CC_FLAGS_FTRACE is exported and later used to remove ftrace relevant
build flags from files which should be built without ftrace support.
For that reason add -mfentry to CC_FLAGS_FTRACE as well. That fixes
a problem with vdso32 build on s390, where -mfentry could not be used
together with -m31 flag.
At the same time flags like -pg and -mfentry are not relevant for asm
files, so avoid adding them to KBUILD_AFLAGS.
Introduce CC_FLAGS_USING instead of CC_USING_FENTRY to collect
-DCC_USING_FENTRY (and future alike) which are relevant for both
KBUILD_CFLAGS and KBUILD_AFLAGS.
Link: http://lkml.kernel.org/r/patch-1.thread-aa7b8d.git-42971afe87de.your-ad-here.call-01533557518-ext-9465@work.hours
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- show clearer error messages where pkg-config is needed, but not
installed
- rename SYMBOL_AUTO to SYMBOL_NO_WRITE to reflect its semantics
- create all necessary directories by Kconfig tool itself instead
of Makefile
- update the .config unconditionally when syncconfig is invoked
- use 'include' directive instead of '-include' where
include/config/{auto,tristate}.conf is mandatory
- do not try to update the .config when running install targets
- add .DELETE_ON_ERROR to delete partially updated files
- misc cleanups and fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=/Dow
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- show clearer error messages where pkg-config is needed, but not
installed
- rename SYMBOL_AUTO to SYMBOL_NO_WRITE to reflect its semantics
- create all necessary directories by Kconfig tool itself instead of
Makefile
- update the .config unconditionally when syncconfig is invoked
- use 'include' directive instead of '-include' where
include/config/{auto,tristate}.conf is mandatory
- do not try to update the .config when running install targets
- add .DELETE_ON_ERROR to delete partially updated files
- misc cleanups and fixes
* tag 'kconfig-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: remove P_ENV property type
kconfig: remove unused sym_get_env_prop() function
kconfig: fix the rule of mainmenu_stmt symbol
init/Kconfig: Use short unix-style option instead of --longname
Kbuild: Makefile.modbuiltin: include auto.conf and tristate.conf mandatory
kbuild: remove auto.conf from prerequisite of phony targets
kbuild: do not update config for 'make kernelrelease'
kbuild: do not update config when running install targets
kbuild: add .DELETE_ON_ERROR special target
kbuild: use 'include' directive to load auto.conf from top Makefile
kconfig: allow all config targets to write auto.conf if missing
kconfig: make syncconfig update .config regardless of sym_change_count
kconfig: create directories needed for syncconfig by itself
kconfig: remove unneeded directory generation from local*config
kconfig: split out useful helpers in confdata.c
kconfig: rename file_write_dep and move it to confdata.c
kconfig: fix typos in description of "choice" in kconfig-language.txt
kconfig: handle format string before calling conf_message_callback()
kconfig: rename SYMBOL_AUTO to SYMBOL_NO_WRITE
kconfig: check for pkg-config on make {menu,n,g,x}config
- verify depmod is installed before modules_install
- support build salt in case build ids must be unique between builds
- allow users to specify additional host compiler flags via HOST*FLAGS,
and rename internal variables to KBUILD_HOST*FLAGS
- update buildtar script to drop vax support, add arm64 support
- update builddeb script for better debarch support
- document the pit-fall of if_changed usage
- fix parallel build of UML with O= option
- make 'samples' target depend on headers_install to fix build errors
- remove deprecated host-progs variable
- add a new coccinelle script for refcount_t vs atomic_t check
- improve double-test coccinelle script
- misc cleanups and fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VjfG
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- verify depmod is installed before modules_install
- support build salt in case build ids must be unique between builds
- allow users to specify additional host compiler flags via HOST*FLAGS,
and rename internal variables to KBUILD_HOST*FLAGS
- update buildtar script to drop vax support, add arm64 support
- update builddeb script for better debarch support
- document the pit-fall of if_changed usage
- fix parallel build of UML with O= option
- make 'samples' target depend on headers_install to fix build errors
- remove deprecated host-progs variable
- add a new coccinelle script for refcount_t vs atomic_t check
- improve double-test coccinelle script
- misc cleanups and fixes
* tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
coccicheck: return proper error code on fail
Coccinelle: doubletest: reduce side effect false positives
kbuild: remove deprecated host-progs variable
kbuild: make samples really depend on headers_install
um: clean up archheaders recipe
kbuild: add %asm-generic to no-dot-config-targets
um: fix parallel building with O= option
scripts: Add Python 3 support to tracing/draw_functrace.py
builddeb: Add automatic support for sh{3,4}{,eb} architectures
builddeb: Add automatic support for riscv* architectures
builddeb: Add automatic support for m68k architecture
builddeb: Add automatic support for or1k architecture
builddeb: Add automatic support for sparc64 architecture
builddeb: Add automatic support for mips{,64}r6{,el} architectures
builddeb: Add automatic support for mips64el architecture
builddeb: Add automatic support for ppc64 and powerpcspe architectures
builddeb: Introduce functions to simplify kconfig tests in set_debarch
builddeb: Drop check for 32-bit s390
builddeb: Change architecture detection fallback to use dpkg-architecture
builddeb: Skip architecture detection when KBUILD_DEBARCH is set
...
Kernel headers must be installed into $(objtree)/usr/include to avoid
the build failure of samples.
Commit ddea05fa14 ("kbuild: make samples depend on headers_install")
addressed this, but "samples/" is only used for the single target build.
"make samples/" properly installs kernel headers, but it does not work
for general building because a phony target "sample" (no trailing slash)
is used.
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: David Howells <dhowells@redhat.com>
asm-generic and uapi-asm-generic do not depend on the kernel
configuration. In fact, uapi-asm-generic is the prerequisite of
headers_{install,check}, hence it should not require the .config file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Richard Weinberger <richard@nod.at>
Currently, filechk unconditionally opens the first prerequisite and
redirects it as the stdin of a filechk_* rule. Hence, every target
using $(call filechk,...) must list something as the first prerequisite
even if it is unneeded.
'< $<' is actually unneeded in most cases. Each rule can explicitly
adds it if necessary.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The top-level Makefile adds include/config/auto.conf as
prerequisites of 'scripts', 'prepare1', etc.
They were needed to terminate the build when include/config/auto.conf
is missing.
Now that the inclusion of include/config/auto.conf is mandatory
in the top-level Makefile if dot-config is 1 (Note 'include' directive
is used instead of '-include').
Make terminates the build by itself if it fails to create or update
include/config/auto.conf so we are sure that include/config/auto.conf
exists in the very first stage of make.
I am still keeping include/config/auto.conf as the prerequisite of
%/modules.builtin because modules.builtin is a real file. According
to commit a6c366324c ("kbuild: Do not unnecessarily regenerate
modules.builtin"), it is intentional to compare time-stamps between
%/modules.builtin and include/config/auto.conf . I moved tristate.conf
here because it is only included from scripts/Makefile.modbuiltin.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
'make kernelrelease' depends on CONFIG_LOCALVERSION(_AUTO), but
for the same reason as install targets, we do not want to update
the configuration just for printing the kernelrelease string.
This is likely to happen when you compiled the kernel with
CROSS_COMPILE, but forget to pass it to 'make kernelrelease'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
"make syncconfig" is automatically invoked when any of the following
happens:
- .config is updated
- any of Kconfig files is updated
- any of environment variables referenced in Kconfig is changed
Then, it updates configuration files such as include/config/auto.conf
include/generated/autoconf.h, etc.
Even install targets (install, modules_install, etc.) are no exception.
However, they should never ever modify the source tree. Install
targets are often run with root privileges. Once those configuration
files are owned by root, "make mrproper" would end up with permission
error.
Install targets should just copy things blindly. They should not care
whether the configuration is up-to-date or not. This makes more sense
because we are interested in the configuration that was used in the
previous kernel building.
This issue has existed since before, but rarely happened. I expect
more chance where people are hit by this; with the new Kconfig syntax
extension, the .config now contains the compiler information. If you
cross-compile the kernel with CROSS_COMPILE, but forget to pass it
for "make install", you meet "any of environment variables referenced
in Kconfig is changed" because $(CC) is referenced in Kconfig.
Another scenario is the compiler upgrade before the installation.
Install targets need the configuration. "make modules_install" refer
to CONFIG_MODULES etc. "make dtbs_install" also needs CONFIG_ARCH_*
to decide which dtb files to install. However, the auto-update of
the configuration files should be avoided. We already do this for
external modules.
Now, Make targets are categorized into 3 groups:
[1] Do not need the kernel configuration at all
help, coccicheck, headers_install etc.
[2] Need the latest kernel configuration
If new config options are added, Kconfig will show prompt to
ask user's selection.
Build targets such as vmlinux, in-kernel modules are the cases.
[3] Need the kernel configuration, but do not want to update it
Install targets except headers_install, and external modules
are the cases.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When you build targets that require the kernel configuration, dot-config
is set to 1, then the top-level Makefile includes auto.conf. However,
Make considers its inclusion is optional because the '-include' directive
is used here.
If a necessary configuration file is missing for the external module
building, the following error message is displayed:
ERROR: Kernel configuration is invalid.
include/generated/autoconf.h or include/config/auto.conf are missing.
Run 'make oldconfig && make prepare' on kernel src to fix it.
However, Make still continues building; /bin/false let the creation of
'include/config/auto.config' fail, but Make can ignore the error since
it is included by the '-include' directive.
I guess the reason of using '-include' directive was to suppress
the warning when you build the kernel from a pristine source tree:
Makefile:605: include/config/auto.conf: No such file or directory
The previous commit made sure include/config/auto.conf exists after
the 'make *config' stage. Now, we can use the 'include' directive
without showing the warning.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Now that we have the rename in place, reuse the HOST*FLAGS options as
something that can be set from the command line and included with the
rest of the flags.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In preparation for enabling command line LDLIBS, re-name HOST_LOADLIBES
to KBUILD_HOSTLDLIBS as the internal use only flags. Also rename
existing usage to HOSTLDLIBS for consistency. This should not have any
visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In preparation for enabling command line LDFLAGS, re-name HOSTLDFLAGS
to KBUILD_HOSTLDFLAGS as the internal use only flags. This should not
have any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In preparation for enabling command line CXXFLAGS, re-name HOSTCXXFLAGS
to KBUILD_HOSTCXXFLAGS as the internal use only flags. This should not
have any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to
KBUILD_HOSTCFLAGS as the internal use only flags. This should not have
any visible effects.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- update Kbuild and Kconfig documents
- sanitize -I compiler option handling
- update extract-vmlinux script to recognize LZ4 and ZSTD
- fix tools Makefiles
- update tags.sh to handle __ro_after_init
- suppress warnings in case getconf does not recognize LFS_* parameters
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=aXcg
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- update Kbuild and Kconfig documents
- sanitize -I compiler option handling
- update extract-vmlinux script to recognize LZ4 and ZSTD
- fix tools Makefiles
- update tags.sh to handle __ro_after_init
- suppress warnings in case getconf does not recognize LFS_* parameters
* tag 'kbuild-fixes-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: suppress warnings from 'getconf LFS_*'
scripts/tags.sh: add __ro_after_init
tools: build: Use HOSTLDFLAGS with fixdep
tools: build: Fixup host c flags
tools build: fix # escaping in .cmd files for future Make
scripts: teach extract-vmlinux about LZ4 and ZSTD
kbuild: remove duplicated comments about PHONY
kbuild: .PHONY is not a variable, but PHONY is
kbuild: do not drop -I without parameter
kbuild: document the KBUILD_KCONFIG env. variable
kconfig: update user kconfig tools doc.
kbuild: delete INSTALL_FW_PATH from kbuild documentation
kbuild: update ARCH alias info for sparc
kbuild: update ARCH alias info for sh
Suppress warnings for systems that do not recognize LFS_*.
getconf: no such configuration parameter `LFS_CFLAGS'
getconf: no such configuration parameter `LFS_LDFLAGS'
getconf: no such configuration parameter `LFS_LIBS'
Fixes: d7f14c66c2 ("kbuild: Enable Large File Support for hostprogs")
Reported-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Pull networking fixes from David Miller:
1) Verify netlink attributes properly in nf_queue, from Eric Dumazet.
2) Need to bump memory lock rlimit for test_sockmap bpf test, from
Yonghong Song.
3) Fix VLAN handling in lan78xx driver, from Dave Stevenson.
4) Fix uninitialized read in nf_log, from Jann Horn.
5) Fix raw command length parsing in mlx5, from Alex Vesker.
6) Cleanup loopback RDS connections upon netns deletion, from Sowmini
Varadhan.
7) Fix regressions in FIB rule matching during create, from Jason A.
Donenfeld and Roopa Prabhu.
8) Fix mpls ether type detection in nfp, from Pieter Jansen van Vuuren.
9) More bpfilter build fixes/adjustments from Masahiro Yamada.
10) Fix XDP_{TX,REDIRECT} flushing in various drivers, from Jesper
Dangaard Brouer.
11) fib_tests.sh file permissions were broken, from Shuah Khan.
12) Make sure BH/preemption is disabled in data path of mac80211, from
Denis Kenzior.
13) Don't ignore nla_parse_nested() return values in nl80211, from
Johannes berg.
14) Properly account sock objects ot kmemcg, from Shakeel Butt.
15) Adjustments to setting bpf program permissions to read-only, from
Daniel Borkmann.
16) TCP Fast Open key endianness was broken, it always took on the host
endiannness. Whoops. Explicitly make it little endian. From Yuching
Cheng.
17) Fix prefix route setting for link local addresses in ipv6, from
David Ahern.
18) Potential Spectre v1 in zatm driver, from Gustavo A. R. Silva.
19) Various bpf sockmap fixes, from John Fastabend.
20) Use after free for GRO with ESP, from Sabrina Dubroca.
21) Passing bogus flags to crypto_alloc_shash() in ipv6 SR code, from
Eric Biggers.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
qede: Adverstise software timestamp caps when PHC is not available.
qed: Fix use of incorrect size in memcpy call.
qed: Fix setting of incorrect eswitch mode.
qed: Limit msix vectors in kdump kernel to the minimum required count.
ipvlan: call dev_change_flags when ipvlan mode is reset
ipv6: sr: fix passing wrong flags to crypto_alloc_shash()
net: fix use-after-free in GRO with ESP
tcp: prevent bogus FRTO undos with non-SACK flows
bpf: sockhash, add release routine
bpf: sockhash fix omitted bucket lock in sock_close
bpf: sockmap, fix smap_list_map_remove when psock is in many maps
bpf: sockmap, fix crash when ipv6 sock is added
net: fib_rules: bring back rule_exists to match rule during add
hv_netvsc: split sub-channel setup into async and sync
net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN
atm: zatm: Fix potential Spectre v1
s390/qeth: consistently re-enable device features
s390/qeth: don't clobber buffer on async TX completion
s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6]
s390/qeth: fix race when setting MAC address
...
With the brand-new syntax extension of Kconfig, we can directly
check the compiler capability in the configuration phase.
If the cc-can-link.sh fails, the BPFILTER_UMH is automatically
hidden by the dependency.
I also deleted 'default n', which is no-op.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The changes to automatically test for working stack protector compiler
support in the Kconfig files removed the special STACKPROTECTOR_AUTO
option that picked the strongest stack protector that the compiler
supported.
That was all a nice cleanup - it makes no sense to have the AUTO case
now that the Kconfig phase can just determine the compiler support
directly.
HOWEVER.
It also meant that doing "make oldconfig" would now _disable_ the strong
stackprotector if you had AUTO enabled, because in a legacy config file,
the sane stack protector configuration would look like
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_CC_STACKPROTECTOR_AUTO=y
and when you ran this through "make oldconfig" with the Kbuild changes,
it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had
been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just
CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version
used to be disabled (because it was really enabled by AUTO), and would
disable it in the new config, resulting in:
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
That's dangerously subtle - people could suddenly find themselves with
the weaker stack protector setup without even realizing.
The solution here is to just rename not just the old RECULAR stack
protector option, but also the strong one. This does that by just
removing the CC_ prefix entirely for the user choices, because it really
is not about the compiler support (the compiler support now instead
automatially impacts _visibility_ of the options to users).
This results in "make oldconfig" actually asking the user for their
choice, so that we don't have any silent subtle security model changes.
The end result would generally look like this:
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
where the "CC_" versions really are about internal compiler
infrastructure, not the user selections.
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As Documentation/kbuild/kconfig-language.txt notes, 'select' should be
be used with care - it forces a lower limit of another symbol, ignoring
the dependency. Currently, KCOV can select GCC_PLUGINS even if arch
does not select HAVE_GCC_PLUGINS. This could cause the unmet direct
dependency.
Now that Kconfig can test compiler capability, let's handle this in a
more sophisticated way.
There are two ways to enable KCOV; use the compiler that natively
supports -fsanitize-coverage=trace-pc, or build the SANCOV plugin if
the compiler has ability to build GCC plugins. Hence, the correct
dependency for KCOV is:
depends on CC_HAS_SANCOV_TRACE_PC || GCC_PLUGINS
You do not need to build the SANCOV plugin if the compiler already
supports -fsanitize-coverage=trace-pc. Hence, the select should be:
select GCC_PLUGIN_SANCOV if !CC_HAS_SANCOV_TRACE_PC
With this, GCC_PLUGIN_SANCOV is selected only when necessary, so
scripts/Makefile.gcc-plugins can be cleaner.
I also cleaned up Kconfig and scripts/Makefile.kcov as well.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Move the test for -fstack-protector(-strong) option to Kconfig.
If the compiler does not support the option, the corresponding menu
is automatically hidden. If STRONG is not supported, it will fall
back to REGULAR. If REGULAR is not supported, it will be disabled.
This means, AUTO is implicitly handled by the dependency solver of
Kconfig, hence removed.
I also turned the 'choice' into only two boolean symbols. The use of
'choice' is not a good idea here, because all of all{yes,mod,no}config
would choose the first visible value, while we want allnoconfig to
disable as many features as possible.
X86 has additional shell scripts in case the compiler supports those
options, but generates broken code. I added CC_HAS_SANE_STACKPROTECTOR
to test this. I had to add -m32 to gcc-x86_32-has-stack-protector.sh
to make it work correctly.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>
Commit 21c54b7747 ("kconfig: show compiler version text in the top
comment") was intended to detect the compiler upgrade, but Geert
reported a breakage on the m68k build.
The compiler upgrade is detected by the change of the environment
variable, CC_VERSION_TEXT, which contains the first line of the output
from $(CC) --version. Currently, this works well when CROSS_COMPILE
is given via the environment variable or the Make command line.
However, some architectures such as m68k can specify CROSS_COMPILE
from arch/$(SRCARCH)/Makefile as well. In this case, "make ARCH=m68k"
ends up with endless syncconfig loop.
$ make ARCH=m68k defconfig
*** Default configuration is based on 'multi_defconfig'
#
# configuration written to .config
#
$ make ARCH=m68k
scripts/kconfig/conf --syncconfig Kconfig
scripts/kconfig/conf --syncconfig Kconfig
scripts/kconfig/conf --syncconfig Kconfig
scripts/kconfig/conf --syncconfig Kconfig
Things are happening like this:
Because arch/$(SRCARCH)/Makefile is included after CC_VERSION_TEXT
is set, it contains the host compiler version in the defconfig phase.
To create or update auto.conf, the following line is triggered:
include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
$(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
This recurses the top Makefile after arch/$(SRCARCH)/Makefile is
included. CROSS_COMPILE is set to a m68k toolchain prefix and
exported to the recursed Make. Then, syncconfig is invoked with
the target compiler version in CC_VERSION_TEXT.
The Make will restart because auto.conf and auto.conf.cmd have been
updated. At this point, CROSS_COMPILE is reset, so CC_VERSION_TEXT
is set to the host compiler version again. Then, syncconfig is
triggered due to the change of CC_VERSION_TEXT. This loop continues
eternally.
To fix this problem, $(CC_VERSION_TEXT) must be evaluated only after
arch/$(SRCARCH)/Makefile. Setting it earlier is OK as long as it is
defined by using the '=' operator instead of ':='.
For the defconfig phase, $(CC_VERSION_TEXT) is evaluated when Kbuild
descends into scripts/kconfig/, so it contains the target compiler
version correctly.
include/config/auto.conf.cmd references $(CC_VERSION_TEXT) as well,
so it must be included after arch/$(SRCARCH)/Makefile.
Fixes: 21c54b7747 ("kconfig: show compiler version text in the top comment")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Pull networking updates from David Miller:
1) Add Maglev hashing scheduler to IPVS, from Inju Song.
2) Lots of new TC subsystem tests from Roman Mashak.
3) Add TCP zero copy receive and fix delayed acks and autotuning with
SO_RCVLOWAT, from Eric Dumazet.
4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
Brouer.
5) Add ttl inherit support to vxlan, from Hangbin Liu.
6) Properly separate ipv6 routes into their logically independant
components. fib6_info for the routing table, and fib6_nh for sets of
nexthops, which thus can be shared. From David Ahern.
7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
messages from XDP programs. From Nikita V. Shirokov.
8) Lots of long overdue cleanups to the r8169 driver, from Heiner
Kallweit.
9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.
10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.
11) Plumb extack down into fib_rules, from Roopa Prabhu.
12) Add Flower classifier offload support to igb, from Vinicius Costa
Gomes.
13) Add UDP GSO support, from Willem de Bruijn.
14) Add documentation for eBPF helpers, from Quentin Monnet.
15) Add TLS tx offload to mlx5, from Ilya Lesokhin.
16) Allow applications to be given the number of bytes available to read
on a socket via a control message returned from recvmsg(), from
Soheil Hassas Yeganeh.
17) Add x86_32 eBPF JIT compiler, from Wang YanQing.
18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
From Björn Töpel.
19) Remove indirect load support from all of the BPF JITs and handle
these operations in the verifier by translating them into native BPF
instead. From Daniel Borkmann.
20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.
21) Allow XDP programs to do lookups in the main kernel routing tables
for forwarding. From David Ahern.
22) Allow drivers to store hardware state into an ELF section of kernel
dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.
23) Various RACK and loss detection improvements in TCP, from Yuchung
Cheng.
24) Add TCP SACK compression, from Eric Dumazet.
25) Add User Mode Helper support and basic bpfilter infrastructure, from
Alexei Starovoitov.
26) Support ports and protocol values in RTM_GETROUTE, from Roopa
Prabhu.
27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
Brouer.
28) Add lots of forwarding selftests, from Petr Machata.
29) Add generic network device failover driver, from Sridhar Samudrala.
* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
strparser: Add __strp_unpause and use it in ktls.
rxrpc: Fix terminal retransmission connection ID to include the channel
net: hns3: Optimize PF CMDQ interrupt switching process
net: hns3: Fix for VF mailbox receiving unknown message
net: hns3: Fix for VF mailbox cannot receiving PF response
bnx2x: use the right constant
Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
enic: fix UDP rss bits
netdev-FAQ: clarify DaveM's position for stable backports
rtnetlink: validate attributes in do_setlink()
mlxsw: Add extack messages for port_{un, }split failures
netdevsim: Add extack error message for devlink reload
devlink: Add extack to reload and port_{un, }split operations
net: metrics: add proper netlink validation
ipmr: fix error path when ipmr_new_table fails
ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
net: hns3: remove unused hclgevf_cfg_func_mta_filter
netfilter: provide udp*_lib_lookup for nf_tproxy
qed*: Utilize FW 8.37.2.0
...
Kconfig now supports new functionality to perform textual substitution.
It has been a while since Linus suggested to move compiler option tests
from makefiles to Kconfig. Finally, here it is. The implementation has
been generalized into a Make-like macro language. Some built-in functions
such as 'shell' are provided. Variables and user-defined functions are
also supported so that 'cc-option', 'ld-option', etc. are implemented as
macros.
Summary:
- refactor package checks for building {m,n,q,g}conf
- remove unused/unmaintained localization support
- remove Kbuild cache
- drop CONFIG_CROSS_COMPILE support
- replace 'option env=' with direct variable expansion
- add built-in functions such as 'shell'
- support variables and user-defined functions
- add helper macros as as 'cc-option'
- add unit tests and a document of the new macro language
- add 'testconfig' to help
- fix warnings from GCC 8.1
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=o37+
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
"Kconfig now supports new functionality to perform textual
substitution. It has been a while since Linus suggested to move
compiler option tests from makefiles to Kconfig. Finally, here it is.
The implementation has been generalized into a Make-like macro
language.
Some built-in functions such as 'shell' are provided. Variables and
user-defined functions are also supported so that 'cc-option',
'ld-option', etc. are implemented as macros.
Summary:
- refactor package checks for building {m,n,q,g}conf
- remove unused/unmaintained localization support
- remove Kbuild cache
- drop CONFIG_CROSS_COMPILE support
- replace 'option env=' with direct variable expansion
- add built-in functions such as 'shell'
- support variables and user-defined functions
- add helper macros as as 'cc-option'
- add unit tests and a document of the new macro language
- add 'testconfig' to help
- fix warnings from GCC 8.1"
* tag 'kconfig-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kconfig: Avoid format overflow warning from GCC 8.1
kbuild: Move last word of nconfig help to the previous line
kconfig: Add testconfig into make help output
kconfig: add basic helper macros to scripts/Kconfig.include
kconfig: show compiler version text in the top comment
kconfig: test: add Kconfig macro language tests
Documentation: kconfig: document a new Kconfig macro language
kconfig: error out if a recursive variable references itself
kconfig: add 'filename' and 'lineno' built-in variables
kconfig: add 'info', 'warning-if', and 'error-if' built-in functions
kconfig: expand lefthand side of assignment statement
kconfig: support append assignment operator
kconfig: support simply expanded variable
kconfig: support user-defined function and recursively expanded variable
kconfig: begin PARAM state only when seeing a command keyword
kconfig: replace $(UNAME_RELEASE) with function call
kconfig: add 'shell' built-in function
kconfig: add built-in function support
kconfig: make default prompt of mainmenu less specific
kconfig: remove sym_expand_string_value()
...
