The position calculation in iomap_bmap() shifts bno the wrong way,
so we don't progress properly and end up re-mapping block zero
over and over, yielding an unchanging physical block range as the
logical block advances:
# filefrag -Be file
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 0: 21.. 21: 1: merged
1: 1.. 1: 21.. 21: 1: 22: merged
Discontinuity: Block 1 is at 21 (was 22)
2: 2.. 2: 21.. 21: 1: 22: merged
Discontinuity: Block 2 is at 21 (was 22)
3: 3.. 3: 21.. 21: 1: 22: merged
This breaks the FIBMAP interface for anyone using it (XFS), which
in turn breaks LILO, zipl, etc.
Bug-actually-spotted-by: Darrick J. Wong <darrick.wong@oracle.com>
Fixes: 89eb1906a9 ("iomap: add an iomap-based bmap implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
use actual protocol family passed by user rather than hardcoded
AF_INTE6 to cerate sockets.
current code is not working for IPv4.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix potential clobbering of user vector register state by AES ghash code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbYtldAAoJELescNyEwWM0aisH/ReBqfJb1kTr5ybUriSTsuTl
Vjn8O17aH+177P3xlY47+cYWsvewJxiy7MldlLEiER0tsyjYvqTDuzy7+ffdJJ8R
rs0MGhYh9WpD3OVjng7TmwXD71xefk/gLq4MPqmgn9e/DoAt4HO/7jC4c+mSwxRZ
gHsAH5g6WUclRvU1zXaT8QKdZnmwudPFvy5O+bQYQrIJr++zBiyJ47qu1+TjJQuC
kVmM7XV0c0L1fK9z7A18PcW+tMlIu15ITzJwEercXen/7XypdDOufgc4Y9odHCkC
5ZWnV5wZtaJIuo/JWWPnoheWfTqIVF7ggXwsaXmZ0hKfQkBvbJ8fxhogCIWgt40=
=rpVW
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 regression fix from Will Deacon:
"Ard found a nasty arm64 regression in 4.18 where the AES ghash/gcm
code doesn't notify the kernel about its use of the vector registers,
therefore potentially corrupting live user state.
The fix is straightforward and Herbert agreed for it to go via arm64"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
crypto/arm64: aes-ce-gcm - add missing kernel_neon_begin/end pair
Pull networking fixes from David Miller:
"Fixes keep trickling in:
1) Various IP fragmentation memory limit hardening changes from Eric
Dumazet.
2) Revert ipv6 metrics leak change, it causes more problems than it
fixes for now.
3) Fix WoL regression in stmmac driver, from Jose Abreu.
4) Netlink socket spectre v1 gadget fix, from Jeremy Cline"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
Revert "net/ipv6: fix metrics leak"
rxrpc: Fix user call ID check in rxrpc_service_prealloc_one
net: dsa: Do not suspend/resume closed slave_dev
netlink: Fix spectre v1 gadget in netlink_create()
Documentation: dpaa2: Use correct heading adornment
net: stmmac: Fix WoL for PCI-based setups
bonding: avoid lockdep confusion in bond_get_stats()
enic: do not call enic_change_mtu in enic_probe
ipv4: frags: handle possible skb truesize change
inet: frag: enforce memory limits earlier
net/mlx5e: IPoIB, Set the netdevice sw mtu in ipoib enhanced flow
net/mlx5e: Fix null pointer access when setting MTU of vport representor
net/mlx5e: Set port trust mode to PCP as default
net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager
net: dsa: mv88e6xxx: Fix SERDES support on 88E6141/6341
brcmfmac: fix regression in parsing NVRAM for multiple devices
iwlwifi: add more card IDs for 9000 series
Previously in squashfs_readpage() when copying data into the page
cache, it used the length of the datablock read from the filesystem
(after decompression). However, if the filesystem has been corrupted
this data block may be short, which will leave pages unfilled.
The fix for this is to compute the expected number of bytes to copy
from the inode size, and use this to detect if the block is short.
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Tested-by: Willy Tarreau <w@1wt.eu>
Cc: Анатолий Тросиненко <anatoly.trosinenko@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The squashfs fragment reading code doesn't actually verify that the
fragment is inside the fragment table. The end result _is_ verified to
be inside the image when actually reading the fragment data, but before
that is done, we may end up taking a page fault because the fragment
table itself might not even exist.
Another report from Anatoly and his endless squashfs image fuzzing.
Reported-by: Анатолий Тросиненко <anatoly.trosinenko@gmail.com>
Acked-by:: Phillip Lougher <phillip.lougher@gmail.com>,
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There were two report of boot failure cased by trampoline placed into
a reserved memory region. It can happen on machines that don't report
EBDA correctly.
