Commit Graph

308 Commits

Author SHA1 Message Date
Rafael J. Wysocki
fc72395780 Merge branches 'acpi-pci', 'acpi-misc' and 'acpi-tools'
* acpi-pci:
  ACPI,PCI,IRQ: remove SCI penalize function
  ACPI,PCI,IRQ: remove redundant code in acpi_irq_penalty_init()
  ACPI,PCI,IRQ: reduce static IRQ array size to 16
  ACPI,PCI,IRQ: reduce resource requirements

* acpi-misc:
  ACPI / sysfs: fix error code in get_status()
  ACPI / device_sysfs: Clean up checkpatch errors
  ACPI / device_sysfs: Change _SUN and _STA show functions error return to EIO
  ACPI / device_sysfs: Add sysfs support for _HRV hardware revision
  arm64: defconfig: Enable ACPI
  ACPI / ARM64: Remove EXPERT dependency for ACPI on ARM64
  ACPI / ARM64: Don't enable ACPI by default on ARM64
  acer-wmi: Use acpi_dev_found()
  eeepc-wmi: Use acpi_dev_found()
  ACPI / utils: Rename acpi_dev_present()

* acpi-tools:
  tools/power/acpi: close file only if it is open
2016-05-16 16:45:48 +02:00
Heikki Krogerus
0224a4a30b device property: Avoid potential dereferences of invalid pointers
Since fwnode may hold ERR_PTR(-ENODEV) or it may be NULL,
the fwnode type checks is_of_node(), is_acpi_node() and is
is_pset_node() need to consider it. Using IS_ERR_OR_NULL()
to check it.

Fixes: 0d67e0fa16 (device property: fix for a case of use-after-free)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-27 23:40:02 +02:00
Lukas Wunner
c68ae33e7f ACPI / utils: Rename acpi_dev_present()
acpi_dev_present() was originally named after pci_dev_present()
to signify the similarity of the two functions.

However Rafael J. Wysocki pointed out that the exported function
acpi_dev_present() is easily confused with the non-exported
acpi_device_is_present(). Additionally in ACPI parlance the term
"present" usually refers to the "device is present" bit returned
by the _STA control method, yet acpi_dev_present() merely checks
presence in the namespace. It does not invoke _STA at all, let
alone check the "device is present" bit.

As suggested by Rafael, rename the function to acpi_dev_found()
and adjust all existing call sites.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-09 03:12:58 +02:00
Rafael J. Wysocki
42d287d1a1 Merge branches 'acpi-scan', 'acpi-bus', 'acpi-osl' and 'acpi-pm'
* acpi-scan:
  ACPI: Fix white space in a structure definition
  ACPI / utils: Add acpi_dev_present()
  ACPI / scan: Fix acpi_bus_id_list bookkeeping
  ACPI / scan: set status to 0 if _STA failed

* acpi-bus:
  ACPI / bus: Show _OSC UUID when _OSC fails
  ACPI / bus: Tidy up _OSC error spacing

* acpi-osl:
  ACPI / OSL: Add kerneldoc comments to memory mapping functions

* acpi-pm:
  ACPI / PM: Support D3 COLD device in old BIOS for ZPODD
2016-01-12 01:10:03 +01:00
Ken Xue
cd7f84c028 ACPI / PM: Support D3 COLD device in old BIOS for ZPODD
D3cold is only regarded as valid if the "_PR3" object is
present for the given device after the commit 20dacb71ad
("ACPI/PM: Rework device power management to follow ACPI 6").

But some old BIOS only defined "_PS3" for the D3COLD device,
such as ZPODD device. And old kernel also believes the device with
"_PS3" is a D3COLD device.

So, add some logics for supporting D3 COLD device with old BIOS
which is compatible with earlier ACPI spec and kernel behavior.

Link: http://marc.info/?l=linux-acpi&m=144946938709759&w=2
Signed-off-by: Ken Xue <Ken.Xue@amd.com>
Reported-and-tested-by: Gang Long <Gang.Long@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-09 23:36:22 +01:00
Lukas Wunner
2d12b6b381 ACPI / utils: Add acpi_dev_present()
There's an idiom in use by 7 Linux drivers to detect the presence of a
particular ACPI HID by walking the namespace with acpi_get_devices().
The callback passed to acpi_get_devices() is mostly identical across
the drivers, leading to lots of duplicate code.

Add acpi_dev_present(), the ACPI equivalent to pci_dev_present(),
allowing us to deduplicate all that boilerplate in the drivers.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-09 01:31:41 +01:00
Rafael J. Wysocki
f2115faaf0 Merge branch 'acpi-pci'
* acpi-pci:
  PCI: ACPI: Add support for PCI device DMA coherency
  PCI: OF: Move of_pci_dma_configure() to pci_dma_configure()
  of/pci: Fix pci_get_host_bridge_device leak
  device property: ACPI: Remove unused DMA APIs
  device property: ACPI: Make use of the new DMA Attribute APIs
  device property: Adding DMA Attribute APIs for Generic Devices
  ACPI: Adding DMA Attribute APIs for ACPI Device
  device property: Introducing enum dev_dma_attr
  ACPI: Honor ACPI _CCA attribute setting

Conflicts:
	drivers/crypto/ccp/ccp-platform.c
2015-11-07 01:30:10 +01:00
Suthikulpanit, Suravee
ab3d527329 device property: ACPI: Remove unused DMA APIs
These DMA APIs are replaced with the newer versions, which return
the enum dev_dma_attr. So, we can safely remove them.

Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-07 01:29:22 +01:00
Suthikulpanit, Suravee
b84f196d96 ACPI: Adding DMA Attribute APIs for ACPI Device
Adding acpi_get_dma_attr() to query DMA attributes of ACPI devices.
It returns the enum dev_dma_attr, which communicates DMA information
more clearly. This API replaces the acpi_check_dma(), which will be
removed in subsequent patch.

This patch also provides a convenient function, acpi_dma_supported(),
to check DMA support of the specified ACPI device.

Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-07 01:29:21 +01:00
Jeremy Linton
d764c21c7b ACPI: Honor ACPI _CCA attribute setting
ACPI configurations can now mark devices as noncoherent,
support that choice.

NOTE: This is required to support USB on ARM Juno Development Board.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-07 01:29:21 +01:00
Rafael J. Wysocki
343ccb040e Merge branches 'acpi-scan', 'acpi-tables', 'acpi-ec' and 'acpi-assorted'
* acpi-scan:
  ACPI / scan: use kstrdup_const() in acpi_add_id()
  ACPI / scan: constify struct acpi_hardware_id::id
  ACPI / scan: constify first argument of struct acpi_scan_handler::match

* acpi-tables:
  ACPI / tables: test the correct variable
  x86, ACPI: Handle apic/x2apic entries in MADT in correct order
  ACPI / tables: Add acpi_subtable_proc to ACPI table parsers

* acpi-ec:
  ACPI / EC: Fix a race issue in acpi_ec_guard_event()
  ACPI / EC: Fix query handler related issues

* acpi-assorted:
  ACPI: change acpi_sleep_proc_init() to return void
  ACPI: change init_acpi_device_notify() to return void
2015-10-25 22:54:46 +01:00
Rasmus Villemoes
844142c3f8 ACPI / scan: constify struct acpi_hardware_id::id
This is preparation for using kstrdup_const to initialize that member.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-15 02:57:55 +02:00
Rasmus Villemoes
636c19d389 ACPI / scan: constify first argument of struct acpi_scan_handler::match
One wouldn't expect a "match" function modify the string it searches
for, and indeed the only instance of the struct
acpi_scan_handler::match callback, acpi_pnp_match, can easily be
changed. While there, update its helper matching_id().

This is also preparation for constifying struct acpi_hardware_id::id.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-15 02:56:29 +02:00
Rafael J. Wysocki
3a7a2ab839 ACPI / property: Extend fwnode_property_* to data-only subnodes
Modify is_acpi_node() to return "true" for ACPI data-only subnodes as
well as for ACPI device objects and change the name of to_acpi_node()
to to_acpi_device_node() so it is clear that it covers ACPI device
objects only.  Accordingly, introduce to_acpi_data_node() to cover
data-only subnodes in an analogous way.

With that, make the fwnode_property_* family of functions work with
ACPI data-only subnodes introduced previously.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2015-09-15 01:47:34 +02:00
Rafael J. Wysocki
263b4c1a64 ACPI / property: Expose data-only subnodes via sysfs
Add infrastructure needed to expose data-only subnodes of ACPI
device objects introduced previously via sysfs.

Each data-only subnode is represented as a sysfs directory under
the directory corresponding to its parent object (a device or a
data-only subnode).  Each of them has a "path" attribute (containing
the full ACPI namespace path to the object the subnode data come from)
at this time.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2015-09-15 01:47:34 +02:00
Rafael J. Wysocki
445b0eb058 ACPI / property: Add support for data-only subnodes
In some cases, the information expressed via device properties is
hierarchical by nature.  For example, the properties of a composite
device consisting of multiple semi-dependent components may need
to be represented in the form of a tree of property data sets
corresponding to specific components of the device.

Unfortunately, using ACPI device objects for this purpose turns out
to be problematic, mostly due to the assumption made by some operating
systems (that platform firmware generally needs to work with) that
each device object in the ACPI namespace represents a device requiring
a separate driver.  That assumption leads to complications which
reportedly are impractically difficult to overcome and a different
approach is needed for the sake of interoperability.

The approach implemented here is based on extending _DSD via pointers
(links) to additional ACPI objects returning data packages formatted
in accordance with the _DSD formatting rules defined by Section 6.2.5
of ACPI 6.  Those additional objects are referred to as data-only
subnodes of the device object containing the _DSD pointing to them.

The links to them need to be located in a separate section of the
_DSD data package following UUID dbb8e3e6-5886-4ba6-8795-1319f52a966b
referred to as the Hierarchical Data Extension UUID as defined in [1].
Each of them is represented by a package of two strings.  The first
string in that package (the key) is regarded as the name of the
data-only subnode pointed to by the link.  The second string in it
(the target) is expected to hold the ACPI namespace path (possibly
utilizing the usual ACPI namespace search rules) of an ACPI object
evaluating to a data package extending the _DSD.

