Just like ext3 we now have three sets of address space operations
to cover the cases of writeback, ordered and journalled data
writes. This means that the individual operations can now become
less complicated as we are able to remove some of the tests for
file data mode from the code.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This adds a function "gfs2_is_writeback()" along the lines of the
existing "gfs2_is_jdata()" in order to clean up the code and make
the various tests for the inode mode more obvious. It also fixes
the PageChecked() logic where we were resetting the flag too early
in the case of an error path.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The i_cache was designed to keep references to the indirect blocks
used during block mapping so that they didn't have to be looked
up continually. The idea failed because there are too many places
where the i_cache needs to be freed, and this has in the past been
the cause of many bugs.
In addition there was no performance benefit being gained since the
disk blocks in question were cached anyway. So this patch removes
it in order to simplify the code to prepare for other changes which
would otherwise have had to add further support for this feature.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This cleans up the mmap() code path for GFS2 by implementing the
page_mkwrite function for GFS2. We are thus able to use the
generic filemap_fault function for our ->fault() implementation.
This now means that shared writable mappings will be much more
efficiently shared across the cluster if there is a reasonable
proportion of read activity (the greater proportion, the better).
As a side effect, it also reduces the size of the code, removes
special cases from readpage and readpages, and makes the code
path easier to follow.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As requested by Christoph, this patch cleans up GFS2's internal
read function so that it no longer uses the do_generic_mapping_read
function. This function is obsolete and GFS2 is the last user of it.
As a side effect the internal read code gets smaller and easier
to read and gfs2_readpage is split into two. One function has the locking
and the other function has the rest of the logic.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Fix a race condition where multiple glock demote requests are sent to
a node back-to-back. This patch does a check inside handle_callback()
to see whether a demote request is in progress. If true, it sets a flag
to make sure run_queue() will loop again to handle the new request,
instead of erronously setting gl_demote_state to a different state.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
There is no need for kobject_unregister() anymore, thanks to Kay's
kobject cleanup changes, so replace all instances of it with
kobject_put().
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kernel_kset does not need to be a kset, but a much simpler kobject now
that we have kobj_attributes.
We also rename kernel_kset to kernel_kobj to catch all users of this
symbol with a build error instead of an easy-to-ignore build warning.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dynamically create the kset instead of declaring it statically. We also
rename kernel_subsys to kernel_kset to catch all users of this symbol
with a build error instead of an easy-to-ignore build warning.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dynamically create the kset instead of declaring it statically.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dynamically create the kset instead of declaring it statically.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This also renames fs_subsys to fs_kobj to catch all current users with a
build error instead of a build warning which can easily be missed.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We don't need a "default" ktype for a kset. We should set this
explicitly every time for each kset. This change is needed so that we
can make ksets dynamic, and cleans up one of the odd, undocumented
assumption that the kset/kobject/ktype model has.
This patch is based on a lot of help from Kay Sievers.
Nasty bug in the block code was found by Dave Young
<hidave.darkstar@gmail.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that nfsd has stopped writing to the find_exported_dentry member we an
mark the export_operations const
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: <linux-ext4@vger.kernel.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: David Chinner <dgc@sgi.com>
Cc: Timothy Shimmin <tes@sgi.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Chris Mason <mason@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: "Vladimir V. Saveliev" <vs@namesys.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert gfs2 to the new ops. Uses a similar structure to the generic helpers,
but gfs2 has it's own file handle formats.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The early LFS work that Linux uses favours EFBIG in various places. SuSv3
specifically uses EOVERFLOW for this as noted by Michael (Bug 7253)
[EOVERFLOW]
The named file is a regular file and the size of the file cannot be
represented correctly in an object of type off_t. We should therefore
transition to the proper error return code
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Slab constructors currently have a flags parameter that is never used. And
the order of the arguments is opposite to other slab functions. The object
pointer is placed before the kmem_cache pointer.
