This replaces all code in fs/compat_ioctl.c that translated
ioctl arguments into a in-kernel structure, then performed
do_ioctl under set_fs(KERNEL_DS), with code that allocates
data on the user stack and can call the VFS ioctl handler
under USER_DS.
This is done as a hardening measure because the caller
does not know what kind of ioctl handler will be invoked,
only that no corresponding compat_ioctl handler exists and
what the ioctl command number is. The accidental
invocation of an unlocked_ioctl handler that unexpectedly
calls copy_to_user could be a severe security issue.
Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In code in fs/compat_ioctl.c that translates ioctl arguments
into a in-kernel structure, then performs sys_ioctl, possibly
under set_fs(KERNEL_DS), this commit changes the sys_ioctl
calls to do_ioctl calls. do_ioctl is a new function that does
the same thing as sys_ioctl, but doesn't look up the fd again.
This change is made to avoid (potential) security issues
because of ioctl handlers that accept one of the ioctl
commands I2C_FUNCS, VIDEO_GET_EVENT, MTIOCPOS, MTIOCGET,
TIOCGSERIAL, TIOCSSERIAL, RTC_IRQP_READ, RTC_EPOCH_READ.
This can happen for multiple reasons:
- The ioctl command number could be reused.
- The ioctl handler might not check the full ioctl
command. This is e.g. true for drm_ioctl.
- The ioctl handler is very special, e.g. cuse_file_ioctl
The real issue is that set_fs(KERNEL_DS) is used here,
but that's fixed in a separate commit
"compat_ioctl: don't call do_ioctl under set_fs(KERNEL_DS)".
This change mitigates potential security issues by
preventing a race that permits invocation of
unlocked_ioctl handlers under KERNEL_DS through compat
code even if a corresponding compat_ioctl handler exists.
So far, no way has been identified to use this to damage
kernel memory without having CAP_SYS_ADMIN in the init ns
(with the capability, doing reads/writes at arbitrary
kernel addresses should be easy through CUSE's ioctl
handler with FUSE_IOCTL_UNRESTRICTED set).
[AV: two missed sys_ioctl() taken care of]
Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When there is an error copying a chunk dm-snapshot can incorrectly hold
associated bios indefinitely, resulting in hung IO.
The function copy_callback sets pe->error if there was error copying the
chunk, and then calls complete_exception. complete_exception calls
pending_complete on error, otherwise it calls commit_exception with
commit_callback (and commit_callback calls complete_exception).
The persistent exception store (dm-snap-persistent.c) assumes that calls
to prepare_exception and commit_exception are paired.
persistent_prepare_exception increases ps->pending_count and
persistent_commit_exception decreases it.
If there is a copy error, persistent_prepare_exception is called but
persistent_commit_exception is not. This results in the variable
ps->pending_count never returning to zero and that causes some pending
exceptions (and their associated bios) to be held forever.
Fix this by unconditionally calling commit_exception regardless of
whether the copy was successful. A new "valid" parameter is added to
commit_exception -- when the copy fails this parameter is set to zero so
that the chunk that failed to copy (and all following chunks) is not
recorded in the snapshot store. Also, remove commit_callback now that
it is merely a wrapper around pending_complete.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
This is the final small set of ARM SoC bug fixes for linux-4.4,
almost all regressions:
OMAP: data corruption on the Nokia N900 flash
Allwinner: Two defconfig change to get USB working again
ARM Versatile: Interrupt numbers gone bad after an older bug fix
Nomadik: Crashes from incorrect L2 cache settings
VIA vt8500: SD/MMC support on WM8650 never worked
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Z1E0
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is the final small set of ARM SoC bug fixes for linux-4.4, almost
all regressions:
OMAP:
- data corruption on the Nokia N900 flash
Allwinner:
- Two defconfig change to get USB working again
ARM Versatile:
- Interrupt numbers gone bad after an older bug fix
Nomadik:
- Crashes from incorrect L2 cache settings
