- send will emit file capabilities after chown, this produces a
stream that does not need postprocessing to set the capabilities
again
- direct io ported to iomap infrastructure, cleaned up and simplified
code, notably removing last use of struct buffer_head in btrfs code
Core changes:
- factor out backreference iteration, to be used by ordinary
backreferences and relocation code
- improved global block reserve utilization
* better logic to serialize requests
* increased maximum available for unlink
* improved handling on large pages (64K)
- direct io cleanups and fixes
* simplify layering, where cloned bios were unnecessarily created
for some cases
* error handling fixes (submit, endio)
* remove repair worker thread, used to avoid deadlocks during
repair
- refactored block group reading code, preparatory work for new type
of block group storage that should improve mount time on large
filesystems
Cleanups:
- cleaned up (and slightly sped up) set/get helpers for metadata data
structure members
- root bit REF_COWS got renamed to SHAREABLE to reflect the that the
blocks of the tree get shared either among subvolumes or with the
relocation trees
Fixes:
- when subvolume deletion fails due to ENOSPC, the filesystem is not
turned read-only
- device scan deals with devices from other filesystems that changed
ownership due to overwrite (mkfs)
- fix a race between scrub and block group removal/allocation
- fix long standing bug of a runaway balance operation, printing the
same line to the syslog, caused by a stale status bit on a reloc
tree that prevented progress
- fix corrupt log due to concurrent fsync of inodes with shared
extents
- fix space underflow for NODATACOW and buffered writes when it for
some reason needs to fallback to COW mode"
* tag 'for-5.8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (133 commits)
btrfs: fix space_info bytes_may_use underflow during space cache writeout
btrfs: fix space_info bytes_may_use underflow after nocow buffered write
btrfs: fix wrong file range cleanup after an error filling dealloc range
btrfs: remove redundant local variable in read_block_for_search
btrfs: open code key_search
btrfs: split btrfs_direct_IO to read and write part
btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK
fs: remove dio_end_io()
btrfs: switch to iomap_dio_rw() for dio
iomap: remove lockdep_assert_held()
iomap: add a filesystem hook for direct I/O bio submission
fs: export generic_file_buffered_read()
btrfs: turn space cache writeout failure messages into debug messages
btrfs: include error on messages about failure to write space/inode caches
btrfs: remove useless 'fail_unlock' label from btrfs_csum_file_blocks()
btrfs: do not ignore error from btrfs_next_leaf() when inserting checksums
btrfs: make checksum item extension more efficient
btrfs: fix corrupt log due to concurrent fsync of inodes with shared extents
btrfs: unexport btrfs_compress_set_level()
btrfs: simplify iget helpers
...
|
||
|
Linus Torvalds
|
96ed320d52 |
New code for 5.8:
- Clean up io_is_direct.
- Add a new statx flag to indicate when file data access is being done
via DAX (as opposed to the page cache).
- Update the documentation for how system administrators and application
programmers can take advantage of the (still experimental DAX) feature.
-----BEGIN PGP SIGNATURE-----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=rS19
-----END PGP SIGNATURE-----
Merge tag 'vfs-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull DAX updates part one from Darrick Wong:
"After many years of LKML-wrangling about how to enable programs to
query and influence the file data access mode (DAX) when a filesystem
resides on storage devices such as persistent memory, Ira Weiny has
emerged with a proposed set of standard behaviors that has not been
shot down by anyone! We're more or less standardizing on the current
XFS behavior and adapting ext4 to do the same.
This is the first of a handful pull requests that will make ext4 and
XFS present a consistent interface for user programs that care about
DAX. We add a statx attribute that programs can check to see if DAX is
enabled on a particular file. Then, we update the DAX documentation to
spell out the user-visible behaviors that filesystems will guarantee
(until the next storage industry shakeup). The on-disk inode flag has
been in XFS for a few years now.
Summary:
- Clean up io_is_direct.
- Add a new statx flag to indicate when file data access is being
done via DAX (as opposed to the page cache).
- Update the documentation for how system administrators and
application programmers can take advantage of the (still
experimental DAX) feature"
Link: https://lore.kernel.org/lkml/20200505002016.1085071-1-ira.weiny@intel.com/
* tag 'vfs-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
Documentation/dax: Update Usage section
fs/stat: Define DAX statx attribute
fs: Remove unneeded IS_DAX() check in io_is_direct()
|
||
|
Linus Torvalds
|
d9afbb3509 |
Merge branch 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull lockdown update from James Morris: "An update for the security subsystem to allow unprivileged users to see the status of the lockdown feature. From Jeremy Cline" Also an added comment to describe CAP_SETFCAP. * 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: capabilities: add description for CAP_SETFCAP lockdown: Allow unprivileged users to see lockdown status |
||
|
Linus Torvalds
|
9d99b1647f |
audit/stable-5.8 PR 20200601
-----BEGIN PGP SIGNATURE-----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=iLfC
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Summary of the significant patches:
- Record information about binds/unbinds to the audit multicast
socket. This helps identify which processes have/had access to the
information in the audit stream.
- Cleanup and add some additional information to the netfilter
configuration events collected by audit.
- Fix some of the audit error handling code so we don't leak network
namespace references"
* tag 'audit-pr-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: add subj creds to NETFILTER_CFG record to
audit: Replace zero-length array with flexible-array
audit: make symbol 'audit_nfcfgs' static
netfilter: add audit table unregister actions
audit: tidy and extend netfilter_cfg x_tables
audit: log audit netlink multicast bind and unbind
audit: fix a net reference leak in audit_list_rules_send()
audit: fix a net reference leak in audit_send_reply()
|
||
|
Stefan Hajnoczi
|
56f2e3b7d8 |
capabilities: add description for CAP_SETFCAP
Document the purpose of CAP_SETFCAP. For some reason this capability had no description while the others did. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: James Morris <jmorris@namei.org> |
||
|
Linus Torvalds
|
1ee08de1e2 |
for-5.8/io_uring-2020-06-01
-----BEGIN PGP SIGNATURE-----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=A/qA
-----END PGP SIGNATURE-----
Merge tag 'for-5.8/io_uring-2020-06-01' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
"A relatively quiet round, mostly just fixes and code improvements. In
particular:
- Make statx just use the generic statx handler, instead of open
coding it. We don't need that anymore, as we always call it async
safe (Bijan)
- Enable closing of the ring itself. Also fixes O_PATH closure (me)
- Properly name completion members (me)
- Batch reap of dead file registrations (me)
- Allow IORING_OP_POLL with double waitqueues (me)
- Add tee(2) support (Pavel)
- Remove double off read (Pavel)
- Fix overflow cancellations (Pavel)
- Improve CQ timeouts (Pavel)
- Async defer drain fixes (Pavel)
- Add support for enabling/disabling notifications on a registered
eventfd (Stefano)
- Remove dead state parameter (Xiaoguang)
- Disable SQPOLL submit on dying ctx (Xiaoguang)
- Various code cleanups"
* tag 'for-5.8/io_uring-2020-06-01' of git://git.kernel.dk/linux-block: (29 commits)
io_uring: fix overflowed reqs cancellation
io_uring: off timeouts based only on completions
io_uring: move timeouts flushing to a helper
statx: hide interfaces no longer used by io_uring
io_uring: call statx directly
statx: allow system call to be invoked from io_uring
io_uring: add io_statx structure
io_uring: get rid of manual punting in io_close
io_uring: separate DRAIN flushing into a cold path
io_uring: don't re-read sqe->off in timeout_prep()
io_uring: simplify io_timeout locking
io_uring: fix flush req->refs underflow
io_uring: don't submit sqes when ctx->refs is dying
io_uring: async task poll trigger cleanup
io_uring: add tee(2) support
splice: export do_tee()
io_uring: don't repeat valid flag list
io_uring: rename io_file_put()
io_uring: remove req->needs_fixed_files
io_uring: cleanup io_poll_remove_one() logic
...
|
||
|
Linus Torvalds
|
bce159d734 |
for-5.8/drivers-2020-06-01
-----BEGIN PGP SIGNATURE-----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=H+/Z
-----END PGP SIGNATURE-----
Merge tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"On top of the core changes, here are the block driver changes for this
merge window:
- NVMe changes:
- NVMe over Fibre Channel protocol updates, which also reach
over to drivers/scsi/lpfc (James Smart)
- namespace revalidation support on the target (Anthony
Iliopoulos)
- gcc zero length array fix (Arnd Bergmann)
- nvmet cleanups (Chaitanya Kulkarni)
- misc cleanups and fixes (me, Keith Busch, Sagi Grimberg)
- use a SRQ per completion vector (Max Gurtovoy)
- fix handling of runtime changes to the queue count (Weiping
Zhang)
- t10 protection information support for nvme-rdma and
nvmet-rdma (Israel Rukshin and Max Gurtovoy)
- target side AEN improvements (Chaitanya Kulkarni)
- various fixes and minor improvements all over, icluding the
nvme part of the lpfc driver"
- Floppy code cleanup series (Willy, Denis)
- Floppy contention fix (Jiri)
- Loop CONFIGURE support (Martijn)
- bcache fixes/improvements (Coly, Joe, Colin)
- q->queuedata cleanups (Christoph)
- Get rid of ioctl_by_bdev (Christoph, Stefan)
- md/raid5 allocation fixes (Coly)
- zero length array fixes (Gustavo)
- swim3 task state fix (Xu)"
* tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block: (166 commits)
bcache: configure the asynchronous registertion to be experimental
bcache: asynchronous devices registration
bcache: fix refcount underflow in bcache_device_free()
bcache: Convert pr_<level> uses to a more typical style
bcache: remove redundant variables i and n
lpfc: Fix return value in __lpfc_nvme_ls_abort
lpfc: fix axchg pointer reference after free and double frees
lpfc: Fix pointer checks and comments in LS receive refactoring
nvme: set dma alignment to qword
nvmet: cleanups the loop in nvmet_async_events_process
nvmet: fix memory leak when removing namespaces and controllers concurrently
nvmet-rdma: add metadata/T10-PI support
nvmet: add metadata support for block devices
nvmet: add metadata/T10-PI support
nvme: add Metadata Capabilities enumerations
nvmet: rename nvmet_check_data_len to nvmet_check_transfer_len
nvmet: rename nvmet_rw_len to nvmet_rw_data_len
nvmet: add metadata characteristics for a namespace
nvme-rdma: add metadata/T10-PI support
nvme-rdma: introduce nvme_rdma_sgl structure
...