Convert
ctor(void *object, struct kmem_cache *s, unsigned long flags)
to
ctor(struct kmem_cache *s, void *object)
throughout the kernel
[akpm@linux-foundation.org: coupla fixes]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'locks' of git://linux-nfs.org/~bfields/linux:
nfsd: remove IS_ISMNDLCK macro
Rework /proc/locks via seq_files and seq_list helpers
fs/locks.c: use list_for_each_entry() instead of list_for_each()
NFS: clean up explicit check for mandatory locks
AFS: clean up explicit check for mandatory locks
9PFS: clean up explicit check for mandatory locks
GFS2: clean up explicit check for mandatory locks
Cleanup macros for distinguishing mandatory locks
Documentation: move locks.txt in filesystems/
locks: add warning about mandatory locking races
Documentation: move mandatory locking documentation to filesystems/
locks: Fix potential OOPS in generic_setlease()
Use list_first_entry in locks_wake_up_blocks
locks: fix flock_lock_file() comment
Memory shortage can result in inconsistent flocks state
locks: kill redundant local variable
locks: reverse order of posix_locks_conflict() arguments
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (75 commits)
PM: merge device power-management source files
sysfs: add copyrights
kobject: update the copyrights
kset: add some kerneldoc to help describe what these strange things are
Driver core: rename ktype_edd and ktype_efivar
Driver core: rename ktype_driver
Driver core: rename ktype_device
Driver core: rename ktype_class
driver core: remove subsystem_init()
sysfs: move sysfs file poll implementation to sysfs_open_dirent
sysfs: implement sysfs_open_dirent
sysfs: move sysfs_dirent->s_children into sysfs_dirent->s_dir
sysfs: make sysfs_root a regular directory dirent
sysfs: open code sysfs_attach_dentry()
sysfs: make s_elem an anonymous union
sysfs: make bin attr open get active reference of parent too
sysfs: kill unnecessary NULL pointer check in sysfs_release()
sysfs: kill unnecessary sysfs_get() in open paths
sysfs: reposition sysfs_dirent->s_mode.
sysfs: kill sysfs_update_file()
...
A kset should not have its name set directly, so dynamically set the
name at runtime.
This is needed to remove the static array in the kobject structure which
will be changed in a future patch.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (51 commits)
[DLM] block dlm_recv in recovery transition
[DLM] don't overwrite castparam if it's NULL
[GFS2] Get superblock a different way
[GFS2] Don't try to remove buffers that don't exist
[GFS2] Alternate gfs2_iget to avoid looking up inodes being freed
[GFS2] Data corruption fix
[GFS2] Clean up journaled data writing
[GFS2] GFS2: chmod hung - fix race in thread creation
[DLM] Make dlm_sendd cond_resched more
[GFS2] Move inode deletion out of blocking_cb
[GFS2] flocks from same process trip kernel BUG at fs/gfs2/glock.c:1118!
[GFS2] Clean up gfs2_trans_add_revoke()
[GFS2] Use slab operations for all gfs2_bufdata allocations
[GFS2] Replace revoke structure with bufdata structure
[GFS2] Fix ordering of dirty/journal for ordered buffer unstuffing
[GFS2] Clean up ordered write code
[GFS2] Move pin/unpin into lops.c, clean up locking
[GFS2] Don't mark jdata dirty in gfs2_unstuffer_page()
[GFS2] Introduce gfs2_remove_from_ail
[GFS2] Correct lock ordering in unlink
...
The mapping may be NULL by the time the I/O has completed, so
we now get the superblock by a different route (via the bd and glock)
to avoid this problem.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Wendy Cheng <wcheng@redhat.com>
There is a possible deadlock between two processes on the same node, where one
process is deleting an inode, and another process is looking for allocated but
unused inodes to delete in order to create more space.
process A does an iput() on inode X, and it's i_count drops to 0. This causes
iput_final() to be called, which puts an inode into state I_FREEING at
generic_delete_inode(). There no point between when iput_final() is called, and
when I_FREEING is set where GFS2 could acquire any glocks. Once I_FREEING is
set, no other process on that node can successfully look up that inode until
the delete finishes.
process B locks the the resource group for the same inode in get_local_rgrp(),
which is called by gfs2_inplace_reserve_i()
process A tries to lock the resource group for the inode in
gfs2_dinode_dealloc(), but it's already locked by process B
process B waits in find_inode for the inode to have the I_FREEING state cleared.
Deadlock.