The device properties initialization code follows those links,
creates a struct acpi_data_node object for each of them to store
the data returned by the ACPI object pointed to by it and processes
those data recursively (which may lead to the creation of more
struct acpi_data_node objects if the returned data package contains
the Hierarchical Data Extension UUID section with more links in it).

All of the struct acpi_data_node objects are present until the the
ACPI device object containing the _DSD with links to them is deleted
and they are deleted along with that object.

[1]: http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.pdf

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2015-09-15 01:47:34 +02:00
Jarkko Nikula
4c62dbbce9 ACPI: Remove FSF mailing addresses
There is no need to carry potentially outdated Free Software Foundation
mailing address in file headers since the COPYING file includes it.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-08 02:27:32 +02:00
Rafael J. Wysocki
132c242d95 Merge branches 'acpi-video', 'device-properties', 'pm-sleep' and 'pm-cpuidle'
* acpi-video:
  ACPI / video: Inline acpi_video_set_dmi_backlight_type

* device-properties:
  ACPI / OF: Rename of_node() and acpi_node() to to_of_node() and to_acpi_node()

* pm-sleep:
  PM / sleep: Increase default DPM watchdog timeout to 60
  PM / hibernate: re-enable nonboot cpus on disable_nonboot_cpus() failure

* pm-cpuidle:
  tick/idle/powerpc: Do not register idle states with CPUIDLE_FLAG_TIMER_STOP set in periodic mode
2015-06-26 03:30:37 +02:00
Alexander Sverdlin
c181fb3e72 ACPI / OF: Rename of_node() and acpi_node() to to_of_node() and to_acpi_node()
Commit 8a0662d9 introduced of_node and acpi_node symbols in global namespace
but there were already ~63 of_node local variables or function parameters
(no single acpi_node though, but anyway).

After debugging undefined but used of_node local varible (which turned out
to reference static function of_node() instead) it became clear that the names
for the functions are too short and too generic for global scope.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-24 20:03:10 +02:00
Rafael J. Wysocki
e193cd15ae Merge branch 'acpi-cca'
* acpi-cca:
  ufs: fix TRUE and FALSE re-define build error
  megaraid_sas: fix TRUE and FALSE re-define build error
  amd-xgbe: Unify coherency checking logic with device_dma_is_coherent()
  crypto: ccp - Unify coherency checking logic with device_dma_is_coherent()
  device property: Introduces device_dma_is_coherent()
  arm64 : Introduce support for ACPI _CCA object
  ACPI / scan: Parse _CCA and setup device coherency
2015-06-19 01:17:35 +02:00
Rafael J. Wysocki
4f1fd900c2 Merge branches 'acpi-pm', 'acpi-apei', 'acpi-osl' and 'acpi-pci'
* acpi-pm:
  ACPI / PM: Add missing pm_generic_complete() invocation
  ACPI / PM: Turn power resources on and off in the right order during resume
  ACPI / PM: Rework device power management to follow ACPI 6
  ACPI / PM: Drop stale comment from acpi_power_transition()

* acpi-apei:
  GHES: Make NMI handler have a single reader
  GHES: Elliminate double-loop in the NMI handler
  GHES: Panic right after detection
  GHES: Carve out the panic functionality
  GHES: Carve out error queueing in a separate function

* acpi-osl:
  ACPI / osl: use same type for acpi_predefined_names values as in definition

* acpi-pci:
  ACPI / PCI: remove stale list_head in struct acpi_prt_entry
2015-06-19 01:16:21 +02:00
Suthikulpanit, Suravee
d056267483 ACPI / scan: Parse _CCA and setup device coherency
This patch implements support for ACPI _CCA object, which is introduced in
ACPIv5.1, can be used for specifying device DMA coherency attribute.

The parsing logic traverses device namespace to parse coherency
information, and stores it in acpi_device_flags. Then uses it to call
arch_setup_dma_ops() when creating each device enumerated in DSDT
during ACPI scan.

This patch also introduces acpi_dma_is_coherent(), which provides
an interface for device drivers to check the coherency information
similarly to the of_dma_is_coherent().

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15 14:40:48 +02:00
Rafael J. Wysocki
20dacb71ad ACPI / PM: Rework device power management to follow ACPI 6
The ACPI 6 specification has made some changes in the device power
management area.  In particular:

 * The D3hot power state is now supposed to be always available
   (instead of D3cold) and D3cold is only regarded as valid if the
   _PR3 object is present for the given device.

 * The required ordering of transitions into power states deeper than
   D0 is now such that for a transition into state Dx the _PSx method
   is supposed to be executed first, if present, and the states of
   the power resources the device depends on are supposed to be
   changed after that.

 * It is now explicitly forbidden to transition devices from
   lower-power (deeper) into higher-power (shallower) power states
   other than D0.

Those changes have been made so the specification reflects the
Windows' device power management code that the vast majority of
systems using ACPI is validated against.

To avoid artificial differences in ACPI device power management
between Windows and Linux, modify the ACPI device power management
code to follow the new specification.  Add comments explaining the
code flow in some unclear places.

