Those three warnings can easily solved by using :: to indicate a
code block:
./kernel/time/timer.c:1259: WARNING: Unexpected indentation.
./kernel/time/timer.c:1261: WARNING: Unexpected indentation.
./kernel/time/timer.c:1262: WARNING: Block quote ends without a blank line; unexpected unindent.
While here, align the lines at the block.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Linux Doc Mailing List <linux-doc@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/f02e6a0ce27f3b5e33415d92d07a40598904b3ee.1525684985.git.mchehab%2Bsamsung@kernel.org
On CPU hotunplug the enqueued timers of the unplugged CPU are migrated to a
live CPU. This happens from the control thread which initiated the unplug.
If the CPU on which the control thread runs came out from a longer idle
period then the base clock of that CPU might be stale because the control
thread runs prior to any event which forwards the clock.
In such a case the timers from the unplugged CPU are queued on the live CPU
based on the stale clock which can cause large delays due to increased
granularity of the outer timer wheels which are far away from base:;clock.
But there is a worse problem than that. The following sequence of events
illustrates it:
- CPU0 timer1 is queued expires = 59969 and base->clk = 59131.
The timer is queued at wheel level 2, with resulting expiry time = 60032
(due to level granularity).
- CPU1 enters idle @60007, with next timer expiry @60020.
- CPU0 is hotplugged at @60009
- CPU1 exits idle and runs the control thread which migrates the
timers from CPU0
timer1 is now queued in level 0 for immediate handling in the next
softirq because the requested expiry time 59969 is before CPU1 base->clk
60007
- CPU1 runs code which forwards the base clock which succeeds because the
next expiring timer. which was collected at idle entry time is still set
to 60020.
So it forwards beyond 60007 and therefore misses to expire the migrated
timer1. That timer gets expired when the wheel wraps around again, which
takes between 63 and 630ms depending on the HZ setting.
Address both problems by invoking forward_timer_base() for the control CPUs
timer base. All other places, which might run into a similar problem
(mod_timer()/add_timer_on()) already invoke forward_timer_base() to avoid
that.
[ tglx: Massaged comment and changelog ]
Fixes: a683f390b9 ("timers: Forward the wheel clock whenever possible")
Co-developed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: linux-arm-msm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180118115022.6368-1-clingutla@codeaurora.org
hrtimer_reprogram() is conditionally invoked from hrtimer_start_range_ns()
when hrtimer_cpu_base.hres_active is true.
In the !hres_active case there is a special condition for the nohz_active
case:
If the newly enqueued timer expires before the first expiring timer on a
remote CPU then the remote CPU needs to be notified and woken up from a
NOHZ idle sleep to take the new first expiring timer into account.
Previous changes have already established the prerequisites to make the
remote enqueue behaviour the same whether high resolution mode is active or
not:
If the to be enqueued timer expires before the first expiring timer on a
remote CPU, then it cannot be enqueued there.
This was done for the high resolution mode because there is no way to
access the remote CPU timer hardware. The same is true for NOHZ, but was
handled differently by unconditionally enqueuing the timer and waking up
the remote CPU so it can reprogram its timer. Again there is no compelling
reason for this difference.
hrtimer_check_target(), which makes the 'can remote enqueue' decision is
already unconditional, but not yet functional because nothing updates
hrtimer_cpu_base.expires_next in the !hres_active case.
To unify this the following changes are required:
1) Make the store of the new first expiry time unconditonal in
hrtimer_reprogram() and check __hrtimer_hres_active() before proceeding
to the actual hardware access. This check also lets the compiler
eliminate the rest of the function in case of CONFIG_HIGH_RES_TIMERS=n.
2) Invoke hrtimer_reprogram() unconditionally from
hrtimer_start_range_ns()
3) Remove the remote wakeup special case for the !high_res && nohz_active
case.
Confine the timers_nohz_active static key to timer.c which is the only user
now.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-21-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The hrtimer_cpu_base::migration_enable and ::nohz_active fields
were originally introduced to avoid accessing global variables
for these decisions.
Still that results in a (cache hot) load and conditional branch,
which can be avoided by using static keys.
Implement it with static keys and optimize for the most critical
case of high performance networking which tends to disable the
timer migration functionality.
No change in functionality.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1801142327490.2371@nanos
Link: https://lkml.kernel.org/r/20171221104205.7269-2-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When the timer base is checked for expired timers then the deferrable base
must be checked as well. This was missed when making the deferrable base
independent of base::nohz_active.