- improve fixdep to coalesce consecutive slashes in dep-files
- fix some issues of the maintainer string generation in deb-pkg script
- remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up
several tools and linker scripts
- clean-up modpost
- allow to enable the dead code/data elimination for PowerPC in EXPERT mode
- improve two coccinelle scripts for better performance
- pass endianness and machine size flags to sparse for all architecture
- misc fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2LYT
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- improve fixdep to coalesce consecutive slashes in dep-files
- fix some issues of the maintainer string generation in deb-pkg script
- remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up
several tools and linker scripts
- clean-up modpost
- allow to enable the dead code/data elimination for PowerPC in EXPERT
mode
- improve two coccinelle scripts for better performance
- pass endianness and machine size flags to sparse for all architecture
- misc fixes
* tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: add machine size to CHECKFLAGS
kbuild: add endianness flag to CHEKCFLAGS
kbuild: $(CHECK) doesnt need NOSTDINC_FLAGS twice
scripts: Fixed printf format mismatch
scripts/tags.sh: use `find` for $ALLSOURCE_ARCHS generation
coccinelle: deref_null: improve performance
coccinelle: mini_lock: improve performance
powerpc: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selected
kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selectable if enabled
kbuild: LD_DEAD_CODE_DATA_ELIMINATION no -ffunction-sections/-fdata-sections for module build
kbuild: Fix asm-generic/vmlinux.lds.h for LD_DEAD_CODE_DATA_ELIMINATION
modpost: constify *modname function argument where possible
modpost: remove redundant is_vmlinux() test
modpost: use strstarts() helper more widely
modpost: pass struct elf_info pointer to get_modinfo()
checkpatch: remove VMLINUX_SYMBOL() check
vmlinux.lds.h: remove no-op macro VMLINUX_SYMBOL()
kbuild: remove CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX
export.h: remove code for prefixing symbols with underscore
depmod.sh: remove symbol prefix support
...
check that CC can build executables and use that compiler instead of HOSTCC
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
By default, sparse assumes a 64bit machine when compiled on x86-64
and 32bit when compiled on anything else.
This can of course create all sort of problems for the other archs, like
issuing false warnings ('shift too big (32) for type unsigned long'), or
worse, failing to emit legitimate warnings.
Fix this by adding the -m32/-m64 flag, depending on CONFIG_64BIT,
to CHECKFLAGS in the main Makefile (and so for all archs).
Also, remove the now unneeded -m32/-m64 in arch specific Makefiles.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The kernel depends on macros like __BYTE_ORDER__,
__BIG_ENDIAN__ or __LITTLE_ENDIAN__.
OTOH, sparse doesn't know about the endianness of the kernel and
by default uses the same as the machine on which sparse was built.
Ensure that sparse can predefine the macros corresponding to
how the kernel was configured by adding -m{big,little}-endian
to CHECKFLAGS in the main Makefile (and so for all archs).
Also, remove the equivalent done in arch specific Makefiles.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, $(CHECK) receives NOSTDINC_FLAGS twice:
* first directly in the main Makefile via CHECKFLAGS,
* then indirectly in scripts/Makefile.build via c_flags.
Since once is enough, leave the occurence via c_flags and
remove the one via CHECKFLAGS.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The kernel configuration phase is now tightly coupled with the compiler
in use. It will be nice to show the compiler information in Kconfig.
The compiler information will be displayed like this:
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- config
scripts/kconfig/conf --oldaskconfig Kconfig
*
* Linux/arm64 4.16.0-rc1 Kernel Configuration
*
*
* Compiler: aarch64-linux-gnu-gcc (Linaro GCC 7.2-2017.11) 7.2.1 20171011
*
*
* General setup
*
Compile also drivers which will not load (COMPILE_TEST) [N/y/?]
If you use GUI methods such as menuconfig, it will be displayed in the
top menu.
This is simply implemented by using the 'comment' statement. So, it
will be saved into the .config file as well.
This commit has a very important meaning. If the compiler is upgraded,
Kconfig must be re-run since different compilers have different sets
of supported options.
All referenced environments are written to include/config/auto.conf.cmd
so that any environment change triggers syncconfig, and prompt the user
to input new values if needed.
With this commit, something like follows will be added to
include/config/auto.conf.cmd
ifneq "$(CC_VERSION_TEXT)" "aarch64-linux-gnu-gcc (Linaro GCC 7.2-2017.11) 7.2.1 20171011"
include/config/auto.conf: FORCE
endif
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Now that 'shell' function is supported, this can be self-contained in
Kconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
To get access to environment variables, Kconfig needs to define a
symbol using "option env=" syntax. It is tedious to add a symbol entry
for each environment variable given that we need to define much more
such as 'CC', 'AS', 'srctree' etc. to evaluate the compiler capability
in Kconfig.
Adding '$' for symbol references is grammatically inconsistent.
Looking at the code, the symbols prefixed with 'S' are expanded by:
- conf_expand_value()
This is used to expand 'arch/$ARCH/defconfig' and 'defconfig_list'
- sym_expand_string_value()
This is used to expand strings in 'source' and 'mainmenu'
All of them are fixed values independent of user configuration. So,
they can be changed into the direct expansion instead of symbols.
This change makes the code much cleaner. The bounce symbols 'SRCARCH',
'ARCH', 'SUBARCH', 'KERNELVERSION' are gone.
sym_init() hard-coding 'UNAME_RELEASE' is also gone. 'UNAME_RELEASE'
should be replaced with an environment variable.
ARCH_DEFCONFIG is a normal symbol, so it should be simply referenced
without '$' prefix.
The new syntax is addicted by Make. The variable reference needs
parentheses, like $(FOO), but you can omit them for single-letter
variables, like $F. Yet, in Makefiles, people tend to use the
parenthetical form for consistency / clarification.
At this moment, only the environment variable is supported, but I will
extend the concept of 'variable' later on.
The variables are expanded in the lexer so we can simplify the token
handling on the parser side.
For example, the following code works.
[Example code]
config MY_TOOLCHAIN_LIST
string
default "My tools: CC=$(CC), AS=$(AS), CPP=$(CPP)"
[Result]
$ make -s alldefconfig && tail -n 1 .config
CONFIG_MY_TOOLCHAIN_LIST="My tools: CC=gcc, AS=as, CPP=gcc -E"
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Kbuild provides a couple of ways to specify CROSS_COMPILE:
[1] Command line
[2] Environment
[3] arch/*/Makefile (only some architectures)
[4] CONFIG_CROSS_COMPILE
[4] is problematic for the compiler capability tests in Kconfig.
CONFIG_CROSS_COMPILE allows users to change the compiler prefix from
'make menuconfig', etc. It means, the compiler options would have
to be all re-calculated everytime CONFIG_CROSS_COMPILE is changed.
To avoid complexity and performance issues, I'd like to evaluate
the shell commands statically, i.e. only parsing Kconfig files.
I guess the majority is [1] or [2]. Currently, there are only
5 defconfig files that specify CONFIG_CROSS_COMPILE.
arch/arm/configs/lpc18xx_defconfig
arch/hexagon/configs/comet_defconfig
arch/nds32/configs/defconfig
arch/openrisc/configs/or1ksim_defconfig
arch/openrisc/configs/simple_smp_defconfig
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
The kbuild cache was introduced to remember the result of shell
commands, some of which are expensive to compute, such as
$(call cc-option,...).
However, this turned out not so clever as I had first expected.
Actually, it is problematic. For example, "$(CC) -print-file-name"
is cached. If the compiler is updated, the stale search path causes
build error, which is difficult to figure out. Another problem
scenario is cache files could be touched while install targets are
running under the root permission. We can patch them if desired,
but the build infrastructure is getting uglier and uglier.
Now, we are going to move compiler flag tests to the configuration
phase. If this is completed, the result of compiler tests will be
naturally cached in the .config file. We will not have performance
issues of incremental building since this testing only happens at
Kconfig time.
To start this work with a cleaner code base, remove the kbuild
cache first.
Revert the following commits:
Commit 9a234a2e38 ("kbuild: create directory for make cache only when necessary")
Commit e17c400ae1 ("kbuild: shrink .cache.mk when it exceeds 1000 lines")
Commit 4e56207130 ("kbuild: Cache a few more calls to the compiler")
Commit 3298b690b2 ("kbuild: Add a cache for generated variables")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
- enable -fno-tree-loop-im only when supported
- add -fno-PIE option before the asm-goto test
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=r3P/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild fixes from Masahiro Yamada:
- enable '-fno-tree-loop-im' only when supported
- add '-fno-PIE' option before the asm-goto test
* tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Makefile: disable PIE before testing asm goto
kbuild: gcov: enable -fno-tree-loop-im if supported
Modules do not tend to cope with -ffunction-sections, even though they
do not link with -gc-sections. It may be possible for unused symbols to
be trimmed from modules, but in general that would take much more work
in architecture module linker scripts.
For now, enable these only for kernel build.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG.
They were removed by commit 4ba66a9760 ("arch: remove blackfin port"),
commit bb6fb6dfcc ("metag: Remove arch/metag/"), respectively.
No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX,
hence the last argument of scripts/depmod.sh can be removed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Since commit e501ce957a ("x86: Force asm-goto"), aarch64 build on
distributions which enable PIE by default (e.g. openSUSE Tumbleweed) does
not detect support for asm goto correctly. The problem is that ARM specific
part of scripts/gcc-goto.sh fails with PIE even with recent gcc versions.
Moving the asm goto detection up in Makefile put it before the place where
we disable PIE. As a result, kernel is built without jump label support.
Move the lines disabling PIE before the asm goto test to make it work.
Fixes: e501ce957a ("x86: Force asm-goto")
Reported-by: Andreas Faerber <afaerber@suse.com>
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Clang does not recognize this compiler option.
Reported-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The __FILE__ macro is used everywhere in the kernel to locate the file
printing the log message, such as WARN_ON(), etc. If the kernel is
built out of tree, this can be a long absolute path, like this:
WARNING: CPU: 1 PID: 1 at /path/to/build/directory/arch/arm64/kernel/foo.c:...
This is because Kbuild runs in the objtree instead of the srctree,
then __FILE__ is expanded to a file path prefixed with $(srctree)/.
Commit 9da0763bdd ("kbuild: Use relative path when building in a
subdir of the source tree") improved this to some extent; $(srctree)
becomes ".." if the objtree is a child of the srctree.
For other cases of out-of-tree build, __FILE__ is still the absolute
path. It also means the kernel image depends on where it was built.
A brand-new option from GCC, -fmacro-prefix-map, solves this problem.
If your compiler supports it, __FILE__ is the relative path from the
srctree regardless of O= option. This provides more readable log and
more reproducible builds.
Please note __FILE__ is always an absolute path for external modules.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Our convention is to distinguish file types by suffixes with a period
as a separator.
*-asn1.[ch] is a different pattern from other generated sources such
as *.lex.c, *.tab.[ch], *.dtb.S, etc. More confusing, files with
'-asn1.[ch]' are generated files, but '_asn1.[ch]' are checked-in
files:
net/netfilter/nf_conntrack_h323_asn1.c
include/linux/netfilter/nf_conntrack_h323_asn1.h
include/linux/sunrpc/gss_asn1.h
Rename generated files to *.asn1.[ch] for consistency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Files suffixed by .lex.c, .tab.[ch] are generated lexers, parsers,
respectively. Clean them up globally from the top Makefile.
Some of the final host programs those lexer/parser are linked into
are necessary for building external modules, but the intermediates
are unneeded. They can be cleaned away by 'make clean' instead of
'make mrproper'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
- improve checkpatch for more precise Kconfig code checking
- clarify effective selects by grouping reverse dependencies in help
- do not write out '# CONFIG_FOO is not set' from invisible symbols
- make oldconfig as silent as it should be
- rename 'silentoldconfig' to 'syncconfig'
- add unit-test framework and several test cases
- warn unmet dependency of tristate symbols
- make unmet dependency warnings readable, removing false positives
- improve recursive include detection
- use yylineno to simplify the line number tracking
- misc cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=sKto
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- improve checkpatch for more precise Kconfig code checking
- clarify effective selects by grouping reverse dependencies in help
- do not write out '# CONFIG_FOO is not set' from invisible symbols
- make oldconfig as silent as it should be
- rename 'silentoldconfig' to 'syncconfig'
- add unit-test framework and several test cases
- warn unmet dependency of tristate symbols
- make unmet dependency warnings readable, removing false positives
- improve recursive include detection
- use yylineno to simplify the line number tracking
- misc cleanups
* tag 'kconfig-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kconfig: use yylineno option instead of manual lineno increments
kconfig: detect recursive inclusion earlier
kconfig: remove duplicated file name and lineno of recursive inclusion
kconfig: do not include both curses.h and ncurses.h for nconfig
kconfig: make unmet dependency warnings readable
kconfig: warn unmet direct dependency of tristate symbols selected by y
kconfig: tests: test if recursive inclusion is detected
kconfig: tests: test if recursive dependencies are detected
kconfig: tests: test randconfig for choice in choice
kconfig: tests: test defconfig when two choices interact
kconfig: tests: check visibility of tristate choice values in y choice
kconfig: tests: check unneeded "is not set" with unmet dependency
kconfig: tests: test if new symbols in choice are asked
kconfig: tests: test automatic submenu creation
kconfig: tests: add basic choice tests
kconfig: tests: add framework for Kconfig unit testing
kbuild: add PYTHON2 and PYTHON3 variables
kconfig: remove redundant streamline_config.pl prerequisite
kconfig: rename silentoldconfig to syncconfig
kconfig: invoke oldconfig instead of silentoldconfig from local*config
...
- add a shell script to get Clang version
- improve portability of build scripts
- drop always-enabled CONFIG_THIN_ARCHIVE and remove unused code
- rename built-in.o which is now thin archive to built-in.a
- process clean/build targets one by one to get along with -j option
- simplify ld-option
- improve building with CONFIG_TRIM_UNUSED_KSYMS
- define KBUILD_MODNAME even for objects shared among multiple modules
- avoid linking multiple instances of same objects from composite objects
- move <linux/compiler_types.h> to c_flags to include it only for C files
- clean-up various Makefiles
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJaw6eWAAoJED2LAQed4NsGrK8QAJmbYg83TTNoOgQRK/7Lg+sj
KL1+RGFxmdHRVOqG5n18L7Q4LmTD19tUFNQImrQTTrKrbH2vbMSTF2PfzdmDRwMz
R5vW5+wsagfhSttOce/GR4p9+bM9XEclzEa3liqNVQxijOFXmkV14pn0x5anYfeB
ABthxFFHcVn3exP/q3lmq048x1yNE71wUU5WQIWf6V/ZKf+++wQU8r7HpnATWYeO
vtf8gZq+xyLLjhxoJF6n6olSZXI7Yhz4jV2G68/VroS312AUFWPogK+cSshWGlSw
zGixM1q55oj9CXjZ37nR6pTzQhSZLf/uHX5beatlpeoJ4Hho6HlIABvx2oEnat7b
o5RW64RB0gVJqlYZdKxL29HNrovr9tlWPTaIPGFRvWDpl3c1w+rMKXE+5hwu8jMJ
2jgxd5FZCgBaDsAKojmeQR7PAo2ffAdUO0Dj/SuAaMOpuHWHcnJk9kIN2PUrC+Sf
d/H2soT9x+60KbQmtCEo5VfEN8bvNP3+ZSnadEG/gRN2IIa5FZAUQykU+i50gAvj
tuKAokdRGZHvXM+buYFBfN6RbhVCXzBF/fAG7r37QVR2u1zaUszmgFOUqERhTQfm
RNnyeAs9G9rljtna/AD7cIOdKTg8oETPISxt8Y6EzNMpI8PhF0aGoxso3yD19oH1
M+fq55RigsR48Kic40hY
=N5BL
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- add a shell script to get Clang version
- improve portability of build scripts
- drop always-enabled CONFIG_THIN_ARCHIVE and remove unused code
- rename built-in.o which is now thin archive to built-in.a
- process clean/build targets one by one to get along with -j option
- simplify ld-option
- improve building with CONFIG_TRIM_UNUSED_KSYMS
- define KBUILD_MODNAME even for objects shared among multiple modules
- avoid linking multiple instances of same objects from composite
objects
- move <linux/compiler_types.h> to c_flags to include it only for C
files
- clean-up various Makefiles
* tag 'kbuild-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits)
kbuild: get <linux/compiler_types.h> out of <linux/kconfig.h>
kbuild: clean up link rule of composite modules
kbuild: clean up archive rule of built-in.a
kbuild: remove partial section mismatch detection for built-in.a
net: liquidio: clean up Makefile for simpler composite object handling
lib: zstd: clean up Makefile for simpler composite object handling
kbuild: link $(real-obj-y) instead of $(obj-y) into built-in.a
kbuild: rename real-objs-y/m to real-obj-y/m
kbuild: move modname and modname-multi close to modname_flags
kbuild: simplify modname calculation
kbuild: fix modname for composite modules
kbuild: define KBUILD_MODNAME even if multiple modules share objects
kbuild: remove unnecessary $(subst $(obj)/, , ...) in modname-multi
kbuild: Use ls(1) instead of stat(1) to obtain file size
kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS
kbuild: move include/config/ksym/* to include/ksym/*
kbuild: move CONFIG_TRIM_UNUSED_KSYMS code unneeded for external module
kbuild: restore autoksyms.h touch to the top Makefile
kbuild: move 'scripts' target below
kbuild: remove wrong 'touch' in adjust_autoksyms.sh
...
This removes the entire architecture code for blackfin, cris, frv, m32r,
metag, mn10300, score, and tile, including the associated device drivers.
I have been working with the (former) maintainers for each one to ensure
that my interpretation was right and the code is definitely unused in
mainline kernels. Many had fond memories of working on the respective
ports to start with and getting them included in upstream, but also saw
no point in keeping the port alive without any users.
In the end, it seems that while the eight architectures are extremely
different, they all suffered the same fate: There was one company
in charge of an SoC line, a CPU microarchitecture and a software
ecosystem, which was more costly than licensing newer off-the-shelf
CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems
that all the SoC product lines are still around, but have not used the
custom CPU architectures for several years at this point. In contrast,
CPU instruction sets that remain popular and have actively maintained
kernel ports tend to all be used across multiple licensees.
The removal came out of a discussion that is now documented at
https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
marking any ports as deprecated but remove them all at once after I made
sure that they are all unused. Some architectures (notably tile, mn10300,
and blackfin) are still being shipped in products with old kernels,
but those products will never be updated to newer kernel releases.
After this series, we still have a few architectures without mainline
gcc support:
- unicore32 and hexagon both have very outdated gcc releases, but the
maintainers promised to work on providing something newer. At least
in case of hexagon, this will only be llvm, not gcc.
- openrisc, risc-v and nds32 are still in the process of finishing their
support or getting it added to mainline gcc in the first place.
They all have patched gcc-7.3 ports that work to some degree, but
complete upstream support won't happen before gcc-8.1. Csky posted
their first kernel patch set last week, their situation will be similar.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fQ8z
-----END PGP SIGNATURE-----
Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pul removal of obsolete architecture ports from Arnd Bergmann:
"This removes the entire architecture code for blackfin, cris, frv,
m32r, metag, mn10300, score, and tile, including the associated device
drivers.
I have been working with the (former) maintainers for each one to
ensure that my interpretation was right and the code is definitely
unused in mainline kernels. Many had fond memories of working on the
respective ports to start with and getting them included in upstream,
but also saw no point in keeping the port alive without any users.
In the end, it seems that while the eight architectures are extremely
different, they all suffered the same fate: There was one company in
charge of an SoC line, a CPU microarchitecture and a software
ecosystem, which was more costly than licensing newer off-the-shelf
CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
seems that all the SoC product lines are still around, but have not
used the custom CPU architectures for several years at this point. In
contrast, CPU instruction sets that remain popular and have actively
maintained kernel ports tend to all be used across multiple licensees.
[ See the new nds32 port merged in the previous commit for the next
generation of "one company in charge of an SoC line, a CPU
microarchitecture and a software ecosystem" - Linus ]
The removal came out of a discussion that is now documented at
https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
marking any ports as deprecated but remove them all at once after I
made sure that they are all unused. Some architectures (notably tile,
mn10300, and blackfin) are still being shipped in products with old
kernels, but those products will never be updated to newer kernel
releases.
After this series, we still have a few architectures without mainline
gcc support:
- unicore32 and hexagon both have very outdated gcc releases, but the
maintainers promised to work on providing something newer. At least
in case of hexagon, this will only be llvm, not gcc.
- openrisc, risc-v and nds32 are still in the process of finishing
their support or getting it added to mainline gcc in the first
place. They all have patched gcc-7.3 ports that work to some
degree, but complete upstream support won't happen before gcc-8.1.
Csky posted their first kernel patch set last week, their situation
will be similar
[ Palmer Dabbelt points out that RISC-V support is in mainline gcc
since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]"
This really says it all:
2498 files changed, 95 insertions(+), 467668 deletions(-)
* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
MAINTAINERS: UNICORE32: Change email account
staging: iio: remove iio-trig-bfin-timer driver
tty: hvc: remove tile driver
tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
serial: remove tile uart driver
serial: remove m32r_sio driver
serial: remove blackfin drivers
serial: remove cris/etrax uart drivers
usb: Remove Blackfin references in USB support
usb: isp1362: remove blackfin arch glue
usb: musb: remove blackfin port
usb: host: remove tilegx platform glue
pwm: remove pwm-bfin driver
i2c: remove bfin-twi driver
spi: remove blackfin related host drivers
watchdog: remove bfin_wdt driver
can: remove bfin_can driver
mmc: remove bfin_sdh driver
input: misc: remove blackfin rotary driver
input: keyboard: remove bf54x driver
...
Pull x86 build updates from Ingo Molnar:
"The biggest change is the forcing of asm-goto support on x86, which
effectively increases the GCC minimum supported version to gcc-4.5 (on
x86)"
* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Don't pass in -D__KERNEL__ multiple times
x86: Remove FAST_FEATURE_TESTS
x86: Force asm-goto
x86/build: Drop superfluous ALIGN from the linker script
- fix missed rebuild of TRIM_UNUSED_KSYMS
- fix rpm-pkg for GNU tar >= 1.29
- include scripts/dtc/include-prefixes/* to kernel header deb-pkg
- add -no-integrated-as option ealier to fix building with Clang
- fix netfilter Makefile for parallel building
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2WPN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix missed rebuild of TRIM_UNUSED_KSYMS
- fix rpm-pkg for GNU tar >= 1.29
- include scripts/dtc/include-prefixes/* to kernel header deb-pkg
- add -no-integrated-as option ealier to fix building with Clang
- fix netfilter Makefile for parallel building
* tag 'kbuild-fixes-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
netfilter: nf_nat_snmp_basic: add correct dependency to Makefile
kbuild: rpm-pkg: Support GNU tar >= 1.29
builddeb: Fix header package regarding dtc source links
kbuild: set no-integrated-as before incl. arch Makefile
kbuild: make scripts/adjust_autoksyms.sh robust against timestamp races
The variable 'PYTHON' allows users to specify a proper executable
name in case the default 'python' does not work. However, this does
not address the case where both Python 2.x and 3.x scripts are used
in one source tree.
PEP 394 (https://www.python.org/dev/peps/pep-0394/) provides a
convention for Python scripts portability. Here is a quotation:
In order to tolerate differences across platforms, all new code
that needs to invoke the Python interpreter should not specify
'python', but rather should specify either 'python2' or 'python3'.
This distinction should be made in shebangs, when invoking from a
shell script, when invoking via the system() call, or when invoking
in any other context.
One exception to this is scripts that are deliberately written to
be source compatible with both Python 2.x and 3.x. Such scripts may
continue to use python on their shebang line without affecting their
portability.
To meet this requirement, this commit adds new variables 'PYTHON2'
and 'PYTHON3'.
arch/ia64/scripts/unwcheck.py is the only script that has ever used
$(PYTHON). Recent commit bd5edbe677 ("ia64: convert unwcheck.py to
python3") converted it to be compatible with both Python 2.x and 3.x,
so this is the exceptional case where the use of 'python' is allowed.
So, I did not touch arch/ia64/Makefile.
tools/perf/Makefile.config sets PYTHON and PYTHON2 by itself, so it
is not affected by this commit.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
As commit cedd55d49d ("kconfig: Remove silentoldconfig from help
and docs; fix kconfig/conf's help") mentioned, 'silentoldconfig' is a
historical misnomer. That commit removed it from help and docs since
it is an internal interface. If so, it should be allowed to rename
it to something more intuitive. 'syncconfig' is the one I came up
with because it updates the .config if necessary, then synchronize
include/generated/autoconf.h and include/config/* with it.
You should not manually invoke 'silentoldcofig'. Display warning if
used in case existing scripts are doing wrong.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
If CONFIG_TRIM_UNUSED_KSYMS is enabled and the kernel is built from
a pristine state, the vmlinux is linked twice.
[1] A user runs 'make'
[2] First build with empty autoksyms.h
[3] adjust_autoksyms.sh updates autoksyms.h and recurses 'make vmlinux'
--------(begin sub-make)--------
[4] Second build with new autoksyms.h
[5] link-vmlinux.sh is invoked because vmlinux is missing
---------(end sub-make)---------
[6] link-vmlinux.sh is invoked again despite vmlinux is up-to-date.
The reason of [6] is probably because Make already decided to update
vmlinux at the time of [2] because vmlinux was missing when Make
built up the dependency graph.
Because if_changed is implemented based on $?, this issue can be
narrowed down to how Make handles $?.
You can test it with the following simple code:
[Test Makefile]
A: B
@echo newer prerequisite: $?
cp B A
B: C
cp C B
touch A
[Result]
$ rm -f A B
$ touch C
$ make
cp C B
touch A
newer prerequisite: B
cp B A
Here, 'A' has been touched in the recipe of 'B'. So, the dependency
'A: B' has already been met before the recipe of 'A' is executed.
However, Make does not notice the fact that the recipe of 'B' also
updates 'A' as a side-effect.
The situation is similar in this case; the vmlinux has actually been
updated in the vmlinux_prereq target. Make cannot predict this, so
judges the vmlinux is old.
link-vmlinux.sh is costly, so it is better to not run it when unneeded.
Split CONFIG_TRIM_UNUSED_KSYMS recursion to a dedicated target.
The reason of commit 2441e78b19 ("kbuild: better abstract vmlinux
sequential prerequisites") was to cater to CONFIG_BUILD_DOCSRC, but
it was later removed by commit 1848929251 ("samples: move blackfin
gptimers-example from Documentation").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
The idea of using fixdep was inspired by Kconfig, but autoksyms
belongs to a different group. So, I want to move those touched
files under include/config/ksym/ to include/ksym/.
