This driver is no longer necessary since it was merged into stmmac.
Acked-by: Lars Persson <larper@axis.com>
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull crypto fix from Herbert Xu:
"This fixes a regression in aesni that renders it useless if it's
built-in with a modular pcbc configuration"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: aesni - Fix failure when built-in with modular pcbc
Pull networking fixes from David Miller:
1) Fix dumping of nft_quota entries, from Pablo Neira Ayuso.
2) Fix out of bounds access in nf_tables discovered by KASAN, from
Florian Westphal.
3) Fix IRQ enabling in dp83867 driver, from Grygorii Strashko.
4) Fix unicast filtering in be2net driver, from Ivan Vecera.
5) tg3_get_stats64() can race with driver close and ethtool
reconfigurations, fix from Michael Chan.
6) Fix error handling when pass limit is reached in bpf code gen on
x86. From Daniel Borkmann.
7) Don't clobber switch ops and use proper MDIO nested reads and writes
in bcm_sf2 driver, from Florian Fainelli.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits)
net: dsa: bcm_sf2: Utilize nested MDIO read/write
net: dsa: bcm_sf2: Do not clobber b53_switch_ops
net: stmmac: fix maxmtu assignment to be within valid range
bpf: change back to orig prog on too many passes
tg3: Fix race condition in tg3_get_stats64().
be2net: fix unicast list filling
be2net: fix accesses to unicast list
netlabel: add CALIPSO to the list of built-in protocols
vti6: fix device register to report IFLA_INFO_KIND
net: phy: dp83867: fix irq generation
amd-xgbe: Fix IRQ processing when running in single IRQ mode
sh_eth: R8A7740 supports packet shecksumming
sh_eth: fix EESIPR values for SH77{34|63}
r8169: fix the typo in the comment
nl80211: fix sched scan netlink socket owner destruction
bridge: netfilter: Fix dropping packets that moving through bridge interface
netfilter: ipt_CLUSTERIP: check duplicate config when initializing
netfilter: nft_payload: mangle ckecksum if NFT_PAYLOAD_L4CSUM_PSEUDOHDR is set
netfilter: nf_tables: fix oob access
netfilter: nft_queue: use raw_smp_processor_id()
...
If after too many passes still no image could be emitted, then
swap back to the original program as we do in all other cases
and don't use the one with blinding.
Fixes: 959a757916 ("bpf, x86: add support for constant blinding")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even if no_bd_ram property is described in TI CPSW bindings the support for
it has never been introduced in CPSW driver, so there are no real users of
it. Hence, remove no_bd_ram property from documentation and DT files.
Cc: 'Rob Herring <robh+dt@kernel.org>'
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MIPS: (both for stable)
- fix host kernel crashes when receiving a signal with 64-bit userspace
- flush instruction cache on all vcpus after generating entry code
x86:
- fix NULL dereference in MMU caused by SMM transitions (for stable)
- correct guest instruction pointer after emulating some VMX errors
- minor cleanup
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJYb/N7AAoJEED/6hsPKofoa4QH/0/jwHr64lFeiOzMxqZfTF0y
wufcTqw3zGq5iPaNlEwn+6AkKnTq2IPws92FludfPHPb7BrLUPqrXxRlSRN+XPVw
pHVcV9u0q4yghMi7/6Flu3JASnpD6PrPZ7ezugZwgXFrR7pewd/+sTq6xBUnI9rZ
nNEYsfh8dYiBicxSGXlmZcHLuJJHKshjsv9F6ngyBGXAAf/F+nLiJReUzPO0m2+P
gmXi5zhVu6z05zlaCW1KAmJ1QV1UJla1vZnzrnK3twRK/05l7YX+xCbHIo1wB03R
2YhKDnSrnG3Zt+KpXfRhADXazNgM5ASvORdvI6RvjLNVxlnOveQtAcfRyvZezT4=
=LXLf
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"MIPS:
- fix host kernel crashes when receiving a signal with 64-bit
userspace
- flush instruction cache on all vcpus after generating entry code
(both for stable)
x86:
- fix NULL dereference in MMU caused by SMM transitions (for stable)
- correct guest instruction pointer after emulating some VMX errors
- minor cleanup"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: remove duplicated declaration
KVM: MIPS: Flush KVM entry code from icache globally
KVM: MIPS: Don't clobber CP0_Status.UX
KVM: x86: reset MMU on KVM_SET_VCPU_EVENTS
KVM: nVMX: fix instruction skipping during emulated vm-entry
Pull swiotlb fixes from Konrad Rzeszutek Wilk:
"This has one fix to make i915 work when using Xen SWIOTLB, and a
feature from Geert to aid in debugging of devices that can't do DMA
outside the 32-bit address space.