Fixes: ced6d5c11d ("timers: Use deferrable base independent of base::nohz_active")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Cc: rt@linutronix.de
The timer start debug function is called before the proper timer base is
set. As a consequence the trace data contains the stale CPU and flags
values.
Call the debug function after setting the new base and flags.
Fixes: 500462a9de ("timers: Switch to a non-cascading wheel")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Cc: rt@linutronix.de
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Link: https://lkml.kernel.org/r/20171222145337.792907137@linutronix.de
The timer wheel bases are not (re)initialized on CPU hotplug. That leaves
them with a potentially stale clk and next_expiry valuem, which can cause
trouble then the CPU is plugged.
Add a prepare callback which forwards the clock, sets next_expiry to far in
the future and reset the control flags to a known state.
Set base->must_forward_clk so the first timer which is queued will try to
forward the clock to current jiffies.
Fixes: 500462a9de ("timers: Switch to a non-cascading wheel")
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712272152200.2431@nanos
During boot and before base::nohz_active is set in the timer bases, deferrable
timers are enqueued into the standard timer base. This works correctly as
long as base::nohz_active is false.
Once it base::nohz_active is set and a timer which was enqueued before that
is accessed the lock selector code choses the lock of the deferred
base. This causes unlocked access to the standard base and in case the
timer is removed it does not clear the pending flag in the standard base
bitmap which causes get_next_timer_interrupt() to return bogus values.
To prevent that, the deferrable timers must be enqueued in the deferrable
base, even when base::nohz_active is not set. Those deferrable timers also
need to be expired unconditional.
Fixes: 500462a9de ("timers: Switch to a non-cascading wheel")
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Cc: rt@linutronix.de
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/r/20171222145337.633328378@linutronix.de
In preparation for removing more macros, pass the function down to the
initialization routines instead of doing it in macros.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Since all callbacks have been converted, we can switch the core
prototype to "struct timer_list *" now too.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Now that all timer callbacks are already taking their struct timer_list
pointer as the callback argument, just do this unconditionally and remove
the .data field.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Add a function, similar to mod_timer(), that will start a timer if it isn't
running and will modify it if it is running and has an expiry time longer
than the new time. If the timer is running with an expiry time that's the
same or sooner, no change is made.
The function looks like:
int timer_reduce(struct timer_list *timer, unsigned long expires);
This can be used by code such as networking code to make it easier to share
a timer for multiple timeouts. For instance, in upcoming AF_RXRPC code,
the rxrpc_call struct will maintain a number of timeouts:
unsigned long ack_at;
unsigned long resend_at;
unsigned long ping_at;
unsigned long expect_rx_by;
unsigned long expect_req_by;
unsigned long expect_term_by;
each of which is set independently of the others. With timer reduction
available, when the code needs to set one of the timeouts, it only needs to
look at that timeout and then call timer_reduce() to modify the timer,
starting it or bringing it forward if necessary. There is no need to refer
to the other timeouts to see which is earliest and no need to take any lock
other than, potentially, the timer lock inside timer_reduce().
Note, that this does not protect against concurrent invocations of any of
the timer functions.
As an example, the expect_rx_by timeout above, which terminates a call if
we don't get a packet from the server within a certain time window, would
be set something like this:
unsigned long now = jiffies;
unsigned long expect_rx_by = now + packet_receive_timeout;
WRITE_ONCE(call->expect_rx_by, expect_rx_by);
timer_reduce(&call->timer, expect_rx_by);
The timer service code (which might, say, be in a work function) would then
check all the timeouts to see which, if any, had triggered, deal with
those:
t = READ_ONCE(call->ack_at);
if (time_after_eq(now, t)) {
cmpxchg(&call->ack_at, t, now + MAX_JIFFY_OFFSET);
set_bit(RXRPC_CALL_EV_ACK, &call->events);
}
and then restart the timer if necessary by finding the soonest timeout that
hasn't yet passed and then calling timer_reduce().
The disadvantage of doing things this way rather than comparing the timers
each time and calling mod_timer() is that you *will* take timer events
unless you can finish what you're doing and delete the timer in time.
The advantage of doing things this way is that you don't need to use a lock
to work out when the next timer should be set, other than the timer's own
lock - which you might not have to take.
