Current code uses wrong mask when setting RT5645_DMIC_2_DP_GPIO12 bit,
fix it.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the ACPI match ID for rt5645/5650 codec
Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Here's the big char/misc driver patchset for 4.1-rc1.
Lots of different driver subsystem updates here, nothing major, full
details are in the shortlog below.
All of this has been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlU2IMEACgkQMUfUDdst+yloDQCfbyIRL23WVAn9ckQse/y8gbjB
OT4AoKTJbwndDP9Kb/lrj2tjd9QjNVrC
=xhen
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here's the big char/misc driver patchset for 4.1-rc1.
Lots of different driver subsystem updates here, nothing major, full
details are in the shortlog.
All of this has been in linux-next for a while"
* tag 'char-misc-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (133 commits)
mei: trace: remove unused TRACE_SYSTEM_STRING
DTS: ARM: OMAP3-N900: Add lis3lv02d support
Documentation: DT: lis302: update wakeup binding
lis3lv02d: DT: add wakeup unit 2 and wakeup threshold
lis3lv02d: DT: use s32 to support negative values
Drivers: hv: hv_balloon: correctly handle num_pages>INT_MAX case
Drivers: hv: hv_balloon: correctly handle val.freeram<num_pages case
mei: replace check for connection instead of transitioning
mei: use mei_cl_is_connected consistently
mei: fix mei_poll operation
hv_vmbus: Add gradually increased delay for retries in vmbus_post_msg()
Drivers: hv: hv_balloon: survive ballooning request with num_pages=0
Drivers: hv: hv_balloon: eliminate jumps in piecewiese linear floor function
Drivers: hv: hv_balloon: do not online pages in offline blocks
hv: remove the per-channel workqueue
hv: don't schedule new works in vmbus_onoffer()/vmbus_onoffer_rescind()
hv: run non-blocking message handlers in the dispatch tasklet
coresight: moving to new "hwtracing" directory
coresight-tmc: Adding a status interface to sysfs
coresight: remove the unnecessary configuration coresight-default-sink
...
Now that the kernel provides DIV_ROUND_CLOSEST_ULL(), drop the internal
implementation and use the kernel one.
Signed-off-by: Javi Merino <javi.merino@arm.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Peter Rosin <peda@axentia.se>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There have been major modernization with the standard bus: in ALSA
sequencer core and HD-audio. Also, HD-audio receives the regmap
support replacing the in-house cache register cache code. These
changes shouldn't impact the existing behavior, but rather
refactoring.
In addition, HD-audio got the code split to a core library part and
the "legacy" driver parts. This is a preliminary work for adapting
the upcoming ASoC HD-audio driver, and the whole transition is still
work in progress, likely finished in 4.1.
Along with them, there are many updates in ASoC area as usual, too:
lots of cleanups, Intel code shuffling, etc.
Here are some highlights:
ALSA core:
- PCM: the audio timestamp / wallclock enhancement
- PCM: fixes in DPCM management
- Fixes / cleanups of user-space control element management
- Sequencer: modernization using the standard bus
HD-audio:
- Modernization using the standard bus
- Regmap support
- Use standard runtime PM for codec power saving
- Widget-path based power-saving for IDT, VIA and Realtek codecs
- Reorganized sysfs entries for each codec object
- More Dell headset support
ASoC:
- Move of jack registration to the card level
- Lots of ASoC cleanups, mainly moving things from the CODEC level
to the card level
- Support for DAPM routes specified by both the machine driver and DT
- Continuing improvements to rcar
- pcm512x enhacements
- Intel platforms updates
- rt5670 updates / fixes
- New platforms / devices: some non-DSP Qualcomm platforms, Google's
Storm platform, Maxmim MAX98925 CODECs and the Ingenic JZ4780 SoC
Misc:
- ice1724: Improved ESI W192M support
- emu10k1: Emu 1010 fixes/enhancement
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=4z5j
-----END PGP SIGNATURE-----
Merge tag 'sound-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There have been major modernization with the standard bus: in ALSA
sequencer core and HD-audio. Also, HD-audio receives the regmap
support replacing the in-house cache register cache code. These
changes shouldn't impact the existing behavior, but rather
refactoring.
In addition, HD-audio got the code split to a core library part and
the "legacy" driver parts. This is a preliminary work for adapting
the upcoming ASoC HD-audio driver, and the whole transition is still
work in progress, likely finished in 4.1.