The feature from Geert is on top of v4.10 merge window commit
(specifically you pulling my previous branch), as his changes were
dependent on the Documentation/ movement patches.
I figured it would just easier than me trying than to cherry-pick the
Documentation patches to satisfy git.
The patches have been soaking since 12/20, albeit I updated the last
patch due to linux-next catching an compiler error and adding an
Tested-and-Reported-by tag"
* 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: Export swiotlb_max_segment to users
swiotlb: Add swiotlb=noforce debug option
swiotlb: Convert swiotlb_force from int to enum
x86, swiotlb: Simplify pci_swiotlb_detect_override()
Christmas break. Most of these are relatively unimportant fixes for
regressions introduced during the merge window, and about half of
the changes are for mach-omap2.
A couple of patches are just cleanups and dead code removal that I would
not normally have considered for merging after -rc2, but I decided to
take them along with the fixes this time.
Notable fixes include:
- removing the skeleton.dtsi include broke a number of machines, and we
have to put empty /chosen nodes back to be able to pass kernel command
lines as before
- enabling Samsung platforms no longer hardwires CONFIG_HZ to 200,
as it had been for no good reason for a long time.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=J2uq
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a rather large set of bugfixes, as we just returned from the
Christmas break. Most of these are relatively unimportant fixes for
regressions introduced during the merge window, and about half of the
changes are for mach-omap2.
A couple of patches are just cleanups and dead code removal that I
would not normally have considered for merging after -rc2, but I
decided to take them along with the fixes this time.
Notable fixes include:
- removing the skeleton.dtsi include broke a number of machines, and
we have to put empty /chosen nodes back to be able to pass kernel
command lines as before
- enabling Samsung platforms no longer hardwires CONFIG_HZ to 200, as
it had been for no good reason for a long time"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits)
MAINTAINERS: extend PSCI entry to cover the newly add PSCI checker code
drivers: psci: annotate timer on stack to silence odebug messages
ARM64: defconfig: enable DRM_MESON as module
ARM64: dts: meson-gx: Add Graphic Controller nodes
ARM64: dts: meson-gxl: fix GPIO include
ARM: dts: imx6: Disable "weim" node in the dtsi files
ARM: dts: qcom: apq8064: Add missing scm clock
ARM: davinci: da8xx: Fix sleeping function called from invalid context
ARM: davinci: Make __clk_{enable,disable} functions public
ARM: davinci: da850: don't add emac clock to lookup table twice
ARM: davinci: da850: fix infinite loop in clk_set_rate()
ARM: i.MX: remove map_io callback
ARM: dts: vf610-zii-dev-rev-b: Add missing newline
ARM: dts: imx6qdl-nitrogen6x: remove duplicate iomux entry
ARM: dts: imx31: fix AVIC base address
ARM: dts: am572x-idk: Add gpios property to control PCIE_RESETn
arm64: dts: vexpress: Support GICC_DIR operations
ARM: dts: vexpress: Support GICC_DIR operations
firmware: arm_scpi: fix reading sensor values on pre-1.0 SCPI firmwares
arm64: dts: msm8996: Add required memory carveouts
...