The directory include/ksym/ can be removed by 'make clean' because
it is meaningless for the external module building.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
The external module building does not need to parse this code because
KBUILD_MODULES is always set anyway.
Move this code inside the "ifeq ($(KBUILD_EXTMOD),) ... endif" block.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Commit d3fc425e81 ("kbuild: make sure autoksyms.h exists early")
moved the code that touches autoksyms.h to scripts/kconfig/Makefile
with obscure reason.
From Nicolas' comment [1], he did not seem to be sure about the root
cause.
I guess I figured it out, so here is a fix-up I think is more correct.
According to the error log in the original post [2], the build failed
in scripts/mod/devicetable-offsets.c
scripts/mod/Makefile is descended from scripts/Makefile, which is
invoked from the top-level Makefile by the 'scripts' target.
To build vmlinux and/or modules, Kbuild descend into $(vmlinux-dirs).
This depends on 'prepare' and 'scripts' as follows:
$(vmlinux-dirs): prepare scripts
Because there is no dependency between 'prepare' and 'scripts', the
parallel building can execute them simultaneously.
'prepare' depends on 'prepare1', which touched autoksyms.h, while
'scripts' descends into script/, then scripts/mod/, which needs
<generated/autoksyms.h> if CONFIG_TRIM_UNUSED_KSYMS. It was the
reason of the race.
I am not happy to have unrelated code in the Kconfig Makefile, so
getting it back to the top Makefile.
I removed the standalone test target because I want to use it to
create an empty autoksyms.h file. Here is a little improvement;
unnecessary autoksyms.h is not created when CONFIG_TRIM_UNUSED_KSYMS
is disabled.
[1] https://lkml.org/lkml/2016/11/30/734
[2] https://lkml.org/lkml/2016/11/30/531
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Just a trivial change to prepare for the next commit.
This target is still invisible from external module building.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently LDFLAGS is not cleared, so same flags are accumulated in
LDFLAGS when the top Makefile is recursively invoked.
I found unneeded rebuild for ARCH=arm64 when CONFIG_TRIM_UNUSED_KSYMS
is enabled. If include/generated/autoksyms.h is updated, the top
Makefile is recursively invoked, then arch/arm64/Makefile adds one
more '-maarch64linux'. Due to the command line change, modules are
rebuilt needlessly.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Support parallel building of clean, config, and build targets in a
single command.
For example,
make -j<N> clean all
or
make -j<N> mrproper defconfig all
They should be handled one by one.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Incremental linking is gone, so rename built-in.o to built-in.a, which
is the usual extension for archive files.
This patch does two things, first is a simple search/replace:
git grep -l 'built-in\.o' | xargs sed -i 's/built-in\.o/built-in\.a/g'
The second is to invert nesting of nested text manipulations to avoid
filtering built-in.a out from libs-y2:
-libs-y2 := $(filter-out %.a, $(patsubst %/, %/built-in.a, $(libs-y)))
+libs-y2 := $(patsubst %/, %/built-in.a, $(filter-out %.a, $(libs-y)))
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Pull networking fixes from David Miller:
1) Always validate XFRM esn replay attribute, from Florian Westphal.
2) Fix RCU read lock imbalance in xfrm_get_tos(), from Xin Long.
3) Don't try to get firmware dump if not loaded in iwlwifi, from Shaul
Triebitz.
4) Fix BPF helpers to deal with SCTP GSO SKBs properly, from Daniel
Axtens.
5) Fix some interrupt handling issues in e1000e driver, from Benjamin
Poitier.
6) Use strlcpy() in several ethtool get_strings methods, from Florian
Fainelli.
7) Fix rhlist dup insertion, from Paul Blakey.
8) Fix SKB leak in netem packet scheduler, from Alexey Kodanev.
9) Fix driver unload crash when link is up in smsc911x, from Jeremy
Linton.
10) Purge out invalid socket types in l2tp_tunnel_create(), from Eric
Dumazet.
11) Need to purge the write queue when TCP connections are aborted,
otherwise userspace using MSG_ZEROCOPY can't close the fd. From
Soheil Hassas Yeganeh.
12) Fix double free in error path of team driver, from Arkadi
Sharshevsky.
13) Filter fixes for hv_netvsc driver, from Stephen Hemminger.
14) Fix non-linear packet access in ipv6 ndisc code, from Lorenzo
Bianconi.
15) Properly filter out unsupported feature flags in macvlan driver,
from Shannon Nelson.
16) Don't request loading the diag module for a protocol if the protocol
itself is not even registered. From Xin Long.
17) If datagram connect fails in ipv6, make sure the socket state is
consistent afterwards. From Paolo Abeni.
18) Use after free in qed driver, from Dan Carpenter.
19) If received ipv4 PMTU is less than the min pmtu, lock the mtu in the
entry. From Sabrina Dubroca.
20) Fix sleep in atomic in tg3 driver, from Jonathan Toppins.
21) Fix vlan in vlan untagging in some situations, from Toshiaki Makita.
22) Fix double SKB free in genlmsg_mcast(). From Nicolas Dichtel.
23) Fix NULL derefs in error paths of tcf_*_init(), from Davide Caratti.
24) Unbalanced PM runtime calls in FEC driver, from Florian Fainelli.
25) Memory leak in gemini driver, from Igor Pylypiv.
26) IDR leaks in error paths of tcf_*_init() functions, from Davide
Caratti.
27) Need to use GFP_ATOMIC in seg6_build_state(), from David Lebrun.
28) Missing dev_put() in error path of macsec_newlink(), from Dan
Carpenter.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (201 commits)
macsec: missing dev_put() on error in macsec_newlink()
net: dsa: Fix functional dsa-loop dependency on FIXED_PHY
hv_netvsc: common detach logic
hv_netvsc: change GPAD teardown order on older versions
hv_netvsc: use RCU to fix concurrent rx and queue changes
hv_netvsc: disable NAPI before channel close
net/ipv6: Handle onlink flag with multipath routes
ppp: avoid loop in xmit recursion detection code
ipv6: sr: fix NULL pointer dereference when setting encap source address
ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state
net: aquantia: driver version bump
net: aquantia: Implement pci shutdown callback
net: aquantia: Allow live mac address changes
net: aquantia: Add tx clean budget and valid budget handling logic
net: aquantia: Change inefficient wait loop on fw data reads
net: aquantia: Fix a regression with reset on old firmware
net: aquantia: Fix hardware reset when SPI may rarely hangup
s390/qeth: on channel error, reject further cmd requests
s390/qeth: lock read device while queueing next buffer
s390/qeth: when thread completes, wake up all waiters
...
In order to make sure compiler flag detection for ARM works
correctly the no-integrated-as flags need to be set before
including the arch specific Makefile.
Fixes: cfe17c9bbe ("kbuild: move cc-option and cc-disable-warning after incl. arch Makefile")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Prasad reported that he has seen crashes in BPF subsystem with netd
on Android with arm64 in the form of (note, the taint is unrelated):
[ 4134.721483] Unable to handle kernel paging request at virtual address 800000001
[ 4134.820925] Mem abort info:
[ 4134.901283] Exception class = DABT (current EL), IL = 32 bits
[ 4135.016736] SET = 0, FnV = 0
[ 4135.119820] EA = 0, S1PTW = 0
[ 4135.201431] Data abort info:
[ 4135.301388] ISV = 0, ISS = 0x00000021
[ 4135.359599] CM = 0, WnR = 0
[ 4135.470873] user pgtable: 4k pages, 39-bit VAs, pgd = ffffffe39b946000
[ 4135.499757] [0000000800000001] *pgd=0000000000000000, *pud=0000000000000000
[ 4135.660725] Internal error: Oops: 96000021 [#1] PREEMPT SMP
[ 4135.674610] Modules linked in:
[ 4135.682883] CPU: 5 PID: 1260 Comm: netd Tainted: G S W 4.14.19+ #1
[ 4135.716188] task: ffffffe39f4aa380 task.stack: ffffff801d4e0000
[ 4135.731599] PC is at bpf_prog_add+0x20/0x68
[ 4135.741746] LR is at bpf_prog_inc+0x20/0x2c
[ 4135.751788] pc : [<ffffff94ab7ad584>] lr : [<ffffff94ab7ad638>] pstate: 60400145
[ 4135.769062] sp : ffffff801d4e3ce0
[...]
[ 4136.258315] Process netd (pid: 1260, stack limit = 0xffffff801d4e0000)
[ 4136.273746] Call trace:
[...]
[ 4136.442494] 3ca0: ffffff94ab7ad584 0000000060400145 ffffffe3a01bf8f8 0000000000000006
[ 4136.460936] 3cc0: 0000008000000000 ffffff94ab844204 ffffff801d4e3cf0 ffffff94ab7ad584
[ 4136.479241] [<ffffff94ab7ad584>] bpf_prog_add+0x20/0x68
[ 4136.491767] [<ffffff94ab7ad638>] bpf_prog_inc+0x20/0x2c
[ 4136.504536] [<ffffff94ab7b5d08>] bpf_obj_get_user+0x204/0x22c
[ 4136.518746] [<ffffff94ab7ade68>] SyS_bpf+0x5a8/0x1a88
Android's netd was basically pinning the uid cookie BPF map in BPF
fs (/sys/fs/bpf/traffic_cookie_uid_map) and later on retrieving it
again resulting in above panic. Issue is that the map was wrongly
identified as a prog! Above kernel was compiled with clang 4.0,
and it turns out that clang decided to merge the bpf_prog_iops and
bpf_map_iops into a single memory location, such that the two i_ops
could then not be distinguished anymore.
Reason for this miscompilation is that clang has the more aggressive
-fmerge-all-constants enabled by default. In fact, clang source code
has a comment about it in lib/AST/ExprConstant.cpp on why it is okay
to do so:
Pointers with different bases cannot represent the same object.
(Note that clang defaults to -fmerge-all-constants, which can
lead to inconsistent results for comparisons involving the address
of a constant; this generally doesn't matter in practice.)
The issue never appeared with gcc however, since gcc does not enable
-fmerge-all-constants by default and even *explicitly* states in
it's option description that using this flag results in non-conforming
behavior, quote from man gcc:
Languages like C or C++ require each variable, including multiple
instances of the same variable in recursive calls, to have distinct
locations, so using this option results in non-conforming behavior.
There are also various clang bug reports open on that matter [1],
where clang developers acknowledge the non-conforming behavior,
and refer to disabling it with -fno-merge-all-constants. But even
if this gets fixed in clang today, there are already users out there
that triggered this. Thus, fix this issue by explicitly adding
-fno-merge-all-constants to the kernel's Makefile to generically
disable this optimization, since potentially other places in the
kernel could subtly break as well.
Note, there is also a flag called -fmerge-constants (not supported
by clang), which is more conservative and only applies to strings
and it's enabled in gcc's -O/-O2/-O3/-Os optimization levels. In
gcc's code, the two flags -fmerge-{all-,}constants share the same
variable internally, so when disabling it via -fno-merge-all-constants,
then we really don't merge any const data (e.g. strings), and text
size increases with gcc (14,927,214 -> 14,942,646 for vmlinux.o).
$ gcc -fverbose-asm -O2 foo.c -S -o foo.S
-> foo.S lists -fmerge-constants under options enabled
$ gcc -fverbose-asm -O2 -fno-merge-all-constants foo.c -S -o foo.S
-> foo.S doesn't list -fmerge-constants under options enabled
$ gcc -fverbose-asm -O2 -fno-merge-all-constants -fmerge-constants foo.c -S -o foo.S
-> foo.S lists -fmerge-constants under options enabled
Thus, as a workaround we need to set both -fno-merge-all-constants
*and* -fmerge-constants in the Makefile in order for text size to
stay as is.
[1] https://bugs.llvm.org/show_bug.cgi?id=18538
Reported-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Richard Smith <richard-llvm@metafoo.co.uk>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: linux-kernel@vger.kernel.org
Tested-by: Prasad Sodagudi <psodagud@codeaurora.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We want to start using asm-goto to guarantee the absence of dynamic
branches (and thus speculation).
A primary prerequisite for this is of course that the compiler
supports asm-goto. This effecively lifts the minimum GCC version to
build an x86 kernel to gcc-4.5.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: torvalds@linux-foundation.org
Link: https://lkml.kernel.org/r/20180319201327.GJ4043@hirez.programming.kicks-ass.net
The Tile architecture port was added by Chris Metcalf in 2010, and
maintained until early 2018 when he orphaned it due to his departure
from Mellanox, and nobody else stepped up to maintain it. The product
line is still around in the form of the BlueField SoC, but no longer
uses the Tile architecture.
There are also still products for sale with Tile-GX SoCs, notably the
Mikrotik CCR router family. The products all use old (linux-3.3) kernels
with lots of patches and won't be upgraded by their manufacturers. There
have been efforts to port both OpenWRT and Debian to these, but both
projects have stalled and are very unlikely to be continued in the future.
Given that we are reasonably sure that nobody is still using the port
with an upstream kernel any more, it seems better to remove it now while
the port is in a good shape than to let it bitrot for a few years first.
Cc: Chris Metcalf <chris.d.metcalf@gmail.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: http://www.mellanox.com/page/npu_multicore_overview
Link: https://jenkins.debian.net/view/rebootstrap/job/rebootstrap_tilegx_gcc7/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- suppress sparse warnings about unknown attributes
- fix typos and stale comments
- fix build error of arch/sh
- fix wrong use of ld-option vs cc-ldoption
- remove redundant GCC_PLUGINS_CFLAGS assignment
- fix another memory leak of Kconfig
- fix line number in error messages of Kconfig
- do not write confusing CONFIG_DEFCONFIG_LIST out to .config
- add xstrdup() to Kconfig to handle memory shortage errors
- show also a Debian package name if ncurses is missing
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=sr4l
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- suppress sparse warnings about unknown attributes
- fix typos and stale comments
- fix build error of arch/sh
- fix wrong use of ld-option vs cc-ldoption
- remove redundant GCC_PLUGINS_CFLAGS assignment
- fix another memory leak of Kconfig
- fix line number in error messages of Kconfig
- do not write confusing CONFIG_DEFCONFIG_LIST out to .config
- add xstrdup() to Kconfig to handle memory shortage errors
- show also a Debian package name if ncurses is missing
* tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
MAINTAINERS: take over Kconfig maintainership
kconfig: fix line number in recursive inclusion error message
Coccinelle: memdup: Fix typo in warning messages
kconfig: Update ncurses package names for menuconfig
kbuild/kallsyms: trivial typo fix
kbuild: test --build-id linker flag by ld-option instead of cc-ldoption
kbuild: drop superfluous GCC_PLUGINS_CFLAGS assignment
kconfig: Don't leak choice names during parsing
sh: fix build error for empty CONFIG_BUILTIN_DTB_SOURCE
kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_list
kconfig: add xstrdup() helper
kbuild: disable sparse warnings about unknown attributes
Makefile: Fix lying comment re. silentoldconfig
'--build-id' is passed to $(LD), so it should be tested by 'ld-option'.
This seems a kind of misconversion when ld-option was renamed to
cc-ldoption.
Commit f86fd30660 ("kbuild: rename ld-option to cc-ldoption") renamed
all instances of 'ld-option' to 'cc-ldoption'.
Then, commit 691ef3e7fd ("kbuild: introduce ld-option") re-added
'ld-option' as a new implementation.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, sparse issues warnings on code using an attribute
it doesn't know about.
One of the problem with this is that these warnings have no
value for the developer, it's just noise for him. At best these
warnings tell something about some deficiencies of sparse itself
but not about a potential problem with code analyzed.
A second problem with this is that sparse release are, alas,
less frequent than new attributes are added to GCC.
So, avoid the noise by asking sparse to not warn about
attributes it doesn't know about.
Reference: https://marc.info/?l=linux-sparse&m=151871600016790
Reference: https://marc.info/?l=linux-sparse&m=151871725417322
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The comment above the silentoldconfig invocation is outdated.
'make oldconfig' updates just .config and doesn't touch the
include/config/ tree.
This came up in https://lkml.org/lkml/2018/2/12/415.
While fixing the comment, make it more informative by explaining the
purpose of the unfortunately named silentoldconfig.
I can't make sense of the comment re. auto.conf.cmd and a cleaned tree.
include/config/auto.conf and include/config/auto.conf.cmd are both
created simultaneously by silentoldconfig (in
scripts/kconfig/confdata.c, by conf_write_autoconf()), and nothing seems
to remove auto.conf.cmd that wouldn't remove auto.conf. Remove that part
of the comment rather than blindly copying it. It might be a leftover
from an older way of doing things.
The include/config/auto.conf.cmd prerequisite might be there to ensure
that silentoldconfig gets rerun if conf_write_autoconf() fails between
writing out auto.conf.cmd and auto.conf (a comment in the function
indicates that auto.conf is deliberately written out last to mark
completion of the operation). It seems the Makefile dependency between
include/config/auto.conf and .config would already take care of that
though, since include/config/auto.conf would still be out of date re.
.config if the operation fails.
Cop out and leave the prerequisite in for now.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Pull x86 fixes from Thomas Gleixner:
"Yet another pile of melted spectrum related changes:
- sanitize the array_index_nospec protection mechanism: Remove the
overengineered array_index_nospec_mask_check() magic and allow
const-qualified types as index to avoid temporary storage in a
non-const local variable.
- make the microcode loader more robust by properly propagating error
codes. Provide information about new feature bits after micro code
was updated so administrators can act upon.
- optimizations of the entry ASM code which reduce code footprint and
make the code simpler and faster.
- fix the {pmd,pud}_{set,clear}_flags() implementations to work
properly on paravirt kernels by removing the address translation
operations.
- revert the harmful vmexit_fill_RSB() optimization
- use IBRS around firmware calls
- teach objtool about retpolines and add annotations for indirect
jumps and calls.
- explicitly disable jumplabel patching in __init code and handle
patching failures properly instead of silently ignoring them.
- remove indirect paravirt calls for writing the speculation control
MSR as these calls are obviously proving the same attack vector
which is tried to be mitigated.
- a few small fixes which address build issues with recent compiler
and assembler versions"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
KVM/VMX: Optimize vmx_vcpu_run() and svm_vcpu_run() by marking the RDMSR path as unlikely()
KVM/x86: Remove indirect MSR op calls from SPEC_CTRL
objtool, retpolines: Integrate objtool with retpoline support more closely
x86/entry/64: Simplify ENCODE_FRAME_POINTER
extable: Make init_kernel_text() global
jump_label: Warn on failed jump_label patching attempt
jump_label: Explicitly disable jump labels in __init code
x86/entry/64: Open-code switch_to_thread_stack()
x86/entry/64: Move ASM_CLAC to interrupt_entry()
x86/entry/64: Remove 'interrupt' macro
x86/entry/64: Move the switch_to_thread_stack() call to interrupt_entry()
x86/entry/64: Move ENTER_IRQ_STACK from interrupt macro to interrupt_entry
x86/entry/64: Move PUSH_AND_CLEAR_REGS from interrupt macro to helper function
x86/speculation: Move firmware_restrict_branch_speculation_*() from C to CPP
objtool: Add module specific retpoline rules
objtool: Add retpoline validation
objtool: Use existing global variables for options
x86/mm/sme, objtool: Annotate indirect call in sme_encrypt_execute()
x86/boot, objtool: Annotate indirect jump in secondary_startup_64()
x86/paravirt, objtool: Annotate indirect calls
...
Disable retpoline validation in objtool if your compiler sucks, and otherwise
select the validation stuff for CONFIG_RETPOLINE=y (most builds would already
have it set due to ORC).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Makefile changes:
- enable unused-variable warning that was wrongly disabled for clang
Kconfig changes:
- warn blank 'help' and fix existing instances
- fix 'choice' behavior to not write out invisible symbols
- fix misc weirdness
Coccinell changes:
- fix false positive of free after managed memory alloc detection
- improve performance of NULL dereference detection
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jy5l
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
"Makefile changes:
- enable unused-variable warning that was wrongly disabled for clang
Kconfig changes:
- warn about blank 'help' and fix existing instances
- fix 'choice' behavior to not write out invisible symbols
- fix misc weirdness
Coccinell changes:
- fix false positive of free after managed memory alloc detection
- improve performance of NULL dereference detection"
* tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits)
kconfig: remove const qualifier from sym_expand_string_value()
kconfig: add xrealloc() helper
kconfig: send error messages to stderr
kconfig: echo stdin to stdout if either is redirected
kconfig: remove check_stdin()
kconfig: remove 'config*' pattern from .gitignnore
kconfig: show '?' prompt even if no help text is available
kconfig: do not write choice values when their dependency becomes n
coccinelle: deref_null: avoid useless computation
coccinelle: devm_free: reduce false positives
kbuild: clang: disable unused variable warnings only when constant
kconfig: Warn if help text is blank
nios2: kconfig: Remove blank help text
arm: vt8500: kconfig: Remove blank help text
MIPS: kconfig: Remove blank help text
MIPS: BCM63XX: kconfig: Remove blank help text
lib/Kconfig.debug: Remove blank help text
Staging: rtl8192e: kconfig: Remove blank help text
Staging: rtl8192u: kconfig: Remove blank help text
mmc: kconfig: Remove blank help text
...
Nearly all modern compilers support a stack-protector option, and nearly
all modern distributions enable the kernel stack-protector, so enabling
this by default in kernel builds would make sense. However, Kconfig does
not have knowledge of available compiler features, so it isn't safe to
force on, as this would unconditionally break builds for the compilers or
architectures that don't have support. Instead, this introduces a new
option, CONFIG_CC_STACKPROTECTOR_AUTO, which attempts to discover the best
possible stack-protector available, and will allow builds to proceed even
if the compiler doesn't support any stack-protector.
This option is made the default so that kernels built with modern
compilers will be protected-by-default against stack buffer overflows,
avoiding things like the recent BlueBorne attack. Selection of a specific
stack-protector option remains available, including disabling it.
Additionally, tiny.config is adjusted to use CC_STACKPROTECTOR_NONE, since
that's the option with the least code size (and it used to be the default,
so we have to explicitly choose it there now).
Link: http://lkml.kernel.org/r/1510076320-69931-4-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Various portions of the kernel, especially per-architecture pieces,
need to know if the compiler is building with the stack protector.
This was done in the arch/Kconfig with 'select', but this doesn't
allow a way to do auto-detected compiler support. In preparation for
creating an on-if-available default, move the logic for the definition of
CONFIG_CC_STACKPROTECTOR into the Makefile.
Link: http://lkml.kernel.org/r/1510076320-69931-3-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order to make stack-protector failures warn instead of unconditionally
breaking the build, this moves the compiler output sanity-check earlier,
and sets a flag for later testing. Future patches can choose to warn or
fail, depending on the flag value.
Link: http://lkml.kernel.org/r/1510076320-69931-2-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With KASAN enabled the kernel has two different memset() functions, one
with KASAN checks (memset) and one without (__memset). KASAN uses some
macro tricks to use the proper version where required. For example
memset() calls in mm/slub.c are without KASAN checks, since they operate
on poisoned slab object metadata.
The issue is that clang emits memset() calls even when there is no
memset() in the source code. They get linked with improper memset()
implementation and the kernel fails to boot due to a huge amount of KASAN
reports during early boot stages.
The solution is to add -fno-builtin flag for files with KASAN_SANITIZE :=
n marker.
Link: http://lkml.kernel.org/r/8ffecfffe04088c52c42b92739c2bd8a0bcb3f5e.1516384594.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, GCC disables -Wunused-const-variable, but not
-Wunused-variable, so warns unused variables if they are
non-constant.
While, Clang does not warn unused variables at all regardless of
the const qualifier because -Wno-unused-const-variable is implied
by the stronger option -Wno-unused-variable.
Disable -Wunused-const-variable instead of -Wunused-variable so that
GCC and Clang work in the same way.
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
A pretty big batch of Kconfig updates. I have to mention the lexer
and parser of Kconfig are now built from real .l and .y sources.
So, flex and bison are the requirement for building the kernel.
Both of them (unlike gperf) have been stable for a long time. This
change has been tested several weeks in linux-next, and I did not
receive any problem report about this.
Summary:
- Add checks for mistakes, like the choice default is not in
choice, help is doubled
- Document data structure and complex code
- Fix various memory leaks
- Change Makefile to build lexer and parser instead of using
pre-generated C files
- Drop 'boolean' keyword, which is equivalent to 'bool'
- Use default 'yy' prefix and remove unneeded Make variables
- Fix gettext() check for xconfig
- Announce that oldnoconfig will be finally removed
- Make 'Selected by:' and 'Implied by' readable in help and
search result
- Hide silentoldconfig from 'make help' to stop confusing people
- Fix misc things and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rsi/
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
"A pretty big batch of Kconfig updates.
I have to mention the lexer and parser of Kconfig are now built from
real .l and .y sources. So, flex and bison are the requirement for
building the kernel. Both of them (unlike gperf) have been stable for
a long time. This change has been tested several weeks in linux-next,
and I did not receive any problem report about this.
Summary:
- add checks for mistakes, like the choice default is not in choice,
help is doubled
- document data structure and complex code
- fix various memory leaks
- change Makefile to build lexer and parser instead of using
pre-generated C files
- drop 'boolean' keyword, which is equivalent to 'bool'
- use default 'yy' prefix and remove unneeded Make variables
- fix gettext() check for xconfig
- announce that oldnoconfig will be finally removed
- make 'Selected by:' and 'Implied by' readable in help and search
result
- hide silentoldconfig from 'make help' to stop confusing people
- fix misc things and cleanups"
* tag 'kconfig-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (37 commits)
kconfig: Remove silentoldconfig from help and docs; fix kconfig/conf's help
kconfig: make "Selected by:" and "Implied by:" readable
kconfig: announce removal of oldnoconfig if used
kconfig: fix make xconfig when gettext is missing
kconfig: Clarify menu and 'if' dependency propagation
kconfig: Document 'if' flattening logic
kconfig: Clarify choice dependency propagation
kconfig: Document SYMBOL_OPTIONAL logic
kbuild: remove unnecessary LEX_PREFIX and YACC_PREFIX
kconfig: use default 'yy' prefix for lexer and parser
kconfig: make conf_unsaved a local variable of conf_read()
kconfig: make xfgets() really static
kconfig: make input_mode static
kconfig: Warn if there is more than one help text
kconfig: drop 'boolean' keyword
kconfig: use bool instead of boolean for type definition attributes, again
kconfig: Remove menu_end_entry()
kconfig: Document important expression functions
kconfig: Document automatic submenu creation code
kconfig: Fix choice symbol expression leak
...