VIA vt8500:
- SD/MMC support on WM8650 never worked"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
dts: vt8500: Add SDHC node to DTS file for WM8650
ARM: Fix broken USB support in multi_v7_defconfig for sunxi devices
ARM: versatile: fix MMC/SD interrupt assignment
ARM: nomadik: set latencies to 8 cycles
ARM: OMAP2+: Fix onenand rate detection to avoid filesystem corruption
ARM: Fix broken USB support in sunxi_defconfig
a patch found in your master branch but not yet in the kvm/next branch
that is destined for 4.5.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJWj+yRAAoJEL/70l94x66DulYH/0OGP+yIHDDFlBqtPRm6q0pr
r8pSVRPPd4GY2SOJDBsBvMmWphFSYKIoCTyMbFnikADHM2yh/pycwLU/uzCM5xQl
uABMsCUntwbGaKq+A4bOvsNO49ueRCkML4ToVuKNTeuEKRYfdnlj3XcAMMgsUfEF
QGz8W2cm9xPn69df91cfBuFLLFeQVv2XsjA5WpqzzvWy5HEs1F07aVh57TI4j8OF
eFdn3Lkes9Ync70KjEy2QKe2Su0EWjderE0oqAORKomwZFVCYv/Vg1wERJYsugg5
UyYCY2j1tKlycKYDnO47L1xoS9JgMHY05OsH08Sn/EXBjRjnEVwTyco5pGPmuNA=
=5Lst
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fix from Paolo Bonzini:
"A simple fix. I'm sending it before the merge window, because it
refines a patch found in your master branch but not yet in the
kvm/next branch that is destined for 4.5"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: x86: only channel 0 of the i8254 is linked to the HPET
Just one obvious fix that adds a missing function argument in
ACPI code introduced recently (Kees Cook).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=XAk2
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.4-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Just one obvious fix that adds a missing function argument in ACPI
code introduced recently (Kees Cook)"
* tag 'pm+acpi-4.4-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / property: avoid leaking format string into kobject name
Pull x86 fixes from Ingo Molnar:
"A handful of x86 fixes:
- a syscall ABI fix, fixing an Android breakage
- a Xen PV guest fix relating to the RTC device, causing a
non-working console
- a Xen guest syscall stack frame fix
- an MCE hotplug CPU crash fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/numachip: Fix NumaConnect2 MMCFG PCI access
x86/entry: Restore traditional SYSENTER calling convention
x86/entry: Fix some comments
x86/paravirt: Prevent rtc_cmos platform device init on PV guests
x86/xen: Avoid fast syscall path for Xen PV guests
x86/mce: Ensure offline CPUs don't participate in rendezvous process
Pull perf fixes from Ingo Molnar:
"Two core subsystem fixes, plus a handful of tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix race in swevent hash
perf: Fix race in perf_event_exec()
perf list: Robustify event printing routine
perf list: Add support for PERF_COUNT_SW_BPF_OUT
perf hists browser: Fix segfault if use symbol filter in cmdline
perf hists browser: Reset selection when refresh
perf hists browser: Add NULL pointer check to prevent crash
perf buildid-list: Fix return value of perf buildid-list -k
perf buildid-list: Show running kernel build id fix
Pull block revert from Jens Axboe:
"The previous pull request had a split fix for NVMe, however there are
corner cases where that ends up blowing up.
So let's revert it for 4.4. The regression isn't introduced in this
cycle, and it's "just" a performance regression, not a
stability/integrity issue"
* 'for-linus' of git://git.kernel.dk/linux-block:
Revert "block: Split bios on chunk boundaries"
Late fixes for 4.4 are three fixes for drivers which include a
revert of mic-x100 fix which is causing regression, xgene fix for
double IRQ and async_tx fix to use GFP_NOWAIT
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jYJY
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-4.4' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Late fixes for 4.4 are three fixes for drivers which include a revert
of mic-x100 fix which is causing regression, xgene fix for double IRQ
and async_tx fix to use GFP_NOWAIT"
* tag 'dmaengine-fix-4.4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: xgene-dma: Fix double IRQ issue by setting IRQ_DISABLE_UNLAZY flag
async_tx: use GFP_NOWAIT rather than GFP_IO
dmaengine: Revert "dmaengine: mic_x100: add missing spin_unlock"
Pull dmi fix from Jean Delvare.