Along with them, there are many updates in ASoC area as usual, too:
lots of cleanups, Intel code shuffling, etc.
Here are some highlights:
ALSA core:
- PCM: the audio timestamp / wallclock enhancement
- PCM: fixes in DPCM management
- Fixes / cleanups of user-space control element management
- Sequencer: modernization using the standard bus
HD-audio:
- Modernization using the standard bus
- Regmap support
- Use standard runtime PM for codec power saving
- Widget-path based power-saving for IDT, VIA and Realtek codecs
- Reorganized sysfs entries for each codec object
- More Dell headset support
ASoC:
- Move of jack registration to the card level
- Lots of ASoC cleanups, mainly moving things from the CODEC level to
the card level
- Support for DAPM routes specified by both the machine driver and DT
- Continuing improvements to rcar
- pcm512x enhacements
- Intel platforms updates
- rt5670 updates / fixes
- New platforms / devices: some non-DSP Qualcomm platforms, Google's
Storm platform, Maxmim MAX98925 CODECs and the Ingenic JZ4780 SoC
Misc:
- ice1724: Improved ESI W192M support
- emu10k1: Emu 1010 fixes/enhancement"
* tag 'sound-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (411 commits)
ALSA: hda - set GET bit when adding a vendor verb to the codec regmap
ALSA: hda/realtek - Enable the ALC292 dock fixup on the Thinkpad T450
ALSA: hda - Fix another race in runtime PM refcounting
ALSA: hda - Expose codec type sysfs
ALSA: ctl: fix to handle several elements added by one operation for userspace element
ASoC: Intel: fix array_size.cocci warnings
ASoC: n810: Automatically disconnect non-connected pins
ASoC: n810: Consistently pass the card DAPM context to n810_ext_control()
ASoC: davinci-evm: Use card DAPM context to access widgets
ASoC: mop500_ab8500: Use card DAPM context to access widgets
ASoC: wm1133-ev1: Use card DAPM context to access widgets
ASoC: atmel: Improve machine driver compile test coverage
ASoC: atmel: Add dependency to SND_SOC_I2C_AND_SPI where necessary
ALSA: control: Fix a typo of SNDRV_CTL_ELEM_ACCESS_TLV_* with SNDRV_CTL_TLV_OP_*
ALSA: usb-audio: Don't attempt to get Microsoft Lifecam Cinema sample rate
ASoC: rnsd: fix build regression without CONFIG_OF
ALSA: emu10k1: add toggles for E-mu 1010 optical ports
ALSA: ctl: fill identical information to return value when adding userspace elements
ALSA: ctl: fix a bug to return no identical information in info operation for userspace controls
ALSA: ctl: confirm to return all identical information in 'activate' event
...
A selection of changes for v4.1 so far. The main things are:
- Move of jack registration to the card where it belongs.
- Support for DAPM routes specified by both the machine driver and DT.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU960DAAoJECTWi3JdVIfQkKIH/RDvxRn8dvKOPF5U9Uix3chH
JWKkzqfsMP0EpmQTzCQPp0ShAyYcWSbYsopicynPxUem5vS4Z8+UmOgEEgkj59pK
USbF6v1jCQXA6BcbKyUcRRBD9FtRkfVDc7mYbRs2CcwQz2CGCgee41cvPM+2BT+z
QdNC9UJARSweGvE1IUJSfpfYOly+BJ2s0/28RaQ0PGt+I0auoYx7IMFgMSDjv2p6
PY0kyQiwm3Kyj2uNXPZ5gEuPxlw/t8n4fbQNrBYAvxzN+EF5NrGdKE3N7MI1xRV/
EkFhzy+uM3X9c37tb2lT2fgPFlBc9rgPuLPSyoQ6nxa5ghCqAlgRhzpxRem8hhU=
=VlCw
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.1' into asoc-next
ASoC: Changes for v4.1
A selection of changes for v4.1 so far. The main things are:
- Move of jack registration to the card where it belongs.
- Support for DAPM routes specified by both the machine driver and DT.
