refill_rx() and start_tx() do not check if mapping dma memory succeed.
The patch adds the checks and failure handling.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull i2c fixes from Wolfram Sang:
"A set of 'usual' driver bugfixes for the I2C subsystem"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rcar: disable runtime PM correctly in slave mode
i2c: designware: Keep pm_runtime_enable/_disable calls in sync
i2c: designware: fix IO timeout issue for AMD controller
i2c: imx: init bus recovery info before adding i2c adapter
i2c: do not use 0x in front of %pa
i2c: davinci: Increase module clock frequency
i2c: mv64xxx: The n clockdiv factor is 0 based on sunxi SoCs
i2c: rk3x: populate correct variable for sda_falling_time
Since atomic check is called also for disabled crtcs it should skip
mode checking as it can be uninitialized. The patch fixes it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
When we also are I2C slave, we need to disable runtime PM because the
address detection mechanism needs to be active all the time. However, we
can reenable runtime PM once the slave instance was unregistered. So,
use pm_runtime_get_sync/put to achieve this, since it has proper
refcounting. pm_runtime_allow/forbid is like a global knob controllable
from userspace which is unsuitable here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
A cleanup patch I did was unfortunately wrong and introduced
multiple serious bugs in the netcp rx processing, as indicated
by these correct gcc warnings:
drivers/net/ethernet/ti/netcp_core.c:776:14: warning: 'buf_ptr' may be used uninitialized in this function [-Wuninitialized]
drivers/net/ethernet/ti/netcp_core.c:687:14: warning: 'ptr' may be used uninitialized in this function [-Wuninitialized]
I have checked the patch once more and found that a call to
get_pkt_info() accidentally got removed in netcp_free_rx_desc_chain,
and netcp_process_one_rx_packet no longer retrieved the correct
buffer length. This patch should fix all the known problems,
but I did not test on real hardware.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 8990777914 ("netcp: try to reduce type confusion in descriptors")
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix a potential regression in the generic power domains
framework introduced during the 4.3 development cycle that
may lead to spurious failures of system suspend in certain
situations (Ulf Hansson).
- Fix a problem in the power capping RAPL (Running Average
Power Limits) driver that causes it to initialize successfully
on some systems where it is not supposed to do that which is
due to an incorrect check in an initialization routine (Prarit
Bhargava).
- Fix a build problem in the cpufreq Tegra driver that depends
on the regulator framework, but that dependency is not reflected
in Kconfig (Arnd Bergmann).
- Fix a recent mistake in the intel_pstate driver where a numeric
constant is used directly instead of a symbol defined specifically
for the case in question (Prarit Bhargava).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=da89
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a potential regression introduced during the 4.3 cycle
(generic power domains framework), a nasty bug that has been present
forever (power capping RAPL driver), a build issue (Tegra cpufreq
driver) and a minor ugliness introduced recently (intel_pstate).
Specifics:
- Fix a potential regression in the generic power domains framework
introduced during the 4.3 development cycle that may lead to
spurious failures of system suspend in certain situations (Ulf
Hansson).
- Fix a problem in the power capping RAPL (Running Average Power
Limits) driver that causes it to initialize successfully on some
systems where it is not supposed to do that which is due to an
incorrect check in an initialization routine (Prarit Bhargava).
- Fix a build problem in the cpufreq Tegra driver that depends on the
regulator framework, but that dependency is not reflected in
Kconfig (Arnd Bergmann).
- Fix a recent mistake in the intel_pstate driver where a numeric
constant is used directly instead of a symbol defined specifically
for the case in question (Prarit Bhargava)"
* tag 'pm+acpi-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap / RAPL: fix BIOS lock check
cpufreq: intel_pstate: Minor cleanup for FRAC_BITS
cpufreq: tegra: add regulator dependency for T124
PM / Domains: Allow runtime PM callbacks to be re-used during system PM
The commit c6ff526829 ("rhashtable:
Fix walker list corruption") causes a suspicious RCU usage warning
because we no longer hold ht->mutex when we dereference ht->tbl.
However, this is a false positive because we now hold ht->lock
which also guarantees that ht->tbl won't disppear from under us.
This patch kills the warning by using rcu_dereference_protected.