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware: dmi_scan: Fix UUID endianness for SMBIOS >= 2.6
A slightly higher volume than a new year's wish, but not too
worrisome: a large LOC is only for HD-audio device-specific quirks,
so fairly safe to apply. The rest ASoC fixes are all trivial and
small; a simple replacement of mutex call with nested lock version,
a few Arizona and Realtek codec fixes, and a regression fix for
Skylake firmware handling.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=XSAp
-----END PGP SIGNATURE-----
Merge tag 'sound-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A slightly higher volume than a new year's wish, but not too
worrisome: a large LOC is only for HD-audio device-specific quirks, so
fairly safe to apply. The rest ASoC fixes are all trivial and small;
a simple replacement of mutex call with nested lock version, a few
Arizona and Realtek codec fixes, and a regression fix for Skylake
firmware handling"
* tag 'sound-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: Intel: Skylake: Fix the memory leak
ASoC: Intel: Skylake: Revert previous broken fix memory leak fix
ASoC: Use nested lock for snd_soc_dapm_mutex_lock
ASoC: rt5645: add sys clk detection
ALSA: hda - Add keycode map for alc input device
ALSA: hda - Add mic mute hotkey quirk for Lenovo ThinkCentre AIO
ASoC: arizona: Fix bclk for sample rates that are multiple of 4kHz
Whilst inspecting the asm for clflush_cache_range() and some perf profiles
that required extensive flushing of single cachelines (from part of the
intel-gpu-tools GPU benchmarks), we noticed that gcc was reloading
boot_cpu_data.x86_clflush_size on every iteration of the loop. We can
manually hoist that read which perf regarded as taking ~25% of the
function time for a single cacheline flush.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sai Praneeth <sai.praneeth.prakhya@intel.com>
Link: http://lkml.kernel.org/r/1452246933-10890-1-git-send-email-chris@chris-wilson.co.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Trace the following Hyper SynIC events:
* set msr
* set sint irq
* ack sint
* sint irq eoi
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
CC: Gleb Natapov <gleb@kernel.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: qemu-devel@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Consolidate updating the Hyper-V SynIC timers in a
single place: on guest entry in processing KVM_REQ_HV_STIMER
request. This simplifies the overall logic, and makes sure
the most current state of msrs and guest clock is used for
arming the timers (to achieve that, KVM_REQ_HV_STIMER
has to be processed after KVM_REQ_CLOCK_UPDATE).
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
CC: Gleb Natapov <gleb@kernel.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: qemu-devel@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU zero-inits Hyper-V SynIC vectors. We should allow that,
and don't reject zero values if set by the host.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
CC: Gleb Natapov <gleb@kernel.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: qemu-devel@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hypervisor Function Specification(HFS) doesn't require
to disable SynIC timer at timer config write if timer->count = 0.
So drop this check, this allow to load timers MSR's
during migration restore, because config are set before count
in QEMU side.
Also fix condition according to HFS doc(15.3.1):
"It is not permitted to set the SINTx field to zero for an
enabled timer. If attempted, the timer will be
marked disabled (that is, bit 0 cleared) immediately."
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
CC: Gleb Natapov <gleb@kernel.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: qemu-devel@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split stimer_expiration() into two parts - timer expiration message
sending and timer restart/cleanup based on timer state(config).
This also fixes a bug where a one-shot timer message whose delivery
failed once would get lost for good.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
CC: Gleb Natapov <gleb@kernel.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: qemu-devel@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be used in future to start Hyper-V SynIC timer
in several places by one logic in one function.
Changes v2:
* drop stimer->count == 0 check inside stimer_start()
* comment stimer_start() assumptions
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
CC: Gleb Natapov <gleb@kernel.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: qemu-devel@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function stimer_stop() is called in one place
so remove the function and replace it's call by function
content.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
CC: Gleb Natapov <gleb@kernel.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: qemu-devel@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the numbers now overlap, it makes sense to enumerate
them in asm/kvm_host.h rather than linux/kvm_host.h. Functions
that refer to architecture-specific requests are also moved
to arch/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Leave room for 4 more arch-independent requests.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
[Takuya moved all subsequent constants to fill the void, but that
is useless in view of the following patches. So this change looks
nothing like the original. - Paolo]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- allow the runtime instrumentation support inside the guests
- remove a useless memory barrier
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=Quu/
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-4.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Feature and fix for 4.5
- allow the runtime instrumentation support inside the guests
- remove a useless memory barrier
Currently we don't synthesize data mmap by default. It depends on -d
option, that enables data address sampling.
But we've seen cases (softice) where DWARF unwinder went through non
executable mmaps, which we need to lookup in MAP__VARIABLE tree.
Making data mmaps to be synthesized for dwarf unwind as well.
Reported-by: Noel Grandin <noelgrandin@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20160107133022.GA32115@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We've seen cases (softice) where DWARF unwinder went through non
executable mmaps, which we need to lookup in MAP__VARIABLE tree.
Reported-and-Tested-by: Noel Grandin <noelgrandin@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We've seen cases (softice) where DWARF unwinder went through non
executable mmaps, which we need to lookup in MAP__VARIABLE tree.
Reported-and-Tested-by: Noel Grandin <noelgrandin@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The find_map helper is already there, so let's use it.
Also we're going to introduce wider search in following patch, so it'll
be easier to make this change on single place.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Noel Grandin <noelgrandin@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Replacing them with perf_evsel__(enable|disable).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf record' uses perf_evsel__open() to open events and passes the
evsel->cpus and evsel->threads. Many tests and some tools instead use
perf_evlist__open() which passes instead evlist->cpus and
evlist->threads.
