The Allwinner A80 SoC has 2 documented TCONs. The display pipeline
diagram from the user manual shows a third TCON, but it's missing
an interrupt line, and its registers are not explained either.
It's also not used in Allwinner's vendor BSP.
The first TCON only has channel 0, for LCD panel output. The TCON
hardware setup is peculiar in that the eDP reset must also be
deasserted to allow access to the TCON. How the eDP module is wired
in the SoC itself is never explained.
The second TCON only has channel 1, and its output is connected to
the HDMI encoder block.
This patch adds a "needs_edp_reset" field to the tcon quirks structure,
and adds quirks and compatible strings for the 2 documented TCONs.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180315114136.24747-4-wens@csie.org
Handle both positive and negative dclk polarity,
according to bus_flags, taking care of this:
On A20 and similar SoCs, the only way to achieve Positive Edge
(Rising Edge), is setting dclk clock phase to 2/3(240°).
By default TCON works in Negative Edge(Falling Edge), this is why phase
is set to 0 in that case.
Unfortunately there's no way to logically invert dclk through IO_POL
register.
The only acceptable way to work, triple checked with scope,
is using clock phase set to 0° for Negative Edge and set to 240° for
Positive Edge.
On A33 and similar SoCs there would be a 90° phase option, but it divides
also dclk by 2.
This patch is a way to avoid quirks all around TCON and DOTCLOCK drivers
for using A33 90° phase divided by 2 and consequently increase code
complexity.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1520963677-124239-1-git-send-email-giulio.benetti@micronovasrl.com
mode_valid function must be connected to encoder.
Otherwise it could get not be called by drm in the case there's a
bridge connected to encoder instead of a panel.
Move mode_valid function pointer to encoder helper functions,
changing its prototype according to encoder helper function pointer.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1520941017-81177-1-git-send-email-giulio.benetti@micronovasrl.com
Commit 070badfab7 ("drm/sun4i: call drm_vblank_init with correct number
of crtcs") has moved some code without updating the error handling gotos
accordingly.
Branch to the correct label and remove a now unused lablel.
Fixes: 070badfab7 ("drm/sun4i: call drm_vblank_init with correct number of crtcs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180311231909.5381-1-christophe.jaillet@wanadoo.fr
Currently the exclusivity is enabled when the rate is set by
the mode setting functions. These functions are called by
mode_set_nofb callback of drm_crc_helper. Then exclusivity
is disabled when tcon is disabled by atomic_disable
callback.
What happens is that mode_set_nofb can be called once when
mode changes, and afterwards the system can call atomic_enable
and atomic_disable multiple times without further calls to
mode_set_nofb.
This happens:
mode_set_nofb - clk exclusivity is enabled
atomic_enable
atomic_disable - clk exclusivity is disabled
atomic_enable
atomic_disable - clk exclusivity is already disabled, leading to WARN
in clk_rate_exclusive_put
Solution is to enable exclusivity in sun4i_tcon_channel_set_status.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180310110511.14697-1-megous@megous.com
Make sure that the CRTC code will call the enable/disable_vblank hooks.
Otherwise, since the refcounting will be off, we might end up in a
situation where the vblank management functions are called while the CRTC
is off.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-3-maxime.ripard@bootlin.com
In the case where mode_valid callback of our RGB connector was called
before mode_set was being called, the range of dividers would not be set,
resulting in a division by zero later on in the clk_round_rate logic.
Set the range of dividers before calling clk_round_rate to fix this.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-2-maxime.ripard@bootlin.com
The current logic to deal with old DT missing the LVDS properties doesn't
take into account whether the LVDS output is supported in the first place,
resulting in spurious error messages on SoCs where it doesn't even matter.
Introduce a new TCON flag to list if LVDS is supported at all to prevent
this from happening.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-1-maxime.ripard@bootlin.com
While A83T HDMI PHY seems to be just customized Synopsys HDMI PHY, H3
HDMI PHY is completely custom PHY.
However, they still have many things in common like clock and reset
setup, setting sync polarity and more.
Add support for H3 HDMI PHY variant.
While documentation exists for this PHY variant, it doesn't go in great
details. Because of that, almost all settings are copied from BSP linux
4.4. Interestingly, those settings are slightly different to those found
in a older BSP with Linux 3.4. For now, no user visible difference was
found between them.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-13-jernej.skrabec@siol.net
There are multiple variants of DW HDMI PHYs in Allwinner SoCs. While
some things like clock and reset setup are the same, PHY configuration
differs a lot.
Split out code which is PHY specific to separate functions and create
a structure which holds pointers to those functions.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-11-jernej.skrabec@siol.net
Current polarity configuration code is cleary wrong since it compares
same flag two times. However, even if flag name is fixed, it won't work
well for resolutions which have one polarity positive and another
negative.
Fix that by properly set each bit according to each polarity. Since
those two bits are not described in any documentation, relationships
were obtained by experimentation.
Fixes: b7c7436a5f ("drm/sun4i: Implement A83T HDMI driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-10-jernej.skrabec@siol.net
Currently exclusive TCON clock lock is never released, which, for
example, prevents changing resolution on HDMI.
In order to fix that, release clock when disabling TCON. TCON is always
disabled first before new mode is set.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-7-jernej.skrabec@siol.net
I noticed that with 4.16-rc1 LVDS output on A83T based TBS A711 tablet doesn't
work (there's output but it's garbled). I compared some older patches for LVDS
support with the mainlined ones and this change is missing from mainline Linux.
I don't know what the register does exactly and the harcoded register value
doesn't inspire much confidence that it will work in a general case, so I'm
sending this RFC.
This patch fixes the issue on A83T.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222161217.23904-1-megous@megous.com
Since we now have a way to enforce the zpos, check for the number of alpha
planes, the only missing part is to assign our pipe automatically instead
of hardcoding it.
The algorithm is quite simple, but requires two iterations over the list of
planes.
In the first one (which is the same one that we've had to check for alpha,
the frontend usage, and so on), we order the planes by their zpos.
We can then do a second iteration over that array by ascending zpos
starting with the pipe 0. When and if we encounter our alpha plane, we put
it and all the other subsequent planes in the second pipe.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e9caf21d831438d36a3ccc7cef229c9a7ea7f69f.1518802627.git-series.maxime.ripard@bootlin.com
A83T has DW HDMI IP block with a custom PHY similar to Synopsys gen2
HDMI PHY.
Only video output was tested, while HW also supports audio and CEC.
Support for them will be added later.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-11-jernej.skrabec@siol.net
Some TCONs on newer SoCs doesn't support channel 0, since they are meant
to be used only with TV or HDMI encoder.
Prepare support for them with adding has_channel_0 quirk.
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-8-jernej.skrabec@siol.net
UAPI Changes:
- drm/vc4: Expose performance counters to userspace (Boris)
Cross-subsystem Changes:
- MAINTAINERS: Linus to maintain panel-arm-versatile in -misc (Linus)
Core Changes:
- Only use swiotlb when necessary (Chunming)
Driver Changes:
- drm/panel: Add support for ARM Versatile panels (Linus)
- pl111: Improvements around versatile panel support (Linus)
----------------------------------------
Tagged on 2018-02-06:
drm-misc-next for 4.17:
UAPI Changes:
- Validate mode flags + type (Ville)
- Deprecate unused mode flags PIXMUX, BCAST (Ville)
- Deprecate unused mode types BUILTIN, CRTC_C, CLOCK_C, DEFAULT (Ville)
Cross-subsystem Changes:
- MAINTAINERS: s/Daniel/Maarten/ for drm-misc (Daniel)
Core Changes:
- gem: Export gem functions for drivers to use (Samuel)
- bridge: Introduce bridge timings in drm_bridge (Linus)
- dma-buf: Allow exclusive fence to be bundled in fence array when
calling reservation_object_get_fences_rcu (Christian)
- dp: Add training pattern 4 and HBR3 support to dp helpers (Manasi)
- fourcc: Add alpha bit to formats to avoid driver format LUTs (Maxime)
- mode: Various cleanups + add new device-wide .mode_valid hook (Ville)
- atomic: Fix state leak when non-blocking commits fail (Leo)
NOTE: IIRC, this was cross-picked to -fixes so it might fall out
- crc: Allow polling on the data fd (Maarten)
Driver Changes:
- bridge/vga-dac: Add THS8134* support (Linus)
- tinydrm: Various MIPI DBI improvements/cleanups (Noralf)
- bridge/dw-mipi-dsi: Cleanups + use create_packet helper (Brian)
- drm/sun4i: Add Display Engine frontend support (Maxime)
- drm/sun4i: Add zpos support + increase num planes from 2 to 4 (Maxime)
- various: Use drm_mode_get_hv_timing() to fill plane clip rectangle (Ville)
- stm: Add 8-bit clut support, add dsi phy v1.31 support, +fixes (Phillipe)
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Samuel Li <Samuel.Li@amd.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlqDUjcACgkQlvcN/ahK
Bwp83Af8D805yWeS/rJ9pLaiaWmfuymMtZVl/IOEssElxFO4d+ya/S4HrcWJQwX6
KinIQiaytKKe3+TXhVRVVwg7nLBFXzaPey6SvFPCgSEa+Bm+b3v0Uk1ll59UfOzs
/IhwIYIvUSCqTVAccpoT8X/85JUQ3iP41RbdfbBwUtpvL+XLl/y29Pw1dtV71ZCH
I3/5zAk3odLd9LuPkyhtg+V1e8pluKlPVGZ0ElOiZ7HlKzc3ekOLNNj563LBHq8y
b2txi2+h/bfBx7PU5JfP6aOKGGameE79/3UExwW0dJJAHqU728KKs/7OaDu7w0vr
UlH0cY/Zc461ejPldXXx8hoKIxJ3bw==
=5EUv
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.17:
UAPI Changes:
- drm/vc4: Expose performance counters to userspace (Boris)
Cross-subsystem Changes:
- MAINTAINERS: Linus to maintain panel-arm-versatile in -misc (Linus)
Core Changes:
- Only use swiotlb when necessary (Chunming)
Driver Changes:
- drm/panel: Add support for ARM Versatile panels (Linus)
- pl111: Improvements around versatile panel support (Linus)
----------------------------------------
Tagged on 2018-02-06:
drm-misc-next for 4.17:
UAPI Changes:
- Validate mode flags + type (Ville)
- Deprecate unused mode flags PIXMUX, BCAST (Ville)
- Deprecate unused mode types BUILTIN, CRTC_C, CLOCK_C, DEFAULT (Ville)
Cross-subsystem Changes:
- MAINTAINERS: s/Daniel/Maarten/ for drm-misc (Daniel)
Core Changes:
- gem: Export gem functions for drivers to use (Samuel)
- bridge: Introduce bridge timings in drm_bridge (Linus)
- dma-buf: Allow exclusive fence to be bundled in fence array when
calling reservation_object_get_fences_rcu (Christian)
- dp: Add training pattern 4 and HBR3 support to dp helpers (Manasi)
- fourcc: Add alpha bit to formats to avoid driver format LUTs (Maxime)
- mode: Various cleanups + add new device-wide .mode_valid hook (Ville)
- atomic: Fix state leak when non-blocking commits fail (Leo)
NOTE: IIRC, this was cross-picked to -fixes so it might fall out
- crc: Allow polling on the data fd (Maarten)
Driver Changes:
- bridge/vga-dac: Add THS8134* support (Linus)
- tinydrm: Various MIPI DBI improvements/cleanups (Noralf)
- bridge/dw-mipi-dsi: Cleanups + use create_packet helper (Brian)
- drm/sun4i: Add Display Engine frontend support (Maxime)
- drm/sun4i: Add zpos support + increase num planes from 2 to 4 (Maxime)
- various: Use drm_mode_get_hv_timing() to fill plane clip rectangle (Ville)
- stm: Add 8-bit clut support, add dsi phy v1.31 support, +fixes (Phillipe)
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Samuel Li <Samuel.Li@amd.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
* tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (115 commits)
drm/radeon: only enable swiotlb path when need v2
drm/amdgpu: only enable swiotlb alloc when need v2
drm: add func to get max iomem address v2
drm/vc4: Expose performance counters to userspace
drm: Print the pid when debug logging an ioctl error.
drm/stm: ltdc: remove non-alpha color formats on layer 2 for older hw
drm/stm: ltdc: add non-alpha color formats
drm/bridge/synopsys: dsi: Add 1.31 version support
drm/bridge/synopsys: dsi: Add read feature
drm/pl111: Support multiple endpoints on the CLCD
drm/pl111: Support variants with broken VBLANK
drm/pl111: Support variants with broken clock divider
drm/pl111: Handle the Versatile RGB/BGR565 mode
drm/pl111: Properly detect the ARM PL110 variants
drm/panel: Add support for ARM Versatile panels
drm/panel: Device tree bindings for ARM Versatile panels
drm/bridge: Rename argument from crtc to bridge
drm/crc: Add support for polling on the data fd.
drm/sun4i: Use drm_mode_get_hv_timing() to populate plane clip rectangle
drm/rcar-du: Use drm_mode_get_hv_timing() to populate plane clip rectangle
...