Reported-by: kernel test robot <ying.huang@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Three fixes this time, two in SES picked up by KASAN for various types of
buffer overrun. The first is a USB array which returns page 8 whatever is
asked for and causes us to overrun with incorrect data format assumptions and
the second is an invalid iteration of page 10 (the additional information
page). The final one is a reversion of a NULL deref fix which caused
suspend/resume not to be called in pairs leading to incorrect device operation
(Jens has queued a more proper fix for the problem in block).
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJWdLxTAAoJEDeqqVYsXL0MwOYH+wYb27NxfyA7+q7z/dFz+LhQ
B9RlUfnEw57vVz7KEwleqJ9uA2jprCQndMqRoelmWtxeu5CVUBbq/1ONDWvPX2ha
Prr3wVp+SbqbtzmvGQrQ8If7o4iS47fXtwUe5RRDBdfKMUfXs7LeVBgQrpZsqlkE
va6LNKVqzYW4sneC+CfWcwwyedLGeaphNBYygKtCm7SfEkbnfH5+zhWH9JWwtYXf
r8VCCUnmF69ocx4a7MZLnSAJuXfzaJl45c0nhRiHTiokW7KYuylJm0Zd1PYkhwhV
rQr53otJsdPTyZUjmeCdS6PBlGp/HVdYIOyKt5b4Ti2S71ij9R52YPY6BdtIWeQ=
=6New
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three fixes this time, two in SES picked up by KASAN for various types
of buffer overrun. The first is a USB array which returns page 8
whatever is asked for and causes us to overrun with incorrect data
format assumptions and the second is an invalid iteration of page 10
(the additional information page).
The final fix is a reversion of a NULL deref fix which caused
suspend/resume not to be called in pairs leading to incorrect device
operation (Jens has queued a more proper fix for the problem in
block)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
ses: fix additional element traversal bug
Revert "SCSI: Fix NULL pointer dereference in runtime PM"
ses: Fix problems with simple enclosures
Just one important fix for amdgpu to avoid possible memory corruption.
* 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: fix user fence handling
This fixes CVE-2015-7550.
There's a race between keyctl_read() and keyctl_revoke(). If the revoke
happens between keyctl_read() checking the validity of a key and the key's
semaphore being taken, then the key type read method will see a revoked key.
This causes a problem for the user-defined key type because it assumes in
its read method that there will always be a payload in a non-revoked key
and doesn't check for a NULL pointer.
Fix this by making keyctl_read() check the validity of a key after taking
semaphore instead of before.
I think the bug was introduced with the original keyrings code.
This was discovered by a multithreaded test program generated by syzkaller
(http://github.com/google/syzkaller). Here's a cleaned up version:
#include <sys/types.h>
#include <keyutils.h>
#include <pthread.h>
void *thr0(void *arg)
{
key_serial_t key = (unsigned long)arg;
keyctl_revoke(key);
return 0;
}
void *thr1(void *arg)
{
key_serial_t key = (unsigned long)arg;
char buffer[16];
keyctl_read(key, buffer, 16);
return 0;
}
int main()
{
key_serial_t key = add_key("user", "%", "foo", 3, KEY_SPEC_USER_KEYRING);
pthread_t th[5];
pthread_create(&th[0], 0, thr0, (void *)(unsigned long)key);
pthread_create(&th[1], 0, thr1, (void *)(unsigned long)key);
pthread_create(&th[2], 0, thr0, (void *)(unsigned long)key);
pthread_create(&th[3], 0, thr1, (void *)(unsigned long)key);
pthread_join(th[0], 0);
pthread_join(th[1], 0);
pthread_join(th[2], 0);
pthread_join(th[3], 0);
return 0;
}
Build as:
cc -o keyctl-race keyctl-race.c -lkeyutils -lpthread
Run as:
while keyctl-race; do :; done
as it may need several iterations to crash the kernel. The crash can be
summarised as:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
IP: [<ffffffff81279b08>] user_read+0x56/0xa3
...
Call Trace:
[<ffffffff81276aa9>] keyctl_read_key+0xb6/0xd7
[<ffffffff81277815>] SyS_keyctl+0x83/0xe0
[<ffffffff815dbb97>] entry_SYSCALL_64_fastpath+0x12/0x6f
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Morris <james.l.morris@oracle.com>
Looks like we're missing the wakeirq for the console uart for
duovero parlor. Let's add that as without it console acess just
hangs with PM enabled.
