While there is no technical reason that both nx-842.c and
nx-842-pseries.c can have the same name for the init/exit functions, it
is a bit confusing with initcall_debug. Rename the pseries specific
functions appropriately
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current documention mentions explicitly that EINVAL should be
returned if the device is not available, but nx842_OF_upd_status()
always returns 0. However, nx842_probe() specifically checks for
non-ENODEV returns from nx842_of_upd() (which in turn calls
nx842_OF_upd_status()) and emits an extra error in that case. It seems
like the proper return code of a disabled device is ENODEV.
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the necessary module device tables to the platform support to allow
for autoloading of the CCP driver. This will allow for the CCP's hwrng
support to be available without having to manually load the driver. The
module device table entry for the pci support is already present.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
dma_unmap_sg() is being called twice after completing the
task. Looks like this is a copy paste error when creating
des driver.
With this the following warn appears during boot:
[ 4.210457] ------------[ cut here ]------------
[ 4.215114] WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1080 check_unmap+0x710/0x9a0()
[ 4.222899] omap-des 480a5000.des: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x00000000ab2ce000] [size=8 bytes]
[ 4.236785] Modules linked in:
[ 4.239860] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.39-02999-g1bc045a-dirty #182
[ 4.247918] [<c001678c>] (unwind_backtrace) from [<c0012574>] (show_stack+0x10/0x14)
[ 4.255710] [<c0012574>] (show_stack) from [<c05a37e8>] (dump_stack+0x84/0xb8)
[ 4.262977] [<c05a37e8>] (dump_stack) from [<c0046464>] (warn_slowpath_common+0x68/0x8c)
[ 4.271107] [<c0046464>] (warn_slowpath_common) from [<c004651c>] (warn_slowpath_fmt+0x30/0x40)
[ 4.279854] [<c004651c>] (warn_slowpath_fmt) from [<c02d50a4>] (check_unmap+0x710/0x9a0)
[ 4.287991] [<c02d50a4>] (check_unmap) from [<c02d5478>] (debug_dma_unmap_sg+0x90/0x19c)
[ 4.296128] [<c02d5478>] (debug_dma_unmap_sg) from [<c04a77d8>] (omap_des_done_task+0x1cc/0x3e4)
[ 4.304963] [<c04a77d8>] (omap_des_done_task) from [<c004a090>] (tasklet_action+0x84/0x124)
[ 4.313370] [<c004a090>] (tasklet_action) from [<c004a4ac>] (__do_softirq+0xf0/0x20c)
[ 4.321235] [<c004a4ac>] (__do_softirq) from [<c004a840>] (irq_exit+0x98/0xec)
[ 4.328500] [<c004a840>] (irq_exit) from [<c000f9ac>] (handle_IRQ+0x50/0xb0)
[ 4.335589] [<c000f9ac>] (handle_IRQ) from [<c0008688>] (gic_handle_irq+0x28/0x5c)
Removing the duplicate call to dma_unmap_sg().
Cc: stable@vger.kernel.org
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Merge third patchbomb from Andrew Morton:
- the rest of MM
- scripts/gdb updates
- ipc/ updates
- lib/ updates
- MAINTAINERS updates
- various other misc things
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (67 commits)
genalloc: rename of_get_named_gen_pool() to of_gen_pool_get()
genalloc: rename dev_get_gen_pool() to gen_pool_get()
x86: opt into HAVE_COPY_THREAD_TLS, for both 32-bit and 64-bit
MAINTAINERS: add zpool
MAINTAINERS: BCACHE: Kent Overstreet has changed email address
MAINTAINERS: move Jens Osterkamp to CREDITS
MAINTAINERS: remove unused nbd.h pattern
MAINTAINERS: update brcm gpio filename pattern
MAINTAINERS: update brcm dts pattern
MAINTAINERS: update sound soc intel patterns
MAINTAINERS: remove website for paride
MAINTAINERS: update Emulex ocrdma email addresses
bcache: use kvfree() in various places
libcxgbi: use kvfree() in cxgbi_free_big_mem()
target: use kvfree() in session alloc and free
IB/ehca: use kvfree() in ipz_queue_{cd}tor()
drm/nouveau/gem: use kvfree() in u_free()
drm: use kvfree() in drm_free_large()
cxgb4: use kvfree() in t4_free_mem()
cxgb3: use kvfree() in cxgb_free_mem()
...
To be consistent with other kernel interface namings, rename
of_get_named_gen_pool() to of_gen_pool_get(). In the original function
name "_named" suffix references to a device tree property, which contains
a phandle to a device and the corresponding device driver is assumed to
register a gen_pool object.
Due to a weak relation and to avoid any confusion (e.g. in future
possible scenario if gen_pool objects are named) the suffix is removed.
[sfr@canb.auug.org.au: crypto/marvell/cesa - fix up for of_get_named_gen_pool() rename]
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The functions kfree() and release_firmware() test whether their argument
is NULL and then return immediately.
Thus the test around the calls is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- ACPICA update to upstream revision 20150515 including basic
support for ACPI 6 features: new ACPI tables introduced by
ACPI 6 (STAO, XENV, WPBT, NFIT, IORT), changes related to the
other tables (DTRM, FADT, LPIT, MADT), new predefined names
(_BTH, _CR3, _DSD, _LPI, _MTL, _PRR, _RDI, _RST, _TFP, _TSN),
fixes and cleanups (Bob Moore, Lv Zheng).
- ACPI device power management core code update to follow ACPI 6
which reflects the ACPI device power management implementation
in Windows (Rafael J Wysocki).
- Rework of the backlight interface selection logic to reduce the
number of kernel command line options and improve the handling
of DMI quirks that may be involved in that and to make the
code generally more straightforward (Hans de Goede).
- Fixes for the ACPI Embedded Controller (EC) driver related to
the handling of EC transactions (Lv Zheng).
- Fix for a regression related to the ACPI resources management
and resulting from a recent change of ACPI initialization code
ordering (Rafael J Wysocki).
- Fix for a system initialization regression related to ACPI
introduced during the 3.14 cycle and caused by running the
code that switches the platform over to the ACPI mode too
early in the initialization sequence (Rafael J Wysocki).
- Support for the ACPI _CCA device configuration object related
to DMA cache coherence (Suravee Suthikulpanit).
- ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).
- ACPI battery driver cleanups (Luis Henriques, Mathias Krause).
- ACPI processor driver cleanups (Hanjun Guo).
- Cleanups and documentation update related to the ACPI device
properties interface based on _DSD (Rafael J Wysocki).
- ACPI device power management fixes (Rafael J Wysocki).