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
Note that this replaces crtc_state->adjusted_mode usage with
crtc_state->mode. The latter is the correct choice since that's the
mode the user provided and it matches the plane crtc coordinates
the user also provided.
Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-2-ville.syrjala@linux.intel.com
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> #irc
-----BEGIN PGP SIGNATURE-----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=pLN1
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This seems to have been a comparatively quieter merge window, I assume
due to holidays etc. The "biggest" change is AMD header cleanups, which
merge/remove a bunch of them. The AMD gpu scheduler is now being made generic
with the etnaviv driver wanting to reuse the code, hopefully other drivers
can go in the same direction.
Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff
elsewhere.
Core:
- Add .last_close and .output_poll_changed helpers to reduce driver footprints
- Fix plane clipping
- Improved debug printing support
- Add panel orientation property
- Update edid derived properties at edid setting
- Reduction in fbdev driver footprint
- Move amdgpu scheduler into core for other drivers to use.
i915:
- Selftest and IGT improvements
- Fast boot prep work on IPS, pipe config
- HW workarounds for Cannonlake, Geminilake
- Cannonlake clock and HDMI2.0 fixes
- GPU cache invalidation and context switch improvements
- Display planes cleanup
- New PMU interface for perf queries
- New firmware support for KBL/SKL
- Geminilake HW workaround for perforamce
- Coffeelake stolen memory improvements
- GPU reset robustness work
- Cannonlake horizontal plane flipping
- GVT work
amdgpu/radeon:
- RV and Vega header file cleanups (lots of lines gone!)
- TTM operation context support
- 48-bit GPUVM support for Vega/RV
- ECC support for Vega
- Resizeable BAR support
- Multi-display sync support
- Enable swapout for reserved BOs during allocation
- S3 fixes on Raven
- GPU reset cleanup and fixes
- 2+1 level GPU page table
amdkfd:
- GFX7/8 SDMA user queues support
- Hardware scheduling for multiple processes
- dGPU prep work
rcar:
- Added R8A7743/5 support
- System suspend/resume support
sun4i:
- Multi-plane support for YUV formats
- A83T and LVDS support
msm:
- Devfreq support for GPU
tegra:
- Prep work for adding Tegra186 support
- Tegra186 HDMI support
- HDMI2.0 and zpos support by using generic helpers
tilcdc:
- Misc fixes
omapdrm:
- Support memory bandwidth limits
- DSI command mode panel cleanups
- DMM error handling
exynos:
- drop the old IPP subdriver.
etnaviv:
- Occlusion query fixes
- Job handling fixes
- Prep work for hooking in gpu scheduler
armada:
- Move closer to atomic modesetting
- Allow disabling primary plane if overlay is full screen
imx:
- Format modifier support
- Add tile prefetch to PRE
- Runtime PM support for PRG
ast:
- fix LUT loading"
* tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits)
drm/ast: Load lut in crtc_commit
drm: Check for lessee in DROP_MASTER ioctl
drm: fix gpu scheduler link order
drm/amd/display: Demote error print to debug print when ATOM impl missing
dma-buf: fix reservation_object_wait_timeout_rcu once more v2
drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
drm/amd/amdgpu: Add Polaris version check
drm/amdgpu: Reenable manual GPU reset from sysfs
drm/amdgpu: disable MMHUB power gating on raven
drm/ttm: Don't unreserve swapped BOs that were previously reserved
drm/ttm: Don't add swapped BOs to swap-LRU list
drm/amdgpu: only check for ECC on Vega10
drm/amd/powerplay: Fix smu_table_entry.handle type
drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count
drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
drm/radeon: fill in rb backend map on evergreen/ni.
drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)
drm/ttm: only free pages rather than update global memory count together
drm/amdgpu: fix CPU based VM updates
drm/amdgpu: fix typo in amdgpu_vce_validate_bo
...
Fixes one Kconfig issue and a enable some panels to work properly.
There is also a fix of error code return in sun4i.
-----BEGIN PGP SIGNATURE-----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=NLL4
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Fixes for 4.16:
Fixes one Kconfig issue and a enable some panels to work properly.
There is also a fix of error code return in sun4i.
* tag 'drm-misc-next-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-misc:
drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
drm/panel: lvds: Handle the optional regulator case properly
drm/sun4i: Fix error code in sun4i_tcon_bind()
Fixes the following build warnings:
In file included from ../drivers/gpu/drm/sun4i/sun8i_mixer.h:18:0,
from ../drivers/gpu/drm/sun4i/sun8i_vi_scaler.h:13,
from ../drivers/gpu/drm/sun4i/sun8i_vi_scaler.c:12:
../drivers/gpu/drm/sun4i/sunxi_engine.h:36:16: warning: ‘struct drm_crtc_state’ declared inside parameter list will not be visible outside of this definition or declaration
struct drm_crtc_state *old_state);
^~~~~~~~~~~~~~
../drivers/gpu/drm/sun4i/sunxi_engine.h:53:15: warning: ‘struct drm_crtc_state’ declared inside parameter list will not be visible outside of this definition or declaration
struct drm_crtc_state *state);
^~~~~~~~~~~~~~
In file included from ../drivers/gpu/drm/sun4i/sun8i_mixer.h:18:0,
from ../drivers/gpu/drm/sun4i/sun8i_ui_scaler.h:12,
from ../drivers/gpu/drm/sun4i/sun8i_ui_scaler.c:12:
../drivers/gpu/drm/sun4i/sunxi_engine.h:36:16: warning: ‘struct drm_crtc_state’ declared inside parameter list will not be visible outside of this definition or declaration
struct drm_crtc_state *old_state);
^~~~~~~~~~~~~~
../drivers/gpu/drm/sun4i/sunxi_engine.h:53:15: warning: ‘struct drm_crtc_state’ declared inside parameter list will not be visible outside of this definition or declaration
struct drm_crtc_state *state);
^~~~~~~~~~~~~~
Fixes: 6b8562c86e ("drm/sun4i: engine: Create an atomic_begin
callback")
Fixes: 656e5f6549 ("drm/sun4i: engine: Add a custom crtc
atomic_check")
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180122174306.231609-1-seanpaul@chromium.org
If we try to read the backend registers while it fetches the new values, we
end up with the value of some random register instead of the one we asked
for.
In order to prevent that, let's make sure that the very first thing we do
during our atomic modesetting is to let the commit bit come to a rest.
We don't have to worry about anything else since the only time we will
trigger a new transaction is during the atomic_commit which comes much
later.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/35604307e5bde2b85c674de79fa7c4d55700f085.1516613040.git-series.maxime.ripard@free-electrons.com
Now that we have everything in place, we can start enabling the frontend.
This is more difficult than one would assume since there can only be one
plane using the frontend per-backend.
We therefore need to make sure that the userspace will not try to setup
multiple planes using it, since that would be impossible. In order to
prevent that, we can create an atomic_check callback that will check that
only one plane will effectively make use of the frontend in a given
configuration, and will toggle the switch in that plane state so that the
proper setup function can do their role.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/278e6c514a8311750fe627c7f28d58b3e2cbd825.1516613040.git-series.maxime.ripard@free-electrons.com
Now that we have a driver, we can make use of it. This is done by
adding a flag to our custom plane state that will trigger whether we should
use the frontend on that particular plane or not.
The rest is just plumbing to set up the backend to not perform the DMA but
receive its data from the frontend.
Note that we're still not making any use of the frontend itself, as no one
is setting the flag yet.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cdffc25eab2d817820cc78cbd24f1f4b99902014.1516613040.git-series.maxime.ripard@free-electrons.com
We have some restrictions on what the planes and CRTC can provide that are
tied to only one generation of display engines.
For example, on the first generation, we can only have one YUV plane or one
plane that uses the frontend output.
Let's allow our engines to provide an atomic_check callback to validate the
current configuration.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e5f5f144e5c20d348cdb29933ae876c105bec017.1516613040.git-series.maxime.ripard@free-electrons.com
The function converting the DRM format to its equivalent in the backend
registers was assuming that we were having a plane.
However, we might want to use that function when setting up a plane using
the frontend, in which case we will not have a plane associated to the
backend's layer. Yet, we still need to setup the format to the one output
by the frontend.
Test for NULL plane pointers before referencing them, so that we can work
around it.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bfbe4c2e8525a7542526b648d59a8f3546e905f1.1516613040.git-series.maxime.ripard@free-electrons.com
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaW+iVAAoJEHm+PkMAQRiGCDsIAJALNpX7odTx/8y+yCSWbpBH
E57iwr4rmnI6tXJY6gqBUWTYnjAcf4b8IsHGCO6q3WIE3l/kt+m3eA21a32mF2Db
/bfPGTOWu5LoOnFqzgH2kiFuC3Y474toxpld2YtkQWYxi5W7SUtIHi/jGgkUprth
g15yPfwYgotJd/gpmPfBDMPlYDYvLlnPYbTG6ZWdMbg39m2RF2m0BdQ6aBFLHvbJ
IN0tjCM6hrLFBP0+6Zn60pevUW9/AFYotZn2ankNTk5QVCQm14rgQIP+Pfoa5WpE
I25r0DbkG2jKJCq+tlgIJjxHKD37GEDMc4T8/5Y8CNNeT9Q8si9EWvznjaAPazw=
=o5gx
-----END PGP SIGNATURE-----
BackMerge tag 'v4.15-rc8' into drm-next
Linux 4.15-rc8
Daniel requested this for so the intel CI won't fall over on drm-next
so often.
It was only checking the divider when determing the closest match if
it could not match the requested rate exactly.
For a projector connected to an Olimex A20-OLinuXino-LIME using HDMI
with a native resolution of 1280x800 and pixel clock of 83.5 MHz, this
resulted in 1280x800 mode not being available and the following in dmesg
when the kernel is booted with drm.debug=0x3e:
[drm:drm_mode_debug_printmodeline] Modeline 37:"1280x800" 60 83500 1280 1352 1480 1680 800 810 816 831 0x48 0x5
[drm:drm_mode_prune_invalid] Not using 1280x800 mode: NOCLOCK
Fixes: 9c5681011a ("drm/sun4i: Add HDMI support")
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109020323.11852-4-net147@gmail.com
It is possible that if there is no exact rate match and
"rounded = clk_hw_round_rate(parent, ideal)" gives high enough values
(e.g. if rounded is 2 * ideal) that the condition
"abs(rate - rounded / i) < abs(rate - best_parent / best_div)" is never
met and best_parent is never set. This results in req->rate and
req->best_parent_rate being assigned 0.
To avoid this, we set best_parent to the first calculated rate if it is
unset. The sun4i_tmds_calc_divider function already has a similar check.
Fixes: 9c5681011a ("drm/sun4i: Add HDMI support")
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109020323.11852-2-net147@gmail.com
When attached to the connector, the mode_valid callback will only filter
the modes provided by the connector itself as part of its probe.
However, it will not be doing it when the mode is provided by the
userspace, which still might result in a broken configuration.
In order to enforce these constraints, move our mode_valid callback to the
encoder which doesn't have this behaviour.
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[maxime: Wrote the commit log in order to update the patch from the merged
v3 to the v4 that was correct.]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0fa230a8-d01d-561a-f74f-6b4fd421255b@xs4all.nl
The commit 4c7f16d14a ("drm/sun4i: Fix TCON clock and regmap
initialization sequence") moved a bunch of logic around, but forgot to
update the gotos after the introduction of the err_free_dotclock label.
It means that if we fail later that the one introduced in that commit,
we'll just to the old label which isn't free the clock we created. This
will result in a breakage as soon as someone tries to do something with
that clock, since its resources will have been long reclaimed.
Cc: <stable@vger.kernel.org>
Fixes: 4c7f16d14a ("drm/sun4i: Fix TCON clock and regmap initialization sequence")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f83c1cebc731f0b4251f5ddd7b38c718cd79bb0b.1512662253.git-series.maxime.ripard@free-electrons.com
When I connected my cubieboard running 4.15-rc1 to my 4k display I got no
picture. Some digging found that there is no check against the upper
pixelclock limit of the HDMI output, so X selects a 4kp60 format at 594
MHz, which obviously won't work.