# gpg: Signature made Thu 05 Mar 2015 01:10:27 GMT using RSA key ID 5D5487D0
# gpg: WARNING: digest algorithm MD5 is deprecated
# gpg: please see https://gnupg.org/faq/weak-digest-algos.html for more information
# gpg: Oops: keyid_from_fingerprint: no pubkey
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg: aka "Mark Brown <broonie@debian.org>"
# gpg: aka "Mark Brown <broonie@kernel.org>"
# gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg: aka "Mark Brown <broonie@linaro.org>"
# gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
This patch backs out a change that came in during the merge window which
selects a configuration for GPIO4 on pcm512x CODECs that may not be
suitable for all systems using the device. Changes for v4.1 will make
this properly configurable but for now it's safest to revert to the
v3.19 behaviour and leave the pin configuration alone.
Sorry for sending this direct at the last minute but due to the GPIO
misuse it'd be really good to get it in the release and I'd not realised
it hadn't been sent yet - between some travel, a job change and other
non-urgent fixes coming in I'd lost track of the urgency. It's been in
-next for several weeks now, is isolated to the driver and fairly clear
to inspection.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVKY6pAAoJECTWi3JdVIfQkeAH/1d9FBe2VEqkDR8uJ8T7STsM
1PWg4pT2dLCRiqqhFgrZkKGqdyVCUWbXFz/ksGoK3bip8VMy8naBen1xKdyWgcQT
ZZuGQfywFGxOQSI0vdZSXdr1XyQO47AFRiJ2H9NQEOIMOzCRsjpAtihhkZL8rrCn
AwwViO6TFg09gijkQdbVsm6fxCBlDHM46/EhxP+Xo2K4TEOEeT+ZKxX6IpcJNmA5
Sw6TgyeQwu8LfHwNREczcojmk1wapytZvVivbNedNw7B6I1ujdPIsmnHWFWbiWv5
lfhcM77VLKmv3mwB/v1yRBEf3lNCgqn523N+S8Al9SjDkdLyibhuAWqZXUzsjqY=
=TbSp
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v4.0-rc7' into asoc-linus
ASoC: Last minute fix for v4.0
This patch backs out a change that came in during the merge window which
selects a configuration for GPIO4 on pcm512x CODECs that may not be
suitable for all systems using the device. Changes for v4.1 will make
this properly configurable but for now it's safest to revert to the
v3.19 behaviour and leave the pin configuration alone.
Sorry for sending this direct at the last minute but due to the GPIO
misuse it'd be really good to get it in the release and I'd not realised
it hadn't been sent yet - between some travel, a job change and other
non-urgent fixes coming in I'd lost track of the urgency. It's been in
-next for several weeks now, is isolated to the driver and fairly clear
to inspection.
# gpg: Signature made Sat 11 Apr 2015 22:14:17 BST using RSA key ID 5D5487D0
# gpg: WARNING: digest algorithm MD5 is deprecated
# gpg: please see https://gnupg.org/faq/weak-digest-algos.html for more information
# gpg: Oops: keyid_from_fingerprint: no pubkey
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg: aka "Mark Brown <broonie@debian.org>"
# gpg: aka "Mark Brown <broonie@kernel.org>"
# gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg: aka "Mark Brown <broonie@linaro.org>"
# gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
This patch backs out a change that came in during the merge window which
selects a configuration for GPIO4 on pcm512x CODECs that may not be
suitable for all systems using the device. Changes for v4.1 will make
this properly configurable but for now it's safest to revert to the
v3.19 behaviour and leave the pin configuration alone.
Sorry for sending this direct at the last minute but due to the GPIO
misuse it'd be really good to get it in the release and I'd not realised
it hadn't been sent yet - between some travel, a job change and other
non-urgent fixes coming in I'd lost track of the urgency. It's been in
-next for several weeks now, is isolated to the driver and fairly clear
to inspection.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVKY6pAAoJECTWi3JdVIfQkeAH/1d9FBe2VEqkDR8uJ8T7STsM
1PWg4pT2dLCRiqqhFgrZkKGqdyVCUWbXFz/ksGoK3bip8VMy8naBen1xKdyWgcQT
ZZuGQfywFGxOQSI0vdZSXdr1XyQO47AFRiJ2H9NQEOIMOzCRsjpAtihhkZL8rrCn
AwwViO6TFg09gijkQdbVsm6fxCBlDHM46/EhxP+Xo2K4TEOEeT+ZKxX6IpcJNmA5
Sw6TgyeQwu8LfHwNREczcojmk1wapytZvVivbNedNw7B6I1ujdPIsmnHWFWbiWv5
lfhcM77VLKmv3mwB/v1yRBEf3lNCgqn523N+S8Al9SjDkdLyibhuAWqZXUzsjqY=
=TbSp
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v4.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound
Pull last-minute ASoC fix from Mark Brown:
"This patch backs out a change that came in during the merge window
which selects a configuration for GPIO4 on pcm512x CODECs that may not
be suitable for all systems using the device. Changes for v4.1 will
make this properly configurable but for now it's safest to revert to
the v3.19 behaviour and leave the pin configuration alone.