[ tglx: Fixed weird formatting and adopted it to pending changes ]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: keyrings@vger.kernel.org
Cc: linux-afs@lists.infradead.org
Link: https://lkml.kernel.org/r/151023090769.23050.1801643667223880753.stgit@warthog.procyon.org.uk
In preparation for unconditionally passing the struct timer_list pointer
to all timer callbacks, switch to using the new timer_setup() and
from_timer() to pass the timer pointer explicitly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
If the base clock is behind jiffies in the soft irq expiry code then the
next timer is retrieved by get_next_timer_interrupt() to avoid incrementing
base clock one by one. If the next timer interrupt is past current jiffies
then the base clock is set to jiffies - 1. At the call site this is
incremented and another iteration through the expiry loop is executed which
checks empty hash buckets.
That's a pointless excercise because it's already known that the next timer
is past jiffies.
Set the base clock in that case to jiffies directly so it gets incremented
to jiffies + 1 at the call site resulting in immediate termination of the
expiry loop.
[ tglx: Massaged changelog and added comment to the code ]
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Joe Jin <joe.jin@oracle.com>
Cc: sboyd@codeaurora.org
Cc: Srinivas Reddy Eeda <srinivas.eeda@oracle.com>
Cc: john.stultz@linaro.org
Link: https://lkml.kernel.org/r/7086a857-f90c-4616-bbe8-f7696f21626c@default
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new from_timer() helper and passing
the timer pointer explicitly. Since this special timer is on the stack, it
needs to have a wrapper structure to carry state once .data is eliminated.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: Petr Mladek <pmladek@suse.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux1394-devel@lists.sourceforge.net
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: linux-s390@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ursula Braun <ubraun@linux.vnet.ibm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Harish Patil <harish.patil@cavium.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Manish Chopra <manish.chopra@cavium.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-pm@vger.kernel.org
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Mark Gross <mark.gross@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Michael Reed <mdr@sgi.com>
Cc: netdev@vger.kernel.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lkml.kernel.org/r/1507159627-127660-2-git-send-email-keescook@chromium.org
When a timer base is idle, it is forwarded when a new timer is added
to ensure that granularity does not become excessive. When not idle,
the timer tick is expected to increment the base.
However there are several problems:
- If an existing timer is modified, the base is forwarded only after
the index is calculated.
- The base is not forwarded by add_timer_on.
- There is a window after a timer is restarted from a nohz idle, after
it is marked not-idle and before the timer tick on this CPU, where a
timer may be added but the ancient base does not get forwarded.
These result in excessive granularity (a 1 jiffy timeout can blow out
to 100s of jiffies), which cause the rcu lockup detector to trigger,
among other things.
Fix this by keeping track of whether the timer base has been idle
since it was last run or forwarded, and if so then forward it before
adding a new timer.
There is still a case where mod_timer optimises the case of a pending
timer mod with the same expiry time, where the timer can see excessive
granularity relative to the new, shorter interval. A comment is added,
but it's not changed because it is an important fastpath for
networking.
This has been tested and found to fix the RCU softlockup messages.
Testing was also done with tracing to measure requested versus
achieved wakeup latencies for all non-deferrable timers in an idle
system (with no lockup watchdogs running). Wakeup latency relative to
absolute latency is calculated (note this suffers from round-up skew
at low absolute times) and analysed:
max avg std
upstream 506.0 1.20 4.68
patched 2.0 1.08 0.15
The bug was noticed due to the lockup detector Kconfig changes
dropping it out of people's .configs and resulting in larger base
clk skew When the lockup detectors are enabled, no CPU can go idle for
longer than 4 seconds, which limits the granularity errors.
Sub-optimal timer behaviour is observable on a smaller scale in that
case:
max avg std
upstream 9.0 1.05 0.19
patched 2.0 1.04 0.11
Fixes: Fixes: a683f390b9 ("timers: Forward the wheel clock whenever possible")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: David Miller <davem@davemloft.net>
Cc: dzickus@redhat.com
Cc: sfr@canb.auug.org.au
Cc: mpe@ellerman.id.au
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linuxarm@huawei.com
Cc: abdhalee@linux.vnet.ibm.com
Cc: John Stultz <john.stultz@linaro.org>
Cc: akpm@linux-foundation.org
Cc: paulmck@linux.vnet.ibm.com
Cc: torvalds@linux-foundation.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170822084348.21436-1-npiggin@gmail.com
For e.g. HZ=100, timer being 430 jiffies in the future, and 32 bit
unsigned int, there is an overflow on unsigned int right-hand side
of the expression which results with wrong values being returned.
