Commit Graph

113969 Commits

Author SHA1 Message Date
Tiejun Chen
1cb6e06492 powerpc/book3e: support CONFIG_RELOCATABLE
book3e is different with book3s since 3s includes the exception
vectors code in head_64.S as it relies on absolute addressing
which is only possible within this compilation unit. So we have
to get that label address with got.

And when boot a relocated kernel, we should reset ipvr properly again
after .relocate.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
[scottwood: cleanup and ifdef removal]
Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-27 18:13:27 -05:00
Tiejun Chen
835c031c98 powerpc/booke64: Fix args to copy_and_flush
Convert r4/r5, not r6, to a virtual address when calling
copy_and_flush.  Otherwise, r3 is already virtual, and copy_to_flush
tries to access r3+r6, PAGE_OFFSET gets added twice.

This isn't normally seen because on book3e we normally enter with
the kernel at zero and thus skip copy_to_flush -- but it will be
needed for kexec support.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
[scottwood: split patch and rewrote changelog]
Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-27 18:13:26 -05:00
Tiejun Chen
68d1014019 powerpc/book3e-64: rename interrupt_end_book3e with __end_interrupts
Rename 'interrupt_end_book3e' to '__end_interrupts' so that the symbol
can be used by both book3s and book3e.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
[scottwood: edit changelog]
Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-27 18:13:26 -05:00
Scott Wood
f34b3e19fd powerpc/e6500: kexec: Handle hardware threads
The new kernel will be expecting secondary threads to be disabled,
not spinning.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-27 18:13:25 -05:00
Tiejun Chen
939fbf0080 powerpc/85xx: Implement 64-bit kexec support
Unlike 32-bit 85xx kexec, we don't do a core reset.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
[scottwood: edit changelog, and cleanup]
Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-27 18:13:25 -05:00
Scott Wood
eba5de8dc1 powerpc/fsl-booke-64: Don't limit ppc64_rma_size to one TLB entry
This is required for kdump to work when loaded at at an address that
does not fall within the first TLB entry -- which can easily happen
because while the lower limit is enforced via reserved memory, which
doesn't affect how much is mapped, the upper limit is enforced via a
different mechanism that does.  Thus, more TLB entries are needed than
would normally be used, as the total memory to be mapped might not be a
power of two.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-27 18:13:22 -05:00
Scott Wood
d9e1831a42 powerpc/85xx: Load all early TLB entries at once
Use an AS=1 trampoline TLB entry to allow all normal TLB1 entries to
be loaded at once.  This avoids the need to keep the translation that
code is executing from in the same TLB entry in the final TLB
configuration as during early boot, which in turn is helpful for
relocatable kernels (e.g. kdump) where the kernel is not running from
what would be the first TLB entry.

On e6500, we limit map_mem_in_cams() to the primary hwthread of a
core (the boot cpu is always considered primary, as a kdump kernel
can be entered on any cpu).  Each TLB only needs to be set up once,
and when we do, we don't want another thread to be running when we
create a temporary trampoline TLB1 entry.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-22 22:50:46 -05:00
Scott Wood
1930bb5ccf powerpc/fsl_pci: Don't set up inbound windows in kdump crash kernel
Otherwise, because the top end of the crash kernel is treated as the
absolute top of memory rather than the beginning of a reserved region,
in-flight DMA from the previous kernel that targets areas above the
crash kernel can trigger a storm of PCI errors.  We only do this for
kdump, not normal kexec, in case kexec is being used to upgrade to a
kernel that wants a different inbound memory map.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Mingkai Hu <Mingkai.hu@freescale.com>
2015-10-17 00:36:37 -05:00
Scott Wood
1112450a18 powerpc/85xx: Don't use generic timebase sync on 64-bit
85xx currently uses the generic timebase sync mechanism when
CONFIG_KEXEC is enabled, because 32-bit 85xx kexec support does a hard
reset of each core.  64-bit 85xx kexec does not do this, so we neither
need nor want this (nor is the generic timebase sync code built on
ppc64).

FWIW, I don't like the fact that the hard reset is done on 32-bit
kexec, and I especially don't like the timebase sync being triggered
only on the presence of CONFIG_KEXEC rather than actually booting in
that environment, but that's beyond the scope of this patch...

Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-17 00:36:36 -05:00
Scott Wood
9f640bf532 powerpc/fsl-corenet: Disable coreint if kexec is enabled
Problems have been observed in coreint (EPR) mode if interrupts are
left pending (due to the lack of device quiescence with kdump) after
having tried to deliver to a CPU but unable to deliver due to MSR[EE]
-- interrupts no longer get reliably delivered in the new kernel.  I
tried various ways of fixing it up inside the crash kernel itself, and
none worked (including resetting the entire mpic).  Masking all
interrupts and issuing EOIs in the crashing kernel did help a lot of
the time, but the behavior was not consistent.

Thus, stick to standard IACK mode when kdump is a possibility.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-17 00:36:36 -05:00
Scott Wood
01c593d749 powerpc/fsl-booke-64: Allow booting from the secondary thread
This allows SMP kernels to work as kdump crash kernels.  While crash
kernels don't really need to be SMP, this prevents things from breaking
if a user does it anyway (which is not something you want to only find
out once the main kernel has crashed in the field, especially if
whether it works or not depends on which cpu crashed).

Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-17 00:36:35 -05:00
poonam aggrwal
5224644551 powerpc/b4860: Renamed the L2 caches
To make provision for more than one L2 caches in the system, change the
name from L2 to L2_1; same as in T4 platforms.
* Also remove the L2 entry from common file
  "arch/powerpc/boot/dts/fsl/b4si-post.dtsi"
  Keep them only in separate files for b4860 and b4420.

Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-17 00:36:34 -05:00
Hongtao Jia
dc37374b9c powerpc/fsl: Move Freescale device tree files into fsl folder
It makes no sense that some Freescale device tree files are in fsl
directory while some others not. This patch move Freescale device tree
files into fsl folder. To do that the following two steps are made:
- Move Freescale device tree files into fsl folder.
- Update the include path in these files from "fsl/*.dtsi" to "*.dtsi".

Please add "fsl/" prefix when you make dtb using Makefile.

Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
[scottwood: fixed cuImage rule]
Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-17 00:36:34 -05:00
poonam aggrwal
2d80f651c8 powerpc/b4860: Removed LIODN register from sRIO node
In case of B4860 LIODN register for sRIO is not in GUTs block but in
the sRIO register space.

Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-17 00:36:33 -05:00
Andy Fleming
c383ee84e1 powerpc/85xx: Add support for Varisys Cyrus board
This board uses a P5020 chip, and boots just fine using
the corenet_generic code. The device tree is very similar to the
P5020DS, except that there is no Flash memory. The environment is,
instead, stored on an MMC card on the motherboard.

Signed-off-by: Andy Fleming <afleming@gmail.com>
[scottwood: fixed trailing whitespace]
Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-17 00:36:33 -05:00
Scott Wood
072daeed55 powerpc/fsl_pci: Check for get_user/probe_kernel_address failure
Signed-off-by: Scott Wood <scottwood@freescale.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hongtao Jia <hongtao.jia@freescale.com>
2015-10-17 00:35:41 -05:00
Zhao Qiang
a109752ea6 powerpc/t104xd4rdb: add DS26522 nodes to device tree
DS26522 is used for tdm, configured by SPI bus.
Add nodes under spi node to t104xd4rdb.dtsi.

Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-16 19:32:11 -05:00
Uwe Kleine-König
78c102c24c powerpc/dts: don't fall back to fsl,pq3-gpio for fsl,mpc8572-gpio
While the handling of fsl,pq3-gpio and fsl,mpc8572-gpio is done in the
same driver and the two hardly differ, the latter controller needs a
workaround for an erratum in the gpio_get callback. To make this
difference more explicit remove fsl,pq3-gpio from the list of
compatibles for mpc8572 machines.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-16 18:46:00 -05:00
Yangbo Lu
07e9117e43 powerpc/dts: Add and fix 1588 timer node for eTSEC
Add 1588 timer node in files:
arch/powerpc/boot/dts/bsc9131rdb.dtsi
arch/powerpc/boot/dts/bsc9132qds.dtsi
arch/powerpc/boot/dts/p1010rdb.dtsi
arch/powerpc/boot/dts/p1020rdb-pd.dts
arch/powerpc/boot/dts/p1021rdb-pc.dtsi
arch/powerpc/boot/dts/p1022ds.dtsi
arch/powerpc/boot/dts/p1025twr.dtsi
For P2020RDB-PC, registers' values should be calculated
based on default 1588 reference clock(300MHz) not 250MHz,
and fix this in file:
arch/powerpc/boot/dts/p2020rdb-pc.dtsi

Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-16 18:45:11 -05:00
chenhui zhao
881ea7d3f5 powerpc/corenet: use the mixed mode of MPIC when enabling CPU hotplug
Core reset may cause issue if using the proxy mode of MPIC.
Use the mixed mode of MPIC if enabling CPU hotplug.

Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-16 18:44:27 -05:00
Michael Ellerman
ad987fc8ea powerpc/xmon: Add some more elements to the existing PACA dump list
This patch adds a set of new elements to the existing PACA dump list
inside an xmon session which can be listed below improving the overall
xmon debug support.

With this patch, a typical xmon PACA dump looks something like this.

paca for cpu 0x0 @ c00000000fdc0000:
 possible             = yes
 present              = yes
 online               = yes
 lock_token           = 0x8000            	(0xa)
 paca_index           = 0x0               	(0x8)
 kernel_toc           = 0xc000000001393200	(0x10)
 kernelbase           = 0xc000000000000000	(0x18)
 kernel_msr           = 0xb000000000001033	(0x20)
 emergency_sp         = 0xc00000003fff0000	(0x28)
 mc_emergency_sp      = 0xc00000003ffec000	(0x2e0)
 in_mce               = 0x0               	(0x2e8)
 hmi_event_available  = 0x0               	(0x2ea)
 data_offset          = 0x1fe7b0000       	(0x30)
 hw_cpu_id            = 0x0               	(0x38)
 cpu_start            = 0x1               	(0x3a)
 kexec_state          = 0x0               	(0x3b)
 slb_shadow[0]:       = 0xc000000008000000 0x40016e7779000510
 slb_shadow[1]:       = 0xd000000008000001 0x400142add1000510
 vmalloc_sllp         = 0x510             	(0x1b8)
 slb_cache_ptr        = 0x4               	(0x1ba)
 slb_cache[0]:        = 0x000000000003f000
 slb_cache[1]:        = 0x0000000000000001
 slb_cache[2]:        = 0x0000000000000003
 slb_cache[3]:        = 0x0000000000001000
 slb_cache[4]:        = 0x0000000000001000
 slb_cache[5]:        = 0x0000000000000000
 slb_cache[6]:        = 0x0000000000000000
 slb_cache[7]:        = 0x0000000000000000
 dscr_default         = 0x0               	(0x58)
 __current            = 0xc000000001331e80	(0x290)
 kstack               = 0xc000000001393e30	(0x298)
 stab_rr              = 0x11              	(0x2a0)
 saved_r1             = 0xc0000001fffef5e0	(0x2a8)
 trap_save            = 0x0               	(0x2b8)
 soft_enabled         = 0x0               	(0x2ba)
 irq_happened         = 0x1               	(0x2bb)
 io_sync              = 0x0               	(0x2bc)
 irq_work_pending     = 0x0               	(0x2bd)
 nap_state_lost       = 0x0               	(0x2be)
 sprg_vdso            = 0x0               	(0x2c0)
 tm_scratch           = 0x8000000100009033	(0x2c8)
 core_idle_state_ptr  = (null)            	(0x2d0)
 thread_idle_state    = 0x0               	(0x2d8)
 thread_mask          = 0x0               	(0x2d9)
 subcore_sibling_mask = 0x0               	(0x2da)
 user_time            = 0x0               	(0x2f0)
 system_time          = 0x0               	(0x2f8)
 user_time_scaled     = 0x0               	(0x300)
 starttime            = 0x3f462418b5cf4   	(0x308)
 starttime_user       = 0x3f4622a57092a   	(0x310)
 startspurr           = 0xd62a5718        	(0x318)
 utime_sspurr         = 0x0               	(0x320)
 stolen_time          = 0x0               	(0x328)

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
[mpe: Endian swap slb_shadow before display, minor formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15 20:32:02 +11:00
Sam bobroff
0c23a88ccc powerpc/xmon: Paginate kernel log buffer display
The kernel log buffer is often much longer than the size of a terminal
so paginate it's output.

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15 20:32:02 +11:00
Sam bobroff
958b7c8050 powerpc/xmon: Paged output for paca display
The paca display is already more than 24 lines, which can be problematic
if you have an old school 80x24 terminal, or more likely you are on a
virtual terminal which does not scroll for whatever reason.