Sorry for sending this direct at the last minute but due to the GPIO
misuse it'd be really good to get it in the release and I'd not
realised it hadn't been sent yet - between some travel, a job change
and other non-urgent fixes coming in I'd lost track of the urgency.
It's been in -next for several weeks now, is isolated to the driver
and fairly clear to inspection"
* tag 'asoc-fix-v4.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound:
ASoC: pcm512x: Remove hardcoding of pll-lock to GPIO4
Currently GPIO4 is hardcoded to output the pll-lock signal.
Unfortunately this is after the pll-out GPIO is configured which
is selectable in the device tree. Therefore it is not possible to
use GPIO4 for pll-out. Therefore this patch removes the
configuration of GPIO4.
Signed-off-by: Howard Mitchell <hm@hmbedded.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
ak4642 doesn't have Mono record, ak4643 have it, but not supported.
This patch fixes channel mismatch
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
RT286 can't do register reset. If the hardware power is still existing
in power off, rt286 will keep the register settings. So, we need to
restore the default register value in probe to make sure the cache value
is the same as the real register value.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently both the oscillator and the PLL are powered up in
set_bias_level. This can be problematic when using output clocks from
the wm8804 for other devices. The snd_soc_codec_set_pll API defines that
a clock should be available once the call returns, however, with all the
clocking controlled in set_bias_level this is not currently the case.
This patch enables pm_runtime for the wm8804, enabling both the
regulators and the oscillator when the chip resumes, and enabling the
PLL in the snd_soc_codec_set_pll call. Naturally the enabling the PLL
will also cause the chip to resume.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This change converts the driver to use DAPM to control the power for the
various blocks on the chip. As part of this change the existing controls
"TX Playback Switch" (controlled power for the SPDIF TX block) and "AIF
Playback Switch" (controlled power for the AIF block) are both removed,
as they are now redundant since the power state of those blocks is
controlled automatically by DAPM.
There are several benefits of this change, the most important of which
is this change adds support for powering down the SPDIF RX block. The RX
block will automatically assume control of the PLL on the chip when it
is receiving a signal, so leaving this enabled all the time as was
currently done in the driver can be problematic. An incoming SPDIF signal
that is not being used can completely destroy the clocking for an in use
TX signal. But this change ensures that the RX block will only be
powered when the user intends to be receiving data, thus avoiding this
issue.
Additional benefits include the chip being simpler to operate as the
power no longer needs to be manually controlled between use-cases and a
small power saving (although it is acknowledged that this is likely
unimportant in the typical use-cases for this chip).
Signed-off-by: Sapthagiri Baratam <sapthagiri.baratam@incubesol.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To fix pop noise when shutdown,the pop noise during shutdown
is the pmic cutoff power of codec without any notice.
Signed-off-by: jay.xu <xjq@rock-chips.com>
Signed-off-by: zhengxing <zhengxing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It is best to use the physical reset if it is available. This patch adds
support for a GPIO controlled physical reset for the chip.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The earpiece on wm5102 is mono, thus there is no output 3R. Don't toggle
the volume update bits for this output, although worth noting that doing
so had no negative effects it is just redundant.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The delay time after a reset in the codec probe callback was too short,
and did not work on certain hw because the codec needs more time to
power on. This increases the delay time from 1us to 1ms.
Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
The wm8350 driver is the last driver that still uses the delayed_work field
from the snd_soc_dapm_context struct. Moving this over to the driver's
private data struct will allow us to remove the field from the DAPM context,
which will drastically reduce its size.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When being powered on, either initially on probe or when resuming from
suspend, the wm8971 configures the device for quick output capacitor
charging. Since the charging can take a rather long time (up to multiple
seconds) it is done asynchronously without blocking. A delayed work item is
run once the charging is finished and the device is switched to the target
bias level.