This only may affect some real corner cases in which the OS behavior
expected by the firmware is different from the Windows one, but that's
quite unlikely.  The transition ordering change affects transitions
to D1 and D2 which are rarely used (if at all) and into D3hot and
D3cold for devices actually having _PR3, but those are likely to
be validated against Windows anyway.  The other changes may affect
code calling acpi_device_get_power() or acpi_device_update_power()
where ACPI_STATE_D3_HOT may be returned instead of ACPI_STATE_D3_COLD
(that's why the ACPI fan driver needs to be updated too) and since
transitions into ACPI_STATE_D3_HOT may remove power now, it is better
to avoid this one in acpi_pm_device_sleep_state() if the "no power
off" PM QoS flag is set.

The only existing user of acpi_device_can_poweroff() really cares
about the case when _PR3 is present, so the change in that function
should not cause any problems to happen too.

A plus is that PCI_D3hot can be mapped to ACPI_STATE_D3_HOT
now and the compatibility with older systems should be covered
automatically.

In any case, if any real problems result from this, it still will
be better to follow the Windows' behavior (which now is reflected
by the specification too) in general and handle the cases when it
doesn't work via quirks.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-16 01:55:35 +02:00
Rafael J. Wysocki
5c53b262c8 ACPI / property: Refine consistency check for PRP0001
Refine the check for the presence of the "compatible" property
if the PRP0001 device ID is present in the device's list of
ACPI/PNP IDs to also print the message if _DSD is missing
entirely or the format of it is incorrect.

One special case to take into accout is that the "compatible"
property need not be provided for devices having the PRP0001
device ID in their lists of ACPI/PNP IDs if they are ancestors
of PRP0001 devices with the "compatible" property present.
This is to cover heriarchies of device objects where the kernel
is only supposed to use a struct device representation for the
topmost one and the others represent, for example, functional
blocks of a composite device.

While at it, reduce the log level of the message to "info"
and reduce the log level of the "broken _DSD" message to
"debug" (noise reduction).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2015-05-05 15:43:07 +02:00
Rafael J. Wysocki
9a9ca16e7a Merge branch 'device-properties'
* device-properties:
  device property: Introduce firmware node type for platform data
  device property: Make it possible to use secondary firmware nodes
  driver core: Implement device property accessors through fwnode ones
  driver core: property: Update fwnode_property_read_string_array()
  driver core: Add comments about returning array counts
  ACPI: Introduce has_acpi_companion()
  driver core / ACPI: Represent ACPI companions using fwnode_handle
2015-04-13 00:35:54 +02:00
Adrian Hunter
359597cb37 ACPI: Add acpi_device_uid() for convenience
Add a nicer way to get the ACPI _UID.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-18 02:05:20 +01:00
Rafael J. Wysocki
ce793486e2 driver core / ACPI: Represent ACPI companions using fwnode_handle
Now that we have struct fwnode_handle, we can use that to point to
ACPI companions from struct device objects instead of pointing to
struct acpi_device directly.

There are two benefits from that.  First, the somewhat ugly and
hackish struct acpi_dev_node can be dropped and, second, the same
struct fwnode_handle pointer can be used in the future to point
to other (non-ACPI) firmware device node types.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
2015-03-16 23:49:03 +01:00
Rafael J. Wysocki
be10f60d29 Merge branches 'acpi-scan', 'acpi-utils' and 'acpi-pm'
* acpi-scan:
  ACPI / scan: Change the level of _DEP-related messages to KERN_DEBUG

* acpi-utils:
  ACPI / utils: Drop error messages from acpi_evaluate_reference()

* acpi-pm:
  ACPI / PM: Do not disable wakeup GPEs that have not been enabled
2014-12-18 18:42:56 +01:00
Rafael J. Wysocki
175f8e2650 ACPI / PM: Do not disable wakeup GPEs that have not been enabled
In some cases acpi_device_wakeup() may be called to ensure wakeup
power to be off for a given device even though that device's wakeup
GPE has not been enabled so far.  It calls acpi_disable_gpe() on a
GPE that's not enabled and this causes ACPICA to return the AE_LIMIT
status code from that call which then is reported as an error by the
ACPICA's debug facilities (if enabled).  This may lead to a fair
amount of confusion, so introduce a new ACPI device wakeup flag
to store the wakeup GPE status and avoid disabling wakeup GPEs
that have not been enabled.