Type cast the multiplier to 64bit to avoid that issue.
Fixes: 46c8f0b077 ("timers: Fix get_next_timer_interrupt() computation")
Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: khilman@baylibre.com
Cc: akpm@linux-foundation.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/a7900f04-2a21-c9fd-67be-ab334d459ee5@nokia.com
The timers cpu base lock could not be converted to a raw spinlock becaue
the lock held time was non-deterministic due to cascading and long lasting
timer wheel traversals.
The rework of the timer wheel to the new non-cascading model removed also
the wheel traversals and the lock held times are deterministic now. This
allows to make the lock raw and thereby unbreaks NOHz* on preempt-RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/20170627161538.30257-1-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
timer_migration sysctl acts as a boolean switch, so the allowed values
should be restricted to 0 and 1.
Add the necessary extra fields to the sysctl table entry to enforce that.
[ tglx: Rewrote changelog ]
Signed-off-by: Myungho Jung <mhjungk@gmail.com>
Link: http://lkml.kernel.org/r/1492640690-3550-1-git-send-email-mhjungk@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch fix spelling typos found in
Documentation/output/xml/driver-api/basics.xml.
It is because the xml file was generated from comments in source,
so I had to fix the comments.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/debug.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/nohz.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/nohz.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently CONFIG_TIMER_STATS exposes process information across namespaces:
kernel/time/timer_list.c print_timer():
SEQ_printf(m, ", %s/%d", tmp, timer->start_pid);
/proc/timer_list:
#11: <0000000000000000>, hrtimer_wakeup, S:01, do_nanosleep, cron/2570
Given that the tracer can give the same information, this patch entirely
removes CONFIG_TIMER_STATS.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: linux-doc@vger.kernel.org
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Xing Gao <xgao01@email.wm.edu>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jessica Frazelle <me@jessfraz.com>
Cc: kernel-hardening@lists.openwall.com
Cc: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-api@vger.kernel.org
Cc: Arjan van de Ven <arjan@linux.intel.com>
Link: http://lkml.kernel.org/r/20170208192659.GA32582@beast
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull timer updates from Thomas Gleixner:
"The time/timekeeping/timer folks deliver with this update:
- Fix a reintroduced signed/unsigned issue and cleanup the whole
signed/unsigned mess in the timekeeping core so this wont happen
accidentaly again.
- Add a new trace clock based on boot time
- Prevent injection of random sleep times when PM tracing abuses the
RTC for storage
- Make posix timers configurable for real tiny systems
- Add tracepoints for the alarm timer subsystem so timer based
suspend wakeups can be instrumented
- The usual pile of fixes and updates to core and drivers"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
timekeeping: Use mul_u64_u32_shr() instead of open coding it
timekeeping: Get rid of pointless typecasts
timekeeping: Make the conversion call chain consistently unsigned
timekeeping_Force_unsigned_clocksource_to_nanoseconds_conversion
alarmtimer: Add tracepoints for alarm timers
trace: Update documentation for mono, mono_raw and boot clock
trace: Add an option for boot clock as trace clock
timekeeping: Add a fast and NMI safe boot clock
timekeeping/clocksource_cyc2ns: Document intended range limitation
timekeeping: Ignore the bogus sleep time if pm_trace is enabled
selftests/timers: Fix spelling mistake "Asyncrhonous" -> "Asynchronous"
clocksource/drivers/bcm2835_timer: Unmap region obtained by of_iomap
clocksource/drivers/arm_arch_timer: Map frame with of_io_request_and_map()
arm64: dts: rockchip: Arch counter doesn't tick in system suspend
clocksource/drivers/arm_arch_timer: Don't assume clock runs in suspend
posix-timers: Make them configurable
posix_cpu_timers: Move the add_device_randomness() call to a proper place
timer: Move sys_alarm from timer.c to itimer.c
ptp_clock: Allow for it to be optional
Kconfig: Regenerate *.c_shipped files after previous changes
...
Some embedded systems have no use for them. This removes about
25KB from the kernel binary size when configured out.