|
||
|
Linus Torvalds
|
faa392181a |
drm pull for 5.8-rc1
core:
- uapi: error out EBUSY when existing master
- uapi: rework SET/DROP MASTER permission handling
- remove drm_pci.h
- drm_pci* are now legacy
- introduced managed DRM resources
- subclassing support for drm_framebuffer
- simple encoder helper
- edid improvements
- vblank + writeback documentation improved
- drm/mm - optimise tree searches
- port drivers to use devm_drm_dev_alloc
dma-buf:
- add flag for p2p buffer support
mst:
- ACT timeout improvements
- remove drm_dp_mst_has_audio
- don't use 2nd TX slot - spec recommends against it
bridge:
- dw-hdmi various improvements
- chrontel ch7033 support
- fix stack issues with old gcc
hdmi:
- add unpack function for drm infoframe
fbdev:
- misc fbdev driver fixes
i915:
- uapi: global sseu pinning
- uapi: OA buffer polling
- uapi: remove generated perf code
- uapi: per-engine default property values in sysfs
- Tigerlake GEN12 enabled.
- Lots of gem refactoring
- Tigerlake enablement patches
- move to drm_device logging
- Icelake gamma HW readout
- push MST link retrain to hotplug work
- bandwidth atomic helpers
- ICL fixes
- RPS/GT refactoring
- Cherryview full-ppgtt support
- i915 locking guidelines documented
- require linear fb stride to be 512 multiple on gen9
- Tigerlake SAGV support
amdgpu:
- uapi: encrypted GPU memory handling
- uapi: add MEM_SYNC IB flag
- p2p dma-buf support
- export VRAM dma-bufs
- FRU chip access support
- RAS/SR-IOV updates
- Powerplay locking fixes
- VCN DPG (powergating) enablement
- GFX10 clockgating fixes
- DC fixes
- GPU reset fixes
- navi SDMA fix
- expose FP16 for modesetting
- DP 1.4 compliance fixes
- gfx10 soft recovery
- Improved Critical Thermal Faults handling
- resizable BAR on gmc10
amdkfd:
- uapi: GWS resource management
- track GPU memory per process
- report PCI domain in topology
radeon:
- safe reg list generator fixes
nouveau:
- HD audio fixes on recent systems
- vGPU detection (fail probe if we're on one, for now)
- Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it)
- SVM improvements/fixes
- NVIDIA format modifier support
- Misc other fixes.
adv7511:
- HDMI SPDIF support
ast:
- allocate crtc state size
- fix double assignment
- fix suspend
bochs:
- drop connector register
cirrus:
- move to tiny drivers.
exynos:
- fix imported dma-buf mapping
- enable runtime PM
- fixes and cleanups
mediatek:
- DPI pin mode swap
- config mipi_tx current/impedance
lima:
- devfreq + cooling device support
- task handling improvements
- runtime PM support
pl111:
- vexpress init improvements
- fix module auto-load
rcar-du:
- DT bindings conversion to YAML
- Planes zpos sanity check and fix
- MAINTAINERS entry for LVDS panel driver
mcde:
- fix return value
mgag200:
- use managed config init
stm:
- read endpoints from DT
vboxvideo:
- use PCI managed functions
- drop WC mtrr
vkms:
- enable cursor by default
rockchip:
- afbc support
virtio:
- various cleanups
qxl:
- fix cursor notify port
hisilicon:
- 128-byte stride alignment fix
sun4i:
- improved format handling
-----BEGIN PGP SIGNATURE-----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=H7IS
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights:
- Core DRM had a lot of refactoring around managed drm resources to
make drivers simpler.
- Intel Tigerlake support is on by default
- amdgpu now support p2p PCI buffer sharing and encrypted GPU memory
Details:
core:
- uapi: error out EBUSY when existing master
- uapi: rework SET/DROP MASTER permission handling
- remove drm_pci.h
- drm_pci* are now legacy
- introduced managed DRM resources
- subclassing support for drm_framebuffer
- simple encoder helper
- edid improvements
- vblank + writeback documentation improved
- drm/mm - optimise tree searches
- port drivers to use devm_drm_dev_alloc
dma-buf:
- add flag for p2p buffer support
mst:
- ACT timeout improvements
- remove drm_dp_mst_has_audio
- don't use 2nd TX slot - spec recommends against it
bridge:
- dw-hdmi various improvements
- chrontel ch7033 support
- fix stack issues with old gcc
hdmi:
- add unpack function for drm infoframe
fbdev:
- misc fbdev driver fixes
i915:
- uapi: global sseu pinning
- uapi: OA buffer polling
- uapi: remove generated perf code
- uapi: per-engine default property values in sysfs
- Tigerlake GEN12 enabled.
- Lots of gem refactoring
- Tigerlake enablement patches
- move to drm_device logging
- Icelake gamma HW readout
- push MST link retrain to hotplug work
- bandwidth atomic helpers
- ICL fixes
- RPS/GT refactoring
- Cherryview full-ppgtt support
- i915 locking guidelines documented
- require linear fb stride to be 512 multiple on gen9
- Tigerlake SAGV support
amdgpu:
- uapi: encrypted GPU memory handling
- uapi: add MEM_SYNC IB flag
- p2p dma-buf support
- export VRAM dma-bufs
- FRU chip access support
- RAS/SR-IOV updates
- Powerplay locking fixes
- VCN DPG (powergating) enablement
- GFX10 clockgating fixes
- DC fixes
- GPU reset fixes
- navi SDMA fix
- expose FP16 for modesetting
- DP 1.4 compliance fixes
- gfx10 soft recovery
- Improved Critical Thermal Faults handling
- resizable BAR on gmc10
amdkfd:
- uapi: GWS resource management
- track GPU memory per process
- report PCI domain in topology
radeon:
- safe reg list generator fixes
nouveau:
- HD audio fixes on recent systems
- vGPU detection (fail probe if we're on one, for now)
- Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it)
- SVM improvements/fixes
- NVIDIA format modifier support
- Misc other fixes.
adv7511:
- HDMI SPDIF support
ast:
- allocate crtc state size
- fix double assignment
- fix suspend
bochs:
- drop connector register
cirrus:
- move to tiny drivers.
exynos:
- fix imported dma-buf mapping
- enable runtime PM
- fixes and cleanups
mediatek:
- DPI pin mode swap
- config mipi_tx current/impedance
lima:
- devfreq + cooling device support
- task handling improvements
- runtime PM support
pl111:
- vexpress init improvements
- fix module auto-load
rcar-du:
- DT bindings conversion to YAML
- Planes zpos sanity check and fix
- MAINTAINERS entry for LVDS panel driver
mcde:
- fix return value
mgag200:
- use managed config init
stm:
- read endpoints from DT
vboxvideo:
- use PCI managed functions
- drop WC mtrr
vkms:
- enable cursor by default
rockchip:
- afbc support
virtio:
- various cleanups
qxl:
- fix cursor notify port
hisilicon:
- 128-byte stride alignment fix
sun4i:
- improved format handling"
* tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm: (1401 commits)
drm/amd/display: Fix potential integer wraparound resulting in a hang
drm/amd/display: drop cursor position check in atomic test
drm/amdgpu: fix device attribute node create failed with multi gpu
drm/nouveau: use correct conflicting framebuffer API
drm/vblank: Fix -Wformat compile warnings on some arches
drm/amdgpu: Sync with VM root BO when switching VM to CPU update mode
drm/amd/display: Handle GPU reset for DC block
drm/amdgpu: add apu flags (v2)
drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and raven
drm/amdgpu: fix pm sysfs node handling (v2)
drm/amdgpu: move gpu_info parsing after common early init
drm/amdgpu: move discovery gfx config fetching
drm/nouveau/dispnv50: fix runtime pm imbalance on error
drm/nouveau: fix runtime pm imbalance on error
drm/nouveau: fix runtime pm imbalance on error
drm/nouveau/debugfs: fix runtime pm imbalance on error
drm/nouveau/nouveau/hmm: fix migrate zero page to GPU
drm/nouveau/nouveau/hmm: fix nouveau_dmem_chunk allocations
drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST
drm/nouveau/kms/nv50-: Move 8BPC limit for MST into nv50_mstc_get_modes()
...