Fix the problem by re-validating the found address against the E820 table.
If the address is in a reserved area, find the next usable region below the
initial address.
Fixes: 3548e131ec ("x86/boot/compressed/64: Find a place for 32-bit trampoline")
Reported-by: Dmitry Malkin <d.malkin@real-time-systems.com>
Reported-by: youling 257 <youling257@gmail.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180801133225.38121-1-kirill.shutemov@linux.intel.com
This reverts commit df18b50448.
This change causes other problems and use-after-free situations as
found by syzbot.
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch to fix the case where a lock request was interrupted ended up
changing default handling of errors such as NFS4ERR_DENIED and caused the
client to immediately resend the lock request. Let's do a partial revert
of that request so that the default is now to exit, but change the way
we handle resends to take into account the fact that the user may have
interrupted the request.
Reported-by: Kenneth Johansson <ken@kenjo.org>
Fixes: a3cf9bca2a ("NFSv4: Don't add a new lock on an interrupted wait..")
Cc: Benjamin Coddington <bcodding@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Pull ARM fix from Russell King:
"Just a single fix this time around for recent binutils causing build
problems when generating Thumb-2 code"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8781/1: Fix Thumb-2 syscall return for binutils 2.29+
Commit 2c4541e24c ("mm: use vma_init() to initialize VMAs on stack and
data segments") tried to initialize various left-over ad-hoc vma's
"properly", but actually made things worse for the temporary vma's used
for TLB flushing.
vma_init() doesn't actually initialize all of the vma, just a few
fields, so doing something like
- struct vm_area_struct vma = { .vm_mm = tlb->mm, };
+ struct vm_area_struct vma;
+
+ vma_init(&vma, tlb->mm);
was actually very bad: instead of having a nicely initialized vma with
every field but "vm_mm" zeroed, you'd have an entirely uninitialized vma
with only a couple of fields initialized. And they weren't even fields
that the code in question mostly cared about.
The flush_tlb_range() function takes a "struct vma" rather than a
"struct mm_struct", because a few architectures actually care about what
kind of range it is - being able to only do an ITLB flush if it's a
range that doesn't have data accesses enabled, for example. And all the
normal users already have the vma for doing the range invalidation.
But a few people want to call flush_tlb_range() with a range they just
made up, so they also end up using a made-up vma. x86 just has a
special "flush_tlb_mm_range()" function for this, but other
architectures (arm and ia64) do the "use fake vma" thing instead, and
thus got caught up in the vma_init() changes.
At the same time, the TLB flushing code really doesn't care about most
other fields in the vma, so vma_init() is just unnecessary and
pointless.
This fixes things by having an explicit "this is just an initializer for
the TLB flush" initializer macro, which is used by the arm/arm64/ia64
people who mis-use this interface with just a dummy vma.
Fixes: 2c4541e24c ("mm: use vma_init() to initialize VMAs on stack and data segments")
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Delete the old VM_BUG_ON_VMA() from zap_pmd_range(), which asserted
that mmap_sem must be held when splitting an "anonymous" vma there.
Whether that's still strictly true nowadays is not entirely clear,
but the danger of sometimes crashing on the BUG is now fairly clear.
Even with the new stricter rules for anonymous vma marking, the
condition it checks for can possible trigger. Commit 44960f2a7b
("staging: ashmem: Fix SIGBUS crash when traversing mmaped ashmem
pages") is good, and originally I thought it was safe from that
VM_BUG_ON_VMA(), because the /dev/ashmem fd exposed to the user is
disconnected from the vm_file in the vma, and madvise(,,MADV_REMOVE)
insists on VM_SHARED.
But after I read John's earlier mail, drawing attention to the
vfs_fallocate() in there: I may be wrong, and I don't know if Android
has THP in the config anyway, but it looks to me like an
unmap_mapping_range() from ashmem's vfs_fallocate() could hit precisely
the VM_BUG_ON_VMA(), once it's vma_is_anonymous().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There just check the user call ID isn't already in use, hence should
compare user_call_ID with xcall->user_call_ID, which is current
node's user_call_ID.
Fixes: 540b1c48c3 ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Use ACPI FADT preferred PM Profile to distinguish Skylake
desktop processors from some server ones with the same model
number in order to limit the scope of the recent IO-wait boost
optimization to servers, as intended (Srinivas Pandruvada).
- Fix several issues in the turbostat utility:
* Fix the -S option on 1-CPU systems (Len Brown).
* Fix computations using incorrect processor core counts (Artem
Bityutskiy).
* Fix the x2apic debug message (Len Brown).