This patch solves the problem by adding an alternative to gfs2_iget(),
gfs2_iget_skip(), that simply skips any inodes that are in the I_FREEING
state.o The alternate test function is just like the original one, except that
it fails if the inode is being freed, and sets a skipped flag. The alternate
set function is just like the original, except that it fails if the skipped
flag is set. Only try_rgrp_unlink() calls gfs2_iget_skip() instead of
gfs2_iget().
Signed-off-by: Benjamin E. Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* GFS2 has been using i_cache array to store its indirect meta blocks.
Its flush routine doesn't correctly clean up all the entries. The
problem would show while multiple nodes do simultaneous writes to the
same file. Upon glock exclusive lock transfer, if the file is a sparse
file with large file size where the indirect meta blocks span multiple
array entries with "zero" entries in between. The flush routine
prematurely stops the flushing that leaves old (stale) entries around.
This leads to several nasty issues, including data corruption.
* Fix gfs2_get_block_noalloc checking to correctly return EIO upon
unmapped buffer.
Signed-off-by: Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch cleans up the code for writing journaled data into the log.
It also removes the need to allocate a small "tag" structure for each
block written into the log. Instead we just keep count of the outstanding
I/O so that we can be sure that its all been written at the correct time.
Another result of this patch is that a number of ll_rw_block() calls
have become submit_bh() calls, closing some races at the same time.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The problem boiled down to a race between the gdlm_init_threads()
function initializing thread1 and its setting of blist = 1.
Essentially, "if (current == ls->thread1)" was checked by the thread
before the thread creator set ls->thread1.
Since thread1 is the only thread who is allowed to work on the
blocking queue, and since neither thread thought it was thread1, no one
was working on the queue. So everything just sat.
This patch reuses the ls->async_lock spin_lock to fix the race,
and it fixes the problem. I've done more than 2000 iterations of the
loop that was recreating the failure and it seems to work.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
--
Move inode deletion code out of blocking_cb handle_callback route to
avoid racy conditions that end up blocking lock_dlm1 thread. Fix
bugzilla 286821.
Signed-off-by: Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch adds a new flag to the gfs2_holder structure GL_FLOCK.
It is set on holders of glocks representing flocks. This flag is
checked in add_to_queue() and a process is permitted to queue more
than one holder onto a glock if it is set. This solves the issue
of a process not being able to do multiple flocks on the same file.
Through a single descriptor, a process can now promote and demote
flocks. Through multiple descriptors a process can now queue
multiple flocks on the same file. There's still the problem of
a process deadlocking itself (because gfs2 blocking locks are not
interruptible) by queueing incompatible deadlock.
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The following alters gfs2_trans_add_revoke() to take a struct
gfs2_bufdata as an argument. This eliminates the memory allocation which
was previously required by making use of the already existing struct
gfs2_bufdata. It makes some sanity checks to ensure that the
gfs2_bufdata has been removed from all the lists before its recycled as
a revoke structure. This saves one memory allocation and one free per
revoke structure.
Also as a result, and to simplify the locking, since there is no longer
any blocking code in gfs2_trans_add_revoke() we must hold the log lock
whenever this function is called. This reduces the amount of times we
take and unlock the log lock.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The old revoke structure was allocated using kalloc/kfree but
there is a slab cache for gfs2_bufdata, so we should use that
now that the structures have been converted.
This is part two of the patch series to merge the revoke
and gfs2_bufdata structures.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Both the revoke structure and the bufdata structure are quite similar.
They are basically small tags which are put on lists. In addition to
which the revoke structure is always allocated when there is a bufdata
structure which is (or can be) freed. As such it should be possible to
reduce the number of frees and allocations by using the same structure
for both purposes.
This patch is the first step along that path. It replaces existing uses
of the revoke structure with the bufdata structure.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The following patch removes the ordered write processing from
databuf_lo_before_commit() and moves it to log.c. This has the effect of
greatly simplyfying databuf_lo_before_commit() and well as potentially
making the ordered write code more efficient.
As a side effect of this, its now possible to remove ordered buffers
from the ordered buffer list at any time, so we now make use of this in
invalidatepage and releasepage to ensure timely release of these
buffers.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
gfs2_pin and gfs2_unpin are only used in lops.c, despite being
defined in meta_io.c, so this patch moves them into lops.c and
makes them static. At the same time, its possible to clean up
the locking in the buf and databuf _lo_add() functions so that
we only need to grab the spinlock once. Also we have to move
lock_buffer() around the _lo_add() functions since we can't
do that in gfs2_pin() any more since we hold the spinlock
for the duration of that function.