Corresponding syscalls are routed to a stub logging the attempt to
use those syscalls which should be enough of a clue if they were
disabled without proper consideration. They are: timer_create,
timer_gettime: timer_getoverrun, timer_settime, timer_delete,
clock_adjtime, setitimer, getitimer, alarm.
The clock_settime, clock_gettime, clock_getres and clock_nanosleep
syscalls are replaced by simple wrappers compatible with CLOCK_REALTIME,
CLOCK_MONOTONIC and CLOCK_BOOTTIME only which should cover the vast
majority of use cases with very little code.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-kbuild@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: Michal Marek <mmarek@suse.com>
Cc: Edward Cree <ecree@solarflare.com>
Link: http://lkml.kernel.org/r/1478841010-28605-7-git-send-email-nicolas.pitre@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move the only user of alarm_setitimer to itimer.c where it is defined.
This allows for making alarm_setitimer static, and dropping it from the
build when __ARCH_WANT_SYS_ALARM is not defined.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-kbuild@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: Edward Cree <ecree@solarflare.com>
Link: http://lkml.kernel.org/r/1478841010-28605-5-git-send-email-nicolas.pitre@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The documentation for schedule_timeout(), schedule_hrtimeout(), and
schedule_hrtimeout_range() all claim that the routines couldn't possibly
return early if the task state was TASK_UNINTERRUPTIBLE. This is simply
not true since wake_up_process() will cause those routines to exit early.
We cannot make schedule_[hr]timeout() loop until the timeout expires if the
task state is uninterruptible because we have users which rely on the
existing and designed behaviour.
Make the documentation match the (correct) implementation.
schedule_hrtimeout() returns -EINTR even when a uninterruptible task was
woken up. This might look strange, but making the return code depend on the
state is too much of an effort as it would affect all the call sites. There
is no value in doing so, but we spell it out clearly in the documentation.
Suggested-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: huangtao@rock-chips.com
Cc: heiko@sntech.de
Cc: broonie@kernel.org
Cc: briannorris@chromium.org
Cc: Andreas Mohr <andi@lisas.de>
Cc: linux-rockchip@lists.infradead.org
Cc: tony.xie@rock-chips.com
Cc: John Stultz <john.stultz@linaro.org>
Cc: linux@roeck-us.net
Cc: tskd08@gmail.com
Link: http://lkml.kernel.org/r/1477065531-30342-2-git-send-email-dianders@chromium.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Users of usleep_range() expect that it will _never_ return in less time
than the minimum passed parameter. However, nothing in the code ensures
this, when the sleeping task is woken by wake_up_process() or any other
mechanism which can wake a task from uninterruptible state.
Neither usleep_range() nor schedule_hrtimeout_range*() have any protection
against wakeups. schedule_hrtimeout_range*() is designed this way despite
the fact that the API documentation does not mention it.
msleep() already has code to handle this case since it will loop as long
as there was still time left. usleep_range() has no such loop, add it.
Presumably this problem was not detected before because usleep_range() is
only used in a few places and the function is mostly used in contexts which
are not exposed to wakeups of any form.
An effort was made to look for users relying on the old behavior by
looking for usleep_range() in the same file as wake_up_process().
No problems were found by this search, though it is conceivable that
someone could have put the sleep and wakeup in two different files.
An effort was made to ask several upstream maintainers if they were aware
of people relying on wake_up_process() to wake up usleep_range(). No
maintainers were aware of that but they were aware of many people relying
on usleep_range() never returning before the minimum.
Reported-by: Tao Huang <huangtao@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: heiko@sntech.de
Cc: broonie@kernel.org
Cc: briannorris@chromium.org
Cc: Andreas Mohr <andi@lisas.de>
Cc: linux-rockchip@lists.infradead.org
Cc: tony.xie@rock-chips.com
Cc: John Stultz <john.stultz@linaro.org>
Cc: djkurtz@chromium.org
Cc: linux@roeck-us.net
Cc: tskd08@gmail.com
Link: http://lkml.kernel.org/r/1477065531-30342-1-git-send-email-dianders@chromium.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When a timer is enqueued we try to forward the timer base clock. This
mechanism has two issues:
1) Forwarding a remote base unlocked
The forwarding function is called from get_target_base() with the current
timer base lock held. But if the new target base is a different base than
the current base (can happen with NOHZ, sigh!) then the forwarding is done
on an unlocked base. This can lead to corruption of base->clk.
Solution is simple: Invoke the forwarding after the target base is locked.