|
||
|
Linus Torvalds
|
c5d6c13843 |
MMC core:
- Enable erase/discard/trim support for all (e)MMC/SD hosts
- Export information through sysfs about enhanced RPMB support (eMMC v5.1+)
- Align the initialization commands for SDIO cards
- Fix SDIO initialization to prevent memory leaks and NULL pointer errors
- Do not export undefined MMC_NAME/MODALIAS for SDIO cards
- Export device/vendor field from common CIS for SDIO cards
- Move SDIO IDs from functional drivers to the common SDIO header
- Introduce the ->request_atomic() host ops
MMC host:
- Improve support for HW busy signaling for several hosts
- Converting some DT bindings to the json-schema
- meson-mx-sdhc: Add driver and DT doc for the Amlogic Meson SDHC controller
- meson-mx-sdio: Run a soft reset to recover from timeout/CRC error
- mmci: Convert to use mmc_regulator_set_vqmmc()
- mmci_stm32_sdmmc: Fix a couple of DMA bugs
- mmci_stm32_sdmmc: Fix power on issue
- renesas,mmcif,sdhci: Document r8a7742 DT bindings
- renesas_sdhi: Add support for M3-W ES1.2 and 1.3 revisions
- renesas_sdhi: Improvements to the TAP selection
- renesas_sdhi/tmio: Further fixup runtime PM management at ->remove()
- sdhci: Introduce ops to dump vendor specific registers
- sdhci-cadence: Fix PHY write sequence
- sdhci-esdhc-imx: Improve tunings
- sdhci-esdhc-imx: Enable GPIO card detect as system wakeup
- sdhci-esdhc-imx: Add HS400 support for i.MX6SLL
- sdhci-esdhc-mcf: Add driver for the Coldfire/M5441X esdhc controller
- m68k: mcf5441x: Add platform data to enable esdhc mmc controller
- sdhci-msm: Improve HS400 tuning
- sdhci-msm: Dump vendor specific registers at error
- sdhci-msm: Add support for DLL/DDR properties provided from DT
- sdhci-msm: Add support for the sm8250 variant
- sdhci-msm: Add support for DVFS by converting to dev_pm_opp_set_rate()
- sdhci-of-arasan: Add support for Intel Keem Bay variant
- sdhci-of-arasan: Add support for Xilinx Versal SD variant
- sdhci-of-dwcmshc: Add support for system suspend/resume
- sdhci-of-dwcmshc: Fix UHS signaling support
- sdhci-of-esdhc: Fix tuning for eMMC HS400 mode
- sdhci-pci-gli: Add Genesys Logic GL9763E support
- sdhci-sprd: Add support for the ->request_atomic() ops
- sdhci-tegra: Avoid reading autocal timeout values when not applicable
MEMSTICK:
- Minor trivial update.
-----BEGIN PGP SIGNATURE-----
iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAl7UuIIXHHVsZi5oYW5z
c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCnzog/9GLeCHnaXan3uKU0NwWBpbiP0
RIqty/wYJpnWwL1J+otWLjVamuy/DSF4Bv4Fz+L+lXTzXWK+htXpWUragsvOeCj5
KHxSl/rASVo/zg5FOCCcq1+rYfRitAFqkWTYv0uFX+G/jcAcrspVJET3SfVYpVI4
fT2VP3zWXEh4yxJUCwnzqVPR3rsTdRob9csvpz2tuBRBUt0Vg+Kfc+NLi2EZzdsJ
GDmiYOlch4Lx+8tUtRQQUX4MTVYMWCCkfL0RhYH8+kgcD8xK/LorN0Xb6FPTln95
hVPFTP3siojnj41UWQETqVnps7nsD+1ekLqehvNq6oLy7X4JDhWxu6bk3w7Gb2ox
fk/L5x1ZFP+NFN8bvb3KPESfCKf4miuQ3fgRNad+FES7oqjN8ec55gB3oC2q5K8/
RrBFrtrcFTWBqxeYPxBMdBdj1tS7yfNPOavQg9iVGjzqJfnoMXfsKHrrTeZmGdZZ
4HudtV4BzSNUCmkvqho6TvFbLslfJ2a1RkV3tXijgbFknDoqD5rclm7KPp/ZQhH6
5ExnQpqd2EsHykJE2Zu4UxWW5f8TUBT2iBhVmTyQzrzijCtdmUkpbViaJXU0/yLD
/k+MbiiJQ4ZTpcOFMeZ73J2WFU4xLyjY4magtWtBlPUZiONQy68zQ2GVdQ0AlXEt
kbWvC7mMAYXiMJyAF9c=
=1bkc
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Enable erase/discard/trim support for all (e)MMC/SD hosts
- Export information through sysfs about enhanced RPMB support (eMMC v5.1+)
- Align the initialization commands for SDIO cards
- Fix SDIO initialization to prevent memory leaks and NULL pointer errors
- Do not export undefined MMC_NAME/MODALIAS for SDIO cards
- Export device/vendor field from common CIS for SDIO cards
- Move SDIO IDs from functional drivers to the common SDIO header
- Introduce the ->request_atomic() host ops
MMC host:
- Improve support for HW busy signaling for several hosts
- Converting some DT bindings to the json-schema
- meson-mx-sdhc: Add driver and DT doc for the Amlogic Meson SDHC controller
- meson-mx-sdio: Run a soft reset to recover from timeout/CRC error
- mmci: Convert to use mmc_regulator_set_vqmmc()
- mmci_stm32_sdmmc: Fix a couple of DMA bugs
- mmci_stm32_sdmmc: Fix power on issue
- renesas,mmcif,sdhci: Document r8a7742 DT bindings
- renesas_sdhi: Add support for M3-W ES1.2 and 1.3 revisions
- renesas_sdhi: Improvements to the TAP selection
- renesas_sdhi/tmio: Further fixup runtime PM management at ->remove()
- sdhci: Introduce ops to dump vendor specific registers
- sdhci-cadence: Fix PHY write sequence
- sdhci-esdhc-imx: Improve tunings
- sdhci-esdhc-imx: Enable GPIO card detect as system wakeup
- sdhci-esdhc-imx: Add HS400 support for i.MX6SLL
- sdhci-esdhc-mcf: Add driver for the Coldfire/M5441X esdhc controller
- m68k: mcf5441x: Add platform data to enable esdhc mmc controller
- sdhci-msm: Improve HS400 tuning
- sdhci-msm: Dump vendor specific registers at error
- sdhci-msm: Add support for DLL/DDR properties provided from DT
- sdhci-msm: Add support for the sm8250 variant
- sdhci-msm: Add support for DVFS by converting to dev_pm_opp_set_rate()
- sdhci-of-arasan: Add support for Intel Keem Bay variant
- sdhci-of-arasan: Add support for Xilinx Versal SD variant
- sdhci-of-dwcmshc: Add support for system suspend/resume
- sdhci-of-dwcmshc: Fix UHS signaling support
- sdhci-of-esdhc: Fix tuning for eMMC HS400 mode
- sdhci-pci-gli: Add Genesys Logic GL9763E support
- sdhci-sprd: Add support for the ->request_atomic() ops
- sdhci-tegra: Avoid reading autocal timeout values when not applicable
MEMSTICK:
- Minor trivial update"
* tag 'mmc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (127 commits)
dt-bindings: mmc: Convert sdhci-pxa to json-schema
mmc: sdhci-msm: Clear tuning done flag while hs400 tuning
mmc: core: Export device/vendor ids from Common CIS for SDIO cards
mmc: core: Do not export MMC_NAME= and MODALIAS=mmc:block for SDIO cards
mmc: sdhci-of-at91: fix CALCR register being rewritten
mmc: sdhci-esdhc-imx: disable the CMD CRC check for standard tuning
mmc: sdhci-esdhc-imx: fix the mask for tuning start point
mmc: host: sdhci-esdhc-imx: add wakeup feature for GPIO CD pin
mmc: mmci_sdmmc: fix DMA API warning max segment size
mmc: mmci_sdmmc: fix DMA API warning overlapping mappings
mmc: sdhci-of-arasan: Add support for Intel Keem Bay
dt-bindings: mmc: arasan: Add compatible strings for Intel Keem Bay
mmc: sdhci-cadence: fix PHY write
mmc: sdio: Sort all SDIO IDs in common include file
mmc: sdio: Fix Cypress SDIO IDs macros in common include file
mmc: sdio: Move SDIO IDs from b43-sdio driver to common include file
mmc: sdio: Move SDIO IDs from ath10k driver to common include file
mmc: sdio: Move SDIO IDs from ath6kl driver to common include file
mmc: sdio: Move SDIO IDs from smssdio driver to common include file
mmc: sdio: Move SDIO IDs from btmtksdio driver to common include file
...
|
||
|
Daniel Borkmann
|
7cdec54f97 |
bpf: Add csum_level helper for fixing up csum levels
Add a bpf_csum_level() helper which BPF programs can use in combination
with bpf_skb_adjust_room() when they pass in BPF_F_ADJ_ROOM_NO_CSUM_RESET
flag to the latter to avoid falling back to CHECKSUM_NONE.
The bpf_csum_level() allows to adjust CHECKSUM_UNNECESSARY skb->csum_levels
via BPF_CSUM_LEVEL_{INC,DEC} which calls __skb_{incr,decr}_checksum_unnecessary()
on the skb. The helper also allows a BPF_CSUM_LEVEL_RESET which sets the skb's
csum to CHECKSUM_NONE as well as a BPF_CSUM_LEVEL_QUERY to just return the
current level. Without this helper, there is no way to otherwise adjust the
skb->csum_level. I did not add an extra dummy flags as there is plenty of free
bitspace in level argument itself iff ever needed in future.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/279ae3717cb3d03c0ffeb511493c93c450a01e1a.1591108731.git.daniel@iogearbox.net
|
||
|
Daniel Borkmann
|
836e66c218 |
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
Lorenz recently reported:
In our TC classifier cls_redirect [0], we use the following sequence of
helper calls to decapsulate a GUE (basically IP + UDP + custom header)
encapsulated packet:
bpf_skb_adjust_room(skb, -encap_len, BPF_ADJ_ROOM_MAC, BPF_F_ADJ_ROOM_FIXED_GSO)
bpf_redirect(skb->ifindex, BPF_F_INGRESS)
It seems like some checksums of the inner headers are not validated in
this case. For example, a TCP SYN packet with invalid TCP checksum is
still accepted by the network stack and elicits a SYN ACK. [...]
That is, we receive the following packet from the driver:
| ETH | IP | UDP | GUE | IP | TCP |
skb->ip_summed == CHECKSUM_UNNECESSARY
ip_summed is CHECKSUM_UNNECESSARY because our NICs do rx checksum offloading.
On this packet we run skb_adjust_room_mac(-encap_len), and get the following:
| ETH | IP | TCP |
skb->ip_summed == CHECKSUM_UNNECESSARY
Note that ip_summed is still CHECKSUM_UNNECESSARY. After bpf_redirect()'ing
into the ingress, we end up in tcp_v4_rcv(). There, skb_checksum_init() is
turned into a no-op due to CHECKSUM_UNNECESSARY.