* Fix logical node enumeration to allow for non-sequential
physical nodes (Prarit Bhargava).
* Fix reported family on modern AMD processors (Calvin Walton).
* Clarify the RAPL column information in the man page (Len Brown).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=oMfR
-----END PGP SIGNATURE-----
Merge tag 'pm-urgent-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the scope of a recent intel_pstate driver optimization used
incorrectly on some systems due to processor identification ambiguity
and fix a few issues in the turbostat utility, including three recent
regressions.
Specifics:
- Use ACPI FADT preferred PM Profile to distinguish Skylake desktop
processors from some server ones with the same model number in
order to limit the scope of the recent IO-wait boost optimization
to servers, as intended (Srinivas Pandruvada).
- Fix several issues in the turbostat utility:
* Fix the -S option on 1-CPU systems (Len Brown).
* Fix computations using incorrect processor core counts (Artem
Bityutskiy).
* Fix the x2apic debug message (Len Brown).
* Fix logical node enumeration to allow for non-sequential
physical nodes (Prarit Bhargava).
* Fix reported family on modern AMD processors (Calvin Walton).
* Clarify the RAPL column information in the man page (Len Brown)"
* tag 'pm-urgent-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Limit the scope of HWP dynamic boost platforms
tools/power turbostat: version 18.07.27
tools/power turbostat: Read extended processor family from CPUID
tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes
tools/power turbostat: fix x2apic debug message output file
tools/power turbostat: fix bogus summary values
tools/power turbostat: fix -S on UP systems
tools/power turbostat: Update turbostat(8) RAPL throttling column description
Anatoly continues to find issues with fuzzed squashfs images.
This time, corrupt, missing, or undersized data for the page filling
wasn't checked for, because the squashfs_{copy,read}_cache() functions
did the squashfs_copy_data() call without checking the resulting data
size.
Which could result in the page cache pages being incompletely filled in,
and no error indication to the user space reading garbage data.
So make a helper function for the "fill in pages" case, because the
exact same incomplete sequence existed in two places.
[ I should have made a squashfs branch for these things, but I didn't
intend to start doing them in the first place.
My historical connection through cramfs is why I got into looking at
these issues at all, and every time I (continue to) think it's a
one-off.
Because _this_ time is always the last time. Right? - Linus ]
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Amit Pundir and Youling in parallel reported crashes with recent
mainline kernels running Android:
F DEBUG : *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
F DEBUG : Build fingerprint: 'Android/db410c32_only/db410c32_only:Q/OC-MR1/102:userdebug/test-key
F DEBUG : Revision: '0'
F DEBUG : ABI: 'arm'
F DEBUG : pid: 2261, tid: 2261, name: zygote >>> zygote <<<
F DEBUG : signal 7 (SIGBUS), code 2 (BUS_ADRERR), fault addr 0xec00008
... <snip> ...
F DEBUG : backtrace:
F DEBUG : #00 pc 00001c04 /system/lib/libc.so (memset+48)
F DEBUG : #01 pc 0010c513 /system/lib/libart.so (create_mspace_with_base+82)
F DEBUG : #02 pc 0015c601 /system/lib/libart.so (art::gc::space::DlMallocSpace::CreateMspace(void*, unsigned int, unsigned int)+40)
F DEBUG : #03 pc 0015c3ed /system/lib/libart.so (art::gc::space::DlMallocSpace::CreateFromMemMap(art::MemMap*, std::__1::basic_string<char, std::__ 1::char_traits<char>, std::__1::allocator<char>> const&, unsigned int, unsigned int, unsigned int, unsigned int, bool)+36)
...
This was bisected back to commit bfd40eaff5 ("mm: fix
vma_is_anonymous() false-positives").
create_mspace_with_base() in the trace above, utilizes ashmem, and with
ashmem, for shared mappings we use shmem_zero_setup(), which sets the
vma->vm_ops to &shmem_vm_ops. But for private ashmem mappings nothing
sets the vma->vm_ops.
Looking at the problematic patch, it seems to add a requirement that one
call vma_set_anonymous() on a vma, otherwise the dummy_vm_ops will be
used. Using the dummy_vm_ops seem to triggger SIGBUS when traversing
unmapped pages.
Thus, this patch adds a call to vma_set_anonymous() for ashmem private
mappings and seems to avoid the reported problem.
Fixes: bfd40eaff5 ("mm: fix vma_is_anonymous() false-positives")
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Colin Cross <ccross@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Reported-by: Youling 257 <youling257@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit bfd40eaff5 ("mm: fix vma_is_anonymous() false-positives") made
newly allocated vma's have a dummy vm_ops field so that they wouldn't be
mistaken for anonymous mappings, and if you wanted an anonymous vma you
had to explicitly say so by calling "vma_set_anonymous()" on it.
