[ Upstream commit 8e4d86e241cf035d6d3467cd346e7ce490681937 ]
The "a->index" value comes from the user via the ioctl. The problem is
that the shift can wrap resulting in setting "mxb->cur_audinput" to an
invalid value, which later results in an array overflow.
Fixes: 6680427791 ("[media] mxb: fix audio handling")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb08c48132a1f594478ab9fa2b6ee646c3513a49 ]
If of_graph_get_endpoint_by_regs() return NULL, it will return 0 rather
than an errno, because we doesn't initialize the return value.
Fixes: 0556f1d580 ("media: tvp5150: add input source selection of_graph support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ed36ecd1459b653cced8929bfb37dba94b64c5d ]
To comply with the intended usage of the V4L2 selection target when
used to retrieve a sensor image properties, adjust the rectangles
returned by the imx219 driver.
The top/left crop coordinates of the TGT_CROP rectangle were set to
(0, 0) instead of (8, 8) which is the offset from the larger physical
pixel array rectangle. This was also a mismatch with the default values
crop rectangle value, so this is corrected. Found with v4l2-compliance.
While at it, add V4L2_SEL_TGT_CROP_BOUNDS support: CROP_DEFAULT and
CROP_BOUNDS have the same size as the non-active pixels are not readable
using the selection API. Found with v4l2-compliance.
[reword commit message, use macros for pixel offsets]
Fixes: e6d4ef7d58 ("media: i2c: imx219: Implement get_selection")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fe1d4453fb6bf103d668a19d957a7b2fc21887c ]
The MAX9271 GPIO1 line that controls the sensor reset is by default
enabled after a serializer chip reset.
As rdacm20 does not go through an explicit serializer reset, make sure
GPIO1 is enabled to make the camera module driver more robust.
Fixes: 34009bffc1 ("media: i2c: Add RDACM20 driver")
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 909a0a189c677307edd461e21fd962784370d27f ]
Fix GPIO enable/disable operations which wrongly read the 0x0f register
to obtain the current mask of the enabled lines instead of using
the correct 0x0e register.
Also fix access to bit 0 of the register which is marked as reserved.
Fixes: 34009bffc1 ("media: i2c: Add RDACM20 driver")
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b1b0cb0636166187478ef68d5b95f5caea062ec ]
This is supposed to return negative error codes but the type is bool so
it returns true instead.
Fixes: b47b79d8a2 ("[media] media: i2c: max2175: Add MAX2175 support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eeb76afbe8d91e112396c6281cd020725160f006 ]
Stop video streaming when requested.
When s_stream is called to stop the video streaming, if/else condition calls
start_streaming function instead of the one for stopping it.
Fixes: 4361905962 ("media: imx214: Add imx214 camera sensor driver")
Signed-off-by: Daniel Gomez <daniel@qtec.com>
Signed-off-by: Ricardo Ribalda <ribalda@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abf287eeff4c6da6aa804bbd429dfd9d0dfb6ea7 ]
When dvb_create_media_graph fails, the debugfs kept inside client should
be released. However, the current implementation does not release them.
Fix this by adding a new goto label to call smsdvb_debugfs_release.
Fixes: 0d3ab8410d ("[media] dvb core: must check dvb_create_media_graph()")
Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcdff74fa6bc00c32079d0bebd620764c26f2d89 ]
Fix to goto snd_error in error handling case when fails
to do snd_ctl_add, as done elsewhere in this function.
Fixes: 28cae868cd ("[media] solo6x10: move out of staging into drivers/media/pci.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eff5ce02e170125936c43ca96c7dc701a86681ed ]
As per current implementation, video driver is unvoting "videom-mem" path
for last video session during vdec_session_release().
While video playback when we try to suspend device, we see video clock
warnings since votes are already removed during vdec_session_release().
corrected this by putting dummy vote on "video-mem" after last video
session release and unvoting it during suspend.
suspend")
Fixes: 07f8f22a33 ("media: venus: core: remove CNOC voting while device
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e44fb034b03231cd117d6db73fb8048deab6ea41 ]
As per bandwidth table video driver is voting with average bandwidth
for "video-mem" and "cpu-cfg" paths as peak bandwidth is zero
in bandwidth table.
suspend")
Fixes: 07f8f22a33 ("media: venus: core: remove CNOC voting while device
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e8efdb5787986cc0d0134925cf5c4f001bb3f2e ]
Currently video driver is voting for venus0-ebi path during buffer
processing with an average bandwidth of all the instances and
unvoting during session release.