The patch below adds a check for the upper bound of what this hardware can
do, and it checks if the requested tmds clock can be obtained.
It also allows for the +/- 0.5% pixel clock variation that the HDMI spec permits.
That code is based on commit 22d0be2a55 ("drm: arcpgu: Allow some clock
deviation in crtc->mode_valid() callback") from Jose Abreu for drm/arc.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Thanks-to: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/162854cb-c7bd-d9ce-9fa0-9a6cd89c621b@xs4all.nl
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-15-noralf@tronnes.org
Basic principle of operation when using YUV framebuffer is that chroma
planes have to be upscaled to same size as luma.
Because of that, expand DE2 scaler library to support that.
BSP driver uses another set of FIR filter coefficients for YUV planes.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-26-jernej.skrabec@siol.net
DE2 have many CSC units - channel input CSC, channel output CSC and
mixer output CSC and maybe more.
Fortunately, they have all same register layout, only base offsets
differs.
Add support only for channel output CSC for now.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-24-jernej.skrabec@siol.net
Base addresses of channel output CSC (CCSC) depends whether mixer in
question is first or second and if it is second, if supports VEP or not.
This new property will tell which set of base addresses to take.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-23-jernej.skrabec@siol.net
No all SoCs support scaling on all channels. For example, V3s support
scaling only on VI channels. Because of that, add additional
configuration bitmask which tells which channel support scaler.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-21-jernej.skrabec@siol.net
This commit adds basic support for VI planes. They are meant for video
overlay and because of that they support YUV formats too. However, using
YUV format is not straightforward, so only RGB formats are supported for
now.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-20-jernej.skrabec@siol.net
Till now, DE2 driver supported only UI planes. Before we add support for
VI planes, lets split out UI layer specific code from common parts. This
commit does the following:
- renames sun8i_layer.c to sun8i_ui_layer.c
- moves UI channel specific code to sun8i_ui_layer.c
- moves common code from sun8i_layer.c to sun8i_mixer.c
- renames function and structure names so it is apparent where they
belong to
No functional change is made.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-19-jernej.skrabec@siol.net
There is no point having code which sets interlace mode of mixer in
channel related function. Interlace mode will only change when CRTC
state will change, so let's move it to the block which is executed only
when primary plane state is changed.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-16-jernej.skrabec@siol.net
Channel size should be set every time plane is changed, not only when
primary plane changes. Current code works only because only one
(primary) plane is supported at the moment.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-15-jernej.skrabec@siol.net
Line width is a property of a framebuffer and it belongs to
sun8i_mixer_update_layer_buffer(). This will became even more obvious
when support for multi-plane formats will be added.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-14-jernej.skrabec@siol.net
Now that we have properly clipped coordinates in plane state structure,
use them.
This also fixes bug where source x and y were adjusted for negative
value, but width and height weren't. It wasn't discovered because
primary plane usually doesn't have negative coordinates.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-13-jernej.skrabec@siol.net
Since current DE2 driver doesn't know how to scale yet, add atomic check
function which checks that.
Nice side effect of that function is that populates clipped coordinates
and checks visibility of the plane. That data will be used in the
future.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-12-jernej.skrabec@siol.net
Till now, plane selection was hardcoded to first overlay in first UI
channel and layer parameter is unused.
Rename and add parameters to layer functions so they would represent HW
more accurately and start using then.
It turns out that overlays don't fit well in current DRM design, because
they can't be blended together or scaled independetly when they are set
to same channel. Because of that, always use only first overlay in each
channel.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-11-jernej.skrabec@siol.net
If we want to support multiple planes in the future, code which enables
pipe has to be moved to appropriate place and it must depend on channel
id instead of being hardcoded.
Side effect of that rework is definition of default Z position. For now,
put first channel at the bottom, second above it and so on.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-10-jernej.skrabec@siol.net
Now that some knowledge of DE2 is gained, rename or add some macros to
make code more readable.
Max channel macro is removed, since it is not used and it is not clear
if it has right value. Structures in BSP driver shows possibility of 5
channels maximum although there is no SoC with such configuration.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-9-jernej.skrabec@siol.net
BSP driver always sets blend mode for all channels, no matter if they
are really used or not. Do the same here.
The exact meaning of the value is not exactly known, but BSP driver
mentions "SRC OVER" and by digging through code some more info can be
found.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-8-jernej.skrabec@siol.net
Premultiply and color key control registers are already set to zero by
initialization code few lines above. Furthermore, it seems that
colorkeying doesn't really work. It's not used in BSP driver and
experiments with it all failed.
Just remove the code.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-6-jernej.skrabec@siol.net
Current code sets alpha mode to global alpha mode and global alpha
value to 0xff which is totaly opaque. That is not needed for two
reasons:
- only one plane is active and thus it can be blended only with
background, which is black,
- it will hinder proper blending when more than one plane is supported
Default mode (0) considers pixel alpha value or 0xff if pixel has
no alpha information. Global alpha value is ignored in this case.
Because of that, just remove the code.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-4-jernej.skrabec@siol.net
We need to pull 66660d4cf2 (drm: add connector info/property for
non-desktop displays [v2]) into drm-misc-next to continue the development
of the display rotation series.
Effectively this also pulls 4.15-r2 into drm-misc-next.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
The sun4i DRM driver maintains a list of compatible strings it uses to
check if a device node within the display component graph is a TCON.
The TCON driver also has this list, used to bind the TCON driver to
the device. These two lists are identical.
Instead of maintaining two identical lists, export the list from the
TCON driver for the DRM driver to use.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171127084632.25511-1-wens@csie.org
-----BEGIN PGP SIGNATURE-----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=xVV2
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main drm pull request for v4.15.
Core:
- Atomic object lifetime fixes
- Atomic iterator improvements
- Sparse/smatch fixes
- Legacy kms ioctls to be interruptible
- EDID override improvements
- fb/gem helper cleanups
- Simple outreachy patches
- Documentation improvements
- Fix dma-buf rcu races
- DRM mode object leasing for improving VR use cases.
- vgaarb improvements for non-x86 platforms.
New driver:
- tve200: Faraday Technology TVE200 block.
This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in
the StorLink SL3516 (later Cortina Systems CS3516) as well as the
Grain Media GM8180.
New bridges:
- SiI9234 support
New panels:
- S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba
LT089AC19000, Innolux AT043TN24
i915:
- Remove Coffeelake from alpha support
- Cannonlake workarounds
- Infoframe refactoring for DisplayPort
- VBT updates
- DisplayPort vswing/emph/buffer translation refactoring
- CCS fixes
- Restore GPU clock boost on missed vblanks
- Scatter list updates for userptr allocations
- Gen9+ transition watermarks
- Display IPC (Isochronous Priority Control)
- Private PAT management
- GVT: improved error handling and pci config sanitizing
- Execlist refactoring
- Transparent Huge Page support
- User defined priorities support
- HuC/GuC firmware refactoring
- DP MST fixes
- eDP power sequencing fixes
- Use RCU instead of stop_machine
- PSR state tracking support
- Eviction fixes
- BDW DP aux channel timeout fixes
- LSPCON fixes
- Cannonlake PLL fixes
amdgpu:
- Per VM BO support
- Powerplay cleanups
- CI powerplay support
- PASID mgr for kfd
- SR-IOV fixes
- initial GPU reset for vega10
- Prime mmap support
- TTM updates
- Clock query interface for Raven
- Fence to handle ioctl
- UVD encode ring support on Polaris
- Transparent huge page DMA support
- Compute LRU pipe tweaks
- BO flag to allow buffers to opt out of implicit sync
- CTX priority setting API
- VRAM lost infrastructure plumbing
qxl:
- fix flicker since atomic rework
amdkfd:
- Further improvements from internal AMD tree
- Usermode events
- Drop radeon support
nouveau:
- Pascal temperature sensor support
- Improved BAR2 handling
- MMU rework to support Pascal MMU
exynos:
- Improved HDMI/mixer support
- HDMI audio interface support
tegra:
- Prep work for tegra186
- Cleanup/fixes
msm:
- Preemption support for a5xx
- Display fixes for 8x96 (snapdragon 820)
- Async cursor plane fixes
- FW loading rework
- GPU debugging improvements
vc4:
- Prep for DSI panels
- fix T-format tiling scanout
- New madvise ioctl
Rockchip:
- LVDS support
omapdrm:
- omap4 HDMI CEC support
etnaviv:
- GPU performance counters groundwork
sun4i:
- refactor driver load + TCON backend
- HDMI improvements
- A31 support
- Misc fixes
udl:
- Probe/EDID read fixes.
tilcdc:
- Misc fixes.
pl111:
- Support more variants
adv7511:
- Improve EDID handling.
- HDMI CEC support
sii8620:
- Add remote control support"
* tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits)
drm/rockchip: analogix_dp: Use mutex rather than spinlock
drm/mode_object: fix documentation for object lookups.
drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU
drm/i915: Move init_clock_gating() back to where it was
drm/i915: Prune the reservation shared fence array
drm/i915: Idle the GPU before shinking everything
drm/i915: Lock llist_del_first() vs llist_del_all()
drm/i915: Calculate ironlake intermediate watermarks correctly, v2.
drm/i915: Disable lazy PPGTT page table optimization for vGPU
drm/i915/execlists: Remove the priority "optimisation"
drm/i915: Filter out spurious execlists context-switch interrupts
drm/amdgpu: use irq-safe lock for kiq->ring_lock
drm/amdgpu: bypass lru touch for KIQ ring submission
drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories()
drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs()
drm/amd/powerplay: initialize a variable before using it
drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels
drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition
drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug
drm/rockchip: add CONFIG_OF dependency for lvds
...
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The A20 display pipeline has 2 frontends, 2 backends, and 2 TCONs.
This patch adds support (or a compatible string in the frontend's
case) for these components.
The TCONs support directly outputting to CPU/RGB/LVDS LCD panels,
or it can output to HDMI via an on-chip HDMI controller, or
CVBS/YPbPr/VGA signals via on-chip TV encoders. These additional
encoders are not covered in this patch.
Signed-off-by: Jonathan Liu <net147@gmail.com>
[wens@csie.org: Expand commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-6-wens@csie.org
The A10 display pipeline has 2 frontends, 2 backends, and 2 TCONs.
This patch adds support (or a compatible string in the frontend's
case) for these components.
The TCONs support directly outputting to CPU/RGB/LVDS LCD panels,
or it can output to HDMI via an on-chip HDMI controller, or
CVBS/YPbPr/VGA signals via on-chip TV encoders. These additional
encoders are not covered in this patch.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-5-wens@csie.org
The HDMI controller in the A10 SoC is the same as the one currently
supported in the A10s. It has slightly different setup parameters.
Since these parameters are not thoroughly understood, we add support
for this variant by copying these parameters verbatim.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-4-wens@csie.org
The A10 has two TCONs that are similar to the ones found on other SoCs.
Like the A31, TCON0 has a register used to mux the TCON outputs to the
downstream encoders. The bit fields are slightly different.
Signed-off-by: Jonathan Liu <net147@gmail.com>
[wens@csie.org: Reworked for A10 and fixed up commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-3-wens@csie.org
The backend has a mux to select the destination of the data to output
to. It can select the TCON or the frontends. On the A20, it includes
an option to output to the second TCON. This is not documented in the
user manual, but the vendor kernel uses it nevertheless, so the second
backend outputs to the second TCON.
Although the muxing can be changed on the fly, DRM needs to be able to
group a bunch of layers such that they get switched to another crtc
together. This is because the display backend does the layer compositing,
while the TCON generates the display timings. This constraint is not
supported by DRM.
Here we simply pair up backends and TCONs with the same ID.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-2-wens@csie.org
Some channel0 setup has to be done, no matter what the output interface is
(RGB, CPU, LVDS). Move that code into a common function in order to avoid
duplication.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/183100/
So far, we've required all the TCON-connected encoders to call the TCON
enable and disable functions.
This was made this way because in the RGB/LVDS case, the TCON is the CRTC
and the encoder. However, in all the other cases (HDMI, TV, DSI, etc.), we
have another encoder down the road that needs to be programmed.
We also needed to know which channel the encoder is connected to, which is
encoder-specific.