However, it missed the two special vmas that ia64 processes have: the
register backing store and the NaT page. So they wouldn't actually act
like anonymous ranges, and page faults on them caused a SIGBUS rather
than the creation of a new anon page in them.
That obviously will make any ia64 binary very unhappy indeed, and the
boot fails early.
Fixes: bfd40eaff5 ("mm: fix vma_is_anonymous() false-positives")
Reported-by: Tony Luck <tony.luck@intel.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a DSA slave network device was previously disabled, there is no need
to suspend or resume it.
Fixes: 2446254915 ("net: dsa: allow switch drivers to implement suspend/resume hooks")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
'protocol' is a user-controlled value, so sanitize it after the bounds
check to avoid using it for speculative out-of-bounds access to arrays
indexed by it.
This addresses the following accesses detected with the help of smatch:
* net/netlink/af_netlink.c:654 __netlink_create() warn: potential
spectre issue 'nlk_cb_mutex_keys' [w]
* net/netlink/af_netlink.c:654 __netlink_create() warn: potential
spectre issue 'nlk_cb_mutex_key_strings' [w]
* net/netlink/af_netlink.c:685 netlink_create() warn: potential spectre
issue 'nl_table' [w] (local cap)
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add overline heading adornment to document title in order to comply
with kernel doc requirements.
Fixes: 60b9131 staging: fsl-mc: Convert documentation to rst format
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WoL won't work in PCI-based setups because we are not saving the PCI EP
state before entering suspend state and not allowing D3 wake.
Fix this by using a wrapper around stmmac_{suspend/resume} which
correctly sets the PCI EP state.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the optimizations for TLB invalidation from commit 0cef77c779
("powerpc/64s/radix: flush remote CPUs out of single-threaded
mm_cpumask"), the scope of a TLBI (global vs. local) can now be
influenced by the value of the 'copros' counter of the memory context.
When calling mm_context_remove_copro(), the 'copros' counter is
decremented first before flushing. It may have the unintended side
effect of sending local TLBIs when we explicitly need global
invalidations in this case. Thus breaking any nMMU user in a bad and
unpredictable way.
Fix it by flushing first, before updating the 'copros' counter, so
that invalidations will be global.
Fixes: 0cef77c779 ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On some systems using edge triggered ACPI Event Interrupts, the initial
state at boot is not setup by the firmware, instead relying on the edge
irq event handler running at least once to setup the initial state.
2 known examples of this are:
1) The Surface 3 has its _LID state controlled by an ACPI operation region
triggered by a GPIO event:
OperationRegion (GPOR, GeneralPurposeIo, Zero, One)
Field (GPOR, ByteAcc, NoLock, Preserve)
{
Connection (
GpioIo (Shared, PullNone, 0x0000, 0x0000, IoRestrictionNone,
"\\_SB.GPO0", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x004C
}
),
HELD, 1
}
Method (_E4C, 0, Serialized) // _Exx: Edge-Triggered GPE
{
If ((HELD == One))
{
^^LID.LIDB = One
}
Else
{
^^LID.LIDB = Zero
Notify (LID, 0x80) // Status Change
}
Notify (^^PCI0.SPI1.NTRG, One) // Device Check
}
Currently, the state of LIDB is wrong until the user actually closes or
open the cover. We need to trigger the GPIO event once to update the
internal ACPI state.
Coincidentally, this also enables the Surface 2 integrated HID sensor hub
which also requires an ACPI gpio operation region to start initialization.
2) Various Bay Trail based tablets come with an external USB mux and
TI T1210B USB phy to enable USB gadget mode. The mux is controlled by a
GPIO which is controlled by an edge triggered ACPI Event Interrupt which
monitors the micro-USB ID pin.
When the tablet is connected to a PC (or no cable is plugged in), the ID
pin is high and the tablet should be in gadget mode. But the GPIO
controlling the mux is initialized by the firmware so that the USB data
lines are muxed to the host controller.
This means that if the user wants to use gadget mode, the user needs to
first plug in a host-cable to force the ID pin low and then unplug it
and connect the tablet to a PC, to get the ACPI event handler to run and
switch the mux to device mode,
This commit fixes both by running the event-handler once on boot.