As a result, the code shrinks by 12 lines and we do far fewer
operations when adding buffers to the log. It also makes the
code somewhat easier to read & understand.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This collects together the operations required to remove a gfs2_bufdata
from the ail lists. Its only called from two places to start with, but
expect to see more of this function in future.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch corrects the lock ordering in unlink to be the same as
that in the rest of GFS2, i.e. parent -> child -> rgrp.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Fix a nasty inode meta data corruption issue by keeping the buffer head in
icache array. This buffer needs to stay in memory until journal flush occurs
Otherwise, gfs2_meta_inode_buffer could do a disk read before the inode hits
disk. It ends up with meta data corruptions. The buffer will be released as
part of the existing journal flush logic.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When a lot of IO, with some distributed mmap IO, is run on a GFS2 filesystem in
a cluster, it will deadlock. The reason is that do_no_page() will repeatedly
call gfs2_sharewrite_nopage(), because each node keeps giving up the glock
too early, and is forced to call unmap_mapping_range(). This bumps the
mapping->truncate_count sequence count, forcing do_no_page() to retry. This
patch institutes a minimum glock hold time a tenth a second. This insures
that even in heavy contention cases, the node has enough time to get some
useful work done before it gives up the glock.
A second issue is that when gfs2_glock_dq() is called from within a page fault
to demote a lock, and the associated page needs to be written out, it will
try to acqire a lock on it, but it has already been locked at a higher level.
This patch puts makes gfs2_glock_dq() use the work queue as well, to avoid this
issue. This is the same patch as Steve Whitehouse originally proposed to fix
this issue, execpt that gfs2_glock_dq() now grabs a reference to the glock
before it queues up the work on it.
Signed-off-by: Benjamin E. Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When you try to mount gfs2 with -o garbage, the mount fails and the gfs2
superblock is deallocated and becomes NULL. The vfs comes around later
on and calls gfs2_kill_sb. At this point the hidden gfs2 superblock
pointer (sb->s_fs_info) is NULL and dereferencing it through
gfs2_meta_syncfs causes the panic. (the other function call to
gfs2_delete_debugfs_file() succeeds because this function already checks
for a NULL pointer)
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is a patch to GFS2 to protect sd_log_num_jdata with the
gfs2_log_lock. Without this patch, there is a timing window
where you can get hit the following assert from function
gfs2_log_flush():
gfs2_assert_withdraw(sdp,
sdp->sd_log_num_buf + sdp->sd_log_num_jdata ==
sdp->sd_log_commited_buf +
sdp->sd_log_commited_databuf);
I've tested it on my roth cluster and it fixes the problem.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
With this patch, gfs2 glockdump through the debugfs filesystem will only
dump glocks for the specified filesystem instead of all glocks. Also, to
aid debugging, the glock number is dumped in hex instead of decimal.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Abhijith Das <adas@redhat.com>
Current GFS2 setattr call unconditionally invokes do_shrink even the
requested size and actual file size are equal. This has generated large
amount of extra IOs found during NFS benchmark runs. This patch moves
the relevant logic out of shrink code path. Since setattr is a system
call, the time stamps update is still required.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
match_token() was returning garbage data instead of a fail value. This data
happened to match a valid option id for an option that required an argument (in
this case, lockproto=%s) For match_token() to correctly fail if the option
doesn't match any of the tokens, the token table must end with a NULL entry.
This patch adds the NULL entry.
Signed-off-by: Benjamin E. Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This was missing from the dir_split_leaf() function although in
most cases its not a problem due to other functions having
already previously called gfs2_trans_add_bh. This makes certain
that it is correct.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Wendy Cheng <wcheng@redhat.com>
This patch fixes some bugs relating to journaled data files by cleaning
up the gfs2_invalidatepage() and gfs2_releasepage() functions. We now
never block during gfs2_releasepage(), instead we always either release
or refuse to release depending on the status of the buffers.