Cc: Arun Bharadwaj <arun@gumstix.com>
Cc: Ash Charles <ash@gumstix.com>
Cc: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
When sending "SLEEP" command to the controller it ceases scanning
completely and is unable to wake the system up from sleep, so if it is
configured as a wakeup source we should simply configure interrupt for
wakeup and rely on idle logic within the controller to reduce power
consumption while it is not used.
Signed-off-by: James Chen <james.chen@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull btrfs fixes from Chris Mason:
"A couple of small fixes"
* 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: check prepare_uptodate_page() error code earlier
Btrfs: check for empty bitmap list in setup_cluster_bitmaps
btrfs: fix misleading warning when space cache failed to load
Btrfs: fix transaction handle leak in balance
Btrfs: fix unprotected list move from unused_bgs to deleted_bgs list
Merge misc fixes from Andrew Morton:
"Three patches"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
include/linux/mmdebug.h: should include linux/bug.h
mm/zswap: change incorrect strncmp use to strcmp
proc: fix -ESRCH error when writing to /proc/$pid/coredump_filter
mmdebug.h uses BUILD_BUG_ON_INVALID(), assuming someone else included
linux/bug.h. Include it ourselves.
This saves build-failures such as:
arch/arm64/include/asm/pgtable.h: In function 'set_pte_at':
arch/arm64/include/asm/pgtable.h:281:3: error: implicit declaration of function 'BUILD_BUG_ON_INVALID' [-Werror=implicit-function-declaration]
VM_WARN_ONCE(!pte_young(pte),
Fixes: 02602a18c3 ("bug: completely remove code generated by disabled VM_BUG_ON()")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change the use of strncmp in zswap_pool_find_get() to strcmp.
The use of strncmp is no longer correct, now that zswap_zpool_type is
not an array; sizeof() will return the size of a pointer, which isn't
the right length to compare. We don't need to use strncmp anyway,
because the existing params and the passed in params are all guaranteed
to be null terminated, so strcmp should be used.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Reported-by: Weijie Yang <weijie.yang@samsung.com>
Cc: Seth Jennings <sjennings@variantweb.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Writing to /proc/$pid/coredump_filter always returns -ESRCH because commit
774636e19e ("proc: convert to kstrto*()/kstrto*_from_user()") removed
the setting of ret after the get_proc_task call and incorrectly left it as
-ESRCH. Instead, return 0 when successful.
Example breakage:
echo 0 > /proc/self/coredump_filter
bash: echo: write error: No such process
Fixes: 774636e19e ("proc: convert to kstrto*()/kstrto*_from_user()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org> [4.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In a set action tunnel attributes should be encoded in a
nested action.
I noticed this because ovs-dpctl was reporting an error
when dumping flows due to the incorrect encoding of tunnel attributes
in a set action.
Fixes: fc4099f172 ("openvswitch: Fix egress tunnel info.")
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
FW has a rare corner case in which a fragmented packet using lots
of frags would not be linearized, causing the FW to assert while trying
to transmit the packet.
To prevent this, we need to make sure the window of fragements containing
MSS worth of data contains 1 BD less than for regular packets due to
the additional parsing BD.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since it is possible for an external system to send oversize packets
at anytime, it is best for driver not to print a message and spam
the log (potential external DoS).
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=109471
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
IP-TTL case is already handled in ip_tunnel_ioctl() API.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding support for SYN_RECV request sockets to tcp_abort()
is quite easy after our tcp listener rewrite.
Note that we also need to better handle listeners, or we might
leak not yet accepted children, because of a missing
inet_csk_listen_stop() call.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Tested-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
Misc BPF updates
This series contains a couple of misc updates to the BPF code, besides
others a new helper bpf_skb_load_bytes(), moving clearing of A/X to the
classic converter, etc. Please see individual patches for details.
Thanks!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add couple of test cases for interpreter but also JITs, f.e. to test that
when imm32 moves are being done, upper 32bits of the regs are being zero
extended.
Without JIT:
[...]