Note that the running of the event-handler is done from a late_initcall,
this is done because the handler AML code may rely on OperationRegions
registered by other builtin drivers. This avoids errors like these:
[ 0.133026] ACPI Error: No handler for Region [XSCG] ((____ptrval____)) [GenericSerialBus] (20180531/evregion-132)
[ 0.133036] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20180531/exfldio-265)
[ 0.133046] ACPI Error: Method parse/execution failed \_SB.GPO2._E12, AE_NOT_EXIST (20180531/psparse-516)
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
[hdegoede: Document BYT USB mux reliance on initial trigger]
[hdegoede: Run event handler from a late_initcall, rather then immediately]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Merge turbostat utility fixes for final 4.18:
- Fix the -S option on 1-CPU systems.
- Fix computations using incorrect processor core counts.
- Fix the x2apic debug message.
- Fix logical node enumeration to allow for non-sequential physical nodes.
- Fix reported family on modern AMD processors.
- Clarify the RAPL column information in the man page.
* pm-tools:
tools/power turbostat: version 18.07.27
tools/power turbostat: Read extended processor family from CPUID
tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes
tools/power turbostat: fix x2apic debug message output file
tools/power turbostat: fix bogus summary values
tools/power turbostat: fix -S on UP systems
tools/power turbostat: Update turbostat(8) RAPL throttling column description
In commit ab123fe071 ("enic: handle mtu change for vf properly")
ASSERT_RTNL() is added to _enic_change_mtu() to prevent it from being
called without rtnl held. enic_probe() calls enic_change_mtu()
without rtnl held. At this point netdev is not registered yet.
Remove call to enic_change_mtu and assign the mtu to netdev->mtu.
Fixes: ab123fe071 ("enic: handle mtu change for vf properly")
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip_frag_queue() might call pskb_pull() on one skb that
is already in the fragment queue.
We need to take care of possible truesize change, or we
might have an imbalance of the netns frags memory usage.
IPv6 is immune to this bug, because RFC5722, Section 4,
amended by Errata ID 3089 states :
When reassembling an IPv6 datagram, if
one or more its constituent fragments is determined to be an
overlapping fragment, the entire datagram (and any constituent
fragments) MUST be silently discarded.
Fixes: 158f323b98 ("net: adjust skb->truesize in pskb_expand_head()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently check current frags memory usage only when
a new frag queue is created. This allows attackers to first
consume the memory budget (default : 4 MB) creating thousands
of frag queues, then sending tiny skbs to exceed high_thresh
limit by 2 to 3 order of magnitude.
Note that before commit 648700f76b ("inet: frags: use rhashtables
for reassembly units"), work queue could be starved under DOS,
getting no cpu cycles.
After commit 648700f76b, only the per frag queue timer can eventually
remove an incomplete frag queue and its skbs.
Fixes: b13d3cbfb8 ("inet: frag: move eviction of queues to work queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Peter Oskolkov <posk@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbYMQXAAoJEEg/ir3gV/o+BNcH/R6X7oxLoskYIO9nWejdMKUj
GzojL3mne33mKGEwGyFfLmRWQMbgPUvYrk5mXu/1uFPAHzRA+BwioZeyeWxfCYFe
blJuv59A1EBudSvQKUDEMeXaQYD7/6T92fbu3ZvGiZEZI+OTj3z6PtBU0Tr6NEMZ
zxRKWkpLPdjUwJh51tXEgfmEqy+gnn9tNIZt8ClRJ0w5wbgnignhzx1lCry1SE95
6zNS8aZKRxSIaVY41MxLSTRb9jLBmeZtiD67ntJAZIaLaMIMUqZbhW5Rtt7rz8HZ
chAiY8KdmEM35Ix6+ovzT9FKz/Jhp6/0nDioNYPRT5D3rHcqe+wUb8/8zROnhgs=
=b9YA
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2018-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2018-07-31
The following series includes four mlx5 fixes.
Please pull and let me know if there's any problem.
For -stable v4.14
net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager
For -stable v4.16
net/mlx5e: Set port trust mode to PCP as default
For -stable v4.17
net/mlx5e: IPoIB, Set the netdevice sw mtu in ipoib enhanced flow
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=MN3z
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20180731' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"A single small audit fix to guard against memory allocation failures
when logging information about a kernel module load.
It's small, easy to understand, and self-contained; while nothing is
zero risk, this should be pretty low"
* tag 'audit-pr-20180731' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix potential null dereference 'context->module.name'
local_timer_softirq_pending() checks whether the timer softirq is
pending with: local_softirq_pending() & TIMER_SOFTIRQ.
This is wrong because TIMER_SOFTIRQ is the softirq number and not a
bitmask. So the test checks for the wrong bit.
Use BIT(TIMER_SOFTIRQ) instead.
Fixes: 5d62c183f9 ("nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick()")
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Cc: bigeasy@linutronix.de
Cc: peterz@infradead.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180731161358.29472-1-anna-maria@linutronix.de
After introduction of the cited commit, mlx5e_build_nic_params
receives the netdevice mtu in order to set the sw_mtu of mlx5e_params.