- small fixes for xenbus driver
- one fix for xen dom0 boot on huge system
- small cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJYbgWzAAoJELDendYovxMvzqQH/iO+SKCrT39q6fCP+fyov7Hi
J67XrHVT/AAPUXizWzKdtBE5EdI+WZXBkdsCEh3+3XPCeCRL/t9dRYEytle0Ioy9
hXC5otiJQ1hhm2N5dQKT5c0IMVh9mAjbeIqcG2dV1lSVaw0CYcJS4xh9eALxj7UY
eXGpNMdNyeiEG2p5OgnDE5GqHavxPh+6ChNxmr8341T8E+C9U1BNtJeUiIQshKmC
YAlt7YWoPzEJeLAYEiwrROYNyrLNd17IlYOeKXSwZUdkVtZahW+/jO+YYmhbx1C/
Yvt93r7ewUFKslRgpZQjjl8y9eynKg+j2BWx8WjAwpdHfCa1DFEOxiAOraLp7Cc=
=ro0H
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes and cleanups from Juergen Gross:
- small fixes for xenbus driver
- one fix for xen dom0 boot on huge system
- small cleanups
* tag 'for-linus-4.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Xen: ARM: Zero reserved fields of xatp before making hypervisor call
xen: events: Replace BUG() with BUG_ON()
xen: remove stale xs_input_avail() from header
xen: return xenstore command failures via response instead of rc
xen: xenbus driver must not accept invalid transaction ids
xen/evtchn: use rb_entry()
xen/setup: Don't relocate p2m over existing one
Declaration of VMX_VPID_EXTENT_SUPPORTED_MASK occures twice in the code.
Probably, it was happened after unsuccessful merge.
Signed-off-by: Jan Dakinevich <jan.dakinevich@gmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Flush the KVM entry code from the icache on all CPUs, not just the one
that built the entry code.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.16.x-
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
On 64-bit kernels, MIPS KVM will clear CP0_Status.UX to prevent the
guest (running in user mode) from accessing the 64-bit memory segments.
However the previous value of CP0_Status.UX is never restored when
exiting from the guest.
If the user process uses 64-bit addressing (the n64 ABI) this can result
in address error exceptions from the kernel if it needs to deliver a
signal before returning to user mode, as the kernel will need to write a
sigframe to high user addresses on the user stack which are disallowed
by CP0_Status.UX=0.
This is fixed by explicitly setting SX and UX again when exiting from
the guest, and explicitly clearing those bits when returning to the
guest. Having the SX and UX bits set when handling guest exits (rather
than only when exiting to userland) will be helpful when we support VZ,
since we shouldn't need to directly read or write guest memory, so it
will be valid for cache management IPIs to access host user addresses.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Cc: <stable@vger.kernel.org> # 4.8.x-
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Commit c02433dd6d ("arm64: split thread_info from task stack")
inverted the relationship between get_current() and
current_thread_info(), with sp_el0 now holding the current task_struct
rather than the current thead_info. The new implementation of
get_current() prevents the compiler from being able to optimize repeated
calls to either, resulting in a noticeable penalty in some
microbenchmarks.
This patch restores the previous optimisation by implementing
get_current() in the same way as our old current_thread_info(), using a
non-volatile asm statement.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Recent changes made KERN_CONT mandatory for continued lines. In the
absence of KERN_CONT, a newline may be implicit inserted by the core
printk code.
In show_pte, we (erroneously) use printk without KERN_CONT for continued
prints, resulting in output being split across a number of lines, and
not matching the intended output, e.g.
[ff000000000000] *pgd=00000009f511b003
, *pud=00000009f4a80003
, *pmd=0000000000000000
Fix this by using pr_cont() for all the continuations.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
1) Fix two instances of infinite loop occurring in
clock list for DA850. This fixes kernel hangs in some
instances and so have been marked for stable kernel.
2) Fix for sleeping function called from atomic context
with USB 2.0 clock management code introduced in v4.10
merge window.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mX5P
-----END PGP SIGNATURE-----
Merge tag 'davinci-fixes-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
Pull "DaVinci fixes for v4.10" from Sekhar Nori:
This pull request contains fixes for the following issues
1) Fix two instances of infinite loop occurring in
clock list for DA850. This fixes kernel hangs in some
instances and so have been marked for stable kernel.
2) Fix for sleeping function called from atomic context
with USB 2.0 clock management code introduced in v4.10
merge window.
* tag 'davinci-fixes-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: da8xx: Fix sleeping function called from invalid context
ARM: davinci: Make __clk_{enable,disable} functions public
ARM: davinci: da850: don't add emac clock to lookup table twice
ARM: davinci: da850: fix infinite loop in clk_set_rate()
- DT: GXL: fix GPIO include
- add DT and defconfig for newly merged DRM driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=7ngo
-----END PGP SIGNATURE-----
Merge tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes
Pull "Amlogic fixes for v4.10" from Kevin Hilman:
- DT: GXL: fix GPIO include
- add DT and defconfig for newly merged DRM driver
This pull has one real fix, as a couple non-critical ones. The DRM
DT/defconfig patches are coming now because I didn't expect the new
driver to make it for the v4.10 merge window, but since it did[1], the
DT and defconfig should go into the same release.