This fixes Red Hat bugzillas #248969 and #252392.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
This is the filesystem part of the patches to fix this bz. There are
additional userland patches (gfs2_quota, libgfs2) for the complete
solution. This patch adds a new field qu_ll_next to the gfs2_quota
structure. This field allows us to create linked lists of quotas in the
ondisk quota inode. Instead of scanning through the entire sparse quota
file for valid quotas, we can now simply walk through the user and group
quota linked lists to perform the do_list operation.
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch forcibly unstuffs (if stuffed) the hidden quota inode at the
first availble opportunity. In any practical scenario the quota inode
won't be stuffed, so this is ok to do. Unstuffing the quota inode allows
us to ignore the case of a stuffed quota inode in gfs2_adjust_quota().
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
the original code could work, but I think this code could work better.
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
sb->s_fs_info is a void pointer, thus the type cast is not needed.
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is for bugzilla bug #248176: GFS2: invalid metadata block
Patches 1 thru 3 were accepted upstream, but there were problems
with 4 and 5. Those issues have been resolved and now the recovery
tests are passing without errors. This code has gone through
41 * 3 successful gfs2 recovery tests before it hit an
unrelated (openais) problem. I'm continuing to test it.
This is a complete rewrite of patch 5 for bug #248176, written by
Steve Whitehouse. This is referred to in the bugzilla record as
"new 6" and "a different solution".
The problem was that the journal inodes, although protected by
a glock, were not synched with the other nodes because they don't
use the inode glock synch operations (i.e. no "glops" were defined).
Therefore, journal recovery on a journal-recovering node were causing
the blocks to get out of sync with the node that was actually trying
to use that journal as it comes back up from a reboot.
There are two possible solutions: (1) To make the journals use the
normal inode glock sync operations, or (2) To make the journal
operations take effect immediately (i.e. no caching). Although
option 1 works, it turns out to be a lot more code. Steve opted
for option 2, which is much simpler and therefore less prone to
regression errors.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
--
This is for bugzilla bug #248176: GFS2: invalid metadata block
Patches 1 thru 3 were accepted upstream, but there were problems
with 4 and 5. Those issues have been resolved and now the recovery
tests are passing without errors. This code has gone through
41 * 3 successful gfs2 recovery tests before it hit an
unrelated (openais) problem.
This is a complete rewrite of patch 4 for bug #248176.
Part of the problem was that inodes were being recycled
before their buffers were flushed to the journal logs.
Another problem was that the clone bitmaps were being
searched for deleted inodes to recycle, but only the
"real" bitmaps should be searched for that purpose.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We only need a single gfs2_scand process rather than the one
per filesystem which we had previously. As a result the parameter
determining the frequency of gfs2_scand runs becomes a module
parameter rather than a mount parameter as it was before.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
these struct *_operations are all method tables, thus should be const.
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is patch 5 of 5 for bug #248176
Metadata corruption was occurring because page references weren't
being removed in all cases. I previously added a function called
detach_bufdata, but I discovered there already WAS a function out
there to do the job. It's called gfs2_meta_cache_flush. So I added
a call to that to remove the page references.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
this is more clear.
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is patch three of five for bug #248176.
The try_rgrp_unlink code in rgrp.c had an infinite loop. This was
caused because the bitmap function rgblk_search can return a block
less than the "goal" block, in which case it was looping. The fix is
to make it always march forward as needed.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is patch 2 of 5 for bug #248176.
The list_move code previously concocted in log.c for bug #238162
(see https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=238162#c23)
never runs as bh can now never be NULL at this point.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is the first of five patches for bug #248176:
There were still some critical variables being manipulated outside
the log_lock spinlock. That usually resulted in a hang.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This fixes an oops which was occurring during glock dumping due to the
seq file code not taking a reference to the glock. Also this fixes a
memory leak which occurred in certain cases, in turn preventing the
filesystem from unmounting.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When looking at an unrelated problem, I noticed that nfsd does not
set nameidata pointer on create (ie nd is NULL). This should
cause an oops in some cases in which when NFSd is mounted over GFS2.
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch cleans up duplicate includes in
fs/gfs2/
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
If a glock is in the exclusive state and a request for demote to
deferred has been received, then further requests for demote to
shared are being ignored. This patch fixes that by ensuring that
we demote to unlocked in that case.