[ 1114.129301] test_bpf: #43 MOV REG64 jited:0 128 PASS
[ 1114.130626] test_bpf: #44 MOV REG32 jited:0 139 PASS
[ 1114.132055] test_bpf: #45 LD IMM64 jited:0 124 PASS
[...]
With JIT (generated code can as usual be nicely verified with the help of
bpf_jit_disasm tool):
[...]
[ 1062.726782] test_bpf: #43 MOV REG64 jited:1 6 PASS
[ 1062.726890] test_bpf: #44 MOV REG32 jited:1 6 PASS
[ 1062.726993] test_bpf: #45 LD IMM64 jited:1 6 PASS
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When sometimes structs or variables need to be initialized/'memset' to 0 in
an eBPF C program, the x86 BPF JIT converts this to use immediates. We can
however save a couple of bytes (f.e. even up to 7 bytes on a single emmission
of BPF_LD | BPF_IMM | BPF_DW) in the image by detecting such case and use xor
on the dst register instead.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Comment says "User BPF's register A is mapped to our BPF register 6",
which is actually wrong as the mapping is on register 0. This can
already be inferred from the code itself. So just remove it before
someone makes assumptions based on that. Only code tells truth. ;)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Back in the days where eBPF (or back then "internal BPF" ;->) was not
exposed to user space, and only the classic BPF programs internally
translated into eBPF programs, we missed the fact that for classic BPF
A and X needed to be cleared. It was fixed back then via 83d5b7ef99
("net: filter: initialize A and X registers"), and thus classic BPF
specifics were added to the eBPF interpreter core to work around it.
This added some confusion for JIT developers later on that take the
eBPF interpreter code as an example for deriving their JIT. F.e. in
f75298f5c3 ("s390/bpf: clear correct BPF accumulator register"), at
least X could leak stack memory. Furthermore, since this is only needed
for classic BPF translations and not for eBPF (verifier takes care
that read access to regs cannot be done uninitialized), more complexity
is added to JITs as they need to determine whether they deal with
migrations or native eBPF where they can just omit clearing A/X in
their prologue and thus reduce image size a bit, see f.e. cde66c2d88
("s390/bpf: Only clear A and X for converted BPF programs"). In other
cases (x86, arm64), A and X is being cleared in the prologue also for
eBPF case, which is unnecessary.
Lets move this into the BPF migration in bpf_convert_filter() where it
actually belongs as long as the number of eBPF JITs are still few. It
can thus be done generically; allowing us to remove the quirk from
__bpf_prog_run() and to slightly reduce JIT image size in case of eBPF,
while reducing code duplication on this matter in current(/future) eBPF
JITs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Tested-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Zi Shen Lim <zlim.lnx@gmail.com>
Cc: Yang Shi <yang.shi@linaro.org>
Acked-by: Yang Shi <yang.shi@linaro.org>
Acked-by: Zi Shen Lim <zlim.lnx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When hacking tc programs with eBPF, one of the issues that come up
from time to time is to load addresses from headers. In eBPF as in
classic BPF, we have BPF_LD | BPF_ABS | BPF_{B,H,W} instructions that
extract a byte, half-word or word out of the skb data though helpers
such as bpf_load_pointer() (interpreter case).
F.e. extracting a whole IPv6 address could possibly look like ...
union v6addr {
struct {
__u32 p1;
__u32 p2;
__u32 p3;
__u32 p4;
};
__u8 addr[16];
};
[...]
a.p1 = htonl(load_word(skb, off));
a.p2 = htonl(load_word(skb, off + 4));
a.p3 = htonl(load_word(skb, off + 8));
a.p4 = htonl(load_word(skb, off + 12));
[...]
/* access to a.addr[...] */
This work adds a complementary helper bpf_skb_load_bytes() (we also
have bpf_skb_store_bytes()) as an alternative where the same call
would look like from an eBPF program:
ret = bpf_skb_load_bytes(skb, off, addr, sizeof(addr));
Same verifier restrictions apply as in ffeedafbf0 ("bpf: introduce
current->pid, tgid, uid, gid, comm accessors") case, where stack memory
access needs to be statically verified and thus guaranteed to be
initialized in first use (otherwise verifier cannot tell whether a
subsequent access to it is valid or not as it's runtime dependent).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Need to do the unregister_device() after all references to the driver
private have been done.