Reported-and-tested-by: Venkat Raghavulu <venkat.raghavulu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-12 22:51:58 +01:00
Rafael J. Wysocki
e3d857e1ae Merge branch 'pm-runtime'
* pm-runtime: (25 commits)
  i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c
  dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME
  MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  hwrandom / exynos / PM: Use CONFIG_PM in #ifdef
  block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  USB / PM: Drop CONFIG_PM_RUNTIME from the USB core
  PM: Merge the SET*_RUNTIME_PM_OPS() macros
  PM / Kconfig: Do not select PM directly from Kconfig files
  PCI / PM: Drop CONFIG_PM_RUNTIME from the PCI core
  ...
2014-12-08 20:00:44 +01:00
Rafael J. Wysocki
69bad361e6 Merge branches 'acpi-scan', 'acpi-pm', 'acpi-lpss' and 'acpi-processor'
* acpi-scan:
  ACPI: Add _DEP support to fix battery issue on Asus T100TA

* acpi-pm:
  ACPI / sleep: Drain outstanding events after disabling multiple GPEs
  ACPI / PM: Fixed a typo in a comment

* acpi-lpss:
  dmaengine: dw: enable runtime PM
  ACPI / LPSS: introduce a 'proxy' device to power on LPSS for DMA
  ACPI / LPSS: allow to use specific PM domain during ->probe()
  ACPI / LPSS: add all LPSS devices to the specific power domain

* acpi-processor:
  ACPI / cpuidle: avoid assigning signed errno to acpi_status
  ACPI / processor: remove unused variabled from acpi_processor_power structure
  ACPI / processor: Update the comments in processor.h
2014-12-08 19:52:16 +01:00
Rafael J. Wysocki
5de21bb998 ACPI / PM: Drop CONFIG_PM_RUNTIME from the ACPI core
After commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so quite a few
depend on CONFIG_PM.

Replace CONFIG_PM_RUNTIME with CONFIG_PM in the ACPI core code.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-04 00:50:19 +01:00
Lan Tianyu
40e7fcb192 ACPI: Add _DEP support to fix battery issue on Asus T100TA
ACPI 5.0 introduces _DEP (Operation Region Dependencies) to designate
device objects that OSPM should assign a higher priority in start
ordering due to future operation region accesses.

On Asus T100TA, ACPI battery info are read from a I2C slave device via
I2C operation region. Before I2C operation region handler is installed,
battery _STA always returns 0. There is a _DEP method of designating
start order under battery device node.

This patch is to implement _DEP feature to fix battery issue on the
Asus T100TA.  Introducing acpi_dep_list and adding dep_unmet count
in struct acpi_device. During ACPI namespace scan, create struct
acpi_dep_data for a valid pair of master (device pointed to by _DEP)/
slave(device with _DEP), record master's and slave's ACPI handle in
it and put it into acpi_dep_list. The dep_unmet count will increase
by one if there is a device under its _DEP. Driver's probe() should
return EPROBE_DEFER when find dep_unmet is larger than 0. When I2C
operation region handler is installed, remove all struct acpi_dep_data
on the acpi_dep_list whose master is pointed to I2C host controller
and decrease slave's dep_unmet. When dep_unmet decreases to 0, all
_DEP conditions are met and then do acpi_bus_attach() for the device
in order to resolve battery _STA issue on the Asus T100TA.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=69011
Tested-by: Jan-Michael Brummer <jan.brummer@tabos.org>
Tested-by: Adam Williamson <adamw@happyassassin.net>
Tested-by: Michael Shigorin <shigorin@gmail.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-24 01:04:55 +01:00
Rafael J. Wysocki
f028d5242d ACPI / GPIO: Driver GPIO mappings for ACPI GPIOs
Provide a way for device drivers using GPIOs described by ACPI
GpioIo resources in _CRS to tell the GPIO subsystem what names
(connection IDs) to associate with specific GPIO pins defined
in there.

To do that, a driver needs to define a mapping table as a
NULL-terminated array of struct acpi_gpio_mapping objects
that each contain a name, a pointer to an array of line data
(struct acpi_gpio_params) objects and the size of that array.

Each struct acpi_gpio_params object consists of three fields,
crs_entry_index, line_index, active_low, representing the index of
the target GpioIo()/GpioInt() resource in _CRS starting from zero,
the index of the target line in that resource starting from zero,
and the active-low flag for that line, respectively.

Next, the mapping table needs to be passed as the second
argument to acpi_dev_add_driver_gpios() that will register it with
the ACPI device object pointed to by its first argument.  That
should be done in the driver's .probe() routine.

On removal, the driver should unregister its GPIO mapping table
by calling acpi_dev_remove_driver_gpios() on the ACPI device
object where that table was previously registered.

Included are fixes from Mika Westerberg.

Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04 21:58:24 +01:00
Rafael J. Wysocki
8a0662d9ed Driver core: Unified interface for firmware node properties
Add new generic routines are provided for retrieving properties from
device description objects in the platform firmware in case there are
no struct device objects for them (either those objects have not been
created yet or they do not exist at all).

The following functions are provided:

fwnode_property_present()
fwnode_property_read_u8()
fwnode_property_read_u16()
fwnode_property_read_u32()
fwnode_property_read_u64()
fwnode_property_read_string()
fwnode_property_read_u8_array()
fwnode_property_read_u16_array()
fwnode_property_read_u32_array()
fwnode_property_read_u64_array()
fwnode_property_read_string_array()

in analogy with the corresponding functions for struct device added
previously.  For all of them, the first argument is a pointer to struct
fwnode_handle (new type) that allows a device description object
(depending on what platform firmware interface is in use) to be
obtained.

Add a new macro device_for_each_child_node() for iterating over the
children of the device description object associated with a given
device and a new function device_get_child_node_count() returning the
number of a given device's child nodes.

The interface covers both ACPI and Device Trees.

Suggested-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04 21:58:23 +01:00
Mika Westerberg
733e625139 ACPI: Allow drivers to match using Device Tree compatible property
We have lots of existing Device Tree enabled drivers and allocating
separate _HID for each is not feasible. Instead we allocate special _HID
"PRP0001" that means that the match should be done using Device Tree
compatible property using driver's .of_match_table instead if the driver
is missing .acpi_match_table.

If there is a need to distinguish from where the device is enumerated
(DT/ACPI) driver can check dev->of_node or ACPI_COMPATION(dev).

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04 21:58:21 +01:00
Mika Westerberg
ffdcd955c3 ACPI: Add support for device specific properties
Device Tree is used in many embedded systems to describe the system
configuration to the OS. It supports attaching properties or name-value
pairs to the devices it describe. With these properties one can pass
additional information to the drivers that would not be available
otherwise.

ACPI is another configuration mechanism (among other things) typically
seen, but not limited to, x86 machines. ACPI allows passing arbitrary
data from methods but there has not been mechanism equivalent to Device
Tree until the introduction of _DSD in the recent publication of the
ACPI 5.1 specification.

In order to facilitate ACPI usage in systems where Device Tree is
typically used, it would be beneficial to standardize a way to retrieve
Device Tree style properties from ACPI devices, which is what we do in
this patch.

If a given device described in ACPI namespace wants to export properties it
must implement _DSD method (Device Specific Data, introduced with ACPI 5.1)
that returns the properties in a package of packages. For example:

	Name (_DSD, Package () {
		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
		Package () {
			Package () {"name1", <VALUE1>},
			Package () {"name2", <VALUE2>},
			...
		}
	})

The UUID reserved for properties is daffd814-6eba-4d8c-8a91-bc9bbf4aa301
and is documented in the ACPI 5.1 companion document called "_DSD
Implementation Guide" [1], [2].

We add several helper functions that can be used to extract these
properties and convert them to different Linux data types.

The ultimate goal is that we only have one device property API that
retrieves the requested properties from Device Tree or from ACPI
transparent to the caller.

[1] http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel.htm
[2] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf

Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04 21:58:21 +01:00
Linus Torvalds
8264fce6de Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
 "Sorry that I missed the merge window as there is a bug found in the
  last minute, and I have to fix it and wait for the code to be tested
  in linux-next tree for a few days.  Now the buggy patch has been
  dropped entirely from my next branch.  Thus I hope those changes can
  still be merged in 3.18-rc2 as most of them are platform thermal
  driver changes.

  Specifics:

   - introduce ACPI INT340X thermal drivers.

     Newer laptops and tablets may have thermal sensors and other
     devices with thermal control capabilities that are exposed for the
     OS to use via the ACPI INT340x device objects.  Several drivers are
     introduced to expose the temperature information and cooling
     ability from these objects to user-space via the normal thermal
     framework.

     From: Lu Aaron, Lan Tianyu, Jacob Pan and Zhang Rui.

   - introduce a new thermal governor, which just uses a hysteresis to
     switch abruptly on/off a cooling device.  This governor can be used
     to control certain fan devices that can not be throttled but just
     switched on or off.  From: Peter Feuerer.

   - introduce support for some new thermal interrupt functions on
     i.MX6SX, in IMX thermal driver.  From: Anson, Huang.

   - introduce tracing support on thermal framework.  From: Punit
     Agrawal.

   - small fixes in OF thermal and thermal step_wise governor"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits)
  Thermal: int340x thermal: select ACPI fan driver
  Thermal: int3400_thermal: use acpi_thermal_rel parsing APIs
  Thermal: int340x_thermal: expose acpi thermal relationship tables
  Thermal: introduce int3403 thermal driver
  Thermal: introduce INT3402 thermal driver
  Thermal: move the KELVIN_TO_MILLICELSIUS macro to thermal.h
  ACPI / Fan: support INT3404 thermal device
  ACPI / Fan: add ACPI 4.0 style fan support
  ACPI / fan: convert to platform driver
  ACPI / fan: use acpi_device_xxx_power instead of acpi_bus equivelant
  ACPI / fan: remove no need check for device pointer
  ACPI / fan: remove unused macro
  Thermal: int3400 thermal: register to thermal framework
  Thermal: int3400 thermal: add capability to detect supporting UUIDs
  Thermal: introduce int3400 thermal driver
  ACPI: add ACPI_TYPE_LOCAL_REFERENCE support to acpi_extract_package()
  ACPI: make acpi_create_platform_device() an external API
  thermal: step_wise: fix: Prevent from binary overflow when trend is dropping
  ACPI: introduce ACPI int340x thermal scan handler
  thermal: Added Bang-bang thermal governor
  ...
2014-10-24 11:21:43 -07:00
Aaron Lu
2bb3a2bf99 ACPI / fan: use acpi_device_xxx_power instead of acpi_bus equivelant
When we have the acpi_device pointer, there is no need to pass the
device's handle to the acpi_bus_xxx_power functions to get/set/update
the device's power state, instead, use the acpi_device_xxx_power
functions directly.

To make this happen for fan module, export acpi_device_update_power.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-10-10 13:57:12 +08:00
Rafael J. Wysocki
9ef5a306ef Merge branches 'acpi-hotplug', 'acpi-scan', 'acpi-lpss', 'acpi-gpio' and 'acpi-video'
* acpi-hotplug:
  ACPI / hotplug: Generate online uevents for ACPI containers

* acpi-scan:
  ACPI / scan: Correct error return value of create_modalias()

* acpi-lpss:
  ACPI / platform / LPSS: disable async suspend/resume of LPSS devices

* acpi-gpio:
  gpio / ACPI: Use pin index and bit length
  ACPICA: Update to GPIO region handler interface.

* acpi-video:
  ACPI / video: disable native backlight for ThinkPad X201s
2014-09-25 22:59:30 +02:00
Rafael J. Wysocki
8ab17fc92e ACPI / hotplug: Generate online uevents for ACPI containers
Commit 46394fd01 (ACPI / hotplug: Move container-specific code out of
the core) removed the generation of "online" uevents for containers,
because "add" uevents are now generated for them automatically when
container system devices are registered.  However, there are user
space tools that need to be notified when the container and all of
its children have been enumerated, which doesn't happen any more.

For this reason, add a mechanism allowing "online" uevents to be
generated for ACPI containers after enumerating the container along
with all of its children.

Fixes: 46394fd01 (ACPI / hotplug: Move container-specific code out of the core)
Reported-and-tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-21 02:58:18 +02:00
Linus Torvalds
b29f83aa8b PCI updates for v3.17:
Enumeration
     - Don't default exclusively to first video device (Bruno Prémont)
 
   PCI device hotplug
     - Remove "no hotplug settings from platform" warning (Bjorn Helgaas)
     - Add pci_ignore_hotplug() for VGA switcheroo (Bjorn Helgaas)
 
   Freescale i.MX6
     - Put LTSSM in "Detect" state before disabling (Lucas Stach)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUG7o9AAoJEFmIoMA60/r8hbYP/3gR3xHd2QKpkmBcM1lf1yiR
 osQQnAfRqEO4fzrpmOYrYbLIAOPwanK6Y36rmIYB+wHU2SUaffV7ZI9uW32shTud
 09+1N+OrSS6fwzVUWOuKsf1kv/jxpS+ic2fb+Qe1OXwJh5G+z1D9Kvd2EPLJdlgK
 ySyX4zSTrLni8CoclzREO7u82VVO5rTdvbujBxuvpOQTOdD5TFqV/uhb/y3gQz+u
 sG6IxUbdXsy4r24C6OnPrmmZ1Rk/lgCMyA+QSozc5Eu5PdGzcY9a6gcKlTnsbwBs
 qYLAb+/KCa3KgQh07NYmFfYdpoMZUXgSsEtD8gyvfJQHwUYwW8rsEMKxlSCQrzYr
 0OrpBSVTO6ta1r8SKOWtSYETQgPE3GUiJR1DuCyV+55RLZYp6Q8zH6dbgfWQbA/g
 R/kWHihR/tcD9YIlT99QrBppZtvG5nZ3y7aLSqdYYxEJqHE0tlbuxAu8hgwDf3Qp
 lKZJMyadLB1MS9lnrMj8DYqIOKbe62LOwcEYzhMJzaq8vCy+JWtjxOOgwBkT7P5v
 bhhYh3eqi5/MBONtw52V6RDUQId9vOLGHoiM5/akG4FFmWdhO9S0SbMBhAJyazKT
 n3IP5yj657XAi/fK939PUCQ3YuT5GqlCNcXDCqUzBZhGnt/Ln7LPmQI323519Lp4
 3vI3irFT0Fu2IFEBhc6l
 =xIYe
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:
 "These fix:

   - Boot video device detection on dual-GPU Apple systems
   - Hotplug fiascos on VGA switcheroo with radeon & nouveau drivers
   - Boot hang on Freescale i.MX6 systems
   - Excessive "no hotplug settings from platform" warnings

  In particular:

  Enumeration
    - Don't default exclusively to first video device (Bruno Prémont)

  PCI device hotplug
    - Remove "no hotplug settings from platform" warning (Bjorn Helgaas)
    - Add pci_ignore_hotplug() for VGA switcheroo (Bjorn Helgaas)

  Freescale i.MX6
    - Put LTSSM in "Detect" state before disabling (Lucas Stach)"

* tag 'pci-v3.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  vgaarb: Drop obsolete #ifndef
  vgaarb: Don't default exclusively to first video device with mem+io
  ACPIPHP / radeon / nouveau: Remove acpi_bus_no_hotplug()
  PCI: Remove "no hotplug settings from platform" warning
  PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device
  PCI: imx6: Put LTSSM in "Detect" state before disabling it
  MAINTAINERS: Add Lucas Stach as co-maintainer for i.MX6 PCI driver
2014-09-19 10:50:30 -07:00
Bjorn Helgaas
f91ce35e47 ACPIPHP / radeon / nouveau: Remove acpi_bus_no_hotplug()
Revert parts of f244d8b623 ("ACPIPHP / radeon / nouveau: Fix VGA
switcheroo problem related to hotplug").