This all done asynchronously to the regular DAPM sequence accessing the same
data structures and registers without any looking, which can lead to race
conditions. Furthermore this potentially delays the start of stream on the
CODEC while the rest of the system is already up and running, meaning the
first bytes of audio are lost. It also does no comply with the assumption of
the DAPM core that if set_bias_level() returned successfully the device will
be at the requested bias level.
This patch slightly refactors things and makes sure that the caps charging
is properly integrated into the DAPM sequence. When transitioning from
SND_SOC_BIAS_OFF to SND_SOC_BIAS_STANDBY the part will be put into fast
charging mode and a work item will be scheduled that puts it back into
standby charging once the charging period has elapsed. If a playback or
capture stream is started while charging is in progress the driver will now
wait in SND_SOC_BIAS_PREPARE until the charging is done. This makes sure
that charging is done asynchronously in the background when the chip is
idle, but at the same time makes sure that playback/capture is not started
before the charging is done.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When being powered on, either initially on probe or when resuming from
suspend, the wm8971 configures the device for quick output capacitor
charging. Since the charging can take a rather long time (up to multiple
seconds) it is done asynchronously without blocking. A delayed work item is
run once the charging is finished and the device is switched to the target
bias level.
This all done asynchronously to the regular DAPM sequence accessing the same
data structures and registers without any looking, which can lead to race
conditions. Furthermore this potentially delays the start of stream on the
CODEC while the rest of the system is already up and running, meaning the
first bytes of audio are lost. It also does no comply with the assumption of
the DAPM core that if set_bias_level() returned successfully the device will
be at the requested bias level.
This patch slightly refactors things and makes sure that the caps charging
is properly integrated into the DAPM sequence. When transitioning from
SND_SOC_BIAS_OFF to SND_SOC_BIAS_STANDBY the part will be put into fast
charging mode and a work item will be scheduled that puts it back into
standby charging once the charging period has elapsed. If a playback or
capture stream is started while charging is in progress the driver will now
wait in SND_SOC_BIAS_PREPARE until the charging is done. This makes sure
that charging is done asynchronously in the background when the chip is
idle, but at the same time makes sure that playback/capture is not started
before the charging is done.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The delayed work used by the wm8971 driver to manage the caps charging
doesn't have any special requirements that would justify using a custom
workqueue, just use the generic system_power_efficient_wq instead.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patchset include two new extcon driver and fix minor issue of extcon
driver.
Detailed description for patchset:
1. new extcon-max77843.c and extcon-usb-gpio.c extcon driver
- extcon-max77843.c driver support the MAXIM MAX77843 MUIC (Micor-USB Interface
Controller) device which handles the various external connectors such as TA/USB
/USB-HOST/JIG and so on.
- extcon-usb-gpio.c driver support the USB and USB-HOST cable detection by
using the GPIO pin which is connected to USB ID pin. This GPIO pin updates the
USB cable states.
2. Rename the filename of extcon core driver and add missing locking mechanism
- Rename the previous extcon-class driver.c as extcon.c because '-class'
postfix is not necessary word.
- extcon core driver (extcon.c) used the raw_notifier_chain. It must be
protected by locking mechanism to avoid the list changing while
extcon_update_state() is executed.
3. Fix minor issue of extcon drviers
- Fix cable name by using the capital letter instead of small letter on
extcon-max77693.c driver.
- Clean-up code of extcon-arizona.c to detect headphone cable.
- Fix the wrong return type and variable type on extcon-max77843.c.
