Although n_tty_check_unthrottle() has a valid ldisc reference (since
the tty core gets the ldisc ref in tty_read() before calling the line
discipline read() method), it does not have a valid ldisc reference to
the "other" pty of a pty pair. Since getting an ldisc reference for
tty->link essentially open-codes tty_wakeup(), just replace with the
equivalent tty_wakeup().
Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ioctl(TIOCGETD) retrieves the line discipline id directly from the
ldisc because the line discipline id (c_line) in termios is untrustworthy;
userspace may have set termios via ioctl(TCSETS*) without actually
changing the line discipline via ioctl(TIOCSETD).
However, directly accessing the current ldisc via tty->ldisc is
unsafe; the ldisc ptr dereferenced may be stale if the line discipline
is changing via ioctl(TIOCSETD) or hangup.
Wait for the line discipline reference (just like read() or write())
to retrieve the "current" line discipline id.
Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A small window exists where a tty reopen will observe the tty
just prior to imminent teardown (tty->count == 0); in this case, open()
returns EIO to userspace.
Instead, retry the open after checking for signals and yielding;
this interruptible retry loop allows teardown to commence and initialize
a new tty on retry. Never retry the BSD master pty reopen; there is no
guarantee the pty pair teardown is imminent since the slave file
descriptors may remain open indefinitely.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Cc: stable <stable@vger.kernel.org> # 4.4
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow a signal to interrupt the wait for a tty reopen; eg., if
the tty has starting final close and is waiting for the device to
drain.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Cc: stable <stable@vger.kernel.org> # 4.4
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the build of PCM timer may be disabled via Kconfig now, each
driver that provides a timer interface needs to set CONFIG_SND_TIMER
explicitly. Otherwise it may get a build error due to missing
symbol.
Fixes: 90bbaf66ee ('ALSA: timer: add config item to export PCM timer disabling for expert')
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Runtime suspend during driver probe and removal can cause problems.
The driver's runtime_suspend or runtime_resume callbacks may invoked
before the driver has finished binding to the device or after the
driver has unbound from the device.
This problem shows up with the sd and sr drivers, and can cause disk
or CD/DVD drives to become unusable as a result. The fix is simple.
The drivers store a pointer to the scsi_disk or scsi_cd structure as
their private device data when probing is finished, so we simply have
to be sure to clear the private data during removal and test it during
runtime suspend/resume.
This fixes <https://bugs.debian.org/801925>.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Paul Menzel <paul.menzel@giantmonkey.de>
Reported-by: Erich Schubert <erich@debian.org>
Reported-by: Alexandre Rossi <alexandre.rossi@gmail.com>
Tested-by: Paul Menzel <paul.menzel@giantmonkey.de>
Tested-by: Erich Schubert <erich@debian.org>
CC: <stable@vger.kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
In eeh_pe_loc_get(), the PE location code is retrieved from the
"ibm,loc-code" property of the device node for the bridge of the
PE's primary bus. It's not correct because the property indicates
the parent PE's location code.
This reads the correct PE location code from "ibm,io-base-loc-code"
or "ibm,slot-location-code" property of PE parent bus's device node.
Cc: stable@vger.kernel.org # v3.16+
Fixes: 357b2f3dd9 ("powerpc/eeh: Dump PE location code")
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Tested-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Building with CONFIG_CC_STACKPROTECTOR_STRONG triggers protection code
generation under CONFIG_ARM_ATAG_DTB_COMPAT but this is too early for
being able to use any of the stack_chk code. Explicitly disable it for
only the atags_to_fdt bits.
Suggested-by: zhxihu <zhxihu@marvell.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
For PAE kernels "unsigned long" is not suitable to hold page protection
flags, since _PAGE_NX doesn't fit there. This is the reason for quite a
few W+X pages getting reported as insecure during boot (observed namely
for the entire initrd range).
Fixes: 281d4078be ("x86: Make page cache mode a real type")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <JGross@suse.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/56A7635602000078000CAFF1@prv-mh.provo.novell.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When trying to get the vmap address of an imported buffer, we must
call into the appropriate helper function, to allow the exporter to
establish the vmap, instead of trying to vmap the buffer on our own.
Add an indirection through etnaviv_gem_ops to allow the correct
implementation to be called.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This function follows the semantics of vmap() by returning
NULL in case of an error. To make things less confusing
rename it to make make both functions more closely related.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
In case that etnaviv_gem_get_pages is unable to get the required
pages the object mutex needs to be unlocked. Also return NULL in
this case instead of propagating the error, as callers of this
function might not be prepared to handle a pointer error, but
expect this call to follow the semantics of a plain vmap to return
NULL in case of an error.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Export further minor feature bitmasks and the varyings count from
the GPU specifications registers to userspace.
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Add and use a helper for comparing the model and revision IDs.
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Add a helper to extract etnaviv bitfields from register values.
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Use the defined constants in common.xml.h for the chip model rather
than coding these as hex numbers.
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Update the common and state_hi xml.h header files from the etnaviv
repository.
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Ignore GPUs with a 2.0 front end. These have a different register
layout for the front end, which provokes imprecise aborts from the
register accesses in the 'gpu' debugfs file.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Since b8b2c7d845, platform_drv_probe() is called for all platform
devices. If drv->probe is NULL, and dev_pm_domain_attach() fails,
platform_drv_probe() will return the error code from dev_pm_domain_attach().
This causes real_probe() to enter the "probe_failed" path and set
dev->driver to NULL. Before b8b2c7d845, real_probe() would assume
success if both dev->bus->probe and drv->probe were missing. As a result,
a device and driver could be "bound" together just by matching their names;
this doesn't work any more after b8b2c7d845.
This may cause problems later for certain usage of platform_driver_register()
and platform_device_register_simple(). I observed a panic while loading
the tpm_tis driver with parameter "force=1" (i.e. registering tpm_tis as
a platform driver), because tpm_tis_init's assumption that the device
returned by platform_device_register_simple() was bound didn't hold any more
(tpmm_chip_alloc() dereferences chip->pdev->driver, causing panic).
This patch restores the previous (4.3.0 and earlier) behavior of
platform_drv_probe() in the case when the associated platform driver has
no "probe" function.
Fixes: b8b2c7d845 ("base/platform: assert that dev_pm_domain callbacks are called unconditionally")
Signed-off-by: Martin Wilck <Martin.Wilck@ts.fujitsu.com>
Cc: stable <stable@vger.kernel.org> # 4.4
Cc: Martin Fuzzey <mfuzzey@parkeon.com>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Calling apply_to_page_range with an empty range results in a BUG_ON
from the core code. This can be triggered by trying to load the st_drv
module with CONFIG_DEBUG_SET_MODULE_RONX enabled:
kernel BUG at mm/memory.c:1874!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 3 PID: 1764 Comm: insmod Not tainted 4.5.0-rc1+ #2
Hardware name: ARM Juno development board (r0) (DT)
task: ffffffc9763b8000 ti: ffffffc975af8000 task.ti: ffffffc975af8000
PC is at apply_to_page_range+0x2cc/0x2d0
LR is at change_memory_common+0x80/0x108
This patch fixes the issue by making change_memory_common (called by the
set_memory_* functions) a NOP when numpages == 0, therefore avoiding the
erroneous call to apply_to_page_range and bringing us into line with x86
and s390.
Cc: <stable@vger.kernel.org>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Mika Penttilä <mika.penttila@nextfour.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When the programming of a GITS_BASERn register fails because of
an unsupported ITS page size, we retry it with a smaller page size.
Unfortunately, we don't recompute the number of allocated ITS pages,
indicating the wrong value computed in the original allocation.
A convenient fix is to free the pages we allocated, update the
page size, and restart the allocation. This will ensure that
we always allocate the right amount in the case of a device
table, specially if we have to reduce the allocation order
to stay within the boundaries of the ITS maximum allocation.
Reported-and-tested-by: Ma Jun <majun258@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1453818255-1289-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The new function platform_msi_domain_{alloc,free}_irqs are meant to be
used in platform drivers, which can be built as modules. Therefore, it
makes sense to export them to be used from kernel modules.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Link: http://lkml.kernel.org/r/1453816347-32720-4-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The KVM_SMI capability is following the KVM_S390_SET_IRQ_STATE capability
which is "4.95", this changes the number of the KVM_SMI chapter to 4.96.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Tegra clocksource implementation uses the clocksource_mmio helper
functions, but currently can be configured without them, which fails:
drivers/clocksource/built-in.o: In function `tegra20_init_timer':
:(.init.text+0xac): undefined reference to `clocksource_mmio_init'
:(.init.text+0x140): undefined reference to `clocksource_mmio_readl_up'
The same problem exists for Digicolor:
drivers/clocksource/built-in.o: In function `digicolor_timer_init':
:(.init.text+0xfa): undefined reference to `clocksource_mmio_init'
:(.init.text+0x14c): undefined reference to `clocksource_mmio_readl_down'
I've inspected the Kconfig file to look for other cases that I have not
yet run into, and added an explicit 'select' to each one to ensure we
can successfully link the drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: http://lkml.kernel.org/r/1453737776-1960372-1-git-send-email-arnd@arndb.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
A couple of functions in kernel/time/tick-sched.c are only
relevant for oneshot timer mode, i.e. when hires-timers or
nohz mode are enabled. If both are disabled, we get gcc warnings
about them:
kernel/time/tick-sched.c:98:16: warning: 'tick_init_jiffy_update' defined but not used [-Wunused-function]
static ktime_t tick_init_jiffy_update(void)
^
kernel/time/tick-sched.c:112:13: warning: 'tick_sched_do_timer' defined but not used [-Wunused-function]
static void tick_sched_do_timer(ktime_t now)
^
kernel/time/tick-sched.c:134:13: warning: 'tick_sched_handle' defined but not used [-Wunused-function]
static void tick_sched_handle(struct tick_sched *ts, struct pt_regs *regs)
^
This encloses the whole set of functions in an appropriate ifdef
to avoid the warning and to make it clearer when they are used.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1453736525-1959191-1-git-send-email-arnd@arndb.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add some simple tests to check both valid and invalid
offsets when using adjtimex's ADJ_SETOFFSET method.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Harald Hoyer <harald@redhat.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: David Herrmann <dh.herrmann@gmail.com>
Link: http://lkml.kernel.org/r/1453417415-19110-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
So far, when trying to associate a device with its MSI domain,
we first lookup the domain using a MSI token, and if this
doesn't return anything useful, we pick up any domain matching
the same node.
This logic is broken for two reasons:
1) Only the generic MSI code (PCI or platform) sets this token
to PCI/MSI or platform MSI. So we're guaranteed that if there
is something to be found, we will find it with the first call.
2) If we have a convoluted situation where:
- a single node implements both wired and MSI interrupts
- MSI support for that HW hasn't been compiled in
we'll end up using the wired domain for MSIs anyway, and things
break badly.
So let's just remove __of_get_msi_domain, and replace it by a direct
call to irq_find_matching_host, because that's what we really want.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Rob Herring <robh+dt@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Link: http://lkml.kernel.org/r/1453816347-32720-3-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Let's take the (outlandish) example of an interrupt controller
capable of handling both wired interrupts and PCI MSIs.
With the current code, the PCI MSI domain is going to be tagged
with DOMAIN_BUS_PCI_MSI, and the wired domain with DOMAIN_BUS_ANY.
Things get hairy when we start looking up the domain for a wired
interrupt (typically when creating it based on some firmware
information - DT or ACPI).
In irq_create_fwspec_mapping(), we perform the lookup using
DOMAIN_BUS_ANY, which is actually used as a wildcard. This gives
us one chance out of two to end up with the wrong domain, and
we try to configure a wired interrupt with the MSI domain.
Everything grinds to a halt pretty quickly.
What we really need to do is to start looking for a domain that
would uniquely identify a wired interrupt domain, and only use
DOMAIN_BUS_ANY as a fallback.
In order to solve this, let's introduce a new DOMAIN_BUS_WIRED
token, which is going to be used exactly as described above.
Of course, this depends on the irqchip to setup the domain
bus_token, and nobody had to implement this so far.
Only so far.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Link: http://lkml.kernel.org/r/1453816347-32720-2-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The init_eint array in the s3c24xx irqchip driver is used by
every individual chip variant, but Kconfig allows building
the driver when they are all disabled, and that leads to
a harmless compile-time warning:
drivers/irqchip/irq-s3c24xx.c:608:28: error: 'init_eint' defined but not used [-Werror=unused-variable]
This marks the array as __maybe_unused to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1453737499-1960073-1-git-send-email-arnd@arndb.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The kernel now always uses vector registers when available, however KVM
has special logic if support is really enabled for a guest. If support
is disabled, guest_fpregs.fregs will only contain memory for the fpu.