The CRTC's enable and disable callbacks can work just fine for our use
case, and we can get the channel to use just by looking at the type of
encoder, since that is fixed. Implement those callbacks, which will
remove some of the encoder boilerplate.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/90b4396e19b3eca61b2ebfdae0672074b88ad74d.1508231063.git-series.maxime.ripard@free-electrons.com
The commit da82b8785e ("drm/sun4i: add components in breadth first
traversal order") implemented a breadth first traversal of our device tree
nodes graph. However, it was relying on the kernel linked lists, and those
are not really safe for addition.
Indeed, in a single pipeline stage, your first stage (ie, the mixer or
fronted) will be queued, and it will be the final iteration of that list as
far as list_for_each_entry_safe is concerned. Then, during that final
iteration, we'll queue another element (the TCON or the backend) that
list_for_each_entry_safe will not account for, and we will leave the loop
without having iterated over all the elements. And since we won't have
built our components list properly, the DRM driver will be left
non-functional.
We can instead use a kfifo to queue and enqueue components in-order, as was
the original intention. This also has the benefit of removing any dynamic
allocation, making the error handling path simpler too. The only thing
we're losing is the ability to tell whether an element has already been
queued, but that was only needed to remove spurious logs, and therefore
purely cosmetic.
This means that this commit effectively reverses e8afb7b67f ("drm/sun4i:
don't add components that are already in the queue").
Fixes: da82b8785e ("drm/sun4i: add components in breadth first traversal order")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4ecb323e787918208f6a5d9f0ebba12c62583c98.1508231063.git-series.maxime.ripard@free-electrons.com
The display backend, as well as other peripherals that have a DRAM
clock gate and access DRAM directly, bypassing the system bus,
address the DRAM starting from 0x0, while physical addresses the
system uses starts from 0x40000000 (or 0x20000000 in A80's case).
This issue was witnessed on the Cubietruck, which has 2GB of RAM.
Devices with less RAM function normally due to the DRAM address
wrapping around. CMA seems to always allocate its buffer at a
very high address, close to the end of DRAM.
On a 1GB RAM device, the physical address would be something like
0x78000000. The DRAM address 0x78000000 would access the same DRAM
region as 0x38000000 on a system, as the DRAM address would only
span 0x0 ~ 0x3fffffff. The bit 0x40000000 is non-functional in this
case.
However on the Cubietruck, the DRAM is 2GB. The physical address
is 0x40000000 ~ 0xbfffffff. The buffer would be something like
0xb8000000. But the DRAM address span 0x0 ~ 0x7fffffff, meaning
the buffer address wraps around to 0x38000000, which is wrong.
The correct DRAM address for it should be 0x78000000.
Correct the address configured into the backend layer registers
by PHYS_OFFSET to account for this.
Fixes: 9026e0d122 ("drm: Add Allwinner A10 Display Engine support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017042349.31743-6-wens@csie.org
Initially we configured the PAD_CTRL1 register at probe/bind time.
However it seems the HDMI controller will modify some of the bits
in this register by itself. On the A10 it is particularly annoying
as it toggles the output invert bits, which inverts the colors on
the display output.
The U-boot driver this driver is based on sets this register twice,
though it seems it's only needed for actual display output. Hence
we move it to the mode_set function.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-8-wens@csie.org
While debugging inverted color from the HDMI output on the A10, I
found that the lowest 3 bits were set. These were cleared on A20
boards that had normal display output. By manually toggling these
bits the mapping of the color components to these bits was found.
While these are not used anywhere, it would be nice to document
them somewhere.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-7-wens@csie.org
Many of the backend's layer configuration registers have undefined
default values. This poses a risk as we use regmap_update_bits in
some places, and don't overwrite the whole register.
At probe/bind time we explicitly clear all the control registers
by writing 0 to them. This patch adds a more detailed explanation
on why we're doing this.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-5-wens@csie.org
Commit 4636ce93d5 ("drm/fb-cma-helper: Add drm_fb_cma_get_gem_addr()")
adds a new helper, which covers fetching a drm_framebuffer's GEM object
and calculating the buffer address for a given plane.
This patch uses this helper to replace our own open coded version of the
same function.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-4-wens@csie.org
The backend has various clocks and reset controls that need to be
enabled and deasserted before register access is possible.
Move the creation of the regmap to after the clocks and reset controls
have been configured where it makes more sense.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-3-wens@csie.org
Even though the components framework can handle duplicate entries,
the extra entries cause a lot more debug messages to be generated,
which would be confusing to developers not familiar with our driver
and the framework in general.
Instead, we can scan the relatively small queue and check if the
component to be added is already queued up. Since the display
pipelines are symmetrical (not considering the third display
pipeline on the A80), and we add components level by level, when
we get to the second instance at the same level, any shared downstream
components would already be in the queue.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-2-wens@csie.org
The HDMI controller found in the A31 SoCs is slightly different
from the one already supported, which is found in the A10s:
- Need different initial values for the PLL related registers
- Different behavior of the DDC and TMDS clocks
- Different register layout for the DDC portion
- Separate DDC parent clock
This patch adds support for it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-10-wens@csie.org
The DDC block for the HDMI controller is different on the A31.
This patch adds the register definitions.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-9-wens@csie.org
The HDMI controller found in earlier Allwinner SoCs have slight
differences between the A10, A10s, and the A31:
- Need different initial values for the PLL related registers
- Different behavior of the DDC and TMDS clocks
- Different register layout for the DDC portion
- Separate DDC parent clock on the A31
- Explicit reset control
For the A31, the HDMI TMDS clock has a different value offset for
the divider. The HDMI DDC block is different from the one in the
other SoCs. As far as the DDC clock goes, it has no pre-divider,
as it is clocked from a slower parent clock, not the TMDS clock.
The divider offset from the register value is different. And the
clock control register is at a different offset.
A new variant data structure is created to store pointers to the
above functions, structures, and the different initial values.
Another flag notates whether there is a separate DDC parent clock.
If not, the TMDS clock is passed to the DDC clock create function,
as before.
Regmap fields are used to deal with the different register layout
of the DDC block.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-8-wens@csie.org
On SoCs with two display pipelines, it is possible that the two
pipelines are active at the same time, with potentially incompatible
dot clocks.
Let the HDMI encoder's TMDS clock go through all of its parents when
calculating possible clock rates. This allows usage of the second video
PLL as its parent.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-6-wens@csie.org
The HDMI driver is written with readl/writel I/O to the registers.
However, to support the A31 variant, which has a different layout
for the DDC registers, it was recommended to use regfields to have
a cleaner implementation. To use regfields, we need to create an
underlying regmap.
This patch only adds the regmap. It does not convert the existing
driver accesses to use regmap.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-5-wens@csie.org
The HDMI driver enables the bus and mod clocks in the bind function, but
does not disable them if it then bails our due to any errors. Neither
does it disable the clocks in the unbind function.
Fix this by adding a proper error path to the bind function, and
clk_disable_unprepare calls to the unbind function.
Also rename the err_cleanup_connector label to err_cleanup_encoder,
since it is the encoder that gets cleaned up.
Fixes: 9c5681011a ("drm/sun4i: Add HDMI support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-4-wens@csie.org
On systems with 2 TCONs such as the A31, it is possible to demux the
output of the TCONs to one encoder.
Add support for this for the A31.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-3-wens@csie.org
Different SoCs have different muxing options and values for the TCON
outputs. Instead of stuffing every possibility in sun4i_tcon_set_mux(),
add a callback pointer to sun4i_tcon_quirks that each TCON variant
can use to provide muxing support.
The current muxing options in sun4i_tcon_set_mux() for sun5i-a13 are
moved to a new sun5i-specific callback function.
Since the new callback replaces what the .has_unknown_mux field in
tcon quirks did in the past, the field is removed.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-2-wens@csie.org
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZ0WQ6AAoJEHm+PkMAQRiGuloH/3sF4qfBhPuJo8OTf0uCtQ18
4Ux9zZbm81df/Jjz0exAp1Jqk+TvdIS3OXPWcKilvbUBP16hQcsxFTnI/5QF+YcN
87aNr+OCMJzOBK4suN1yhzO46NYHeIizdB0PTZVL1Zsto69Tt31D8VJmgH6oBxAw
Isb/nAkOr31dZ9PI5UEExTIanUt6EywVb0UswA+2rNl3h1UkeasQCpMpK2n6HBhU
kVD7sxEd/CN0MmfhB0HrySSam/BeSpOtzoU9bemOwrU2uu9+5+2rqMe7Gsdj4nX6
3Kk+7FQNktlrhxCZIFN/+CdusOUuDd8r/75d7DnsRK5YvSb0sZzJkfD3Nba68Ms=
=7J2+
-----END PGP SIGNATURE-----
BackMerge tag 'v4.14-rc3' into drm-next
Linux 4.14-rc3
Requested by Daniel for the tracing build fix in fixes.
The HDMI driver enables the bus and mod clocks in the bind function, but
does not disable them if it then bails our due to any errors. Neither
does it disable the clocks in the unbind function.
Fix this by adding a proper error path to the bind function, and
clk_disable_unprepare calls to the unbind function.
Also rename the err_cleanup_connector label to err_cleanup_encoder,
since it is the encoder that gets cleaned up.
Fixes: 9c5681011a ("drm/sun4i: Add HDMI support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170929082306.16193-6-wens@csie.org
drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now,
so use the function directly.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-9-git-send-email-noralf@tronnes.org
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- DP SDP defines (Ville)
- polish for scdc helpers (Thierry Reding)
- fix lifetimes for connector/plane state across crtc changes (Maarten
Lankhorst).
- sparse fixes (Ville+Thierry)
- make legacy kms ioctls all interruptible (Maarten)
- push edid override into the edid helpers (out of probe helpers)
(Jani)
- DP ESI defines for link status (DK)
Driver Changes:
- drm-panel is now in drm-misc!
- minor panel-simple cleanups/refactoring by various folks
- drm_bridge_add cleanup (Inki Dae)
- constify a few i2c_device_id structs (Arvind Yadav)
- More patches from Noralf's fb/gem helper cleanup
- bridge/synopsis: reset fix (Philippe Cornu)
- fix tracepoint include handling in drivers (Thierry)
- rockchip: lvds support (Sandy Huang)
- move sun4i into drm-misc fold (Maxime Ripard)
- sun4i: refactor driver load + support TCON backend/layer muxing
(Chen-Yu Tsai)
- pl111: support more pl11x variants (Linus Walleij)
- bridge/adv7511: robustify probing/edid handling (Lars-Petersen
Clausen)
New hw support:
- S6E63J0X03 panel (Hoegeun Kwon)
- OTM8009A panel (Philippe CORNU)
- Seiko 43WVF1G panel (Marco Franchi)
- tve200 driver (Linus Walleij)
Plus assorted of tiny patches all over, including our first outreachy
patches from applicants for the winter round!
* tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc: (101 commits)
drm: add backwards compatibility support for drm_kms_helper.edid_firmware
drm: handle override and firmware EDID at drm_do_get_edid() level
drm/dp: DPCD register defines for link status within ESI field
drm/rockchip: Replace dev_* with DRM_DEV_*
drm/tinydrm: Drop driver registered message
drm/gem-fb-helper: Use debug message on gem lookup failure
drm/imx: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()
drm/bridge: adv7511: Constify HDMI CODEC platform data
drm/bridge: adv7511: Enable connector polling when no interrupt is specified
drm/bridge: adv7511: Remove private copy of the EDID
drm/bridge: adv7511: Properly update EDID when no EDID was found
drm/crtc: Convert setcrtc ioctl locking to interruptible.
drm/atomic: Convert pageflip ioctl locking to interruptible.
drm/legacy: Convert setplane ioctl locking to interruptible.
drm/legacy: Convert cursor ioctl locking to interruptible.
drm/atomic: Convert atomic ioctl locking to interruptible.
drm/atomic: Prepare drm_modeset_lock infrastructure for interruptible waiting, v2.
drm/tve200: Clean up panel bridging
drm/doc: Update todo.rst
drm/dp/mst: Sideband message transaction to power up/down nodes
...
Now that the cec-pin framework has been merged, we can remove the safeguard
that were preventing the CEC part of the sun4i HDMI driver and actually
start to use it.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
If we want to have vblank on both pipelines at the same time, we need
to call drm_vblank_init with num_crtcs = 2.
Instead, since the crtc init calls correctly set mode_config.num_crtc,
we can move the drm_vblank_init call to after the crtc init code is
called, which is the component bind part. Then we can just pass
mode_config.num_crtc in.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908075016.18657-8-wens@csie.org
The TCON has a mux to select the source of the data to display.
