Commit Graph

7 Commits

Author SHA1 Message Date
Andrea Gelmini
17669fd60e ARM mach-mx3: duplicated include
arch/arm/mach-mx3/mx31lite-db.c: linux/platform_device.h is included more than once.

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-30 14:22:58 +02:00
Vladimir Zapolskiy
7d7a77e567 imx31: add watchdog device on litekit board.
This patch adds support for SoC build-in watchdog device on litekit
board.

Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-30 14:21:12 +02:00
Vladimir Zapolskiy
70c91a3849 ARM: IMX31: configure pins iomux for SDHC setup on litekit board.
This patch adds SDHC support, and corrects current pins setup.
Added irq handling on card removal.

Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26 18:56:54 +01:00
Daniel Mack
81057f3286 ARM: MX3: add support for GPIO LEDs on litekit db
The names are chosen to match the silkscreen.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-19 17:11:02 +01:00
Daniel Mack
84677d114a ARM: MX3: add SPI devices for mx31lite
Some header files were reordered while I was at it.
The only device currently registered is the ATLAS PMIC (MC13783) chip.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-19 17:11:01 +01:00
Daniel Mack
364cd540f0 ARM: MX3: add MMC/SDHC support to mx31lite-db.c
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-19 17:11:01 +01:00
Daniel Mack
b7d91a62cb ARM: MX3: modularize 'mx31lite' code
This commit splits the support code for LogicPD's mx31lite hardware
into module and board specific parts.

This introduces a new mandatory coreparam called 'mx31lite_baseboard'
which specifies the base board support to use. For now, only the LiteKit
development board is supported, and developers of own boards are
encouraged to use that as reference.

The UART support moved to the board code.
Some comments were amended along the way.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-19 17:11:01 +01:00