- Assorted cleanups related to ACPI (Dominik Brodowski. Fabian
Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).
- Fix for a long-standing issue causing General Protection Faults
to be generated occasionally on return to user space after resume
from ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).
- Fix to make the suspend core code return -EBUSY consistently in
all cases when system suspend is aborted due to wakeup detection
(Ruchi Kandoi).
- Support for automated device wakeup IRQ handling allowing drivers
to make their PM support more starightforward (Tony Lindgren).
- New tracepoints for suspend-to-idle tracing and rework of the
prepare/complete callbacks tracing in the PM core (Todd E Brandt,
Rafael J Wysocki).
- Wakeup sources framework enhancements (Jin Qian).
- New macro for noirq system PM callbacks (Grygorii Strashko).
- Assorted cleanups related to system suspend (Rafael J Wysocki).
- cpuidle core cleanups to make the code more efficient (Rafael J
Wysocki).
- powernv/pseries cpuidle driver update (Shilpasri G Bhat).
- cpufreq core fixes related to CPU online/offline that should
reduce the overhead of these operations quite a bit, unless the
CPU in question is physically going away (Viresh Kumar, Saravana
Kannan).
- Serialization of cpufreq governor callbacks to avoid race
conditions in some cases (Viresh Kumar).
- intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
Bhargava, Joe Konno).
- cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
Holla, Felipe Balbi, Tang Yuantian).
- Assorted cleanups in cpufreq drivers and core (Shailendra Verma,
Fabian Frederick, Wang Long).
- New Device Tree bindings for representing Operating Performance
Points (Viresh Kumar).
- Updates for the common clock operations support code in the PM
core (Rajendra Nayak, Geert Uytterhoeven).
- PM domains core code update (Geert Uytterhoeven).
- Intel Knights Landing support for the RAPL (Running Average Power
Limit) power capping driver (Dasaratharaman Chandramouli).
- Fixes related to the floor frequency setting on Atom SoCs in the
RAPL power capping driver (Ajay Thomas).
- Runtime PM framework documentation update (Ben Dooks).
- cpupower tool fix (Herton R Krzesinski).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=7jTj
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"The rework of backlight interface selection API from Hans de Goede
stands out from the number of commits and the number of affected
places perspective. The cpufreq core fixes from Viresh Kumar are
quite significant too as far as the number of commits goes and because
they should reduce CPU online/offline overhead quite a bit in the
majority of cases.
From the new featues point of view, the ACPICA update (to upstream
revision 20150515) adding support for new ACPI 6 material to ACPICA is
the one that matters the most as some new significant features will be
based on it going forward. Also included is an update of the ACPI
device power management core to follow ACPI 6 (which in turn reflects
the Windows' device PM implementation), a PM core extension to support
wakeup interrupts in a more generic way and support for the ACPI _CCA
device configuration object.
The rest is mostly fixes and cleanups all over and some documentation
updates, including new DT bindings for Operating Performance Points.
There is one fix for a regression introduced in the 4.1 cycle, but it
adds quite a number of lines of code, it wasn't really ready before
Thursday and you were on vacation, so I refrained from pushing it on
the last minute for 4.1.
Specifics:
- ACPICA update to upstream revision 20150515 including basic support
for ACPI 6 features: new ACPI tables introduced by ACPI 6 (STAO,
XENV, WPBT, NFIT, IORT), changes related to the other tables (DTRM,
FADT, LPIT, MADT), new predefined names (_BTH, _CR3, _DSD, _LPI,
_MTL, _PRR, _RDI, _RST, _TFP, _TSN), fixes and cleanups (Bob Moore,
Lv Zheng).
- ACPI device power management core code update to follow ACPI 6
which reflects the ACPI device power management implementation in
Windows (Rafael J Wysocki).
- rework of the backlight interface selection logic to reduce the
number of kernel command line options and improve the handling of
DMI quirks that may be involved in that and to make the code
generally more straightforward (Hans de Goede).
- fixes for the ACPI Embedded Controller (EC) driver related to the
handling of EC transactions (Lv Zheng).
- fix for a regression related to the ACPI resources management and
resulting from a recent change of ACPI initialization code ordering
(Rafael J Wysocki).
- fix for a system initialization regression related to ACPI
introduced during the 3.14 cycle and caused by running the code
that switches the platform over to the ACPI mode too early in the
initialization sequence (Rafael J Wysocki).
- support for the ACPI _CCA device configuration object related to
DMA cache coherence (Suravee Suthikulpanit).
- ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).
- ACPI battery driver cleanups (Luis Henriques, Mathias Krause).
- ACPI processor driver cleanups (Hanjun Guo).
- cleanups and documentation update related to the ACPI device
properties interface based on _DSD (Rafael J Wysocki).
- ACPI device power management fixes (Rafael J Wysocki).
- assorted cleanups related to ACPI (Dominik Brodowski, Fabian
Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).
- fix for a long-standing issue causing General Protection Faults to
be generated occasionally on return to user space after resume from
ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).
- fix to make the suspend core code return -EBUSY consistently in all
cases when system suspend is aborted due to wakeup detection (Ruchi
Kandoi).
- support for automated device wakeup IRQ handling allowing drivers
to make their PM support more starightforward (Tony Lindgren).
- new tracepoints for suspend-to-idle tracing and rework of the
prepare/complete callbacks tracing in the PM core (Todd E Brandt,
Rafael J Wysocki).
- wakeup sources framework enhancements (Jin Qian).
- new macro for noirq system PM callbacks (Grygorii Strashko).
- assorted cleanups related to system suspend (Rafael J Wysocki).
- cpuidle core cleanups to make the code more efficient (Rafael J
Wysocki).
- powernv/pseries cpuidle driver update (Shilpasri G Bhat).
- cpufreq core fixes related to CPU online/offline that should reduce
the overhead of these operations quite a bit, unless the CPU in
question is physically going away (Viresh Kumar, Saravana Kannan).
- serialization of cpufreq governor callbacks to avoid race
conditions in some cases (Viresh Kumar).
- intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
Bhargava, Joe Konno).
- cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
Holla, Felipe Balbi, Tang Yuantian).
- assorted cleanups in cpufreq drivers and core (Shailendra Verma,
Fabian Frederick, Wang Long).
- new Device Tree bindings for representing Operating Performance
Points (Viresh Kumar).
- updates for the common clock operations support code in the PM core
(Rajendra Nayak, Geert Uytterhoeven).
- PM domains core code update (Geert Uytterhoeven).
- Intel Knights Landing support for the RAPL (Running Average Power
Limit) power capping driver (Dasaratharaman Chandramouli).