Signed-off-by: Josef Whiter <jwhiter@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
One of the races relates to referencing a variable while not holding
its protecting spinlock. The patch simply moves the test inside the
spin lock. The other races occurs when a demote to unlocked request
occurs during the time a demote to shared request is already running.
This of course only happens in the case that the lock was in the
exclusive mode to start with. The patch adds a check to see if another
demote request has occurred in the mean time and if it has, then it
performs a second demote.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As bi_end_io is only called once when the reqeust is complete,
the 'size' argument is now redundant. Remove it.
Now there is no need for bio_endio to subtract the size completed
from bi_size. So don't do that either.
While we are at it, change bi_end_io to return void.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
The __mandatory_lock(inode) function makes the same check, but makes the code
more readable.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This reverts commit 569a7b6c2e. The
code was correct originally. The default setting for ACLs after a
remount should be to be the same as before the remount.
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Due to a mix up between the jdata attribute and inherit jdata attribute
it has not been possible to set the inherit jdata attribute on
directories. This is now fixed and the ioctl will report the inherit
jdata attribute for directories rather than the jdata attribute as it
did previously. This stems from our need to have the one bit in the
ioctl attr flags mean two different things according to whether the
underlying inode is a directory or not.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The error path in prepare_write() was incorrect in the (very rare) event
that the transaction fails to start. The following prevents a NULL
pointer dereference,
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The following patch fixes a bug where 0 was being used as a return code
to indicate "nothing to do" when in fact 0 was a valid block location
which might be returned by the function.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch seems to fix the problem described in bugzilla bug 246114.
It was written by Steve Whitehouse with some tweaking by me.
The code was looping in the relatively new section of code designed to
search for and reuse unlinked inodes. In cases where it was finding an
appropriate inode to reuse, it was looping around and finding the same
block over and over because a "<=" check should have been a "<" when
comparing the goal block to the last unlinked block found.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is part 2 of the patch for bug #245832, part 1 of which is already
in the git tree.
The problem was that sdp->sd_log_num_databuf was not always being
protected by the gfs2_log_lock spinlock, but the sd_log_le_databuf
(which it is supposed to reflect) was protected. That meant there
was a timing window during which gfs2_log_flush called
databuf_lo_before_commit and the count didn't match what was
really on the linked list in that window. So when it ran out of
items on the linked list, it decremented total_dbuf from 0 to -1 and
thus never left the "while(total_dbuf)" loop.
The solution is to protect the variable sdp->sd_log_num_databuf so
that the value will always match the contents of the linked list,
and therefore the number will never go negative, and therefore, the
loop will be exited properly.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Make it a little more clear that this is the default implementation for
the setleast operation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.
This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch completes Linus's wish that the fault return codes be made into
bit flags, which I agree makes everything nicer. This requires requires
all handle_mm_fault callers to be modified (possibly the modifications
should go further and do things like fault accounting in handle_mm_fault --
however that would be for another patch).
[akpm@linux-foundation.org: fix alpha build]
[akpm@linux-foundation.org: fix s390 build]
[akpm@linux-foundation.org: fix sparc build]
[akpm@linux-foundation.org: fix sparc64 build]
[akpm@linux-foundation.org: fix ia64 build]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Still apparently needs some ARM and PPC loving - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change ->fault prototype. We now return an int, which contains
VM_FAULT_xxx code in the low byte, and FAULT_RET_xxx code in the next byte.
FAULT_RET_ code tells the VM whether a page was found, whether it has been
locked, and potentially other things. This is not quite the way he wanted
it yet, but that's changed in the next patch (which requires changes to
arch code).
This means we no longer set VM_CAN_INVALIDATE in the vma in order to say
that a page is locked which requires filemap_nopage to go away (because we
can no longer remain backward compatible without that flag), but we were
going to do that anyway.
struct fault_data is renamed to struct vm_fault as Linus asked. address
is now a void __user * that we should firmly encourage drivers not to use
without really good reason.
The page is now returned via a page pointer in the vm_fault struct.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes
the virtual address -> file offset differently from linear mappings.
->populate is a layering violation because the filesystem/pagecache code
should need to know anything about the virtual memory mapping. The hitch here
is that the ->nopage handler didn't pass down enough information (ie. pgoff).
But it is more logical to pass pgoff rather than have the ->nopage function
calculate it itself anyway (because that's a similar layering violation).