- fix cross-compilation for architectures that setup CROSS_COMPILE
in their arch Makefile
- fix Kconfig rational operators for bool / tristate
- drop a gperf-generated file from .gitignore
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=py+X
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix cross-compilation for architectures that setup CROSS_COMPILE in
their arch Makefile
- fix Kconfig rational operators for bool / tristate
- drop a gperf-generated file from .gitignore
* tag 'kbuild-fixes-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
genksyms: drop *.hash.c from .gitignore
kconfig: fix relational operators for bool and tristate symbols
kbuild: move cc-option and cc-disable-warning after incl. arch Makefile
It appears that hardened gentoo enables "-fstack-check" by default for
gcc.
That doesn't work _at_all_ for the kernel, because the kernel stack
doesn't act like a user stack at all: it's much smaller, and it doesn't
auto-expand on use. So the extra "probe one page below the stack" code
generated by -fstack-check just breaks the kernel in horrible ways,
causing infinite double faults etc.
[ I have to say, that the particular code gcc generates looks very
stupid even for user space where it works, but that's a separate
issue. ]
Reported-and-tested-by: Alexander Tsoy <alexander@tsoy.me>
Reported-and-tested-by: Toralf Förster <toralf.foerster@gmx.de>
Cc: stable@kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow users to use their favorite lexer / parser generators.
This is useful for me to test various flex and bison versions.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Geert reported commit ae6b289a37 ("kbuild: Set KBUILD_CFLAGS before
incl. arch Makefile") broke cross-compilation using a cross-compiler
that supports less compiler options than the host compiler.
For example,
cc1: error: unrecognized command line option "-Wno-unused-but-set-variable"
This problem happens on architectures that setup CROSS_COMPILE in their
arch/*/Makefile.
Move the cc-option and cc-disable-warning back to the original position,
but keep the Clang target options untouched.
Fixes: ae6b289a37 ("kbuild: Set KBUILD_CFLAGS before incl. arch Makefile")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
The "rpm" has been kept for backward compatibility since pre-git era.
I am planning to remove it after the Linux 4.18 release. Annouce the
end of the support, prompting to use "rpm-pkg" instead.
If you use "rpm", it will work like "rpm-pkg", but warning messages
will be displayed as follows:
WARNING: "rpm" target will be removed after Linux 4.18
Please use "rpm-pkg" instead.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Set the clang KBUILD_CFLAGS up before including arch/ Makefiles,
so that ld-options (etc.) can work correctly.
This fixes errors with clang such as ld-options trying to CC
against your host architecture, but LD trying to link against
your target architecture.
Signed-off-by: Chris Fries <cfries@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
"obj-y += foo/" syntax requires Kbuild to visit the "foo" subdirectory
and link built-in.o from that directory. This means foo/Makefile is
responsible for creating built-in.o even if there is no object to
link (in this case, built-in.o is an empty archive).
We have had several fixups like commit 4b024242e8 ("kbuild: Fix
linking error built-in.o no such file or directory"), then ended up
with a complex condition as follows:
ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),)
builtin-target := $(obj)/built-in.o
endif
We still have more cases not covered by the above, so we need to add
obj- := dummy.o
in several places just for creating empty built-in.o.
A key point is, the parent Makefile knows whether built-in.o is needed
or not. If a subdirectory needs to create built-in.o, its parent can
tell the fact when descending.
If non-empty $(need-builtin) flag is passed from the parent, built-in.o
should be created. $(obj-y) should be still checked to support the
single target "%/". All of ugly tricks will go away.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Most places use pwd and rely on $PATH lookup. Moving the remaining
absolute path /bin/pwd users over for consistency.
Also, a reason for doing /bin/pwd -> pwd instead of the other way around
is because I believe build systems should make little assumptions on
host filesystem layout. Case in point, we do this kind of patching
already in NixOS.
Ref. commit 028568d84d
("kbuild: revert $(realpath ...) to $(shell cd ... && /bin/pwd)").
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
One of the most remarkable improvements in this cycle is, Kbuild is
now able to cache the result of shell commands. Some variables are
expensive to compute, for example, $(call cc-option,...) invokes the
compiler. It is not efficient to redo this computation every time,
even when we are not actually building anything. Kbuild creates a
hidden file ".cache.mk" that contains invoked shell commands and
their results. The speed-up should be noticeable.
Summary:
- Fix arch build issues (hexagon, sh)
- Clean up various Makefiles and scripts
- Fix wrong usage of {CFLAGS,LDFLAGS}_MODULE in arch Makefiles
- Cache variables that are expensive to compute
- Improve cc-ldopton and ld-option for Clang
- Optimize output directory creation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zIdO
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
"One of the most remarkable improvements in this cycle is, Kbuild is
now able to cache the result of shell commands. Some variables are
expensive to compute, for example, $(call cc-option,...) invokes the
compiler. It is not efficient to redo this computation every time,
even when we are not actually building anything. Kbuild creates a
hidden file ".cache.mk" that contains invoked shell commands and their
results. The speed-up should be noticeable.
Summary:
- Fix arch build issues (hexagon, sh)
- Clean up various Makefiles and scripts
- Fix wrong usage of {CFLAGS,LDFLAGS}_MODULE in arch Makefiles
- Cache variables that are expensive to compute
- Improve cc-ldopton and ld-option for Clang
- Optimize output directory creation"
* tag 'kbuild-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kbuild: move coccicheck help from scripts/Makefile.help to top Makefile
sh: decompressor: add shipped files to .gitignore
frv: .gitignore: ignore vmlinux.lds
selinux: remove unnecessary assignment to subdir-
kbuild: specify FORCE in Makefile.headersinst as .PHONY target
kbuild: remove redundant mkdir from ./Kbuild
kbuild: optimize object directory creation for incremental build
kbuild: create object directories simpler and faster
kbuild: filter-out PHONY targets from "targets"
kbuild: remove redundant $(wildcard ...) for cmd_files calculation
kbuild: create directory for make cache only when necessary
sh: select KBUILD_DEFCONFIG depending on ARCH
kbuild: fix linker feature test macros when cross compiling with Clang
kbuild: shrink .cache.mk when it exceeds 1000 lines
kbuild: do not call cc-option before KBUILD_CFLAGS initialization
kbuild: Cache a few more calls to the compiler
kbuild: Add a cache for generated variables
kbuild: add forward declaration of default target to Makefile.asm-generic
kbuild: remove KBUILD_SUBDIR_ASFLAGS and KBUILD_SUBDIR_CCFLAGS
hexagon/kbuild: replace CFLAGS_MODULE with KBUILD_CFLAGS_MODULE
...
The flag enables Clang instrumentation of comparison operations
(currently not supported by GCC). This instrumentation is needed by the
new KCOV device to collect comparison operands.
Link: http://lkml.kernel.org/r/20171011095459.70721-2-glider@google.com
Signed-off-by: Victor Chibotaru <tchibo@google.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: <syzkaller@googlegroups.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In my view, it is not helpful to have a separate file just for
the coccicheck help message. Merge scripts/Makefile.help into
the top-level Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
I do not see any reason why $(wildcard ...) needs to be called twice
for computing cmd_files. Remove the first one.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This tag contains the core RISC-V Linux port, which has been through
nine rounds of review on various mailing lists. The port is not
complete: there's some cleanup patches moving through the review
process, a whole bunch of drivers that need some work, and a lot of
feature additions that will be needed.
The patches contained in this tag have been through nine rounds of
review on the various mailing lists. I have some outstanding cleanup
patches, but since there's been so much review on these patches I
thought it would be best to submit them as-is and then submit explicit
cleanup patches so everyone can review them. This first patch set is
big enough that it's a bit of a pain to constantly rewrite, and it's
caused a few headaches with various contributors.
The port is definately a work in progress. While what's there builds
and boots with 4.14, it's a bit hard to actually see anything happen
because there are no device drivers yet. I maintain a staging branch
that contains all the device drivers and cleanup that actually works,
but those patches won't all be ready for a while. I'd like to get what
we currently have into your tree so everyone can start working from a
single base -- of particular importance is allowing the glibc
upstreaming process to proceed so we can sort out any possibly lingering
user-visible ABI problems we might have.
Copied below is the ChangeLog that contains the history of this patch
set:
(v9) As per suggestions on our v8 patch set, I've split the core architecture code
out from our drivers and would like to submit this patch set to be included
into linux-next, with the goal being to be merged in during the next merge
window. This patch set is based on 4.14-rc2, but if it's better to have it
based on something else then I can change it around.
This patch set contains just the core arch code for RISC-V, so while it builds
an nominally boots, you can't print or take an interrupt so it's not that
useful. If you're looking to actually boot a system it would probably be
better to use the full patch set listed below.
We've collected a handful of tags from reviewers, and the remainder of the
patch set only got minimal feedback last time. Here's what changed:
* We now use the device tree to initialize the timer driver so it's less
tighly coupled with the arch port.
* I cleaned up the defconfigs -- there's actually now just one, and it's
empty. For now I think we're OK with what the kernel sets as defaults, but
I anticipate we'll begin to expand this as people start to use the port
more.
* The VDSO symbols version is sane.
* We WFI while spinning in the boot loop.
* A handful of comments have been added.
While there are still a handful of FIXMEs in this patch set, we've started to
get enough interest from various users and contributors that maintaining an out
of tree patch set is starting to become a big burden. Hopefully the patches
are good enough to merge now, which will at least get everyone working in a
more reasonable manner as we clean up the remaining issues.
This patch set is also availiable on github
https://github.com/riscv/riscv-linux/tree/riscv-for-submission-v9-arch
as is the entire patch set necessary to get a more functional RISC-V system up
and running, including a handful of patches that aren't ready for upstream yet.
https://github.com/riscv/riscv-linux/tree/riscv-for-submission-v9
Hopefully I've managed to get everyone's feedback
Here's the change highlights from the whole patch set:
(v8) I know it may not be the ideal time to submit a patch set right now, as
it's the middle of the merge window, but things have calmed down quite a bit in
the last month so I thought it would be good to get everyone on the same page.
There's been a handful of changes since the last patch set, but most of them
are fairly minor:
* We changed PAGE_OFFSET to allowing mapping more physical memory on 64-bit
systems. This is user configurable, as it triggers a different code model
that generates slightly less efficient code.
* The device tree binding documentation is back, I'd managed to lose it at some
point.
* We now pass the atomic64 test suite. The SBI timer driver has been
* refactored.
(v7) It's been a while since my last patch set, but the changes han been fairly
minimal:
* The PCI cleanup patches have been dropped, we'll do them as a separate patch
set later.
* We've the Kconfig entries from CONFIG_ISA_* to CONFIG_RISCV_ISA_*, to make
grep easier.
* There have been a handful of memory model related tweaks in I/O land,
particularly relating the PCI and the upcoming platform specification.
There are significant comments in the relevant files. This is still a WIP,
but I think we're close to getting as good as we're going to get until we
end up with some more specifications.
(v6) As it's been only a day since the v5 patch set, the changes are pretty
minimal:
* The patch set is now based on linux-next/master, which I believe is a better
base now that we're getting closer to upstream.
* EARLY_PRINTK is no longer an option. Since the SBI console is reasonable,
there's no penalty to enabling it (and thus no benefit to disabling it).
* The mmap syscalls were refactored a bit.
(v5) Things have really started to calm down, so this is fairly similar to the
v4 patch set. The most interesting changes include:
* We've moved back to a single patch set.
* SMP support has been fixed, I was accidentally running on a non-SMP
configuration. There were various mistakes all over the tree as a result of
this.
* The cmpxchg syscalls have been removed, as they were deemed a bad idea. As
a result, RISC-V Linux systems mandate the A extension. The corresponding
Kconfig entry to enable builds on non-A systems has been removed.
* A few more atomic fixes: mostly fence changes, but those resulted in a
handful of additional macros that were no longer necessary.
* riscv_early_sie has been removed.
(v4) There have only been a few changes since the v3 patch set:
* The cmpxchg64 syscall is no longer enabled on 32-bit systems. It's not
possible to provide this on SMP systems, and it's not necessary as glibc
knows not to call it.
* We provide a ELF_HWCAP so users can determine the ISA of the machine the
kernel is running on.
* The multi-line comments are in a better form.
* There were a handful of headers that could be replaced with the asm-generic
versions, and a few unnecessary definitions.
* We no longer use printk, but instead use pr_*.
* A few Kconfig and defconfig entries have been cleaned up.
(v3) A highlight of the changes since the v2 patch set includes:
* We've split out all our drivers into separate patch sets, which I've already
sent out to the relevant maintainers. I haven't included those patches in
this patch set, but some of them are necessary to build our port. A git
tree that contains all our patch sets merged together lives at
<https://github.com/riscv/riscv-linux/tree/riscv-for-submission-v3>.
* The patch set is now split up differently: rather than being split per
directory it is split per topic. Hopefully this will make it easier to
review the port on the mailing list. The split is a bit rough, so you
probably still want to look at the patch set as a whole.
* atomic.h has been completely rewritten and is hopefully now correct. I've
attempted to sanitize the various other memory model related code as well,
and I think it should all be sane now aside from a handful of FIXMEs
commented in the code.
* We've changed the cmpexchg syscall to always exist and to not be
multiplexed. There is also a VDSO entry for compare and exchange, which
allows kernels with the A extension to execute user code without the A
extension reasonably fast.
* Our user-visible register state now contains enough space for the Q
extension for 128-bit floating point, as well as a few words to allow
extensibility to future ISA extensions like the eventual V extension for
vectors.
* A handful of driver cleanups, but these have been split into separate patch
sets now so I won't duplicate them here.
(v2) A highlight of the changes since the v1 patch set includes:
* We've split out our drivers into the right places, which means now there's
a lot more patches. I'll be submitting these patches to various subsystem
maintainers and including them in any future RISC-V patch sets until
they've been merged.
* The SBI console driver has been completely rewritten to use the HVC helpers
and is now significantly smaller.
* We've begun to use weaker barriers as opposed to just the big "fence".
There's still some work to do here, specifically:
- We need fences in the relaxed MMIO functions.
- The non-relaxed MMIO functions are missing R/W bits on their fences.
- Many AMOs need the aq and rl bits set.
* We now have thread_info in task_struct. As a result, sscratch now contains
TP instead of SP. This was necessary because thread_info is no longer on
the stack.
* A few shared routines have been added that we use instead of creating
another arch copy.
-----BEGIN PGP SIGNATURE-----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=xDIk
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux
Pull RISC-V architecture support from Palmer Dabbelt:
"This contains the core RISC-V Linux port, which has been through nine
rounds of review on various mailing lists. The port is not complete:
there's some cleanup patches moving through the review process, a
whole bunch of drivers that need some work, and a lot of feature
additions that will be needed.
The patches contained in this tag have been through nine rounds of
review on the various mailing lists. I have some outstanding cleanup
patches, but since there's been so much review on these patches I
thought it would be best to submit them as-is and then submit explicit
cleanup patches so everyone can review them. This first patch set is
big enough that it's a bit of a pain to constantly rewrite, and it's
caused a few headaches with various contributors.
The port is definately a work in progress. While what's there builds
and boots with 4.14, it's a bit hard to actually see anything happen
because there are no device drivers yet. I maintain a staging branch
that contains all the device drivers and cleanup that actually works,
but those patches won't all be ready for a while. I'd like to get what
we currently have into your tree so everyone can start working from a
single base -- of particular importance is allowing the glibc
upstreaming process to proceed so we can sort out any possibly
lingering user-visible ABI problems we might have.
Copied below is the ChangeLog that contains the history of this patch
set:
(v9) As per suggestions on our v8 patch set, I've split the core
architecture code out from our drivers and would like to submit
this patch set to be included into linux-next, with the goal
being to be merged in during the next merge window. This patch
set is based on 4.14-rc2, but if it's better to have it based on
something else then I can change it around.
This patch set contains just the core arch code for RISC-V, so
while it builds an nominally boots, you can't print or take an
interrupt so it's not that useful. If you're looking to actually
boot a system it would probably be better to use the full patch
set listed below.
We've collected a handful of tags from reviewers, and the
remainder of the patch set only got minimal feedback last time.
Here's what changed:
- We now use the device tree to initialize the timer driver so
it's less tighly coupled with the arch port.
- I cleaned up the defconfigs -- there's actually now just one,
and it's empty. For now I think we're OK with what the kernel
sets as defaults, but I anticipate we'll begin to expand this
as people start to use the port more.
- The VDSO symbols version is sane.
- We WFI while spinning in the boot loop.
- A handful of comments have been added.
While there are still a handful of FIXMEs in this patch set,
we've started to get enough interest from various users and
contributors that maintaining an out of tree patch set is
starting to become a big burden. Hopefully the patches are good
enough to merge now, which will at least get everyone working in
a more reasonable manner as we clean up the remaining issues.
(v8) I know it may not be the ideal time to submit a patch set right
now, as it's the middle of the merge window, but things have
calmed down quite a bit in the last month so I thought it would
be good to get everyone on the same page. There's been a handful
of changes since the last patch set, but most of them are fairly
minor:
- We changed PAGE_OFFSET to allowing mapping more physical
memory on 64-bit systems. This is user configurable, as it
triggers a different code model that generates slightly less
efficient code.
- The device tree binding documentation is back, I'd managed to
lose it at some point.
- We now pass the atomic64 test suite
- The SBI timer driver has been refactored.
(v7) It's been a while since my last patch set, but the changes han
been fairly minimal:
- The PCI cleanup patches have been dropped, we'll do them as a
separate patch set later.
- We've the Kconfig entries from CONFIG_ISA_* to
CONFIG_RISCV_ISA_*, to make grep easier.
- There have been a handful of memory model related tweaks in
I/O land, particularly relating the PCI and the upcoming
platform specification. There are significant comments in the
relevant files. This is still a WIP, but I think we're close
to getting as good as we're going to get until we end up with
some more specifications.
(v6) As it's been only a day since the v5 patch set, the changes are
pretty minimal:
- The patch set is now based on linux-next/master, which I
believe is a better base now that we're getting closer to
upstream.
- EARLY_PRINTK is no longer an option. Since the SBI console is
reasonable, there's no penalty to enabling it (and thus no
benefit to disabling it).
- The mmap syscalls were refactored a bit.
(v5) Things have really started to calm down, so this is fairly
similar to the v4 patch set. The most interesting changes
include:
- We've moved back to a single patch set.
- SMP support has been fixed, I was accidentally running on a
non-SMP configuration. There were various mistakes all over
the tree as a result of this.
- The cmpxchg syscalls have been removed, as they were deemed a
bad idea. As a result, RISC-V Linux systems mandate the A
extension. The corresponding Kconfig entry to enable builds
on non-A systems has been removed.
- A few more atomic fixes: mostly fence changes, but those
resulted in a handful of additional macros that were no
longer necessary.
- riscv_early_sie has been removed.
(v4) There have only been a few changes since the v3 patch set:
- The cmpxchg64 syscall is no longer enabled on 32-bit systems.
It's not possible to provide this on SMP systems, and it's
not necessary as glibc knows not to call it.
- We provide a ELF_HWCAP so users can determine the ISA of the
machine the kernel is running on.
- The multi-line comments are in a better form.
- There were a handful of headers that could be replaced with
the asm-generic versions, and a few unnecessary definitions.
- We no longer use printk, but instead use pr_*.
- A few Kconfig and defconfig entries have been cleaned up.
(v3) A highlight of the changes since the v2 patch set includes:
- We've split out all our drivers into separate patch sets,
which I've already sent out to the relevant maintainers. I
haven't included those patches in this patch set, but some of
them are necessary to build our port.
- The patch set is now split up differently: rather than being
split per directory it is split per topic. Hopefully this
will make it easier to review the port on the mailing list.
The split is a bit rough, so you probably still want to look
at the patch set as a whole.
- atomic.h has been completely rewritten and is hopefully now
correct. I've attempted to sanitize the various other memory
model related code as well, and I think it should all be sane
now aside from a handful of FIXMEs commented in the code.
- We've changed the cmpexchg syscall to always exist and to not
be multiplexed. There is also a VDSO entry for compare and
exchange, which allows kernels with the A extension to
execute user code without the A extension reasonably fast.
- Our user-visible register state now contains enough space for
the Q extension for 128-bit floating point, as well as a few
words to allow extensibility to future ISA extensions like
the eventual V extension for vectors.
- A handful of driver cleanups, but these have been split into
separate patch sets now so I won't duplicate them here.
(v2) A highlight of the changes since the v1 patch set includes:
- We've split out our drivers into the right places, which
means now there's a lot more patches. I'll be submitting
these patches to various subsystem maintainers and including
them in any future RISC-V patch sets until they've been
merged.
- The SBI console driver has been completely rewritten to use
the HVC helpers and is now significantly smaller.
- We've begun to use weaker barriers as opposed to just the big
"fence". There's still some work to do here, specifically:
- We need fences in the relaxed MMIO functions.
- The non-relaxed MMIO functions are missing R/W bits on their fences.
- Many AMOs need the aq and rl bits set.
- We now have thread_info in task_struct. As a result, sscratch
now contains TP instead of SP. This was necessary because
thread_info is no longer on the stack.
- A few shared routines have been added that we use instead of
creating another arch copy"
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
* tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
RISC-V: Build Infrastructure
RISC-V: User-facing API
RISC-V: Paging and MMU
RISC-V: Device, timer, IRQs, and the SBI
RISC-V: Task implementation
RISC-V: ELF and module implementation
RISC-V: Generic library routines and assembly
RISC-V: Atomic and Locking Code
RISC-V: Init and Halt Code
dt-bindings: RISC-V CPU Bindings
lib: Add shared copies of some GCC library routines
MAINTAINERS: Add RISC-V
- kbuild cleanups and improvements for dtbs
- Code clean-up of overlay code and fixing for some long standing memory
leak and race condition in applying overlays
- Improvements to DT memory usage making sysfs/kobjects optional and
skipping unflattening of disabled nodes. This is part of kernel
tinification efforts.
- Final piece of removing storing the full path for every DT node. The
prerequisite conversion of printk's to use device_node format
specifier happened in 4.14.
- Sync with current upstream dtc. This brings additional checks to dtb
compiling.
- Binding doc tree wide removal of leading 0s from examples
- RTC binding documentation adding missing devices and some
consolidation of duplicated bindings
- Vendor prefix documentation for nutsboard, Silicon Storage Technology,
shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH,
Opal Kelly, and Next Thing
-----BEGIN PGP SIGNATURE-----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=jgpN
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
"A bigger diffstat than usual with the kbuild changes and a tree wide
fix in the binding documentation.
Summary:
- kbuild cleanups and improvements for dtbs
- Code clean-up of overlay code and fixing for some long standing
memory leak and race condition in applying overlays
- Improvements to DT memory usage making sysfs/kobjects optional and
skipping unflattening of disabled nodes. This is part of kernel
tinification efforts.
- Final piece of removing storing the full path for every DT node.
The prerequisite conversion of printk's to use device_node format
specifier happened in 4.14.
- Sync with current upstream dtc. This brings additional checks to
dtb compiling.
- Binding doc tree wide removal of leading 0s from examples
- RTC binding documentation adding missing devices and some
consolidation of duplicated bindings
- Vendor prefix documentation for nutsboard, Silicon Storage
Technology, shimafuji, Tecon Microprocessor Technologies, DH
electronics GmbH, Opal Kelly, and Next Thing"
* tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: usb: add #phy-cells to usb-nop-xceiv
dt-bindings: Remove leading zeros from bindings notation
kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib
MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry
kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile
.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore
.gitignore: sort normal pattern rules alphabetically
dt-bindings: add vendor prefix for Next Thing Co.
scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9
of: dynamic: fix memory leak related to properties of __of_node_dup
of: overlay: make pr_err() string unique
of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove
of: overlay: remove unneeded check for NULL kbasename()
of: overlay: remove a dependency on device node full_name
of: overlay: simplify applying symbols from an overlay
of: overlay: avoid race condition between applying multiple overlays
of: overlay: loosen overly strict phandle clash check
of: overlay: expand check of whether overlay changeset can be removed
of: overlay: detect cases where device tree may become corrupt
of: overlay: minor restructuring
...
Pull x86 core updates from Ingo Molnar:
"Note that in this cycle most of the x86 topics interacted at a level
that caused them to be merged into tip:x86/asm - but this should be a
temporary phenomenon, hopefully we'll back to the usual patterns in
the next merge window.
The main changes in this cycle were:
Hardware enablement:
- Add support for the Intel UMIP (User Mode Instruction Prevention)
CPU feature. This is a security feature that disables certain
instructions such as SGDT, SLDT, SIDT, SMSW and STR. (Ricardo Neri)
[ Note that this is disabled by default for now, there are some
smaller enhancements in the pipeline that I'll follow up with in
the next 1-2 days, which allows this to be enabled by default.]
- Add support for the AMD SEV (Secure Encrypted Virtualization) CPU
feature, on top of SME (Secure Memory Encryption) support that was
added in v4.14. (Tom Lendacky, Brijesh Singh)
- Enable new SSE/AVX/AVX512 CPU features: AVX512_VBMI2, GFNI, VAES,
VPCLMULQDQ, AVX512_VNNI, AVX512_BITALG. (Gayatri Kammela)
Other changes:
- A big series of entry code simplifications and enhancements (Andy
Lutomirski)
- Make the ORC unwinder default on x86 and various objtool
enhancements. (Josh Poimboeuf)
- 5-level paging enhancements (Kirill A. Shutemov)
- Micro-optimize the entry code a bit (Borislav Petkov)
- Improve the handling of interdependent CPU features in the early
FPU init code (Andi Kleen)
- Build system enhancements (Changbin Du, Masahiro Yamada)
- ... plus misc enhancements, fixes and cleanups"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (118 commits)
x86/build: Make the boot image generation less verbose
selftests/x86: Add tests for the STR and SLDT instructions
selftests/x86: Add tests for User-Mode Instruction Prevention
x86/traps: Fix up general protection faults caused by UMIP
x86/umip: Enable User-Mode Instruction Prevention at runtime
x86/umip: Force a page fault when unable to copy emulated result to user
x86/umip: Add emulation code for UMIP instructions
x86/cpufeature: Add User-Mode Instruction Prevention definitions
x86/insn-eval: Add support to resolve 16-bit address encodings
x86/insn-eval: Handle 32-bit address encodings in virtual-8086 mode
x86/insn-eval: Add wrapper function for 32 and 64-bit addresses
x86/insn-eval: Add support to resolve 32-bit address encodings
x86/insn-eval: Compute linear address in several utility functions
resource: Fix resource_size.cocci warnings
X86/KVM: Clear encryption attribute when SEV is active
X86/KVM: Decrypt shared per-cpu variables when SEV is active
percpu: Introduce DEFINE_PER_CPU_DECRYPTED
x86: Add support for changing memory encryption attribute in early boot
x86/io: Unroll string I/O when SEV is active
x86/boot: Add early boot support when running with SEV active
...