[1] bbbe775ec5 drm: Add support for Amlogic Meson Graphic Controller
* tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM64: defconfig: enable DRM_MESON as module
ARM64: dts: meson-gx: Add Graphic Controller nodes
ARM64: dts: meson-gxl: fix GPIO include
A simple fix to extend GICv2 CPU interface registers from 4K to 8K
on AEMv8 FVP/RTSM models in order to support split priority drop and
interrupt deactivation.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=BoKJ
-----END PGP SIGNATURE-----
Merge tag 'juno-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into fixes
Pull "ARMv8 Juno/VExpress fixes for v4.10" from Sudeep Holla:
A simple fix to extend GICv2 CPU interface registers from 4K to 8K
on AEMv8 FVP/RTSM models in order to support split priority drop and
interrupt deactivation.
* tag 'juno-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: vexpress: Support GICC_DIR operations
A simple fix to extend GICv2 CPU interface registers from 4K to 8K
on VExpress TC1 and TC2 platforms in order to support split priority
drop and interrupt deactivation.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Li+r
-----END PGP SIGNATURE-----
Merge tag 'vexpress-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into fixes
Pull "ARMv7 VExpress fixes for v4.10" from Sudeep Holla:
A simple fix to extend GICv2 CPU interface registers from 4K to 8K
on VExpress TC1 and TC2 platforms in order to support split priority
drop and interrupt deactivation.
* tag 'vexpress-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
ARM: dts: vexpress: Support GICC_DIR operations
- A format fix for vf610-zii-dev-rev-b.dts, which has a very odd line
due to misses a newline.
- A fix to imx-weim bus error seen on board which doesn't actually use
the bus.
- A fix for imx6qdl-nitrogen6x board which has conflicting usage of
pad NANDF_CS2.
- A cleanup on i.MX1 machine to remove .map_io callback, which also
fixes a compiling error for NOMMU build.
- Fix AVIC base address in i.MX31 device tree source. The problem was
shadowed by the AVIC driver, which takes the correct base address
from a SoC specific header file.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYa159AAoJEFBXWFqHsHzOPyoIAKTnMpuzSxg0685wusE3F/t2
wQBMi4ZkHmEYOMvNx5r+7XyjuCNWhU8Wnl3S8Dz9pgpHN+1otC9NbhjSlOVNtNI0
3pIb8UXNRbBLweE4L5FdIAsm8u+cjeHxxuuww/CaKg9g2mSiskRis2V3wRqk/0ch
1/W+bk4fAzITO9GsPGTD/pT7eRQcxZ8yW4fowjTm8/PJ5TSwpcsD24nXHVgLhQHf
1VS/HwxdrWVC2WweWY32ENToNCVeMxLLVmMjOu7W4iGDeO7QyES7E4f/lMD446Wy
SYu223pMCa5xNEzTpj22acY+BB3dnqU/s07ILaGjXxvdUN2ioN+IN0wVIgYvOt8=
=a44g
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
Pull "i.MX fixes for 4.10" from Shawn Guo:
- A format fix for vf610-zii-dev-rev-b.dts, which has a very odd line
due to misses a newline.
- A fix to imx-weim bus error seen on board which doesn't actually use
the bus.
- A fix for imx6qdl-nitrogen6x board which has conflicting usage of
pad NANDF_CS2.
- A cleanup on i.MX1 machine to remove .map_io callback, which also
fixes a compiling error for NOMMU build.
- Fix AVIC base address in i.MX31 device tree source. The problem was
shadowed by the AVIC driver, which takes the correct base address
from a SoC specific header file.