A previous commit 5493b31f0b55 ("PCI: Add pci_ignore_hotplug() to ignore
hotplug events for a device") added equivalent functionality implemented in
a different way for both acpiphp and pciehp.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Rajat Jain <rajatxjain@gmail.com>
2014-09-15 13:15:34 -06:00
Yasuaki Ishimatsu
a383b68d9f ACPI / scan: not cache _SUN value in struct acpi_device_pnp
The _SUN device indentification object is not guaranteed to return
the same value every time it is executed, so we should not cache its
return value, but rather execute it every time as needed.  If it is
cached, an incorrect stale value may be used in some situations.

This issue was exposed by commit 202317a573 (ACPI / scan: Add
acpi_device objects for all device nodes in the namespace).  Fix it
by avoiding to cache the return value of _SUN.

Fixes: 202317a573 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace)
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-03 22:41:14 +02:00
Rafael J. Wysocki
e5e0243e36 Merge branches 'acpi-video' and 'acpi-hotplug'
* acpi-video:
  ACPI: move models with win8 brightness problems from win8 blacklist to use_native_backlight
  ACPI / video: Fix backlight taking 2 steps on a brightness up/down keypress

* acpi-hotplug:
  ACPI / hotplug / PCI: Fix sparse non static symbol warning
  ACPI / hotplug: Simplify acpi_set_hp_context()
  ACPI / hotplug / PCI: Eliminate acpiphp_dev_to_bridge()
2014-07-27 23:55:54 +02:00
Rafael J. Wysocki
91af125c33 Merge branches 'acpi-pnp' and 'acpi-pci'
* acpi-pnp:
  ACPI / PNP: Use ACPI_COMPANION() instead of ACPI_HANDLE()
  ACPI / PNP: do ACPI binding directly

* acpi-pci:
  ACPI / PCI: Use ACPI_COMPANION() instead of ACPI_HANDLE()
2014-07-27 23:55:35 +02:00
Rafael J. Wysocki
f35cec2555 ACPI / PM: Always enable wakeup GPEs when enabling device wakeup
Wakeup GPEs are currently only enabled when setting up devices for
remote wakeup at run time.  During system-wide transitions they are
enabled by ACPICA at the very last stage of suspend (before asking
the BIOS to take over).  Of course, that only works for system
sleep states supported by ACPI, so in particular it doesn't work
for the "freeze" sleep state.

For this reason, modify the ACPI core device PM code to enable wakeup
GPEs for devices when setting them up for wakeup regardless of whether
that is remote wakeup at runtime or system wakeup.  That allows the
same device wakeup setup routine to be used for both runtime PM and
system-wide PM and makes it possible to reduce code size quite a bit.

This make ACPI-based PCI Wake-on-LAN work with the "freeze" sleep
state on my venerable Toshiba Portege R500 and should help other
systems too.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-23 01:00:53 +02:00
Rafael J. Wysocki
c072530f39 ACPI / PM: Revork the handling of ACPI device wakeup notifications
Since ACPI wakeup GPEs are going to be enabled during system suspend
as well as for runtime wakeup by a subsequent patch and the same
notify handlers will be used in both cases, rework the ACPI device
wakeup notification framework so that the part specific to physical
devices is always run asynchronously from the PM workqueue.  This
prevents runtime resume callbacks for those devices from being
run during system suspend and resume which may not be appropriate,
among other things.

Also make ACPI device wakeup notification handling a bit more robust
agaist subsequent removal of ACPI device objects, whould that ever
happen, and create a wakeup source object for each ACPI device
configured for wakeup so that wakeup notifications for those
devices can wake up the system from the "freeze" sleep state.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-23 01:00:45 +02:00
Rafael J. Wysocki
ba574dc856 ACPI / hotplug: Simplify acpi_set_hp_context()
Since all of the acpi_set_hp_context() callers pass at least one NULL
function pointer and one caller passes NULL function pointers only
to it, drop function pointer arguments from acpi_set_hp_context()
and make the callers initialize the function pointers in struct
acpi_hotplug_context by themselves before passing it to
acpi_set_hp_context().

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-16 01:45:40 +02:00
Zhang Rui
f1b1dc845c ACPI / PNP: do ACPI binding directly
PNPACPI uses acpi_bus_type to do ACPI binding for the PNPACPI devices.

This is overkill because PNPACPI code already knows which ACPI
device object to bind during PNPACPI device enumeration.

This patch removes acpi_pnp_bus and does the binding by invoking
acpi_bind_one() directly after device enumerated.

This also fixes a bug in the previous code that some PNPACPI devices failed
to be bound because
 1. the ACPI device _HID is not pnpid, e.g. "MSFT0001", but its _CID is,
    e.g. "PNP0303", thus ACPI _CID is used as the pnp device device id.
 2. device is bound only if the pnp device id matches the ACPI device _HID.

Tested-by: Prigent Christophe <christophe.prigent@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-07 14:07:38 +02:00