Make perf_evlist__open() follow the 'perf record' behaviour so that a
consistent approach is taken.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The link resume logic uses a 200msec delay while debouncing
the SControl register. The rationale behind that delay is
to accommodate some PHYs that behave badly if their SStatus/
SControl registers are pounded immediately on resume.
The Broadcom STB SATA PHY does not seem to have this issue.
This patch introduces a new link flag that allows platforms
to skip the debounce delay if it isn't needed.
Signed-off-by: Danesh Petigara <dpetigara@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
on Nokia N900.
Looks like we have a GPMC bus timing bug that has gone unnoticed
because of bootloader configured registers until few days ago. We
are not detecting the onenand clock rate properly unless we have
CONFIG_OMAP_GPMC_DEBUG set and this causes onenand corruption
that can be easily be reproduced.
There seems to be also an additional bug still lurking around for
onenand corruption. But that is still being investigated and
it does not seem to be GPMC timings related.
Meanwhile, it would be good to get this fix into v4.4 to prevent
wrong timings from corrupting onenand.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QtBl
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.4/onenand-corruption' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Pull "urgent onenand file system corruption fix for n900" from Tony Lindgren:
Last minute urgent pull request to prevent file system corruption
on Nokia N900.
Looks like we have a GPMC bus timing bug that has gone unnoticed
because of bootloader configured registers until few days ago. We
are not detecting the onenand clock rate properly unless we have
CONFIG_OMAP_GPMC_DEBUG set and this causes onenand corruption
that can be easily be reproduced.
There seems to be also an additional bug still lurking around for
onenand corruption. But that is still being investigated and
it does not seem to be GPMC timings related.
Meanwhile, it would be good to get this fix into v4.4 to prevent
wrong timings from corrupting onenand.
* tag 'omap-for-v4.4/onenand-corruption' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix onenand rate detection to avoid filesystem corruption
The Broadcom STB SATA host controller does not support device
initiated power management. Disable support for this feature
so the driver never sends SETFEATURES commands to the device
to enable/disable DIPM.
Signed-off-by: Danesh Petigara <dpetigara@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Enable support for ALPM in the host controller's capabilities
register. Also adjust the PLL timeout to give it enough time
to lock when the port exits slumber mode.
tj: minor style updates
Signed-off-by: Danesh Petigara <dpetigara@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently perf report only shows a help message "For a higher level
overview, try: perf report --sort comm,dso" unconditionally (even if
the sort keys were used). Add more help tips and show randomly.
Load tips from ${prefix}/share/doc/perf-tip/tips.txt file.
$ perf report | tail
0.10% swapper [kernel.vmlinux] [k] irq_exit
0.09% swapper [kernel.vmlinux] [k] flush_smp_call_function_queue
0.08% swapper [kernel.vmlinux] [k] native_write_msr_safe
0.03% swapper [kernel.vmlinux] [k] group_sched_in
0.01% perf [kernel.vmlinux] [k] native_write_msr_safe
#
# (Tip: Search options using a keyword: perf report -h <keyword>)
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452166913-27046-1-git-send-email-namhyung@kernel.org
[ Renamed it to perf_tip() and the parameter dirname to dirpath to fix the build on older distros ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This reverts commit d380561113.
If we end up splitting on the first segment, we don't adjust
the sector count. That results in hitting a BUG() with attempting
to split 0 sectors.
As this is just a performance issue and not a regression since
4.3 release, let's just rever this change. That gives us more
time to test a real fix for 4.5, which would be marked for
stable anyway.
These are necessary for multi threaded sample processing:
- hists__get__get_rotate_entries_in()
- hists__collapse_insert_entry()
- __hists__init()
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-14-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using perf_hpp__register_sort_field interface instead of directly adding
the entry.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-13-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We currently set 'overhead' and 'overhead_children' as default sort keys
within perf_hpp__init function by directly adding into the sort list.
This patch adds 'overhead' and 'overhead_children' in text form into
sort_keys and let them be added by standard sort dimension interface.
We need to eliminate dirrect sort_list additions to be able to add
support for hists specific sort keys.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mark the dra7xx PCI host driver as broken. This driver was first merged in
v3.17 and has never worked. Although the driver compiles just fine, it is
missing an essential device reset. If the driver is included, the kernel
locks up hard shortly after booting, before any console output appears.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Besides lockdep we use all the 'tools/lib' code in perf, so include it
completely in tags.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