For enhanced IPoIB, the netdevice mtu is not set in this stage,
therefore, the initial sw_mtu equals zero. As a result, the hw_mtu
of the receive queue will be calculated incorrectly causing traffic
issues.
To fix this issue, query for port mtu before building the nic params.
Fixes: 472a1e44b3 ("net/mlx5e: Save MTU in channels params")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
MTU helper function is used by both conventional mlx5e
instances (PF/VF) and the eswitch representors. The representor
shouldn't change the nic vport context MTU, the VF is responsible for
that. Therefore set_mtu_cb has a null value when changing the
representor MTU.
Fixes: 250a42b6a7 ("net/mlx5e: Support configurable MTU for vport representors")
Signed-off-by: Adi Nissim <adin@mellanox.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The hairpin offload code has dependency on the trust mode being PCP.
Hence we should set PCP as the default for handling cases where we are
disallowed to read the trust mode from the FW, or failed to initialize it.
Fixes: 106be53b6b ('net/mlx5e: Set per priority hairpin pairs')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Execute mlx5_eswitch_init() only if we have MLX5_ESWITCH_MANAGER
capabilities.
Do the same for mlx5_eswitch_cleanup().
Fixes: a9f7705ffd ("net/mlx5: Unify vport manager capability check")
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Version 1 of the patch adding SERDES support to the 88E6141/6341
correctly added the ops to the 88E6141/6341. However, by the time
version 3 was committed, the ops had moved to the 88E6085/6175. Put
them back where they belong.
Fixes: 5bafeb6e7e ("net: dsa: mv88e6xxx: 88E6141/6341 SERDES support")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Last set of fixes before 4.18 is released
iwlwifi
* add new IDs for cards already available on the market
brcmfmac
* fix a regression introduced in v4.17
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbYDWEAAoJEG4XJFUm622bPGUH+QHGcuazgPqR4TsQXwmfNdJB
HJdsx90WW6TLMDzF9EquA4ontBggq2Mdnorxt1SIXK+ZeajFWZlKyl5ol24TtOH3
9uFhQRID2KlWPnwgrBTsFAiNNJar+X4GoUX1SqFz8VJnkYgfdtBHaVK59HdWSp5e
2rVaG/ORUMNnY58f6jr9wOhn/miC1CKuJk5j83CN2KlETkqj/VoGUE2dShdJl0wu
+4iYznIwhG9f6KykReaBmJbh4xu6AEqkFbadKGwWcChR3DDmzDAsWzkcWEocx8ZY
EpoF6vW8GoBB2RE2Syg/Y6exQGnDb4itYQYxvJV1qV52XwYfvDzCdlbLn+kv34I=
=4wJj
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-for-davem-2018-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.18
Last set of fixes before 4.18 is released
iwlwifi
* add new IDs for cards already available on the market
brcmfmac
* fix a regression introduced in v4.17
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nine fixes, five in the qla2xxx driver, the most serious of which is
the uninitialized list head crash which can be observed in most
systems under a sufficiently loaded low memory environment. The two
sg fixes are minor but obvious and two target ones which seem
reasonable but not high impact.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW2B83yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfjaAQDN5p+O
kB54JeM3Ae0IT7StDsK+LECoeGj2fYACBH+wUQD/eOZEXi6pDJ796VJWwjfqnxWb
6Eonm3Qtikxj/Q4Z78w=
=k2Af
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Nine fixes, five in the qla2xxx driver, the most serious of which is
the uninitialized list head crash which can be observed in most
systems under a sufficiently loaded low memory environment.