Having the populate handler install the pte itself is likewise a nasty thing
to be doing.
This patch introduces a new fault handler that replaces ->nopage and
->populate and (later) ->nopfn. Most of the old mechanism is still in place
so there is a lot of duplication and nice cleanups that can be removed if
everyone switches over.
The rationale for doing this in the first place is that nonlinear mappings are
subject to the pagefault vs invalidate/truncate race too, and it seemed stupid
to duplicate the synchronisation logic rather than just consolidate the two.
After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in
pagecache. Seems like a fringe functionality anyway.
NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no
users have hit mainline yet.
[akpm@linux-foundation.org: cleanup]
[randy.dunlap@oracle.com: doc. fixes for readahead]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the race between invalidate_inode_pages and do_no_page.
Andrea Arcangeli identified a subtle race between invalidation of pages from
pagecache with userspace mappings, and do_no_page.
The issue is that invalidation has to shoot down all mappings to the page,
before it can be discarded from the pagecache. Between shooting down ptes to
a particular page, and actually dropping the struct page from the pagecache,
do_no_page from any process might fault on that page and establish a new
mapping to the page just before it gets discarded from the pagecache.
The most common case where such invalidation is used is in file truncation.
This case was catered for by doing a sort of open-coded seqlock between the
file's i_size, and its truncate_count.
Truncation will decrease i_size, then increment truncate_count before
unmapping userspace pages; do_no_page will read truncate_count, then find the
page if it is within i_size, and then check truncate_count under the page
table lock and back out and retry if it had subsequently been changed (ptl
will serialise against unmapping, and ensure a potentially updated
truncate_count is actually visible).
Complexity and documentation issues aside, the locking protocol fails in the
case where we would like to invalidate pagecache inside i_size. do_no_page
can come in anytime and filemap_nopage is not aware of the invalidation in
progress (as it is when it is outside i_size). The end result is that
dangling (->mapping == NULL) pages that appear to be from a particular file
may be mapped into userspace with nonsense data. Valid mappings to the same
place will see a different page.
Andrea implemented two working fixes, one using a real seqlock, another using
a page->flags bit. He also proposed using the page lock in do_no_page, but
that was initially considered too heavyweight. However, it is not a global or
per-file lock, and the page cacheline is modified in do_no_page to increment
_count and _mapcount anyway, so a further modification should not be a large
performance hit. Scalability is not an issue.
This patch implements this latter approach. ->nopage implementations return
with the page locked if it is possible for their underlying file to be
invalidated (in that case, they must set a special vm_flags bit to indicate
so). do_no_page only unlocks the page after setting up the mapping
completely. invalidation is excluded because it holds the page lock during
invalidation of each page (and ensures that the page is not mapped while
holding the lock).
This also allows significant simplifications in do_no_page, because we have
the page locked in the right place in the pagecache from the start.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since gfs2 can't prevent conflicting opens or leases on other nodes, we
probably shouldn't allow it to give out leases at all.
Put the newly defined lease operation into use in gfs2 by turning off
lease, unless we're using the "nolock' locking module (in which case all
locking is local anyway).
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Introduce is_owner_or_cap() macro in fs.h, and convert over relevant
users to it. This is done because we want to avoid bugs in the future
where we check for only effective fsuid of the current task against a
file's owning uid, without simultaneously checking for CAP_FOWNER as
well, thus violating its semantics.
[ XFS uses special macros and structures, and in general looked ...
untouchable, so we leave it alone -- but it has been looked over. ]
The (current->fsuid != inode->i_uid) check in generic_permission() and
exec_permission_lite() is left alone, because those operations are
covered by CAP_DAC_OVERRIDE and CAP_DAC_READ_SEARCH. Similarly operations
falling under the purview of CAP_CHOWN and CAP_LEASE are also left alone.
Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Cc: Al Viro <viro@ftp.linux.org.uk>
Acked-by: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
currently the export_operation structure and helpers related to it are in
fs.h. fs.h is already far too large and there are very few places needing the
export bits, so split them off into a separate header.
[akpm@linux-foundation.org: fix cifs build]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I forgot to remove capability.h from mm.h while removing sched.h! This
patch remedies that, because the only inline function which was using
CAP_something was made out of line.