This patch adds a new command "#", which takes a single (hex) numeric
argument: lines per page. It will cause the output of "dp" and "dpa"
to be broken into pages, if necessary.

Sample output:

0:mon> # 10
0:mon> dp1
paca for cpu 0x1 @ c00000000fdc0480:
 possible         = yes
 present          = yes
 online           = yes
 lock_token       = 0x8000            	(0x8)
 paca_index       = 0x1               	(0xa)
 kernel_toc       = 0xc000000000eb2400	(0x10)
 kernelbase       = 0xc000000000000000	(0x18)
 kernel_msr       = 0xb000000000001032	(0x20)
 emergency_sp     = 0xc00000003ffe8000	(0x28)
 mc_emergency_sp  = 0xc00000003ffe4000	(0x2e0)
 in_mce           = 0x0               	(0x2e8)
 data_offset      = 0x7f170000        	(0x30)
 hw_cpu_id        = 0x8               	(0x38)
 cpu_start        = 0x1               	(0x3a)
 kexec_state      = 0x0               	(0x3b)
[Hit a key (a:all, q:truncate, any:next page)]
0:mon>
 __current        = 0xc00000007e696620	(0x290)
 kstack           = 0xc00000007e6ebe30	(0x298)
 stab_rr          = 0xb               	(0x2a0)
 saved_r1         = 0xc00000007ef37860	(0x2a8)
 trap_save        = 0x0               	(0x2b8)
 soft_enabled     = 0x0               	(0x2ba)
 irq_happened     = 0x1               	(0x2bb)
 io_sync          = 0x0               	(0x2bc)
 irq_work_pending = 0x0               	(0x2bd)
 nap_state_lost   = 0x0               	(0x2be)
0:mon>

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[mpe: Use bool, make some variables static]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15 20:32:01 +11:00
Christophe Jaillet
b340587e68 powerpc/mpc5xxx: Use of_get_next_parent to simplify code
of_get_next_parent can be used to simplify the while() loop and
avoid the need of a temp variable.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15 20:32:01 +11:00
Christophe Jaillet
1def37586f powerpc/numa: Use of_get_next_parent to simplify code
of_get_next_parent can be used to simplify the while() loop and
avoid the need of a temp variable.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15 20:32:00 +11:00
Paul Gortmaker
5fab1d1cb1 powerpc: Delete old orphaned PrPMC 280/2800 DTS and boot file.
In commit 3c8464a9b1 ("powerpc:
Delete old PrPMC 280/2800 support") we got rid of most of the C
code, and the Makefile/Kconfig hooks, but it seems I left the
platform's DTS file orphaned in the tree as well as the boot code.
Here we get rid of them both.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15 20:32:00 +11:00
Stephen Rothwell
4c8123181d powerpc: discard .exit.data at runtime
.exit.text is discarded at run time and there are some references from
that to .exit.data, so we need to discard .exit.data at run time as well.

Fixes these errors:

`.exit.data' referenced in section `.exit.text' of drivers/built-in.o: defined in discarded section `.exit.data' of drivers/built-in.o
`.exit.data' referenced in section `.exit.text' of drivers/built-in.o: defined in discarded section `.exit.data' of drivers/built-in.o

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15 20:31:59 +11:00
Gavin Shan
54f9a64a36 powerpc/eeh: atomic_dec_if_positive() to update passthru count
No need to have two atomic opertions (update and fetch/check) when
decreasing PE's number of passed devices as one atomic operation
is enough.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15 20:31:58 +11:00
Andrew Donnellan
6b8b252f40 powerpc/pci: export pcibios_free_controller()
Export pcibios_free_controller(), so it can be used by the cxl module to
free virtual PHBs.

Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15 20:31:57 +11:00
Sam bobroff
a34236155a powerpc: Individual System V IPC system calls
This patch provides individual system call numbers for the following
System V IPC system calls, on PowerPC, so that they do not need to be
multiplexed:
* semop, semget, semctl, semtimedop
* msgsnd, msgrcv, msgget, msgctl
* shmat, shmdt, shmget, shmctl

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15 20:31:57 +11:00
Michael Ellerman
f7688056cb powerpc/pseries: Drop always true CONFIG_PSERIES_MSI
Now that pseries selects PCI_MSI && PCI, EEH will always be true, and
therefore CONFIG_PSERIES_MSI will always be true. So drop it, and move
msi.o to obj-y.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15 20:31:56 +11:00
Michael Ellerman
44f2aecfd0 powerpc/pseries: Move PCI objects to obj-y
Make it entirely clear in the Makefile that we always build the pci
related files by moving them to obj-y.

