While most of the functionality on Nvidia GPUs doesn't require using an
explicit handle instead of the main VRAM handle + offset, there are a
couple of places that do require explicit handles, such as CRC
functionality. Since this means we're about to add another
nouveau-chosen handle, let's just go ahead and move any hard-coded
handles into a single header. This is just to keep things slightly
organized, and to make it a little bit easier if we need to add more
handles in the future.
This patch should contain no functional changes.
Changes since v3:
* Correct SPDX license identifier (checkpatch)
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-9-lyude@redhat.com
Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Store ttm bo->offset in struct nouveau_bo instead.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372932/
Signed-off-by: Christian König <christian.koenig@amd.com>
The most innocuous result of not having done this is that we end up
sending unnecessary methods when we next enable the window.
However, interactions with the code handling skipping disables when
an update immediately follows, and window ownership assignment, can
lead to upsetting the display hardware on Volta and newer.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Allow setting the block layout of a nouveau FB
object using DRM format modifiers. When
specified, the format modifier block layout and
kind overrides the GEM buffer's implicit layout
and kind. The specified format modifier is
validated against the list of modifiers supported
by the target display hardware.
v2: Used Tesla family instead of NV50 chipset compare
v4: Do not cache kind, tile_mode in nouveau_framebuffer
v5: Resolved against nouveau_framebuffer cleanup
Signed-off-by: James Jones <jajones@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Advertise support for the full list of format
modifiers supported by each class of NVIDIA
desktop GPU display hardware. Stash the array
of modifiers in the nouveau_display struct for
use when validating userspace framebuffer
creation requests, which will be supportd in
a subsequent change.
Signed-off-by: James Jones <jajones@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
After its cleanup, struct nouveau_framebuffer is only a wrapper around
struct drm_framebuffer. Use the latter directly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The buffer object stored in nvbo is also available GEM object in obj[0]
of struct drm_framebuffer. Therefore remove nvbo in favor obj[0] and
replace all references accordingly. This may require an additional cast.
With this change we can already replace nouveau_user_framebuffer_destroy()
and nouveau_user_framebuffer_create_handle() with generic GEM helpers.
Calls to nouveau_framebuffer_new() receive a GEM object.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
While certain modeset operations on gv100+ need us to temporarily
disable the LUT, we make the mistake of sometimes neglecting to
reprogram the LUT after such modesets. In particular, moving a head from
one encoder to another seems to trigger this quite often. GV100+ is very
picky about having a LUT in most scenarios, so this causes the display
engine to hang with the following error code:
disp: chid 1 stat 00005080 reason 5 [INVALID_STATE] mthd 0200 data
00000001 code 0000002d)
So, fix this by always re-programming the LUT if we're clearing it in a
state where the wndw is still visible, and has a XLUT handle programmed.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: facaed62b4 ("drm/nouveau/kms/gv100: initial support")
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The hardware supports either size. Also add checks to ensure that only
these two sizes may be used for supplying a LUT.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
It's the only flag anyone actually cares about. Plus if we're unlucky,
the atomic ioctl might need a different flag for async flips. So
better to abstract this away from the uapi a bit.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: David Francis <David.Francis@amd.com>
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903190642.32588-3-daniel.vetter@ffwll.ch
Has a nice side-effect that we only update HW for this when it changes now,
rather than every time we do a page flip.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We have some of this open-coded already, use the helper to prevent problems
when adding (for example) support for the alpha property.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Older hardware seems to want 0..1024 values, while new hardware takes
0..1 values. We set the gain to 1024 for the earlier display classes.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
On Turing, an input LUT is required to transform inputs in fixed-point
formats to FP16 for the internal display pipe. We provide an identity
mapping whenever a window is enabled for this reason.
HW has error checks to ensure when the input is already FP16, that the
input LUT is also disabled.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Drop the deprecated drmP.h header from nouveau_drv.h.
Fix fallout in other parts of the driver.
Build tested using allmodconfig and allyesconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Be more consistent with the naming of the other DMA-buf objects.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/323401/
Cursor position updates were accidentally causing us to attempt to interlock
window with window immediate, and without a matching window immediate update,
NVDisplay could hang forever in some circumstances.
Fixes suspend/resume on (at least) Quadro RTX4000 (TU104).
Reported-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ctxdmas for cursors from all heads are setup in the core channel, and due
to us tracking allocated handles per-window, we were failing with -EEXIST
on multiple-head setups trying to allocate duplicate handles.
The cursor code is hardcoded to use the core channel vram ctxdma already,
so just skip ctxdma allocation for cursor fbs to fix the issue.
Fixes: 5bca1621c0 ("drm/nouveau/kms/nv50-: move fb ctxdma tracking into windows")
Reported-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When only the position of a window changes, there's no need to submit
an image update as well.
Will be required to support the overlays, and Volta windows.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Window visibility is going to become a little more complicated with the
upcoming LUT changes, so store the calculated value to avoid needing to
recalculate the armed state again.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Instead of windows returning their core channel interlock mask if they
know core has been modified, it's recorded unconditionally and used if
required when update methods are emitted.
This will be required to support Volta.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