This mux includes selecting the display backends. On the A31,
which has two display pipelines, this mux can let the TCON
select either backend as its data source. Although the muxing
can be changed on the fly, DRM needs to be able to group a
bunch of layers such that they get switched to another crtc
together. This is because the display backend does the layer
compositing, while the TCON generates the display timings.
This constraint is not supported by DRM.
Here we simply pair up backends and TCONs with the same ID.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908075016.18657-7-wens@csie.org
Now that sun4i_tcon_find_engine_traverse() usage is restricted to the
single input case, we can remove the for_each_available_child_of_node
loop.
While at it, consolidate all the of_node_put calls into a common exit
path.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908075016.18657-6-wens@csie.org
The device tree binding for sun4i-drm says:
For all connections between components up to the TCONs in the display
pipeline, when there are multiple components of the same type at the
same depth, the local endpoint ID must be the same as the remote
component's index. For example, if the remote endpoint is Frontend 1,
then the local endpoint ID must be 1.
We should be able to get the TCON's ID directly from any of the remote
endpoints from its input port. With the ID, we can then go through the
list of registered engines and find a matching one by ID.
However the A31 device tree is incorrect. We assumed that there were no
cross pipeline connections between the backends and TCONs. As a result,
in all the endpoints between the backends and TCONs of the second
display pipeline, the endpoint IDs were incorrectly set to 0, when in
fact they should've been set to 1.
To maintain compatibility with this incorrect device tree, we first
check if the TCON's input port has 1 or many endpoints. If there are
more than 1, then it is likely a fixed version, and we can proceed
with the new method. If there is only 1 endpoint, then it is possibly
an incorrect version, or it could be the SoC only has one pipeline.
In either case we fall back to using the old method of traversing
the input connections to find a matching engine, and then get its
ID.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908075016.18657-5-wens@csie.org
The patch b317fa3ba1 ("drm/sun4i: tcon: Find matching display backend
by device node matching") assumed a one-to-one mapping between TCONs
and backends. This turned out wrong, as we found muxing controls in the
TCON of the A31, and undocumented usage of the backend output selector
of the A20.
Make sun4i_tcon_find_engine() bail out if the current node has multiple
input connections.
Fixes: b317fa3ba1 ("drm/sun4i: tcon: Find matching display backend
by device node matching")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908075016.18657-4-wens@csie.org
The encoder drivers use drm_of_find_possible_crtcs to get upstream
crtcs from the device tree using of_graph. For the results to be
correct, encoders must be probed/bound after _all_ crtcs have been
created. The existing code uses a depth first recursive traversal
of the of_graph, which means the encoders downstream of the TCON
get add right after the first TCON. The second TCON or CRTC will
never be properly associated with encoders connected to it.
Other platforms, such as Rockchip, deal with this by probing all
CRTCs first, then all subsequent components. This is easy to do
since the CRTCs correspond to just one device node, and are the
first nodes in the pipeline.
However with Allwinner SoCs, the function of the CRTC is split
between the display backend (DE 1.0) or mixer (DE 2.0), which does
scan-out and compositing, and the TCON, which generates the display
timing signals. Further complicating the process, there may be a
Dynamic Range Controller between the backend and the TCON. Also, the
backend is preceded by the frontend, with a Display Enhancement Unit
possibly in between.
In a dual display pipeline setup, both frontends can feed either
backend, and both backends can feed either TCON. We want all
components of the same type to be added before the next type in the
pipeline. Fortunately, the pipelines are perfectly symmetric, i.e.
components of the same type are at the same depth when counted from
the frontend. The only exception is the third pipeline in the A80
SoC, which we do not support anyway.
Hence we can use a breadth first search traversal order to add
components. We do not need to check for duplicates. The component
matching system handles this for us.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908075016.18657-3-wens@csie.org
When binding the TCON, we were checking the reset control status and
asserting reset if it wasn't in reset. The check failed to account for
the reset control API returning error codes if the status callback was
not implemented.
Since we want the TCON to be reset in all cases, use reset_control_reset
to force a reset instead.
Fixes: 9026e0d122 ("drm: Add Allwinner A10 Display Engine support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908090016.32224-1-wens@csie.org
-----BEGIN PGP SIGNATURE-----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=5fxW
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 4.14 merge window.
I'm sending this early, as my continuing journey into fatherhood is
occurring really soon now, I'm going to be mostly useless for the next
couple of weeks, though I may be able to read email, I doubt I'll be
doing much patch applications or git sending. If anything urgent pops
up I've asked Daniel/Jani/Alex/Sean to try and direct stuff towards
you.
Outside drm changes:
Some rcar-du updates that touch the V4L tree, all acks should be in
place. It adds one export to the radix tree code for new i915 use
case. There are some minor AGP cleanups (don't see that too often).
Changes to the vbox driver in staging to avoid breaking compilation.
Summary:
core:
- Atomic helper fixes
- Atomic UAPI fixes
- Add YCBCR 4:2:0 support
- Drop set_busid hook
- Refactor fb_helper locking
- Remove a bunch of internal APIs
- Add a bunch of better default handlers
- Format modifier/blob plane property added
- More internal header refactoring
- Make more internal API names consistent
- Enhanced syncobj APIs (wait/signal/reset/create signalled)
bridge:
- Add Synopsys Designware MIPI DSI host bridge driver
tiny:
- Add Pervasive Displays RePaper displays
- Add support for LEGO MINDSTORMS EV3 LCD
i915:
- Lots of GEN10/CNL support patches
- drm syncobj support
- Skylake+ watermark refactoring
- GVT vGPU 48-bit ppgtt support
- GVT performance improvements
- NOA change ioctl
- CCS (color compression) scanout support
- GPU reset improvements
amdgpu:
- Initial hugepage support
- BO migration logic rework
- Vega10 improvements
- Powerplay fixes
- Stop reprogramming the MC
- Fixes for ACP audio on stoney
- SR-IOV fixes/improvements
- Command submission overhead improvements
amdkfd:
- Non-dGPU upstreaming patches
- Scratch VA ioctl
- Image tiling modes
- Update PM4 headers for new firmware
- Drop all BUG_ONs.
nouveau:
- GP108 modesetting support.
- Disable MSI on big endian.
vmwgfx:
- Add fence fd support.
msm:
- Runtime PM improvements
exynos:
- NV12MT support
- Refactor KMS drivers
imx-drm:
- Lock scanout channel to improve memory bw
- Cleanups
etnaviv:
- GEM object population fixes
tegra:
- Prep work for Tegra186 support
- PRIME mmap support
sunxi:
- HDMI support improvements
- HDMI CEC support
omapdrm:
- HDMI hotplug IRQ support
- Big driver cleanup
- OMAP5 DSI support
rcar-du:
- vblank fixes
- VSP1 updates
arcgpu:
- Minor fixes
stm:
- Add STM32 DSI controller driver
dw_hdmi:
- Add support for Rockchip RK3399
- HDMI CEC support
atmel-hlcdc:
- Add 8-bit color support
vc4:
- Atomic fixes
- New ioctl to attach a label to a buffer object
- HDMI CEC support
- Allow userspace to dictate rendering order on submit ioctl"
* tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linux: (1074 commits)
drm/syncobj: Add a signal ioctl (v3)
drm/syncobj: Add a reset ioctl (v3)
drm/syncobj: Add a syncobj_array_find helper
drm/syncobj: Allow wait for submit and signal behavior (v5)
drm/syncobj: Add a CREATE_SIGNALED flag
drm/syncobj: Add a callback mechanism for replace_fence (v3)
drm/syncobj: add sync obj wait interface. (v8)
i915: Use drm_syncobj_fence_get
drm/syncobj: Add a race-free drm_syncobj_fence_get helper (v2)
drm/syncobj: Rename fence_get to find_fence
drm: kirin: Add mode_valid logic to avoid mode clocks we can't generate
drm/vmwgfx: Bump the version for fence FD support
drm/vmwgfx: Add export fence to file descriptor support
drm/vmwgfx: Add support for imported Fence File Descriptor
drm/vmwgfx: Prepare to support fence fd
drm/vmwgfx: Fix incorrect command header offset at restart
drm/vmwgfx: Support the NOP_ERROR command
drm/vmwgfx: Restart command buffers after errors
drm/vmwgfx: Move irq bottom half processing to threads
drm/vmwgfx: Don't use drm_irq_[un]install
...
A single patch switching to a new OF helper.
-----BEGIN PGP SIGNATURE-----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=lksW
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drm-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
sun4i DRM changes for 4.14, take 2
A single patch switching to a new OF helper.
* tag 'sunxi-drm-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
drm/sun4i: use of_graph_get_remote_endpoint()
Now, we can use of_graph_get_remote_endpoint(). Let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
A few changes, but most notably improving the HDMI support merged in 4.13,
by reporting the DDC adapter as an i2c bus, and by adding CEC support
through the CEC framework.
-----BEGIN PGP SIGNATURE-----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=6GJs
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drm-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
Allwinner DRM changes for 4.14
A few changes, but most notably improving the HDMI support merged in 4.13,
by reporting the DDC adapter as an i2c bus, and by adding CEC support
through the CEC framework.
* tag 'sunxi-drm-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
sun4i_hdmi: add CEC support
dt-bindings: display: sunxi: Improve endpoint ID scheme readability
drm/sun4i: tcon: remove unused function
drm/sun4i: Remove useless atomic_check
drm/sun4i: Add if statement instead of depends on
drm/sun4i: hdmi: Implement I2C adapter for A10s DDC bus
drm/sun4i: constify drm_plane_helper_funcs
Make these const as they are only passed to the function
drm_connector_init and the corresponding argument is of type const.
Done using Coccinelle
@match disable optional_qualifier@
identifier s;
@@
static struct drm_connector_funcs s = {...};
@ref@
position p;
identifier match.s;
@@
s@p
@good1@
identifier match.s;
expression e1,e2;
position ref.p;
@@
drm_connector_init(e1,e2,&s@p,...)
@bad depends on !good1@
position ref.p;
identifier match.s;
@@
s@p
@depends on forall !bad disable optional_qualifier@
identifier match.s;
@@
static
+ const
struct drm_connector_funcs s;
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502191712-11231-3-git-send-email-bhumirks@gmail.com
It's dead code, the core handles all this directly now.
The only special case is nouveau and tda988x which used one function
for both legacy modeset code and -nv50 atomic world instead of 2
vtables. But amounts to exactly the same.
v2: Rebase over the panel/brideg refactorings in stm/ltdc.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Peter Senna Tschudin <peter.senna@collabora.com>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Yakir Yang <kuankuan.y@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Romain Perier <romain.perier@collabora.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Hai Li <hali@codeaurora.org>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-tegra@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: zain wang <wzz@rock-chips.com>
Cc: Baoyou Xie <baoyou.xie@linaro.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-8-daniel.vetter@ffwll.ch
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Archit Taneja <architt@codeaurora.org>
Tested-by: Philippe Cornu <philippe.cornu@st.com> (on stm)
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow querying modifiers per plane. Based on this, the client to
enable optimal modifications for framebuffers.
This patch simply allows the DRM drivers to initialize their list of
supported modifiers upon initializing the plane.
v2: A minor addition from Daniel
v3:
* Updated commit message
* s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu)
* Remove some excess newlines (Liviu)
* Update comment for > 64 modifiers (Liviu)
v4: Minor comment adjustments (Liviu)
v5: Some new platforms added due to rebase
v6: Add some missed plane inits (or maybe they're new - who knows at
this point) (Daniel)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Partially-Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[seanpaul changed subject prefix and fixed conflict in stm/ltdc.c]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add HDMI CEC support to the Allwinner A10 SoC.
This SoC uses a poor-man's CEC implementation by polling the CEC pin. It is
using the CEC_PIN core implementation for such devices to do the heavy
lifting. It just provides the callbacks to read/drive the CEC pin.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Even though that function is defined in the TCON header, it's not defined
nor used anywhere. Remove the prototype.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The atomic_check callback is optional, and we don't implement anything in
some parts of our drivers. Let's remove it.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The depends on relationship is obvious, and using an if statement will
propagate it to every option without the need for each and every one of
them to define it.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The drm_driver lastclose callback is called when the last userspace
DRM client has closed. Call drm_fbdev_cma_restore_mode to restore
the fbdev console otherwise the fbdev console will stop working.
Fixes: 9026e0d122 ("drm: Add Allwinner A10 Display Engine support")
Cc: stable@vger.kernel.org
Tested-by: Olliver Schinagl <oliver@schinagl.nl>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The documentation for drm_do_get_edid in drivers/gpu/drm/drm_edid.c states:
"As in the general case the DDC bus is accessible by the kernel at the I2C
level, drivers must make all reasonable efforts to expose it as an I2C
adapter and use drm_get_edid() instead of abusing this function."