Also we need to use del_timer_sync() for the timers so that we don't
have any asynchronous references after the unregister.
Signed-off-by: David S. Miller <davem@davemloft.net>
- Select CONFIG_BITREVERSE for sht15 driver to avoid build failure
if it is not configured.
- Force wait for conversion time for the first valid data in tmp102
driver to avoid reporting erroneous data to the thermal subsystem.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=h83R
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus-v4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Select CONFIG_BITREVERSE for sht15 driver to avoid build failure if
it is not configured.
- Force wait for conversion time for the first valid data in tmp102
driver to avoid reporting erroneous data to the thermal subsystem.
* tag 'hwmon-for-linus-v4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (sht15) Select CONFIG_BITREVERSE
hwmon: (tmp102) Force wait for conversion time for the first valid data
When the first request_irq fails in be_msix_register, i value
would be zero. The current code decrements the i value and
accesses the eq object without validating the decremented
"i" value. This can cause an "invalid memory address access"
violation.
This patch fixes the problem by accessing the eq object after
validating the "i" value.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Two similar fixes for the Intel and AMD IOMMU drivers to add
proper access checks before calling handle_mm_fault.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJWdCp7AAoJECvwRC2XARrjjAIP/0ihW2zF4R622RgY1C1Cm62j
0eb/R4UqjI3PG0KsURgDHcIm9JP5Z//dgKTOtNX9KOkHlXLcO9MMSD5chVBd4HKG
+Mgx7RM+Mr7f6ElRUa6s1GY1tcJlGf43fW5cMQ44BJIqVXlE47go4U09D86DVgXy
KgyBxQldeOrkXZvAG82WLjGgkdGALQjbDlI8ktmfYWXAvIRWNGJqWY16BwAYOWfb
9d3+1JPekSSBWHC6H+qbkDb8ueO69/Ux0HL5z2Q0zchqGjBb1gnfwLcz865KZpOB
qUwsKFSXTl+jPCrAaLYJnVqAnH4qqKaF6WKAJSIHObTSVqXKHpFHrQrlGVzOvYNn
s3216KIMsxG2nnvSgXCOFGqM/810MH2MSo8YcF5A3celrka3j2Gj08mxInrZXN7D
3p51HSwq8ePo4i5jppT5ldOBSjNV9N3wKWcjDb4OL+OfkJc/u2VbSHNQtpvTclsV
V6VSfWLDC8BCmUveMH2TrawQWkKOz0LqgqfQPX+VvSCIM7tgkrgVsTJrijPtGOs1
zid/A/cfqMdBezSVALrZfB4OVBaM2UL2LJmmLJgApYV+N55Oxmx+nxnMr0aT5KlY
crjcnVaypkq3rG1Wjpt+nTTwtllB0yXNEywQcu2edeswmaQCqsEgQRsDqi6S2/+S
c8l9JKoTrB4+vToYjXyW
=qrAB
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"Two similar fixes for the Intel and AMD IOMMU drivers to add proper
access checks before calling handle_mm_fault"
* tag 'iommu-fixes-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Do access checks before calling handle_mm_fault()
iommu/amd: Do proper access checking before calling handle_mm_fault()
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains the first batch of Netfilter updates for
the upcoming 4.5 kernel. This batch contains userspace netfilter header
compilation fixes, support for packet mangling in nf_tables, the new
tracing infrastructure for nf_tables and cgroup2 support for iptables.
More specifically, they are:
1) Two patches to include dependencies in our netfilter userspace
headers to resolve compilation problems, from Mikko Rapeli.
2) Four comestic cleanup patches for the ebtables codebase, from Ian Morris.
3) Remove duplicate include in the netfilter reject infrastructure,
from Stephen Hemminger.
4) Two patches to simplify the netfilter defragmentation code for IPv6,
patch from Florian Westphal.
5) Fix root ownership of /proc/net netfilter for unpriviledged net
namespaces, from Philip Whineray.
6) Get rid of unused fields in struct nft_pktinfo, from Florian Westphal.
7) Add mangling support to our nf_tables payload expression, from
Patrick McHardy.