While video streaming when we try to do XO-SD using the command
"echo mem > /sys/power/state command" , device is not entering
to suspend state and from interconnect summary seeing votes for venus0-ebi
Corrected this by voting for venus0-ebi path in venus_runtime_resume()
and unvote during venus_runtime_suspend().
suspend")
Fixes: 07f8f22a33 ("media: venus: core: remove CNOC voting while device
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21926d466e3a4f35c2536244d1d56512cc81a0a9 ]
Currently video driver is voting after clk enable and un voting
before clk disable. This is incorrect, video driver should vote
before clk enable and unvote after clk disable.
Corrected this by changing the order of clk enable and clk disable.
suspend")
Fixes: 07f8f22a33 ("media: venus: core: remove CNOC voting while device
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69baf338fc16a4d55c78da8874ce3f06feb38c78 ]
Return -EINVAL if invalid bus-type is detected while parsing endpoints.
Fixes: 26c1126c9b ("media: v4l: fwnode: Use media bus type for bus parser selection")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27c3943683f74e35e1d390ceb2e3639eff616ad6 ]
mtk_vcodec_release_dec_pm() will be called in two places:
a. mtk_vcodec_init_dec_pm() succeed while mtk_vcodec_probe() return error.
b. mtk_vcodec_dec_remove().
In both cases put_device() call is needed, since of_find_device_by_node()
was called in mtk_vcodec_init_dec_pm() previously.
Thus add put_devices() call in mtk_vcodec_release_dec_pm()
Fixes: 590577a4e5 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Decoder Driver")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f28a81a3b64270da3588174feff4628c36e0ff4e ]
if of_find_device_by_node() succeeds, mtk_jpeg_clk_init() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: 648372a87c ("media: platform: Change the call functions of getting/enable/disable the jpeg's clock")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a08ad6339e0441ca12533969ed94a87e3655426e ]
The are two instances of sizeof() being used incorrectly. The
sizeof(void *) is incorrect because urb_buffer is a char ** pointer,
fix this by using sizeof(*dev->urb_buffer). The sizeof(dma_addr_t *)
is incorrect, it should be sizeof(*dev->urb_dma), which is a dma_addr_t
and not a dma_addr_t *. This errors did not cause any issues because
it just so happens the sizes are the same.
Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)")
Fixes: 16427faf28 ("[media] tm6000: Add parameter to keep urb bufs allocated")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9c60cc797cf72e95bb39f32316e9f0e5f85435f9 upstream.
SPI bus number must be assigned dynamically for each device, otherwise it
will crash when multiple devices are plugged to system.
Reported-and-tested-by: syzbot+c60ddb60b685777d9d59@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As reported by sparse:
drivers/media/test-drivers/vidtv/vidtv_ts.h:47:47: warning: array of flexible structures
drivers/media/test-drivers/vidtv/vidtv_channel.c:458:54: warning: incorrect type in argument 3 (different base types)
drivers/media/test-drivers/vidtv/vidtv_channel.c:458:54: expected unsigned short [usertype] service_id
drivers/media/test-drivers/vidtv/vidtv_channel.c:458:54: got restricted __be16 [usertype] service_id
drivers/media/test-drivers/vidtv/vidtv_s302m.c:471 vidtv_s302m_encoder_init() warn: possible memory leak of 'e'
Address such warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some functions has a different name between their prototypes
and the corresponding kernel-doc markups.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently the call to vidtv_psi_pat_table_destroy frees the object
m->si.pat however m->si.pat->num_pmt is being accessed after the
free. Fix this by destroying m->si.pat after the m->si.pmt_secs[]
objects have been freed.
Addresses-Coverity: ("Read from pointer after free")
Reported-by: Cengiz Can <cengiz@kernel.wtf> # sent a similar fix about the same time
Fixes: 039b7caed1 ("media: vidtv: add a PID entry for the NIT table")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
We need to set ->need_cache_sync_on_prepare and
->need_cache_sync_on_finish when we initialize vb2 buffer.
Currently these flags are set/adjusted only in V4L2's
vb2_queue_or_prepare_buf(), which means that for the code
paths that don't use V4L2 vb2 will always tell videobuf2
core to skip ->prepare() and ->finish() cache syncs/flushes.
Fix this by setting cache sync hints for new buffers; except
VB2_MEMORY_DMABUF buffers, for which DMA exporter syncs
caches.