* tag 'imx-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6: Disable "weim" node in the dtsi files
ARM: i.MX: remove map_io callback
ARM: dts: vf610-zii-dev-rev-b: Add missing newline
ARM: dts: imx6qdl-nitrogen6x: remove duplicate iomux entry
ARM: dts: imx31: fix AVIC base address
to deal with various regressions noticed during the merge
window and to fix various device tree configurations for
boards. Also included is removal of mach-omap2/gpio.c that
is now dead code with device tree based booting that should
be OK for the early -rc cycle:
- A series of fixes to add empty chosen node to fix regressions
caused for bootloaders that don't create chosen node as the
decompressor needs the chosen node to merge command line and
ATAGs into it
- Fix missing logicpd-som-lv-37xx-devkit.dtb entry in Makefile
- Fix regression for am437x timers
- Fix wrong strcat for non-NULL terminated string
- A series of changes to fix tps65217 interrupts to not use
defines as we don't do that for interrupts
- Two patches to fix USB VBUS detection on am57xx-idk and force it
to peripheral mode until dwc3 role detection is working
- Add missing dra72-evm-tps65917 missing voltage supplies
accidentally left out of an earlier patch
- Fix n900 eMMC detection when booted on qemu
- Remove unwanted pr_err on failed memory allocation for
prm_common.c
- Remove legacy mach-omap2/gpio.c that now is dead code
since we boot mach-omap2 in device tree only mode
- Fix am572x-idk pcie1 by adding the missing gpio reset pin
-----BEGIN PGP SIGNATURE-----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=UNWK
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.10/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Pull "omap fixes for v4.10-rc cycle" from Tony Lindgren:
Fist set of fixes for omaps for v4.10-rc cycle, mostly
to deal with various regressions noticed during the merge
window and to fix various device tree configurations for
boards. Also included is removal of mach-omap2/gpio.c that
is now dead code with device tree based booting that should
be OK for the early -rc cycle:
- A series of fixes to add empty chosen node to fix regressions
caused for bootloaders that don't create chosen node as the
decompressor needs the chosen node to merge command line and
ATAGs into it
- Fix missing logicpd-som-lv-37xx-devkit.dtb entry in Makefile
- Fix regression for am437x timers
- Fix wrong strcat for non-NULL terminated string
- A series of changes to fix tps65217 interrupts to not use
defines as we don't do that for interrupts
- Two patches to fix USB VBUS detection on am57xx-idk and force it
to peripheral mode until dwc3 role detection is working
- Add missing dra72-evm-tps65917 missing voltage supplies
accidentally left out of an earlier patch
- Fix n900 eMMC detection when booted on qemu
- Remove unwanted pr_err on failed memory allocation for
prm_common.c
- Remove legacy mach-omap2/gpio.c that now is dead code
since we boot mach-omap2 in device tree only mode
- Fix am572x-idk pcie1 by adding the missing gpio reset pin
* tag 'omap-for-v4.10/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (23 commits)
ARM: dts: am572x-idk: Add gpios property to control PCIE_RESETn
ARM: OMAP2+: PRM: Delete an error message for a failed memory allocation
ARM: dts: n900: Mark eMMC slot with no-sdio and no-sd flags
ARM: dts: dra72-evm-tps65917: Add voltage supplies to usb_phy, mmc, dss
ARM: dts: am57xx-idk: Put USB2 port in peripheral mode
ARM: dts: am57xx-idk: Support VBUS detection on USB2 port
dt-bindings: input: Specify the interrupt number of TPS65217 power button
dt-bindings: power/supply: Update TPS65217 properties
dt-bindings: mfd: Remove TPS65217 interrupts
ARM: dts: am335x: Fix the interrupt name of TPS65217
ARM: omap2+: fixing wrong strcat for Non-NULL terminated string
ARM: omap2+: am437x: rollback to use omap3_gptimer_timer_init()
ARM: dts: omap3: Add DTS for Logic PD SOM-LV 37xx Dev Kit
ARM: dts: dra7: Add an empty chosen node to top level DTSI
ARM: dts: dm816x: Add an empty chosen node to top level DTSI
ARM: dts: dm814x: Add an empty chosen node to top level DTSI
ARM: dts: am4372: Add an empty chosen node to top level DTSI
ARM: dts: am33xx: Add an empty chosen node to top level DTSI
ARM: dts: omap5: Add an empty chosen node to top level DTSI
ARM: dts: omap4: Add an empty chosen node to top level DTSI
...