- fixes related to the floor frequency setting on Atom SoCs in the
RAPL power capping driver (Ajay Thomas).
- runtime PM framework documentation update (Ben Dooks).
- cpupower tool fix (Herton R Krzesinski)"
* tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (194 commits)
cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state
x86: Load __USER_DS into DS/ES after resume
PM / OPP: Add binding for 'opp-suspend'
PM / OPP: Allow multiple OPP tables to be passed via DT
PM / OPP: Add new bindings to address shortcomings of existing bindings
ACPI: Constify ACPI device IDs in documentation
ACPI / enumeration: Document the rules regarding the PRP0001 device ID
ACPI / video: Make acpi_video_unregister_backlight() private
acpi-video-detect: Remove old API
toshiba-acpi: Port to new backlight interface selection API
thinkpad-acpi: Port to new backlight interface selection API
sony-laptop: Port to new backlight interface selection API
samsung-laptop: Port to new backlight interface selection API
msi-wmi: Port to new backlight interface selection API
msi-laptop: Port to new backlight interface selection API
intel-oaktrail: Port to new backlight interface selection API
ideapad-laptop: Port to new backlight interface selection API
fujitsu-laptop: Port to new backlight interface selection API
eeepc-laptop: Port to new backlight interface selection API
dell-wmi: Port to new backlight interface selection API
...
Pull crypto update from Herbert Xu:
"Here is the crypto update for 4.2:
API:
- Convert RNG interface to new style.
- New AEAD interface with one SG list for AD and plain/cipher text.
All external AEAD users have been converted.
- New asymmetric key interface (akcipher).
Algorithms:
- Chacha20, Poly1305 and RFC7539 support.
- New RSA implementation.
- Jitter RNG.
- DRBG is now seeded with both /dev/random and Jitter RNG. If kernel
pool isn't ready then DRBG will be reseeded when it is.
- DRBG is now the default crypto API RNG, replacing krng.
- 842 compression (previously part of powerpc nx driver).
Drivers:
- Accelerated SHA-512 for arm64.
- New Marvell CESA driver that supports DMA and more algorithms.
- Updated powerpc nx 842 support.
- Added support for SEC1 hardware to talitos"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (292 commits)
crypto: marvell/cesa - remove COMPILE_TEST dependency
crypto: algif_aead - Temporarily disable all AEAD algorithms
crypto: af_alg - Forbid the use internal algorithms
crypto: echainiv - Only hold RNG during initialisation
crypto: seqiv - Add compatibility support without RNG
crypto: eseqiv - Offer normal cipher functionality without RNG
crypto: chainiv - Offer normal cipher functionality without RNG
crypto: user - Add CRYPTO_MSG_DELRNG
crypto: user - Move cryptouser.h to uapi
crypto: rng - Do not free default RNG when it becomes unused
crypto: skcipher - Allow givencrypt to be NULL
crypto: sahara - propagate the error on clk_disable_unprepare() failure
crypto: rsa - fix invalid select for AKCIPHER
crypto: picoxcell - Update to the current clk API
crypto: nx - Check for bogus firmware properties
crypto: marvell/cesa - add DT bindings documentation
crypto: marvell/cesa - add support for Kirkwood and Dove SoCs
crypto: marvell/cesa - add support for Orion SoCs
crypto: marvell/cesa - add allhwsupport module parameter
crypto: marvell/cesa - add support for all armada SoCs
...
Pull x86 FPU updates from Ingo Molnar:
"This tree contains two main changes:
- The big FPU code rewrite: wide reaching cleanups and reorganization
that pulls all the FPU code together into a clean base in
arch/x86/fpu/.
The resulting code is leaner and faster, and much easier to
understand. This enables future work to further simplify the FPU
code (such as removing lazy FPU restores).
By its nature these changes have a substantial regression risk: FPU
code related bugs are long lived, because races are often subtle
and bugs mask as user-space failures that are difficult to track
back to kernel side backs. I'm aware of no unfixed (or even
suspected) FPU related regression so far.
- MPX support rework/fixes. As this is still not a released CPU
feature, there were some buglets in the code - should be much more
robust now (Dave Hansen)"
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (250 commits)
x86/fpu: Fix double-increment in setup_xstate_features()
x86/mpx: Allow 32-bit binaries on 64-bit kernels again
x86/mpx: Do not count MPX VMAs as neighbors when unmapping
x86/mpx: Rewrite the unmap code
x86/mpx: Support 32-bit binaries on 64-bit kernels
x86/mpx: Use 32-bit-only cmpxchg() for 32-bit apps
x86/mpx: Introduce new 'directory entry' to 'addr' helper function
x86/mpx: Add temporary variable to reduce masking
x86: Make is_64bit_mm() widely available
x86/mpx: Trace allocation of new bounds tables
x86/mpx: Trace the attempts to find bounds tables
x86/mpx: Trace entry to bounds exception paths
x86/mpx: Trace #BR exceptions
x86/mpx: Introduce a boot-time disable flag
x86/mpx: Restrict the mmap() size check to bounds tables
x86/mpx: Remove redundant MPX_BNDCFG_ADDR_MASK
x86/mpx: Clean up the code by not passing a task pointer around when unnecessary
x86/mpx: Use the new get_xsave_field_ptr()API
x86/fpu/xstate: Wrap get_xsave_addr() to make it safer
x86/fpu/xstate: Fix up bad get_xsave_addr() assumptions
...
Pull scheduler updates from Ingo Molnar:
"The main changes are:
- lockless wakeup support for futexes and IPC message queues
(Davidlohr Bueso, Peter Zijlstra)
- Replace spinlocks with atomics in thread_group_cputimer(), to
improve scalability (Jason Low)
- NUMA balancing improvements (Rik van Riel)
- SCHED_DEADLINE improvements (Wanpeng Li)
- clean up and reorganize preemption helpers (Frederic Weisbecker)
- decouple page fault disabling machinery from the preemption
counter, to improve debuggability and robustness (David
Hildenbrand)
- SCHED_DEADLINE documentation updates (Luca Abeni)
- topology CPU masks cleanups (Bartosz Golaszewski)
- /proc/sched_debug improvements (Srikar Dronamraju)"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits)
sched/deadline: Remove needless parameter in dl_runtime_exceeded()
sched: Remove superfluous resetting of the p->dl_throttled flag
sched/deadline: Drop duplicate init_sched_dl_class() declaration
sched/deadline: Reduce rq lock contention by eliminating locking of non-feasible target
sched/deadline: Make init_sched_dl_class() __init
sched/deadline: Optimize pull_dl_task()
sched/preempt: Add static_key() to preempt_notifiers
sched/preempt: Fix preempt notifiers documentation about hlist_del() within unsafe iteration
sched/stop_machine: Fix deadlock between multiple stop_two_cpus()
sched/debug: Add sum_sleep_runtime to /proc/<pid>/sched
sched/debug: Replace vruntime with wait_sum in /proc/sched_debug
sched/debug: Properly format runnable tasks in /proc/sched_debug
sched/numa: Only consider less busy nodes as numa balancing destinations
Revert 095bebf61a ("sched/numa: Do not move past the balance point if unbalanced")
sched/fair: Prevent throttling in early pick_next_task_fair()
preempt: Reorganize the notrace definitions a bit
preempt: Use preempt_schedule_context() as the official tracing preemption point
sched: Make preempt_schedule_context() function-tracing safe
x86: Remove cpu_sibling_mask() and cpu_core_mask()
x86: Replace cpu_**_mask() with topology_**_cpumask()
...