The bpf_skb_adjust_room() helper is not aware of protocol specifics. Internally,
it handles the CHECKSUM_COMPLETE case via skb_postpull_rcsum(), but that does
not cover CHECKSUM_UNNECESSARY. In this case skb->csum_level of the original
skb prior to bpf_skb_adjust_room() call was 0, that is, covering UDP. Right now
there is no way to adjust the skb->csum_level. NICs that have checksum offload
disabled (CHECKSUM_NONE) or that support CHECKSUM_COMPLETE are not affected.
Use a safe default for CHECKSUM_UNNECESSARY by resetting to CHECKSUM_NONE and
add a flag to the helper called BPF_F_ADJ_ROOM_NO_CSUM_RESET that allows users
from opting out. Opting out is useful for the case where we don't remove/add
full protocol headers, or for the case where a user wants to adjust the csum
level manually e.g. through bpf_csum_level() helper that is added in subsequent
patch.
The bpf_skb_proto_{4_to_6,6_to_4}() for NAT64/46 translation from the BPF
bpf_skb_change_proto() helper uses bpf_skb_net_hdr_{push,pop}() pair internally
as well but doesn't change layers, only transitions between v4 to v6 and vice
versa, therefore no adoption is required there.
[0] https://lore.kernel.org/bpf/20200424185556.7358-1-lmb@cloudflare.com/
Fixes:
|
||
|
Linus Torvalds
|
f359287765 |
Merge branch 'from-miklos' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro: "Assorted patches from Miklos. An interesting part here is /proc/mounts stuff..." The "/proc/mounts stuff" is using a cursor for keeeping the location data while traversing the mount listing. Also probably worth noting is the addition of faccessat2(), which takes an additional set of flags to specify how the lookup is done (AT_EACCESS, AT_SYMLINK_NOFOLLOW, AT_EMPTY_PATH). * 'from-miklos' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: add faccessat2 syscall vfs: don't parse "silent" option vfs: don't parse "posixacl" option vfs: don't parse forbidden flags statx: add mount_root statx: add mount ID statx: don't clear STATX_ATIME on SB_RDONLY uapi: deprecate STATX_ALL utimensat: AT_EMPTY_PATH support vfs: split out access_override_creds() proc/mounts: add cursor aio: fix async fsync creds vfs: allow unprivileged whiteout creation |
||
|
Linus Torvalds
|
b23c4771ff |
A fair amount of stuff this time around, dominated by yet another massive
set from Mauro toward the completion of the RST conversion. I *really* hope we are getting close to the end of this. Meanwhile, those patches reach pretty far afield to update document references around the tree; there should be no actual code changes there. There will be, alas, more of the usual trivial merge conflicts. Beyond that we have more translations, improvements to the sphinx scripting, a number of additions to the sysctl documentation, and lots of fixes. -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl7VId8PHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5Yq/gH/iaDgirQZV6UZ2v9sfwQNYolNpf2sKAuOZjd bPFB7WJoMQbKwQEvYrAUL2+5zPOcLYuIfzyOfo1BV1py+EyKbACcKjI4AedxfJF7 +NchmOBhlEqmEhzx2U08HRc4/8J223WG17fJRVsV3p+opJySexSFeQucfOciX5NR RUCxweWWyg/FgyqjkyMMTtsePqZPmcT5dWTlVXISlbWzcv5NFhuJXnSrw8Sfzcmm SJMzqItv3O+CabnKQ8kMLV2PozXTMfjeWH47ZUK0Y8/8PP9+cvqwFzZ0UDQJ1Xaz oyW/TqmunaXhfMsMFeFGSwtfgwRHvXdxkQdtwNHvo1dV4dzTvDw= =fDC/ -----END PGP SIGNATURE----- Merge tag 'docs-5.8' of git://git.lwn.net/linux Pull documentation updates from Jonathan Corbet: "A fair amount of stuff this time around, dominated by yet another massive set from Mauro toward the completion of the RST conversion. I *really* hope we are getting close to the end of this. Meanwhile, those patches reach pretty far afield to update document references around the tree; there should be no actual code changes there. There will be, alas, more of the usual trivial merge conflicts. Beyond that we have more translations, improvements to the sphinx scripting, a number of additions to the sysctl documentation, and lots of fixes" * tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits) Documentation: fixes to the maintainer-entry-profile template zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst tracing: Fix events.rst section numbering docs: acpi: fix old http link and improve document format docs: filesystems: add info about efivars content Documentation: LSM: Correct the basic LSM description mailmap: change email for Ricardo Ribalda docs: sysctl/kernel: document unaligned controls Documentation: admin-guide: update bug-hunting.rst docs: sysctl/kernel: document ngroups_max nvdimm: fixes to maintainter-entry-profile Documentation/features: Correct RISC-V kprobes support entry Documentation/features: Refresh the arch support status files Revert "docs: sysctl/kernel: document ngroups_max" docs: move locking-specific documents to locking/ docs: move digsig docs to the security book docs: move the kref doc into the core-api book docs: add IRQ documentation at the core-api book docs: debugging-via-ohci1394.txt: add it to the core-api book docs: fix references for ipmi.rst file ... |
||
|
Jakub Sitnicki
|
7f045a49fe |
bpf: Add link-based BPF program attachment to network namespace
Extend bpf() syscall subcommands that operate on bpf_link, that is LINK_CREATE, LINK_UPDATE, OBJ_GET_INFO, to accept attach types tied to network namespaces (only flow dissector at the moment). Link-based and prog-based attachment can be used interchangeably, but only one can exist at a time. Attempts to attach a link when a prog is already attached directly, and the other way around, will be met with -EEXIST. Attempts to detach a program when link exists result in -EINVAL. Attachment of multiple links of same attach type to one netns is not supported with the intention to lift the restriction when a use-case presents itself. Because of that link create returns -E2BIG when trying to create another netns link, when one already exists. Link-based attachments to netns don't keep a netns alive by holding a ref to it. Instead links get auto-detached from netns when the latter is being destroyed, using a pernet pre_exit callback. When auto-detached, link lives in defunct state as long there are open FDs for it. -ENOLINK is returned if a user tries to update a defunct link. Because bpf_link to netns doesn't hold a ref to struct net, special care is taken when releasing, updating, or filling link info. The netns might be getting torn down when any of these link operations are in progress. That is why auto-detach and update/release/fill_info are synchronized by the same mutex. Also, link ops have to always check if auto-detach has not happened yet and if netns is still alive (refcnt > 0). Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200531082846.2117903-5-jakub@cloudflare.com |
||
|
Linus Torvalds
|
533b220f7b |
arm64 updates for 5.8
- Branch Target Identification (BTI)
* Support for ARMv8.5-BTI in both user- and kernel-space. This
allows branch targets to limit the types of branch from which
they can be called and additionally prevents branching to
arbitrary code, although kernel support requires a very recent
toolchain.
* Function annotation via SYM_FUNC_START() so that assembly
functions are wrapped with the relevant "landing pad"
instructions.
* BPF and vDSO updates to use the new instructions.
* Addition of a new HWCAP and exposure of BTI capability to
userspace via ID register emulation, along with ELF loader
support for the BTI feature in .note.gnu.property.
* Non-critical fixes to CFI unwind annotations in the sigreturn
trampoline.
- Shadow Call Stack (SCS)
* Support for Clang's Shadow Call Stack feature, which reserves
platform register x18 to point at a separate stack for each
task that holds only return addresses. This protects function
return control flow from buffer overruns on the main stack.
* Save/restore of x18 across problematic boundaries (user-mode,
hypervisor, EFI, suspend, etc).
* Core support for SCS, should other architectures want to use it
too.
* SCS overflow checking on context-switch as part of the existing
stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
- CPU feature detection
* Removed numerous "SANITY CHECK" errors when running on a system
with mismatched AArch32 support at EL1. This is primarily a
concern for KVM, which disabled support for 32-bit guests on
such a system.
* Addition of new ID registers and fields as the architecture has
been extended.
- Perf and PMU drivers
* Minor fixes and cleanups to system PMU drivers.
- Hardware errata
* Unify KVM workarounds for VHE and nVHE configurations.
* Sort vendor errata entries in Kconfig.
- Secure Monitor Call Calling Convention (SMCCC)
* Update to the latest specification from Arm (v1.2).
* Allow PSCI code to query the SMCCC version.
- Software Delegated Exception Interface (SDEI)
* Unexport a bunch of unused symbols.
* Minor fixes to handling of firmware data.
- Pointer authentication
* Add support for dumping the kernel PAC mask in vmcoreinfo so
that the stack can be unwound by tools such as kdump.
* Simplification of key initialisation during CPU bringup.
- BPF backend
* Improve immediate generation for logical and add/sub
instructions.
- vDSO
- Minor fixes to the linker flags for consistency with other
architectures and support for LLVM's unwinder.
- Clean up logic to initialise and map the vDSO into userspace.
- ACPI
- Work around for an ambiguity in the IORT specification relating
to the "num_ids" field.
- Support _DMA method for all named components rather than only
PCIe root complexes.
- Minor other IORT-related fixes.
- Miscellaneous
* Initialise debug traps early for KGDB and fix KDB cacheflushing
deadlock.
* Minor tweaks to early boot state (documentation update, set
TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
* Refactoring and cleanup
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl7U9csQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNLBHCACs/YU4SM7Om5f+7QnxIKao5DBr2CnGGvdC
yTfDghFDTLQVv3MufLlfno3yBe5G8sQpcZfcc+hewfcGoMzVZXu8s7LzH6VSn9T9
jmT3KjDMrg0RjSHzyumJp2McyelTk0a4FiKArSIIKsJSXUyb1uPSgm7SvKVDwEwU
JGDzL9IGilmq59GiXfDzGhTZgmC37QdwRoRxDuqtqWQe5CHoRXYexg87HwBKOQxx
HgU9L7ehri4MRZfpyjaDrr6quJo3TVnAAKXNBh3mZAskVS9ZrfKpEH0kYWYuqybv
znKyHRecl/rrGePV8RTMtrwnSdU26zMXE/omsVVauDfG9hqzqm+Q
=w3qi
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"A sizeable pile of arm64 updates for 5.8.