1. Minor cleanup in smp_operations.
2. Another step in switching s3c24xx to new DMA API.
3. Drop fixed requirement for HZ=200 on Samsung platforms.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=TAfi
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into fixes
Samsung mach/soc update for v4.10:
1. Minor cleanup in smp_operations.
2. Another step in switching s3c24xx to new DMA API.
3. Drop fixed requirement for HZ=200 on Samsung platforms.
* tag 'samsung-soc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: Drop fixed 200 Hz timer requirement from Samsung platforms
ARM: S3C24XX: Add DMA slave maps for remaining s3c24xx SoCs
ARM: EXYNOS: Remove smp_init_cpus hook from platsmp.c
* Provide sd0_uhs node
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=XZkS
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes-for-v4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Renesas ARM Based SoC Fixes for v4.10
* Provide sd0_uhs node
* tag 'renesas-fixes-for-v4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: h3ulcb: Provide sd0_uhs node
Pull parisc updates from Helge Deller:
- limit usage of processor-internal cr16 clocksource to UP systems only
- segfault info lines in syslog were too long, split those up
- drop own TIF_RESTORE_SIGMASK flag and switch to generic code
* 'parisc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Add line-break when printing segfault info
parisc: Drop TIF_RESTORE_SIGMASK and switch to generic code
parisc: Mark cr16 clocksource unstable on SMP systems
Add Video Processing Unit and CVBS Output nodes, and enable CVBS on selected
boards.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Commit 1be81ea586 ("ARM: dts: imx6: Add imx-weim parameters to
dtsi's") causes the following probe error when the weim node is not
present on the board dts (such as imx6q-sabresd):
imx-weim 21b8000.weim: Invalid 'ranges' configuration
imx-weim: probe of 21b8000.weim failed with error -22
There is no need to always enable the "weim" node on mx6. Do the same
as in the other i.MX dtsi files where "weim" is disabled and only gets
enabled on a per dts basis.
All the imx6 weim dts users explicitily provide 'status = "okay"', so
this change has no impact on current imx6 weim users.
If a board does not use the weim driver it will not describe its 'ranges'
property, so simply disable the 'weim' node in the imx6 dtsi files to
avoid such probe error message.
Fixes: 1be81ea586 ("ARM: dts: imx6: Add imx-weim parameters to dtsi's")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull s390 fixes from Martin Schwidefsky:
"Two bug fixes for 4.10-rc3"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/kbuild: enable modversions for symbols exported from asm
s390/vtime: correct system time accounting
-----BEGIN PGP SIGNATURE-----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=iHr1
-----END PGP SIGNATURE-----
Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linux
Pull Openrisc fix from Stafford Horne:
"There was nothing much interesting here except a build fix pointed out
by the test robots. Highlight:
- Defined _text symbol to fix build error"
* tag 'openrisc-for-linus' of git://github.com/openrisc/linux:
openrisc: Add _text symbol to fix ksym build error
As per the device tree binding the apq8064 scm node requires the core
clock to be specified, so add this.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Everytime the usb20 phy is enabled, there is a
"sleeping function called from invalid context" BUG.
In addition, there is a recursive locking happening
because of the recurse call to clk_enable().
clk_enable() from arch/arm/mach-davinci/clock.c uses
spin_lock_irqsave() before to invoke the callback
usb20_phy_clk_enable(). usb20_phy_clk_enable() uses
clk_get() and clk_enable_prepapre() which may sleep.
Replace clk_prepare_enable() by davinci_clk_enable().
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Suggested-by: David Lechner <david@lechnology.com>
[nsekhar@ti.com: minor commit description adjustment]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
In some cases, there is a need to enable a clock as part of
clock enable callback of a different clock. For example, USB
2.0 PHY clock enable requires USB 2.0 clock to be enabled.
In this case, it is safe to instead call __clk_enable()
since the clock framework lock is already taken. Calling
clk_enable() causes recursive locking error.
A similar case arises in the clock disable path.
To enable such usage, make __clk_{enable,disable} functions
publicly available outside of clock.c. Also, call them
davinci_clk_{enable|disable} now to be consistent with how
other davinci-specific clock functions are named.