- The old driver statement has been added to the kernel docs.
- We have a couple of new helper scripts. find-unused-docs.sh from Sayli
Karnic will point out kerneldoc comments that are not actually used in
the documentation. Jani Nikula's documentation-file-ref-check finds
references to non-existing files.
- A new ftrace document from Steve Rostedt.
- Vinod Koul converted the dmaengine docs to RST
Beyond that, it's mostly simple fixes.
-----BEGIN PGP SIGNATURE-----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=H6ud
-----END PGP SIGNATURE-----
Merge tag 'docs-4.15' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A relatively calm cycle for the docs tree again.
- The old driver statement has been added to the kernel docs.
- We have a couple of new helper scripts. find-unused-docs.sh from
Sayli Karnic will point out kerneldoc comments that are not actually
used in the documentation. Jani Nikula's
documentation-file-ref-check finds references to non-existing files.
- A new ftrace document from Steve Rostedt.
- Vinod Koul converted the dmaengine docs to RST
Beyond that, it's mostly simple fixes.
This set reaches outside of Documentation/ a bit more than most. In
all cases, the changes are to comment docs, mostly from Randy, in
places where there didn't seem to be anybody better to take them"
* tag 'docs-4.15' of git://git.lwn.net/linux: (52 commits)
documentation: fb: update list of available compiled-in fonts
MAINTAINERS: update DMAengine documentation location
dmaengine: doc: ReSTize pxa_dma doc
dmaengine: doc: ReSTize dmatest doc
dmaengine: doc: ReSTize client API doc
dmaengine: doc: ReSTize provider doc
dmaengine: doc: Add ReST style dmaengine document
ftrace/docs: Add documentation on how to use ftrace from within the kernel
bug-hunting.rst: Fix an example and a typo in a Sphinx tag
scripts: Add a script to find unused documentation
samples: Convert timers to use timer_setup()
documentation: kernel-api: add more info on bitmap functions
Documentation: fix selftests related file refs
Documentation: fix ref to power basic-pm-debugging
Documentation: fix ref to trace stm content
Documentation: fix ref to coccinelle content
Documentation: fix ref to workqueue content
Documentation: fix ref to sphinx/kerneldoc.py
Documentation: fix locking rt-mutex doc refs
docs: dev-tools: correct Coccinelle version number
...
Some $(call cc-option,...) are invoked very early, even before
KBUILD_CFLAGS, etc. are initialized.
The returned string from $(call cc-option,...) depends on
KBUILD_CPPFLAGS, KBUILD_CFLAGS, and GCC_PLUGINS_CFLAGS.
Since they are exported, they are not empty when the top Makefile
is recursively invoked.
The recursion occurs in several places. For example, the top
Makefile invokes itself for silentoldconfig. "make tinyconfig",
"make rpm-pkg" are the cases, too.
In those cases, the second call of cc-option from the same line
runs a different shell command due to non-pristine KBUILD_CFLAGS.
To get the same result all the time, KBUILD_* and GCC_PLUGINS_CFLAGS
must be initialized before any call of cc-option. This avoids
garbage data in the .cache.mk file.
Move all calls of cc-option below the config targets because target
compiler flags are unnecessary for Kconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
These are a few stragglers that I left out of the original patch to
cache calls to the C compiler ("kbuild: Add a cache for generated
variables") because they bleed out into the main Makefile and thus
uglify things a little bit. The idea is the same here, though.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
While timing a "no-op" build of the kernel (incrementally building the
kernel even though nothing changed) in the Chrome OS build system I
found that it was much slower than I expected.
Digging into things a bit, I found that quite a bit of the time was
spent invoking the C compiler even though we weren't actually building
anything. Currently in the Chrome OS build system the C compiler is
called through a number of wrappers (one of which is written in
python!) and can take upwards of 100 ms to invoke even if we're not
doing anything difficult, so these invocations of the compiler were
taking a lot of time. Worse the invocations couldn't seem to take
advantage of the multiple cores on my system.
Certainly it seems like we could make the compiler invocations in the
Chrome OS build system faster, but only to a point. Inherently
invoking a program as big as a C compiler is a fairly heavy
operation. Thus even if we can speed the compiler calls it made sense
to track down what was happening.
It turned out that all the compiler invocations were coming from
usages like this in the kernel's Makefile:
KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,)
Due to the way cc-option and similar statements work the above
contains an implicit call to the C compiler. ...and due to the fact
that we're storing the result in KBUILD_CFLAGS, a simply expanded
variable, the call will happen every time the Makefile is parsed, even
if there are no users of KBUILD_CFLAGS.
Rather than redoing this computation every time, it makes a lot of
sense to cache the result of all of the Makefile's compiler calls just
like we do when we compile a ".c" file to a ".o" file. Conceptually
this is quite a simple idea. ...and since the calls to invoke the
compiler and similar tools are centrally located in the Kbuild.include
file this doesn't even need to be super invasive.
Implementing the cache in a simple-to-use and efficient way is not
quite as simple as it first sounds, though. To get maximum speed we
really want the cache in a format that make can natively understand
and make doesn't really have an ability to load/parse files. ...but
make _can_ import other Makefiles, so the solution is to store the
cache in Makefile format. This requires coming up with a valid/unique
Makefile variable name for each value to be cached, but that's
solvable with some cleverness.
After this change, we'll automatically create a ".cache.mk" file that
will contain our cached variables. We'll load this on each invocation
of make and will avoid recomputing anything that's already in our
cache. The cache is stored in a format that it shouldn't need any
invalidation since anything that might change should affect the "key"
and any old cached value won't be used.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
We need to add "clean-files" in Makfiles to clean up DT blobs, but we
often miss to do so.
Since there are no source files that end with .dtb or .dtb.S, so we
can clean-up those files from the top-level Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
6dVh26uchcEQLN/XqUDt
=x306
-----END PGP SIGNATURE-----
Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pick up some of the MPX commits that modify the syscall entry code,
to have a common base and to reduce conflicts.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When compiling with `make CC=clang HOSTCC=clang`, I was seeing warnings
that clang did not recognize -fno-delete-null-pointer-checks for HOSTCC
targets. These were added in commit 61163efae0 ("kbuild: LLVMLinux:
Add Kbuild support for building kernel with Clang").
Clang does not support -fno-delete-null-pointer-checks, so adding it to
HOSTCFLAGS if HOSTCC is clang does not make sense.
It's not clear why the other warnings were disabled, and just for
HOSTCFLAGS, but I can remove them, add -Werror to HOSTCFLAGS and compile
with clang just fine.
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
We should avoid using the space character when passing arguments to
clang, because static code analysis check tool such as sparse may
misinterpret the arguments followed by spaces as build targets hence
cause the build to fail.
Signed-off-by: David Lin <dtwlin@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Pull objtool fix from Ingo Molnar:
"A single objtool fix: avoid silently broken ORC debuginfo builds and
error out instead"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Upgrade libelf-devel warning to error for CONFIG_ORC_UNWINDER
Rename the unwinder config options from:
CONFIG_ORC_UNWINDER
CONFIG_FRAME_POINTER_UNWINDER
CONFIG_GUESS_UNWINDER
to:
CONFIG_UNWINDER_ORC
CONFIG_UNWINDER_FRAME_POINTER
CONFIG_UNWINDER_GUESS
... in order to give them a more logical config namespace.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/73972fc7e2762e91912c6b9584582703d6f1b8cc.1507924831.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a simple script and build target to do a treewide grep for
references to files under Documentation, and report the non-existing
file in stderr. It tries to take into account punctuation not part of
the filename, and wildcards, but there are bound to be false positives
too. Mostly seems accurate though.
We've moved files around enough to make having this worthwhile.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Change to enable dochelp run from main make level to make it easier to
use it.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The top Makefile is divided into some sections such as mixed targets,
config targets, build targets, etc.
When we build mixed targets, Kbuild just invokes submake to process
them one by one. In this case, compiler-related variables like CC,
KBUILD_CFLAGS, etc. are unneeded.
Check what kind of targets we are building first, and parse variables
for building only when necessary.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The first "_all" occurrence around line 120 is only visible when
KBUILD_SRC is unset.
If O=... is specified, the working directory is relocated, then the
only second occurrence around line 193 is visible, that is not set
to PHONY.
Move the first one to an always visible place. This clarifies "_all"
is our default target and it is always set to PHONY.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Since commit 5e53879008 ("sparc,sparc64: unify Makefile"), hdr-arch
and SRCARCH always match.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Since commit 1f2bfbd00e ("kbuild: link of vmlinux moved to a
script"), it is easy to increment .version without using a temporary
file .old_version.
I do not see anybody who creates the .tmp_version. Probably it is a
left-over of commit 4e25d8bb95 ("[PATCH] kbuild: adjust .version
updating"). Just remove it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Correct typo in kselftest help text.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
I thought commit 8e9b466799 ("kbuild: use $(abspath ...) instead of
$(shell cd ... && /bin/pwd)") was a safe conversion, but it changed
the behavior.
$(abspath ...) / $(realpath ...) does not expand shell special
characters, such as '~'.
Here is a simple Makefile example:
---------------->8----------------
$(info /bin/pwd: $(shell cd ~/; /bin/pwd))
$(info abspath: $(abspath ~/))
$(info realpath: $(realpath ~/))
all:
@:
---------------->8----------------
$ make
/bin/pwd: /home/masahiro
abspath: /home/masahiro/workspace/~
realpath:
This can be a real problem if 'make O=~/foo' is invoked from another
Makefile or primitive shell like dash.
This commit partially reverts 8e9b466799.
Fixes: 8e9b466799 ("kbuild: use $(abspath ...) instead of $(shell cd ... && /bin/pwd)")
Reported-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Julien Grall <julien.grall@arm.com>
With CONFIG_ORC_UNWINDER, if the user doesn't have libelf-devel
installed, and they don't see the make warning, their ORC unwinder will
be silently broken. Upgrade the warning to an error.
Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/d9dfc39fb8240998820f9efb233d283a1ee96084.1507079417.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This update consists of:
- fixes to several existing tests
- a test for regression introduced by
b9470c2760 ("inet: kill smallest_size and smallest_port")
- seccomp support for glibc 2.26 siginfo_t.h
- fixes to kselftest framework and tests to run make O=dir use-case
- fixes to silence unnecessary test output to de-clutter test results
-----BEGIN PGP SIGNATURE-----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=FUuY
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"This update consists of:
- fixes to several existing tests
- a test for regression introduced by b9470c2760 ("inet: kill
smallest_size and smallest_port")
- seccomp support for glibc 2.26 siginfo_t.h
- fixes to kselftest framework and tests to run make O=dir use-case
- fixes to silence unnecessary test output to de-clutter test results"
* tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (28 commits)
selftests: timers: set-timer-lat: Fix hang when testing unsupported alarms
selftests: timers: set-timer-lat: fix hang when std out/err are redirected
selftests/memfd: correct run_tests.sh permission
selftests/seccomp: Support glibc 2.26 siginfo_t.h
selftests: futex: Makefile: fix for loops in targets to run silently
selftests: Makefile: fix for loops in targets to run silently
selftests: mqueue: Use full path to run tests from Makefile
selftests: futex: copy sub-dir test scripts for make O=dir run
selftests: lib.mk: copy test scripts and test files for make O=dir run
selftests: sync: kselftest and kselftest-clean fail for make O=dir case
selftests: sync: use TEST_CUSTOM_PROGS instead of TEST_PROGS
selftests: lib.mk: add TEST_CUSTOM_PROGS to allow custom test run/install
selftests: watchdog: fix to use TEST_GEN_PROGS and remove clean
selftests: lib.mk: fix test executable status check to use full path
selftests: Makefile: clear LDFLAGS for make O=dir use-case
selftests: lib.mk: kselftest and kselftest-clean fail for make O=dir case
Makefile: kselftest and kselftest-clean fail for make O=dir case
selftests/net: msg_zerocopy enable build with older kernel headers
selftests: actually run the various net selftests
selftest: add a reuseaddr test
...
This patch contains all the build infrastructure that actually enables
the RISC-V port. This includes Makefiles, linker scripts, and Kconfig
files. It also contains the only top-level change, which adds RISC-V to
the list of architectures that need a sed run to produce the ARCH
variable when building locally.
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
kselftest and kselftest-clean targets fail when object directory is
specified to relocate objects. Fix it so it can find the source tree
to build from.
make O=/tmp/kselftest_top kselftest
make[1]: Entering directory '/tmp/kselftest_top'
make[2]: Entering directory '/tmp/kselftest_top'
make[2]: *** tools/testing/selftests: No such file or directory. Stop.
make[2]: Leaving directory '/tmp/kselftest_top'
./linux-kselftest/Makefile:1185: recipe for target
'kselftest' failed
make[1]: *** [kselftest] Error 2
make[1]: Leaving directory '/tmp/kselftest_top'
Makefile:145: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 5620a0d1aa ("firmware: delete in-kernel firmware") removed the
entire firmware directory. Unfortunately it thereby also removed the
support for built-in firmware.
This restores the ability to build firmware directly into the kernel by
pruning the original Makefile to the necessary minimum. The default for
EXTRA_FIRMWARE_DIR is now the standard directory /lib/firmware/.
Fixes: 5620a0d1aa ("firmware: delete in-kernel firmware")
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Greg K-H <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many many years ago (at the kernel summit in Boston), we all came to the
agreement that the firmware/ tree should be dropped from the kernel, and
everyone use the linux-firmware package instead. For some minor reason,
David Woodhouse didn't send the pull request at that point in time, and
everyone forgot about this.
The topic came up in the hallway track at the Plumbers conference this
week, so here's a single patch that drops the whole firmware tree. The
last firmware update was back in 2013, and all distros have been using
linux-firmware instead since at least that year, if not before. The
only commits to that directory since 2013 was some kbuild fixups for
various build tool issues.
So lets finally drop this, we don't need to lug them around in the
kernel source tree anymore, especially as no one wants or uses them.
This has passed build testing with 0-day, I don't think it made it into
linux-next this week, but I figured it was good to get in before
4.14-rc1 was out.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWbwh7Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylo2ACgoVQKQzUZ+xUPR2ushiqRzumHxF8AoNauS1r+
w8HQCNYUV75voi5RmnjY
=pSt4
-----END PGP SIGNATURE-----
Merge tag 'firmware_removal-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull firmware removal from Greg KH:
"Many many years ago (at the kernel summit in Boston), we all came to
the agreement that the firmware/ tree should be dropped from the
kernel, and everyone use the linux-firmware package instead. For some
minor reason, David Woodhouse didn't send the pull request at that
point in time, and everyone forgot about this.
The topic came up in the hallway track at the Plumbers conference this
week, so here's a single patch that drops the whole firmware tree. The
last firmware update was back in 2013, and all distros have been using
linux-firmware instead since at least that year, if not before. The
only commits to that directory since 2013 was some kbuild fixups for
various build tool issues.
So lets finally drop this, we don't need to lug them around in the
kernel source tree anymore, especially as no one wants or uses them.
This has passed build testing with 0-day, I don't think it made it
into linux-next this week, but I figured it was good to get in before
4.14-rc1 was out"
* tag 'firmware_removal-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware: delete in-kernel firmware
The last firmware change for the in-kernel firmware source code was back
in 2013. Everyone has been relying on the out-of-tree linux-firmware
package for a long long time.
So let's drop it, it's baggage we don't need to keep dragging around
(and having to fix random kbuild issues over time...)
Cc: Kyle McMartin <kyle@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Use Make-builtin $(abspath ...) helper to get absolute path
- Add W=2 extra warning option to detect unused macros
- Use more KCONFIG_CONFIG instead hard-coded .config
- Fix bugs of tar*-pkg targets
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJZupWLAAoJED2LAQed4NsGVEEQAItJ0y1uxDr0cjJNE46N6p6+
EMCWKWC2H0XR9oFRY1y5utYWIwRauIaESgGg1qMU6Lbg5qZamggpNrYVH207tCz1
gNkU8wwc2SXpxJy2eG2asxY9L2mL0a5fFFOgxIxoz+hCTgr4Yk1IGnTH9+GPQKtW
thduXxTvcB4/oNTOgUHNj/7j9ydn7ETTOjsCoaEwBZqtBaaEBj20h6EOhgX+ouMd
5P9YoCbfk28KHKlnMd8sNHV5SLKb94wCwoM/QIOLl42rwIAc81dUgOmaMGeflXF9
zBH1exi4ID9SyQyuMZemJNe0bD6YR2qG0Sf1t2eDnhxmcav7Vwk+WV7Pdpr8UWw8
Lot9yPJQA43kfYj6pfCJFXzWEduNT48zGGBJb30WyGkBkidNNGkujdSeI36swEQD
fPV9tHPk48OSNPqJWZXehezBqN9U5Sa1M9dk5TNA69mzdZgNp052flxywBQ/SGTO
+h17SREP9Mm6CQ9ApfHaOlMr40/mpCCDq+p8pfem5ZtnBby9k4uNp2P9hAMTJdw8
5AOdwB0MdzvMQgF5UO0kklk6HGUZTAGHi91k5k3e+DPydt9+2ntZFZoVwVYaD756
E55KKrQZqSO758gnN9Wbr8ihgOhNI3ZA320nCjfwQdnUqQ496KAkLpgVALF8pEVi
/xIBawfQNj9BlDc3Y3jo
=Tam1
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Use Make-builtin $(abspath ...) helper to get absolute path
- Add W=2 extra warning option to detect unused macros
- Use more KCONFIG_CONFIG instead hard-coded .config
- Fix bugs of tar*-pkg targets
* tag 'kbuild-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: buildtar: do not print successful message if tar returns error
kbuild: buildtar: fix tar error when CONFIG_MODULES is disabled
kbuild: Use KCONFIG_CONFIG in buildtar
Kbuild: enable -Wunused-macros warning for "make W=2"
kbuild: use $(abspath ...) instead of $(shell cd ... && /bin/pwd)
Pull documentation updates from Jonathan Corbet:
"After a fair amount of churn in the last couple of cycles, docs are
taking it easier this time around. Lots of fixes and some new
documentation, but nothing all that radical. Perhaps the most
interesting change for many is the scripts/sphinx-pre-install tool
from Mauro; it will tell you exactly which packages you need to
install to get a working docs toolchain on your system.
There are two little patches reaching outside of Documentation/; both
just tweak kerneldoc comments to eliminate warnings and fix some
dangling doc pointers"
* 'docs-next' of git://git.lwn.net/linux: (52 commits)
Documentation/sphinx: fix kernel-doc decode for non-utf-8 locale
genalloc: Fix an incorrect kerneldoc comment
doc: Add documentation for the genalloc subsystem
assoc_array: fix path to assoc_array documentation
kernel-doc parser mishandles declarations split into lines
docs: ReSTify table of contents in core.rst
docs: process: drop git snapshots from applying-patches.rst
Documentation:input: fix typo
swap: Remove obsolete sentence
sphinx.rst: Allow Sphinx version 1.6 at the docs
docs-rst: fix verbatim font size on tables
Documentation: stable-kernel-rules: fix broken git urls
rtmutex: update rt-mutex
rtmutex: update rt-mutex-design
docs: fix minimal sphinx version in conf.py
docs: fix nested numbering in the TOC
NVMEM documentation fix: A minor typo
docs-rst: pdf: use same vertical margin on all Sphinx versions
doc: Makefile: if sphinx is not found, run a check script
docs: Fix paths in security/keys
...
Kbuild conventionally uses $(shell cd ... && /bin/pwd) idiom to get
the absolute path of the directory because GNU Make 3.80, the minimal
supported version at that time, did not support $(abspath ...) or
$(realpath ...).
Commit 37d69ee308 ("docs: bump minimal GNU Make version to 3.81")
dropped the GNU Make 3.80 support, so we are now allowed to use those
make-builtin helpers.
This conversion will provide better portability without relying on
the pwd command or its location /bin/pwd.
I am intentionally using $(realpath ...) instead $(abspath ...) in
some places. The difference between the two is $(realpath ...)
returns an empty string if the given path does not exist. It is
convenient in places where we need to error-out if the makefile fails
to create an output directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Thierry Reding <treding@nvidia.com>
- fix linker script regression caused by dead code elimination support
- fix typos and outdated comments
- specify kselftest-clean as a PHONY target
- fix "make dtbs_install" when $(srctree) includes shell special
characters like '~'
- Move -fshort-wchar to the global option list because defining it
partially emits warnings
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=m8Zm
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix linker script regression caused by dead code elimination support
- fix typos and outdated comments
- specify kselftest-clean as a PHONY target
- fix "make dtbs_install" when $(srctree) includes shell special
characters like '~'
- Move -fshort-wchar to the global option list because defining it
partially emits warnings
* tag 'kbuild-fixes-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: update comments of Makefile.asm-generic
kbuild: Do not use hyphen in exported variable name
Makefile: add kselftest-clean to PHONY target list
Kbuild: use -fshort-wchar globally
fixdep: trivial: typo fix and correction
kbuild: trivial cleanups on the comments
kbuild: linker script do not match C names unless LD_DEAD_CODE_DATA_ELIMINATION is configured
Commit 971a69db7d ("Xen: don't warn about 2-byte wchar_t in efi")
added the --no-wchar-size-warning to the Makefile to avoid this
harmless warning:
arm-linux-gnueabi-ld: warning: drivers/xen/efi.o uses 2-byte wchar_t yet the output is to use 4-byte wchar_t; use of wchar_t values across objects may fail
Changing kbuild to use thin archives instead of recursive linking
unfortunately brings the same warning back during the final link.
The kernel does not use wchar_t string literals at this point, and
xen does not use wchar_t at all (only efi_char16_t), so the flag
has no effect, but as pointed out by Jan Beulich, adding a wchar_t
string literal would be bad here.
Since wchar_t is always defined as u16, independent of the toolchain
default, always passing -fshort-wchar is correct and lets us
remove the Xen specific hack along with fixing the warning.
Link: https://patchwork.kernel.org/patch/9275217/
Fixes: 971a69db7d ("Xen: don't warn about 2-byte wchar_t in efi")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This is a bunch of trivial fixes and cleanups.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
After removal of DocBook, those targets are bogus.
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- Move generic-y of exported headers to uapi/asm/Kbuild
for complete de-coupling of UAPI
- Clean up scripts/Makefile.headersinst
- Fix host programs for 32 bit machine with XFS file system
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Sw8W
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- Move generic-y of exported headers to uapi/asm/Kbuild for complete
de-coupling of UAPI
- Clean up scripts/Makefile.headersinst
- Fix host programs for 32 bit machine with XFS file system
* tag 'kbuild-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits)
kbuild: Enable Large File Support for hostprogs
kbuild: remove wrapper files handling from Makefile.headersinst
kbuild: split exported generic header creation into uapi-asm-generic
kbuild: do not include old-kbuild-file from Makefile.headersinst
xtensa: move generic-y of exported headers to uapi/asm/Kbuild
unicore32: move generic-y of exported headers to uapi/asm/Kbuild
tile: move generic-y of exported headers to uapi/asm/Kbuild
sparc: move generic-y of exported headers to uapi/asm/Kbuild
sh: move generic-y of exported headers to uapi/asm/Kbuild
parisc: move generic-y of exported headers to uapi/asm/Kbuild
openrisc: move generic-y of exported headers to uapi/asm/Kbuild
nios2: move generic-y of exported headers to uapi/asm/Kbuild
nios2: remove unneeded arch/nios2/include/(generated/)asm/signal.h
microblaze: move generic-y of exported headers to uapi/asm/Kbuild
metag: move generic-y of exported headers to uapi/asm/Kbuild
m68k: move generic-y of exported headers to uapi/asm/Kbuild
m32r: move generic-y of exported headers to uapi/asm/Kbuild
ia64: remove redundant generic-y += kvm_para.h from asm/Kbuild
hexagon: move generic-y of exported headers to uapi/asm/Kbuild
h8300: move generic-y of exported headers to uapi/asm/Kbuild
...
I made the mistake of upgrading my desktop to the new Fedora 26 that
comes with gcc-7.1.1.
There's nothing wrong per se that I've noticed, but I now have 1500
lines of warnings, mostly from the new format-truncation warning
triggering all over the tree.
We use 'snprintf()' and friends in a lot of places, and often know that
the numbers are fairly small (ie a controller index or similar), but gcc
doesn't know that, and sees an 'int', and thinks that it could be some
huge number. And then complains when our buffers are not able to fit
the name for the ten millionth controller.
These warnings aren't necessarily bad per se, and we probably want to
look through them subsystem by subsystem, but at least during the merge
window they just mean that I can't even see if somebody is introducing
any *real* problems when I pull.
So warnings disabled for now.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes the following build error for me when building on an 32 bit
machine using an XFS file system:
$ make scripts/basic/fixdep
HOSTCC scripts/basic/fixdep
fixdep: error fstat'ing depfile: scripts/basic/.fixdep.d: Value too large for defined data type
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When we install headers, we are interested only in headers under uapi
directories. Split out uapi-asm-generic target and make headers_install
depend on it. It will avoid generating unneeded asm-generic wrappers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
We can always pass dst= from the top Makefile. This will simplify
the logic in Makefile.headersinst.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 61562f981e ("uapi: export all arch specifics directories")
changed the dst from asm-<arch> to arch-<arch> for headers_install_all
or headers_check_all. Update the comment.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Thin archives migration by Nicholas Piggin.
