mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
21a3f6e531
1501 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
721afaa2ae |
ARM: Device-tree updates
As always, a large number of DT updates. Too many to enumerate them all,
but at a glance:
New SoCs introduced in this release:
- Amlogic:
+ Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some set
top boxes and other products.
- Mediatek:
+ MT7623A, which is a flavor of the MT7623 family with other on-chip
ethernet options.
- Qualcomm:
+ SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845
(Cortex-A75/A55 derivative) SoC that's one of the current high-end
mobile SoCs.
It's great to see mainline support for it. So far, you
can't do much with it, since a lot of peripherals are not yet in the
DTs but driver support for USB, GPU and other pieces are starting to
trickle in. This might end up being a well-supported SoC upstream if
the momentum keeps up.
- Renesas:
+ R8A77990, a.k.a R-Car E3, a new automotive entertainment-targeted
SoC. Currently only one Cortex-A53 CPU is enabled, we are eagerly
awaiting more. So far, basic drivers such as serial, gpios, PMU and
ethernet are enabled.
+ R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR
GPU. Same here, basic set of drivers such as serial, gpios and ethernet
enabled, and SMP support is also forthcoming.
- STMicroelectronics:
+ STM32F469, very similar tih STM32F429 but with display support
Enhancements to SoCs/platforms (DTS contents, some driver portions might
not be in yet):
- Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc
- Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets
- Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces
- Marvell Berlin2CD: SMP support, thermal sensors
- Mediatek MT7623: Highspeed DMA, audio support
- Qualcomm IPQ8074 PCIe support, MSM8996 UFS support
- Renesas: Watchdog and PMU support across many platforms
- Rockchip RK3399: USB3 OTG support
- Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3
- STMicro STM32: Lots of peripherals added to STM32MP175C
- Uniphier: Ethernet support
New boards:
- Allwinner A20: Olimex A20-SOM-EVB-eMMC variant
- Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version)
- Allwinner A33: Nintendo NES/SuperNES Classic Edition
- Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune
- Berlin2CD: Valve Steam Link
- Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1
- Broadcom: Raspberry Pi 3 B+
- Mediatek MT7623N and MT7623A: reference boards
- Meson 8M2: Tronsmart MXIII Plus
- NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj
- Qualcomm MSM8974: Sony Xperia Z1 Compact support
- Qualcomm SDM845: MTP development board
- Renesas: Ebisu R8A77990 board
- Renesas RZ/G1C: iwg23s: iWave G235-SDB
- TI am335x: Pocketbeagle support
-----BEGIN PGP SIGNATURE-----
iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlsfBtUPHG9sb2ZAbGl4
b20ubmV0AAoJEIwa5zzehBx3wfYQAI1hlPhRx7H1zbc59zdlW6daY7y1+dXuqoCs
K5Hxsurlsbnx9fjeGcBp/razL5YtdZmBYII8IBhKzhLKp/A0gqmX7W9pTNQj9/Sp
SOIl8dci/yr0HUpgwc4IdVhJBdpplv48GK3q8opSocI/J9dnD873NHLlvTpCB+Jy
GCD9tB56JnOfTO+n0Yg+tyuig1jIQCc52Iwnmxv2vYPbsHUaEmqz1Z+wBe0BaDk+
eVsohNQI/2xxRzv8PE13H/ojcZ532rF45aw6ypRwCvg1MzCYXSdKLJlIWx8Ci581
YmRPlCOWai+AxSATgJhIR9n9dxn6hqxEgVyu7AOxPVa0O4DKB3oy8PPo5wlOCKcU
J1n5zJwnULWw4eVa1ag/cEMbz95QMC1F9MmyiLUfz3esHwyD/Gl3ks9v1gwn9XYp
xsI+oGnMy/Uz4oZ1/XM5CO5UUDXyixVD3pYEF8wLaYX2JY8zETI5qfvNL0bwZX3P
lLFCI7Xdwsk3+HCp7aHs4KkWHLVGq65SxrXKTIpU+vEq+0RYiV/cWP9Swa/RNrMH
gB00oZ2TBRuIr/KxsCKyCkKApocW4J4WtZ2sMY7QDXzW68lq8oIbefY+6Abgk4/7
6J7D5n0gmTB38wrzZCY5UF0eQrLjPwnxuLywEll5oLFbNTr/7Aruk2kFYEMGjM9E
QmXGoHXU
=jLvk
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree updates from Olof Johansson:
"As always, a large number of DT updates. Too many to enumerate them
all, but at a glance:
New SoCs introduced in this release:
- Amlogic:
+ Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some
set top boxes and other products.
- Mediatek:
+ MT7623A, which is a flavor of the MT7623 family with other
on-chip ethernet options.
- Qualcomm:
+ SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845
(Cortex-A75/A55 derivative) SoC that's one of the current
high-end mobile SoCs.
It's great to see mainline support for it. So far, you can't do
much with it, since a lot of peripherals are not yet in the DTs
but driver support for USB, GPU and other pieces are starting to
trickle in. This might end up being a well-supported SoC
upstream if the momentum keeps up.
- Renesas:
+ R8A77990, a.k.a R-Car E3, a new automotive
entertainment-targeted SoC. Currently only one Cortex-A53 CPU is
enabled, we are eagerly awaiting more. So far, basic drivers
such as serial, gpios, PMU and ethernet are enabled.
+ R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR
GPU. Same here, basic set of drivers such as serial, gpios and
ethernet enabled, and SMP support is also forthcoming.
- STMicroelectronics:
+ STM32F469, very similar tih STM32F429 but with display support
Enhancements to SoCs/platforms (DTS contents, some driver portions
might not be in yet):
- Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc
- Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets
- Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces
- Marvell Berlin2CD: SMP support, thermal sensors
- Mediatek MT7623: Highspeed DMA, audio support
- Qualcomm IPQ8074 PCIe support, MSM8996 UFS support
- Renesas: Watchdog and PMU support across many platforms
- Rockchip RK3399: USB3 OTG support
- Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3
- STMicro STM32: Lots of peripherals added to STM32MP175C
- Uniphier: Ethernet support
New boards:
- Allwinner A20: Olimex A20-SOM-EVB-eMMC variant
- Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version)
- Allwinner A33: Nintendo NES/SuperNES Classic Edition
- Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune
- Berlin2CD: Valve Steam Link
- Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1
- Broadcom: Raspberry Pi 3 B+
- Mediatek MT7623N and MT7623A: reference boards
- Meson 8M2: Tronsmart MXIII Plus
- NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj
- Qualcomm MSM8974: Sony Xperia Z1 Compact support
- Qualcomm SDM845: MTP development board
- Renesas: Ebisu R8A77990 board
- Renesas RZ/G1C: iwg23s: iWave G235-SDB
- TI am335x: Pocketbeagle support"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (448 commits)
ARM: dts: aspeed: Fix hwrng register address
arm64: dts: sprd: whale2: Add the rtc enable clock for watchdog
arm64: dts: sprd: Add GPIO and GPIO keys device nodes
arm64: dts: sprd: fix typo in 'remote-endpoint'
arm64: dts: apq8096-db820c: Removed bt-en-1-8v regulator
arm64: dts: fix regulator property name for wlan pcie endpoint
arm64: dts: qcom: msm8996: Use UFS_GDSC for UFS
ARM: dts: pxa3xx: fix MMC clocks
ARM: pxa: dts: add pin definitions for extended GPIOs
ARM: pxa: dts: add gpio-ranges to gpio controller
ARM: dts: ipq8074: Enable few peripherals for hk01 board
ARM: dts: ipq8074: Add pcie nodes
ARM: dts: ipq8074: Add peripheral nodes
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi
ARM: dts: ipq4019: Change the max opp frequency
...
|
||
|
Linus Torvalds
|
7c00e8ae04 |
ARM: SoC platform updates
Here are the main updates for SoC support (besides DT additions) for ARM 32- and 64-bit platforms. The branch also contains defconfig updates to turn on drivers and options as needed on the various platforms. The largest parts of the delta are from cleanups moving platform data and board file setup of TI platforms to ti-sysc bus drivers. There are also some sweeping changes of eeprom and nand setup on Davinci, i.MX and other platforms. Samsung is removing support for Exynos5440, which was an oddball SoC that hasn't been seen much use in designs. Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D). Linus Walleij is also removing support for ux500 (Sony Ericsson) U8540/9540 SoCs that never made it to significant mass production and products. -----BEGIN PGP SIGNATURE----- iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlsfCGIPHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx3Ks8P/3j87Za+6OTCzo+lW2byUy1CI4muGwxNSIxX 65A1Wt2qvRDxjCX4MI5Cx8P1YdYJv+5ZF2p4vdlgQXoz3/XDbG+lxJ+/lyWl/+MK 9kGsQWwEVicbGkaJCYR4ZKvfAwZ9jf7+cndY0Vgii44xQLsQZHEIfIO+mdlK43GZ xqaSckLQQzsDqjMUIckiyVy97RsDk1eLK+H2I+l7qs9v0z5UnhoD2CTxX5LzT8eH NlFmfUPN7Znshmt0aMznZyBRr2oM5Dsg49SfG0WhbOzyiZjSpw8MQ0N+RzyROhhB h5PjyuZN9fx2dO8Jjkqt3B8KmGFNDarGOmrasIJeCJDFRa9NStqFn0y4qJXS2wU7 4La3GoBYRV8x0gq339pQ+70qKuD06e62GL7kV656yi+93CitWxy6IjrIACjSX6zH PD1hQpewfXAcHAHdBqNevRcz/sjG+36GJSCgI4umSP48NMlCuZafFAT4U/PVlt4E 6VRQDeoi5ZFYIuPL1+bZvHax4fFxJGnaf02uQ/OPYP1o48AueSSvdo6bUPFbhwOD u0/uo3r+HxtQsw9I3tP3kj3/775BJclkO6zbG/dGZ8obuzuDwhuFtr3rzCrP/IzN n3rcBuFNZE6SQeKU+Tvmnh8ZLhJc5L8EYvqmihZj+BSfprBc8POFR2la4MRnHSn+ tPEC/n9E =S5wc -----END PGP SIGNATURE----- Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Here are the main updates for SoC support (besides DT additions) for ARM 32- and 64-bit platforms. The branch also contains defconfig updates to turn on drivers and options as needed on the various platforms. The largest parts of the delta are from cleanups moving platform data and board file setup of TI platforms to ti-sysc bus drivers. There are also some sweeping changes of eeprom and nand setup on Davinci, i.MX and other platforms. Samsung is removing support for Exynos5440, which was an oddball SoC that hasn't been seen much use in designs. Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D). Linus Walleij is also removing support for ux500 (Sony Ericsson) U8540/9540 SoCs that never made it to significant mass production and products" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) MAINTAINERS: add NXP linux team maillist as i.MX reviewer ARM: stm32: Don't select DMA unconditionally on STM32MP157C arm64: defconfig: Enable PCIe on msm8996 and db820c ARM: pxa3xx: enable external wakeup pins ARM: pxa: stargate2: use device properties for at24 eeprom arm64: defconfig: Enable HISILICON_LPC arm64: defconfig: enable drivers for Poplar support arm64: defconfig: Enable UFS on msm8996 ARM: berlin: switch to SPDX license identifier arm: berlin: remove non-necessary flush_cache_all() ARM: berlin: extend BG2CD Kconfig entry OMAP: CLK: CLKSRC: Add suspend resume hooks ARM: AM43XX: Add functions to save/restore am43xx control registers ASoC: ams_delta: use GPIO lookup table ARM: OMAP1: ams-delta: add GPIO lookup tables bus: ti-sysc: Fix optional clocks array access ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore ... |
||
|
Linus Torvalds
|
6419945e33 |
This time we have a good set of changes to the core framework that do some