Summary below, but the big two features are support for Branch Target
Identification and Clang's Shadow Call stack. The latter is currently
arm64-only, but the high-level parts are all in core code so it could
easily be adopted by other architectures pending toolchain support
Branch Target Identification (BTI):
- Support for ARMv8.5-BTI in both user- and kernel-space. This allows
branch targets to limit the types of branch from which they can be
called and additionally prevents branching to arbitrary code,
although kernel support requires a very recent toolchain.
- Function annotation via SYM_FUNC_START() so that assembly functions
are wrapped with the relevant "landing pad" instructions.
- BPF and vDSO updates to use the new instructions.
- Addition of a new HWCAP and exposure of BTI capability to userspace
via ID register emulation, along with ELF loader support for the
BTI feature in .note.gnu.property.
- Non-critical fixes to CFI unwind annotations in the sigreturn
trampoline.
Shadow Call Stack (SCS):
- Support for Clang's Shadow Call Stack feature, which reserves
platform register x18 to point at a separate stack for each task
that holds only return addresses. This protects function return
control flow from buffer overruns on the main stack.
- Save/restore of x18 across problematic boundaries (user-mode,
hypervisor, EFI, suspend, etc).
- Core support for SCS, should other architectures want to use it
too.
- SCS overflow checking on context-switch as part of the existing
stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
CPU feature detection:
- Removed numerous "SANITY CHECK" errors when running on a system
with mismatched AArch32 support at EL1. This is primarily a concern
for KVM, which disabled support for 32-bit guests on such a system.
- Addition of new ID registers and fields as the architecture has
been extended.
Perf and PMU drivers:
- Minor fixes and cleanups to system PMU drivers.
Hardware errata:
- Unify KVM workarounds for VHE and nVHE configurations.
- Sort vendor errata entries in Kconfig.
Secure Monitor Call Calling Convention (SMCCC):
- Update to the latest specification from Arm (v1.2).
- Allow PSCI code to query the SMCCC version.
Software Delegated Exception Interface (SDEI):
- Unexport a bunch of unused symbols.
- Minor fixes to handling of firmware data.
Pointer authentication:
- Add support for dumping the kernel PAC mask in vmcoreinfo so that
the stack can be unwound by tools such as kdump.
- Simplification of key initialisation during CPU bringup.
BPF backend:
- Improve immediate generation for logical and add/sub instructions.
vDSO:
- Minor fixes to the linker flags for consistency with other
architectures and support for LLVM's unwinder.
- Clean up logic to initialise and map the vDSO into userspace.
ACPI:
- Work around for an ambiguity in the IORT specification relating to
the "num_ids" field.
- Support _DMA method for all named components rather than only PCIe
root complexes.
- Minor other IORT-related fixes.
Miscellaneous:
- Initialise debug traps early for KGDB and fix KDB cacheflushing
deadlock.
- Minor tweaks to early boot state (documentation update, set
TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
- Refactoring and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
KVM: arm64: Move __load_guest_stage2 to kvm_mmu.h
KVM: arm64: Check advertised Stage-2 page size capability
arm64/cpufeature: Add get_arm64_ftr_reg_nowarn()
ACPI/IORT: Remove the unused __get_pci_rid()
arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register
arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register
arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register
arm64/cpufeature: Add remaining feature bits in ID_PFR0 register
arm64/cpufeature: Introduce ID_MMFR5 CPU register
arm64/cpufeature: Introduce ID_DFR1 CPU register
arm64/cpufeature: Introduce ID_PFR2 CPU register
arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0
arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register
arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register
arm64: mm: Add asid_gen_match() helper
firmware: smccc: Fix missing prototype warning for arm_smccc_version_init
arm64: vdso: Fix CFI directives in sigreturn trampoline
arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction
...
|
||
|
David Ahern
|
64b59025c1 |
xdp: Add xdp_txq_info to xdp_buff
Add xdp_txq_info as the Tx counterpart to xdp_rxq_info. At the moment only the device is added. Other fields (queue_index) can be added as use cases arise. >From a UAPI perspective, add egress_ifindex to xdp context for bpf programs to see the Tx device. Update the verifier to only allow accesses to egress_ifindex by XDP programs with BPF_XDP_DEVMAP expected attach type. Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200529220716.75383-4-dsahern@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
David Ahern
|
fbee97feed |
bpf: Add support to attach bpf program to a devmap entry
Add BPF_XDP_DEVMAP attach type for use with programs associated with a DEVMAP entry. Allow DEVMAPs to associate a program with a device entry by adding a bpf_prog.fd to 'struct bpf_devmap_val'. Values read show the program id, so the fd and id are a union. bpf programs can get access to the struct via vmlinux.h. The program associated with the fd must have type XDP with expected attach type BPF_XDP_DEVMAP. When a program is associated with a device index, the program is run on an XDP_REDIRECT and before the buffer is added to the per-cpu queue. At this point rxq data is still valid; the next patch adds tx device information allowing the prorgam to see both ingress and egress device indices. XDP generic is skb based and XDP programs do not work with skb's. Block the use case by walking maps used by a program that is to be attached via xdpgeneric and fail if any of them are DEVMAP / DEVMAP_HASH with Block attach of BPF_XDP_DEVMAP programs to devices. Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200529220716.75383-3-dsahern@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Amritha Nambiar
|
c3c16f2ea6 |
bpf: Add rx_queue_mapping to bpf_sock
Add "rx_queue_mapping" to bpf_sock. This gives read access for the
existing field (sk_rx_queue_mapping) of struct sock from bpf_sock.
Semantics for the bpf_sock rx_queue_mapping access are similar to
sk_rx_queue_get(), i.e the value NO_QUEUE_MAPPING is not allowed
and -1 is returned in that case. This is useful for transmit queue
selection based on the received queue index which is cached in the
socket in the receive path.
v3: Addressed review comments to add usecase in patch description,
and fixed default value for rx_queue_mapping.
v2: fixed build error for CONFIG_XPS wrapping, reported by
kbuild test robot <lkp@intel.com>
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Andrii Nakryiko
|
457f44363a |
bpf: Implement BPF ring buffer and verifier support for it
This commit adds a new MPSC ring buffer implementation into BPF ecosystem,
which allows multiple CPUs to submit data to a single shared ring buffer. On
the consumption side, only single consumer is assumed.
Motivation
----------
There are two distinctive motivators for this work, which are not satisfied by
existing perf buffer, which prompted creation of a new ring buffer
implementation.
- more efficient memory utilization by sharing ring buffer across CPUs;
- preserving ordering of events that happen sequentially in time, even
across multiple CPUs (e.g., fork/exec/exit events for a task).
These two problems are independent, but perf buffer fails to satisfy both.
Both are a result of a choice to have per-CPU perf ring buffer. Both can be
also solved by having an MPSC implementation of ring buffer. The ordering
problem could technically be solved for perf buffer with some in-kernel
counting, but given the first one requires an MPSC buffer, the same solution
would solve the second problem automatically.
Semantics and APIs
------------------
Single ring buffer is presented to BPF programs as an instance of BPF map of
type BPF_MAP_TYPE_RINGBUF. Two other alternatives considered, but ultimately
rejected.
One way would be to, similar to BPF_MAP_TYPE_PERF_EVENT_ARRAY, make
BPF_MAP_TYPE_RINGBUF could represent an array of ring buffers, but not enforce
"same CPU only" rule. This would be more familiar interface compatible with
existing perf buffer use in BPF, but would fail if application needed more
advanced logic to lookup ring buffer by arbitrary key. HASH_OF_MAPS addresses
this with current approach. Additionally, given the performance of BPF
ringbuf, many use cases would just opt into a simple single ring buffer shared
among all CPUs, for which current approach would be an overkill.
Another approach could introduce a new concept, alongside BPF map, to
represent generic "container" object, which doesn't necessarily have key/value
interface with lookup/update/delete operations. This approach would add a lot
of extra infrastructure that has to be built for observability and verifier
support. It would also add another concept that BPF developers would have to
familiarize themselves with, new syntax in libbpf, etc. But then would really
provide no additional benefits over the approach of using a map.
BPF_MAP_TYPE_RINGBUF doesn't support lookup/update/delete operations, but so
doesn't few other map types (e.g., queue and stack; array doesn't support
delete, etc).
The approach chosen has an advantage of re-using existing BPF map
infrastructure (introspection APIs in kernel, libbpf support, etc), being
familiar concept (no need to teach users a new type of object in BPF program),
and utilizing existing tooling (bpftool). For common scenario of using
a single ring buffer for all CPUs, it's as simple and straightforward, as
would be with a dedicated "container" object. On the other hand, by being
a map, it can be combined with ARRAY_OF_MAPS and HASH_OF_MAPS map-in-maps to
implement a wide variety of topologies, from one ring buffer for each CPU
(e.g., as a replacement for perf buffer use cases), to a complicated
application hashing/sharding of ring buffers (e.g., having a small pool of
ring buffers with hashed task's tgid being a look up key to preserve order,
but reduce contention).
Key and value sizes are enforced to be zero. max_entries is used to specify
the size of ring buffer and has to be a power of 2 value.
There are a bunch of similarities between perf buffer
(BPF_MAP_TYPE_PERF_EVENT_ARRAY) and new BPF ring buffer semantics:
- variable-length records;
- if there is no more space left in ring buffer, reservation fails, no
blocking;
- memory-mappable data area for user-space applications for ease of
consumption and high performance;
- epoll notifications for new incoming data;
- but still the ability to do busy polling for new data to achieve the
lowest latency, if necessary.