THIN_ARCHIVES has been available for a while as an optional feature
only for PowerPC architecture, but we do not need two different
intermediate-artifact schemes.
Using thin archives instead of conventional incremental linking has
various advantages:
- save disk space for builds
- speed-up building a little
- fix some link issues (for example, allyesconfig on ARM) due to
more flexibility for the final linking
- work better with dead code elimination we are planning
As discussed before, this migration has been done unconditionally
so that any problems caused by this will show up with "git bisect".
With testing with 0-day and linux-next, some architectures actually
showed up problems, but they were trivial and all fixed now.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=PAWi
-----END PGP SIGNATURE-----
Merge tag 'kbuild-thinar-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild thin archives updates from Masahiro Yamada:
"Thin archives migration by Nicholas Piggin.
THIN_ARCHIVES has been available for a while as an optional feature
only for PowerPC architecture, but we do not need two different
intermediate-artifact schemes.
Using thin archives instead of conventional incremental linking has
various advantages:
- save disk space for builds
- speed-up building a little
- fix some link issues (for example, allyesconfig on ARM) due to more
flexibility for the final linking
- work better with dead code elimination we are planning
As discussed before, this migration has been done unconditionally so
that any problems caused by this will show up with "git bisect".
With testing with 0-day and linux-next, some architectures actually
showed up problems, but they were trivial and all fixed now"
* tag 'kbuild-thinar-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
tile: remove unneeded extra-y in Makefile
kbuild: thin archives make default for all archs
x86/um: thin archives build fix
tile: thin archives fix linking
ia64: thin archives fix linking
sh: thin archives fix linking
kbuild: handle libs-y archives separately from built-in.o archives
kbuild: thin archives use P option to ar
kbuild: thin archives final link close --whole-archives option
ia64: remove unneeded extra-y in Makefile.gate
tile: fix dependency and .*.cmd inclusion for incremental build
sparc64: Use indirect calls in hamming weight stubs
around. Highlights include:
- Conversion of a bunch of security documentation into RST
- The conversion of the remaining DocBook templates by The Amazing
Mauro Machine. We can now drop the entire DocBook build chain.
- The usual collection of fixes and minor updates.
-----BEGIN PGP SIGNATURE-----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=cVjZ
-----END PGP SIGNATURE-----
Merge tag 'docs-4.13' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"There has been a fair amount of activity in the docs tree this time
around. Highlights include:
- Conversion of a bunch of security documentation into RST
- The conversion of the remaining DocBook templates by The Amazing
Mauro Machine. We can now drop the entire DocBook build chain.
- The usual collection of fixes and minor updates"
* tag 'docs-4.13' of git://git.lwn.net/linux: (90 commits)
scripts/kernel-doc: handle DECLARE_HASHTABLE
Documentation: atomic_ops.txt is core-api/atomic_ops.rst
Docs: clean up some DocBook loose ends
Make the main documentation title less Geocities
Docs: Use kernel-figure in vidioc-g-selection.rst
Docs: fix table problems in ras.rst
Docs: Fix breakage with Sphinx 1.5 and upper
Docs: Include the Latex "ifthen" package
doc/kokr/howto: Only send regression fixes after -rc1
docs-rst: fix broken links to dynamic-debug-howto in kernel-parameters
doc: Document suitability of IBM Verse for kernel development
Doc: fix a markup error in coding-style.rst
docs: driver-api: i2c: remove some outdated information
Documentation: DMA API: fix a typo in a function name
Docs: Insert missing space to separate link from text
doc/ko_KR/memory-barriers: Update control-dependencies example
Documentation, kbuild: fix typo "minimun" -> "minimum"
docs: Fix some formatting issues in request-key.rst
doc: ReSTify keys-trusted-encrypted.txt
doc: ReSTify keys-request-key.txt
...
Original comments is confusing on "OBJ directory", make it clear.
Bonus: move comments close to what it wants to comment.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The thin archives build currently puts all lib.a and built-in.o
files together and links them with --whole-archive.
This works because thin archives can recursively refer to thin
archives. However some architectures include libgcc.a, which may
not be a thin archive, or it may not be constructed with the "P"
option, in which case its contents do not get linked correctly.
So don't pull .a libs into the root built-in.o archive. These
libs should already have symbol tables and indexes built, so they
can be direct linker inputs. Move them out of the --whole-archive
option, which restore the conditional linking behaviour of lib.a
to thin archives builds.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
cc-option uses KBUILD_CFLAGS and KBUILD_CPPFLAGS when it determines
whether an option is supported or not. This is fine for options used to
build the kernel itself, however some components like the x86 boot code
use a different set of flags.
Add the new macro __cc-option which is a more generic version of
cc-option with additional parameters. One parameter is the compiler
with which the check should be performed, the other the compiler options
to be used instead KBUILD_C*FLAGS.
Refactor cc-option and hostcc-option to use __cc-option and move
hostcc-option to scripts/Kbuild.include.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- fix warnings of host programs
- fix "make tags" when COMPILE_SOURCE=1 is specified along with O=
- clarify help message of C=1 option
- fix dependency for ncurses compatibility check
- fix "make headers_install" for fakechroot environment
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=yDPZ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
"Nothing scary, just some random fixes:
- fix warnings of host programs
- fix "make tags" when COMPILED_SOURCE=1 is specified along with O=
- clarify help message of C=1 option
- fix dependency for ncurses compatibility check
- fix "make headers_install" for fakechroot environment"
* tag 'kbuild-fixes-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix sparse warnings in nconfig
kbuild: fix header installation under fakechroot environment
kconfig: Check for libncurses before menuconfig
Kbuild: tiny correction on `make help`
tags: honor COMPILED_SOURCE with apart output directory
genksyms: add printf format attribute to error_with_pos()
There were a few bits and pieces left over from the now-disused DocBook
toolchain; git rid of them.
Reported-by: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
clang generates plenty of these warnings in different parts of the code,
to an extent that the warnings are little more than noise. Disable the
'address-of-packed-member' warning.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 90ac086bca ("Makefile: include arch/*/include/generated/uapi
before .../generated") introduced this for bisect'ability. The commit
chose to promote arch/*/include/generated/uapi in the search path
rather than cleaning stale headers.
After all, we found that approach was not enough, and ended up with
cleaning stale headers by commit cda2c65f98 ("kbuild: Remove stale
asm-generic wrappers").
So, the extra search path is no longer needed because Kbuild invokes
scripts/Makefile.asm-generic and remove stale headers before it starts
descending.
This commit is also reverting commit dc33db7c33 ("Kbuild: avoid
duplicate include path") because we have no more duplicated path.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The help info of `make C=1` is little confusing, make it clear.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This allows to detect -s (--silent) option without checking GNU Make
version.
As commit e36aaea289 ("kbuild: Fix silent builds with make-4")
pointed out, GNU Make 4.x changed the way/order it presents the
command line options into MAKEFLAGS.
In Make 3.8x, 's' is always the first in a group of short options.
The group may be prefixed with '-' in some cases.
In Make 4.x, 's' is always the last in a group of short options.
As commit e6ac89fabd ("kbuild: Correctly deal with make options
which contain an 's'") addressed, we also need to deal with long
options that contain 's', like --warn-undefined-variables.
Test cases:
[1] command line input: make --silent
-> MAKEFLAGS for Make 3.8x: s
-> MAKEFLAGS for Make 4.x : s
[2] command line input: make -srR
-> MAKEFLAGS for Make 3.8x: sRr
-> MAKEFLAGS for Make 4.x : rRs
[3] command line input: make -s -rR --warn-undefined-variables
-> MAKEFLAGS for Make 3.8x: --warn-undefined-variables -sRr
-> MAKEFLAGS for Make 4.x : rRs --warn-undefined-variables
My idea to cater to all the cases more easily is to filter out long
options (--%), then search 's' with $(findstring ...). This way will
be more future-proof even if future versions of Make put 's' in the
middle of the group.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Mauro says:
This patch series convert the remaining DocBooks to ReST.
The first version was originally
send as 3 patch series:
[PATCH 00/36] Convert DocBook documents to ReST
[PATCH 0/5] Convert more books to ReST
[PATCH 00/13] Get rid of DocBook
The lsm book was added as if it were a text file under
Documentation. The plan is to merge it with another file
under Documentation/security, after both this series and
a security Documentation patch series gets merged.
It also adjusts some Sphinx-pedantic errors/warnings on
some kernel-doc markups.
I also added some patches here to add PDF output for all
existing ReST books.
Since commit 61562f981e ("uapi: export all arch specifics
directories"), "make INSTALL_HDR_PATH=$root/usr headers_install"
deletes standard glibc headers and others in $(root)/usr/include.
The cause of the issue is that headers_install now starts descending
from arch/$(hdr-arch)/include/uapi with $(root)/usr/include for its
destination when installing asm headers. So, headers already there
are assumed to be unwanted.
When headers_install starts descending from include/uapi with
$(root)/usr/include for its destination, it works around the problem
by creating an dummy destination $(root)/usr/include/uapi, but this
is tricky.
To fix the problem in a clean way is to skip headers install/check
in include/uapi and arch/$(hdr-arch)/include/uapi because we know
there are only sub-directories in uapi directories. A good side
effect is the empty destination $(root)/usr/include/uapi will go
away.
I am also removing the trailing slash in the headers_check target to
skip checking in arch/$(hdr-arch)/include/uapi.
Fixes: 61562f981e ("uapi: export all arch specifics directories")
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Improvement of headers_install by Nicolas Dichtel.
It has been long since the introduction of uapi directories,
but the de-coupling of exported headers has not been completed.
Headers listed in header-y are exported whether they exist in
uapi directories or not. His work fixes this inconsistency.
All (and only) headers under uapi directories are now exported.
The asm-generic wrappers are still exceptions, but this is a big
step forward.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Rqdo
-----END PGP SIGNATURE-----
Merge tag 'kbuild-uapi-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild UAPI updates from Masahiro Yamada:
"Improvement of headers_install by Nicolas Dichtel.
It has been long since the introduction of uapi directories, but the
de-coupling of exported headers has not been completed. Headers listed
in header-y are exported whether they exist in uapi directories or
not. His work fixes this inconsistency.
All (and only) headers under uapi directories are now exported. The
asm-generic wrappers are still exceptions, but this is a big step
forward"
* tag 'kbuild-uapi-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
arch/include: remove empty Kbuild files
uapi: export all arch specifics directories
uapi: export all headers under uapi directories
smc_diag.h: fix include from userland
btrfs_tree.h: fix include from userland
uapi: includes linux/types.h before exporting files
Makefile.headersinst: remove destination-y option
Makefile.headersinst: cleanup input files
x86: stop exporting msr-index.h to userland
nios2: put setup.h in uapi
h8300: put bitsperlong.h in uapi
- Improve Clang support
- Clean up various Makefiles
- Improve build log visibility (objtool, alpha, ia64)
- Improve compiler flag evaluation for better build performance
- Fix GCC version-dependent warning
- Fix genksyms
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Nka/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- improve Clang support
- clean up various Makefiles
- improve build log visibility (objtool, alpha, ia64)
- improve compiler flag evaluation for better build performance
- fix GCC version-dependent warning
- fix genksyms
* tag 'kbuild-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (23 commits)
kbuild: dtbinst: remove unnecessary __dtbs_install_prep target
ia64: beatify build log for gate.so and gate-syms.o
alpha: make short build log available for division routines
alpha: merge build rules of division routines
alpha: add $(src)/ rather than $(obj)/ to make source file path
Makefile: evaluate LDFLAGS_BUILD_ID only once
objtool: make it visible in make V=1 output
kbuild: clang: add -no-integrated-as to KBUILD_[AC]FLAGS
kbuild: Add support to generate LLVM assembly files
kbuild: Add better clang cross build support
kbuild: drop -Wno-unknown-warning-option from clang options
kbuild: fix asm-offset generation to work with clang
kbuild: consolidate redundant sed script ASM offset generation
frv: Use OFFSET macro in DEF_*REG()
kbuild: avoid conflict between -ffunction-sections and -pg on gcc-4.7
kbuild: Consolidate header generation from ASM offset information
kbuild: use -Oz instead of -Os when using clang
kbuild, LLVMLinux: Add -Werror to cc-option to support clang
Kbuild: make designated_init attribute fatal
kbuild: drop unneeded patterns '.*.orig' and '.*.rej' from distclean
...
This patch removes the need of subdir-y. Now all files/directories under
arch/<arch>/include/uapi/ are exported.
The only change for userland is the layout of the command 'make
headers_install_all': directories asm-<arch> are replaced by arch-<arch>/.
Those new directories contains all files/directories of the specified arch.
Note that only cris and tile have more directories than only asm:
- arch-v[10|32] for cris;
- arch for tile.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add a top-level Makefile help target for Userspace tools.
Also make each help "heading" end with a colon ':'.
Link: http://lkml.kernel.org/r/55c986ff-3966-3e47-2984-7349da2cce51@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Evaluate LDFLAGS_BUILD_ID (which involves invoking the compiler) only
once instead of over and over.
This provides a ~20% reduction in null build time with x86 allnoconfig:
$ make allnoconfig && make -j8
$ perf stat -r5 -e sched:sched_process_exec make -j8
- 2 119 sched:sched_process_exec
+ 1 878 sched:sched_process_exec
- 1,238817018 seconds time elapsed
+ 0,971020553 seconds time elapsed
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
guide for user-space API documents, rather sparsely populated at the
moment, but it's a start. Markus improved the infrastructure for
converting diagrams. Mauro has converted much of the USB documentation
over to RST. Plus the usual set of fixes, improvements, and tweaks.
There's a bit more than the usual amount of reaching out of Documentation/
to fix comments elsewhere in the tree; I have acks for those where I could
get them.
-----BEGIN PGP SIGNATURE-----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=41m+
-----END PGP SIGNATURE-----
Merge tag 'docs-4.12' of git://git.lwn.net/linux
Pull documentation update from Jonathan Corbet:
"A reasonably busy cycle for documentation this time around. There is a
new guide for user-space API documents, rather sparsely populated at
the moment, but it's a start. Markus improved the infrastructure for
converting diagrams. Mauro has converted much of the USB documentation
over to RST. Plus the usual set of fixes, improvements, and tweaks.
There's a bit more than the usual amount of reaching out of
Documentation/ to fix comments elsewhere in the tree; I have acks for
those where I could get them"
* tag 'docs-4.12' of git://git.lwn.net/linux: (74 commits)
docs: Fix a couple typos
docs: Fix a spelling error in vfio-mediated-device.txt
docs: Fix a spelling error in ioctl-number.txt
MAINTAINERS: update file entry for HSI subsystem
Documentation: allow installing man pages to a user defined directory
Doc/PM: Sync with intel_powerclamp code behavior
zr364xx.rst: usb/devices is now at /sys/kernel/debug/
usb.rst: move documentation from proc_usb_info.txt to USB ReST book
convert philips.txt to ReST and add to media docs
docs-rst: usb: update old usbfs-related documentation
arm: Documentation: update a path name
docs: process/4.Coding.rst: Fix a couple of document refs
docs-rst: fix usb cross-references
usb: gadget.h: be consistent at kernel doc macros
usb: composite.h: fix two warnings when building docs
usb: get rid of some ReST doc build errors
usb.rst: get rid of some Sphinx errors
usb/URB.txt: convert to ReST and update it
usb/persist.txt: convert to ReST and add to driver-api book
usb/hotplug.txt: convert to ReST and add to driver-api book
...
The Linux Kernel relies on GCC's acceptance of inline assembly as an
opaque object which will not have any validation performed on the content.
The current behaviour in LLVM is to perform validation of the contents by
means of parsing the input if the MC layer can handle it.
Disable clangs integrated assembler and use the GNU assembler instead.
Wording-mostly-from: Saleem Abdulrasool <compnerd@compnerd.org>
Signed-off-by: Michael Davidson <md@google.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add rules to kbuild in order to generate LLVM assembly files with the .ll
extension when using clang.
# from c code
make CC=clang kernel/pid.ll
Signed-off-by: Vinícius Tinti <viniciustinti@gmail.com>
Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add cross target to CC if using clang. Also add custom gcc toolchain
path for fallback gcc tools.
Clang will fallback to using things like ld, as, and libgcc if
(respectively) one of the llvm linkers isn't available, the integrated
assembler is turned off, or an appropriately cross-compiled version of
compiler-rt isn't available. To this end, you can specify the path to
this fallback gcc toolchain with GCC_TOOLCHAIN.
Signed-off-by: Behan Webster <behanw@converseincode.com>
Reviewed-by: Jan-Simon Möller <dl9pf@gmx.de>
Reviewed-by: Mark Charlebois <charlebm@gmail.com>
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit c3f0d0bc5b ("kbuild, LLVMLinux: Add -Werror to
cc-option to support clang"), cc-option and friends work nicely
for clang.
However, -Wno-unknown-warning-option makes clang happy with any
unknown warning options even if -Werror is specified.
Once -Wno-unknown-warning-option is added, any succeeding call of
cc-disable-warning is evaluated positive, then unknown warning
options are accepted. This should be dropped.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Arnd Bergmann reported:
"When ftrace is enabled and we build with gcc-4.7 or older, we
get a warning for each file on architectures that select
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION:
warning: -ffunction-sections disabled; it makes profiling impossible [enabled by default]
"
Since commit c3f0d0bc5b ("kbuild, LLVMLinux: Add -Werror to
cc-option to support clang"), warnings are treated as errors in
cc-option checks. CC_FLAGS_FTRACE is blindly added to KBUILD_CFLAGS,
so $(call cc-option,-ffunction-sections,) should be moved below it
in order to detect the conflict between the two options.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- Hand-off primary maintainership of Kbuild
- Fix build warnings
- Fix build error when GCOV is enabled with old compiler
- Fix HAVE_ASM_GOTO check when GCC plugin is enabled
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZHIG
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- hand-off primary maintainership of Kbuild
- fix build warnings
- fix build error when GCOV is enabled with old compiler
- fix HAVE_ASM_GOTO check when GCC plugin is enabled
* tag 'kbuild-fixes-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
gconfig: remove misleading parentheses around a condition
jump label: fix passing kbuild_cflags when checking for asm goto support
Kbuild: use cc-disable-warning consistently for maybe-uninitialized
kbuild: external module build warnings when KBUILD_OUTPUT set and W=1
MAINTAINERS: add Masahiro Yamada as a Kbuild maintainer
Documentation/sparse.txt has been moved to
Documentation/dev-tools/sparse.rst
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
If a structure is marked with __attribute__((designated_init)) from
GCC or Sparse, it needs to have all static initializers using designated
initialization. Fail the build for any missing cases. This attribute will
be used by the randstruct plugin to make sure randomized structures are
being correctly initialized.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The latest change of asm goto support check added passing of KBUILD_CFLAGS
to compiler. When these flags reference gcc plugins that are not built yet,
the check fails.
When one runs "make bzImage" followed by "make modules", the kernel is always
built with HAVE_JUMP_LABEL disabled, while the modules are built depending on
CONFIG_JUMP_LABEL. If HAVE_JUMP_LABEL macro happens to be different, modules
are built with undefined references, e.g.:
ERROR: "static_key_slow_inc" [net/netfilter/xt_TEE.ko] undefined!
ERROR: "static_key_slow_dec" [net/netfilter/xt_TEE.ko] undefined!
ERROR: "static_key_slow_dec" [net/netfilter/nft_meta.ko] undefined!
ERROR: "static_key_slow_inc" [net/netfilter/nft_meta.ko] undefined!
ERROR: "nf_hooks_needed" [net/netfilter/ipvs/ip_vs.ko] undefined!
ERROR: "nf_hooks_needed" [net/ipv6/ipv6.ko] undefined!
ERROR: "static_key_count" [net/ipv6/ipv6.ko] undefined!
ERROR: "static_key_slow_inc" [net/ipv6/ipv6.ko] undefined!
This change moves the check before all these references are added
to KBUILD_CFLAGS. This is correct because subsequent KBUILD_CFLAGS
modifications are not relevant to this check.
Reported-by: Anton V. Boyarshinov <boyarsh@altlinux.org>
Fixes: 35f860f9ba ("jump label: pass kbuild_cflags when checking for asm goto support")
Cc: stable@vger.kernel.org # v4.10
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: David Lin <dtwlin@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In commit a76bcf557e ("Kbuild: enable -Wmaybe-uninitialized warning
for "make W=1""), I reverted another change that happened to fix a problem
with old compilers, and now we get this report again with old compilers
(prior to gcc-4.8) and GCOV enabled:
cc1: warnings being treated as errors
drivers/gpu/drm/i915/intel_ringbuffer.c: In function 'intel_ring_setup_status_page':
drivers/gpu/drm/i915/intel_ringbuffer.c:438: error: 'mmio.reg' may be used uninitialized in this function
At top level:
>> cc1: error: unrecognized command line option "-Wno-maybe-uninitialized"
The problem is that we turn off the warning conditionally in a number
of places as we should, but one of them does it unconditionally.
Instead, change it to call cc-disable-warning as we do elsewhere.
The original patch that caused it was merged into linux-4.7, then
4.8 removed the change and 4.9 brought it back, so we probably want
a backport to 4.9 once this is merged.
Use a ':=' assignment instead of '=' to force the cc-disable-warning
call to only be evaluated once instead of every time.
Cc: stable@vger.kernel.org
Fixes: a76bcf557e ("Kbuild: enable -Wmaybe-uninitialized warning for "make W=1"")
Fixes: e72e2dfe7c ("gcov: disable -Wmaybe-uninitialized warning")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The patterns '.*.orig' and '.*.rej' are cleaned away by '*.orig' and
'*.rej' seen two lines above.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Extra gcc checks like W=1 were moved to scripts/Makefile.exrawarn,
so the file name in comment needs to be fixed.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Pull objtool fixes from Ingo Molnar:
"A handful of objtool fixes related to unreachable code, plus a build
fix for out of tree modules"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Enclose contents of unreachable() macro in a block
objtool: Prevent GCC from merging annotate_unreachable()
objtool: Improve detection of BUG() and other dead ends
objtool: Fix CONFIG_STACK_VALIDATION=y warning for out-of-tree modules
Three more DocBook template files have been converted to RST; only 21 to
go. There are various build improvements and the usual array of
documentation improvements and fixes.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJYriFXAAoJEI3ONVYwIuV6iTMP/iV7ownq9IK1f8askcXKM76i
NoRdj4/JywAPQ73vLhOSDVELGdVJNRBjdyOdBRzxPgsqAhFmm79lVYV2eLIffQ2k
7LcVbEQR77I+4z9SwqIVbIWNCBry7Hu8aWh7moDL3I6yeuay408yr5YW2lIlsqHZ
V/LZgkTWDe+iQPeXNA4Djzylx0lcRlAy4yMSLjN1+gb9/uBnXb9J0eGJzgfZfrL8
fiIhymg3bv8vB99l6LMR5vT343QLWXf1yS31A7rPQvwkDo6zFehUJA0XNfIsl2dw
VQYsvl9vp9wy3e6Y0qKXPn1XhAhCrm64P3crBxK31MMvcKZVCfeRSZ78wrvpvewy
MVLlXdqop1bHPHowtRfA5jwxr1NqcYp+Jg0+YGX3iXpPi1Jfk36DNUy9iWvtvIzr
lWgQcIKsdCwwYUcvPR8Kt8T/3q/AHbYlI6mimWlkmbZwncQcgCrH5xSG+c2BIPfV
fn3W6eLHBn8RyVsxlaXlA0Y9TNtI/Cm85b3Ri10pFvhl868ppWfJxXHi7UtcbU58
sQzahISCTXOH/NQwkkh7kFMtczbB43rAcChvF7EUYpazVBpJ4P4HxKFg3eIzIdc6
VlBSaMu1hxUGoYxNNYuKr/nYstuczLOKzK7q4j/JOExY3RgTWP+T3bF02wgubvoa
D/9WfScewkgCJRoA7i17
=C5nd
-----END PGP SIGNATURE-----
Merge tag 'docs-4.11' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A slightly quieter cycle for documentation this time around.
Three more DocBook template files have been converted to RST; only 21
to go. There are various build improvements and the usual array of
documentation improvements and fixes"
* tag 'docs-4.11' of git://git.lwn.net/linux: (44 commits)
docs / driver-api: Fix structure references in device_link.rst
PM / docs: Fix structure references in device.rst
Add a target to check broken external links in the Documentation
Documentation: Fix linux-api list typo
Documentation: DocBook/Makefile comment typo
Improve sparse documentation
Documentation: make Makefile.sphinx no-ops quieter
Documentation: DMA-ISA-LPC.txt
Documentation: input: fix path to input code definitions
docs: Remove the copyright year from conf.py
docs: Fix a warning in the Korean HOWTO.rst translation
PM / sleep / docs: Convert PM notifiers document to reST
PM / core / docs: Convert sleep states API document to reST
PM / core: Update kerneldoc comments in pm.h
doc-rst: Fix recursive make invocation from macros
doc-rst: Delete output of failed dot-SVG conversion
doc-rst: Break shell command sequences on failure
Documentation/sphinx: make targets independent of Sphinx work for HAVE_SPHINX=0
doc-rst: fixed cleandoc target when used with O=dir
Documentation/sphinx: prevent generation of .pyc files in the source tree
...
Pull perf updates from Ingo Molnar:
"On the kernel side the main changes in this cycle were:
- Add Intel Kaby Lake CPU support (Srinivas Pandruvada)
- AMD uncore driver updates for fam17 (Janakarajan Natarajan)
- Intel/PT updates and core events optimizations and cleanups
(Alexander Shishkin)
- cgroups events fixes (David Carrillo-Cisneros)
- kprobes improvements (Masami Hiramatsu)
- ... plus misc fixes and updates.