2) Possible corruption due to jiffies advancing
This is similar to the issue in get_net_timer_interrupt() which was fixed
in the previous patch. jiffies can advance between check and assignement
and therefore advancing base->clk beyond the next expiry value.
So we need to read jiffies into a local variable once and do the checks and
assignment with the local copy.
Fixes: a683f390b93f("timers: Forward the wheel clock whenever possible")
Reported-by: Ashton Holmes <scoopta@gmail.com>
Reported-by: Michael Thayer <michael.thayer@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Michal Necasek <michal.necasek@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: knut.osmundsen@oracle.com
Cc: stable@vger.kernel.org
Cc: stern@rowland.harvard.edu
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20161022110552.253640125@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ashton and Michael reported, that kernel versions 4.8 and later suffer from
USB timeouts which are caused by the timer wheel rework.
This is caused by a bug in the base clock forwarding mechanism, which leads
to timers expiring early. The scenario which leads to this is:
run_timers()
while (jiffies >= base->clk) {
collect_expired_timers();
base->clk++;
expire_timers();
}
So base->clk = jiffies + 1. Now the cpu goes idle:
idle()
get_next_timer_interrupt()
nextevt = __next_time_interrupt();
if (time_after(nextevt, base->clk))
base->clk = jiffies;
jiffies has not advanced since run_timers(), so this assignment effectively
decrements base->clk by one.
base->clk is the index into the timer wheel arrays. So let's assume the
following state after the base->clk increment in run_timers():
jiffies = 0
base->clk = 1
A timer gets enqueued with an expiry delta of 63 ticks (which is the case
with the USB timeout and HZ=250) so the resulting bucket index is:
base->clk + delta = 1 + 63 = 64
The timer goes into the first wheel level. The array size is 64 so it ends
up in bucket 0, which is correct as it takes 63 ticks to advance base->clk
to index into bucket 0 again.
If the cpu goes idle before jiffies advance, then the bug in the forwarding
mechanism sets base->clk back to 0, so the next invocation of run_timers()
at the next tick will index into bucket 0 and therefore expire the timer 62
ticks too early.
Instead of blindly setting base->clk to jiffies we must make the forwarding
conditional on jiffies > base->clk, but we cannot use jiffies for this as
we might run into the following issue:
if (time_after(jiffies, base->clk) {
if (time_after(nextevt, base->clk))
base->clk = jiffies;
jiffies can increment between the check and the assigment far enough to
advance beyond nextevt. So we need to use a stable value for checking.
get_next_timer_interrupt() has the basej argument which is the jiffies
value snapshot taken in the calling code. So we can just that.
Thanks to Ashton for bisecting and providing trace data!
Fixes: a683f390b9 ("timers: Forward the wheel clock whenever possible")
Reported-by: Ashton Holmes <scoopta@gmail.com>
Reported-by: Michael Thayer <michael.thayer@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Michal Necasek <michal.necasek@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: knut.osmundsen@oracle.com
Cc: stable@vger.kernel.org
Cc: stern@rowland.harvard.edu
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20161022110552.175308322@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Linus stumbled over the unlocked modification of the timer expiry value in
mod_timer() which is an optimization for timers which stay in the same
bucket - due to the bucket granularity - despite their expiry time getting
updated.
The optimization itself still makes sense even if we take the lock, because
in case that the bucket stays the same, we avoid the pointless
queue/enqueue dance.
Make the check and the modification of timer->expires protected by the base
lock and shuffle the remaining code around so we can keep the lock held
when we actually have to requeue the timer to a different bucket.
Fixes: f00c0afdfa ("timers: Implement optimization for same expiry time in mod_timer()")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1610241711220.4983@nanos
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Linus noticed that lock_timer_base() lacks a READ_ONCE() for accessing the
timer flags. As a consequence the compiler is allowed to reload the flags
between the initial check for TIMER_MIGRATION and the following timer base
computation and the spin lock of the base.
While this has not been observed (yet), we need to make sure that it never
happens.
Fixes: 0eeda71bc3 ("timer: Replace timer base by a cpu index")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1610241711220.4983@nanos
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
The __latent_entropy gcc attribute can be used only on functions and
variables. If it is on a function then the plugin will instrument it for
gathering control-flow entropy. If the attribute is on a variable then
the plugin will initialize it with random contents. The variable must
be an integer, an integer array type or a structure with integer fields.