BPF ringbuf provides two sets of APIs to BPF programs:
- bpf_ringbuf_output() allows to *copy* data from one place to a ring
buffer, similarly to bpf_perf_event_output();
- bpf_ringbuf_reserve()/bpf_ringbuf_commit()/bpf_ringbuf_discard() APIs
split the whole process into two steps. First, a fixed amount of space is
reserved. If successful, a pointer to a data inside ring buffer data area
is returned, which BPF programs can use similarly to a data inside
array/hash maps. Once ready, this piece of memory is either committed or
discarded. Discard is similar to commit, but makes consumer ignore the
record.
bpf_ringbuf_output() has disadvantage of incurring extra memory copy, because
record has to be prepared in some other place first. But it allows to submit
records of the length that's not known to verifier beforehand. It also closely
matches bpf_perf_event_output(), so will simplify migration significantly.
bpf_ringbuf_reserve() avoids the extra copy of memory by providing a memory
pointer directly to ring buffer memory. In a lot of cases records are larger
than BPF stack space allows, so many programs have use extra per-CPU array as
a temporary heap for preparing sample. bpf_ringbuf_reserve() avoid this needs
completely. But in exchange, it only allows a known constant size of memory to
be reserved, such that verifier can verify that BPF program can't access
memory outside its reserved record space. bpf_ringbuf_output(), while slightly
slower due to extra memory copy, covers some use cases that are not suitable
for bpf_ringbuf_reserve().
The difference between commit and discard is very small. Discard just marks
a record as discarded, and such records are supposed to be ignored by consumer
code. Discard is useful for some advanced use-cases, such as ensuring
all-or-nothing multi-record submission, or emulating temporary malloc()/free()
within single BPF program invocation.
Each reserved record is tracked by verifier through existing
reference-tracking logic, similar to socket ref-tracking. It is thus
impossible to reserve a record, but forget to submit (or discard) it.
bpf_ringbuf_query() helper allows to query various properties of ring buffer.
Currently 4 are supported:
- BPF_RB_AVAIL_DATA returns amount of unconsumed data in ring buffer;
- BPF_RB_RING_SIZE returns the size of ring buffer;
- BPF_RB_CONS_POS/BPF_RB_PROD_POS returns current logical possition of
consumer/producer, respectively.
Returned values are momentarily snapshots of ring buffer state and could be
off by the time helper returns, so this should be used only for
debugging/reporting reasons or for implementing various heuristics, that take
into account highly-changeable nature of some of those characteristics.
One such heuristic might involve more fine-grained control over poll/epoll
notifications about new data availability in ring buffer. Together with
BPF_RB_NO_WAKEUP/BPF_RB_FORCE_WAKEUP flags for output/commit/discard helpers,
it allows BPF program a high degree of control and, e.g., more efficient
batched notifications. Default self-balancing strategy, though, should be
adequate for most applications and will work reliable and efficiently already.
Design and implementation
-------------------------
This reserve/commit schema allows a natural way for multiple producers, either
on different CPUs or even on the same CPU/in the same BPF program, to reserve
independent records and work with them without blocking other producers. This
means that if BPF program was interruped by another BPF program sharing the
same ring buffer, they will both get a record reserved (provided there is
enough space left) and can work with it and submit it independently. This
applies to NMI context as well, except that due to using a spinlock during
reservation, in NMI context, bpf_ringbuf_reserve() might fail to get a lock,
in which case reservation will fail even if ring buffer is not full.
The ring buffer itself internally is implemented as a power-of-2 sized
circular buffer, with two logical and ever-increasing counters (which might
wrap around on 32-bit architectures, that's not a problem):
- consumer counter shows up to which logical position consumer consumed the
data;
- producer counter denotes amount of data reserved by all producers.
Each time a record is reserved, producer that "owns" the record will
successfully advance producer counter. At that point, data is still not yet
ready to be consumed, though. Each record has 8 byte header, which contains
the length of reserved record, as well as two extra bits: busy bit to denote
that record is still being worked on, and discard bit, which might be set at
commit time if record is discarded. In the latter case, consumer is supposed
to skip the record and move on to the next one. Record header also encodes
record's relative offset from the beginning of ring buffer data area (in
pages). This allows bpf_ringbuf_commit()/bpf_ringbuf_discard() to accept only
the pointer to the record itself, without requiring also the pointer to ring
buffer itself. Ring buffer memory location will be restored from record
metadata header. This significantly simplifies verifier, as well as improving
API usability.
Producer counter increments are serialized under spinlock, so there is
a strict ordering between reservations. Commits, on the other hand, are
completely lockless and independent. All records become available to consumer
in the order of reservations, but only after all previous records where
already committed. It is thus possible for slow producers to temporarily hold
off submitted records, that were reserved later.
Reservation/commit/consumer protocol is verified by litmus tests in
Documentation/litmus-test/bpf-rb.
One interesting implementation bit, that significantly simplifies (and thus
speeds up as well) implementation of both producers and consumers is how data
area is mapped twice contiguously back-to-back in the virtual memory. This
allows to not take any special measures for samples that have to wrap around
at the end of the circular buffer data area, because the next page after the
last data page would be first data page again, and thus the sample will still
appear completely contiguous in virtual memory. See comment and a simple ASCII
diagram showing this visually in bpf_ringbuf_area_alloc().
Another feature that distinguishes BPF ringbuf from perf ring buffer is
a self-pacing notifications of new data being availability.
bpf_ringbuf_commit() implementation will send a notification of new record
being available after commit only if consumer has already caught up right up
to the record being committed. If not, consumer still has to catch up and thus
will see new data anyways without needing an extra poll notification.
Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbuf.c) show that
this allows to achieve a very high throughput without having to resort to
tricks like "notify only every Nth sample", which are necessary with perf
buffer. For extreme cases, when BPF program wants more manual control of
notifications, commit/discard/output helpers accept BPF_RB_NO_WAKEUP and
BPF_RB_FORCE_WAKEUP flags, which give full control over notifications of data
availability, but require extra caution and diligence in using this API.
Comparison to alternatives
--------------------------
Before considering implementing BPF ring buffer from scratch existing
alternatives in kernel were evaluated, but didn't seem to meet the needs. They
largely fell into few categores:
- per-CPU buffers (perf, ftrace, etc), which don't satisfy two motivations
outlined above (ordering and memory consumption);
- linked list-based implementations; while some were multi-producer designs,
consuming these from user-space would be very complicated and most
probably not performant; memory-mapping contiguous piece of memory is
simpler and more performant for user-space consumers;
- io_uring is SPSC, but also requires fixed-sized elements. Naively turning
SPSC queue into MPSC w/ lock would have subpar performance compared to
locked reserve + lockless commit, as with BPF ring buffer. Fixed sized
elements would be too limiting for BPF programs, given existing BPF
programs heavily rely on variable-sized perf buffer already;
- specialized implementations (like a new printk ring buffer, [0]) with lots
of printk-specific limitations and implications, that didn't seem to fit
well for intended use with BPF programs.
[0] https://lwn.net/Articles/779550/
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200529075424.3139988-2-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
John Fastabend
|
13d70f5a5e |
bpf, sk_msg: Add get socket storage helpers
Add helpers to use local socket storage. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/159033907577.12355.14740125020572756560.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Linus Torvalds
|
a7092c8204 |
Kernel side changes:
- Add AMD Fam17h RAPL support
- Introduce CAP_PERFMON to kernel and user space
- Add Zhaoxin CPU support
- Misc fixes and cleanups
Tooling changes:
perf record:
- Introduce --switch-output-event to use arbitrary events to be setup
and read from a side band thread and, when they take place a signal
be sent to the main 'perf record' thread, reusing the --switch-output
code to take perf.data snapshots from the --overwrite ring buffer, e.g.:
# perf record --overwrite -e sched:* \
--switch-output-event syscalls:*connect* \
workload
will take perf.data.YYYYMMDDHHMMSS snapshots up to around the
connect syscalls.
- Add --num-synthesize-threads option to control degree of parallelism of the
synthesize_mmap() code which is scanning /proc/PID/task/PID/maps and can be
time consuming. This mimics pre-existing behaviour in 'perf top'.
perf bench:
- Add a multi-threaded synthesize benchmark.
- Add kallsyms parsing benchmark.
Intel PT support:
- Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
- Allow using Intel PT to synthesize callchains for regular events.
- Add support for synthesizing branch stacks for regular events (cycles,
instructions, etc) from Intel PT data.
Misc changes:
- Updated perf vendor events for power9 and Coresight.
- Add flamegraph.py script via 'perf flamegraph'
- Misc other changes, fixes and cleanups - see the Git log for details.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=i27M
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Add AMD Fam17h RAPL support
- Introduce CAP_PERFMON to kernel and user space
- Add Zhaoxin CPU support
- Misc fixes and cleanups
Tooling changes:
- perf record:
Introduce '--switch-output-event' to use arbitrary events to be
setup and read from a side band thread and, when they take place a
signal be sent to the main 'perf record' thread, reusing the core
for '--switch-output' to take perf.data snapshots from the ring
buffer used for '--overwrite', e.g.:
# perf record --overwrite -e sched:* \
--switch-output-event syscalls:*connect* \
workload
will take perf.data.YYYYMMDDHHMMSS snapshots up to around the
connect syscalls.
Add '--num-synthesize-threads' option to control degree of
parallelism of the synthesize_mmap() code which is scanning
/proc/PID/task/PID/maps and can be time consuming. This mimics
pre-existing behaviour in 'perf top'.
- perf bench:
Add a multi-threaded synthesize benchmark and kallsyms parsing
benchmark.
- Intel PT support:
Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
Allow using Intel PT to synthesize callchains for regular events.
Add support for synthesizing branch stacks for regular events
(cycles, instructions, etc) from Intel PT data.
Misc changes:
- Updated perf vendor events for power9 and Coresight.