Exposing the DDC bus as an I2C adapter is more beneficial as it can be used
for purposes other than reading the EDID such as modifying the EDID or
using the HDMI DDC pins as an I2C bus through the I2C dev interface from
userspace (e.g. i2c-tools).
Implement this for A10s.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
drm_plane_helper_funcs are not supposed to change at runtime.
All functions working with drm_plane_helper_funcs provided by
<drm/drm_plane_helper.h> work with const drm_plane_helper_funcs.
So mark the non-const structs as const.
File size before:
text data bss dec hex filename
981 40 0 1021 3fd drivers/gpu/drm/sun4i/sun4i_layer.o
File size After adding 'const':
text data bss dec hex filename
1021 0 0 1021 3fd drivers/gpu/drm/sun4i/sun4i_layer.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64).
For any other mode, the VIC filed in AVI infoframes should be 0.
HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is
extended to (VIC 1-107).
This patch adds a bool input variable, which indicates if the connected
sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a
HDMI 2.0 VIC to a HDMI 1.4 sink.
This patch touches all drm drivers, who are callers of this function
drm_hdmi_avi_infoframe_from_display_mode but to make sure there is
no change in current behavior, is_hdmi2 is kept as false.
In case of I915 driver, this patch:
- checks if the connected display is HDMI 2.0.
- HDMI infoframes carry one of this two type of information:
- VIC for 4K modes for HDMI 1.4 sinks
- S3D information for S3D modes
As CEA-861-F has already defined VICs for 4K videomodes, this
patch doesn't allow sending HDMI infoframes for HDMI 2.0 sinks,
until the mode is 3D.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <jose.abreu@synopsys.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
PS: This patch touches a few lines in few files, which were
already above 80 char, so checkpatch gives 80 char warning again.
- gpu/drm/omapdrm/omap_encoder.c
- gpu/drm/i915/intel_sdvo.c
V2: Rebase, Added r-b from Andrzej
V3: Addressed review comment from Ville:
- Do not send VICs in both AVI-IF and HDMI-IF
send only one of it.
V4: Rebase
V5: Added r-b from Neil.
Addressed review comments from Ville
- Do not block HDMI vendor IF, instead check for VIC while
handling AVI infoframes
V6: Rebase
V7: Rebase
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-2-git-send-email-shashank.sharma@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
The CRTC .disable() helper operation is deprecated for atomic drivers,
the new .atomic_disable() helper operation being preferred. Convert all
atomic drivers to .atomic_disable() to avoid cargo-cult use of
.disable() in new drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for mediatek
Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc
Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-3-laurent.pinchart+renesas@ideasonboard.com
The old state is useful for drivers that need to perform operations at
enable time that depend on the transition between the old and new
states.
While at it, rename the operation to .atomic_enable() to be consistent
with .atomic_disable(), as the .enable() operation is used by atomic
helpers only.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for imx-drm and mediatek
Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> # for hdlcd and mali-dp
Acked-by: Stefan Agner <stefan@agner.ch> # for fsl-dcu
Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-2-laurent.pinchart+renesas@ideasonboard.com
An unusually big pull request for this merge window, with three notable
features:
- V3s display engine support. This is especially notable because it uses
a different display engine used on the newer Allwinner SoCs (H3, A64
and the likes) that will be quite easily supported now.
- HDMI support for the old Allwinner SoCs. This is enabled only on the
A10s for now, but should be really easy to extend to deal with A10, A20
and A31
- Preliminary work to deal with dual-pipeline SoCs (A10, A20, A31, H3,
etc.). It currently ignores the second pipeline, but we can use the
dual-pipelines bindings. This will be useful to enable the display
pipeline while we work on the dual-pipeline.
-----BEGIN PGP SIGNATURE-----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=HtFh
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drm-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
sun4i-drm changes for 4.13
An unusually big pull request for this merge window, with three notable
features:
- V3s display engine support. This is especially notable because it uses
a different display engine used on the newer Allwinner SoCs (H3, A64
and the likes) that will be quite easily supported now.
- HDMI support for the old Allwinner SoCs. This is enabled only on the
A10s for now, but should be really easy to extend to deal with A10, A20
and A31
- Preliminary work to deal with dual-pipeline SoCs (A10, A20, A31, H3,
etc.). It currently ignores the second pipeline, but we can use the
dual-pipelines bindings. This will be useful to enable the display
pipeline while we work on the dual-pipeline.
* tag 'sunxi-drm-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (27 commits)
drm/sun4i: Add compatible for the A10s pipeline
drm/sun4i: Add HDMI support
dt-bindings: display: sun4i: Add allwinner,tcon-channel property
dt-bindings: display: sun4i: Add HDMI display bindings
drm/sun4i: Ignore the generic connectors for components
drm/sun4i: tcon: multiply the vtotal when not in interlace
drm/sun4i: tcon: Change vertical total size computation inconsistency
drm/sun4i: tcon: Fix tcon channel 1 backporch calculation
drm/sun4i: tcon: Switch mux on only for composite
drm/sun4i: tcon: Move the muxing out of the mode set function
drm/sun4i: tcon: Add channel debug
drm/sun4i: tcon: add support for V3s TCON
drm/sun4i: Add compatible string for V3s display engine
drm/sun4i: add support for Allwinner DE2 mixers
drm/sun4i: add a Kconfig option for sun4i-backend
drm/sun4i: abstract a engine type
drm/sun4i: return only planes for layers created
dt-bindings: add bindings for DE2 on V3s SoC
drm/sun4i: backend: Clarify sun4i_backend_layer_enable debug message
drm/sun4i: Set TCON clock inside sun4i_tconX_mode_set
...
The A10s has a slightly different display pipeline than the A13, with an
HDMI controller.
Add a compatible for it.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The earlier Allwinner SoCs (A10, A10s, A20, A31) have an embedded HDMI
controller.
That HDMI controller is able to do audio and CEC, but those have been left
out for now.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The generic connectors such as hdmi-connector doesn't have any driver in,
so if they are added to the component list, we will be waiting forever for
a non-existing driver to probe.
Add a list of the connectors we want to ignore when building our component
list.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
It appears that the total vertical resolution needs to be doubled when
we're not in interlaced. Make sure that is the case.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Both TCON channels need to have the resolution doubled, since the size the
hardware is going to use is whatever we put in the register divided by two.
However, we handle it differently for the two channels: in the channel 0,
our register access macro does the multiplication of the value passed as
paremeter, while in the channel 1, the macro doesn't do this, and we need
to do it before calling it.
Make this consistent by aligning the channel 0 with the channel 1
behaviour.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
It seems like what's called a backporch in the datasheet is actually the
backporch plus the sync period. Fix that in our driver.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Even though that mux is undocumented, it seems like it needs to be set to 1
when using composite, and 0 when using HDMI.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The muxing can actually happen on both channels on some SoCs, so it makes
more sense to just move it out of the sun4i_tcon1_mode_set function and
create a separate function that needs to be called by the encoders.
Let's do that and convert the existing drivers.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
While all functions have debug logs, the channel enable and disable are not
logged. Make sure this is the case.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Allwinner V3s SoC features a TCON without channel 1.
Add support for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Allwinner V3s features the new "Display Engine 2.0", which can now also
be driven with our subdrivers in sun4i-drm.
Add the compatible string for in sun4i_drv.c, in order to make the
display engine and its components probed.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Allwinner have a new "Display Engine 2.0" in their new SoCs, which comes
with mixers to do graphic processing and feed data to TCON, like the old
backends and frontends.
Add support for the mixer on Allwinner V3s SoC; it's the simplest one.
Currently a lot of functions are still missing -- more investigations
are needed to gain enough information for them.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
As sun4i-backend is now a dedicated module, add an Kconfig option for
it to make it optional, since some build may only use other engines.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
As we are going to add support for the Allwinner DE2 engine in sun4i-drm
driver, we will finally have two types of display engines -- the DE1
backend and the DE2 mixer. They both do some display blending and feed
graphics data to TCON, and is part of the "Display Engine" called by
Allwinner, so I choose to call them both "engine" here.
Abstract the engine type to a new struct with an ops struct, which contains
functions that should be called outside the engine-specified code (in
TCON, CRTC or TV Encoder code).
In order to preserve bisectability, we also switch the backend and layer
code in its own module.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
As we are going to add support for the Allwinner DE2 Mixer in sun4i-drm
driver, we will finally have two types of layers.
Each layer is bound to a drm_plane that is CRTC-specific, so we create
them when initializing CRTC (calling sun4i_layers_init, which will be
generalized in next patch). The drm_plane's will be used when creating
CRTC, but the CRTC initialization code do not care other properties of
the layer, so we let the sun4i_layers_init function return drm_plane's
only.
As we have no need to trace the layers after the CRTC is properly
created, we drop the layers pointer in sun4i_crtc struct.
Doing this uncouples the CRTC code from the type of layer (the
sun4i_layers_init function name is still hardcoded and will be changed
in the next patch), so that we can finally gain support for the
mixer in DE2, which has different layers.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
sun4i_backend_layer_enable can be called to enable or disable a layer.
However the debug message always says "Enable", which is confusing.
This patch makes the debug message vary according to the enable state.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Currently we are configuring the TCON's dot clock or special clock
directly from the encoder mode_set functions. Since we already
provide mode_set helper functions for the TCON's 2 channels, we
can set the respective clock from those helpers, and reduce the
exposure of the TCON's internals.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The tcons and backends have a one-to-one relationship. Their IDs,
or indexes in the documentation, are also the same.
Copy the ID from the associated backend and save it in the tcon
structure. This will later be used when we add support for the
output data path muxes.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
With Allwinner's Display Engine 1.0, each TCON's input is tied to a
specific display backend, and the 2 comprise what is known as a crtc
in DRM KMS land: The layer, framebuffer, and compositing functions are
provided by the backend, while the TCON provides the display timing
signals and vblank interrupts. This 1 to 1 relationship is represented
in the device tree. On some systems there is an intermediate DRC
component.
Pointers to both matching components must be provided when initializing
the crtc. As the backend is always registered before the associated
tcon, we can recursively search upwards through the of_graph to find
the matching backend.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Save a pointer to the backend's underlying device tree node in its
data structure. This will be used later for downstream tcons to find
and match their respective upstream backends.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Some Allwinner SoCs have 2 display pipelines, as in 2 of each
components, including the frontend, backend, TCON, and any other
extras.
As the backend and TCON are always paired together and form the CRTC,
we need to know which backend or TCON we are currently probing, so we
can pair them when initializing the CRTC.
This patch figures out the backend's ID from the device tree and stores
it in the backend's data structure. It does this by looking at the "reg"
property of any remote endpoints connected to the backend's input port.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Now that we support multiple instances of backends, the trailing 0
implying only one backend no longer makes sense.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
To support multiple display pipelines, we need to keep track of the
multiple display backends and TCONs registered with the driver.
Switch to lists to track registered components. Components are only
appended to their respective lists if the bind process was successful.
The TCON bind function now defers if a backend was not registered.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Not any functional changes, but a lot of preliminary rework in order to
support multiple display pipelines.
-----BEGIN PGP SIGNATURE-----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=XlmY
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drm-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
Allwinner DRM changes for 4.12
Not any functional changes, but a lot of preliminary rework in order to
support multiple display pipelines.
* tag 'sunxi-drm-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (26 commits)
MAINTAINERS: Add sun4i-drm git repo
drm/sun4i: Pass pointer for underlying backend into layer init
drm/sun4i: Pass pointers for associated backend and tcon into crtc init
drm/sun4i: tv: Get tcon and backend pointers from associated crtc
drm/sun4i: Use embedded tcon pointer to get the tcon's output port node
drm/sun4i: Fix tcon channel 0 comment about backporch = backporch + hsync
drm/sun4i: Fix TCON clock and regmap initialization sequence
drm/sun4i: Grab reserved memory region
drm/sun4i: Add backend and tcon pointers to sun4i_crtc
drm/sun4i: Add backend pointer to sun4i_layer
drm/sun4i: rgb: Pass tcon pointer when initializing RGB encoder
drm/sun4i: tv: Switch to drm_of_find_possible_crtcs
drm/sun4i: Drop hardcoded .possible_crtcs values from layers
drm/sun4i: Drop primary layer pointer from sun4i_drv
drm/sun4i: Initialize crtc from tcon bind function
drm/sun4i: Move layers from sun4i_drv to sun4i_crtc
drm/sun4i: Add end of list element for sun4i_layers_init's returned list
drm/sun4i: Set drm_crtc.port to the underlying TCON's output port node
drm/sun4i: Make sunxi_rgb2yuv_coef constant
drm/sun4i: Make sun4i_crtc_init return ERR_PTR style error codes
...
Similar to the previous commit, convert drivers open coding OF graph
parsing to use drm_of_find_panel_or_bridge instead.
This changes some error messages to debug messages (in the graph core).
Graph connections are often "no connects" depending on the particular
board, so we want to avoid spurious messages. Plus the kernel is not a
DT validator.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[seanpaul dropped rockchip changes since they're now obsolete]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Less code ftw.
This converts all drivers except the tinydrm helper module. That one
needs more work, since it gets the THIS_MODULE reference from
tinydrm.ko instead of the actual driver module like it should.
Probably needs a similar trick like I used here with generating the
entire struct with a macro.
Cc: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-24-daniel.vetter@ffwll.ch
sun4i_layer only controls the backend hardware block of the display
pipeline.
Pass pointers to the underlying backend in the layer init function,
instead of trying to fetch it from the drm_device structure. This
avoids the headache of trying to figure out which device the layers
actually belong to.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
sun4i_crtc controls the backend and tcon hardware blocks of the display
pipeline.
Pass pointers to the underlying devices into the crtc init function,
instead of trying to fetch them from the drm_device structure. This
avoids the headache of trying to figure out which devices the crtc
is actually associated with.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The drm_encoder structure provides us with a pointer to the crtc
currently tied to the encoder. Subsequently we can extract the
tcon and backend pointers from our crtc structure, instead of
getting it directly from the sun4i_drv structure.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
A pointer to the underlying tcon of the crtc was added to the sun4i_crtc
structure in "drm/sun4i: Add backend and tcon pointers to sun4i_crtc".
However the crtc init function was still using the copy from sun4i_drv
to set drm_crtc.port. This was an oversight when the patches were
reordered.
Switch to using the embedded tcon pointer to get the tcon's ouptut port
and assign it to drm_crtc.port.
This makes it possible to remove the usage of sun4i_drv completely in
subsequent patches.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The backporch programmed into the tcon registers is actually the
backporch + hsync length from the display timings, as indicated in
the interface timing diagrams found in the user manual of the A31
and A33 SoCs.
The comments for channel 0 mistakenly describe the discrepancy as
TCON backporch = frontporch + hsync.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The TCON driver calls sun4i_tcon_init_regmap and sun4i_tcon_init_clocks
in its bind function. The former creates a regmap and writes to several
register to clear its configuration to a known default. The latter
initializes various clocks. This includes enabling the bus clock for
register access and creating the dotclock.
In order for the first step's writes to work, the bus clock must be
enabled which is done in the second step. but the dotclock's ops use
the regmap created in the first step.
Rearrange the function calls such that the clocks are initialized before
the regmap, and split out the dot clock creation to after the regmap is
initialized.
Fixes: 9026e0d122 ("drm: Add Allwinner A10 Display Engine support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
sun4i_crtc controls the backend and tcon hardware blocks of the display
pipeline. Instead of doing so through the master drm structure, leave
pointers to the corresponding backend and tcon in itself.
Also drop the drm_device pointer, since it is no longer needed.
The next step forward would be to pass the pointers in through
sun4i_crtc_init as parameters. This would make it easier to support
multiple display pipelines layer on.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
sun4i_layer only controls the backend hardware block of the display
pipeline. Instead of getting a pointer to the underlying backend
through the drm_device structure, leave one in itself.
Also drop the drm_device pointer, since it is no longer needed.
The next step forward would be to pass the pointer in through
sun4i_layers_init as a parameter. This would make it easier to support
multiple display pipelines layer on.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The RGB encoder represents channel 0 of the TCON. Instead of fetching
the pointer to its TCON from the main sun4i_drv structure, pass it in
as part of the init call, save it, and use it directly in the encoder
and connector callbacks.
We can also drop the otherwise unused sun4i_drv pointer.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Now that the crtcs have their .port field set properly, we can use
drm_of_find_possible_crtcs to find the connected crtcs, instead of
hardcoding the first crtc as usable. The new code also defers binding
when the upstream crtc hasn't been registered yet.
This makes it easier to support multiple tcons/crtcs.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
To support multiple display pipelines, we would have multiple crtcs,
with one or more planes bound to them. Obviously having hardcoded
values for the drm_plane .possible_crtcs field is not going to work.
For primary and cursor planes, the value is set by
drm_crtc_init_with_planes. We just need to set it for overlay planes.
We also fix the value set for the RGB encoder, by referencing the
crtc set in sun4i_drv.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The current layer init code keeps a pointer to the primary plane layer
in sun4i_drv. When we eventually support multiple display pipelines,
this would force us to keep track of primary planes for all crtcs. And
these pointers only get used at bind time.
Instead, have the crtc init code iterate through the returned layers
to find the primary and cursor layers. And drop the pointer from the
sun4i_drv structure.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The tcon provides part of the functionality of the crtc, and also
provides the device node for the output port of the crtc. To be able
to use drm_of_find_possible_crtcs(), all crtc must be initialized before
any downstream encoders. The other part of the crtc is the display
backend.
The Rockchip DRM driver does this by first binding all vops, which is
their crtc, and this step also creates the crtc objects. Then all
remaining hardware components are bound. With the Allwinner display
pipeline, we have multiple components comprising the crtc, and varying
depths of the display pipeline. Since components are added with a depth
first search of the of_graph, we can initialize the crtc object within
the tcon bind function. Since the backend precedes the tcon, and the
backends cannot be muxed or switched around, we can be sure that the
associated backend is already initialized.
This patch also moves the crtc pointer from the main drm_device data to
the tcon device data. Besides the crtc callbacks, the crtc structure is
only used within the tcon driver to signal vblank events from its
interrupt handler.
As the crtc and layer bits are now called from the tcon bits, we must
move them from the sun4i-drm module to the sun4i-tcon module to avoid
circular dependencies between the two modules. This is because sun4i-drm
also calls into sun4i-tcon.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This patch moves the sun4i_layers_init call from sun4i_drv_bind to
sun4i_crtc_init, and the layers pointer from struct sun4i_drv to
struct sun4i_crtc.
The layers are bound to a specific crtc, and they are not directly
used once initiated. They are used through their included drm_plane
structures.
Moving the layers into the crtc facilitates binding them to the crtc
explicitly, by setting the corresponding bit in their .possible_crtcs
fields right after the crtc is initialized. This is done in a later
patch.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The number of defined planes in sun4i_layer is unknown to other parts
of the sun4i drm driver. Since the return value of sun4i_layers_init
is a list of layers, make it return 1 more empty layer as an end of
list guard value.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The way drm_of_find_possible_crtcs works is it tries to match the
remote-endpoint of the given node's various endpoints to all the
crtc's .port field. Thus we need to set drm_crtc.port to the output
port node of the underlying TCON.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
sunxi_rgb2yuv_coef is a table of RGB-to-YUV conversion coefficients.
They are programmed into the hardware, and can be declared constant.
Reported-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
sun4i_crtc_init can fail for a number of reasons. Instead of returning
a NULL pointer when it fails, pass back the encountered error using
ERR_PTR.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
sun4i_layers_init allocates an array to store pointers to newly created
layers returned by sun4i_layer_init_one(), but fails to actually store
them. But it actually returns the empty array to unsuspecting users.
Save the pointers in the array, so that they may be used later.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The assignment found in the main loop in sun4i_layers_init:
struct sun4i_layer *layer = layers[i];
is useless as it gets overwritten by the next line:
layer = sun4i_layer_init_one(drm, plane);
Drop the assignment.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
In sun4i_layers_init we are allocating an array of pointers to struct
sun4i_layer:
layers = devm_kcalloc(drm->dev, ARRAY_SIZE(sun4i_backend_planes),
sizeof(**layers), GFP_KERNEL);
The element size should be the size of an individual element of the
array. Change it to sizeof(*layers) to avoid wasting a lot of memory.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
drm_vblank_init can fail due to insufficient memory. Ignoring the error
and proceeding may cause the kernel to dereference an invalid pointer
when vblank is enabled.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The master bind function calls numerous drm functions which initialize
underlying structures. It also tries to bind the various components
of the display pipeline, some of which may add additional drm objects.
This patch adds proper cleanup functions in the error path of the
master bind function.
This requires the patch "drm/sun4i: Move drm_mode_config_cleanup call
to main driver", which splits out drm_mode_config_cleanup from
sun4i_framebuffer_free so we can call it separately.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
drm_mode_config_cleanup is the complement of drm_mode_config_init, which
is called in the bind function of sun4i_drv. drm_mode_config_cleanup
should be put in the unbind function to match.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The vblank hooks in struct drm_driver are deprecated and only meant for
legacy drivers. For modern drivers with DRIVER_MODESET flag, the hooks
in struct drm_crtc_funcs should be used instead.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-20-git-send-email-shawnguo@kernel.org
Core code already makes drm_driver.get_vblank_counter hook optional by
letting drm_vblank_no_hw_counter be the default implementation for the
function hook. So the drm_vblank_no_hw_counter assignment in the driver
code becomes redundant and can be removed now.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Eric Anholt <eric@anholt.net>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-3-git-send-email-shawnguo@kernel.org
Instead of receiving the num_crts as a parameter, we can read it
directly from the mode_config structure. I audited the drivers that
invoke this helper and I believe all of them initialize the mode_config
struct accordingly, prior to calling the fb_helper.
I used the following coccinelle hack to make this transformation, except
for the function headers and comment updates. The first and second
rules are split because I couldn't find a way to remove the unused
temporary variables at the same time I removed the parameter.
// <smpl>
@r@
expression A,B,D,E;
identifier C;
@@
(
- drm_fb_helper_init(A,B,C,D)
+ drm_fb_helper_init(A,B,D)
|
- drm_fbdev_cma_init_with_funcs(A,B,C,D,E)
+ drm_fbdev_cma_init_with_funcs(A,B,D,E)
|
- drm_fbdev_cma_init(A,B,C,D)
+ drm_fbdev_cma_init(A,B,D)
)
@@
expression A,B,C,D,E;
@@
(
- drm_fb_helper_init(A,B,C,D)
+ drm_fb_helper_init(A,B,D)
|
- drm_fbdev_cma_init_with_funcs(A,B,C,D,E)
+ drm_fbdev_cma_init_with_funcs(A,B,D,E)
|
- drm_fbdev_cma_init(A,B,C,D)
+ drm_fbdev_cma_init(A,B,D)
)
@@
identifier r.C;
type T;
expression V;
@@
- T C;
<...
when != C
- C = V;
...>
// </smpl>
Changes since v1:
- Rebased on top of the tip of drm-misc-next.
- Remove mention to sti since a proper fix got merged.
Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk
Just one minor fix.
-----BEGIN PGP SIGNATURE-----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=SSQZ
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drm-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
Allwinner DRM changes for 4.11
Just one minor fix.
* tag 'sunxi-drm-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
drm/sun4i: Fix a return value in case of error
If 'sun4i_backend_drm_format_to_layer()' does not return 0, then 'val' is
left unmodified.
As it is not initialized either, the return value can be anything.
It is likely that returning the error code was expected here.
As the only caller of 'sun4i_backend_update_layer_formats()' does not check
the return value, this fix is purely theorical.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Instead of linking encoders and bridges in every driver (and getting it
wrong half of the time, as many drivers forget to set the drm_bridge
encoder pointer), do so in core code. The drm_bridge_attach() function
needs the encoder and optional previous bridge to perform that task,
update all the callers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Stefan Agner <stefan@agner.ch> # For DCU
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # For atmel-hlcdc
Acked-by: Vincent Abriou <vincent.abriou@st.com> # For STI
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # For sun4i
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> # For hisilicon
Acked-by: Jyri Sarha <jsarha@ti.com> # For tilcdc
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-4-git-send-email-laurent.pinchart+renesas@ideasonboard.com
Backmerge v4.9-rc8 to get at
commit e94bd1736f
Author: Michel Dänzer <michel.daenzer@amd.com>
Date: Wed Nov 30 17:30:01 2016 +0900
drm: Don't call drm_for_each_crtc with a non-KMS driver
so I can apply Michel's follow-up patch.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYRIGyAAoJEHm+PkMAQRiG2ksH/jwMUT9j6glbwESxbn1YTqTM
QcBT5AMc7D0wNuidQe0hWZMtG4RbC+4ZhxzZl2wPgA2gueJ+rBnyX7bgtA7ka8ka
Fdc3u/Q1v38HPzf8iBnxcdCs40VgsoMLjFYCXrpOxuGDNKYzRd+Q8aI2TeGvzbyi
X8+6oAWifBwo2oA06jfcuUncEWbyDDyK9aQksmfKOpjHdb26yELPEhsPOlds1g7E
jYLnvUVnU2CoFaumta+rZQ0kzLdc4Ntu0wEao6WzJuQKsgoID+tS/6iudi8cUhDp
YowGAVoOfr6rAJB0mwrDVfugpamaT3386XKyocdNsK0/jR60UIJ8x+WzvvSU+lY=
=JTBj
-----END PGP SIGNATURE-----
Backmerge tag 'v4.9-rc8' into drm-next
Linux 4.9-rc8
Daniel requested this so we could apply some follow on fixes cleanly to -next.