general cleanups, but nothing too major. The majority of the diff goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for Actions Semi so it takes up some lines to add all the different types, and the Qualcomm diff is there because we add support for two SoCs and it's quite a bit of data. Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And then the long tail of driver updates for various fixes and stuff follows after that. Core: - debugfs cleanups removing error checking and an unused provider API - Removal of a clk init typedef that isn't used - Usage of match_string() to simplify parent string name matching - OF clk helpers moved to their own file (linux/of_clk.h) - Make clk warnings more readable across kernel versions New Drivers: - Qualcomm SDM845 GCC and Video clk controllers - Qualcomm MSM8998 GCC - Actions Semi S900 SoC support - Nuvoton npcm750 microcontroller clks - Amlogic axg AO clock controller Removed Drivers: - Deprecated Rockchip clk-gate driver Updates: - debugfs functions stopped checking return values - Support for the MSIOF module clocks on Rensas R-Car M3-N - Support for the new Rensas RZ/G1C and R-Car E3 SoCs - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs - Berlin and Amlogic SPDX tagging - Usage of of_clk_get_parent_count() in more places - Proper implementation of the CDEV1/2 clocks on Tegra20 - Allwinner H6 PRCM clock support and R40 EMAC support - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet - Round closest support for meson's mpll driver - Support for meson8b nand clocks and gxbb video decoder clocks - Mediatek mali clks - STM32MP1 fixes - Uniphier LD11/LD20 stream demux system clock -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlsWxugACgkQrQKIl8bk lSVs2A/9HOMsWeiYx1MESrXw6N2UknWeqeT/b1v8L/VOiptJg+OTExPbzmSylngv AXJAfIkCpguSMh9b310pA3DAzk5docmbQ4zL977yY+KXmOcDooCd34aG5a+tB3ie ugC8T2bQLrJdMp3hsqaKZsYzqe7LoW2NJgoliXDMA/QUBLpvHq+fcu2zOawingTA GNc3LGqP5Op7p09aPK30gtQNqLK5qGpHASa/AY7Y0PXlUeTZ8rmF06fcEAg5shkC CT57Zy2rSFB2RorEJarYXDPLRHMw/jxXtpMVXEy7zuz/3ajvvRiZDHv75+NaBru9 hDt1rzslzexEN4fYzj4AtGYRKyBrHbDaxG1qdIWPWVyoE0CEb+dZ1gH7/Ski5r+s z5D28NogC0T0sey6yWssyG3RLvkPJ5nxUhL++siHm1lbyo16LmhB1+nFvxrlzmBB 0V1xqEa7feYpD+JD66lJFb5ornHLwGtVYBpeiY+hrDR3ddWEe1IxaYGR2p9nHwSS Us/ZQdHIYBVEqoo3+BWnTn+HSQzmd/sqHqWnLlVWUHoomm5nXx18PeS87vFbcPv9 dMr+FFJ3Elubzcy5UZJPfNw+pb+teE7tYGQkQ3nbLRxT1YZOoIJZJDqNKxM1cgne 6c/VXJMEyBBn/w7Iru/3eWCZVQJGlmYS47DFDzduFvd3LMfmKIM= =KK/v -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time we have a good set of changes to the core framework that do some general cleanups, but nothing too major. The majority of the diff goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for Actions Semi so it takes up some lines to add all the different types, and the Qualcomm diff is there because we add support for two SoCs and it's quite a bit of data. Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And then the long tail of driver updates for various fixes and stuff follows after that. Core: - debugfs cleanups removing error checking and an unused provider API - Removal of a clk init typedef that isn't used - Usage of match_string() to simplify parent string name matching - OF clk helpers moved to their own file (linux/of_clk.h) - Make clk warnings more readable across kernel versions New Drivers: - Qualcomm SDM845 GCC and Video clk controllers - Qualcomm MSM8998 GCC - Actions Semi S900 SoC support - Nuvoton npcm750 microcontroller clks - Amlogic axg AO clock controller Removed Drivers: - Deprecated Rockchip clk-gate driver Updates: - debugfs functions stopped checking return values - Support for the MSIOF module clocks on Rensas R-Car M3-N - Support for the new Rensas RZ/G1C and R-Car E3 SoCs - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs - Berlin and Amlogic SPDX tagging - Usage of of_clk_get_parent_count() in more places - Proper implementation of the CDEV1/2 clocks on Tegra20 - Allwinner H6 PRCM clock support and R40 EMAC support - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet - Round closest support for meson's mpll driver - Support for meson8b nand clocks and gxbb video decoder clocks - Mediatek mali clks - STM32MP1 fixes - Uniphier LD11/LD20 stream demux system clock" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) clk: qcom: Export clk_fabia_pll_configure() clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc clk-si544: Properly round requested frequency to nearest match clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted clk: use match_string() helper clk: bcm2835: use match_string() helper clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions clk: imx6: add EPIT clock support clk: mvebu: use correct bit for 98DX3236 NAND ... |
||
|
Linus Torvalds
|
289cf155d9 |
DeviceTree updates for v4.18:
- Sync dtc with upstream version v1.4.6-21-g84e414b0b5bc. This adds new warnings which are either fixed or disabled by default (enabled with W=1). - Validate an untrusted offset in DT overlay function update_usages_of_a_phandle_reference - Fix a use after free error of_platform_device_destroy - Fix an off by 1 string errors in unittest - Avoid creating a struct device for OPP nodes - Update DT specific submitting-patches.txt with patch content and subject requirements. - Move some bindings to their proper subsystem locations - Add vendor prefixes for Kaohsiung, SiFive, Avnet, Wi2Wi, Logic PD, and ArcherMind - Add documentation for "no-gpio-delays" property in FSI bus GPIO master - Add compatible for r8a77990 SoC ravb ethernet block - More wack-a-mole removal of 'status' property in examples -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAlsX7EMQHHJvYmhAa2Vy bmVsLm9yZwAKCRD6+121jbxhwymLD/0b71t4fwg2n/vkrKHXp/NyGNv2mcDjl2Yo VEFKvRrUEVQNQHfUAgo9aaI71+prr7a4MB9o3GE4NBO+IsY5YpK+TYpVj2M2cVqW giIjivOw8+sxJFnAGpYoxqwHtdm9fkdQEnLl/x90QBw0ZicDXC9MAnIaLUqVqoM9 6GbFODyb6Z2lzw73d5Gvg/fvxdlANWvOMLwz6w6Xd8/bN9+FCEjhxSIyNJO2ASCb dAju6EFqqvJvRs2WYjnDABOW/ujl95RuP0NVuZ0b+FfHQSNzKk9IxCFHAFUaw5Md SqbqkKkhJamnAtETIV5r//bMBpiLO8a9BwJexXo+E1ftR8isbQMhLmD9kBsLDL8A s4wDfAeqKSqH9RAsCaWb50POafe4LwCzKQGMiZUXsGeiHv/lIS2t5ybwmJ+LrDiL nIIcX2fDAgjG1FPH3sMKNiwYhJQwsBFmgB4qvCNcGhDhi587gM6TehcBznX/tscQ o4AY/qTmsCcabI9/3V6JEMelHZ5WfARGBSID4QEFqWIxKXDDIhH4JCjRdyCJIK0M zKaE0uqlrDsVOPLHqAphoc0ebuCgU6SxcI1EXX2fMaaAJSmrr7G1N2abTJSHSJ03 ApYHPn5AJGq/xIpE4955h9CRKN4ftu+sTfkPx9KmnRysf5DntuRRQtuSuFXcJ9mO vtKp3kWFWQ== =2b7G -----END PGP SIGNATURE----- Merge tag 'devicetree-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - Sync dtc with upstream version v1.4.6-21-g84e414b0b5bc. This adds new warnings which are either fixed or disabled by default (enabled with W=1). - Validate an untrusted offset in DT overlay function update_usages_of_a_phandle_reference - Fix a use after free error of_platform_device_destroy - Fix an off by 1 string errors in unittest - Avoid creating a struct device for OPP nodes - Update DT specific submitting-patches.txt with patch content and subject requirements. - Move some bindings to their proper subsystem locations - Add vendor prefixes for Kaohsiung, SiFive, Avnet, Wi2Wi, Logic PD, and ArcherMind - Add documentation for "no-gpio-delays" property in FSI bus GPIO master - Add compatible for r8a77990 SoC ravb ethernet block - More wack-a-mole removal of 'status' property in examples * tag 'devicetree-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (25 commits) dt-bindings: submitting-patches: add guidance on patch content and subject of: platform: stop accessing invalid dev in of_platform_device_destroy dt-bindings: net: ravb: Add support for r8a77990 SoC dt-bindings: Add vendor prefix for ArcherMind dt-bindings: fsi-master-gpio: Document "no-gpio-delays" property dt-bindings: Add vendor prefix for Logic PD of: overlay: validate offset from property fixups of: unittest: for strings, account for trailing \0 in property length field drm: rcar-du: disable dtc graph-endpoint warnings on DT overlays kbuild: disable new dtc graph and unit-address warnings scripts/dtc: Update to upstream version v1.4.6-21-g84e414b0b5bc MAINTAINERS: add keyword for devicetree overlay notifiers dt-bindings: define vendor prefix for Wi2Wi, Inc. dt-bindings: Add vendor prefix for Avnet, Inc. dt-bindings: Relocate Tegra20 memory controller bindings dt-bindings: Add "sifive" vendor prefix dt-bindings: exynos: move ADC binding to iio/adc/ directory dt-bindings: powerpc/4xx: move 4xx NDFC and EMAC bindings to subsystem directories dt-bindings: move various RNG bindings to rng/ directory dt-bindings: move various timer bindings to timer/ directory ... |
||
|
Linus Torvalds
|
1c8c5a9d38 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
1) Add Maglev hashing scheduler to IPVS, from Inju Song.
2) Lots of new TC subsystem tests from Roman Mashak.
3) Add TCP zero copy receive and fix delayed acks and autotuning with
SO_RCVLOWAT, from Eric Dumazet.
4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
Brouer.
5) Add ttl inherit support to vxlan, from Hangbin Liu.
6) Properly separate ipv6 routes into their logically independant
components. fib6_info for the routing table, and fib6_nh for sets of
nexthops, which thus can be shared. From David Ahern.
7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
messages from XDP programs. From Nikita V. Shirokov.
8) Lots of long overdue cleanups to the r8169 driver, from Heiner
Kallweit.
9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.
10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.
11) Plumb extack down into fib_rules, from Roopa Prabhu.
12) Add Flower classifier offload support to igb, from Vinicius Costa
Gomes.
13) Add UDP GSO support, from Willem de Bruijn.
14) Add documentation for eBPF helpers, from Quentin Monnet.
15) Add TLS tx offload to mlx5, from Ilya Lesokhin.
16) Allow applications to be given the number of bytes available to read
on a socket via a control message returned from recvmsg(), from
Soheil Hassas Yeganeh.
17) Add x86_32 eBPF JIT compiler, from Wang YanQing.
18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
From Björn Töpel.
19) Remove indirect load support from all of the BPF JITs and handle
these operations in the verifier by translating them into native BPF
instead. From Daniel Borkmann.
20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.
21) Allow XDP programs to do lookups in the main kernel routing tables
for forwarding. From David Ahern.
22) Allow drivers to store hardware state into an ELF section of kernel
dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.
23) Various RACK and loss detection improvements in TCP, from Yuchung
Cheng.
24) Add TCP SACK compression, from Eric Dumazet.
25) Add User Mode Helper support and basic bpfilter infrastructure, from
Alexei Starovoitov.
26) Support ports and protocol values in RTM_GETROUTE, from Roopa
Prabhu.
27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
Brouer.
28) Add lots of forwarding selftests, from Petr Machata.
29) Add generic network device failover driver, from Sridhar Samudrala.
* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
strparser: Add __strp_unpause and use it in ktls.
rxrpc: Fix terminal retransmission connection ID to include the channel
net: hns3: Optimize PF CMDQ interrupt switching process
net: hns3: Fix for VF mailbox receiving unknown message
net: hns3: Fix for VF mailbox cannot receiving PF response
bnx2x: use the right constant
Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
enic: fix UDP rss bits
netdev-FAQ: clarify DaveM's position for stable backports
rtnetlink: validate attributes in do_setlink()
mlxsw: Add extack messages for port_{un, }split failures
netdevsim: Add extack error message for devlink reload
devlink: Add extack to reload and port_{un, }split operations
net: metrics: add proper netlink validation
ipmr: fix error path when ipmr_new_table fails
ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
net: hns3: remove unused hclgevf_cfg_func_mta_filter
netfilter: provide udp*_lib_lookup for nf_tproxy
qed*: Utilize FW 8.37.2.0
...
|
||
|
Christophe Roullier
|
1f809b47e5 |
dt-bindings: stm32: add compatible for syscon
This patch describes syscon DT bindings. Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Olof Johansson
|
521ec1ca75 |
Renesas ARM Based SoC DT Bindings Updates for v4.18
Document bindings for: * V3H Starter Kit, a board used with the R-Car V3H (r8a77980) SoC * R-Car E3 (R8A77990) SoC and its Ebisu board * iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S) which uses an RZ/G1C (R8A77470) SoC * RZ/G1M (R8A7743) and RZ/G1N (R8A7744) CMT support Cleanup: * Consistently name r8a77965 as R-Car M3-N -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlr9SpsACgkQ189kaWo3 T76Y3A//XMYlYJsCXx3P9Z5U7jF9VUuwhf1jrDTWfgeTVgJng8rvL+tNU1r0o3lR UHZuITPhMRnCXAPj8ZY5zImIYE8YTcN9qwEFKCqtUxo9auOmYLK0V5rcK07hrXTC leTuPRsFAu8lodTwoIC6JT9EWux7XDjcQDOKemat3fGLlLThuZd8MkWVjnoX1NNa 0WKESjS/XsiF9MykMaAcW+CBZGo1HJDtUxzSWsczgTl3mUlU4BV3UZm8bY2WXZX9 cF74tIJj5yqeDEB0PKjlJeuTJDMerR4gOa8pe9tAmaAEkzRsNDvqWMYK2nybkPcG 9Ree59oKpkObQrznFMzYzyz65Agj3dNybihZDvypgLmH5mbhQtkQWXUPcuZr8jha pv8gW3Q9xs3U4WPOTizsQ8zYNMDQWjsCpPhbAMn8CXgZO9PV5EWla4JA3pxr1LWL /WcUnoyxqpoaNUTGAS/pRxFBYFzCe96NTOku0UPHCYObdfXfxgTsu1TOis3Vwqh3 h3s8iy1nhpVpojcGQD/txtkpsUqc/NHVylC86aHZzwV3bdCILmKvuNnT/XKGUfkS HFLPl5xFSkVnYzYe/iS+54CDjJbk1ioRfS/dDf8+IC8pHvqKMmreWIztGJmIiUlv Kgtbwvboe9CPMKDY+NwcG+yAcNbRXCBZL7dPOjBSjdTaidVEgoE= =xUdq -----END PGP SIGNATURE----- Merge tag 'renesas-dt-bindings-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Renesas ARM Based SoC DT Bindings Updates for v4.18 Document bindings for: * V3H Starter Kit, a board used with the R-Car V3H (r8a77980) SoC * R-Car E3 (R8A77990) SoC and its Ebisu board * iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S) which uses an RZ/G1C (R8A77470) SoC * RZ/G1M (R8A7743) and RZ/G1N (R8A7744) CMT support Cleanup: * Consistently name r8a77965 as R-Car M3-N * tag 'renesas-dt-bindings-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: dt-bindings: arm: document Renesas V3HSK board bindings dt-bindings: timer: renesas, cmt: Document r8a774[35] CMT support dt-bindings: arm: consistently name r8a77965 as M3-N dt-bindings: arm: Document Renesas Ebisu board DT bindings dt-bindings: arm: Document R-Car E3 SoC DT bindings dt-bindings: arm: Document iW-RainboW-G23S single board computer Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
d5e72aa1a5 |
dt-bindings: tegra: Changes for v4.18-rc1
This contains the device tree bindings updates for the memory controller hot resets that are implemented by driver patches in a different branch. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlr+4K8THHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zoVwjD/9mOdulH1hTxq3Kb84OX6R2YSABmU9M 34//hcMsY7xFhW++Q/UD8hdDdutwzoIjn0/UUGDfjLiKieMwIxXq6OYzkVKqyXqL 6H2id7uOYDruC4tTJ2q4zdFhWlPV7BKqOH/yhq+bcv13muYQP1ymPW7miPa9DZbm 09rrtR9Y66VizLEl+NjdatzGjzpPIHnOrEpZmvpWr3OSJ4WDeDusuvQH7A3M4CKT ClXz9dmHX9opCJQgFKCHBzSvyB6TJ87FlEBaS+ULKd7Cg1yi9Soq1Tipv4415J0N KqOj2sIZEVFrqKKj9LKMLvkc9WHVK0Vwbivq/NAYlMjvzlxYcLBvPqjEdV9PKJOG nldiPhpNCcKW69N3X55MfzIVRi/TvzfXHw1f8dTw1XeWxptDlYnheU3VNXMUKKfX matb2hKi71Ykl9acb2HkGVoPrhElbd8CJz0GWlFApkenUZz8QpMLokqWcQnnjjND wuHuZyuybihek0PM9QmHkXEstvqY457AVy5r4uh8yG13Obp8iSieJc/ROkuCqoMo YDqvmgCqi9g4T7P/hIp814lsO2clbiQWTwop417kWlHY2nmnVzZLJI4/rVf8xIDp DYLmCZ4cUYKDo/RpHRlU7RFKIfiTeace/K7jFw/F24jLHlsG42IvrtC9NterBmFf S0Bs7v5l0lG0Cg== =Ua3m -----END PGP SIGNATURE----- Merge tag 'tegra-for-4.18-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt dt-bindings: tegra: Changes for v4.18-rc1 This contains the device tree bindings updates for the memory controller hot resets that are implemented by driver patches in a different branch. * tag 'tegra-for-4.18-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: Relocate Tegra20 memory controller bindings dt-bindings: arm: tegra: Document #reset-cells property of the Tegra20 MC dt-bindings: memory: tegra: Document #reset-cells property of the Tegra30 MC dt-bindings: arm: tegra: Remove duplicated Tegra30+ MC binding Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
c1835bfdef |
Amlogic 64-bit DT updates for v4.18
- AXG family: support more peripherals (wifi, eMMC, clocks) - GX family: add/enable USB host support -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAlr7XJUACgkQWTcYmtP7 xmV6tRAAp+tlG3OiuKXraOeOJZDW9nqQbwCgH8tLl4feayOfIM0OEq1Xz2GbRM42 XZxa5mIifebtE6Is8ow33+O6Sm1G9MjRPzsEE0IVpK3X7pGu767xmMs1HiWe7ovU 9melof4TZBJzsD4WKA29ByU8Hhtt65/BWQOEdRciqhVdEUJ5pxyEdvrSa8zYIaWc brLr8P3oAA2lTO4Vmd1yEnxrhxVqLYBEQYojFEc7iRAVeTgCYCrYZE7diY20l6JZ vsJGK/K1goUuITnxeHnWWF3tAwLQcUb6SkH4tYk/m7sOJeFM3j2gqcXqqEUjjNOH AEn+vDFB7OmIIAJaJAPw5nTYIriTQGDGFmNZaBSlQXQGFi3FPZI//uupmeV/qUAB uonGJtAw90g8onhkjvg3fubd3UV1xNtgCSWhorZ5UN9ouCPKeFVvdU15cImdx/cC aR7K+X74kcr/ByChXAupJT1/1GtgHd8ol8WqKJHwZy2csllLyq9wzar73ytZA1Dz 3leLZxo07IkuhPxnBdjC/Kh63hqq1H01tmNmoUlQqOh2sngByeXsxhYyi1fTD9ui FPR4IGmgVL2aIpEXgzIn4VCTWAhPDV5a80gTIdyVhPzRSbvI1aPTQkFsvHyafalw 3fL5aKjOKNgSggLX+Qth9+LBnHUgsa5aNj/MQV9aK+99OML4Ffw= =7skA -----END PGP SIGNATURE----- Merge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Amlogic 64-bit DT updates for v4.18 - AXG family: support more peripherals (wifi, eMMC, clocks) - GX family: add/enable USB host support * tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: dt-bindings: arm: amlogic: add support for the Tronsmart MXIII Plus dt-bindings: arm: amlogic: add support for the Meson8m2 SoC ARM64: dts: meson-axg: enable AP6255 wifi module ARM64: dts: meson: add MMC resets ARM64: dts: meson-axg: add an 32K alt aoclk ARM64: dts: meson-axg: add tdm pins ARM64: dts: meson-axg: add GPIO interrupt controller support ARM64: dts: meson-axg: enable the eMMC controller ARM64: dts: meson-gx: fix gxl clock controller compatible ARM64: dts: meson-axg: use hhi syscon for the clock controller ARM64: dts: meson-gx: sysctrl is the parent of the clock controller dt-bindings: clock: meson: update documentation with hhi syscon Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Sean Wang
|
47b65a4a74 |
dt-bindings: clock: mediatek: add g3dsys bindings
Add bindings to g3dsys providing necessary clock and reset control to Mali-450. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Sergei Shtylyov
|
c92db4a4a4 |
dt-bindings: arm: document Renesas V3HSK board bindings
Document the V3H Starter Kit device tree bindings, listing it as a supported board. This allows to use checkpatch.pl to validate .dts files referring to the V3HSK board. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
|
Olof Johansson
|
e1b4a36939 |
Samsung DTS ARM changes for v4.18
1. Add support for USB OTG port on Origen board. 2. Allow earlycon on Rinato board. 3. Cleanup from obsolete properties. 4. Fix DTC warnings. 5. Remove Exynos5440 entirely. 6. Add mem-2-mem Scaler devices. -----BEGIN PGP SIGNATURE----- iQItBAABCAAXBQJa+FqwEBxrcnprQGtlcm5lbC5vcmcACgkQwTdm5oaLg9fzag/+ LI/SzSw0kv0xwDWHvjfeYTGtiiiLTTINIkhiIWzIf7lYn250PLspJfBgUOQfIe9B CcqA2IhAW4eDkLpoNw2WXbjrocQn2Wxo1uvwHD7bRcUpcnN/XfE+vjy0GFYGgPFe iBvbjShTLJqqKtfHndhboGjyIMcKasM3FnB29YwUJzRkDcPMmV3oYt+tL11hycAo VNbr9QP2NVuNujufByTVH635LtQZJj5Gm8+VtCaH+AMfTLzNaxXP5bgmfb0iW4kQ pC3DONB3qbNqPDTIxz33DR5L0RLullV15AQv3BZmKkOB8KdPnhAs26KWh4/VdPow EvuIuLoTQMJ/PfDVWQsNGseA5dbW38UXBzBvWlYKBSoMGzVvUVGKGyY+8D23L8Aw 1t9qFQ954wxufuEQQxpA0PMxEpotbSQ2nfgCUUhA/EsqpvbyNQCfyH1jHk2SfkUR /vJ3hhK8I6or5/k79wrkaAaayWHgdMnXeIjugTT2TmopevkoO18ZVLroJL1nARVc Yz7pk7rlJZEQ+edsgR9a0rRjmixZN6MJMDangyE8uu3YRGk92JOuzdqNYZM/mSfy 1djN5ks7wi0WE4ya7i4QujpxpFJ05vqTcKxfHoltevTgZl2jwYZWKA2j2dZPTSot aZwbUCeHFqoyV28eo9IkHGIeAG0ut6Pg859jFz4Z5QM= =1XLN -----END PGP SIGNATURE----- Merge tag 'samsung-dt-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Samsung DTS ARM changes for v4.18 1. Add support for USB OTG port on Origen board. 2. Allow earlycon on Rinato board. 3. Cleanup from obsolete properties. 4. Fix DTC warnings. 5. Remove Exynos5440 entirely. 6. Add mem-2-mem Scaler devices. * tag 'samsung-dt-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Update x and y properties for mms114 touchscreen ARM: dts: exynos: Add mem-2-mem Scaler devices ARM: dts: s3c64xx: Remove skeleton.dtsi and fix DTC warnings for /memory ARM: dts: s3c24xx: Fix unnecessary address/size cells DTC warnings ARM: dts: s3c24xx: Remove skeleton.dtsi and fix DTC warning for /memory ARM: dts: exynos/s3c: Remove leading 0x and 0s from bindings notation ARM: dts: exynos: Remove Exynos5440 ARM: dts: exynos: Remove unnecessary address/size properties in dp-controller of Exynos5 ARM: dts: exynos: Bring order in fixed-regulators naming in Midas boards ARM: dts: exynos: Remove regulators node container in Origen and N710x ARM: dts: exynos: Remove unnecessary address/size properties in Origen ARM: dts: exynos: Remove unnecessary address/size properties in Midas boards ARM: dts: exynos: Fix invalid node referenced by i2c20 alias in Peach Pit and Pi ARM: dts: exynos: Move syscon poweroff and restart nodes under the PMU ARM: dts: exynos: Remove obsolete clock properties from power domains ARM: dts: exynos: Add serial path for Rinato board to get earlycon support ARM: dts: exynos: Add support for USB OTG port on Origen board Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Thor Thayer
|
f8eb0edeb8 |
Documentation: dt: edac: Move Altera SOCFPGA EDAC file
Move the Altera SOCFPGA EDAC file from bindings/arm/altera to bindings/edac. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Requested-by: Rob Herring <robh@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1525203036-21774-1-git-send-email-thor.thayer@linux.intel.com Signed-off-by: Borislav Petkov <bp@suse.de> |
||
|
Thor Thayer
|
c7229b60eb |
Documentation: dt: socfpga: Add Stratix10 ECC Manager binding
Add the device tree bindings needed to support the Stratix10 ECC Manager and SDRAM ECC. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: catalin.marinas@arm.com Cc: devicetree@vger.kernel.org Cc: dinguyen@kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: mchehab@kernel.org Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1524854238-19394-2-git-send-email-thor.thayer@linux.intel.com Signed-off-by: Borislav Petkov <bp@suse.de> |
||
|
Martin Blumenstingl
|
c51fb2d458 |
dt-bindings: arm: amlogic: add support for the Tronsmart MXIII Plus
Add the binding documentation for the Tronsmart MXIII Plus which is an Android TV box using the Amlogic S812 (Meson8m2) SoC. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com> |
||
|
Martin Blumenstingl
|
cfecb21109 |
dt-bindings: arm: amlogic: add support for the Meson8m2 SoC
The Meson8m2 SoC is an updated version of the Meson8 SoC. Some of the peripherals are updated to be register-compatible with Meson8b. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com> |
||
|
Krzysztof Kozlowski
|
8c83315da1 |
ARM: dts: exynos: Remove Exynos5440
The Exynos5440 (quad-core A15 with GMAC, PCIe, SATA) was targeting server platforms but it did not make it to the market really. There are no development boards with it and probably there are no real products neither. The development for Exynos5440 ended in 2013 and since then the platform is in maintenance mode. Remove all Device Tree sources for Exynos5440, as first step of removal of the platform to simplify the code and drivers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andi Shyti <andi@etezian.org> Reviewed-by: Rob Herring <robh@kernel.org> |
||
|
Simon Horman
|
519df0e05d |
dt-bindings: arm: consistently name r8a77965 as M3-N
There is an inconsistency between the use of M3N and M3-N. This patch resolves this by consistently using the latter. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Rob Herring <robh@kernel.org> |
||
|
Thierry Reding
|
ed0d3a6af5 |
dt-bindings: Relocate Tegra20 memory controller bindings
Move the device tree bindings for the Tegra20 memory controller to the same location as the Tegra30 (and later) memory controller bindings. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Rob Herring
|
f6c207aeba |
dt-bindings: exynos: move ADC binding to iio/adc/ directory
Bindings are supposed to be organized by device class/function. Move the binding for Exynos ADC to the iio/adc/ binding directory. Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Rob Herring
|
2359ccddc1 |
dt-bindings: move various timer bindings to timer/ directory
Bindings are supposed to be organized by device class/function. Move bindings for various timers to timer/ binding directory. Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Thierry Reding
|
eb8f53b6d3 |
dt-bindings: Relocate Tegra20 memory controller bindings
Move the device tree bindings for the Tegra20 memory controller to the same location as the Tegra30 (and later) memory controller bindings. Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
|
Dmitry Osipenko
|
60eb8eff54 |
dt-bindings: arm: tegra: Document #reset-cells property of the Tegra20 MC
Memory Controller has a memory client "hot reset" functionality, which resets the DMA interface of a memory client, so MC is a reset controller. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
|
Dmitry Osipenko
|
cce5819ba3 |
dt-bindings: arm: tegra: Remove duplicated Tegra30+ MC binding
There are two bindings for the same Memory Controller. One of the bindings became obsolete long time ago and probably was left unnoticed, remove it for consistency. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
|
Stefan Wahren
|
9db90175e0 |
dt-bindings: bcm: Add Raspberry Pi 3 B+
This adds the root properties for the Raspberry Pi 3 B+ Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Eric Anholt <eric@anholt.net> |
||
|
Yoshihiro Shimoda
|
d2ba004b03 |
dt-bindings: arm: Document Renesas Ebisu board DT bindings
This patch adds device tree bindings documentation for Renesas Ebisu board (RTP0RC77990SEB0010S). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
|
Yoshihiro Shimoda
|
6fdc4f90b4 |
dt-bindings: arm: Document R-Car E3 SoC DT bindings
This patch adds device tree bindings documentation for Renesas R-Car E3 (r8a77990). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
|
Biju Das
|
7625f03be3 |
dt-bindings: arm: Document iW-RainboW-G23S single board computer
Document the iW-RainboW-G23S single board computer device tree bindings, listing it as a supported board. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
|
Biju Das
|
0c1d543b75 |
ARM: shmobile: r8a77470: basic SoC support
Add minimal support for the RZ/G1C (R8A77470) SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
|
Linus Torvalds
|
ca4e7c5120 |
The large diff this time around is from the addition of a new clk driver
for the TI Davinci family of SoCs. So far those clks have been supported with a custom implementation of the clk API in the arch port instead of in the CCF. With this driver merged we're one step closer to having a single clk API implementation. The other large diff is from the Amlogic clk driver that underwent some major surgery to use regmap. Beyond that, the biggest hitter is Samsung which needed some reworks to properly handle clk provider power domains and a bunch of PLL rate updates. The core framework was fairly quiet this round, just getting some cleanups and small fixes for some of the more esoteric features. And the usual set of driver non-critical fixes, cleanups, and minor additions are here as well. Core: - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops - debugfs ops macroized to shave some lines of boilerplate code - Always calculate the phase instead of caching it in clk_get_phase() - More __must_check on bulk clk APIs New Drivers: - TI's Davinci family of SoCs - Intel's Stratix10 SoC - stm32mp157 SoC - Allwinner H6 CCU - Silicon Labs SI544 clock generator chip - Renesas R-Car M3-N and V3H SoCs - i.MX6SLL SoCs Removed Drivers: - ST-Ericsson AB8540/9540 Updates: - Mediatek MT2701 and MT7622 audsys support and MT2712 updates - STM32F469 DSI and STM32F769 sdmmc2 support - GPIO clks can sleep now - Spreadtrum SC9860 RTC clks - Nvidia Tegra MBIST workarounds and various minor fixes - Rockchip phase handling fixes and a memory leak plugged - Renesas drivers switch to readl/writel from clk_readl/clk_writel - Renesas gained CPU (Z/Z2) and watchdog support - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support - Qualcomm PM8921 PMIC XO buffers - Amlogic migrates to regmap APIs - TI Keystone clk latching support - Allwinner H3 and H5 video clk fixes - Broadcom BCM2835 PLLs needed another bit to enable - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix - i.MX6UL/ULL epdc_podf support - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlrPhMARHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSVkkxAArsItSoxQV18kQlJ9S7o2z75giquXQfvy Y/cKIIY1kz4K+qm+rpbl6PjukrSPtfM+wGmepGt+CptOdlj672viFxI7zjrd1iSy /xJo7d5/nZxvmx0qcwYWVTCOsU+4FUUkpq5mE91KEvwny/qgRqEgWeLoWTDLBktF MzGtBUYudjkRYLd2I31DGB3dqI0Dy9JwuEpJfCAt5h4dztml3aNjYknjQ/vUSEXL 61mSYM1fwzK8rnrjSlQqb+X0OoJ6d5Pz2uHRXnWfGlS8UOh5N9NFGKpiErLm+h/+ /FigA6f9HBeUneNf5Dnu568FHwE2FyUbZKVd40OYj3x128OnAoKUoRt68/8FQPdf NoQb3zH3Ha1JbwWgvQ9RkWp82kYnMctrlkh6IFye/FxdfwCWA4SE/iIgJXRJbQ/K blZz14jkXT8oISqy6nryGv3CK/RFXzVdvVa4z41xHc4cnLpNBsv1o89a+9MyTvMD wYOnc/98/l5xYs5PvQqNrd/onE0GLIeOEtkWNXH0OACe6FOIuz5eVn4Uh8aIm0wl +EHwHRwB7AQK+a7jwEfQ88aceAntvFlymUUcsncyCXn2s0knc5BHJPSHhoZk1tJb Wv2Fcln3Mwjhhq9aoNxfAJf4pIqmFgdQEtwyND4GJlP55Xay5QMZVEdwnNfFDvmf X6P2pfkBqkg= =ys4O -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The large diff this time around is from the addition of a new clk driver for the TI Davinci family of SoCs. So far those clks have been supported with a custom implementation of the clk API in the arch port instead of in the CCF. With this driver merged we're one step closer to having a single clk API implementation. The other large diff is from the Amlogic clk driver that underwent some major surgery to use regmap. Beyond that, the biggest hitter is Samsung which needed some reworks to properly handle clk provider power domains and a bunch of PLL rate updates. The core framework was fairly quiet this round, just getting some cleanups and small fixes for some of the more esoteric features. And the usual set of driver non-critical fixes, cleanups, and minor additions are here as well. Core: - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops - debugfs ops macroized to shave some lines of boilerplate code - Always calculate the phase instead of caching it in clk_get_phase() - More __must_check on bulk clk APIs New Drivers: - TI's Davinci family of SoCs - Intel's Stratix10 SoC - stm32mp157 SoC - Allwinner H6 CCU - Silicon Labs SI544 clock generator chip - Renesas R-Car M3-N and V3H SoCs - i.MX6SLL SoCs Removed Drivers: - ST-Ericsson AB8540/9540 Updates: - Mediatek MT2701 and MT7622 audsys support and MT2712 updates - STM32F469 DSI and STM32F769 sdmmc2 support - GPIO clks can sleep now - Spreadtrum SC9860 RTC clks - Nvidia Tegra MBIST workarounds and various minor fixes - Rockchip phase handling fixes and a memory leak plugged - Renesas drivers switch to readl/writel from clk_readl/clk_writel - Renesas gained CPU (Z/Z2) and watchdog support - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support - Qualcomm PM8921 PMIC XO buffers - Amlogic migrates to regmap APIs - TI Keystone clk latching support - Allwinner H3 and H5 video clk fixes - Broadcom BCM2835 PLLs needed another bit to enable - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix - i.MX6UL/ULL epdc_podf support - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (233 commits) clk: davinci: add a reset lookup table for psc0 clk: imx: add clock driver for imx6sll dt-bindings: imx: update clock doc for imx6sll clk: imx: add new gate/gate2 wrapper funtion clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux clk: cs2000: set pm_ops in hibernate-compatible way clk: bcm2835: De-assert/assert PLL reset signal when appropriate clk: imx7d: Move clks_init_on before any clock operations clk: imx7d: Correct ahb clk parent select clk: imx7d: Correct dram pll type clk: imx7d: Add USB clock information clk: socfpga: stratix10: add clock driver for Stratix10 platform dt-bindings: documentation: add clock bindings information for Stratix10 clk: ti: fix flag space conflict with clkctrl clocks clk: uniphier: add additional ethernet clock lines for Pro4 clk: uniphier: add SATA clock control support clk: uniphier: add PCIe clock control support clk: Add driver for the si544 clock generator chip clk: davinci: Remove redundant dev_err calls clk: uniphier: add ethernet clock control support for PXs3 ... |
||
|
Linus Torvalds
|
3c0d551e02 |
pci-v4.17-changes
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlrHeY8UHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vxhLRAAndV/0NDyWZU0eZNM6twri2SEFnF7 E4ar+YthxDxxJG4TLJbIA12jc5NgHZy4WuttDa6Jb99KreBXIHJFlNi/V/tme6zf +yXUuxWae7wJzBiaay57VqLGSc80gt/LTgjLa1siwQqjTbO3wSXR6JJXNaE9FtQ4 /jL61t8bD1Peb5cWTpt9p0hrnKI0/pHwASdReyFS4F/HDKdvpof7BxE/OU3HSxxA XKC2v6RjY4S93vkzvApDXQ+vhKquVRK7/ojyTXQUO/GIzcARprO7H4k62N4ar0x/ qbXLkR8IMkwA8ecsNmcL92ftb/cXoHfd+wdK8WpijqzF4kW4SdteVWbIhUzI0gbr 0gjDYIzjplvH3pZGv/qvx+8sFtAP95OdPjuAAW2qJ9TCVfmiS8naNFCvcxg87RhD gjyQD3If1X7F8wy309lhq7VNyRexTHgIMgTXHyFvuZMzn/Qe1huL2XCwDcEAg/OX AvU2iuSE5tWAh7gIUMF/aWi3uoeJUyyoru5ZR//gqdFfx9YxpSimO1UDXnpPi8SR Iz/jzHJc0aWGYdQ9l6HiSbJF3P/QQcWYs9igt0A7BRGB05SPdWCh7sSO70FJa8ME f4WID5/qEiaH26kiSRX4cUqpc8Amk8bT0DXw2OT57qy3JM0ZdV5ENQX11pSpr9hv uLEf0DU7AEmdvzQ= =T++R -----END PGP SIGNATURE----- Merge tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - move pci_uevent_ers() out of pci.h (Michael Ellerman) - skip ASPM common clock warning if BIOS already configured it (Sinan Kaya) - fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva) - remove last user of pci_get_bus_and_slot() and the function itself (Sinan Kaya) - add decoding for 16 GT/s link speed (Jay Fang) - add interfaces to get max link speed and width (Tal Gilboa) - add pcie_bandwidth_capable() to compute max supported link bandwidth (Tal Gilboa) - add pcie_bandwidth_available() to compute bandwidth available to device (Tal Gilboa) - add pcie_print_link_status() to log link speed and whether it's limited (Tal Gilboa) - use PCI core interfaces to report when device performance may be limited by its slot instead of doing it in each driver (Tal Gilboa) - fix possible cpqphp NULL pointer dereference (Shawn Lin) - rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI hotplug (Mika Westerberg) - add support for PCI I/O port space that's neither directly accessible via CPU in/out instructions nor directly mapped into CPU physical memory space. This is fairly intrusive and includes minor changes to interfaces used for I/O space on most platforms (Zhichang Yuan, John Garry) - add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan, John Garry) - use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas) - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr() (Shawn Lin) - report quirk timings with dev_info (Bjorn Helgaas) - report quirks that take longer than 10ms (Bjorn Helgaas) - add and use Altera Vendor ID (Johannes Thumshirn) - tidy Makefiles and comments (Bjorn Helgaas) - don't set up INTx if MSI or MSI-X is enabled to align cris, frv, ia64, and mn10300 with x86 (Bjorn Helgaas) - move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) - use generic pci_mmap_resource_range() instead of powerpc and xtensa arch-specific versions (David Woodhouse) - support arbitrary PCI host bridge offsets on sparc (Yinghai Lu) - remove System and Video ROM reservations on sparc (Bjorn Helgaas) - probe for device reset support during enumeration instead of runtime (Bjorn Helgaas) - add ACS quirk for Ampere (née APM) root ports (Feng Kan) - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas Vincent-Cross) - protect device restore with device lock (Sinan Kaya) - handle failure of FLR gracefully (Sinan Kaya) - handle CRS (config retry status) after device resets (Sinan Kaya) - skip various config reads for SR-IOV VFs as an optimization (KarimAllah Ahmed) - consolidate VPD code in vpd.c (Bjorn Helgaas) - add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann) - add DT support for R-Car r8a7743 (Biju Das) - fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host bridge driver that causes a general protection fault (Dexuan Cui) - fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV (Dexuan Cui) - fix Hyper-V host bridge hang when ejecting a VF before setting up MSI (Dexuan Cui) - make several structures static (Fengguang Wu) - increase number of MSI IRQs supported by Synopsys DesignWare bridges from 32 to 256 (Gustavo Pimentel) - implemented multiplexed IRQ domain API and remove obsolete MSI IRQ API from DesignWare drivers (Gustavo Pimentel) - add Tegra power management support (Manikanta Maddireddy) - add Tegra loadable module support (Manikanta Maddireddy) - handle 64-bit BARs correctly in endpoint support (Niklas Cassel) - support optional regulator for HiSilicon STB (Shawn Guo) - use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla) - support power supplies for Qualcomm msm8996 (Srinivas Kandagatla) * tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits) MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver HISI LPC: Add ACPI support ACPI / scan: Do not enumerate Indirect IO host children ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings of: Add missing I/O range exception for indirect-IO devices PCI: Apply the new generic I/O management on PCI IO hosts PCI: Add fwnode handler as input param of pci_register_io_range() PCI: Remove __weak tag from pci_register_io_range() MAINTAINERS: Add missing /drivers/pci/cadence directory entry fm10k: Report PCIe link properties with pcie_print_link_status() net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth net/mlx5: Report PCIe link properties with pcie_print_link_status() net/mlx4_core: Report PCIe link properties with pcie_print_link_status() PCI: Add pcie_print_link_status() to log link speed and whether it's limited PCI: Add pcie_bandwidth_available() to compute bandwidth available to device misc: pci_endpoint_test: Handle 64-bit BARs properly PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar ... |
||
|
Linus Torvalds
|
38c23685b2 |
ARM: SoC driver updates for 4.17
The main addition this time around is the new ARM "SCMI" framework,
which is the latest in a series of standards coming from ARM to do power
management in a platform independent way. This has been through many
review cycles, and it relies on a rather interesting way of using the
mailbox subsystem, but in the end I agreed that Sudeep's version was
the best we could do after all.
Other changes include:
- the ARM CCN driver is moved out of drivers/bus into drivers/perf,
which makes more sense. Similarly, the performance monitoring
portion of the CCI driver are moved the same way and cleaned up
a little more.
- a series of updates to the SCPI framework
- support for the Mediatek mt7623a SoC in drivers/soc
- support for additional NVIDIA Tegra hardware in drivers/soc
- a new reset driver for Socionext Uniphier
- lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and
drivers/firmware and drivers/reset across platforms
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Pmsx
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The main addition this time around is the new ARM "SCMI" framework,
which is the latest in a series of standards coming from ARM to do
power management in a platform independent way.
This has been through many review cycles, and it relies on a rather
interesting way of using the mailbox subsystem, but in the end I
agreed that Sudeep's version was the best we could do after all.
Other changes include:
- the ARM CCN driver is moved out of drivers/bus into drivers/perf,
which makes more sense. Similarly, the performance monitoring
portion of the CCI driver are moved the same way and cleaned up a
little more.
- a series of updates to the SCPI framework
- support for the Mediatek mt7623a SoC in drivers/soc
- support for additional NVIDIA Tegra hardware in drivers/soc
- a new reset driver for Socionext Uniphier
- lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and
drivers/firmware and drivers/reset across platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits)
reset: uniphier: add ethernet reset control support for PXs3
reset: stm32mp1: Enable stm32mp1 reset driver
dt-bindings: reset: add STM32MP1 resets
reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset control
reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency
reset: modify the way reset lookup works for board files
reset: add support for non-DT systems
clk: scmi: use devm_of_clk_add_hw_provider() API and drop scmi_clocks_remove
firmware: arm_scmi: prevent accessing rate_discrete uninitialized
hwmon: (scmi) return -EINVAL when sensor information is unavailable
amlogic: meson-gx-socinfo: Update soc ids
soc/tegra: pmc: Use the new reset APIs to manage reset controllers
soc: mediatek: update power domain data of MT2712
dt-bindings: soc: update MT2712 power dt-bindings
cpufreq: scmi: add thermal dependency
soc: mediatek: fix the mistaken pointer accessed when subdomains are added
soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC
soc: mediatek: avoid hardcoded value with bus_prot_mask
dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding
dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC
...
|
||
|
Linus Torvalds
|
167569343f |
ARM: SoC platform updates for 4.17
This release brings up a new platform based on the old ARM9 core: the Nuvoton NPCM is used as a baseboard management controller, competing with the better known ASpeed AST2xx series. Another important change is the addition of ARMv7-A based chips in mach-stm32. The older parts in this platform are ARMv7-M based microcontrollers, now they are expanding to general-purpose workloads. The other changes are the usual defconfig updates to enable additional drivers, lesser bugfixes. The largest updates as often are the ongoing OMAP cleanups, but we also have a number of changes for the older PXA and davinci platforms this time. For the Renesas shmobile/r-car platform, some new infrastructure is needed to make the watchdog work correctly. Supporting Multiprocessing on Allwinner A80 required a significant amount of new code, but is not doing anything unexpected. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJaxibSAAoJEGCrR//JCVInPwcP/2ZdLMXXXaJBM+rCRPhT+vR1 FsKqcTCC5RHbVcKW+N54nmlsqofy2GadlmyfOdrFXtbf+Sm2dRNsDrHDOhvoPp37 fwBd0wGw0PLjNE8SEPp/ldtFe11Dbg0WGBzJ4PAPJgt1W4hvW8//VzVW1XsiRrVc 9SlZ66DwR95UQ5pwy+dfE8f9A/WW4XaMq0UHQ3/deQ/Te/64b/C6CJtT3W73WAlR 83UHgkwq3WvI+hhvg4QX9H0Q6dcK2JLUWsAB0xnZP8Q8t30NdDpl61uZL0A4Mh9Y 38lPhUjPUyUpsGrOttmMEQNzbAk4m/nzQxByYYmhkx3x+mlhjdA9KNavxDYVxXN2 1tzz62wst8pLePqVt2UsFqsaruJGMuTIooOdc5iCjG1c2N2kQGdBsuOvLjYu9kV6 XPTfvvAYkMo9rC0MbdPuobG+h/WrYHuc9SD2Mnt+kNaw1yJL08fWENjSuwP7kheb 2A5jdAFNrGqgcrWMsQOw8eYYC7z7WojkLq0kHrBbwIlVD7KIZurv2fm/iVo4+xPH Gig5HuehMUtVYAf+Q1KWFlqS01fXMErt2pDGI5f1mNumXCB5kdWoSKbU8lOg03f8 ZqBHlfly+QDMOx0qfkxFX+phHPWHTOC+45yHK2Xq+n9urXmQbzYZxTzq5zCu6jcm 4yH0jaykoHODGNLIt50f =HD9V -----END PGP SIGNATURE----- Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "This release brings up a new platform based on the old ARM9 core: the Nuvoton NPCM is used as a baseboard management controller, competing with the better known ASpeed AST2xx series. Another important change is the addition of ARMv7-A based chips in mach-stm32. The older parts in this platform are ARMv7-M based microcontrollers, now they are expanding to general-purpose workloads. The other changes are the usual defconfig updates to enable additional drivers, lesser bugfixes. The largest updates as often are the ongoing OMAP cleanups, but we also have a number of changes for the older PXA and davinci platforms this time. For the Renesas shmobile/r-car platform, some new infrastructure is needed to make the watchdog work correctly. Supporting Multiprocessing on Allwinner A80 required a significant amount of new code, but is not doing anything unexpected" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits) arm: npcm: modify configuration for the NPCM7xx BMC. MAINTAINERS: update entry for ARM/berlin ARM: omap2: fix am43xx build without L2X0 ARM: davinci: da8xx: simplify CFGCHIP regmap_config ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data ARM: multi_v7_defconfig: add NXP FlexCAN IP support ARM: multi_v7_defconfig: enable thermal driver for i.MX devices ARM: multi_v7_defconfig: add RN5T618 PMIC family support ARM: multi_v7_defconfig: add NXP graphics drivers ARM: multi_v7_defconfig: add GPMI NAND controller support ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs ARM: multi_v7_defconfig: configure I2C driver built-in arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE ARM: imx: fix imx6sll-only build ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well ARM: mxs_defconfig: Re-sync defconfig ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver ARM: imx_v4_v5_defconfig: Re-sync defconfig arm64: defconfig: enable stmmac ethernet to defconfig ARM: EXYNOS: Simplify code in coupled CPU idle hot path ... |
||
|
Linus Torvalds
|
b240b419db |
ARM: SoC device tree updates for 4.17
This is the usual set of changes for device trees, with over 700
non-merged changesets. There is an ongoing set of dtc warning fixes and
the usual bugfixes, cleanups and added device support.
The most interesting bit as usual is support for new machines listed
below:
- The Allwinner H6 makes its debut with the Pine-H64 board, and we get
two new machines based on its older siblings: the H5 based OrangePi
Zero+ and the A64 based Teres-I Laptop from Olimex. On the 32-bit side,
we add The Olimex som204 based on Allwinner A20, and the Banana Pi M2
Zero development board (based on H2).
- NVIDIA adds support for Tegra194 aka "Xavier", plus their p2972
development board and p2888 CPU module.
- The Nuvoton npcm750 is a BMC that was newly added, for now we only
support running on the evaluation board.
- STmicroelectronics stm32 gains support for the stm32mp157c and two
evaluation boards.
- The Toradex Colibri board family grows a few members based on the
i.MX6ULL variant.
- The Advantec DMS-BA16 is a Qseven module using the NXP i.MX6
family of chips.
- The Phytec phyBOARD Mira is a family of industrial boards based on
i.MX6. For now, four models get added.
- TI am335x based PDU-001 is an industrial embedded machine used for
traffic monitoring
- The Aspeed platform now supports running on the BMC on the Qualcomm
Centriq 2400 server
- Samsung Exynos4 based Galaxy S3 is a family of mobile phones Qualcomm
msm8974 based Galaxy S5 is a rather different phone made by the same
company.
- The Xilinx Zynq and ZynqMP platforms now gained a lot of dts file
for the various boards made by Xilinx themselves, as well as the
Digilent Zybo Z7.
- The ARM Versatile family now supports the "IB2" interface board.
- The Renesas H2 based "Stout" and the H3 based Salvator-X are more
evaluation boards named after a kind of beer, as most of them are.
The r8a77980 (V3H) based "Condor" apparently doesn't follow that
tradition. ;-)
- ROC-RK3328-CC is a simple developement board from the Libre Computer
Project, based on the Rockchips RK3328 SoC
- Haiku is another development board plus Qseven module based on Rockchips
RK3368 and made by Theobroma Systems.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7rHo
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree updates from Arnd Bergmann:
"This is the usual set of changes for device trees, with over 700
non-merged changesets. There is an ongoing set of dtc warning fixes
and the usual bugfixes, cleanups and added device support.
The most interesting bit as usual is support for new machines listed
below:
- The Allwinner H6 makes its debut with the Pine-H64 board, and we
get two new machines based on its older siblings: the H5 based
OrangePi Zero+ and the A64 based Teres-I Laptop from Olimex. On the
32-bit side, we add The Olimex som204 based on Allwinner A20, and
the Banana Pi M2 Zero development board (based on H2).
- NVIDIA adds support for Tegra194 aka "Xavier", plus their p2972
development board and p2888 CPU module.
- The Nuvoton npcm750 is a BMC that was newly added, for now we only
support running on the evaluation board.
- STmicroelectronics stm32 gains support for the stm32mp157c and two
evaluation boards.
- The Toradex Colibri board family grows a few members based on the
i.MX6ULL variant.
- The Advantec DMS-BA16 is a Qseven module using the NXP i.MX6 family
of chips.
- The Phytec phyBOARD Mira is a family of industrial boards based on
i.MX6. For now, four models get added.
- TI am335x based PDU-001 is an industrial embedded machine used for
traffic monitoring
- The Aspeed platform now supports running on the BMC on the Qualcomm
Centriq 2400 server
- Samsung Exynos4 based Galaxy S3 is a family of mobile phones
Qualcomm msm8974 based Galaxy S5 is a rather different phone made
by the same company.
- The Xilinx Zynq and ZynqMP platforms now gained a lot of dts file
for the various boards made by Xilinx themselves, as well as the
Digilent Zybo Z7.
- The ARM Versatile family now supports the "IB2" interface board.
- The Renesas H2 based "Stout" and the H3 based Salvator-X are more
evaluation boards named after a kind of beer, as most of them are.
The r8a77980 (V3H) based "Condor" apparently doesn't follow that
tradition. ;-)
- ROC-RK3328-CC is a simple developement board from the Libre
Computer Project, based on the Rockchips RK3328 SoC
- Haiku is another development board plus Qseven module based on
Rockchips RK3368 and made by Theobroma Systems"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (701 commits)
arm: dts: modify Nuvoton NPCM7xx device tree structure
arm: dts: modify Makefile NPCM750 configuration name
arm: dts: modify clock binding in NPCM750 device tree
arm: dts: modify timer register size in NPCM750 device tree
arm: dts: modify UART compatible name in NPCM750 device tree
arm: dts: add watchdog device to NPCM750 device tree
arm64: dts: uniphier: add ethernet node for PXs3
ARM: dts: uniphier: add pinctrl groups of ethernet for second instance
arm: dts: kirkwood*.dts: use SPDX-License-Identifier for board using GPL-2.0+
arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0+/MIT
arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0
arm: dts: armada-385-turris-omnia: use SPDX-License-Identifier
arm: dts: armada-385-db-ap: use SPDX-License-Identifier
arm: dts: armada-388-rd: use SPDX-License-Identifier
arm: dts: armada-xp-db-xc3-24g4xg: use SPDX-License-Identifier
arm: dts: armada-xp-db-dxbc2: use SPDX-License-Identifier
arm: dts: armada-370-db: use SPDX-License-Identifier
arm: dts: armada-*.dts: use SPDX-License-Identifier for most of the Armada based board
arm: dts: armada-xp-98dx: use SPDX-License-Identifier for prestara 98d SoCs
arm: dts: armada-*.dtsi: use SPDX-License-Identifier for most of the Armada SoCs
...
|
||
|
Zhichang Yuan
|
adf38bb0b5 |
HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings
The low-pin-count (LPC) interface of Hip06/Hip07 accesses I/O port space of peripherals. Implement the LPC host controller driver which performs the I/O operations on the underlying hardware. We don't want to touch existing drivers such as ipmi-bt, so this driver applies the indirect-IO introduced in the previous patch after registering an indirect-IO node to the indirect-IO devices list which will be searched by the I/O accessors to retrieve the host-local I/O port. The driver config is set as a bool instead of a tristate. The reason here is that, by the very nature of the driver providing a logical PIO range, it does not make sense to have this driver as a loadable module. Another more specific reason is that the Huawei D03 board which includes Hip06 SoC requires the LPC bus for UART console, so should be built in. Tested-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Zou Rongrong <zourongrong@huawei.com> Signed-off-by: Zhichang Yuan <yuanzhichang@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Rob Herring <robh@kernel.org> # dts part |
||
|
Arnd Bergmann
|
fd553821a9 |
The rk3399 gained support its Cadence displayport controller and some
minor additions like pins for 2ch i2s0 and the cif test clocks as well as a default rate for ACLK_VIO that should be 400MHz according to the TRM. The rk3328 got uart dmas fixed - a non-critical fix, as nobody was using that so far. New boards are the rk3328-based roc-rk3328-cc, the rk3368-based Lion-SOM + baseborad from Theobroma Systems and a standalone variant of the Sapphire board, as a lot of people where using that without the Exkavator baseboard. Sapphire also saw a lot of small cleanups of things that are not part of the actual Sapphire board, but the baseboard instead. The rk3399-puma board got i2s and tsadc support and Gru got its DP node enabled. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlqpTQoQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgZ0uCACl6GsROypjpCGLtCsxlaAXdjk0EuBI3rzy wW2AkmeJQHvMPYIAodVUTqEJW7w2M4V0LbF1YOzebSyLMckejKy2jQGNcjQeQ//p QAIilflqxqYHTzx9Abv1EpX9uYVsLA46TUnInHAlo+SyDcDAx5/D37oASS+EvlKS AHniQE5XfH/zf/0ASRqyzKXI+rxhovinUCeVxsJmWS5+jUchUy/PTgx3OBnTahd+ JYjEOygTfPJoVXI3LBsQhuZdGZAVoCrDETsur8tMBBHwUHDQxy2rpLwzqv72C+SR kdO93Xgjz1+mML3qivJPKYPlc4OabFKgP9BzMnBsALJPXykX7cQw =Ay+8 -----END PGP SIGNATURE----- Merge tag 'v4.17-rockchip-dts64-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Pull "Rockchip dts64 changes for 4.17" from Heiko Stübner: The rk3399 gained support its Cadence displayport controller and some minor additions like pins for 2ch i2s0 and the cif test clocks as well as a default rate for ACLK_VIO that should be 400MHz according to the TRM. The rk3328 got uart dmas fixed - a non-critical fix, as nobody was using that so far. New boards are the rk3328-based roc-rk3328-cc, the rk3368-based Lion-SOM + baseborad from Theobroma Systems and a standalone variant of the Sapphire board, as a lot of people where using that without the Exkavator baseboard. Sapphire also saw a lot of small cleanups of things that are not part of the actual Sapphire board, but the baseboard instead. The rk3399-puma board got i2s and tsadc support and Gru got its DP node enabled. * tag 'v4.17-rockchip-dts64-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: remove keep-power-in-suspend from sdhci of rk3399-sapphire arm64: dts: rockchip: assign clock rate for ACLK_VIO on rk3399 arm64: dts: rockchip: add a standalone version of the rk3399 sapphire arm64: dts: rockchip: move rk3399-sapphire pwr_btn to daughterboard arm64: dts: rockchip: move rk3399-sapphire i2s2 to daughterboard arm64: dts: rockchip: move rk3399-sapphire sdio to excavator baseboard arm64: dts: rockchip: enable I2S codec on rk3399-puma-haikou arm64: dts: rockchip: move i2s0 node from baseboard to SoM on rk3399-puma arm64: dts: rockchip: vdd_log on rk3399-sapphire is not an i2c slave arm64: dts: rockchip: add Haikou baseboard with RK3368-uQ7 SoM arm64: dts: rockchip: add RK3368-uQ7 (Lion) SoM dt-bindings: add RK3368-uQ7 SoM and EVK base board arm64: dts: rockchip: Fix RK3328 UART DMAs arm64: dts: rockchip: enable DP for rk3399-gru arm64: dts: rockchip: add cdn-dp node for rk3399. arm64: dts: rockchip: add i2s0-2ch-bus pins on rk3399 arm64: dts: rockchip: enable tsadc on rk3399-puma arm64: dts: rockchip: add roc-rk3328-cc board arm64: dts: rockchip: Add cif test clocks for rk3399 |
||
|
Arnd Bergmann
|
8650b9feb0 |
Allwinner core changes for 4.17
Here is our bunch of changes for mach-sunxi for this release cycle. This is basically only about bringing the SMP support to the A80, which has a bug in hardware and cannot use PSCI like the other SoCs we have. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE0VqZU19dR2zEVaqr0rTAlCFNr3QFAlqzx8kACgkQ0rTAlCFN r3S+0xAAiLjIUPT/N56xBh9F8j3KP9HU6tVw47F92MAU0x/mcfiQl5UgDkLU1NkI NxbL4SqirjFAdW2xv7/Lj8XEAqftFOOtBb1383WC3Hvzm/BSGtnC6nKqMdzW2k1Q AJhKox3OUhASCpu6hup7/cFhgg3S+h1dC689TNv2BJTSk9RIV2wUctnTt4HDh6Yj VNanttnPHOCwUUfQl8CtU+PU/crKK9usPCCE9pm3522wqbTz3QzhDvOT0bBeLlXx DkcU3+UITyg/OXBXoj1GUe3Y2I/aFz8DRfGL5HKIQFLmkFjmzzOnbgcDkoYgIwoN WVxNMPaNGUiytGDe8Cr650rX15txWpori4XjhGlrAc/73csY8InuNgFh0OMbGsau Req4Hj30ZuK7/pNOEqIrWOgmqugDX1/cOeBBqYBQugBylUBjLjnIshVlKSrE9hry vjFLS9jOKKdPRZI/y2vVq/GAPkUnTaBNbS6z9JASMDXb8Sj7yySAEww7YZ8u2uay oQuOW6bCHuEmpxvVAhbnt1VI9mte7TygrJjIdhM20oW/A1nChckbrVcV14OuJUtw AduuoCtzigYCcGNZN+2FU/AMPPsfiJXXfw8Va0rcK4SC5VNnD5bQ0CCG4zObHKHT MGWILWGp3WkD+BIosLXlPBxzNxHuuz0s7qzlGBhpsfLzS7zwd6U= =kUb5 -----END PGP SIGNATURE----- Merge tag 'sunxi-core-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/soc Pull "Allwinner core changes for 4.17" from Maxime Ripard: Here is our bunch of changes for mach-sunxi for this release cycle. This is basically only about bringing the SMP support to the A80, which has a bug in hardware and cannot use PSCI like the other SoCs we have. * tag 'sunxi-core-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: sunxi: mc-smp: Split out SoC-specific device node lookup sequence ARM: sunxi: mc-smp: Use DT enable-method for sun9i A80 SMP ARM: sunxi: mc-smp: Fix "lookback" typo ARM: sun9i: smp: Support cpu0 hotplug dt-bindings: ARM: sunxi: Document A80 SoC secure SRAM usage by SMP hotplug ARM: sun9i: smp: Support CPU/cluster power down and hotplugging for cpu1~7 ARM: sun9i: Support SMP bring-up on A80 |
||
|
Arnd Bergmann
|
c3a694ac3b |
Second set of dts changes for omap variants for v4.17
This series of patches configures few new drivers and adds omap5 specific nodes: - Enable USB OTG mode for xhci on am437x - A series of changes to configure aux control module instance on omap5 mostly to get the audio clocks configured - A series of changes to update droid4 for MDM6600 modem USB PHY and UART1 pinctrl -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlqz27sRHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXMl0g/5Ac6Lbj1GtMGh0lPLwbQlEnNNrrRRczcO Bj4IiALC2Kn/DZwypoY4iswNP9qfGEd5R8CW+J2DiSZiqw5WrsncnMmLVGlrAh4g cet9pKaWkQIdu8y0FtAc7Gymxr9la/W8qcS1ysvXELf6jok/0xkOdrX6Zrq79XjC nbw72QGWHi3UAcI90FUI7/FNcFDkPjo8ZoggPDTn4j47/nwIKRcLb+L060GK7ity Tpd0yiqZz1zeZog0+6Fi4GBmQJ1mu3IaD8HELkVlKGHE8GUHd7qDsZN8lPpgfoWZ TQvEDYZKj7gVDm7o6/diSfyMEF1PoSa3lVZ/ST3xmK/DmqzEueWtTLSJvz0XYvtM wpJnAEneVK6lmqciiPiOdmIbV06FtdQScdKqsxBOKzGIuKY4Ygye09IC1ApBdscl BjDJmhomXXQ9j187DbrEMi0WdtXF+1EtUm0ffowhFbL6hd/bOqyz323o+3tMnX8g n0287cP6hcCxFrRMS1/uz4yFMPW+Ew/7lppVlU53KAWjQAc3R2Vkg77MgDQDmmzO 71Ou2Cd6hWmPjcN6VLmStQFtAs3CMWADnCTrEx+JGsMj3LdCIxoBBOrrR176s094 PZafu/JG3QlN/siLcR8UpX5levHxq0kYTJKHs/W3AG0Aep2IV6lG6RnHhBEw49yV t+hLdRHwbGM= =JWxW -----END PGP SIGNATURE----- Merge tag 'omap-for-v4.17/dt-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "Second set of dts changes for omap variants for v4.17" from Tony Lindgren: This series of patches configures few new drivers and adds omap5 specific nodes: - Enable USB OTG mode for xhci on am437x - A series of changes to configure aux control module instance on omap5 mostly to get the audio clocks configured - A series of changes to update droid4 for MDM6600 modem USB PHY and UART1 pinctrl * tag 'omap-for-v4.17/dt-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap4-droid4: Configure uart1 pins ARM: dts: omap4-droid4: Configure MDM6600 USB PHY ARM: dts: omap4-droid4: Fix USB PHY port naming ARM: dts: omap5-board-common: Add phandle for mclk clock for twl6040 ARM: dts: omap5: add fref_xtal_ck support ARM: dts: omap5: add support for control module wkup pad config dt-bindings: omap5: ctrl: Support for control module wkup pad config ARM: dts: am43xx: Enable dual-role mode for USB1 |
||
|
Arnd Bergmann
|
2430bcda36 |
Qualcomm ARM64 Updates for v4.17
* Fix GIC_CPU_MASK_SIMPLE and SPI5 config on MSM8996 * Add SDM845 and kryo385 documentation * Add MSM8916 cooling maps, cpu frequency scaling, APCS, and A53 PLL * Switch APCS to use mailbox on MSM8916 * Add rmtfs-mem on MSM8996 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJasG5uAAoJEFKiBbHx2RXV+YoP/Rlvm9SJ5smJR16d5UzZxlb7 /X8qySsltTYeHa5tx1G0Y29N3S8mFAbVDg2VP/vgvZNJUsRcdZOWpelga6/Njm+u +95g68pexVN9cEoBXMNAB/gmiXoSbk5k0rRQukkvdEJfX+v7SYMN3S8LOm6D6P1e gpa8yDDHTtRN8QhDIyWO1CSl2Sy7YOHis2loHJbTJFvqrTPtS5+iUVT1yldaQ5x9 5VjQ/82DVUYgsh2W/qnqTT+yUJsQPRE1sF2bKHbrLAOoMlPgU0rBeQXEPwQAyYDx ugNYsU4knZ2L9S/B1hjtkPjBe1clX2OH/fHrddHLnrzZSrLdw493h+uI8LKaK5uz eVl+9Cjfkho+/rR+CQ+D5UhTrUnNRdJINh82hWp24pmLqwn1zgijFPtrsWaDOTWt bbqXuNCtRh85Jr6EPjPZlp03vN8YI5q3p2UW4PXuDrvLRyy9VAH188Ua+hWw2GZZ t7axYBGy63cjdkBSOSzAgRvaZ45B4KqClf/HHJk072dGi3dmSeEn3KkZd4agXjJf SyxmOUQ2WolUQKLAyrtso9a8Uje5WgODy3uMAHGjqYZcnScxtqv7f7TJgJBF2xOK +QSO+Jn+N94rc1vDfMk0s/NuE21SH9KoWBjZ8lDH4w934LKgKr9SydZcas59ylc8 hgv4VIEptRCygKxIhTXs =2KM8 -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Pull "Qualcomm ARM64 Updates for v4.17" from Andy Gross: * Fix GIC_CPU_MASK_SIMPLE and SPI5 config on MSM8996 * Add SDM845 and kryo385 documentation * Add MSM8916 cooling maps, cpu frequency scaling, APCS, and A53 PLL * Switch APCS to use mailbox on MSM8916 * Add rmtfs-mem on MSM8996 * tag 'qcom-arm64-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: qcom: Fix SPI5 config on MSM8996 dt-bindings: qcom: Add SDM845 bindings dt-bindings: arm: Document kryo385 cpu arm64: dts: msm8916: Add cpu cooling maps arm64: dts: msm8996: Add rmtfs sharedmem node arm64: dts: qcom: msm8916: Add CPU frequency scaling support arm64: dts: qcom: msm8916: Add clock properties to the APCS node arm64: dts: qcom: msm8916: Probe the APCS mailbox driver arm64: dts: qcom: msm8916: Add msm8916 A53 PLL DT node arm64: dts: msm8996: Fix wrong use of GIC_CPU_MASK_SIMPLE() |
||
|
Arnd Bergmann
|
97be8ab23d |
- mt2712e add auxadc devcie
mt7622: - fix clock bindings description - add nodes for mmc, usb, SATA, PCI, ethernet, cpufreq, PMIC mt6380, pinctrl, scpsys and clock devices -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEiUuSfQSYnG8EMsBltDliWyzx00MFAlqvjBMXHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQtDliWyzx00Nwbg//UK5fODmeOoF/HAUp2tVhKo2J Jo1VXlnisHRENcfJDell+Naclo+yrKFQMF3GylTpiShdm7QymwLWKpFehg4uQbhn Q/ilDAcgCW2fJ2sylNbCs2/AKcnP/G8NWd8pNMdc6sF+Ult7nq1hYSMgY9B9Cu57 IENaKScRcztDHDR2dPHUkNIFUyWS2m6n+FxdqhKWt7w5KJmcpUfoXATc26DWoeO9 AZAx0JuhNMWhTlT+dDTucDDSfMFPfyiwdlPvlu6nEt1ILSes7Z758/adru2gYSmR A1q6QNSUavGK+3oRNM3b4aYVgbD8v+KjnoPZ5XRZvjwdGradIRu4d7aX3p7uCpvD mWRwQL8S9CByFGnWb62meQ7pMamfZJ6/r+v4B4rlTJuYwhM5FxeUOTVCEbTE1P3c jLQUx3i6j7xGznfnJAVuW0UEz2apx2aC/XFTUtZFsplDKMGSup6A0iCVBr/85cul 7f49rbSrclvzr+JQ+NI9UDePWtFI4TSv1oauU7UoWZ+iIE8O706WraPowe7azBx0 z031DHAykPwRKDXhHBRg5Z6xDshb8dL6EYXWzmHVxZmoMUukw/VsqR8ijzXiC8mA RaIYqPjOfZUbZpOxHTfmgZtDf7KLeln+8Tyf+cJkGTe19wg2ulNWo9j1u9ayojou iNY3i7NcvEHQMRxmVOM= =uaVH -----END PGP SIGNATURE----- Merge tag 'v4.16-next-dts64' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt Pull "ARM: mediatek: dts64 updates for v4.16-next" from Matthias Brugger: - mt2712e add auxadc devcie mt7622: - fix clock bindings description - add nodes for mmc, usb, SATA, PCI, ethernet, cpufreq, PMIC mt6380, pinctrl, scpsys and clock devices * tag 'v4.16-next-dts64' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: mt2712: Add auxadc device node. dt-bindings: clock: mediatek: add missing required #reset-cells arm64: dts: mt7622: add mmc related device nodes arm64: dts: mt7622: add usb device nodes arm64: dts: mt7622: add SATA device nodes arm64: dts: mt7622: add PCIe device nodes arm64: dts: mt7622: add ethernet device nodes arm64: dts: mt7622: add flash related device nodes arm64: dts: mt7622: add SoC and peripheral related device nodes arm64: dts: mt7622: turn uart0 clock to real ones arm64: dts: mt7622: add cpufreq related device nodes arm64: dts: mt7622: add PMIC MT6380 related nodes arm64: dts: mt7622: add pinctrl related device nodes arm64: dts: mt7622: add power domain controller device nodes arm64: dts: mt7622: add clock controller device nodes |
||
|
Arnd Bergmann
|
00730c5be8 |
mt7623:
- fix style issues of the dts - add cpu clock properties - add PCI controller - add mt7623 reference board banapi-r2: - enable missing uarts - fix regulator for mmc - fix USB initialization -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEiUuSfQSYnG8EMsBltDliWyzx00MFAlqvir0XHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQtDliWyzx00NezQ//SKVPq3OtXyvTqF2m/tHhdr2j JrRjfqA+jlesJdHSHKGrjKnTtDLBdPvYR8qrit9+GyL6abNXv4VTLMMkUWKFceVU dk66A7a48Vw/QLjZKYcGVnHFY8lZFjko5dtQNhALX1uvZzGXpoIgN8IYuXD/S/HR vMUxM9aKErmKfaX8AOTHiGhLo3Wo70n0GKh0MDT0WyC5HDkp5nLRGhTc9nE+45fw dFcdKCe2O6AY8HRxi/l1ZieWaZxWQ/T3T6JyVys4P6skwMFwVvDj/Kkp+f6R0koN NGB9wPUdnuHDeRGUFtYjZXEXOZWlgGaVEY/T9P0R3i014Nb79s6sSLqwxX1Gwkog IAIOjsAkvcOi3DZCP2NhB6hpCwAx2G1jwACoBKt/THgQMjDRPjD2s4srtX9kqypn BaZKHzcwlk8JyMm/ZqIRAeBu1BaV1Z/fDaMxeJMXbEEIhDt6nVE6F53tlbUyHUI8 o1t3fjiVntuB9JCrLh8kyhfNx+jv+vfSRDD40q3sqjcejt4HebZjnqglXVkCuCc8 E1n1Q0dHVdMGdqxBibZLmPDq2AvY6vCI3X9MK8xNQ7yshSFTOzpLCxZR6OUavmHr HIufRikFMJzQEOHg8msCeqGisbgpnszx+VfLY9FWdMx3G4M103e/nYY4c3sdW+rx 0N1cZ+xoTAtxHyKZZe0= =KWpa -----END PGP SIGNATURE----- Merge tag 'v4.16-next-dts32' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt Pull "ARM: mediatek: dts32 updates for v4.16-next" from Matthias Brugger: mt7623: - fix style issues of the dts - add cpu clock properties - add PCI controller - add mt7623 reference board banapi-r2: - enable missing uarts - fix regulator for mmc - fix USB initialization * tag 'v4.16-next-dts32' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mt7623: add PCIe related nodes arm: dts: mt7623: use - instead of _ in DT node name arm: dts: mt7623: remove useless property pinctrl-names at node switch@0 arm: dts: mt7623: add related clock properties to cpu[1-3] nodes arm: dts: mt7623: enable three available UARTs on bananapi-r2 arm: dts: mt7623: fix the regulators mmc should use on bananapi-r2 arm: dts: mt7623: fix USB initialization fails on bananapi-r2 dt-bindings: arm: mediatek: add support for more mt7623 reference boards |
||
|
Arnd Bergmann
|
e5bdf7775e |
Renesas ARM Based SoC DT Bindings Updates for v4.17
* Document the bindings for: - R-Car V3H (r8a77980) SoC - Condor board with V3H (r8a77980) SoC - Stout (ADAS Starterkit) board with R-Car H2 (r8a7790) SoC - R-Car M3-N (r8a77965) SoC - Salvator-X and Salvator-XS boards with R-Car M3-N (r8a77965) SoC * Document that Armadillo-800 is compatibie with R-Mobile A1 (r8a7740) SoC * Document part numbers of Wheat and V3MSK boards -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlqrxnEACgkQ189kaWo3 T76VLA/7BzoLAU0LoMnoqW2D58+z6Vx9aD7y2eiarA8LY0PCqhhtqQJG0g1+D3sM d80kvRZ8cnbzWyjhGvolF9hILNPqMYyDBWLrb7DKTmmcaqirw/tFsF6rGWC+9Vi5 vjGikkp9VwM03vDO5BAgrTiDGTT9Ey26tHznLdGkFSOCdKkVkT03ih2HAMj6ghOe 7ZR1iSIfo5aXTCncMupeTRCtwg1jNi1OmaodUPPTdctXftrqixDGIrm6zObziRJp iX59K0POmCk4saTupmb07tqAsUNhnz/+qgl3+vmdmE1VSweXhqgT4AzU3lf5mJCH K5V6Odx3dC1XrgdxSUsCKL4pAfjZA/gvSZxKVxaKldhfnv6x4fyOXzfv29zPzVdb hQhT5Tb5O5vacyz2+DMHRqErYeAMPh1Fg8saWFVYpP8jSKnAYlbT5tUy6F34Rfz4 p8shDiZ7nr2uk2hdZUHB13KXU4CepVXVS4TDuQXuSnP28maXyeV3hXXBS+DRQCSa CneuijA5+XlEZlKI9nATnKGEcJtwz/sKn5iBuvB3m1kf3PdpoE1Pgay1yXTaUfRe b7Yi9mOtv0qIgKsX/V8wJcOxWoAlk2I3NNSzSZ3APZAKL8uqHda/QD8+oSGaHqyb HA3LH4GhfKnKyKMN7a8Q5MZ3tyHDA9FevGSHC7iwCt6WImhTyV0= =ji+A -----END PGP SIGNATURE----- Merge tag 'renesas-dt-bindings-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Renesas ARM Based SoC DT Bindings Updates for v4.17" from Simon Horman: * Document the bindings for: - R-Car V3H (r8a77980) SoC - Condor board with V3H (r8a77980) SoC - Stout (ADAS Starterkit) board with R-Car H2 (r8a7790) SoC - R-Car M3-N (r8a77965) SoC - Salvator-X and Salvator-XS boards with R-Car M3-N (r8a77965) SoC * Document that Armadillo-800 is compatibie with R-Mobile A1 (r8a7740) SoC * Document part numbers of Wheat and V3MSK boards * tag 'renesas-dt-bindings-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas: dt-bindings: arm: Document Renesas R-Car M3-N-based Salvator-X board dt-bindings: arm: Document Renesas R-Car M3-N-based Salvator-XS board dt-bindings: arm: Document Renesas V3MSK and Wheat board part numbers dt-bindings: arm: Document SoC compatible value for Armadillo-800 EVA dt-bindings: arm: Document R-Car M3-N SoC DT bindings dt-bindings: arm: Document Renesas H2-based Stout DT bindings dt-bindings: arm: document Condor board bindings dt-bindings: arm: document R8A77980 SoC bindings |
||
|
Arnd Bergmann
|
2d78b1dafc |
dt-bindings: Changes for v4.17-rc1
Mostly cleanup of existing bindings and initial support for Tegra194. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlqrz6ITHHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zoU/qD/4obhViYCPQBnbbObYIb3CmFNvbN99k DO46UMz0TfQuhcmUXlSpIjn7Q5KS16gvzdxJjHxKwWnibVfuQBY8BOWug4oBBRsY 88xybbXS+dnYNihwuH5fycyaZ1xzpRIlpiz2oSpZ0OQgrxy12MSlCZCWzDf/FhSc XS4Uye1JYtIZ9oFgos/FwDw6CkAJv19uRtfMT/s+hOywkUt5Q2SxtUhvLyJa5TnV O9TdvhfoC1oPC9qOgU53z24iY1JHt/SpXxL81I68gDIV5LJLruLwsv5DAp9g+agV eeKFbE/y3H5l+gZovXDC/BDhuPcmsNTRxr8Y6LB+UiJjM7Val0BC2OIQYW5/tGCn wXQXGbLLYg1cA33MaOoUr14EVX4KmTnoBG/gHxRdawqwt1EA3Mg+lHU/R445WTZJ vKV1eJ9qur+v21QoJuVAlElgM95e2guRXU4zZavRg6PGTGladmQzwlxWTLbOKbNh SlzxmTZ5JlfQfp/Db2EZILz83wjEpjmRdy+DR7pIIwPf+CT+8QcQ0XxOWlPTyy2F IX1Y2GHpwj2//MwxvIQbkibbzgTPkTYGFLnAduu3ZWnOo8maZiLQXJOd4JzHu72S e12vrplFR9DEqTZRcKNrsgG01i1bmw5QZQ01F7ulDyyXvjO73BN2im9ilXO/Gcmr MO3rgzVZm31k9w== =7+yt -----END PGP SIGNATURE----- Merge tag 'tegra-for-4.17-dt-bindings' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Pull "dt-bindings: Tegra changes for v4.17-rc1" from Thierry Reding: Mostly cleanup of existing bindings and initial support for Tegra194. * tag 'tegra-for-4.17-dt-bindings' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt/bindings: Fix binding examples for Tegra GMI controller dt-bindings: phy: Clarify ULPI PHY source clock dt-bindings: tegra: Add documentation for nvidia,tegra194-pmc dt-bindings: tegra: Add missing chips and NVIDIA boards |
||
|
Tero Kristo
|
418dbeb618 |
dt-bindings: omap5: ctrl: Support for control module wkup pad config
The pad configuration area under control module wkup has some miscellaneous config registers, that are not pinmux related. Add new compatible string for this section of control module. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> |
||
|
Ryder Lee
|
9cb12501f3 |
dt-bindings: clock: mediatek: add audsys support for MT2701
This patch adds a compatible string for MT2701. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Ryder Lee
|
2817a92dd9 |
dt-bindings: clock: mediatek: update audsys documentation to adapt MFD device
The MediaTek audio hardware block that exposes functionalities that are handled by separate subsystems in the kernel. These functions are all mapped somewhere at 0x112xxxxx, and there are some control bits are mixed up with other functions within the same registers. This patch modifies example to illustrate child nodes. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Sean Wang
|
2c97fa22da |
dt-bindings: clock: mediatek: add missing required #reset-cells
All ethsys, pciesys and ssusbsys internally include reset controller, so explicitly add back these missing cell definitions to related bindings and examples. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: Rob Herring <robh@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Arnd Bergmann
|
4bb4aceae9 |
arm: Xilinx(Zynq and ZynqMP) DT changes for v4.17
- Use SPDX license identifier - Add Xilinx ZynqMP boards zcu100-revC, zcu102-revA/revB/rev1.0, zcu104-revA, zcu106-revA, zcu111-revA, zc1751 dc1/dc2/dc3/dc4 - Add Xilinx Zynq boards cc108, zc770 dc1/dc2/dc3/dc4 - Add Digilent Zybo Z7 - Minor fixes in current DTSes -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEABECAAYFAlqg4+cACgkQykllyylKDCFqOACfbtI4S2j96N3AsHy3sWFUP7li XlUAn2bSg/d/x8gSSt5bO2SlGqWkOQxw =iZic -----END PGP SIGNATURE----- Merge tag 'xilinx-dt-for-4.17' of https://github.com/Xilinx/linux-xlnx into next/dt Pull "arm: Xilinx(Zynq and ZynqMP) DT changes for v4.17" from Michal Simek: - Use SPDX license identifier - Add Xilinx ZynqMP boards zcu100-revC, zcu102-revA/revB/rev1.0, zcu104-revA, zcu106-revA, zcu111-revA, zc1751 dc1/dc2/dc3/dc4 - Add Xilinx Zynq boards cc108, zc770 dc1/dc2/dc3/dc4 - Add Digilent Zybo Z7 - Minor fixes in current DTSes * tag 'xilinx-dt-for-4.17' of https://github.com/Xilinx/linux-xlnx: (22 commits) arm: dts: zynq: Add Digilent Zybo Z7 board arm: zynq: Add support for Xilinx zc770 xm013 dc4 board arm: zynq: Add support for Xilinx zc770 xm012 dc3 board arm: zynq: Add support for Xilinx zc770 xm011 dc2 board arm: zynq: Add support for Xilinx zc770 xm010 dc1 board arm: zynq: Add Xilinx cc108 board arm: zynq: Add missing address node name in microzed board arm: dts: zynq: Use SPDX-License-Identifier arm: zynq: Use i2c-mux instead of i2cswitch for pca9548 arm64: zynqmp: Add support for Xilinx zc1751 arm64: zynqmp: Add support for Xilinx zc12XX boards arm64: zynqmp: Add support for Xilinx zcu111-revA arm64: zynqmp: Add support for Xilinx zcu106-revA arm64: zynqmp: Add support for Xilinx zcu104-revA arm64: zynqmp: Add support for Xilinx zcu102 arm64: zynqmp: Add support for Xilinx zcu100-revC dt-bindings: xilinx: Add description for ZynqMP arm64: zynqmp: Add 8-bit bus width property for ep108 arm64: zynqmp: Added OOB timing settings in zynqmp-ep108.dts arm64: zynqmp: Add SPDX license identifier ... |
||
|
Sean Wang
|
3f4a9729c4 |
dt-bindings: arm: mediatek: add support for more mt7623 reference boards
Update binding document for more mt7623[A,N] reference boards being supported. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Chen-Yu Tsai
|
8591743f12 |
ARM: sunxi: mc-smp: Use DT enable-method for sun9i A80 SMP
Instead of having an early init function check the machine compatible and installing multi-cluster SMP support for the A80 if it matches, use a new cpu enable-method string. This makes the platform support future proof in case anyone manages to add PSCI support. The original init code for the SMP support is changed into the .prepare_cpus callback in the smp_operations structure. Instead of panicing when resources are missing like on some platforms, our code merely guards against engaging SMP or CPU hotplug and returns an error. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org> |