The CESA driver calls phys_to_virt() which is not available on all
architectures.
Remove the depency on COMPILE_TEST to prevent building this driver on
non ARM architectures.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
clk_prepare_enable() may fail, so we should better check its return value
and propagate it in the case of error.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The picoXcell hardware crypto accelerator driver was using an
older version of the clk framework, and not (un)preparing the
clock before enabling/disabling it. This change uses the handy
clk_prepare_enable function to interact with the current clk
framework correctly.
Signed-off-by: Michael van der Westhuizen <michael@smart-africa.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The nx driver reads two crucial paramters from the firmware for
each crypto algorithm, the maximum SG list length and byte limit.
Unfortunately those two parameters may be bogus, or worse they
may be absent altogether. When this happens the algorithms will
still register successfully but will fail when used or tested.
This patch adds checks to report any firmware entries which are
found to be bogus, and avoid registering algorithms which have
bogus parameters. A warning is also printed when an algorithm
is not registered because of this as there may have been no firmware
entries for it at all.
Reported-by: Ondrej Moriš <omoris@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the Kirkwood and Dove SoC descriptions, and control the allhwsupport
module parameter to avoid probing the CESA IP when the old CESA driver is
enabled (unless it is explicitly requested to do so).
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the Orion SoC description, and select this implementation by default
to support non-DT probing: Orion is the only platform where non-DT boards
are declaring the CESA block.
Control the allhwsupport module parameter to avoid probing the CESA IP when
the old CESA driver is enabled (unless it is explicitly requested to do
so).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The old and new marvell CESA drivers both support Orion and Kirkwood SoCs.
Add a module parameter to choose whether these SoCs should be attached to
the new or the old driver.
The default policy is to keep attaching those IPs to the old driver if it
is enabled, until we decide the new CESA driver is stable/secure enough.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add CESA IP description for all the missing armada SoCs (XP, 375 and 38x).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for SHA256 operations.
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for MD5 operations.
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for Triple-DES operations.
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for DES operations.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CESA IP supports CPU offload through a dedicated DMA engine (TDMA)
which can control the crypto block.
When you use this mode, all the required data (operation metadata and
payload data) are transferred using DMA, and the results are retrieved
through DMA when possible (hash results are not retrieved through DMA yet),
thus reducing the involvement of the CPU and providing better performances
in most cases (for small requests, the cost of DMA preparation might
exceed the performance gain).
Note that some CESA IPs do not embed this dedicated DMA, hence the
activation of this feature on a per platform basis.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The existing mv_cesa driver supports some features of the CESA IP but is
quite limited, and reworking it to support new features (like involving the
TDMA engine to offload the CPU) is almost impossible.
This driver has been rewritten from scratch to take those new features into
account.
This commit introduce the base infrastructure allowing us to add support
for DMA optimization.
It also includes support for one hash (SHA1) and one cipher (AES)
algorithm, and enable those features on the Armada 370 SoC.
Other algorithms and platforms will be added later on.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We are about to add a new driver to support new features like using the
TDMA engine to offload the CPU.
Orion, Dove and Kirkwood platforms are already using the mv_cesa driver,
but Orion SoCs do not embed the TDMA engine, which means we will have to
differentiate them if we want to get TDMA support on Dove and Kirkwood.
In the other hand, the migration from the old driver to the new one is not
something all people are willing to do without first auditing the new
driver.
Hence we have to support the new compatible in the mv_cesa driver so that
new platforms with updated DTs can still attach their crypto engine device
to this driver.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The mv_cesa driver currently expects the SRAM memory region to be passed
as a platform device resource.
This approach implies two drawbacks:
- the DT representation is wrong
- the only one that can access the SRAM is the crypto engine
The last point is particularly annoying in some cases: for example on
armada 370, a small region of the crypto SRAM is used to implement the
cpuidle, which means you would not be able to enable both cpuidle and the
CESA driver.
To address that problem, we explicitly define the SRAM device in the DT
and then reference the sram node from the crypto engine node.
Also note that the old way of retrieving the SRAM memory region is still
supported, or in other words, backward compatibility is preserved.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Merge the mvebu/drivers branch of the arm-soc tree which contains
just a single patch bfa1ce5f38 ("bus:
mvebu-mbus: add mv_mbus_dram_info_nooverlap()") that happens to be
a prerequisite of the new marvell/cesa crypto driver.
Add support to the nx-842-pseries.c driver for running in little endian
mode.
The pSeries platform NX 842 driver currently only works as big endian.
This adds cpu_to_be*() and be*_to_cpu() in the appropriate places to
work in LE mode also.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The new aead_edesc_alloc left out the bit indicating the last
entry on the source SG list. This patch fixes it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
I incorrectly removed DESC_MAX_USED_BYTES when enlarging the size
of the shared descriptor buffers, thus making it four times larger
than what is necessary. This patch restores the division by four
calculation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- Crash in caam hash due to uninitialised buffer lengths.
- Alignment issue in caam RNG that may lead to non-random output"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: caam - fix RNG buffer cache alignment
crypto: caam - improve initalization for context state saves
This patch fixes a number of problems in crypto driver Kconfig
entries:
1. Select BLKCIPHER instead of BLKCIPHER2. The latter is internal
and should not be used outside of the crypto API itself.
2. Do not select ALGAPI unless you use a legacy type like
CRYPTO_ALG_TYPE_CIPHER.
3. Select the algorithm type that you are implementing, e.g., AEAD.
4. Do not select generic C code such as CBC/ECB unless you use them
as a fallback.
5. Remove default n since that is the default default.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The patch
crypto: caam - Add definition of rd/wr_reg64 for little endian platform
added support for little endian platforms to the CAAM driver. Namely a
write and read function for 64 bit registers.