Fixes: f5f5fa73fb ("media: videobuf2: handle V4L2 buffer cache flags")
Reported-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Starting with firmware version 10 the GET/SET_HDMI_VERSION message
was removed and GET/SET_AUTO_POWER_ON was added.
The removal of GET/SET_HDMI_VERSION caused the probe of the
Pulse-Eight to fail. Add a version check to handle this gracefully.
Also show (but do not set) the Auto Power On value.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Maxime Ripard <mripard@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit 601282d65b ("media: pulse8-cec: use adap_free callback") used
the adap_free callback to clean up on disconnect. What I forgot was that
in the probe it will call cec_delete_adapter() followed by kfree(pulse8)
if an error occurs. But by using the adap_free callback,
cec_delete_adapter() is already freeing the pulse8 struct.
This wasn't noticed since normally the probe works fine, but Pulse-Eight
published a new firmware version that caused a probe error, so now it
hits this bug. This affects firmware version 12, but probably any
version >= 10.
Commit aa9eda7612 ("media: pulse8-cec: close serio in disconnect, not
adap_free") made this worse by adding the line 'pulse8->serio = NULL'
right after the call to cec_unregister_adapter in the disconnect()
function. Unfortunately, cec_unregister_adapter will typically call
cec_delete_adapter (unless a filehandle to the cec device is still
open), which frees the pulse8 struct. So now it will also crash on a
simple unplug of the Pulse-Eight device.
With this fix both the unplug issue and a probe() error situation are
handled correctly again.
It will still fail to probe() with a v12 firmware, that's something
to look at separately.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Maxime Ripard <mripard@kernel.org>
Fixes: aa9eda7612 ("media: pulse8-cec: close serio in disconnect, not adap_free")
Fixes: 601282d65b ("media: pulse8-cec: use adap_free callback")
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Since commit 528222d853 ("media: rc: harmonize infrared durations to
microseconds"), the calculation of the chk period is wrong. As a result,
all reported IR will have incorrect timings.
Now that the calculations are done in microseconds rather than nanoseconds,
we can fold the calculations in a simpler form with less rounding error.
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Fixes: 528222d853 ("media: rc: harmonize infrared durations to microseconds")
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Avoid initializing the structs multiple times and pass the
PAT struct as a pointer, instead of a var.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Pass struct header_write_args as a pointer, instead of
passing as a var;
- Initialize the psi_args struct only once.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This function initializes the psi_args twice, and receives
a struct, instead of a pointer to a struct.
Clean it up.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cleanup the table_section_crc32_write_into() function
by initializing struct psi_write_args only once and by
passing the args as a pointer.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The function vidtv_psi_ts_psi_write_into() initializes the
ts_header fields several times, and receives a struct
as argument, instead of using a pointer to struct.
Cleanup the function, in order to reduce its stack usage
and to avoid initializing the ts_header multiple times.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The current event is using an undefined date. Instead, it
should be the timestamp when the EIT table was generated.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The service_id there should be equal to the one used
on other tables, otherwise, EIT entries won't be valid.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As the service currently broadcasts just audio, change the
service type to reflect that.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
On normal TS streams, the NIT table has its own entry at PAT,
but not at PMT.
While here, properly handle alloc problems when creating
PMT entries.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The EIT header ID field should not contain the network ID, but,
instead, the service_id of the program described at EIT.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As defined at ETSI TS 101 162, original network IDs up to 0xfebf
are reserved for registration at dvb.org.
Let's use, instead, an original network ID at the range
0xff00-0xffff, as this is for private temporary usage.
As the same value is also used for the network ID,
the range 0xff01-0xffff also fits better, as values
lower than that depend if the network is used for
satellite, terrestrial, cable of CI.
While here, move the TS ID to the bridge code, where it
is used, and change its value, as it was identical to
the value previously used by network ID. While we could
keep the same value, let's change it, just to make easier
to check for the new code while reading it with DVB tools
like dvbinspector.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Place some text at EIT data, and use ISO 8859-15 encoding for
the German letter "ü" (u mit umlat) letter.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Initialize the destination buffer/size and the initial
offset when creating the local var.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of first zeroing all fields at the mux structs and
then filling, do some initialization for the const data
when they're created.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Right now, there's no need to access the length of some
tables. So, drop the unused functions.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Do some cleanups at the coding style of the driver:
- remove "inline" declarations;
- use reverse xmas-tree for local var declarations;
- Adjust some indent to avoid breaking 80-cols;
- Cleanup some comments.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