These specific functions have been selected because they are init
functions (to help gather boot-time entropy), are called at unpredictable
times, or they have variable loops, each of which provide some level of
latent entropy.
Signed-off-by: Emese Revfy <re.emese@gmail.com>
[kees: expanded commit message]
Signed-off-by: Kees Cook <keescook@chromium.org>
The tick_nohz_stop_sched_tick() routine is not properly
canceling the sched timer when nothing is pending, because
get_next_timer_interrupt() is no longer returning KTIME_MAX in
that case. This causes periodic interrupts when none are needed.
When determining the next interrupt time, we first use
__next_timer_interrupt() to get the first expiring timer in the
timer wheel. If no timer is found, we return the base clock value
plus NEXT_TIMER_MAX_DELTA to indicate there is no timer in the
timer wheel.
Back in get_next_timer_interrupt(), we set the "expires" value
by converting the timer wheel expiry (in ticks) to a nsec value.
But we don't want to do this if the timer wheel expiry value
indicates no timer; we want to return KTIME_MAX.
Prior to commit 500462a9de ("timers: Switch to a non-cascading
wheel") we checked base->active_timers to see if any timers
were active, and if not, we didn't touch the expiry value and so
properly returned KTIME_MAX. Now we don't have active_timers.
To fix this, we now just check the timer wheel expiry value to
see if it is "now + NEXT_TIMER_MAX_DELTA", and if it is, we don't
try to compute a new value based on it, but instead simply let the
KTIME_MAX value in expires remain.
Fixes: 500462a9de "timers: Switch to a non-cascading wheel"
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/1470688147-22287-1-git-send-email-cmetcalf@mellanox.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When tearing down, call timers_dead_cpu() before notify_dead().
There is a hidden dependency between:
- timers
- block multiqueue
- rcutree
If timers_dead_cpu() comes later than blk_mq_queue_reinit_notify()
that latter function causes a RCU stall.
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160713153337.566790058@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The existing optimization for same expiry time in mod_timer() checks whether
the timer expiry time is the same as the new requested expiry time. In the old
timer wheel implementation this does not take the slack batching into account,
neither does the new implementation evaluate whether the new expiry time will
requeue the timer to the same bucket.
To optimize that, we can calculate the resulting bucket and check if the new
expiry time is different from the current expiry time. This calculation
happens outside the base lock held region. If the resulting bucket is the same
we can avoid taking the base lock and requeueing the timer.
If the timer needs to be requeued then we have to check under the base lock
whether the base time has changed between the lockless calculation and taking
the lock. If it has changed we need to recalculate under the lock.
This optimization takes effect for timers which are enqueued into the less
granular wheel levels (1 and above). With a simple test case the functionality
has been verified:
Before After
Match: 5.5% 86.6%
Requeue: 94.5% 13.4%
Recalc: <0.01%
In the non optimized case the timer is requeued in 94.5% of the cases. With
the index optimization in place the requeue rate drops to 13.4%. The case
where the lockless index calculation has to be redone is less than 0.01%.
With a real world test case (networking) we observed the following changes:
Before After
Match: 97.8% 99.7%
Requeue: 2.2% 0.3%
Recalc: <0.001%
That means two percent fewer lock/requeue/unlock operations done in one of
the hot path use cases of timers.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094342.778527749@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For further optimizations we need to seperate index calculation
from queueing. No functional change.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094342.691159619@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With the wheel forwading in place and with the HZ=1000 4ms folding we can
avoid running the softirq at all.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094342.607650550@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The wheel clock is stale when a CPU goes into a long idle sleep. This has the
side effect that timers which are queued end up in the outer wheel levels.
That results in coarser granularity.
To solve this, we keep track of the idle state and forward the wheel clock
whenever possible.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094342.512039360@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After a NOHZ idle sleep the timer wheel must be forwarded to current jiffies.
There might be expired timers so the current code loops and checks the expired
buckets for timers. This can take quite some time for long NOHZ idle periods.
The pending bitmask in the timer base allows us to do a quick search for the
next expiring timer and therefore a fast forward of the base time which
prevents pointless long lasting loops.
For a 3 seconds idle sleep this reduces the catchup time from ~1ms to 5us.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094342.351296290@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move __run_timers() below __next_timer_interrupt() and next_pending_bucket()
in preparation for __run_timers() NOHZ optimization.