8) Introduce a new netlink-based tracing infrastructure for nf_tables,
from Florian Westphal.
9) Change setter functions in nfnetlink_log to be void, from
Rami Rosen.
10) Add netns support to the cttimeout infrastructure.
11) Add cgroup2 support to iptables, from Tejun Heo.
12) Introduce nfnl_dereference_protected() in nfnetlink, from Florian.
13) Add support for mangling pkttype in the nf_tables meta expression,
also from Florian.
BTW, I need that you pull net into net-next, I have another batch that
requires changes that I don't yet see in net.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Netdevs default to carrier on, we should call netif_carrier_off()
during initialization since we handle carrier state changes in the
driver.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Rolf Neugebauer <rolf.neugebauer@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- XSA-155 security fixes to backend drivers.
- XSA-157 security fixes to pciback.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWdDrXAAoJEFxbo/MsZsTR3N0H/0Lvz6MWBARCje7livbz7nqE
PS0Bea+2yAfNhCDDiDlpV0lor8qlyfWDF6lGhLjItldAzahag3ZDKDf1Z/lcQvhf
3MwFOcOVZE8lLtvLT6LGnPuehi1Mfdi1Qk1/zQhPhsq6+FLPLT2y+whmBihp8mMh
C12f7KRg5r3U7eZXNB6MEtGA0RFrOp0lBdvsiZx3qyVLpezj9mIe0NueQqwY3QCS
xQ0fILp/x2EnZNZuzgghFTPRxMAx5ReOezgn9Rzvq4aThD+irz1y6ghkYN4rG2s2
tyYOTqBnjJEJEQ+wmYMhnfCwVvDffztG+uI9hqN31QFJiNB0xsjSWFCkDAWchiU=
=Argz
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.4-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen bug fixes from David Vrabel:
- XSA-155 security fixes to backend drivers.
- XSA-157 security fixes to pciback.
* tag 'for-linus-4.4-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-pciback: fix up cleanup path when alloc fails
xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set.
xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has MSI(X) enabled.
xen/pciback: Do not install an IRQ handler for MSI interrupts.
xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or MSI-X enabled
xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or MSI-X enabled
xen/pciback: Save xen_pci_op commands before processing it
xen-scsiback: safely copy requests
xen-blkback: read from indirect descriptors only once
xen-blkback: only read request operation from shared ring once
xen-netback: use RING_COPY_REQUEST() throughout
xen-netback: don't use last request to determine minimum Tx credit
xen: Add RING_COPY_REQUEST()
xen/x86/pvh: Use HVM's flush_tlb_others op
xen: Resume PMU from non-atomic context
xen/events/fifo: Consume unprocessed events when a CPU dies
Or Gerlitz says:
====================
Mellanox mlx4 driver fixes
Two small fixes from Jenny for code flows that deal with time-stamping.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
mlx4_en_init_timestamp was called before creation of netdev and port
init, thus used uninitialized values. Specifically - NIC frequency was
incorrect causing wrong calculations and later wrong HW timestamps.
Fixes: 1ec4864b10 ('net/mlx4_en: Fixed crash when port type is changed')
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Marina Varshaver <marinav@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Service task is responsible for other tasks in addition to timestamping
overflow check. Launch it even if timestamping is not supported by device.
Fixes: 07841f9d94 ('net/mlx4_en: Schedule napi when RX buffers allocation fails')
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As usual in rc6, this update contains only a few HD-audio and
USB-audio device-specific quirks: yet another Thinkpad noise fixes,
Dell headphone mic fixes, and AudioQuest DragonFly fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=bf1H
-----END PGP SIGNATURE-----
Merge tag 'sound-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"As usual in rc6, this update contains only a few HD-audio and
USB-audio device-specific quirks: yet another Thinkpad noise fixes,
Dell headphone mic fixes, and AudioQuest DragonFly fixes"
* tag 'sound-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add a fixup for Thinkpad X1 Carbon 2nd
ALSA: hda - Set codec to D3 at reboot/shutdown on Thinkpads
ALSA: hda - Apply click noise workaround for Thinkpads generically
ALSA: hda - Fix headphone mic input on a few Dell ALC293 machines
ALSA: usb-audio: Add sample rate inquiry quirk for AudioQuest DragonFly
ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly
David Rivshin says:
====================
drivers: net: cpsw: Fix bugs in fixed-link PHY DT parsing
Commit 1f71e8c96f ("drivers: net: cpsw:
Add support for fixed-link PHY") added initial fixed-link PHY support
for CPSW, but missed a few considerations.