The kernel, however, will store vector registers into that area,
resulting in crazy memory overwrites.
Simply extending that area is not enough, because the format of the
registers also changes. We would have to do additional conversions, making
the code even more complex. Therefore let's directly use one place for
the vector/fpu registers + fpc (in kvm_run). We just have to convert the
data properly when accessing it. This makes current code much easier.
Please note that vector/fpu registers are now always stored to
vcpu->run->s.regs.vrs. Although this data is visible to QEMU and
used for migration, we only guarantee valid values to user space when
KVM_SYNC_VRS is set. As that is only the case when we have vector
register support, we are on the safe side.
Fixes: b5510d9b68 ("s390/fpu: always enable the vector facility if it is available")
Cc: stable@vger.kernel.org # v4.4 d9a3a09af5 s390/kvm: remove dependency on struct save_area definition
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[adopt to d9a3a09af5]
The KVM-VFIO device is used by the QEMU VFIO device. It is used to
record the list of in-use VFIO groups so that KVM can manipulate
them.
While we don't need this on s390 currently, let's try to be like
everyone else.
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
fprs is never freed, therefore resulting in a memory leak if
kvm_vcpu_init() fails or the vcpu is destroyed.
Fixes: 9977e886cb ("s390/kernel: lazy restore fpu registers")
Cc: stable@vger.kernel.org # v4.3+
Reported-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Mel reported stddev reporting was broken due to following commit:
106a94a0f8 ("perf stat: Introduce read_counters function")
This commit merged interval and overall counters reading into single
read_counters function.
The old interval code cleaned the stddev data for some reason (it's
never displayed in interval mode) and the mentioned commit kept on
cleaning the stddev data in merged function, which resulted in the
stddev not being displayed.
Removing the wrong stddev data cleanup init_stats call.
Reported-and-Tested-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org # v4.2+
Fixes: 106a94a0f8 ("perf stat: Introduce read_counters function")
Link: http://lkml.kernel.org/r/1453290995-18485-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The issue was pointed out by gcc-6's -Wmisleading-indentation.
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: c97cf42219 ("perf top: Live TUI Annotation")
Link: http://lkml.kernel.org/r/20151214154403.GB1409@x4
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The while loop was spinning. Fix by removing a semicolon.
The issue was pointed out by gcc-6's -Wmisleading-indentation.
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 035827e9f2 ("perf tests: Add Intel CQM test")
Link: http://lkml.kernel.org/r/20151214154335.GA1409@x4
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Per channel path measurement characteristics are obtained during channel
path registration. However if some properties of a channel path change
we don't update the measurement characteristics.
Make sure to update the characteristics when we change the properties of
a channel path or receive a notification from FW about such a change.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Make sure that in all cases where we could not obtain measurement
characteristics the associated fields are set to invalid values.
Note: without this change the "shared" capability of a channel path
for which we could not obtain the measurement characteristics was
incorrectly displayed as 0 (not shared). We will now correctly
report "unknown" in this case.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Measurement characteristics are allocated during channel path
registration but not freed during deregistration. Fix this by
embedding these characteristics inside struct channel_path.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Currently, on card response failures a combination of card domain and
domain id is recorded in the kernel messages.
According to the message description only the card id will be recorded.
The domain id is not relevant, since the whole card including all domains
is set offline.
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Since each iomap_entry handles only one bar of one pci function
(even when disjunct ranges of a bar are mapped) the sanity check
in pci_iomap_range is not needed and can be removed.
Also convert the remaining BUG_ONs to WARN_ONs.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We receive special notifications from firmware when an error was detected
and a pci function became unusable. Set the error_state accordingly to give
device drivers a hint that they don't need to try error recovery.
Suggested-by: Alexander Schmidt <alexschm@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fix the check which bar space we should map to allow available bars only.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
On s390 we need to maintain a mapping between iomem addresses
and arch specific function identifiers. Currently the mapping
table is created as such that we could span the whole iomem
address space. Since we can only map each bar space from each
possible function we have an upper bound for the number of
mapping entries.
This reduces the size of the iomap from 256K to less than 4K
(using the defconfig).
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Most of the constants defined in pci_io.h depend on each other
and thus can be calculated.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