The two sg fixes are minor but obvious and two target ones which seem
reasonable but not high impact"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Return error when TMF returns
scsi: qla2xxx: Fix ISP recovery on unload
scsi: qla2xxx: Fix driver unload by shutting down chip
scsi: qla2xxx: Fix NPIV deletion by calling wait_for_sess_deletion
scsi: qla2xxx: Fix unintialized List head crash
scsi: sg: update comment for blk_get_request()
scsi: sg: fix minor memory leak in error path
scsi: libiscsi: fix possible NULL pointer dereference in case of TMF
scsi: target: iscsi: cxgbit: fix max iso npdu calculation
Some bugfixes that seem important and safe enough to merge at the last
minute.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbXxanAAoJECgfDbjSjVRpDqoH/iqUcK2KkLQTUut4KWF0xjfs
0AZxB9sT2fXNAwF4dDS0SywN8oXKRA0c83AY5WgtcJfndPYEhg4mZsiQThLN6GVw
/CRVizpN1mSbn7ds4Xl5htD2Ml8OxRkAdulOXfG/DZ2eIiEgoQ6vPzDF2jqy1dIj
yWjBNWoSKIqElkN310BlkDX0hjqSP9zr4kEDFSB7AHcsNRhUDcgRqFzA83bRZU0b
qKNzeLwU28jYnjzBPjQ449lkHGXtSjSkBnxUOXHU2CVCiQ5I0rBPi/Xdhtd94gDM
Bbl4Spf74IiwPdfMwk4pa6rO8JPLpYhrFHIG0Gkk8AFV4Gwh1IYQ9s3On3ADWSQ=
=p1AG
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Some bugfixes that seem important and safe enough to merge at the last
minute"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_balloon: fix another race between migration and ballooning
tools/virtio: add kmalloc_array stub
tools/virtio: add dma barrier stubs
- Fix a recent ACPICA regression introduced by a previous fix
that caused control method execution at the table level to be
mishandled by mistake (Erik Schmauss).
- Fix a hibernation regression from the 4.15 cycle in the ACPI
driver for Intel SoCs (LPSS) that caused the platform firmware
to be confused during resume from hibernation by the driver's
PM quirks which was fixed for system-wide suspend/resume (ACPI
S3) earlier in this cycle, but that previous fix missed the
hibernation (ACPI S4) case (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=N9R3
-----END PGP SIGNATURE-----
Merge tag 'acpi-urgent-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a recent ACPICA regression affecting control method
execution at the table level and an earlier hibernation regression in
the ACPI driver for Intel SoCs (LPSS) that was missed by a previous
fix in this cycle.
Specifics:
- Fix a recent ACPICA regression introduced by a previous fix that
caused control method execution at the table level to be mishandled
by mistake (Erik Schmauss).
- Fix a hibernation regression from the 4.15 cycle in the ACPI driver
for Intel SoCs (LPSS) that caused the platform firmware to be
confused during resume from hibernation by the driver's PM quirks
which was fixed for system-wide suspend/resume (ACPI S3) earlier in
this cycle, but that previous fix missed the hibernation (ACPI S4)
case (Rafael Wysocki)"
* tag 'acpi-urgent-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: AML Parser: ignore control method status in module-level code
ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation
When a PCI device is detected, pdev->is_added is set to 1 and proc and
sysfs entries are created.
When the device is removed, pdev->is_added is checked for one and then
device is detached with clearing of proc and sys entries and at end,
pdev->is_added is set to 0.
is_added and is_busmaster are bit fields in pci_dev structure sharing same
memory location.
A strange issue was observed with multiple removal and rescan of a PCIe
NVMe device using sysfs commands where is_added flag was observed as zero
instead of one while removing device and proc,sys entries are not cleared.
This causes issue in later device addition with warning message
"proc_dir_entry" already registered.
Debugging revealed a race condition between the PCI core setting the
is_added bit in pci_bus_add_device() and the NVMe driver reset work-queue
setting the is_busmaster bit in pci_set_master(). As these fields are not
handled atomically, that clears the is_added bit.
Move the is_added bit to a separate private flag variable and use atomic
functions to set and retrieve the device addition state. This avoids the
race because is_added no longer shares a memory location with is_busmaster.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200283
Signed-off-by: Hari Vyas <hari.vyas@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Calling pmull_gcm_encrypt_block() requires kernel_neon_begin() and
kernel_neon_end() to be used since the routine touches the NEON
register file. Add the missing calls.
Also, since NEON register contents are not preserved outside of
a kernel mode NEON region, pass the key schedule array again.
Fixes: 7c50136a8a ("crypto: arm64/aes-ghash - yield NEON after every ...")
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Dynamic boosting of HWP performance on IO wake showed significant
improvement to IO workloads. This series was intended for Skylake Xeon
platforms only and feature was enabled by default based on CPU model
number.
But some Xeon platforms reused the Skylake desktop CPU model number. This
caused some undesirable side effects to some graphics workloads. Since
they are heavily IO bound, the increase in CPU performance decreased the
power available for GPU to do its computing and hence decrease in graphics
benchmark performance.
For example on a Skylake desktop, GpuTest benchmark showed average FPS
reduction from 529 to 506.
This change makes sure that HWP boost feature is only enabled for Skylake
server platforms by using ACPI FADT preferred PM Profile. If some desktop
users wants to get benefit of boost, they can still enable boost from
intel_pstate sysfs attribute "hwp_dynamic_boost".
Fixes: 41ab43c9c8 (cpufreq: intel_pstate: enable boost for Skylake Xeon)
Link: https://bugs.freedesktop.org/show_bug.cgi?id=107410
Reported-by: Eero Tamminen <eero.t.tamminen@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge a fix for hibernation regression in the ACPI driver for Intel
SoCs (LPSS).