Cross-compile tested without regressions on:
all powerpc defconfigs
all mips defconfigs
all m68k defconfigs
all arm defconfigs
all ia64 defconfigs
alpha alpha-allnoconfig alpha-defconfig alpha-up
arm
i386 i386-allnoconfig i386-defconfig i386-up
ia64 ia64-allnoconfig ia64-defconfig ia64-up
m68k
mips
parisc parisc-allnoconfig parisc-defconfig parisc-up
powerpc powerpc-up
s390 s390-allnoconfig s390-defconfig s390-up
sparc sparc-allnoconfig sparc-defconfig sparc-up
sparc64 sparc64-allnoconfig sparc64-defconfig sparc64-up
um-x86_64
x86_64 x86_64-allnoconfig x86_64-defconfig x86_64-up
as well as my two usual configs.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On Tue, 2007-07-10 at 10:06 +0100, Christoph Hellwig wrote:
> > -#define GFS2_LARGE_FH_SIZE 10
> > -
> > -struct gfs2_fh_obj {
> > - struct gfs2_inum_host this;
> > - u32 imode;
> > -};
> > +#define GFS2_LARGE_FH_SIZE 8
>
> Because gfs2_decode_fh only accepts file handles with GFS2_LARGE_FH_SIZE
> or GFS2_LARGE_FH_SIZE you don't accept filehandles sent out by and older
> gfs version anymore. Stale filehandles because of a new kernel version
> are a big no-no, so please add back code to handle the old filehandles
> on the decode side.
>
This should fix that problem I think since its only relating to end of
the fh we can just ignore that field in order to accept the older
format.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Wendy Cheng <wcheng@redhat.com>
They can use generic_file_splice_read() instead. Since sys_sendfile() now
prefers that, there should be no change in behaviour.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This reverts part of an earlier patch which tried to reclaim
gfs2_bufdata structures too early and resulted in a "use after free"
case (this bit from me). Also a change to not write out log headers
unless we really need to (in the case of flushing nothing we don't need
a header) from Bob.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
GFS2 has been passing i_mode within NFS File Handle. Other than the
wrong assumption that there is always room for this extra 16 bit value,
the current gfs2_get_dentry doesn't really need the i_mode to work
correctly. Note that GFS2 NFS code does go thru the same lookup code
path as direct file access route (where the mode is obtained from name
lookup) but gfs2_get_dentry() is coded for different purpose. It is not
used during lookup time. It is part of the file access procedure call.
When the call is invoked, if on-disk inode is not in-memory, it has to
be read-in. This makes i_mode passing a useless overhead.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
GFS2 lookup code doesn't ask for inode shared glock. This implies during
in-memory inode creation for existing file, GFS2 will not disk-read in
the inode contents. This leaves no_formal_ino un-initialized during
lookup time. The un-initialized no_formal_ino is subsequently encoded
into file handle. Clients will get ESTALE error whenever it tries to
access these files.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The kernel threads in gfs2, namely gfs2_scand, gfs2_logd, gfs2_quotad,
gfs2_glockd, gfs2_recoverd weren't doing anything when the suspend
mechanism was trying to freeze them.
I put in calls to refrigerator() in the loops for all the daemons and
suspend works as expected.
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch is for bugzilla bug #245663. This crosswrites a fix from
gfs1 (bz #210369) so that the mount options are reset properly upon
remount. This was tested on system trin-10.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This should have been part of the NFS patch #1 but somehow I missed it
when packaging the patches. It is not a critical issue as the others (I
hope). RHEL 5.1 31.el5 kernel runs fine without this change.
Our truncate code is chopped into two parts, one for vfs inode changes
(in vmtruncate()) and one of gfs inode (in gfs2_truncatei()). These two
operatons are, unfortunately, not atomic. So it could happens that
vmtruncate() succeeds (inode->i_size is changed) but gfs2_truncatei
fails (say kernel temporarily out of memory). This would leave gfs inode
i_di.di_size out of sync with vfs inode i_size. It will later confuse
gfs2_commit_write() if a write is issued. Last time I checked, it will
cause file corruption.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Code segment inside gfs2_block_truncate_page() doesn't set the return
code correctly. This causes NFSD erroneously returns EIO back to client
with setattr procedure call (truncate error).
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>