Many drivers (21 to be exact) create connectors that are always
connected (for instance to an LVDS or DSI panel). Instead of forcing
them to implement a dummy .detect() handler, make the callback optional
and consider the connector as always connected in that case.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[seanpaul fixed small conflict in rcar-du/rcar_du_lvdscon.c]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Another pile of misc:
- Explicit fencing for atomic! Big thanks to Gustavo, Sean, Rob 3x, Brian
and anyone else I've forgotten to make this happen.
- roll out fbdev helper ops to drivers (Stefan Christ)
- last bits of drm_crtc split-up&kerneldoc
- some drm_irq.c crtc functions cleanup
- prepare_fb helper for cma, works correctly with explicit fencing (Marek
Vasut)
- misc small patches all over
* tag 'drm-misc-next-2016-11-16' of git://anongit.freedesktop.org/git/drm-misc: (51 commits)
drm/fence: add out-fences support
drm/fence: add fence timeline to drm_crtc
drm/fence: add in-fences support
drm/bridge: analogix_dp: return error if transfer none byte
drm: drm_irq.h header cleanup
drm/irq: Unexport drm_vblank_on/off
drm/irq: Unexport drm_vblank_count
drm/irq: Make drm_vblank_pre/post_modeset internal
drm/nouveau: Use drm_crtc_vblank_off/on
drm/amdgpu: Use drm_crtc_vblank_on/off for dce6
drm/color: document NULL values and default settings better
drm: Drop externs from drm_crtc.h
drm: Move tile group code into drm_connector.c
drm: Extract drm_mode_config.[hc]
Revert "drm: Add aspect ratio parsing in DRM layer"
Revert "drm: Add and handle new aspect ratios in DRM layer"
drm/print: Move kerneldoc next to definition
drm: Consolidate dumb buffer docs
drm: Clean up kerneldoc for struct drm_driver
drm: Extract drm_drv.h
...
Support for the Allwinner A31 SoC display engine using the sun4i-drm
driver.
-----BEGIN PGP SIGNATURE-----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=fERq
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drm-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
sun4i-drm changes for 4.10
Support for the Allwinner A31 SoC display engine using the sun4i-drm
driver.
* tag 'sunxi-drm-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
drm/sun4i: Add a few formats
drm/sun4i: Add compatible strings for A31/A31s display pipelines
drm/sun4i: Add compatible string for A31/A31s TCON (timing controller)
drm/sun4i: tcon: Move SoC specific quirks to a DT matched data structure
drm/sun4i: sun6i-drc: Support DRC on A31 and A31s
These component_ops structures are only used as the second argument to
component_add and component_del, which are declared as const, so the
structures can be declared as const as well.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct component_ops i@p = { ... };
@ok1@
identifier r.i;
expression e1;
position p;
@@
component_add(e1,&i@p)
@ok2@
identifier r.i;
expression e1;
position p;
@@
component_del(e1, &i@p)
@bad@
position p != {r.p,ok1.p,ok2.p};
identifier r.i;
struct component_ops e;
@@
e@i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct component_ops i = { ... };
// </smpl>
The result of the size command before the change is (arm):
text data bss dec hex filename
5266 236 8 5510 1586 sun4i_backend.o
6393 236 8 6637 19ed sun4i_tcon.o
3700 368 8 4076 fec sun4i_tv.o
1668 108 0 1776 6f0 sun6i_drc.o
and after the change:
text data bss dec hex filename
5274 228 8 5510 1586 sun4i_backend.o
6401 228 8 6637 19ed sun4i_tcon.o
3708 360 8 4076 fec sun4i_tv.o
1676 100 0 1776 6f0 sun6i_drc.o
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478971198-3659-1-git-send-email-Julia.Lawall@lip6.fr
If 'sun4i_layers_init()' returns an error, propagate it instead of
returning -EINVAL unconditionally.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The planes can do more than what was previously exposed. Add support for
them.
Since we still have the issue that the primary plane cannot have any alpha
component, we will expose only the non-alpha formats in the primary
formats, and the alpha formats will be exposed in the overlays.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
'sun4i_layers_init()' returns an error pointer in case of error, not
NULL. So test it with IS_ERR.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Convert DT component matching to use component_match_add_release().
Acked-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/E1bwo6l-0005Io-Q1@rmk-PC.armlinux.org.uk
The A31's display pipeline has 2 frontends, 2 backends, and 2 TCONs. It
also has new display enhancement blocks, such as the DRC (Dynamic Range
Controller), the DEU (Display Enhancement Unit), and the CMU (Color
Management Unit). It supports HDMI, MIPI DSI, and 2 LCD/LVDS channels.
The A31s display pipeline is almost the same, just without MIPI DSI.
Only the TCON seems to be different, due to the missing mux for MIPI
DSI.
Add compatible strings for both of them.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A31 TCON has mux controls for how TCON outputs are routed to the
HDMI and MIPI DSI blocks.
Since the A31s does not have MIPI DSI, it only has a mux for the HDMI
controller input.
This patch only adds support for the compatible strings. Actual support
for the mux controls should be added with HDMI and MIPI DSI support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
We already have some differences between the 2 supported SoCs.
More will be added as we support other SoCs. To avoid bloating
the probe function with even more conditionals, move the quirks
to a separate data structure that's tied to the compatible string.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A31 and A31s also have the DRC as part of the display pipeline.
As we know virtually nothing about them, just add compatible strings
for both SoCs to the stub driver.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The atomic helpers already call the drm_bridge_enable on our behalf,
there's no need to do it a second time.
Reported-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The panel should be enabled after the controller so that we do not have
visual glitches on the panel while the controller is setup. Similarly,
the panel should be disabled before the controller.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
A few fixes for the sun4i drm driver that range, including some fixes that
might prevent multiple planes from working depending on the sequence where
they are enabled.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Ondz
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drm-fixes-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
Allwinner sun4i DRM fixes for 4.9
A few fixes for the sun4i drm driver that range, including some fixes that
might prevent multiple planes from working depending on the sequence where
they are enabled.
* tag 'sunxi-drm-fixes-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
drm/sun4i: Fix the high buffer address mask
drm/sun4i: tv: Check mode pointer
drm/sun4i: Fix formats usable by the primary plane
drm/sun4i: dotclock: Round to closest clock rate
drm/sun4i: Fix sparse warnings
drm/sun4i: dotclock: Allow divider = 127
drm/sun4i: dotclock: Fix clock rate read back calcation
drm/sun4i: backend: remove redundant dev_err call in sun4i_backend_bind()
There are many reasons other than ENOMEM that drm_dev_init() can
fail. Return ERR_PTR rather than NULL to be able to distinguish
these in the caller.
Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160921145919.13754-2-teg@jklm.no
The highest 3bits of the 4 layers buffers are all part of the same
register. However, our mask computation was wrong, leading to all the
lowest register bits being removed when we use regmap_update_bits, which
will lead to the buffers being set to some random part of the RAM.
Fix our mask.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The drm_mode_create call might return NULL in case of a failure, and the
current code doesn't check for that. Make sure it does.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Even though all our planes can support the ARGB formats, the lowest plane
(ie the primary plane) cannot use the alpha component, otherwise it will
just result in the transparent area being entirely black.
Since some applications will still require the ARGB format, let's force the
format to XRGB to drop the alpha component entirely.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
With display pixel clocks we want to have the closest possible clock
rate, to minimize timing and refresh rate skews. Whether the actual
clock rate is higher or lower than the requested rate is less important.
Also check candidates against the requested rate, rather than the
ideal parent rate, the varying dividers also influence the difference
between the requested rate and the rounded rate.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
drm/sun4i/sun4i_tv.c:181:21: warning: symbol 'ntsc_video_levels' was not declared. Should it be static?
drm/sun4i/sun4i_tv.c:185:21: warning: symbol 'pal_video_levels' was not declared. Should it be static?
drm/sun4i/sun4i_tv.c:189:21: warning: symbol 'ntsc_burst_levels' was not declared. Should it be static?
drm/sun4i/sun4i_tv.c:193:21: warning: symbol 'pal_burst_levels' was not declared. Should it be static?
drm/sun4i/sun4i_tv.c:197:20: warning: symbol 'ntsc_color_gains' was not declared. Should it be static?
drm/sun4i/sun4i_tv.c:201:20: warning: symbol 'pal_color_gains' was not declared. Should it be static?
drm/sun4i/sun4i_tv.c:205:26: warning: symbol 'ntsc_resync_parameters' was not declared. Should it be static?
drm/sun4i/sun4i_tv.c:209:26: warning: symbol 'pal_resync_parameters' was not declared. Should it be static?
drm/sun4i/sun4i_tv.c:213:16: warning: symbol 'tv_modes' was not declared. Should it be static?
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The dot clock divider is 7 bits wide, and the divider range is 1 ~ 127,
or 6 ~ 127 if phase offsets are used. The 0 register value also
represents a divider of 1 or bypass.
Make the end condition of the for loop inclusive of 127 in the
round_rate callback.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
When reading back the divider set in the register, we mask off the
bits that aren't part of the divider. Unfortunately the mask used
here was not converted from the field width.
Fix this by converting the field width to a proper bit mask.
Fixes: 9026e0d122 ("drm: Add Allwinner A10 Display Engine support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This tag adds the support of a new SoC to sun4i-drm (the Allwinner A33),
and the usual few fixes and enhancements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=532q
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drm-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
Allwinner DRM changes for 4.9
This tag adds the support of a new SoC to sun4i-drm (the Allwinner A33),
and the usual few fixes and enhancements
* tag 'sunxi-drm-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
drm/sun4i: add missing header dependencies
drm/sun4i: Add a DRC driver
drm/sun4i: backend: Handle the SAT
drm/sun4i: support A33 tcon
drm/sun4i: support TCONs without channel 1
drm/sun4i: Clear encoder->bridge if a bridge is not found
drm/sun4i: rgb: add missing calls to drm_panel_{prepare,unprepare}
drm/sun4i: Remove redundant dev_err call in sun4i_tcon_init_regmap()
drm/sun4i: Add bridge support
drm/sun4i: Move panel retrieval in RGB connector
drm/sun4i: Store TCON's device structure pointer
We get 5 warnings when building kernel with W=1:
drivers/gpu/drm/sun4i/sun4i_framebuffer.c:33:23: warning: no previous prototype for 'sun4i_framebuffer_init' [-Wmissing-prototypes]
drivers/gpu/drm/sun4i/sun4i_framebuffer.c:47:6: warning: no previous prototype for 'sun4i_framebuffer_free' [-Wmissing-prototypes]
drivers/gpu/drm/sun4i/sun4i_rgb.c:202:5: warning: no previous prototype for 'sun4i_rgb_init' [-Wmissing-prototypes]
drivers/gpu/drm/sun4i/sun4i_dotclock.c:151:5: warning: no previous prototype for 'sun4i_dclk_create' [-Wmissing-prototypes]
drivers/gpu/drm/sun4i/sun4i_dotclock.c:186:5: warning: no previous prototype for 'sun4i_dclk_free' [-Wmissing-prototypes]
In fact, these functions are declared in
drivers/gpu/drm/sun4i/sun4i_framebuffer.h,
drivers/gpu/drm/sun4i/sun4i_rgb.h,
drivers/gpu/drm/sun4i/sun4i_dotclock.h,
so this patch adds missing header dependencies.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A33 pipeline also has a component called DRC. Even though its exact
features and programming model is not known (or documented), it needs to
be clocked for the pipeline to carry the video signal all the way.
Add a minimal driver for it that just claim the needed resources for the
pipeline to operate properly.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
The A33 has an block called SAT that is part of the backend that needs to
be clocked and out of reset to be able for the backend to operate properly.
Extend the binding to have the SAT resources listed, and claim them when
the backend probes.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