On the tooling side the main changes were:
- Support clang build in tools/{perf,lib/{bpf,traceevent,api}} with
CC=clang, to, for instance, take advantage of better warnings
(Arnaldo Carvalho de Melo):
- Introduce the 'delta-abs' 'perf diff' compute method, that orders
the histogram entries by the absolute value of the percentage delta
for a function in two perf.data files, i.e. the functions that
changed the most (increase or decrease in samples) comes first
(Namhyung Kim)
- Add support for parsing Intel uncore vendor event files and add
uncore vendor events for the Intel server processors (Haswell,
Broadwell, IvyBridge), Xeon Phi (Knights Landing) and Broadwell DE
(Andi Kleen)
- Introduce 'perf ftrace' a perf front end to the kernel's ftrace
function and function_graph tracer, defaulting to the
"function_graph" tracer, more work will be done in reviving this
effort, forward porting it from its initial patch submission
(Namhyung Kim)
- Add 'e' and 'c' hotkeys to expand/collapse call chains for a single
hist entry in the 'perf report' and 'perf top' TUI (Jiri Olsa)
- Account thread wait time (off CPU time) separately: sleep, iowait
and preempt, based on the prev_state of the last event, show the
breakdown when using "perf sched timehist --state" (Namhyumg Kim)
- Add more triggers to switch the output file (perf.data.TIMESTAMP).
Now, in addition to switching to a different output file when
receiving a SIGUSR2, one can also specify file size and time based
triggers:
perf record -a --switch-output=signal
is equivalent to what we had before:
perf record -a --switch-output
While we can also ask for the file to be "sliced" by size, taking
into account that that will happen only when we get woken up by the
kernel, i.e. one has to take into account the --mmap-pages (the
size of the perf mmap ring buffer):
perf record -a --switch-output=2G
will break the perf.data output into multiple files limited to 2GB
of samples, right when generating the output.
For time based samples, alert() will be used, so to have 1 minute
limited perf.data output files:
perf record -a --switch-output=1m
(Jiri Olsa)
- Improve 'perf trace' (Arnaldo Carvalho de Melo)
- 'perf kallsyms' toy tool to look for extended symbol information on
the running kernel and demonstrate the machine/thread/symbol APIs
for use in other tools, such as 'perf probe' (Arnaldo Carvalho de
Melo)
- ... plus tons of other changes, see the shortlog and Git log for
details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (131 commits)
perf tools: Add missing parse_events_error() prototype
perf pmu: Fix check for unset alias->unit array
perf tools: Be consistent on the type of map->symbols[] interator
perf intel pt decoder: clang has no -Wno-override-init
perf evsel: Do not put a variable sized type not at the end of a struct
perf probe: Avoid accessing uninitialized 'map' variable
perf tools: Do not put a variable sized type not at the end of a struct
perf record: Do not put a variable sized type not at the end of a struct
perf tests: Synthesize struct instead of using field after variable sized type
perf bench numa: Make sure dprintf() is not defined
Revert "perf bench futex: Sanitize numeric parameters"
tools lib subcmd: Make it an error to pass a signed value to OPTION_UINTEGER
tools: Set the maximum optimization level according to the compiler being used
tools: Suppress request for warning options not existent in clang
samples/bpf: Reset global variables
samples/bpf: Ignore already processed ELF sections
samples/bpf: Add missing header
perf symbols: dso->name is an array, no need to check it against NULL
perf tests record: No need to test an array against NULL
perf symbols: No need to check if sym->name is NULL
...
When building a CONFIG_STACK_VALIDATION enabled kernel without the
libelf devel package installed, the Makefile prints a warning:
"Cannot use CONFIG_STACK_VALIDATION, please install libelf-dev, libelf-devel or elfutils-libelf-devel"
But when building an out-of-tree module, the warning doesn't show.
Instead it tries to use objtool, and the build fails with:
/bin/sh: ./tools/objtool/objtool: No such file or directory
Make sure the warning and the disabling of objtool occur in all cases,
by moving the CONFIG_STACK_VALIDATION checks outside the 'ifeq
($(KBUILD_EXTMOD),)' block in the Makefile.
Tested-By: Marc MERLIN <marc@merlins.org>
Suggested-by: Jessica Yu <jeyu@redhat.com>
Reported-by: Marc MERLIN <marc@merlins.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Jessica Yu <jeyu@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 3b27a0c85d ("objtool: Detect and warn if libelf is missing and don't break the build")
Link: http://lkml.kernel.org/r/b3088ae4a8698143d4851965793c61fec2135b1f.1487182864.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Documentation shouldn't have broken links.
sphinx linkcheck builder scans all documents for external links, tries
to open them with urllib2, and writes an overview which ones are broken
and redirected to standard output and to output.txt in the output
directory.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rémy Léone <remy.leone@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Some versions of ARM GCC compiler such as Android toolchain throws in a
'-fpic' flag by default. This causes the gcc-goto check script to fail
although some config would have '-fno-pic' flag in the KBUILD_CFLAGS.
This patch passes the KBUILD_CFLAGS to the check script so that the
script does not rely on the default config from different compilers.
Link: http://lkml.kernel.org/r/20170120234329.78868-1-dtwlin@google.com
Signed-off-by: David Lin <dtwlin@google.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Michal Marek <mmarek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
New features:
. Allow configuring a 'perf ftrace' default --tracer (Taeung Song)
Infrastructure:
. Sync tools/arch/{powerpc,arm}/include/uapi/asm/kvm.h and
tools/arch/x86/include/asm/cpufeatures.h (Ingo Molnar)
. Add BPF program file system pinning APIs and respective
'perf test' entry (Joe Stringer)
. Make tools tree support 'make -s' (Josh Poimboeuf)
. Reference count maps in callchains, fixing SEGFAULT when
referencing maps after it is freed (Krister Johansen)
. Create for_each_event trace points iterator (Taeung Song)
. Do not consider an error not to have any perfconfig file
(Arnaldo Carvalho de Melo
. Propagate perf_config() errors (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=OCSZ
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.11-20170201' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New features:
- Allow configuring a 'perf ftrace' default --tracer (Taeung Song)
Infrastructure changes:
- Sync tools/arch/{powerpc,arm}/include/uapi/asm/kvm.h and
tools/arch/x86/include/asm/cpufeatures.h (Ingo Molnar)
- Add BPF program file system pinning APIs and respective
'perf test' entry (Joe Stringer)
- Make tools tree support 'make -s' (Josh Poimboeuf)
- Reference count maps in callchains, fixing SEGFAULT when
referencing maps after it is freed (Krister Johansen)
- Create for_each_event trace points iterator (Taeung Song)
- Do not consider an error not to have any perfconfig file
(Arnaldo Carvalho de Melo
- Propagate perf_config() errors (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When doing a kernel build with 'make -s', everything is silenced except
the objtool build. That's because the tools tree support for silent
builds is some combination of missing and broken.
Three changes are needed to fix it:
- Makefile: propagate '-s' to the sub-make's MAKEFLAGS variable so the
tools Makefiles can see it.
- tools/scripts/Makefile.include: fix the tools Makefiles' ability to
recognize '-s'. The MAKE_VERSION and MAKEFLAGS checks are copied from
the top-level Makefile. This silences the "DESCEND objtool" message.
- tools/build/Makefile.build: add support to the tools Build files for
recognizing '-s'. Again the MAKE_VERSION and MAKEFLAGS checks are
copied from the top-level Makefile. This silences all the object
compile/link messages.
Reported-and-Tested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michal Marek <mmarek@suse.com>
Link: http://lkml.kernel.org/r/e8967562ef640c3ae9a76da4ae0f4e47df737c34.1484799200.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building a specific target such as bzImage, modules aren't normally
built. However if CONFIG_TRIM_UNUSED_KSYMS is enabled, no built modules
means none of the exported symbols are used and therefore they will all
be trimmed away from the final kernel. A subsequent "make modules" will
fail because modpost cannot find the needed symbols for those modules in
the kernel binary.
Let's make sure modules are also built whenever CONFIG_TRIM_UNUSED_KSYMS
is enabled and that the kernel binary is properly rebuilt accordingly.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some people are able to trigger a race where autoksyms.h is used before
its empty version is even created. Let's create it at the same time as
the directory holding it is created.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Tested-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull kbuild fixes from Michal Marek:
"Here are some regression fixes for kbuild:
- modversion support for exported asm symbols (Nick Piggin). The
affected architectures need separate patches adding
asm-prototypes.h.
- fix rebuilds of lib-ksyms.o (Nick Piggin)
- -fno-PIE builds (Sebastian Siewior and Borislav Petkov). This is
not a kernel regression, but one of the Debian gcc package.
Nevertheless, it's quite annoying, so I think it should go into
mainline and stable now"
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Steal gcc's pie from the very beginning
kbuild: be more careful about matching preprocessed asm ___EXPORT_SYMBOL
x86/kexec: add -fno-PIE
scripts/has-stack-protector: add -fno-PIE
kbuild: add -fno-PIE
kbuild: modversions for EXPORT_SYMBOL() for asm
kbuild: prevent lib-ksyms.o rebuilds
So Sebastian turned off the PIE for kernel builds but that was too late
- Kbuild.include already uses KBUILD_CFLAGS and trying to disable gcc
options with, say cc-disable-warning, fails:
gcc -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs
...
-Wno-sign-compare -fno-asynchronous-unwind-tables -Wframe-address -c -x c /dev/null -o .31392.tmp
/dev/null:1:0: error: code model kernel does not support PIC mode
because that returns an error and we can't disable the warning. For
example in this case:
KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,)
which leads to gcc issuing all those warnings again.
So let's turn off PIE/PIC at the earliest possible moment, when we
declare KBUILD_CFLAGS so that cc-disable-warning picks it up too.
Also, we need the $(call cc-option ...) because -fno-PIE is supported
since gcc v3.4 and our lowest supported gcc version is 3.2 right now.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
Traditionally, we have always had warnings about uninitialized variables
enabled, as this is part of -Wall, and generally a good idea [1], but it
also always produced false positives, mainly because this is a variation
of the halting problem and provably impossible to get right in all cases
[2].
Various people have identified cases that are particularly bad for false
positives, and in commit e74fc973b6 ("Turn off -Wmaybe-uninitialized
when building with -Os"), I turned off the warning for any build that
was done with CC_OPTIMIZE_FOR_SIZE. This drastically reduced the number
of false positive warnings in the default build but unfortunately had
the side effect of turning the warning off completely in 'allmodconfig'
builds, which in turn led to a lot of warnings (both actual bugs, and
remaining false positives) to go in unnoticed.
With commit 877417e6ff ("Kbuild: change CC_OPTIMIZE_FOR_SIZE
definition") enabled the warning again for allmodconfig builds in v4.7
and in v4.8-rc1, I had finally managed to address all warnings I get in
an ARM allmodconfig build and most other maybe-uninitialized warnings
for ARM randconfig builds.
However, commit 6e8d666e92 ("Disable "maybe-uninitialized" warning
globally") was merged at the same time and disabled it completely for
all configurations, because of false-positive warnings on x86 that I had
not addressed until then. This caused a lot of actual bugs to get
merged into mainline, and I sent several dozen patches for these during
the v4.9 development cycle. Most of these are actual bugs, some are for
correct code that is safe because it is only called under external
constraints that make it impossible to run into the case that gcc sees,
and in a few cases gcc is just stupid and finds something that can
obviously never happen.
I have now done a few thousand randconfig builds on x86 and collected
all patches that I needed to address every single warning I got (I can
provide the combined patch for the other warnings if anyone is
interested), so I hope we can get the warning back and let people catch
the actual bugs earlier.
This reverts the change to disable the warning completely and for now
brings it back at the "make W=1" level, so we can get it merged into
mainline without introducing false positives. A follow-up patch enables
it on all levels unless some configuration option turns it off because
of false-positives.
Link: https://rusty.ozlabs.org/?p=232 [1]
Link: https://gcc.gnu.org/wiki/Better_Uninitialized_Warnings [2]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Debian started to build the gcc with -fPIE by default so the kernel
build ends before it starts properly with:
|kernel/bounds.c:1:0: error: code model kernel does not support PIC mode
Also add to KBUILD_AFLAGS due to:
|gcc -Wp,-MD,arch/x86/entry/vdso/vdso32/.note.o.d … -mfentry -DCC_USING_FENTRY … vdso/vdso32/note.S
|arch/x86/entry/vdso/vdso32/note.S:1:0: sorry, unimplemented: -mfentry isn’t supported for 32-bit in combination with -fpic
Tagging it stable so it is possible to compile recent stable kernels as
well.
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
This update consists of:
- Fixes and improvements to existing tests
- Moving code from Documentation to selftests, samples, and tools.
Moves dnotify_test, prctl, ptp, vDSO, ia64, watchdog, and networking
tests from Documentation to selftests.
Moves mic/mpssd, misc-devices/mei, timers, watchdog, auxdisplay, and
blackfin examples from Documentation to samples.
Moves accounting, laptops/dslm, and pcmcia/crc32hash tools from
Documentation to tools.
Deletes BUILD_DOCSRC and its dependencies.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=60kH
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.9-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
"This update consists of:
- Fixes and improvements to existing tests
- Moving code from Documentation to selftests, samples, and tools:
* Moves dnotify_test, prctl, ptp, vDSO, ia64, watchdog, and
networking tests from Documentation to selftests.
* Moves mic/mpssd, misc-devices/mei, timers, watchdog, auxdisplay,
and blackfin examples from Documentation to samples.
* Moves accounting, laptops/dslm, and pcmcia/crc32hash tools from
Documentation to tools.
* Deletes BUILD_DOCSRC and its dependencies"
* tag 'linux-kselftest-4.9-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (21 commits)
selftests/futex: Check ANSI terminal color support
Doc: update 00-INDEX files to reflect the runnable code move
samples: move blackfin gptimers-example from Documentation
tools: move pcmcia crc32hash tool from Documentation
tools: move laptops dslm tool from Documentation
tools: move accounting tool from Documentation
samples: move auxdisplay example code from Documentation
samples: move watchdog example code from Documentation
samples: move timers example code from Documentation
samples: move misc-devices/mei example code from Documentation
samples: move mic/mpssd example code from Documentation
selftests: Move networking/timestamping from Documentation
selftests: move watchdog tests from Documentation/watchdog
selftests: move ia64 tests from Documentation/ia64
selftests: move vDSO tests from Documentation/vDSO
selftests: move ptp tests from Documentation/ptp
selftests: move prctl tests from Documentation/prctl
selftests: move dnotify_test from Documentation/filesystems
selftests/timers: Add missing error code assignment before test
selftests/zram: replace ZRAM_LZ4_COMPRESS
...
Pull kbuild updates from Michal Marek:
- EXPORT_SYMBOL for asm source by Al Viro.
This does bring a regression, because genksyms no longer generates
checksums for these symbols (CONFIG_MODVERSIONS). Nick Piggin is
working on a patch to fix this.
Plus, we are talking about functions like strcpy(), which rarely
change prototypes.
- Fixes for PPC fallout of the above by Stephen Rothwell and Nick
Piggin
- fixdep speedup by Alexey Dobriyan.
- preparatory work by Nick Piggin to allow architectures to build with
-ffunction-sections, -fdata-sections and --gc-sections
- CONFIG_THIN_ARCHIVES support by Stephen Rothwell
- fix for filenames with colons in the initramfs source by me.
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (22 commits)
initramfs: Escape colons in depfile
ppc: there is no clear_pages to export
powerpc/64: whitelist unresolved modversions CRCs
kbuild: -ffunction-sections fix for archs with conflicting sections
kbuild: add arch specific post-link Makefile
kbuild: allow archs to select link dead code/data elimination
kbuild: allow architectures to use thin archives instead of ld -r
kbuild: Regenerate genksyms lexer
kbuild: genksyms fix for typeof handling
fixdep: faster CONFIG_ search
ia64: move exports to definitions
sparc32: debride memcpy.S a bit
[sparc] unify 32bit and 64bit string.h
sparc: move exports to definitions
ppc: move exports to definitions
arm: move exports to definitions
s390: move exports to definitions
m68k: move exports to definitions
alpha: move exports to actual definitions
x86: move exports to actual definitions
...
This affectively reverts commit 377ccbb483 ("Makefile: Mute warning
for __builtin_return_address(>0) for tracing only") because it turns out
that it really isn't tracing only - it's all over the tree.
We already also had the warning disabled separately for mm/usercopy.c
(which this commit also removes), and it turns out that we will also
want to disable it for get_lock_parent_ip(), that is used for at least
TRACE_IRQFLAGS. Which (when enabled) ends up being all over the tree.
Steven Rostedt had a patch that tried to limit it to just the config
options that actually triggered this, but quite frankly, the extra
complexity and abstraction just isn't worth it. We have never actually
had a case where the warning is actually useful, so let's just disable
it globally and not worry about it.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move blackfin gptimers-example to samples and remove it from Documentation
Makefile. Update samples Kconfig and Makefile to build gptimers-example.
blackfin is the last CONFIG_BUILD_DOCSRC target in Documentation/Makefile.
Hence this patch also includes changes to remove CONFIG_BUILD_DOCSRC from
Makefile and lib/Kconfig.debug and updates VIDEO_PCI_SKELETON dependency
on BUILD_DOCSRC.
Documentation/Makefile is not deleted to avoid braking make htmldocs and
make distclean.
Acked-by: Michal Marek <mmarek@suse.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The Sphinx transition is still creating a fair amount of work. Here we
have a number of fixes and, importantly, a proper PDF output solution,
thanks to Jani Nikula, Mauro Carvalho Chehab and Markus Heiser.
I've started a couple of new books: a driver API book (based on the old
device-drivers.tmpl) and a development tools book. Both are meant to show
how we can integrate together our existing documentation into a more
coherent and accessible whole. It involves moving some stuff around and
formatting changes, but, I think, the results are worth it. The good news
is that most of our existing Documentation/*.txt files are *almost* in RST
format already; the amount of messing around required is minimal.
And, of course, there's the usual set of updates, typo fixes, and more.
-----BEGIN PGP SIGNATURE-----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=kGKl
-----END PGP SIGNATURE-----
Merge tag 'docs-4.9' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"This is the documentation update pull for the 4.9 merge window.
The Sphinx transition is still creating a fair amount of work. Here we
have a number of fixes and, importantly, a proper PDF output solution,
thanks to Jani Nikula, Mauro Carvalho Chehab and Markus Heiser.
I've started a couple of new books: a driver API book (based on the
old device-drivers.tmpl) and a development tools book. Both are meant
to show how we can integrate together our existing documentation into
a more coherent and accessible whole. It involves moving some stuff
around and formatting changes, but, I think, the results are worth it.
The good news is that most of our existing Documentation/*.txt files
are *almost* in RST format already; the amount of messing around
required is minimal.
And, of course, there's the usual set of updates, typo fixes, and
more"
* tag 'docs-4.9' of git://git.lwn.net/linux: (120 commits)
URL changed for Linux Foundation TAB
dax : Fix documentation with respect to struct pages
iio: Documentation: Correct the path used to create triggers.
docs: Remove space-before-label guidance from CodingStyle
docs-rst: add inter-document cross references
Documentation/email-clients.txt: convert it to ReST markup
Documentation/kernel-docs.txt: reorder based on timestamp
Documentation/kernel-docs.txt: Add dates for online docs
Documentation/kernel-docs.txt: get rid of broken docs
Documentation/kernel-docs.txt: move in-kernel docs
Documentation/kernel-docs.txt: remove more legacy references
Documentation/kernel-docs.txt: add two published books
Documentation/kernel-docs.txt: sort books per publication date
Documentation/kernel-docs.txt: adjust LDD references
Documentation/kernel-docs.txt: some improvements on the ReST output
Documentation/kernel-docs.txt: Consistent indenting: 4 spaces
Documentation/kernel-docs.txt: Add 4 paper/book references
Documentation/kernel-docs.txt: Improve layouting of book list
Documentation/kernel-docs.txt: Remove offline or outdated entries
docs: Clean up bare :: lines
...
Allow architectures to create arch/xxx/Makefile.postlink with targets
for vmlinux, modules.ko, and clean, which will be invoked after final
linking of vmlinux and modules.
powerpc will use this to check vmlinux linker relocations for sanity,
and may use it to fix up alternate instruction patch branch addresses.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Introduce LD_DEAD_CODE_DATA_ELIMINATION option for architectures to
select to build with -ffunction-sections, -fdata-sections, and link
with --gc-sections. It requires some work (documented) to ensure all
unreferenced entrypoints are live, and requires toolchain and build
verification, so it is made a per-arch option for now.
On a random powerpc64le build, this yelds a significant size saving,
it boots and runs fine, but there is a lot I haven't tested as yet, so
these savings may be reduced if there are bugs in the link.
text data bss dec filename
11169741 1180744 1923176 14273661 vmlinux
10445269 1004127 1919707 13369103 vmlinux.dce
~700K text, ~170K data, 6% removed from kernel image size.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Sphinx supports LaTeX output. Sometimes, it is interesting to
call it directly, instead of also generating a PDF. As it comes
for free, add a target for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
When the compiler doesn't support gcc plugins (either due to missing
headers or too old a version), report the problem and abort the build
instead of emitting a warning and letting the build founder with arcane
compiler errors.
Signed-off-by: Kees Cook <keescook@chromium.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=odtg
-----END PGP SIGNATURE-----
Merge tag 'media/v4.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media DocBook removal and some fixups from Mauro Carvalho Chehab:
- removal of the media DocBook (since it's all in Sphinx now)
- videobuf2: Fix an allocation regression
- a few fixes related to the CEC drivers
* tag 'media/v4.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] cec: fix off-by-one memset
[media] staging: add MEDIA_SUPPORT dependency
[media] vivid: don't handle CEC_MSG_SET_STREAM_PATH
[media] media: adv7180: Fix broken interrupt register access
[media] vb2: Fix allocation size of dma_parms
[media] vim2m: copy the other colorspace-related fields as well
[media] adv7511: fix VIC autodetect
doc-rst: Remove the media docbook
. Move the suppressing of the __builtin_return_address >0 warning to the
tracing directory only.
. metag recordmcount fix for newer glibc's
. Two tracing histogram fixes that were reported by KASAN
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXofc2AAoJEKKk/i67LK/8f7YIAI7YkUnzA7VZ/FmbgD+fu3MI
XmLLb98dzEOEHKEUrmv/9TSj/W6cTVfgVH2z/U89J6nbPj56GgMf03qL1wn9l/6s
kwxEt5GopmKwCdtnjGkLYZcg13OWottzmFoyn/koKCXFq7PwfGQdLzhwIQUpsXgG
MxOk1Iv9TbACzz4k5aG866yhJu6cWDRSdC3cfv7F4xn+Z3GWggzCpW7fknXy66cJ
iVsdUGZVz5O5jVJAFqzERZHBJQpraozjkKr3lprCdHuXa/EEAYQuuYG5WBxggYaQ
eJ1my2p5MKkxORz1Nk9cGuFa6DW35spn9+iOOyTt6sRU/8tijGxTPLNWtKfJcVQ=
=fbRU
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"A few updates and fixes:
- move the suppressing of the __builtin_return_address >0 warning to
the tracing directory only.
- metag recordmcount fix for newer glibc's
- two tracing histogram fixes that were reported by KASAN"
* tag 'trace-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix use-after-free in hist_register_trigger()
tracing: Fix use-after-free in hist_unreg_all/hist_enable_unreg_all
Makefile: Mute warning for __builtin_return_address(>0) for tracing only
ftrace/recordmcount: Work around for addition of metag magic but not relocations
Pull kbuild updates from Michal Marek:
- GCC plugin support by Emese Revfy from grsecurity, with a fixup from
Kees Cook. The plugins are meant to be used for static analysis of
the kernel code. Two plugins are provided already.
- reduction of the gcc commandline by Arnd Bergmann.
- IS_ENABLED / IS_REACHABLE macro enhancements by Masahiro Yamada
- bin2c fix by Michael Tautschnig
- setlocalversion fix by Wolfram Sang
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
gcc-plugins: disable under COMPILE_TEST
kbuild: Abort build on bad stack protector flag
scripts: Fix size mismatch of kexec_purgatory_size
kbuild: make samples depend on headers_install
Kbuild: don't add obj tree in additional includes
Kbuild: arch: look for generated headers in obtree
Kbuild: always prefix objtree in LINUXINCLUDE
Kbuild: avoid duplicate include path
Kbuild: don't add ../../ to include path
vmlinux.lds.h: replace config_enabled() with IS_ENABLED()
kconfig.h: allow to use IS_{ENABLE,REACHABLE} in macro expansion
kconfig.h: use already defined macros for IS_REACHABLE() define
export.h: use __is_defined() to check if __KSYM_* is defined
kconfig.h: use __is_defined() to check if MODULE is defined
kbuild: setlocalversion: print error to STDERR
Add sancov plugin
Add Cyclomatic complexity GCC plugin
GCC plugin infrastructure
Shared library support
With the latest gcc compilers, they give a warning if
__builtin_return_address() parameter is greater than 0. That is because if
it is used by a function called by a top level function (or in the case of
the kernel, by assembly), it can try to access stack frames outside the
stack and crash the system.
The tracing system uses __builtin_return_address() of up to 2! But it is
well aware of the dangers that it may have, and has even added precautions
to protect against it (see the thunk code in arch/x86/entry/thunk*.S)
Linus originally added KBUILD_CFLAGS that would suppress the warning for the
entire kernel, as simply adding KBUILD_CFLAGS to the tracing directory
wouldn't work. The tracing directory plays a bit with the CFLAGS and
requires a little more logic.
This adds that special logic to only suppress the warning for the tracing
directory. If it is used anywhere else outside of tracing, the warning will
still be triggered.
Link: http://lkml.kernel.org/r/20160728223043.51996267@grimm.local.home
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that all media documentation was converted to Sphinx, we
should get rid of the old DocBook one, as we don't want people
to submit patches against the old stuff.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Newer versions of gcc warn about the use of __builtin_return_address()
with a non-zero argument when "-Wall" is specified:
kernel/trace/trace_irqsoff.c: In function ‘stop_critical_timings’:
kernel/trace/trace_irqsoff.c:433:86: warning: calling ‘__builtin_return_address’ with a nonzero argument is unsafe [-Wframe-address]
stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1);
[ .. repeats a few times for other similar cases .. ]
It is true that a non-zero argument is somewhat dangerous, and we do not
actually have very many uses of that in the kernel - but the ftrace code
does use it, and as Stephen Rostedt says:
"We are well aware of the danger of using __builtin_return_address() of
> 0. In fact that's part of the reason for having the "thunk" code in
x86 (See arch/x86/entry/thunk_{64,32}.S). [..] it adds extra frames
when tracking irqs off sections, to prevent __builtin_return_address()
from accessing bad areas. In fact the thunk_32.S states: 'Trampoline to
trace irqs off. (otherwise CALLER_ADDR1 might crash)'."