- Add flamegraph.py script via 'perf flamegraph'
- Misc other changes, fixes and cleanups - see the Git log for details
Also, since over the last couple of years perf tooling has matured and
decoupled from the kernel perf changes to a large degree, going
forward Arnaldo is going to send perf tooling changes via direct pull
requests"
* tag 'perf-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (163 commits)
perf/x86/rapl: Add AMD Fam17h RAPL support
perf/x86/rapl: Make perf_probe_msr() more robust and flexible
perf/x86/rapl: Flip logic on default events visibility
perf/x86/rapl: Refactor to share the RAPL code between Intel and AMD CPUs
perf/x86/rapl: Move RAPL support to common x86 code
perf/core: Replace zero-length array with flexible-array
perf/x86: Replace zero-length array with flexible-array
perf/x86/intel: Add more available bits for OFFCORE_RESPONSE of Intel Tremont
perf/x86/rapl: Add Ice Lake RAPL support
perf flamegraph: Use /bin/bash for report and record scripts
perf cs-etm: Move definition of 'traceid_list' global variable from header file
libsymbols kallsyms: Move hex2u64 out of header
libsymbols kallsyms: Parse using io api
perf bench: Add kallsyms parsing
perf: cs-etm: Update to build with latest opencsd version.
perf symbol: Fix kernel symbol address display
perf inject: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf annotate: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf trace: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf script: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
...
|
||
|
Linus Torvalds
|
afdb0f2ec5 |
fscrypt updates for 5.8
- Add the IV_INO_LBLK_32 encryption policy flag which modifies the encryption to be optimized for eMMC inline encryption hardware. - Make the test_dummy_encryption mount option for ext4 and f2fs support v2 encryption policies. - Fix kerneldoc warnings and some coding style inconsistencies. There will be merge conflicts with the ext4 and f2fs trees due to the test_dummy_encryption change, but the resolutions are straightforward. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCXtScMBQcZWJpZ2dlcnNA Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKxC6AP0eOEkMrc9e10YftdN6xsyRjvqiPyFg oMjuU+SvQ+/sVgEAo0mBFITnl75ZGb8PyqXCNMDAy6uHaxcEjVGufx5q2QE= =dbxy -----END PGP SIGNATURE----- Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt Pull fscrypt updates from Eric Biggers: - Add the IV_INO_LBLK_32 encryption policy flag which modifies the encryption to be optimized for eMMC inline encryption hardware. - Make the test_dummy_encryption mount option for ext4 and f2fs support v2 encryption policies. - Fix kerneldoc warnings and some coding style inconsistencies. * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: fscrypt: add support for IV_INO_LBLK_32 policies fscrypt: make test_dummy_encryption use v2 by default fscrypt: support test_dummy_encryption=v2 fscrypt: add fscrypt_add_test_dummy_key() linux/parser.h: add include guards fscrypt: remove unnecessary extern keywords fscrypt: name all function parameters fscrypt: fix all kerneldoc warnings |
||
|
Linus Torvalds
|
81e8c10dac |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "API: - Introduce crypto_shash_tfm_digest() and use it wherever possible. - Fix use-after-free and race in crypto_spawn_alg. - Add support for parallel and batch requests to crypto_engine. Algorithms: - Update jitter RNG for SP800-90B compliance. - Always use jitter RNG as seed in drbg. Drivers: - Add Arm CryptoCell driver cctrng. - Add support for SEV-ES to the PSP driver in ccp" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (114 commits) crypto: hisilicon - fix driver compatibility issue with different versions of devices crypto: engine - do not requeue in case of fatal error crypto: cavium/nitrox - Fix a typo in a comment crypto: hisilicon/qm - change debugfs file name from qm_regs to regs crypto: hisilicon/qm - add DebugFS for xQC and xQE dump crypto: hisilicon/zip - add debugfs for Hisilicon ZIP crypto: hisilicon/hpre - add debugfs for Hisilicon HPRE crypto: hisilicon/sec2 - add debugfs for Hisilicon SEC crypto: hisilicon/qm - add debugfs to the QM state machine crypto: hisilicon/qm - add debugfs for QM crypto: stm32/crc32 - protect from concurrent accesses crypto: stm32/crc32 - don't sleep in runtime pm crypto: stm32/crc32 - fix multi-instance crypto: stm32/crc32 - fix run-time self test issue. crypto: stm32/crc32 - fix ext4 chksum BUG_ON() crypto: hisilicon/zip - Use temporary sqe when doing work crypto: hisilicon - add device error report through abnormal irq crypto: hisilicon - remove codes of directly report device errors through MSI crypto: hisilicon - QM memory management optimization crypto: hisilicon - unify initial value assignment into QM ... |
||
|
Horatiu Vultur
|
c6676e7d62 |
bridge: mrp: Add support for role MRA
A node that has the MRA role, it can behave as MRM or MRC. Initially it starts as MRM and sends MRP_Test frames on both ring ports. If it detects that there are MRP_Test send by another MRM, then it checks if these frames have a lower priority than itself. In this case it would send MRP_Nack frames to notify the other node that it needs to stop sending MRP_Test frames. If it receives a MRP_Nack frame then it stops sending MRP_Test frames and starts to behave as a MRC but it would continue to monitor the MRP_Test frames send by MRM. If at a point the MRM stops to send MRP_Test frames it would get the MRM role and start to send MRP_Test frames. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Horatiu Vultur
|
4b3a61b030 |
bridge: mrp: Set the priority of MRP instance
Each MRP instance has a priority, a lower value means a higher priority. The priority of MRP instance is stored in MRP_Test frame in this way all the MRP nodes in the ring can see other nodes priority. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Horatiu Vultur
|
7e89ed8ab3 |
bridge: mrp: Update MRP frame type
Replace u16/u32 with be16/be32 in the MRP frame types. This fixes sparse warnings like: warning: cast to restricted __be16 Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Ido Schimmel
|
30a4e9a29a |
devlink: Add 'control' trap type
This type is used for traps that trap control packets such as ARP request and IGMP query to the CPU. Do not report such packets to the kernel's drop monitor as they were not dropped by the device no encountered an exception during forwarding. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Ido Schimmel
|
9eefeabed6 |
devlink: Add 'mirror' trap action
The action is used by control traps such as IGMP query. The packet is flooded by the device, but also trapped to the CPU in order for the software bridge to mark the receiving port as a multicast router port. Such packets are marked with 'skb->offload_fwd_mark = 1' in order to prevent the software bridge from flooding them again. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
David S. Miller
|
af0a2482fa |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next to extend ctnetlink and the flowtable infrastructure: 1) Extend ctnetlink kernel side netlink dump filtering capabilities, from Romain Bellan. 2) Generalise the flowtable hook parser to take a hook list. 3) Pass a hook list to the flowtable hook registration/unregistration. 4) Add a helper function to release the flowtable hook list. 5) Update the flowtable event notifier to pass a flowtable hook list. 6) Allow users to add new devices to an existing flowtables. 7) Allow users to remove devices to an existing flowtables. 8) Allow for registering a flowtable with no initial devices. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Jon Doron
|
f97f5a56f5 |
x86/kvm/hyper-v: Add support for synthetic debugger interface
Add support for Hyper-V synthetic debugger (syndbg) interface. The syndbg interface is using MSRs to emulate a way to send/recv packets data. The debug transport dll (kdvm/kdnet) will identify if Hyper-V is enabled and if it supports the synthetic debugger interface it will attempt to use it, instead of trying to initialize a network adapter. Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20200529134543.1127440-4-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Jon Doron
|
f7d31e6536 |
x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit
The problem the patch is trying to address is the fact that 'struct kvm_hyperv_exit' has different layout on when compiling in 32 and 64 bit modes. In 64-bit mode the default alignment boundary is 64 bits thus forcing extra gaps after 'type' and 'msr' but in 32-bit mode the boundary is at 32 bits thus no extra gaps. This is an issue as even when the kernel is 64 bit, the userspace using the interface can be both 32 and 64 bit but the same 32 bit userspace has to work with 32 bit kernel. The issue is fixed by forcing the 64 bit layout, this leads to ABI change for 32 bit builds and while we are obviously breaking '32 bit userspace with 32 bit kernel' case, we're fixing the '32 bit userspace with 64 bit kernel' one. As the interface has no (known) users and 32 bit KVM is rather baroque nowadays, this seems like a reasonable decision. Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20200424113746.3473563-2-arilou@gmail.com> Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Vitaly Kuznetsov
|
72de5fa4c1 |
KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT
Introduce new capability to indicate that KVM supports interrupt based delivery of 'page ready' APF events. This includes support for both MSR_KVM_ASYNC_PF_INT and MSR_KVM_ASYNC_PF_ACK. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200525144125.143875-8-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
David S. Miller
|
1806c13dc2 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
xdp_umem.c had overlapping changes between the 64-bit math fix for the calculation of npgs and the removal of the zerocopy memory type which got rid of the chunk_size_nohdr member. The mlx5 Kconfig conflict is a case where we just take the net-next copy of the Kconfig entry dependency as it takes on the ESWITCH dependency by one level of indirection which is what the 'net' conflicting change is trying to ensure. Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
David S. Miller
|
1079a34c56 |
Another set of changes, including
* many 6 GHz changes, though it's not _quite_ complete
(I left out scanning for now, we're still discussing)
* allow userspace SA-query processing for operating channel
validation
* TX status for control port TX, for AP-side operation
* more per-STA/TID control options