Note that CONFIG_EEH is now always enabled on pseries, because it
depends on PSERIES && PCI.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15 20:31:56 +11:00
Michael Ellerman
84eb9e612b powerpc/pseries: Remove use of CONFIG_PCI
Now that we always have CONFIG_PCI=y for pseries, we can stop guarding
code with CONFIG_PCI ifdefs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15 20:31:55 +11:00
Michael Ellerman
4c9cd468b3 powerpc/pseries: Make PCI non-optional
The pseries build with PCI=n looks to have been broken for at least 5
years, and no one's noticed or cared.

Following the obvious breakages backward, the first commit I can find
that builds is the parent of 2eb4afb69f ("powerpc/pci: Move pseries
code into pseries platform specific area") from April 2009.

A distro would never ship a PCI=n kernel, so it is only useful for folks
building custom kernels. Also on KVM the virtio devices appear on PCI,
so it would only be useful if you were building kernels specifically to
run on PowerVM and with no PCI devices.

The added code complexity, and testing load (which we've clearly not
been doing), is not justified by the small reduction in kernel size for
such a niche use case.

So just make PCI non-optional on pseries.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15 20:31:54 +11:00
Aneesh Kumar K.V
891121e6c0 powerpc/mm: Differentiate between hugetlb and THP during page walk
We need to properly identify whether a hugepage is an explicit or
a transparent hugepage in follow_huge_addr(). We used to depend
on hugepage shift argument to do that. But in some case that can
result in wrong results. For ex:

On finding a transparent hugepage we set hugepage shift to PMD_SHIFT.
But we can end up clearing the thp pte, via pmdp_huge_get_and_clear.
We do prevent reusing the pfn page via the usage of
kick_all_cpus_sync(). But that happens after we updated the pte to 0.
Hence in follow_huge_addr() we can find hugepage shift set, but transparent
huge page check fail for a thp pte.

NOTE: We fixed a variant of this race against thp split in commit
691e95fd73
("powerpc/mm/thp: Make page table walk safe against thp split/collapse")

Without this patch, we may hit the BUG_ON(flags & FOLL_GET) in
follow_page_mask occasionally.

In the long term, we may want to switch ppc64 64k page size config to
enable CONFIG_ARCH_WANT_GENERAL_HUGETLB

Reported-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-12 15:30:09 +11:00
Aneesh Kumar K.V
ec2640b114 powerpc/mm: Disable hugepd for 64K page size.
After commit e2b3d202d1
("powerpc: Switch 16GB and 16MB explicit hugepages to a
different page table format"), we don't need to support
is_hugepd() for 64K page size.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-12 15:29:59 +11:00
Colin Ian King
c13e1c05b2 powerpc/pseries/hvcserver: don't memset pi_buff if it is null
pi_buff is being memset before it is sanity checked. Move the
memset after the null pi_buff sanity check to avoid an oops.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-09 08:03:03 +11:00
Aneesh Kumar K.V
f78f7ed726 powerpc: Fix _ALIGN_* errors due to type difference.
This avoid errors like

        unsigned int usize = 1 << 30;
        int size = 1 << 30;
        unsigned long addr = 64UL << 30 ;

        value = _ALIGN_DOWN(addr, usize); -> 0
        value = _ALIGN_DOWN(addr, size);  -> 0x1000000000

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-09 08:02:25 +11:00
Samuel Mendoza-Jonas
1b70386c99 powerpc/kexec: Wait 1s for secondaries to enter OPAL
Always include a timeout when waiting for secondary cpus to enter OPAL
in the kexec path, rather than only when crashing.