For now, __builtin_return_address() with a non-zero argument is the best
we can do, and the warning is not helpful and can end up making people
miss other warnings for real problems.
So disable the frame-address warning on compilers that need it.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Several build configurations had already disabled this warning because
it generates a lot of false positives. But some had not, and it was
still enabled for "allmodconfig" builds, for example.
Looking at the warnings produced, every single one I looked at was a
false positive, and the warnings are frequent enough (and big enough)
that they can easily hide real problems that you don't notice in the
noise generated by -Wmaybe-uninitialized.
The warning is good in theory, but this is a classic case of a warning
that causes more problems than the warning can solve.
If gcc gets better at avoiding false positives, we may be able to
re-enable this warning. But as is, we're better off without it, and I
want to be able to see the *real* warnings.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge updates from Andrew Morton:
- a few misc bits
- ocfs2
- most(?) of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (125 commits)
thp: fix comments of __pmd_trans_huge_lock()
cgroup: remove unnecessary 0 check from css_from_id()
cgroup: fix idr leak for the first cgroup root
mm: memcontrol: fix documentation for compound parameter
mm: memcontrol: remove BUG_ON in uncharge_list
mm: fix build warnings in <linux/compaction.h>
mm, thp: convert from optimistic swapin collapsing to conservative
mm, thp: fix comment inconsistency for swapin readahead functions
thp: update Documentation/{vm/transhuge,filesystems/proc}.txt
shmem: split huge pages beyond i_size under memory pressure
thp: introduce CONFIG_TRANSPARENT_HUGE_PAGECACHE
khugepaged: add support of collapse for tmpfs/shmem pages
shmem: make shmem_inode_info::lock irq-safe
khugepaged: move up_read(mmap_sem) out of khugepaged_alloc_page()
thp: extract khugepaged from mm/huge_memory.c
shmem, thp: respect MADV_{NO,}HUGEPAGE for file mappings
shmem: add huge pages support
shmem: get_unmapped_area align huge page
shmem: prepare huge= mount option and sysfs knob
mm, rmap: account shmem thp pages
...
Before, the stack protector flag was sanity checked before .config had
been reprocessed. This meant the build couldn't be aborted early, and
only a warning could be emitted followed later by the compiler blowing
up with an unknown flag. This has caused a lot of confusion over time,
so this splits the flag selection from sanity checking and performs the
sanity checking after the make has been restarted from a reprocessed
.config, so builds can be aborted as early as possible now.
Additionally moves the x86-specific sanity check to the same location,
since it suffered from the same warn-then-wait-for-compiler-failure
problem.
Link: http://lkml.kernel.org/r/20160712223043.GA11664@www.outflux.net
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Before, the stack protector flag was sanity checked before .config had
been reprocessed. This meant the build couldn't be aborted early, and
only a warning could be emitted followed later by the compiler blowing
up with an unknown flag. This has caused a lot of confusion over time,
so this splits the flag selection from sanity checking and performs the
sanity checking after the make has been restarted from a reprocessed
.config, so builds can be aborted as early as possible now.
Additionally moves the x86-specific sanity check to the same location,
since it suffered from the same warn-then-wait-for-compiler-failure
problem.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
documentation mechanism based on the Sphinx system. The objectives here
are to make it easier to create better-integrated (and more attractive)
documents while (eventually) dumping our one-of-a-kind, cobbled-together
system for something that is widely used and maintained by others. There's
a fair amount of information what's being done, why, and how to use it in:
https://lwn.net/Articles/692704/https://lwn.net/Articles/692705/
Closer to home, Documentation/kernel-documentation.rst describes how it
works.
For now, the new system exists alongside the old one; you should soon see
the GPU documentation converted over in the DRM pull and some significant
media conversion work as well. Once all the docs have been moved over and
we're convinced that the rough edges (of which are are a few) have been
smoothed over, the DocBook-based stuff should go away.
Primary credit is to Jani Nikula for doing the heavy lifting to make this
stuff actually work; there has also been notable effort from Markus Heiser,
Daniel Vetter, and Mauro Carvalho Chehab.
Expect a couple of conflicts on the new index.rst file over the course of
the merge window; they are trivially resolvable. That file may be a bit of
a conflict magnet in the short term, but I don't expect that situation to
last for any real length of time.
Beyond that, of course, we have the usual collection of tweaks, updates,
and typo fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=4fDK
-----END PGP SIGNATURE-----
Merge tag 'docs-for-linus' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Some big changes this month, headlined by the addition of a new
formatted documentation mechanism based on the Sphinx system.
The objectives here are to make it easier to create better-integrated
(and more attractive) documents while (eventually) dumping our
one-of-a-kind, cobbled-together system for something that is widely
used and maintained by others. There's a fair amount of information
what's being done, why, and how to use it in:
https://lwn.net/Articles/692704/https://lwn.net/Articles/692705/
Closer to home, Documentation/kernel-documentation.rst describes how
it works.
For now, the new system exists alongside the old one; you should soon
see the GPU documentation converted over in the DRM pull and some
significant media conversion work as well. Once all the docs have
been moved over and we're convinced that the rough edges (of which are
are a few) have been smoothed over, the DocBook-based stuff should go
away.
Primary credit is to Jani Nikula for doing the heavy lifting to make
this stuff actually work; there has also been notable effort from
Markus Heiser, Daniel Vetter, and Mauro Carvalho Chehab.
Expect a couple of conflicts on the new index.rst file over the course
of the merge window; they are trivially resolvable. That file may be
a bit of a conflict magnet in the short term, but I don't expect that
situation to last for any real length of time.
Beyond that, of course, we have the usual collection of tweaks,
updates, and typo fixes"
* tag 'docs-for-linus' of git://git.lwn.net/linux: (77 commits)
doc-rst: kernel-doc: fix handling of address_space tags
Revert "doc/sphinx: Enable keep_warnings"
doc-rst: kernel-doc directive, fix state machine reporter
docs: deprecate kernel-doc-nano-HOWTO.txt
doc/sphinx: Enable keep_warnings
Documentation: add watermark_scale_factor to the list of vm systcl file
kernel-doc: Fix up warning output
docs: Get rid of some kernel-documentation warnings
doc-rst: add an option to ignore DocBooks when generating docs
workqueue: Fix a typo in workqueue.txt
Doc: ocfs: Fix typo in filesystems/ocfs2-online-filecheck.txt
Documentation/sphinx: skip build if user requested specific DOCBOOKS
Documentation: add cleanmediadocs to the documentation targets
Add .pyc files to .gitignore
Doc: PM: Fix a typo in intel_powerclamp.txt
doc-rst: flat-table directive - initial implementation
Documentation: add meta-documentation for Sphinx and kernel-doc
Documentation: tiny typo fix in usb/gadget_multi.txt
Documentation: fix wrong value in md.txt
bcache: documentation formatting, edited for clarity, stripe alignment notes
...
Pull perf updates from Ingo Molnar:
"With over 300 commits it's been a busy cycle - with most of the work
concentrated on the tooling side (as it should).
The main kernel side enhancements were:
- Add per event callchain limit: Recently we introduced a sysctl to
tune the max-stack for all events for which callchains were
requested:
$ sysctl kernel.perf_event_max_stack
kernel.perf_event_max_stack = 127
Now this patch introduces a way to configure this per event, i.e.
this becomes possible:
$ perf record -e sched:*/max-stack=2/ -e block:*/max-stack=10/ -a
allowing finer tuning of how much buffer space callchains use.
This uses an u16 from the reserved space at the end, leaving
another u16 for future use.
There has been interest in even finer tuning, namely to control the
max stack for kernel and userspace callchains separately. Further
discussion is needed, we may for instance use the remaining u16 for
that and when it is present, assume that the sample_max_stack
introduced in this patch applies for the kernel, and the u16 left
is used for limiting the userspace callchain (Arnaldo Carvalho de
Melo)
- Optimize AUX event (hardware assisted side-band event) delivery
(Kan Liang)
- Rework Intel family name macro usage (this is partially x86 arch
work) (Dave Hansen)
- Refine and fix Intel LBR support (David Carrillo-Cisneros)
- Add support for Intel 'TopDown' events (Andi Kleen)
- Intel uncore PMU driver fixes and enhancements (Kan Liang)
- ... other misc changes.
Here's an incomplete list of the tooling enhancements (but there's
much more, see the shortlog and the git log for details):
- Support cross unwinding, i.e. collecting '--call-graph dwarf'
perf.data files in one machine and then doing analysis in another
machine of a different hardware architecture. This enables, for
instance, to do:
$ perf record -a --call-graph dwarf
on a x86-32 or aarch64 system and then do 'perf report' on it on a
x86_64 workstation (He Kuang)
- Allow reading from a backward ring buffer (one setup via
sys_perf_event_open() with perf_event_attr.write_backward = 1)
(Wang Nan)
- Finish merging initial SDT (Statically Defined Traces) support, see
cset comments for details about how it all works (Masami Hiramatsu)
- Support attaching eBPF programs to tracepoints (Wang Nan)
- Add demangling of symbols in programs written in the Rust language
(David Tolnay)
- Add support for tracepoints in the python binding, including an
example, that sets up and parses sched:sched_switch events,
tools/perf/python/tracepoint.py (Jiri Olsa)
- Introduce --stdio-color to set up the color output mode selection
in 'annotate' and 'report', allowing emit color escape sequences
when redirecting the output of these tools (Arnaldo Carvalho de
Melo)
- Add 'callindent' option to 'perf script -F', to indent the Intel PT
call stack, making this output more ftrace-like (Adrian Hunter,
Andi Kleen)
- Allow dumping the object files generated by llvm when processing
eBPF scriptlet events (Wang Nan)
- Add stackcollapse.py script to help generating flame graphs (Paolo
Bonzini)
- Add --ldlat option to 'perf mem' to specify load latency for loads
event (e.g. cpu/mem-loads/ ) (Jiri Olsa)
- Tooling support for Intel TopDown counters, recently added to the
kernel (Andi Kleen)"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (303 commits)
perf tests: Add is_printable_array test
perf tools: Make is_printable_array global
perf script python: Fix string vs byte array resolving
perf probe: Warn unmatched function filter correctly
perf cpu_map: Add more helpers
perf stat: Balance opening and reading events
tools: Copy linux/{hash,poison}.h and check for drift
perf tools: Remove include/linux/list.h from perf's MANIFEST
tools: Copy the bitops files accessed from the kernel and check for drift
Remove: kernel unistd*h files from perf's MANIFEST, not used
perf tools: Remove tools/perf/util/include/linux/const.h
perf tools: Remove tools/perf/util/include/asm/byteorder.h
perf tools: Add missing linux/compiler.h include to perf-sys.h
perf jit: Remove some no-op error handling
perf jit: Add missing curly braces
objtool: Initialize variable to silence old compiler
objtool: Add -I$(srctree)/tools/arch/$(ARCH)/include/uapi
perf record: Add --tail-synthesize option
perf session: Don't warn about out of order event if write_backward is used
perf tools: Enable overwrite settings
...
Olof's build test setup keeps failing to compile arm64 kernels
because of a toolchain that uses outdated kernel headers:
/work/build/batch/samples/seccomp/bpf-fancy.c:13:27: fatal error: linux/seccomp.h: No such file or directory
This is of course something he could change, but it also indicates
that others may run into the same problem. Running 'make headers_install'
avoids the issue by ensuring that the kernel headers are put into
the $(objdir)/usr/include path before we build the samples.
The same problem happened for the Documentation build in the
past and was fixed up with commit 8e2faea877 ("Make Documenation
depend on headers_install"). This adds an identical Makefile dependency
for the samples/ subdirectory.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
When $(LINUXINCLUDE) is added to the cflags of a target that
normall doesn't have it (e.g. HOSTCFLAGS), each entry in the
list is expanded so that we search both $(objtree) and $(srctree),
which is a bit silly, as we already know which of the two we
want for each entry in LINUXINCLUDE.
Also, a follow-up patch changes the behavior so we only look in
$(srctree) for manually added include path, and that breaks finding
the generated headers.
This adds an explicit $(objtree) for each tree that we want to
look for generated files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
arch/$(hdr-arch)/include/generated/uapi is included twice in the
header search path, which is unnecessary, so this changes the
top-level Makefile to drop the second instance by filtering out
everything from USERINCLUDE that was already part of LINUXINCLUDE.
This should have very little effect other than making the 'make V=1'
output slightly smaller and making the build time faster by a miniscule
amount, but it seems to be cleaner.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
This was broken when updating the documentation targets for the Sphinx
build, and moving from %docs target pattern to explicitly listed
targets.
Cc: Markus Heiser <markus.heiser@darmarit.de>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fixes: 22cba31bae ("Documentation/sphinx: add basic working Sphinx configuration and build")
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Pull kbuild regression fix from Michal Marek:
"The problem is that commit 9c8fa9bc08 ("kbuild: fix if_change and
friends to consider argument order") fixed a potential missed rebuild,
but this results in unnnecessary rebuilds with the packaging targets.
Which is still more correct than the previous logic, but also very
annoying"
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Initialize exported variables
While there's slight overlap with the DocBook help now, this can stay
intact when the DocBook help goes away.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
On openSUSE, the libelf development files are in package libelf-devel.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michal Marek <mmarek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kbuild@vger.kernel.org
Link: http://lkml.kernel.org/n/tip-s8nyk3pyy2927sd7qp7u42oi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The NOSTDINC_FLAGS variable is exported, so it needs to be cleared to
avoid duplicating its content when running make from within make (e.g.
in the packaging targets). This became an issue after commit
9c8fa9bc08 ("kbuild: fix if_change and friends to consider argument
order"), which no longer ignores the duplicate options. As Paulo Zanoni
points out, the LDFLAGS_vmlinux variable has the same problem.
Reported-by: "Zanoni, Paulo R" <paulo.r.zanoni@intel.com>
Fixes: 9c8fa9bc08 ("kbuild: fix if_change and friends to consider argument order")
Signed-off-by: Michal Marek <mmarek@suse.com>
The sancov gcc plugin inserts a __sanitizer_cov_trace_pc() call
at the start of basic blocks.
This plugin is a helper plugin for the kcov feature. It supports
all gcc versions with plugin support (from gcc-4.5 on).
It is based on the gcc commit "Add fuzzing coverage support" by Dmitry Vyukov
(https://gcc.gnu.org/viewcvs/gcc?limit_changes=0&view=revision&revision=231296).
Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
This patch allows to build the whole kernel with GCC plugins. It was ported from
grsecurity/PaX. The infrastructure supports building out-of-tree modules and
building in a separate directory. Cross-compilation is supported too.
Currently the x86, arm, arm64 and uml architectures enable plugins.
The directory of the gcc plugins is scripts/gcc-plugins. You can use a file or a directory
there. The plugins compile with these options:
* -fno-rtti: gcc is compiled with this option so the plugins must use it too
* -fno-exceptions: this is inherited from gcc too
* -fasynchronous-unwind-tables: this is inherited from gcc too
* -ggdb: it is useful for debugging a plugin (better backtrace on internal
errors)
* -Wno-narrowing: to suppress warnings from gcc headers (ipa-utils.h)
* -Wno-unused-variable: to suppress warnings from gcc headers (gcc_version
variable, plugin-version.h)
The infrastructure introduces a new Makefile target called gcc-plugins. It
supports all gcc versions from 4.5 to 6.0. The scripts/gcc-plugin.sh script
chooses the proper host compiler (gcc-4.7 can be built by either gcc or g++).
This script also checks the availability of the included headers in
scripts/gcc-plugins/gcc-common.h.
The gcc-common.h header contains frequently included headers for GCC plugins
and it has a compatibility layer for the supported gcc versions.
The gcc-generate-*-pass.h headers automatically generate the registration
structures for GIMPLE, SIMPLE_IPA, IPA and RTL passes.
Note that 'make clean' keeps the *.so files (only the distclean or mrproper
targets clean all) because they are needed for out-of-tree modules.
Based on work created by the PaX Team.
Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Pull kbuild updates from Michal Marek:
- new option CONFIG_TRIM_UNUSED_KSYMS which does a two-pass build and
unexports symbols which are not used in the current config [Nicolas
Pitre]
- several kbuild rule cleanups [Masahiro Yamada]
- warning option adjustments for gcov etc [Arnd Bergmann]
- a few more small fixes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (31 commits)
kbuild: move -Wunused-const-variable to W=1 warning level
kbuild: fix if_change and friends to consider argument order
kbuild: fix adjust_autoksyms.sh for modules that need only one symbol
kbuild: fix ksym_dep_filter when multiple EXPORT_SYMBOL() on the same line
gcov: disable -Wmaybe-uninitialized warning
gcov: disable tree-loop-im to reduce stack usage
gcov: disable for COMPILE_TEST
Kbuild: disable 'maybe-uninitialized' warning for CONFIG_PROFILE_ALL_BRANCHES
Kbuild: change CC_OPTIMIZE_FOR_SIZE definition
kbuild: forbid kernel directory to contain spaces and colons
kbuild: adjust ksym_dep_filter for some cmd_* renames
kbuild: Fix dependencies for final vmlinux link
kbuild: better abstract vmlinux sequential prerequisites
kbuild: fix call to adjust_autoksyms.sh when output directory specified
kbuild: Get rid of KBUILD_STR
kbuild: rename cmd_as_s_S to cmd_cpp_s_S
kbuild: rename cmd_cc_i_c to cmd_cpp_i_c
kbuild: drop redundant "PHONY += FORCE"
kbuild: delete unnecessary "@:"
kbuild: mark help target as PHONY
...
gcc-6 started warning by default about variables that are not
used anywhere and that are marked 'const', generating many
false positives in an allmodconfig build, e.g.:
arch/arm/mach-davinci/board-da830-evm.c:282:20: warning: 'da830_evm_emif25_pins' defined but not used [-Wunused-const-variable=]
arch/arm/plat-omap/dmtimer.c:958:34: warning: 'omap_timer_match' defined but not used [-Wunused-const-variable=]
drivers/bluetooth/hci_bcm.c:625:39: warning: 'acpi_bcm_default_gpios' defined but not used [-Wunused-const-variable=]
drivers/char/hw_random/omap-rng.c:92:18: warning: 'reg_map_omap4' defined but not used [-Wunused-const-variable=]
drivers/devfreq/exynos/exynos5_bus.c:381:32: warning: 'exynos5_busfreq_int_pm' defined but not used [-Wunused-const-variable=]
drivers/dma/mv_xor.c:1139:34: warning: 'mv_xor_dt_ids' defined but not used [-Wunused-const-variable=]
This is similar to the existing -Wunused-but-set-variable warning
that was added in an earlier release and that we disable by default
now and only enable when W=1 is set, so it makes sense to do
the same here. Once we have eliminated the majority of the
warnings for both, we can put them back into the default list.
We probably want this in backport kernels as well, to allow building
them with gcc-6 without introducing extra warnings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Lee Jones <lee.jones@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Michal Marek <mmarek@suse.com>
When gcov profiling is enabled, we see a lot of spurious warnings about
possibly uninitialized variables being used:
arch/arm/mm/dma-mapping.c: In function 'arm_coherent_iommu_map_page':
arch/arm/mm/dma-mapping.c:1085:16: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/clk/st/clk-flexgen.c: In function 'st_of_flexgen_setup':
drivers/clk/st/clk-flexgen.c:323:9: warning: 'num_parents' may be used uninitialized in this function [-Wmaybe-uninitialized]
kernel/cgroup.c: In function 'cgroup_mount':
kernel/cgroup.c:2119:11: warning: 'root' may be used uninitialized in this function [-Wmaybe-uninitialized]
All of these are false positives, so it seems better to just disable
the warnings whenever GCOV is enabled. Most users don't enable GCOV,
and based on a prior patch, it is now also disabled for 'allmodconfig'
builds, so there should be no downsides of doing this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Enabling CONFIG_GCOV_PROFILE_ALL produces us a lot of warnings like
lib/lz4/lz4hc_compress.c: In function 'lz4_compresshcctx':
lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1504 bytes is larger than 1024 bytes [-Wframe-larger-than=]
After some investigation, I found that this behavior started with gcc-4.9,
and opened https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69702.
A suggested workaround for it is to use the -fno-tree-loop-im
flag that turns off one of the optimization stages in gcc, so the
code runs a little slower but does not use excessive amounts
of stack.
We could make this conditional on the gcc version, but I could not
find an easy way to do this in Kbuild and the benefit would be
fairly small, given that most of the gcc version in production are
affected now.
I'm marking this for 'stable' backports because it addresses a bug
with code generation in gcc that exists in all kernel versions
with the affected gcc releases.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Michal Marek <mmarek@suse.com>
CONFIG_PROFILE_ALL_BRANCHES confuses gcc-5.x to the degree that it prints
incorrect warnings about a lot of variables that it thinks can be used
uninitialized, e.g.:
i2c/busses/i2c-diolan-u2c.c: In function 'diolan_usb_xfer':
i2c/busses/i2c-diolan-u2c.c:391:16: warning: 'byte' may be used uninitialized in this function
iio/gyro/itg3200_core.c: In function 'itg3200_probe':
iio/gyro/itg3200_core.c:213:6: warning: 'val' may be used uninitialized in this function
leds/leds-lp55xx-common.c: In function 'lp55xx_update_bits':
leds/leds-lp55xx-common.c:350:6: warning: 'tmp' may be used uninitialized in this function
misc/bmp085.c: In function 'show_pressure':
misc/bmp085.c:363:10: warning: 'pressure' may be used uninitialized in this function
power/ds2782_battery.c: In function 'ds2786_get_capacity':
power/ds2782_battery.c:214:17: warning: 'raw' may be used uninitialized in this function
These are all false positives that either rob someone's time when trying
to figure out whether they are real, or they get people to send wrong
patches to shut up the warnings.
Nobody normally wants to run a CONFIG_PROFILE_ALL_BRANCHES kernel in
production, so disabling the whole class of warnings for this configuration
has no serious downsides either.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Steven Rostedt <rostedtgoodmis.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
When the kernel path contains a space or a colon somewhere in the path
name, the modules_install target doesn't work anymore, as the path names
are not enclosed in double quotes. It is also supposed that and O= build
will suffer from the same weakness as modules_install.
Instead of checking and improving kbuild to resist to directories
including these characters, error out early to prevent any build if the
kernel's main directory contains a space.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.com>
The if_changed directive is useless against phony targets.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 2441e78b19 ("kbuild: better abstract vmlinux sequential prerequisites")
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When CONFIG_TRIM_UNUSED_KSYMS=y and CONFIG_BUILD_DOCSRC=y it is possible
to get the following error:
ERROR: "cn_del_callback" [Documentation/connector/cn_test.ko] undefined!
ERROR: "cn_add_callback" [Documentation/connector/cn_test.ko] undefined!
ERROR: "cn_netlink_send" [Documentation/connector/cn_test.ko] undefined!
../scripts/Makefile.modpost:91: recipe for target '__modpost' failed
It is not sufficient to do "vmlinux-dirs += Documentation" as this also
depends on the headers_check target, and all of this needs to be done
before adjust_autoksyms.sh is executed.
Let's sort this out by gathering those sequential prerequisites in a make
target of their own, separate from the vmlinux target. And by doing so,
the special autoksyms_recursive target is no longer needed.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
When a different output directory is specified during the build process (with
O= or KBUILD_OUTPUT), the call to adjust_autoksyms.sh script fails with the
following error:
/bin/sh scripts/adjust_autoksyms.sh \
"make KBUILD_MODULES=1 -f ../Makefile autoksyms_recursive"
/bin/sh: scripts/adjust_autoksyms.sh: No such file or directory
make[2]: *** [vmlinux] Error 127
make[1]: *** [sub-make] Error 2
make: *** [__sub-make] Error 2
Using the absolute path with $(srctree) variable solves the problem.
This is in case the CONFIG_TRIM_UNUSED_KSYMS option is specified.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Fixes: 23121ca2b5 ("kbuild: create/adjust generated/autoksyms.h")
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Michal Marek <mmarek@suse.com>
Pull objtool fixes from Ingo Molnar:
"A handful of objtool fixes: two improvements to how warnings are
printed plus a false positive warning fix, and build environment fix"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix Makefile to properly see if libelf is supported
objtool: Detect falling through to the next function
objtool: Add workaround for GCC switch jump table bug
When doing a make allmodconfig, I hit the following compile error:
In file included from builtin-check.c:32:0:
elf.h:22:18: fatal error: gelf.h: No such file or directory
compilation terminated.
...
Digging into it, it appears that the $(shell ..) command in the Makefile does
not give the proper result when it fails to find -lelf, and continues to
compile objtool.
Instead, use the "try-run" makefile macro to perform the test. This gives a
proper result for both cases.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Fixes: 442f04c34a ("objtool: Add tool to perform compile-time stack metadata validation")
Link: http://lkml.kernel.org/r/20160420153234.GA24032@home.goodmis.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Obviously, the "help" should be a PHONY target.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
As in other places, PHONY is a better fit for "modules" and
"modules_install".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
These targets are marked as PHONY. No need to add FORCE to their
dependency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Make sample modules in parallel with the rest of the kernel rather
than having them built from the vmlinux target. This makes the build
slightly faster, and those modules are properly considered when
adjust_autoksyms.sh is executed.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Given the list of exported symbols needed by all modules, we can create
a header file containing preprocessor defines for each of those symbols.
Also, when some symbols are added and/or removed from the list, we can
update the time on the corresponding files used as build dependencies for
those symbols. And finally, if any symbol did change state, the
corresponding source files must be rebuilt.
The insertion or removal of an EXPORT_SYMBOL() entry within a module may
create or remove the need for another exported symbol. This is why this
operation has to be repeated until the list of needed exported symbols
becomes stable. Only then the final kernel and modules link take place.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Similar to include/generated/autoconf.h, include/generated/autoksyms.h
will contain a list of defines for each EXPORT_SYMBOL() that we want
active. The format is:
#define __KSYM_<symbol_name> 1
This list will be auto-generated with another patch. For now we only
include the preprocessor magic to automatically create or omit the
corresponding struct kernel_symbol declaration.
Given the content of include/generated/autoksyms.h may not be known in
advance, an empty file is created early on to let the build proceed.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