The only user of this functions is the Job Ring driver (drivers/crypto/caam/jr.c).
It uses the functions to set the DMA addresses for the input/output rings.
However, at least in the default configuration, the least significant 32 bits are
always in the base+0x0004 address; independent of the endianness of the bytes itself.
That means the addresses do not change with the system endianness.
DMA addresses are only 32 bits wide on non-64-bit systems, writing the upper 32 bits
of this value to the register for the least significant bits results in the DMA address
being set to 0.
Fix this by always writing the registers in the same way.
Suggested-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts the caam GCM implementations to the new AEAD
interface. This is compile-tested only.
Note that all IV generation for GCM algorithms have been removed.
The reason is that the current generation uses purely random IVs
which is not appropriate for counter-based algorithms where we
first and foremost require uniqueness.
Of course there is no reason why you couldn't implement seqiv or
seqniv within caam since all they do is xor the sequence number
with a salt, but since I can't test this on actual hardware I'll
leave it alone for now.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently dma_map_sg_chained does not handle errors from the
underlying dma_map_sg calls. This patch adds rollback in case
of an error by simply calling dma_unmap_sg_chained for the ones
that we've already mapped.
All current callers ignore the return value so this should have
no impact on them.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts the nx GCM implementations to the new AEAD
interface. This is compile-tested only.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix a "Trying to vfree() nonexistent vm area" error when unloading the CAAM
controller module by providing the correct pointer value to iounmap().
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CAAM driver uses two data buffers to store data for a hashing operation,
with one buffer defined as active. This change forces switching of the
active buffer when executing a hashing operation to avoid a later DMA unmap
using the length of the opposite buffer.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The top-level CRYPTO_DEV_VMX option already depends on PPC64 so
there is no need to depend on it again at CRYPTO_DEV_VMX_ENCRYPT.
This patch also removes a redundant "default n".
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hwrng output buffers (2) are cast inside of a a struct (caam_rng_ctx)
allocated in one DMA-tagged region. While the kernel's heap allocator
should place the overall struct on a cacheline aligned boundary, the 2
buffers contained within may not necessarily align. Consenquently, the ends
of unaligned buffers may not fully flush, and if so, stale data will be left
behind, resulting in small repeating patterns.
This fix aligns the buffers inside the struct.
Note that not all of the data inside caam_rng_ctx necessarily needs to be
DMA-tagged, only the buffers themselves require this. However, a fix would
incur the expense of error-handling bloat in the case of allocation failure.
Cc: stable@vger.kernel.org
Signed-off-by: Steve Cornelius <steve.cornelius@freescale.com>
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the driver has separate logic to determine device coherency
for DT vs ACPI. This patch simplifies the code with a call to
device_dma_is_coherent().
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace the NX842_MEM_COMPRESS define with a function that returns the
specific platform driver's required working memory size.
The common nx-842.c driver refuses to load if there is no platform
driver present, so instead of defining an approximate working memory
size that's the maximum approximate size of both platform driver's
size requirements, the platform driver can directly provide its
specific, i.e. sizeof(struct nx842_workmem), size requirements which
the 842-nx crypto compression driver will use.
This saves memory by both reducing the required size of each driver
to the specific sizeof() amount, as well as using the specific loaded
platform driver's required amount, instead of the maximum of both.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the contents of the include/linux/nx842.h header file into the
drivers/crypto/nx/nx-842.h header file. Remove the nx842.h header
file and its entry in the MAINTAINERS file.
The include/linux/nx842.h header originally was there because the
crypto/842.c driver needed it to communicate with the nx-842 hw
driver. However, that crypto compression driver was moved into
the drivers/crypto/nx/ directory, and now can directly include the
nx-842.h header. Nothing else needs the public include/linux/nx842.h
header file, as all use of the nx-842 hardware driver will be through
the "842-nx" crypto compression driver, since the direct nx-842 api is
very limited in the buffer alignments and sizes that it will accept,
and the crypto compression interface handles those limitations and
allows any alignment and size buffers.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently the driver assumes that the SG list contains exactly
the number of bytes required. This assumption is incorrect.
Up until now this has been harmless. However with the new AEAD
interface this now breaks as the AD SG list contains more bytes
than just the AD.
This patch fixes this by always clamping the AD SG list by the
specified AD length.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch makes use of the new sg_nents_for_len helper to replace
the custom sg_count function.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This driver uses SZ_64K so it should include linux/sizes.h rather
than relying on others to pull it in for it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently caam assumes that the SG list contains exactly the number
of bytes required. This assumption is incorrect.
Up until now this has been harmless. However with the new AEAD
interface this now breaks as the AD SG list contains more bytes
than just the AD.
This patch fixes this by always clamping the AD SG list by the
specified AD length.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes an issue when building an internal AD representation.
We need to check assoclen and not only blindly loop over assoc sgl.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The device doensn't support the default value and will change it to 256, which
will cause performace degradation for biger packets.
Add an explicit write to set it to 1024.
Reported-by: Tianliang Wang <tianliang.wang@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reduce the nx-842 pSeries driver minimum buffer size from 128 to 8.
Also replace the single use of IO_BUFFER_ALIGN macro with the standard
and correct DDE_BUFFER_ALIGN.
The hw sometimes rejects buffers that contain padding past the end of the
8-byte aligned section where it sees the "end" marker. With the minimum
buffer size set too high, some highly compressed buffers were being padded
and the hw was incorrectly rejecting them; this sets the minimum correctly
so there will be no incorrect padding.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Scatter gather lists can be created with more available entries than are
actually used (e.g. using sg_init_table() to reserve a specific number
of sg entries, but in actuality using something less than that based on
the data length). The caller sometimes fails to mark the last entry
with sg_mark_end(). In these cases, sg_nents() will return the original
size of the sg list as opposed to the actual number of sg entries that
contain valid data.
On arm64, if the sg_nents() value is used in a call to dma_map_sg() in
this situation, then it causes a BUG_ON in lib/swiotlb.c because an
"empty" sg list entry results in dma_capable() returning false and
swiotlb trying to create a bounce buffer of size 0. This occurred in
the userspace crypto interface before being fixed by
0f477b655a ("crypto: algif - Mark sgl end at the end of data")
Protect against this by using the new sg_nents_for_len() function which
returns only the number of sg entries required to meet the desired
length and supplying that value to dma_map_sg().
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the nx-842 common driver to wait for loading of both platform
drivers, and fail loading if the platform driver pointer is not set.