* move to kHz for channels, for future S1G operation
* various other small changes
-----BEGIN PGP SIGNATURE-----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=wdaG
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-davem-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Another set of changes, including
* many 6 GHz changes, though it's not _quite_ complete
(I left out scanning for now, we're still discussing)
* allow userspace SA-query processing for operating channel
validation
* TX status for control port TX, for AP-side operation
* more per-STA/TID control options
* move to kHz for channels, for future S1G operation
* various other small changes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Nathan Errera
|
093a48d2aa |
cfg80211: support bigger kek/kck key length
With some newer AKMs, the KCK and KEK are bigger, so allow that if the driver advertises support for it. In addition, add a new attribute for the AKM so we can use it for offloaded rekeying. Signed-off-by: Nathan Errera <nathan.errera@intel.com> [reword commit message] Link: https://lore.kernel.org/r/20200528212237.5eb58b00a5d1.I61b09d77c4f382e8d58a05dcca78096e99a6bc15@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Johannes Berg
|
2239521772 |
cfg80211: add and expose HE 6 GHz band capabilities
These capabilities cover what would otherwise be transported in HT/VHT capabilities, but only a subset thereof that is actually needed on 6 GHz with HE already present. Expose the capabilities to userspace, drivers are expected to set them as using the 6 GHz band (currently) requires HE capability. Link: https://lore.kernel.org/r/20200528213443.244cd5cb9db8.Icd8c773277a88c837e7e3af1d4d1013cc3b66543@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Rajkumar Manoharan
|
43e64bf301 |
cfg80211: handle 6 GHz capability of new station
Handle 6 GHz HE capability while adding new station. It will be used later in mac80211 station processing. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1589399105-25472-2-git-send-email-rmanohar@codeaurora.org [handle nl80211_set_station, require WME, remove NL80211_HE_6GHZ_CAPABILITY_LEN] Link: https://lore.kernel.org/r/20200528213443.b6b711fd4312.Ic9b97d57b6c4f2b28d4b2d23d2849d8bc20bd8cc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
David S. Miller
|
942110fdf2 |
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says: ==================== pull request (net): ipsec 2020-05-29 1) Several fixes for ESP gro/gso in transport and beet mode when IPv6 extension headers are present. From Xin Long. 2) Fix a wrong comment on XFRMA_OFFLOAD_DEV. From Antony Antony. 3) Fix sk_destruct callback handling on ESP in TCP encapsulation. From Sabrina Dubroca. 4) Fix a use after free in xfrm_output_gso when used with vxlan. From Xin Long. 5) Fix secpath handling of VTI when used wiuth IPCOMP. From Xin Long. 6) Fix an oops when deleting a x-netns xfrm interface. From Nicolas Dichtel. 7) Fix a possible warning on policy updates. We had a case where it was possible to add two policies with the same lookup keys. From Xin Long. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Jérôme Pouiller
|
83fc5dd57f |
mmc: fix compilation of user API
The definitions of MMC_IOC_CMD and of MMC_IOC_MULTI_CMD rely on
MMC_BLOCK_MAJOR:
#define MMC_IOC_CMD _IOWR(MMC_BLOCK_MAJOR, 0, struct mmc_ioc_cmd)
#define MMC_IOC_MULTI_CMD _IOWR(MMC_BLOCK_MAJOR, 1, struct mmc_ioc_multi_cmd)
However, MMC_BLOCK_MAJOR is defined in linux/major.h and
linux/mmc/ioctl.h did not include it.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200511161902.191405-1-Jerome.Pouiller@silabs.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
||
|
Ingo Molnar
|
0bffedbce9 |
Linux 5.7-rc7
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl7K9iEeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGzTAH/0ifZEG4BQ8x/WlB 8YLSLE6QQTSXYi25nyExuJbFkkKY5Tik8M2HD/36xwY/HnZOlH9jH6m0ntqZxpaA 3EU9lr1ct79nCBMYhiJssvz8d9AOZXlyogFW9y2y9pmPjlmUtseZ7yGh1xD465cj B5Ty2w2W34cs7zF3og2xn5agOJMtWWXLXZ5mRa9EOquKC5zeYyRicmd0T+plYQD6 hbRYmxFfDfppVnBCBARPNN0+NU5JJD94H+8bOuf1tl48XNrLiZMOicmtohKNQ6+W rZNpJNEGEp7KMtqWH0Nl3hmy3yfZHMwe1DXM/AZDqR7jTHZY4mZ0GEpLyfI9AU4n 34jVHwU= =SmJ9 -----END PGP SIGNATURE----- Merge tag 'v5.7-rc7' into perf/core, to pick up fixes Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Romain Bellan
|
cb8aa9a3af |
netfilter: ctnetlink: add kernel side filtering for dump
Conntrack dump does not support kernel side filtering (only get exists, but it returns only one entry. And user has to give a full valid tuple) It means that userspace has to implement filtering after receiving many irrelevant entries, consuming resources (conntrack table is sometimes very huge, much more than a routing table for example). This patch adds filtering in kernel side. To achieve this goal, we: * Add a new CTA_FILTER netlink attributes, actually a flag list to parametize filtering * Convert some *nlattr_to_tuple() functions, to allow a partial parsing of CTA_TUPLE_ORIG and CTA_TUPLE_REPLY (so nf_conntrack_tuple it not fully set) Filtering is now possible on: * IP SRC/DST values * Ports for TCP and UDP flows * IMCP(v6) codes types and IDs Filtering is done as an "AND" operator. For example, when flags PROTO_SRC_PORT, PROTO_NUM and IP_SRC are sets, only entries matching all values are dumped. Changes since v1: Set NLM_F_DUMP_FILTERED in nlm flags if entries are filtered Changes since v2: Move several constants to nf_internals.h Move a fix on netlink values check in a separate patch Add a check on not-supported flags Return EOPNOTSUPP if CDA_FILTER is set in ctnetlink_flush_conntrack (not yet implemented) Code style issues Changes since v3: Fix compilation warning reported by kbuild test robot Changes since v4: Fix a regression introduced in v3 (returned EINVAL for valid netlink messages without CTA_MARK) Changes since v5: Change definition of CTA_FILTER_F_ALL Fix a regression when CTA_TUPLE_ZONE is not set Signed-off-by: Romain Bellan <romain.bellan@wifirst.fr> Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |
||
|
Horatiu Vultur
|
20f6a05ef6 |
bridge: mrp: Rework the MRP netlink interface
This patch reworks the MRP netlink interface. Before, each attribute represented a binary structure which made it hard to be extended. Therefore update the MRP netlink interface such that each existing attribute to be a nested attribute which contains the fields of the binary structures. In this way the MRP netlink interface can be extended without breaking the backwards compatibility. It is also using strict checking for attributes under the MRP top attribute. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Hauke Mehrtens
|
1b9ae0c929 |
wireless: Use linux/stddef.h instead of stddef.h
When compiling inside the kernel include linux/stddef.h instead of
stddef.h. When I compile this header file in backports for power PC I
run into a conflict with ptrdiff_t. I was unable to reproduce this in
mainline kernel. I still would like to fix this problem in the kernel.
Fixes:
|
||
|
Tamizh Chelvam
|
9a5f648862 |
nl80211: Add support to configure TID specific Tx rate configuration
This patch adds support to configure per TID Tx Rate configuration through NL80211_TID_CONFIG_ATTR_TX_RATE* attributes. And it uses nl80211_parse_tx_bitrate_mask api to validate the Tx rate mask. Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> Link: https://lore.kernel.org/r/1589357504-10175-1-git-send-email-tamizhr@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Markus Theil
|
dca9ca2d58 |
nl80211: add ability to report TX status for control port TX
This adds the necessary capabilities in nl80211 to allow drivers to assign a cookie to control port TX frames (returned via extack in the netlink ACK message of the command) and then later report the frame's status. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200508144202.7678-2-markus.theil@tu-ilmenau.de [use extack cookie instead of explicit message, recombine patches] Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Thomas Pedersen
|
2032f3b2f9 |
nl80211: support scan frequencies in KHz
If the driver advertises NL80211_EXT_FEATURE_SCAN_FREQ_KHZ userspace can omit NL80211_ATTR_SCAN_FREQUENCIES in favor of an NL80211_ATTR_SCAN_FREQ_KHZ. To get scan results in KHz userspace must also set the NL80211_SCAN_FLAG_FREQ_KHZ. This lets nl80211 remain compatible with older userspaces while not requring and sending redundant (and potentially incorrect) scan frequency sets. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200430172554.18383-4-thomas@adapt-ip.com [use just nla_nest_start() (not _noflag) for NL80211_ATTR_SCAN_FREQ_KHZ] Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Thomas Pedersen
|
942ba88ba9 |
nl80211: add KHz frequency offset for most wifi commands
cfg80211 recently gained the ability to understand a frequency offset component in KHz. Expose this in nl80211 through the new attributes NL80211_ATTR_WIPHY_FREQ_OFFSET, NL80211_FREQUENCY_ATTR_OFFSET, NL80211_ATTR_CENTER_FREQ1_OFFSET, and NL80211_BSS_FREQUENCY_OFFSET. These add support to send and receive a KHz offset component with the following NL80211 commands: - NL80211_CMD_FRAME - NL80211_CMD_GET_SCAN - NL80211_CMD_AUTHENTICATE - NL80211_CMD_ASSOCIATE - NL80211_CMD_CONNECT Along with any other command which takes a chandef, ie: - NL80211_CMD_SET_CHANNEL - NL80211_CMD_SET_WIPHY - NL80211_CMD_START_AP - NL80211_CMD_RADAR_DETECT - NL80211_CMD_NOTIFY_RADAR - NL80211_CMD_CHANNEL_SWITCH - NL80211_JOIN_IBSS - NL80211_CMD_REMAIN_ON_CHANNEL - NL80211_CMD_JOIN_OCB - NL80211_CMD_JOIN_MESH - NL80211_CMD_TDLS_CHANNEL_SWITCH If the driver advertises a band containing channels with frequency offset, it must also verify support for frequency offset channels in its cfg80211 ops, or return an error. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200430172554.18383-3-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Sergey Matyukevich
|
c03369558c |
nl80211: simplify peer specific TID configuration
Current rule for applying TID configuration for specific peer looks overly complicated. No need to reject new TID configuration when override flag is specified. Another call with the same TID configuration, but without override flag, allows to apply new configuration anyway. Use the same approach as for the 'all peers' case: if override flag is specified, then reset existing TID configuration and immediately apply a new one. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200424112905.26770-5-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |