Pull EFI fixes from Thomas Gleixner:
"Two fixes for EFI/PAT:
- a 32bit overflow bug in the PAT code which was unearthed by the
large EFI mappings
- prevent a boot hang on large systems when EFI mixed mode is enabled
but not used"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Only map RAM into EFI page tables if in mixed-mode
x86/mm/pat: Prevent hang during boot when mapping pages
Pull irq fixes from Thomas Gleixner:
"Three fixes for irq core and irq chip drivers:
- Do not set the irq type if type is NONE. Fixes a boot regression
on various SoCs
- Use the proper cpu for setting up the GIC target list. Discovered
by the cpumask debugging code.
- A rather large fix for the MIPS-GIC so per cpu local interrupts
work again. This was discovered late because the code falls back
to slower timers which use normal device interrupts"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips-gic: Fix local interrupts
irqchip/gicv3: Silence noisy DEBUG_PER_CPU_MAPS warning
genirq: Skip chained interrupt trigger setup if type is IRQ_TYPE_NONE
The definition of the flush hint table as:
void __iomem *flush_wpq[0][0];
...passed the unit test, but is broken as flush_wpq[0][1] and
flush_wpq[1][0] refer to the same entry. Fix this to use a helper that
calculates a slot in the table based on the geometry of flush hints in
the region. This is important to get right since virtualization
solutions use this mechanism to trigger hypervisor flushes to platform
persistence.
Reported-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Merge VM fixes from High Dickins:
"I get the impression that Andrew is away or busy at the moment, so I'm
going to send you three independent uncontroversial little mm fixes
directly - though none is strictly a 4.8 regression fix.
- shmem: fix tmpfs to handle the huge= option properly from Toshi
Kani is a one-liner to fix a major embarrassment in 4.8's hugepages
on tmpfs feature: although Hillf pointed it out in June, somehow
both Kirill and I repeatedly dropped the ball on this one. You
might wonder if the feature got tested at all with that bug in:
yes, it did, but for wider testing coverage, Kirill and I had each
relied too much on an override which bypasses that condition.
- huge tmpfs: fix Committed_AS leak just a run-of-the-mill accounting
fix in the same feature.
- mm: delete unnecessary and unsafe init_tlb_ubc() is an unrelated
fix to 4.3's TLB flush batching in reclaim: the bug would be rare,
and none of us will be shamed if this one misses 4.8; but it got
such a quick ack from Mel today that I'm inclined to offer it along
with the first two"
* emailed patches from Hugh Dickins <hughd@google.com>:
mm: delete unnecessary and unsafe init_tlb_ubc()
huge tmpfs: fix Committed_AS leak
shmem: fix tmpfs to handle the huge= option properly
init_tlb_ubc() looked unnecessary to me: tlb_ubc is statically
initialized with zeroes in the init_task, and copied from parent to
child while it is quiescent in arch_dup_task_struct(); so I went to
delete it.
But inserted temporary debug WARN_ONs in place of init_tlb_ubc() to
check that it was always empty at that point, and found them firing:
because memcg reclaim can recurse into global reclaim (when allocating
biosets for swapout in my case), and arrive back at the init_tlb_ubc()
in shrink_node_memcg().
Resetting tlb_ubc.flush_required at that point is wrong: if the upper
level needs a deferred TLB flush, but the lower level turns out not to,
we miss a TLB flush. But fortunately, that's the only part of the
protocol that does not nest: with the initialization removed, cpumask
collects bits from upper and lower levels, and flushes TLB when needed.
Fixes: 72b252aed5 ("mm: send one IPI per CPU to TLB flush all entries after unmapping pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: stable@vger.kernel.org # 4.3+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Under swapping load on huge tmpfs, /proc/meminfo's Committed_AS grows
bigger and bigger: just a cosmetic issue for most users, but disabling
for those who run without overcommit (/proc/sys/vm/overcommit_memory 2).
shmem_uncharge() was forgetting to unaccount __vm_enough_memory's
charge, and shmem_charge() was forgetting it on the filesystem-full
error path.
Fixes: 800d8c63b2 ("shmem: add huge pages support")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
shmem_get_unmapped_area() checks SHMEM_SB(sb)->huge incorrectly, which
leads to a reversed effect of "huge=" mount option.
Fix the check in shmem_get_unmapped_area().
Note, the default value of SHMEM_SB(sb)->huge remains as
SHMEM_HUGE_NEVER. User will need to specify "huge=" option to enable
huge page mappings.
Reported-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Similar to commit 3be07244b7 ("ip6_gre: fix flowi6_proto value in
xmit path"), set flowi6_proto to IPPROTO_GRE for output route lookup.
Up until now, ip6gre_xmit_other() has set flowi6_proto to a bogus value.
This affected output route lookup for packets sent on an ip6gretap device
in cases where routing was dependent on the value of flowi6_proto.
Since the correct proto is already set in the tunnel flowi6 template via
commit 252f3f5a11 ("ip6_gre: Set flowi6_proto as IPPROTO_GRE in xmit
path."), simply delete the line setting the incorrect flowi6_proto value.
Suggested-by: Jiri Benc <jbenc@redhat.com>
Fixes: c12b395a46 ("gre: Support GRE over IPv6")
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Lance Richardson <lrichard@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull i2c fixes from Wolfram Sang:
"Three driver bugfixes: fixing uninitialized memory pointers (eg20t),
pm/clock imbalance (qup), and a wrongly set cached variable (pc954x)"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended
i2c: mux: pca954x: retry updating the mux selection on failure
i2c-eg20t: fix race between i2c init and interrupt enable
Pull input updates from Dmitry Torokhov:
"Just a fix up for the firmware handling to the Silead driver (which is
a new driver in this release)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: silead_gsl1680 - use "silead/" prefix for firmware loading
Input: silead_gsl1680 - document firmware-name, fix implementation
Pull block fixes from Jens Axboe:
"Three fixes, two regressions and one that poses a problem in blk-mq
with the new nvmef code"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx
nvme-rdma: only clear queue flags after successful connect
blk-throttle: Extend slice if throttle group is not empty
On the v2 hierarchy, "cgroup.subtree_control" rejects controller
enables if the cgroup has processes in it. The enforcement of this
logic assumes that the cgroup wouldn't have any css_sets associated
with it if there are no tasks in the cgroup, which is no longer true
since a79a908fd2 ("cgroup: introduce cgroup namespaces").
When a cgroup namespace is created, it pins the css_set of the
creating task to use it as the root css_set of the namespace. This
extra reference stays as long as the namespace is around and makes
"cgroup.subtree_control" think that the namespace root cgroup is not
empty even when it is and thus reject controller enables.
Fix it by making cgroup_subtree_control() walk and test emptiness of
each css_set instead of testing whether the list_head is empty.
While at it, update the comment of cgroup_task_count() to indicate
that the returned value may be higher than the number of tasks, which
has always been true due to temporary references and doesn't break
anything.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Cc: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Cc: Aditya Kali <adityakali@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: stable@vger.kernel.org # v4.6+
Fixes: a79a908fd2 ("cgroup: introduce cgroup namespaces")
Link: https://github.com/systemd/systemd/pull/3589#issuecomment-249089541
Pull btrfs fixes from Chris Mason:
"Josef fixed a problem when quotas are enabled with his latest ENOSPC
rework, and Jeff added more checks into the subvol ioctls to avoid
tripping up lookup_one_len"
* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: ensure that file descriptor used with subvol ioctls is a dir
Btrfs: handle quota reserve failure properly
A fix for an issue with double locking that was introduced earlier this
release. I'd missed in review that we were already in a locked region
when trying to drop part of the cache.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJX5XcsAAoJECTWi3JdVIfQSfEH/iGoQHxcIyPeTBOk8XUIkmkJ
XgaQmZfj2RNKPbCug8KDhDks9qDL/w0/2DG00Trv6pVSFHyBKfX6AQEh0GgmYBJF
trsL1ai/F1dlUbrQaOGMkfUPSF3DvYRsM4/kJOxSruVYsK5PUk2zXEw9kPmquB57
K7IRru5KNDyH5p08h6jbm6po+0QhyaFnCi4iX5kqrvqPFWeP15KHfd+vuRNlWYt0
rf069yqHfZvPXDl6Alw+wdYskxDHT+hvmlWjIGVm1JwAmsx9V2QCDwrhBKG9aZW/
z+mdSKBSJ+RBIp7ucI8sSBm3JsxeSz4+teTe2DRZeGLJmnrZ6756xSNR0pphoAM=
=yYvs
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"A fix for an issue with double locking that was introduced earlier
this release. I'd missed in review that we were already in a locked
region when trying to drop part of the cache"
* tag 'regmap-fix-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: fix deadlock on _regmap_raw_write() error path
Pull crypto fixes from Herbert Xu:
"This fixes a regression in RSA that was only half-fixed earlier in the
cycle. It also fixes an older regression that breaks the keyring
subsystem"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: rsa-pkcs1pad - Handle leading zero for decryption
KEYS: Fix skcipher IV clobbering
- Fix kgdb breakpoint insertion in read-only text sections (when
CONFIG_DEBUG_RODATA or CONFIG_DEBUG_SET_MODULE_RONX are enabled)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=NCBp
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"A couple of last-minute arm64 fixes for 4.8:
- Fix secondary CPU to NUMA node assignment
- Fix kgdb breakpoint insertion in read-only text sections (when
CONFIG_DEBUG_RODATA or CONFIG_DEBUG_SET_MODULE_RONX are enabled)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kgdb: handle read-only text / modules
arm64: Call numa_store_cpu_info() earlier.
- Fix a wrong OOB layout definition in the mxc driver
- Fix incorrect ECC handling in the mtk driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=/jmi
-----END PGP SIGNATURE-----
Merge tag 'tags/nand-fixes-for-4.8-rc8' of git://git.infradead.org/linux-ubifs
Pull MTD fixes from Richard Weinberger:
"NAND Fixes for 4.8-rc8.
This contains fixes for bugs which got introduced in -rc1. Usually
Brian takes NAND patches from Boris, but since Brian is very busy
these days with other stuff and Boris is not yet member of the
kernel.org web of trust I stepped in.
Boris will be in Berlin at ELCE, I'll sign his key and hopefully other
Kernel developers too such that he can issue his own pull requests
soon.
Summary:
- Fix a wrong OOB layout definition in the mxc driver
- Fix incorrect ECC handling in the mtk driver"
* tag 'tags/nand-fixes-for-4.8-rc8' of git://git.infradead.org/linux-ubifs:
mtd: nand: mxc: fix obiwan error in mxc_nand_v[12]_ooblayout_free() functions
mtd: nand: fix chances to create incomplete ECC data when writing
mtd: nand: fix generating over-boundary ECC data when writing
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+uba
-----END PGP SIGNATURE-----
Merge tag 'configfs-for-4.8-2' of git://git.infradead.org/users/hch/configfs
Pull configfs fix from Christoph Hellwig:
"One more trivial fix for the binary attribute code from Phil Turnbull"
* tag 'configfs-for-4.8-2' of git://git.infradead.org/users/hch/configfs:
configfs: Return -EFBIG from configfs_write_bin_file.
This provides the caller a feedback that a given hctx is not mapped and thus
no command can be sent on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
In the mipsr2_decoder() function, used to emulate pre-MIPSr6
instructions that were removed in MIPSr6, the init_fpu() function is
called if a removed pre-MIPSr6 floating point instruction is the first
floating point instruction used by the task. However, init_fpu()
performs varous actions that rely upon not being migrated. For example
in the most basic case it sets the coprocessor 0 Status.CU1 bit to
enable the FPU & then loads FP register context into the FPU registers.
If the task were to migrate during this time, it may end up attempting
to load FP register context on a different CPU where it hasn't set the
CU1 bit, leading to errors such as:
do_cpu invoked from kernel context![#2]:
CPU: 2 PID: 7338 Comm: fp-prctl Tainted: G D 4.7.0-00424-g49b0c82 #2
task: 838e4000 ti: 88d38000 task.ti: 88d38000
$ 0 : 00000000 00000001 ffffffff 88d3fef8
$ 4 : 838e4000 88d38004 00000000 00000001
$ 8 : 3400fc01 801f8020 808e9100 24000000
$12 : dbffffff 807b69d8 807b0000 00000000
$16 : 00000000 80786150 00400fc4 809c0398
$20 : 809c0338 0040273c 88d3ff28 808e9d30
$24 : 808e9d30 00400fb4
$28 : 88d38000 88d3fe88 00000000 8011a2ac
Hi : 0040273c
Lo : 88d3ff28
epc : 80114178 _restore_fp+0x10/0xa0
ra : 8011a2ac mipsr2_decoder+0xd5c/0x1660
Status: 1400fc03 KERNEL EXL IE
Cause : 1080002c (ExcCode 0b)
PrId : 0001a920 (MIPS I6400)
Modules linked in:
Process fp-prctl (pid: 7338, threadinfo=88d38000, task=838e4000, tls=766527d0)
Stack : 00000000 00000000 00000000 88d3fe98 00000000 00000000 809c0398 809c0338
808e9100 00000000 88d3ff28 00400fc4 00400fc4 0040273c 7fb69e18 004a0000
004a0000 004a0000 7664add0 8010de18 00000000 00000000 88d3fef8 88d3ff28
808e9100 00000000 766527d0 8010e534 000c0000 85755000 8181d580 00000000
00000000 00000000 004a0000 00000000 766527d0 7fb69e18 004a0000 80105c20
...
Call Trace:
[<80114178>] _restore_fp+0x10/0xa0
[<8011a2ac>] mipsr2_decoder+0xd5c/0x1660
[<8010de18>] do_ri+0x90/0x6b8
[<80105c20>] ret_from_exception+0x0/0x10
Fix this by disabling preemption around the call to init_fpu(), ensuring
that it starts & completes on one CPU.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: b0a668fb20 ("MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator for MIPS R6")
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.0+
Patchwork: https://patchwork.linux-mips.org/patch/14305/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If DBGUNDO() is enabled (FASTRETRANS_DEBUG > 1), a compile
error will happen, since inet6_sk(sk)->daddr became sk->sk_v6_daddr
Fixes: efe4208f47 ("ipv6: make lookups simpler and faster")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With TCP MTU probing enabled and offload TX checksumming disabled,
tcp_mtu_probe() calculated the wrong checksum when a fragment being copied
into the probe's SKB had an odd length. This was caused by the direct use
of skb_copy_and_csum_bits() to calculate the checksum, as it pads the
fragment being copied, if needed. When this fragment was not the last, a
subsequent call used the previous checksum without considering this
padding.
The effect was a stale connection in one way, as even retransmissions
wouldn't solve the problem, because the checksum was never recalculated for
the full SKB length.
Signed-off-by: Douglas Caetano dos Santos <douglascs@taghos.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEcBAABCgAGBQJX45B3AAoJED07qiWsqSVqw34H/060v5lUgOYtRU4Eq2v9PJ9K
S+zTHFObExqHB2CdIqoYoWROG8HT0KcaDI7R1Ua62lM0kM9JucbMUghDALdQiSSE
GG2n7VWgAwpDTh+HL9FCX4sRSjgJ5efRCcGV/x+W/bc9lpFdjCY2G41S3od2Ts6v
m54uXaUPAK29G2rMOUIFKX8IqWcG+OvUCnt+iDeijHRgzwDvNV1vNW9sTPJQjLdN
z1jwSVHelrG/7bBJ5ZuVQVCnF564cTRCr+ZKuwCFXI6fp7DLzup4pqzS/+S0hiVP
MPfuDYoYE1lOVaYgzbR9QSo11TGhCRfnFgYUF9hgklDW+iOQ9heVMXhZ6TRKbBA=
=8O8M
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-4.8-20160922' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2016-09-22
this is a pull request of one patch for the upcoming linux-4.8 release.
The patch by Sergei Miroshnichenko fixes a potential deadlock in the generic
CAN device code that cann occour after a bus-off.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 2ccccf5fb4 ("net_sched: update hierarchical backlog too")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: Stas Nichiporovich <stasn77@gmail.com>
Fixes: 2ccccf5fb4 ("net_sched: update hierarchical backlog too")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle read-only cases when CONFIG_DEBUG_RODATA (4.0) or
CONFIG_DEBUG_SET_MODULE_RONX (3.18) are enabled by using
aarch64_insn_write() instead of probe_kernel_write() as introduced by
commit 2f896d5866 ("arm64: use fixmap for text patching") in 4.0.
Fixes: 11d91a770f ("arm64: Add CONFIG_DEBUG_SET_MODULE_RONX support")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The wq_numa_init() function makes a private CPU to node map by calling
cpu_to_node() early in the boot process, before the non-boot CPUs are
brought online. Since the default implementation of cpu_to_node()
returns zero for CPUs that have never been brought online, the
workqueue system's view is that *all* CPUs are on node zero.
When the unbound workqueue for a non-zero node is created, the
tsk_cpus_allowed() for the worker threads is the empty set because
there are, in the view of the workqueue system, no CPUs on non-zero
nodes. The code in try_to_wake_up() using this empty cpumask ends up
using the cpumask empty set value of NR_CPUS as an index into the
per-CPU area pointer array, and gets garbage as it is one past the end
of the array. This results in:
[ 0.881970] Unable to handle kernel paging request at virtual address fffffb1008b926a4
[ 1.970095] pgd = fffffc00094b0000
[ 1.973530] [fffffb1008b926a4] *pgd=0000000000000000, *pud=0000000000000000, *pmd=0000000000000000
[ 1.982610] Internal error: Oops: 96000004 [#1] SMP
[ 1.987541] Modules linked in:
[ 1.990631] CPU: 48 PID: 295 Comm: cpuhp/48 Tainted: G W 4.8.0-rc6-preempt-vol+ #9
[ 1.999435] Hardware name: Cavium ThunderX CN88XX board (DT)
[ 2.005159] task: fffffe0fe89cc300 task.stack: fffffe0fe8b8c000
[ 2.011158] PC is at try_to_wake_up+0x194/0x34c
[ 2.015737] LR is at try_to_wake_up+0x150/0x34c
[ 2.020318] pc : [<fffffc00080e7468>] lr : [<fffffc00080e7424>] pstate: 600000c5
[ 2.027803] sp : fffffe0fe8b8fb10
[ 2.031149] x29: fffffe0fe8b8fb10 x28: 0000000000000000
[ 2.036522] x27: fffffc0008c63bc8 x26: 0000000000001000
[ 2.041896] x25: fffffc0008c63c80 x24: fffffc0008bfb200
[ 2.047270] x23: 00000000000000c0 x22: 0000000000000004
[ 2.052642] x21: fffffe0fe89d25bc x20: 0000000000001000
[ 2.058014] x19: fffffe0fe89d1d00 x18: 0000000000000000
[ 2.063386] x17: 0000000000000000 x16: 0000000000000000
[ 2.068760] x15: 0000000000000018 x14: 0000000000000000
[ 2.074133] x13: 0000000000000000 x12: 0000000000000000
[ 2.079505] x11: 0000000000000000 x10: 0000000000000000
[ 2.084879] x9 : 0000000000000000 x8 : 0000000000000000
[ 2.090251] x7 : 0000000000000040 x6 : 0000000000000000
[ 2.095621] x5 : ffffffffffffffff x4 : 0000000000000000
[ 2.100991] x3 : 0000000000000000 x2 : 0000000000000000
[ 2.106364] x1 : fffffc0008be4c24 x0 : ffffff0ffffada80
[ 2.111737]
[ 2.113236] Process cpuhp/48 (pid: 295, stack limit = 0xfffffe0fe8b8c020)
[ 2.120102] Stack: (0xfffffe0fe8b8fb10 to 0xfffffe0fe8b90000)
[ 2.125914] fb00: fffffe0fe8b8fb80 fffffc00080e7648
.
.
.
[ 2.442859] Call trace:
[ 2.445327] Exception stack(0xfffffe0fe8b8f940 to 0xfffffe0fe8b8fa70)
[ 2.451843] f940: fffffe0fe89d1d00 0000040000000000 fffffe0fe8b8fb10 fffffc00080e7468
[ 2.459767] f960: fffffe0fe8b8f980 fffffc00080e4958 ffffff0ff91ab200 fffffc00080e4b64
[ 2.467690] f980: fffffe0fe8b8f9d0 fffffc00080e515c fffffe0fe8b8fa80 0000000000000000
[ 2.475614] f9a0: fffffe0fe8b8f9d0 fffffc00080e58e4 fffffe0fe8b8fa80 0000000000000000
[ 2.483540] f9c0: fffffe0fe8d10000 0000000000000040 fffffe0fe8b8fa50 fffffc00080e5ac4
[ 2.491465] f9e0: ffffff0ffffada80 fffffc0008be4c24 0000000000000000 0000000000000000
[ 2.499387] fa00: 0000000000000000 ffffffffffffffff 0000000000000000 0000000000000040
[ 2.507309] fa20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 2.515233] fa40: 0000000000000000 0000000000000000 0000000000000000 0000000000000018
[ 2.523156] fa60: 0000000000000000 0000000000000000
[ 2.528089] [<fffffc00080e7468>] try_to_wake_up+0x194/0x34c
[ 2.533723] [<fffffc00080e7648>] wake_up_process+0x28/0x34
[ 2.539275] [<fffffc00080d3764>] create_worker+0x110/0x19c
[ 2.544824] [<fffffc00080d69dc>] alloc_unbound_pwq+0x3cc/0x4b0
[ 2.550724] [<fffffc00080d6bcc>] wq_update_unbound_numa+0x10c/0x1e4
[ 2.557066] [<fffffc00080d7d78>] workqueue_online_cpu+0x220/0x28c
[ 2.563234] [<fffffc00080bd288>] cpuhp_invoke_callback+0x6c/0x168
[ 2.569398] [<fffffc00080bdf74>] cpuhp_up_callbacks+0x44/0xe4
[ 2.575210] [<fffffc00080be194>] cpuhp_thread_fun+0x13c/0x148
[ 2.581027] [<fffffc00080dfbac>] smpboot_thread_fn+0x19c/0x1a8
[ 2.586929] [<fffffc00080dbd64>] kthread+0xdc/0xf0
[ 2.591776] [<fffffc0008083380>] ret_from_fork+0x10/0x50
[ 2.597147] Code: b00057e1 91304021 91005021 b8626822 (b8606821)
[ 2.603464] ---[ end trace 58c0cd36b88802bc ]---
[ 2.608138] Kernel panic - not syncing: Fatal exception
Fix by moving call to numa_store_cpu_info() for all CPUs into
smp_prepare_cpus(), which happens before wq_numa_init(). Since
smp_store_cpu_info() now contains only a single function call,
simplify by removing the function and out-lining its contents.
Suggested-by: Robert Richter <rric@kernel.org>
Fixes: 1a2db30034 ("arm64, numa: Add NUMA support for arm64 platforms.")
Cc: <stable@vger.kernel.org> # 4.7.x-
Signed-off-by: David Daney <david.daney@cavium.com>
Reviewed-by: Robert Richter <rrichter@cavium.com>
Tested-by: Yisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fix the indefinitiley -> indefinitely typo in Kconfig.debug.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160922205513.17821-1-vivien.didelot@savoirfairelinux.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If the i2c device is already runtime suspended, if qup_i2c_suspend is
executed during suspend-to-idle or suspend-to-ram it will result in the
following splat:
WARNING: CPU: 3 PID: 1593 at drivers/clk/clk.c:476 clk_core_unprepare+0x80/0x90
Modules linked in:
CPU: 3 PID: 1593 Comm: bash Tainted: G W 4.8.0-rc3 #14
Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
PC is at clk_core_unprepare+0x80/0x90
LR is at clk_unprepare+0x28/0x40
pc : [<ffff0000086eecf0>] lr : [<ffff0000086f0c58>] pstate: 60000145
Call trace:
clk_core_unprepare+0x80/0x90
qup_i2c_disable_clocks+0x2c/0x68
qup_i2c_suspend+0x10/0x20
platform_pm_suspend+0x24/0x68
...
This patch fixes the issue by executing qup_i2c_pm_suspend_runtime
conditionally in qup_i2c_suspend.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Fixes this smatch warning:
drivers/media/usb/ttusb-dec/ttusb_dec.c:243 ttusb_dec_handle_irq() error: buffer overflow 'rc_keys' 26 <= 126
As the RC keys should be enabled previously, via:
set_bit(rc_keys[i], input_dev->keybit);
It wouldn't go past the buffer in practice. Yet, as bad
things may happen when going past buffer, it doesn't hurt adding
a check here.
While here, fix CodingStyle issues on the routine.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This avoids some low-level operations.
It has the benefit that now register values van be read from /sys/kernel/debug/regmap
The maximum register value is just a guess - all higher addresses read as zero.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Now that there is a i2c_client, use the more specific dev for logging.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Now that all users of legacy attach are converted it can be removed.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
cx231xx does not yet support attaching new-style i2c_client DVB demod
drivers. Add necessary code base on tuner support for i2c_client.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Afterwards it is possible to convert attaching in card drivers.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When si2165_init fails, the clk values in state are still at zero.
But the dvb-core ignores the return value of init will call tune
afterwards.
This will trigger a division by zero when tuning.
At least check for the variables to be non-zero before dividing.
This happened for a system with WinTV HVR-4400 PCIe-card after suspend-to-disk.
Do suspend-to-disk without accessing the DVB device before.
After wakeup try to tune.
si2165_init fails at checking the chip_mode and aborts.
Then si2165_set_if_freq_shift will fail with div-by-zero.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Such fallback string is present in the 'soc_camera' version of the R-Car VIN
driver, so need to add it here as well...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
inside lgdt3306a_search we reading demod status 20 times with 50 msec sleep after each read.
This gives us more than 1 sec of delay. Removing this delay should not affect demod functionality.
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Acked-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The workqueue "_irq_audio_queues" runs the audio upstream handler.
It has a single work item(&dev->_audio_work_entry) and hence doesn't
require ordering. Also, it is not being used on a memory reclaim path.
Hence, the singlethreaded workqueue has been replaced with the use of
system_wq.
System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.
The work item has been flushed in cx25821_stop_upstream_audio() to ensure
that nothing is pending when the driver is disconnected.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Pull networking fixes from David Miller:
"Mostly small bits scattered all over the place, which is usually how
things go this late in the -rc series.
1) Proper driver init device resets in bnx2, from Baoquan He.
2) Fix accounting overflow in __tcp_retransmit_skb(),
sk_forward_alloc, and ip_idents_reserve, from Eric Dumazet.
3) Fix crash in bna driver ethtool stats handling, from Ivan Vecera.
4) Missing check of skb_linearize() return value in mac80211, from
Johannes Berg.
5) Endianness fix in nf_table_trace dumps, from Liping Zhang.
6) SSN comparison fix in SCTP, from Marcelo Ricardo Leitner.
7) Update DSA and b44 MAINTAINERS entries.
8) Make input path of vti6 driver work again, from Nicolas Dichtel.
9) Off-by-one in mlx4, from Sebastian Ott.
10) Fix fallback route lookup handling in ipv6, from Vincent Bernat.
11) Fix stack corruption on probe in qed driver, from Yuval Mintz.
12) PHY init fixes in r8152 from Hayes Wang.
13) Missing SKB free in irda_accept error path, from Phil Turnbull"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits)
tcp: properly account Fast Open SYN-ACK retrans
tcp: fix under-accounting retransmit SNMP counters
MAINTAINERS: Update b44 maintainer.
net: get rid of an signed integer overflow in ip_idents_reserve()
net/mlx4_core: Fix to clean devlink resources
net: can: ifi: Configure transmitter delay
vti6: fix input path
ipmr, ip6mr: return lastuse relative to now
r8152: disable ALDPS and EEE before setting PHY
r8152: remove r8153_enable_eee
r8152: move PHY settings to hw_phy_cfg
r8152: move enabling PHY
r8152: move some functions
cxgb4/cxgb4vf: Allocate more queues for 25G and 100G adapter
qed: Fix stack corruption on probe
MAINTAINERS: Add an entry for the core network DSA code
net: ipv6: fallback to full lookup if table lookup is unsuitable
net/mlx5: E-Switch, Handle mode change failures
net/mlx5: E-Switch, Fix error flow in the SRIOV e-switch init code
net/mlx5: Fix flow counter bulk command out mailbox allocation
...
Workqueues shouldn't be freed. destroy_workqueue should be used instead.
destroy_workqueue safely destroys a workqueue and ensures that all pending
work items are done before destroying the workqueue.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
if specified DVB-C bandwidth not supported then force 8MHz.
Should work for most cases.
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add these options as module parameters for now; should other drivers
need similar options we could add it to the LIRC api.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This is a duplicate of the timeout in rc_dev.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