Add an independent platform driver pointer, that the platform drivers
set if they find they are able to load (i.e. if they find their platform
devicetree node(s)).
The problem is currently, the main nx-842 driver will stay loaded even
if there is no platform driver and thus no possible way it can do any
compression or decompression. This allows the crypto 842-nx driver
to load even if it won't actually work. For crypto compression users
(e.g. zswap) that expect an available crypto compression driver to
actually work, this is bad. This patch fixes that, so the 842-nx crypto
compression driver won't load if it doesn't have the driver and hardware
available to perform the compression.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the length field from the ccp_sg_workarea since it is unused.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The underlying device support will set the device dma_mask pointer
if DMA is set up properly for the device. Remove the check for and
assignment of dma_mask when it is null. Instead, just error out if
the dma_set_mask_and_coherent function fails because dma_mask is null.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The mv_cesa driver does not request the CESA registers memory region.
Since we're about to add a new CESA driver, we need to make sure only one
of these drivers probe the CESA device, and requesting the registers memory
region is a good way to achieve that.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto layer already checks maxauthsize when setauthsize is
called. So there is no need to check it again within setauthsize.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We already have fpu/types.h, move i387.h to fpu/api.h.
The file name has become a misnomer anyway: it offers generic FPU APIs,
but is not limited to i387 functionality.
Reviewed-by: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
omap3 support is same as omap2, just with different IO address (specified in DT)
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since MD5 IV are now available in crypto/md5.h, use them.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the null checks for tfm, src, slen, dst, dlen; tfm will never
be null and the other fields are always expected to be set correctly.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
One mistyped description and another mistyped target were corrected.
Signed-off-by: Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Function pm_runtime_get_sync could fail and we need to check return
value to prevent kernel crash.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-change req_ctx->nbuf from u64 to unsigned int to silence checker
warnings; this is safe since nbuf value is <= HASH_MAX_BLOCK_SIZE
-remove unused value read from TALITOS_CCPSR; there is no requirement
to read upper 32b before reading lower 32b of a 64b register;
SEC RM mentions: "reads can always be done by byte, word, or dword"
-remove unused return value of sg_to_link_tbl()
-change "len" parameter of map_single_talitos_ptr() and
to_talitos_ptr_len() to unsigned int; later, cpu_to_be16 will __force
downcast the value to unsigned short without any checker warning
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Check return value of scatterlist_sg_next(), i.e. don't rely solely
on number of bytes to be processed or number of scatterlist entries.
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This reverts commit 7291a932c6.
The conversion to be16_add_cpu() is incorrect in case cryptlen is
negative due to premature (i.e. before addition / subtraction)
implicit conversion of cryptlen (int -> u16) leading to sign loss.
Cc: <stable@vger.kernel.org> # 3.10+
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: <stable@vger.kernel.org> # 3.2+
Fixes: 1d11911a8c ("crypto: talitos - fix warning: 'alg' may be used uninitialized in this function")
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The + operation has higher precedence than ?: so we need parentheses
here. Otherwise we may end up allocating a max of only one "cryptlen"
instead of two.
Fixes: 6f65f6ac5f ('crypto: talitos - implement scatter/gather copy for SEC1')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crt_aead is an internal implementation detail and must not be
used outside of the crypto API itself. This patch replaces the
unnecessary uses of crt_aead with crypto_aead_ivsize.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add crypto compression alg for 842 hardware compression and decompression,
using the alg name "842" and driver_name "842-nx".
This uses only the PowerPC coprocessor hardware for 842 compression. It
also uses the hardware for decompression, but if the hardware fails it will
fall back to the 842 software decompression library, so that decompression
never fails (for valid 842 compressed buffers). A header must be used in
most cases, due to the hardware's restrictions on the buffers being
specifically aligned and sized.
Due to the header this driver adds, compressed buffers it creates cannot be
directly passed to the 842 software library for decompression. However,
compressed buffers created by the software 842 library can be passed to
this driver for hardware 842 decompression (with the exception of buffers
containing the "short data" template, as lib/842/842.h explains).
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the pSeries NX-842 driver: do not expect incoming buffers to be
exactly page-sized; do not break up input buffers to compress smaller
blocks; do not use any internal headers in the compressed data blocks;
remove the software decompression implementation; implement the pSeries
nx842_constraints.
This changes the pSeries NX-842 driver to perform constraints-based
compression so that it only needs to compress one entire input block at a
time. This removes the need for it to split input data blocks into
multiple compressed data sections in the output buffer, and removes the
need for any extra header info in the compressed data; all that is moved
(in a later patch) into the main crypto 842 driver. Additionally, the
842 software decompression implementation is no longer needed here, as
the crypto 842 driver will use the generic software 842 decompression
function as a fallback if any hardware 842 driver fails.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add driver for NX-842 hardware on the PowerNV platform.
This allows the use of the 842 compression hardware coprocessor on
the PowerNV platform.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add "constraints" for the NX-842 driver. The constraints are used to
indicate what the current NX-842 platform driver is capable of. The
constraints tell the NX-842 user what alignment, min and max length, and
length multiple each provided buffers should conform to. These are
required because the 842 hardware requires buffers to meet specific
constraints that vary based on platform - for example, the pSeries
max length is much lower than the PowerNV max length.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add NX-842 frontend that allows using either the pSeries platform or
PowerNV platform driver (to be added by later patch) for the NX-842
hardware. Update the MAINTAINERS file to include the new filenames.
Update Kconfig files to clarify titles and descriptions, and correct
dependencies.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the entire NX-842 driver for the pSeries platform from the file
nx-842.c to nx-842-pseries.c. This is required by later patches that
add NX-842 support for the PowerNV platform.
This patch does not alter the content of the pSeries NX-842 driver at
all, it only changes the filename.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use ADF_DH895XCC_FW instead of duplicating the string "qat_895xcc.bin"
when referring to the DH895xCC firmware.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fixes from Herbert Xu:
"This push fixes a build problem with img-hash under non-standard
configurations and a serious regression with sha512_ssse3 which can
lead to boot failures"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: img-hash - CRYPTO_DEV_IMGTEC_HASH should depend on HAS_DMA
crypto: x86/sha512_ssse3 - fixup for asm function prototype change
Bug happens when a data size less than SHA block size is passed.
Since first attempt will be saved in buffer, second round attempt
get into two step to calculate op.inlen and op.outlen. The issue
resides in this step. A wrong value of op.inlen and outlen was being
calculated.
This patch fix this eliminate the nx_sha_build_sg_list, that is
useless in SHA's algorithm context. Instead we call nx_build_sg_list
directly and pass a previous calculated max_sg_len to it.
Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In NX we need to pass always a 16 multiple size nx_sg_list to
co processor. Trim function handle with this assuring all nx_sg_lists
are 16 multiple size, although data was not being considerated when
crop was done. It was causing an unalignment between size of the list
and data, corrupting csbcpb fields returning a -23 H_ST_PARM error, or
invalid operation.
This patch fix this recalculating how much data should be put back
in to_process variable what assures the size of sg_list will be
correct with size of the data.
Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If NO_DMA=y:
drivers/built-in.o: In function `img_hash_write_via_dma_stop':
img-hash.c:(.text+0xa2b822): undefined reference to `dma_unmap_sg'
drivers/built-in.o: In function `img_hash_xmit_dma':
img-hash.c:(.text+0xa2b8d8): undefined reference to `dma_map_sg'
img-hash.c:(.text+0xa2b948): undefined reference to `dma_unmap_sg'
Also move the "depends" section below the "tristate" line while we're at
it.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The caam driver includes algorithm types that it doesn't even
use, such as struct rng_alg which has recently been moved to an
internal header file and consequently broke the build of caam.
This patch removes these bogus references.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We add a specific compatible for SEC1, to handle the differences
between SEC1 and SEC2+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SEC1 bugs on 0 data hash, so we submit an already padded block representing 0 data
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SEC1 doesn't support scatter/gather, SEC1 doesn't handle link tables.
Therefore, for SEC1 we have to do it by SW. For that, we reserve
space at the end of the extended descriptor, in lieu of the space
reserved for the link tables on SEC2, and we perform sg_copy() when
preparing the descriptors
We also adapt the max buffer size which is only 32k on SEC1 while it
is 64k on SEC2+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adapts the interrupts handling and reset function for
SEC1. On SEC1, registers are almost similar to SEC2+, but bits
are sometimes located at different places. So we need to define
TALITOS1 and TALITOS2 versions of some fields, and manage according
to whether it is SEC1 or SEC2.
On SEC1, only one interrupt vector is dedicated to the SEC, so only
interrupt_4ch is needed.
On SEC1, interrupts are enabled by clearing related bits in IMR,
while on SEC2, interrupts are enabled by seting the bits in IMR.
SEC1 also performs parity verification in the DES Unit. We have
to disable this feature because the test vectors provided in
the kernel have parity errors.
In reset functions, only SEC2 supports continuation after error.
For SEC1, we have to reset in all cases.
For errors handling, SEC2+ names have been kept, but displayed
text have been amended to reflect exact meaning on SEC1.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SEC 1.0, 1.2 and 2.x+ have different EU base addresses, so we need to
define pointers for each EU in the driver private data structure.
The proper address is set by the probe function depending on the
SEC type, in order to provide access to the proper address.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SEC1 descriptor is a bit different to SEC2+ descriptor.
talitos_submit() will have to copy hdr field into hdr1 field and
send the descriptor starting at hdr1 up to next_desc.
For SEC2, it remains unchanged and next_desc is just ignored.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
talitos descriptor is slightly different for SEC1 and SEC2+, so
lets the helper function that fills the descriptor take into account
the type of SEC.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We add a new feature in the features field, to mark compatible
"fsl,sec1.0"
We also define a helper function called has_ftr_sec1() to help
functions quickly determine if they are running on SEC1 or SEC2+.
When only SEC1 or SEC2 is compiled in, has_ftr_sec1() return
trivial corresponding value. If both are compiled in, feature
field is checked.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a CONFIG option to select SEC1, SEC2+ or both.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch enhances the talitos_desc struct with fields for SEC1.
SEC1 has only one header field, and has a 'next_desc' field in
addition.
This mixed descriptor will continue to fit SEC2, and for SEC1
we will recopy hdr value into hdr1 value in talitos_submit()
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a helper function for reads and writes of the len
param of the talitos descriptor. This will help implement
SEC1 later.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
map_single_talitos_ptr() is always called with extent == 0, so lets remove this unused parameter
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
j_extent field is specific to SEC2 so we add a helper function to clear it
so that SEC1 can redefine that function as nop
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Linux CodyingStyle recommends to use short variables for local
variables. ptr is just good enough for those 3 lines functions.
It helps keep single lines shorter than 80 characters.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch refactors the handling of the input and output data that is quite
similar in several functions
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do use zero_entry value to init the descriptors ptrs to zero instead of
writing 0 in each field
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
backlog is not initialised so in the case where
cpg->eng_st != ENGINE_IDLE it is never initialised and
hence which could lead to an illegal memory dereference
in the statement:
backlog->complete(backlog, -EINPROGRESS);
Discovered with cppcheck static analsys:
[drivers/crypto/mv_cesa.c:616]:
(error) Uninitialized variable: backlog
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
functions, prompted by their mis-use in staging.
With these function removed, all cpu functions should only iterate to
nr_cpu_ids, so we finally only allocate that many bits when cpumasks
are allocated offstack.
Thanks,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VAgA
-----END PGP SIGNATURE-----
Merge tag 'cpumask-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull final removal of deprecated cpus_* cpumask functions from Rusty Russell:
"This is the final removal (after several years!) of the obsolete
cpus_* functions, prompted by their mis-use in staging.
With these function removed, all cpu functions should only iterate to
nr_cpu_ids, so we finally only allocate that many bits when cpumasks
are allocated offstack"
* tag 'cpumask-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (25 commits)
cpumask: remove __first_cpu / __next_cpu
cpumask: resurrect CPU_MASK_CPU0
linux/cpumask.h: add typechecking to cpumask_test_cpu
cpumask: only allocate nr_cpumask_bits.
Fix weird uses of num_online_cpus().
cpumask: remove deprecated functions.
mips: fix obsolete cpumask_of_cpu usage.
x86: fix more deprecated cpu function usage.
ia64: remove deprecated cpus_ usage.
powerpc: fix deprecated CPU_MASK_CPU0 usage.
CPU_MASK_ALL/CPU_MASK_NONE: remove from deprecated region.
staging/lustre/o2iblnd: Don't use cpus_weight
staging/lustre/libcfs: replace deprecated cpus_ calls with cpumask_
staging/lustre/ptlrpc: Do not use deprecated cpus_* functions
blackfin: fix up obsolete cpu function usage.
parisc: fix up obsolete cpu function usage.
tile: fix up obsolete cpu function usage.
arm64: fix up obsolete cpu function usage.
mips: fix up obsolete cpu function usage.
x86: fix up obsolete cpu function usage.
...