Signed-off-by: Samuel Mendoza-Jonas <sam.mj@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-06 21:57:42 +11:00
Christophe Leroy
255e8e046c powerpc/8xx: Shorten irq_chip name for the SIU
show_interrupts() expects the irq_chip name to be max 8 characters
otherwise everything get misaligned

# cat /proc/interrupts
           CPU0
 17:          0   CPM PIC   0 Level     error
 19:          0  MPC8XX SIU  15 Level     tbint
 20:         90   CPM PIC   4 Level     cpm_uart
 38:      29746  MPC8XX SIU   5 Level     fs_enet-mac
 39:          0  MPC8XX SIU   7 Level     fs_enet-mac
 47:        401   CPM PIC   5 Level     fsl_spi
 68:          1  MPC8XX SIU   2 Level     phy_interrupt, phy_interrupt, phy_interrupt
LOC:    7225485   Local timer interrupts for timer event device
LOC:          9   Local timer interrupts for others
SPU:          0   Spurious interrupts
PMI:          0   Performance monitoring interrupts
MCE:          0   Machine check exceptions

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-06 21:54:42 +11:00
Denis Kirjanov
cb2d3883c6 powerpc/msi: Free the bitmap if it was slab allocated
During the MSI bitmap test on boot kmemleak spews the following trace:

unreferenced object 0xc00000016e86c900 (size 64):
    comm "swapper/0", pid 1, jiffies 4294893173 (age 518.024s)
    hex dump (first 32 bytes):
	00 00 01 ff 7f ff 7f 37 00 00 00 00 00 00 00 00
	.......7........
	ff ff ff ff ff ff ff ff 01 ff ff ff ff
	ff ff ff
	................
	backtrace:
	[<c00000000003eebc>] .zalloc_maybe_bootmem+0x3c/0x380
	[<c000000000042d6c>] .msi_bitmap_alloc+0x3c/0xb0
	[<c000000000a9aff8>] .msi_bitmap_selftest+0x30/0x2b4
	[<c0000000000090f4>] .do_one_initcall+0xd4/0x270
	[<c000000000a8e250>] .kernel_init_freeable+0x1a0/0x280
	[<c000000000009b5c>] .kernel_init+0x1c/0x120
	[<c000000000007fbc>] .ret_from_kernel_thread+0x58/0x9c

Add a flag to msi_bitmap for tracking allocations from slab and memblock
so we can properly free/handle memory in msi_bitmap_free().

Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
[mpe: Reword changelog & use bitmap_from_slab in the if]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-05 21:32:50 +11:00
Andy Shevchenko
06bacefcbd powerpc/pseries: re-use code from of_helpers module
The derive_parent() has similar semantics to what we have in newly introduced
of_helpers module. The replacement reduces code base and propagates the actual
error code to the caller.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-05 21:11:28 +11:00
Andy Shevchenko
a46d988409 powerpc/pseries: handle nodes without '/'
In case we have node without '/' strrchr() returns NULL which might lead to
crash. Replace strrchr() by kbasename() and modify condition to avoid such
behaviour.

Suggested-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-05 21:11:27 +11:00
Andy Shevchenko
a030e1e4bb powerpc/pseries: replace kmalloc + strlcpy
The helper kstrndup() will do the same in one line.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-05 21:11:26 +11:00
Andy Shevchenko
dc85aaed64 powerpc/pseries: fix a potential memory leak
In case we have a full node name like /foo/bar and /foo is not found the
parent_path left unfreed. So, free a memory before return to a caller.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-05 21:11:25 +11:00
Andy Shevchenko
948ad1acaf powerpc/pseries: extract of_helpers module
Extract a new module to share the code between other modules.

There is no functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-05 21:11:24 +11:00
Christophe Jaillet
b6080db4f4 powerpc/nvram: Fix function name in some errors messages.
'nvram_create_os_partition' should be 'nvram_create_partition'.
Use __func__ to have it right, as done elsewhere in this file.

Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-02 22:55:05 +10:00
Christophe Jaillet
7d52318717 powerpc/nvram: Add missing kfree in error path
If 'nvram_write_header' fails, then 'new_part' should be freed, otherwise,
there is a memory leak.

Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-02 22:54:55 +10:00
Michael Ellerman
2adc48a691 powerpc: Add ppc64le_defconfig
Based directly on ppc64_defconfig using merge_config.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-01 16:52:03 +10:00
Aneesh Kumar K.V
65d3223a85 powerpc/mm: Add virt_to_pfn and use this instead of opencoding
This add helper virt_to_pfn and remove the opencoded usage of the
same.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-01 16:52:02 +10:00