* acpi-soc:
ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation
- Update the tools copy of several files, including perf_event.h,
powerpc's asm/unistd.h (new io_pgetevents syscall), bpf.h and
x86's memcpy_64.s (used in 'perf bench mem'), silencing the
respective warnings during the perf tools build.
- Fix the build on the alpine:edge distro.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=r5Gg
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-4.18-20180730' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Update the tools copy of several files, including perf_event.h,
powerpc's asm/unistd.h (new io_pgetevents syscall), bpf.h and
x86's memcpy_64.s (used in 'perf bench mem'), silencing the
respective warnings during the perf tools build.
- Fix the build on the alpine:edge distro.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Masayoshi Mizuma reported that a warning message is shown while a CPU is
hot-removed on Broadwell servers:
WARNING: CPU: 126 PID: 6 at arch/x86/events/intel/uncore.c:988
uncore_pci_remove+0x10b/0x150
Call Trace:
pci_device_remove+0x42/0xd0
device_release_driver_internal+0x148/0x220
pci_stop_bus_device+0x76/0xa0
pci_stop_root_bus+0x44/0x60
acpi_pci_root_remove+0x1f/0x80
acpi_bus_trim+0x57/0x90
acpi_bus_trim+0x2e/0x90
acpi_device_hotplug+0x2bc/0x4b0
acpi_hotplug_work_fn+0x1a/0x30
process_one_work+0x174/0x3a0
worker_thread+0x4c/0x3d0
kthread+0xf8/0x130
This bug was introduced by:
commit 15a3e845b0 ("perf/x86/intel/uncore: Fix SBOX support for Broadwell CPUs")
The index of "QPI Port 2 filter" was hardcode to 2, but this conflicts with the
index of "PCU.3" which is "HSWEP_PCI_PCU_3", which equals to 2 as well.
To fix the conflict, the hardcoded index needs to be cleaned up:
- introduce a new enumerator "BDX_PCI_QPI_PORT2_FILTER" for "QPI Port 2
filter" on Broadwell,
- increase UNCORE_EXTRA_PCI_DEV_MAX by one,
- clean up the hardcoded index.
Debugged-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: msys.mizuma@gmail.com
Cc: stable@vger.kernel.org
Fixes: 15a3e845b0 ("perf/x86/intel/uncore: Fix SBOX support for Broadwell CPUs")
Link: http://lkml.kernel.org/r/1532953688-15008-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking fixes from David Miller:
"Several smallish fixes, I don't think any of this requires another -rc
but I'll leave that up to you:
1) Don't leak uninitialzed bytes to userspace in xfrm_user, from Eric
Dumazet.
2) Route leak in xfrm_lookup_route(), from Tommi Rantala.
3) Premature poll() returns in AF_XDP, from Björn Töpel.
4) devlink leak in netdevsim, from Jakub Kicinski.
5) Don't BUG_ON in fib_compute_spec_dst, the condition can
legitimately happen. From Lorenzo Bianconi.
6) Fix some spectre v1 gadgets in generic socket code, from Jeremy
Cline.
7) Don't allow user to bind to out of range multicast groups, from
Dmitry Safonov with a follow-up by Dmitry Safonov.
8) Fix metrics leak in fib6_drop_pcpu_from(), from Sabrina Dubroca"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
netlink: Don't shift with UB on nlk->ngroups
net/ipv6: fix metrics leak
xen-netfront: wait xenbus state change when load module manually
can: ems_usb: Fix memory leak on ems_usb_disconnect()
openvswitch: meter: Fix setting meter id for new entries
netlink: Do not subscribe to non-existent groups
NET: stmmac: align DMA stuff to largest cache line length
tcp_bbr: fix bw probing to raise in-flight data for very small BDPs
net: socket: Fix potential spectre v1 gadget in sock_is_registered
net: socket: fix potential spectre v1 gadget in socketcall
net: mdio-mux: bcm-iproc: fix wrong getter and setter pair
ipv4: remove BUG_ON() from fib_compute_spec_dst
enic: handle mtu change for vf properly
net: lan78xx: fix rx handling before first packet is send
nfp: flower: fix port metadata conversion bug
bpf: use GFP_ATOMIC instead of GFP_KERNEL in bpf_parse_prog()
bpf: fix bpf_skb_load_bytes_relative pkt length check
perf build: Build error in libbpf missing initialization
net: ena: Fix use of uninitialized DMA address bits field
bpf: btf: Use exact btf value_size match in map_check_btf()
...