The AES implementation still assumes, that the hw_desc[0] has a valid
key as long as no new key needs to be set; consequentialy it always
sets the AES key header for the first descriptor and puts data into
the second one (hw_desc[1]).
Change this to only update the key in the hardware, when a new key is
to be set and use the first descriptor for data otherwise.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With commit
7e77bdebff crypto: af_alg - fix backlog handling
in place, the backlog works under all circumstances where it previously failed, atleast
for the sahara driver. Use it.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The output buffer is used for CPU access, so
the API should be dma_sync_single_for_cpu which
makes the cache line invalid in order to reload
the value in memory.
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The input buffer and output buffer are mapped for DMA transfer
in Atmel AES driver. But they are also be used by CPU when
the requested crypt length is not bigger than the threshold
value 16. The buffers will be cached in cache line when CPU
accessed them. When DMA uses the buffers again, the memory
can happened to be flushed by cache while DMA starts transfer.
So using API dma_sync_single_for_device and dma_sync_single_for_cpu
in DMA to ensure DMA coherence and CPU always access the correct
value. This fix the issue that the encrypted result periodically goes
wrong when doing performance test with OpenSSH.
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kernel will report "BUG: spinlock lockup suspected on CPU#0"
when CONFIG_DEBUG_SPINLOCK is enabled in kernel config and the
spinlock is used at the first time. It's caused by uninitialized
spinlock, so just initialize it in probe.
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kernel will report "BUG: spinlock lockup suspected on CPU#0"
when CONFIG_DEBUG_SPINLOCK is enabled in kernel config and the
spinlock is used at the first time. It's caused by uninitialized
spinlock, so just initialize it in probe.
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The maximum source and destination burst size is 16
according to the datasheet of Atmel DMA. And the value
is also checked in function at_xdmac_csize of Atmel
DMA driver. With the restrict, the value beyond maximum
value will not be processed in DMA driver, so SHA384 and
SHA512 will not work and the program will wait forever.
So here change the max burst size of all the cases to 16
in order to make SHA384 and SHA512 work and keep consistent
with DMA driver and datasheet.
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kernel will report "BUG: spinlock lockup suspected on CPU#0"
when CONFIG_DEBUG_SPINLOCK is enabled in kernel config and the
spinlock is used at the first time. It's caused by uninitialized
spinlock, so just initialize it in probe.
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Having a zero length sg doesn't mean it is the end of the sg list. This
case happens when calculating HMAC of IPSec packet.
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When a hash is requested on data bigger than the buffer allocated by the
SHA driver, the way DMA transfers are performed is quite strange:
The buffer is filled at each update request. When full, a DMA transfer
is done. On next update request, another DMA transfer is done. Then we
wait to have a full buffer (or the end of the data) to perform the dma
transfer. Such a situation lead sometimes, on SAMA5D4, to a case where
dma transfer is finished but the data ready irq never comes. Moreover
hash was incorrect in this case.
With this patch, dma transfers are only performed when the buffer is
full or when there is no more data. So it removes the transfer whose size
is equal the update size after the full buffer transmission.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add new version of atmel-sha available with SAMA5D4 devices.
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add new version of atmel-aes available with SAMA5D4 devices.
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
release_firmware was called twice on error path causing an Oops.
Reported-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ring name was allocated but never refenenced.
It was supposed to be printed out in debug output.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
kmap_atomic() gives only the page address of the input page.
Driver should take care of adding the offset of the scatterlist
within the page to the returned page address.
omap-sham driver is not adding the offset to page and directly operates
on the return vale of kmap_atomic(), because of which the following
error comes when running crypto tests:
00000000: d9 a1 1b 7c aa 90 3b aa 11 ab cb 25 00 b8 ac bf
[ 2.338169] 00000010: c1 39 cd ff 48 d0 a8 e2 2b fa 33 a1
[ 2.344008] alg: hash: Chunking test 1 failed for omap-sha256
So adding the scatterlist offset to vaddr.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ERROR:CODE_INDENT: code indent should use tabs where possible
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CHECK:COMPARISON_TO_NULL: Comparison to NULL could be written
"!device_reset_wq"
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CHECK:BIT_MACRO: Prefer using the BIT macro
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CHECK:CONCATENATED_STRING: Concatenated strings should use spaces between
elements
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cleanup code to fix the subject checkpatch warnings
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For cases where total length of an input SGs is not same as
length of the input data for encryption, omap-aes driver
crashes. This happens in the case when IPsec is trying to use
omap-aes driver.
To avoid this, we copy all the pages from the input SG list
into a contiguous buffer and prepare a single element SG list
for this buffer with length as the total bytes to crypt, which is
similar thing that is done in case of unaligned lengths.
Fixes: 6242332ff2 ("crypto: omap-aes - Add support for cases of unaligned lengths")
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
omap_sham_handle_queue() can be called as part of done_task tasklet.
During this its atomic and any calls to pm functions cannot sleep.
But there is a call to pm_runtime_get_sync() (which can sleep) in
omap_sham_handle_queue(), because of which the following appears:
" [ 116.169969] BUG: scheduling while atomic: kworker/0:2/2676/0x00000100"
Add pm_runtime_irq_safe() to avoid this.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
"hdev->req->nbytes" is an unsigned int so we so we lose the upper 3 bits
to the shift wrap bug.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
GCC complains about that %u is the wrong format string for size_t and
also that "ret" is unused.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert pr_info() and pr_err() log messages to dev_info() and dev_err(),
respectively, where able. This adds the module name and PCI B:D:F to
indicate which QAT device generated the log message. The "QAT:" is removed
from these log messages as that is now unnecessary. A few of these log
messages have additional spelling/contextual fixes.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This define is a duplicate of the one in ./include/linux/pci_ids.h
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Kconfig entry for CRYPTO_DEV_IMGTEC_HASH incorrectly selects
CRYPTO_SHA224, which does not exist (and is covered by CRYPTO_SHA256
which covers both 224 and 256). Remove it.
Also correct typo CRYPTO_ALG_API to be CRYPTO_ALGPI.
Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: James Hartley <james.hartley@imgtec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: img-hash - Add missing semicolon to fix build error
There is a missing semicolon after MODULE_DEVICE_TABLE.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds support for the Imagination Technologies hash accelerator which
provides hardware acceleration for SHA1 SHA224 SHA256 and MD5 hashes.
Signed-off-by: James Hartley <james.hartley@imgtec.com>
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: vmx - Fix assembler perl to use _GLOBAL
Rather than doing things by hand for global symbols to deal with
different calling conventions we already have a macro _GLOBAL in
Linux to handle this.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Guenter Roeck <linux@roeck-us.net>