This series is based on the tip of the net tree. The first two patches
fix user-visible errors in different hardware configurations. The third
patch is for an internal reference counting issue. They are logically
independent changes, but in the same function, so must be applied in
order to apply cleanly.
The first patch was originally submitted by Pascal Speck on December 4,
but was not picked up by patchwork. I suspect that is because the patch
was mangled by the mailer. I fixed the mangling and am including it in
this series, as I believe it is the correct change.
I have tested on the following hardware configurations:
- (EVMSK) dual emac with two real MDIO-connected phys using RGMII-TXID
- single emac with fixed-link using RGMII
Testing of other CPSW emac configurations that folks may have would
be appreciated.
Changes from v1 [1]:
- Split into 3 smaller patches.
- Maintain 1f71e8c96fc6's preference for fixed-link over phy_id if
they are both (incorrectly) specified in the slave node.
- Update binding documentation to no longer say that phy_mode is also
mutually exclusive with fixed-link.
- Dropped unnecessary include of phy_fixed.h.
[1] https://patchwork.ozlabs.org/patch/554989/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When a fixed-link sub-node exists in a slave node, the slave node
is also the PHY node. Since this is a separate use of the slave node,
of_node_get() should be used to increment the reference count.
Fixes: 1f71e8c96f ("drivers: net: cpsw: Add support for fixed-link PHY")
Signed-off-by: David Rivshin <drivshin@allworx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 1f71e8c96f ("drivers: net: cpsw: Add
support for fixed-link PHY") did not parse the "phy-mode" property in
the case of a fixed-link PHY, leaving slave_data->phy_if with its default
of PHY_INTERFACE_MODE_NA(0). This later gets passed to phy_connect() in
cpsw_slave_open(), and eventually to cpsw_phy_sel() where it hits a default
case that configures the MAC for MII mode.
The user visible symptom is that while kernel log messages seem to indicate
that the interface is set up, there is no network communication. Eventually
a watchdog error occurs:
NETDEV WATCHDOG: eth0 (cpsw): transmit queue 0 timed out
Fixes: 1f71e8c96f ("drivers: net: cpsw: Add support for fixed-link PHY")
Signed-off-by: David Rivshin <drivshin@allworx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using more than one slave with ti cpsw and fixed phy the pd->phy_id
will be always zero, but slave_data->phy_id must be unique. pd->phy_id
means a "phy hardware id" whereas slave_data->phy_id means an "unique id",
so we should use pd->addr which has the same unique meaning.
Fixes: 1f71e8c96f ("drivers: net: cpsw: Add support for fixed-link PHY")
Signed-off-by: Pascal Speck <kernel@iktek.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern says:
====================
net: Allow accepted sockets to be bound to l3mdev domain
Allow accepted sockets to derive their sk_bound_dev_if setting from the
l3mdev domain in which the packets originated. This version adds a sysctl
to control whether the setting is inherited, making the functionality
similar to sk_mark and its sysctl_tcp_fwmark_accept setting.
This effectively allow a process to have a "VRF-global" listen socket,
with child sockets bound to the VRF device in which the packet originated.
A similar behavior can be achieved using sk_mark, but a solution using marks
is incomplete as it does not handle duplicate addresses in different L3
domains/VRFs. Allowing sockets to inherit the sk_bound_dev_if from l3mdev
domain provides a complete solution.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow accepted sockets to derive their sk_bound_dev_if setting from the
l3mdev domain in which the packets originated. A sysctl setting is added
to control the behavior which is similar to sk_mark and
sysctl_tcp_fwmark_accept.
This effectively allow a process to have a "VRF-global" listen socket,
with child sockets bound to the VRF device in which the packet originated.
A similar behavior can be achieved using sk_mark, but a solution using marks
is incomplete as it does not handle duplicate addresses in different L3
domains/VRFs. Allowing sockets to inherit the sk_bound_dev_if from l3mdev
domain provides a complete solution.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