- Fix the checkpatch warning of all extcon drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJVGLj3AAoJEJzN3yze689TgjAQAI61DDF9E77ezOQlHdtWPmyN
d2Ny59zvioL3SjKX1zBWQ3Fjj76u0tvvMknVtOBemucz4jJtDNfrsslbHf6zGu7V
2/nHtGw+PvsawSfUxYfyk8zpXkhQmEekLQICzSxZYNntuFuh0xu+tidlWM5sStAP
SpJPENYXrMdQUPMoxowPJtgw6dLvIkG86Yk1DFoAQM7SKgsP6f3a4inlnQtajbf1
J93PRuir0ih06MhLin07BM97JetJ69uHJHjqzKZo1DvAHom8PgfmTqTZLcdFIu/A
itWtpGTOF2AH6BR5K0xrrAzzyoTwOXhBfY2xvy7zM9oTWV1zyZ9FQc/I0kFaeO8B
qcT7vSRMpbKciVw/xDnWjBFnOcE+p53SvBQI7p//8pUVoP3P4DdFXUBmwHzWMeCC
4v7BSFo+LhqbO1vhOBkiTbsraIiTVFNI62b68AE2HwXmO4pjlMifgLrudNdns9QW
7lqXpdzD1Mbk7yfUVtcvl6xOIPoKD1No37C/iTX2hqLyNwiLIt0VNEvEEO3S6rqX
2b3CM6JJOsvyMix5+mWlxlmFEPqdpFf3+vvhsviI68cY7617LggKxZsxm1wSe5hO
faAQMnj7W51YO9t9Umat95LYIMxGkwdilH/n61ocQbV06qwIMro9Ke+hzxzxupyI
9l4l6Y4j5PH4wTIA+Pty
=LkOG
-----END PGP SIGNATURE-----
Merge tag 'extcon-next-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon for v4.1
This patchset include two new extcon driver and fix minor issue of extcon
driver.
Detailed description for patchset:
1. new extcon-max77843.c and extcon-usb-gpio.c extcon driver
- extcon-max77843.c driver support the MAXIM MAX77843 MUIC (Micor-USB Interface
Controller) device which handles the various external connectors such as TA/USB
/USB-HOST/JIG and so on.
- extcon-usb-gpio.c driver support the USB and USB-HOST cable detection by
using the GPIO pin which is connected to USB ID pin. This GPIO pin updates the
USB cable states.
2. Rename the filename of extcon core driver and add missing locking mechanism
- Rename the previous extcon-class driver.c as extcon.c because '-class'
postfix is not necessary word.
- extcon core driver (extcon.c) used the raw_notifier_chain. It must be
protected by locking mechanism to avoid the list changing while
extcon_update_state() is executed.
3. Fix minor issue of extcon drviers
- Fix cable name by using the capital letter instead of small letter on
extcon-max77693.c driver.
- Clean-up code of extcon-arizona.c to detect headphone cable.
- Fix the wrong return type and variable type on extcon-max77843.c.
- Fix the checkpatch warning of all extcon drivers.
Trivial typo fix.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Anish Kumar <Anish.Kumar@maximintegrated.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver will set RT5645_DEPOP_MAN bit in headphone power up
depop process. We need to restore it in headphone power down
process. Otherwise, we will get headphone noise when push button
function is enabled.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In codec bias level off, we need to disable gate mode with MCLK
for power saving. It is set by one bit. We don't need to write
while register for that.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
RT5645 doesn't support auto incrementing writes so driver should set
the use_single_rw flag for regmap.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rt5650 and rt5645 use different register bits for format configuration.
This patch modifies rt5645_hw_params and rt5645_set_dai_fmt to support
both codecs.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The WM8741 DAC supports the following typical audio sampling rates:
44.1kHz, 88.2kHz, 176.4kHz (eg: with a master clock of 22.5792MHz)
32kHz, 48kHz, 96kHz, 192kHz (eg: with a master clock of 24.576MHz)
For the rates lists, we should use 82000 instead of 88235, 176400
instead of 1764000 and 192000 instead of 19200 (seems to be a typo).
Signed-off-by: Sergej Sawazki <ce3a@gmx.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
ak4642 has power-save mode for stereo line to reduce pop noise.
This patch enables it.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It is worth to check the regmap_read result for ID check since it
is the first regmap_read. And we can check if there is any i2c
issue.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently GPIO4 is hardcoded to output the pll-lock signal.
Unfortunately this is after the pll-out GPIO is configured which
is selectable in the device tree. Therefore it is not possible to
use GPIO4 for pll-out. Therefore this patch removes the
configuration of GPIO4.
Signed-off-by: Howard Mitchell <hm@hmbedded.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
If den=1 and pllin_rate>20MHz then den and num are adjusted to 0
causing a divide by zero error a few lines further on. Therefore
this patch correctly scales num and den such that
pllin_rate/den < 20MHz as required in the device data sheet.
Signed-off-by: Howard Mitchell <hm@hmbedded.co.uk>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Cc: stable@vger.kernel.org