No functional change.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094342.271872665@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We now have implicit batching in the timer wheel. The slack API is no longer
used, so remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-block@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094342.189813118@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The current timer wheel has some drawbacks:
1) Cascading:
Cascading can be an unbound operation and is completely pointless in most
cases because the vast majority of the timer wheel timers are canceled or
rearmed before expiration. (They are used as timeout safeguards, not as
real timers to measure time.)
2) No fast lookup of the next expiring timer:
In NOHZ scenarios the first timer soft interrupt after a long NOHZ period
must fast forward the base time to the current value of jiffies. As we
have no way to find the next expiring timer fast, the code loops linearly
and increments the base time one by one and checks for expired timers
in each step. This causes unbound overhead spikes exactly in the moment
when we should wake up as fast as possible.
After a thorough analysis of real world data gathered on laptops,
workstations, webservers and other machines (thanks Chris!) I came to the
conclusion that the current 'classic' timer wheel implementation can be
modified to address the above issues.
The vast majority of timer wheel timers is canceled or rearmed before
expiry. Most of them are timeouts for networking and other I/O tasks. The
nature of timeouts is to catch the exception from normal operation (TCP ack
timed out, disk does not respond, etc.). For these kinds of timeouts the
accuracy of the timeout is not really a concern. Timeouts are very often
approximate worst-case values and in case the timeout fires, we already
waited for a long time and performance is down the drain already.
The few timers which actually expire can be split into two categories:
1) Short expiry times which expect halfways accurate expiry
2) Long term expiry times are inaccurate today already due to the
batching which is done for NOHZ automatically and also via the
set_timer_slack() API.
So for long term expiry timers we can avoid the cascading property and just
leave them in the less granular outer wheels until expiry or
cancelation. Timers which are armed with a timeout larger than the wheel
capacity are no longer cascaded. We expire them with the longest possible
timeout (6+ days). We have not observed such timeouts in our data collection,
but at least we handle them, applying the rule of the least surprise.
To avoid extending the wheel levels for HZ=1000 so we can accomodate the
longest observed timeouts (5 days in the network conntrack code) we reduce the
first level granularity on HZ=1000 to 4ms, which effectively is the same as
the HZ=250 behaviour. From our data analysis there is nothing which relies on
that 1ms granularity and as a side effect we get better batching and timer
locality for the networking code as well.
Contrary to the classic wheel the granularity of the next wheel is not the
capacity of the first wheel. The granularities of the wheels are in the
currently chosen setting 8 times the granularity of the previous wheel.
So for HZ=250 we end up with the following granularity levels:
Level Offset Granularity Range
0 0 4 ms 0 ms - 252 ms
1 64 32 ms 256 ms - 2044 ms (256ms - ~2s)
2 128 256 ms 2048 ms - 16380 ms (~2s - ~16s)
3 192 2048 ms (~2s) 16384 ms - 131068 ms (~16s - ~2m)
4 256 16384 ms (~16s) 131072 ms - 1048572 ms (~2m - ~17m)
5 320 131072 ms (~2m) 1048576 ms - 8388604 ms (~17m - ~2h)
6 384 1048576 ms (~17m) 8388608 ms - 67108863 ms (~2h - ~18h)
7 448 8388608 ms (~2h) 67108864 ms - 536870911 ms (~18h - ~6d)
That's a worst case inaccuracy of 12.5% for the timers which are queued at the
beginning of a level.
So the new wheel concept addresses the old issues:
1) Cascading is avoided completely
2) By keeping the timers in the bucket until expiry/cancelation we can track
the buckets which have timers enqueued in a bucket bitmap and therefore can
look up the next expiring timer very fast and O(1).
A further benefit of the concept is that the slack calculation which is done
on every timer start is no longer necessary because the granularity levels
provide natural batching already.
Our extensive testing with various loads did not show any performance
degradation vs. the current wheel implementation.
This patch does not address the 'fast lookup' issue as we wanted to make sure
that there is no regression introduced by the wheel redesign. The
optimizations are in follow up patches.
This patch contains fixes from Anna-Maria Gleixner and Richard Cochran.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094342.108621834@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some of the names in the internal implementation of the timer code
are not longer correct and others are simply too long to type.
Clean it up before we switch the wheel implementation over to
the new scheme.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094341.948752516@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We switched all users to initialize the timers as pinned and call
mod_timer(). Remove the now unused timer API function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094341.706205231@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