Note that these functions are not exported to drivers. They
are meant for usage in platform specific clock management
code.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Suggested-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Similarly to the aemif clock - this screws up the linked list of clock
children. Create a separate clock for mdio inheriting the rate from
emac_clk.
Cc: <stable@vger.kernel.org> # 3.12.x-
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[nsekhar@ti.com: add a comment over mdio_clk to explaing its existence +
commit headline updates]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The aemif clock is added twice to the lookup table in da850.c. This
breaks the children list of pll0_sysclk3 as we're using the same list
links in struct clk. When calling clk_set_rate(), we get stuck in
propagate_rate().
Create a separate clock for nand, inheriting the rate of the aemif
clock and retrieve it in the davinci_nand module.
Cc: <stable@vger.kernel.org> # 4.9.x
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
There is no need to define map_io only for debug_ll_io_init() since it
is already called in devicemaps_init() if map_io is NULL.
Apart from that, for NOMMU build debug_ll_io_init() is a nop which
leads to following error:
CC arch/arm/mach-imx/mach-imx1.o
arch/arm/mach-imx/mach-imx1.c:40:13: error: 'debug_ll_io_init' undeclared here (not in a function)
.map_io = debug_ll_io_init,
^
make[1]: *** [arch/arm/mach-imx/mach-imx1.o] Error 1
Cc: Alexander Shiyan <shc_work@mail.ru>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Found while reviewing Marvell dsa bindings usage.
Fixes: f283745b3c ("arm: vf610: zii devel b: Add support for switch interrupts")
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The NANDF_CS2 pad is also part of the wlan-vmmcgrp iomux group.
Removing is from the usdhc2grp group avoids the following error:
imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_NANDF_CS2 already requested
by regulators:regulator@4; cannot claim for 2194000.usdhc
imx6q-pinctrl 20e0000.iomuxc: pin-187 (2194000.usdhc) status -22
imx6q-pinctrl 20e0000.iomuxc: could not request pin 187
(MX6Q_PAD_NANDF_CS2) from group usdhc2grp on device 20e0000.iomuxc
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On i.MX31 AVIC interrupt controller base address is at 0x68000000.
The problem was shadowed by the AVIC driver, which takes the correct
base address from a SoC specific header file.
Fixes: d2a37b3d91 ("ARM i.MX31: Add devicetree support")
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The build robot reports:
.tmp_kallsyms1.o: In function `kallsyms_relative_base':
>> (.rodata+0x8a18): undefined reference to `_text'
This is when using 'make alldefconfig'. Adding this _text symbol to mark
the start of the kernel as in other architecture fixes this.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Acked-by: Jonas Bonn <jonas@southpole.se>
Add 'gpios' property to pcie1 dt node and populate it with
GPIO3_23 in order to drive PCIE_RESETn high.
This gets PCIe cards to be detected in AM572X IDK board.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The GICv2 CPU interface registers span across 8K, not 4K as indicated in
the DT. Only the GICC_DIR register is located after the initial 4K
boundary, leaving a functional system but without support for separately
EOI'ing and deactivating interrupts.
After this change the system supports split priority drop and interrupt
deactivation. This patch is based on similar one from Christoffer Dall:
commit 368400e242 ("ARM: dts: vexpress: Support GICC_DIR operations")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The GICv2 CPU interface registers span across 8K, not 4K as indicated in
the DT. Only the GICC_DIR register is located after the initial 4K
boundary, leaving a functional system but without support for separately
EOI'ing and deactivating interrupts.
After this change the system supports split priority drop and interrupt
deactivation.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
[sudeep.holla@arm.com: included same fix for tc1 platform too]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
If aesni is built-in but pcbc is built as a module, then aesni
will fail completely because when it tries to register the pcbc
variant of aes the pcbc template is not available.
This patch fixes this by modifying the pcbc presence test so that
if aesni is built-in then pcbc must also be built-in for it to be
used by aesni.
Fixes: 85671860ca ("crypto: aesni - Convert to skcipher")
Reported-by: Stephan Müller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 7e7814180b ("signal: consolidate {TS,TLF}_RESTORE_SIGMASK code")
introduced code with which the "restore sigmask" flag lives in task_struct
instead of ti->flags. Let's use this optimization on parisc too.
Signed-off-by: Helge Deller <deller@gmx.de>
