Static analysis discovered that some code in vfio_fsl_mc_set_irq_trigger
is dead code. Fixed the code by changing the conditions order.
Fixes: cc0ee20bd9 ("vfio/fsl-mc: trigger an interrupt via eventfd")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The FSL_MC_BUS on which the VFIO-FSL-MC driver is dependent on
can be compiled on other architectures as well (not only ARM64)
including 32 bit architectures.
Include linux/io-64-nonatomic-hi-lo.h to make writeq/readq used
in the driver available on 32bit platforms.
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Define a new configuration entry VFIO_PCI_ZDEV for VFIO/PCI.
When this s390-only feature is configured we add capabilities to the
VFIO_DEVICE_GET_INFO ioctl that describe features of the associated
zPCI device and its underlying hardware.
This patch is based on work previously done by Pierre Morel.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently only resetting the DPRC container is supported which
will reset all the objects inside it. Resetting individual
objects is possible from the userspace by issueing commands
towards MC firmware.
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The software uses a memory-mapped I/O command interface (MC portals) to
communicate with the MC hardware. This command interface is used to
discover, enumerate, configure and remove DPAA2 objects. The DPAA2
objects use MSIs, so the command interface needs to be emulated
such that the correct MSI is configured in the hardware (the guest
has the virtual MSIs).
This patch is adding read/write support for fsl-mc devices. The mc
commands are emulated by the userspace. The host is just passing
the correct command to the hardware.
Also the current patch limits userspace to write complete
64byte command once and read 64byte response by one ioctl.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch allows to set an eventfd for fsl-mc device interrupts
and also to trigger the interrupt eventfd from userspace for testing.
All fsl-mc device interrupts are MSIs. The MSIs are allocated from
the MSI domain only once per DPRC and used by all the DPAA2 objects.
The interrupts are managed by the DPRC in a pool of interrupts. Each
device requests interrupts from this pool. The pool is allocated
when the first virtual device is setting the interrupts.
The pool of interrupts is protected by a lock.
The DPRC has an interrupt of its own which indicates if the DPRC
contents have changed. However, currently, the contents of a DPRC
assigned to the guest cannot be changed at runtime, so this interrupt
is not configured.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch adds the skeleton for interrupt support
for fsl-mc devices. The interrupts are not yet functional,
the functionality will be added by subsequent patches.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Only the DPRC object allocates interrupts from the MSI
interrupt domain. The interrupts are managed by the DPRC in
a pool of interrupts. The access to this pool of interrupts
has to be protected with a lock.
This patch extends the current lock implementation to have a
lock per DPRC.
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Allow userspace to mmap device regions for direct access of
fsl-mc devices.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Expose to userspace information about the memory regions.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Allow userspace to get fsl-mc device info (number of regions
and irqs).
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The DPRC (Data Path Resource Container) device is a bus device and has
child devices attached to it. When the vfio-fsl-mc driver is probed
the DPRC is scanned and the child devices discovered and initialized.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
DPAA2 (Data Path Acceleration Architecture) consists in
mechanisms for processing Ethernet packets, queue management,
accelerators, etc.
The Management Complex (mc) is a hardware entity that manages the DPAA2
hardware resources. It provides an object-based abstraction for software
drivers to use the DPAA2 hardware. The MC mediates operations such as
create, discover, destroy of DPAA2 objects.
The MC provides memory-mapped I/O command interfaces (MC portals) which
DPAA2 software drivers use to operate on DPAA2 objects.
A DPRC is a container object that holds other types of DPAA2 objects.
Each object in the DPRC is a Linux device and bound to a driver.
The MC-bus driver is a platform driver (different from PCI or platform
bus). The DPRC driver does runtime management of a bus instance. It
performs the initial scan of the DPRC and handles changes in the DPRC
configuration (adding/removing objects).
All objects inside a container share the same hardware isolation
context, meaning that only an entire DPRC can be assigned to
a virtual machine.
When a container is assigned to a virtual machine, all the objects
within that container are assigned to that virtual machine.
The DPRC container assigned to the virtual machine is not allowed
to change contents (add/remove objects) by the guest. The restriction
is set by the host and enforced by the mc hardware.
The DPAA2 objects can be directly assigned to the guest. However
the MC portals (the memory mapped command interface to the MC) need
to be emulated because there are commands that configure the
interrupts and the isolation IDs which are virtual in the guest.
Example:
echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override
echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind
The dprc.2 is bound to the VFIO driver and all the objects within
dprc.2 are going to be bound to the VFIO driver.
This patch adds the infrastructure for VFIO support for fsl-mc
devices. Subsequent patches will add support for binding and secure
assigning these devices using VFIO.
More details about the DPAA2 objects can be found here:
Documentation/networking/device_drivers/freescale/dpaa2/overview.rst
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The count of dirtied pages is not only determined by count of copied
pages, but also by the start offset.
e.g. if offset = PAGE_SIZE - 1, and *copied=2, the dirty pages count
is 2, instead of 1 or 0.
Fixes: d6a4c18566 ("vfio iommu: Implementation of ioctl for dirty pages tracking")
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When error occurs, need to put vfio group after a successful get.
Fixes: 95fc87b441 ("vfio: Selective dirty page tracking if IOMMU backed device pins pages")
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
While it is true that devices with is_virtfn=1 will have a Memory Space
Enable bit that is hard-wired to 0, this is not the only case where we
see this behavior -- For example some bare-metal hypervisors lack
Memory Space Enable bit emulation for devices not setting is_virtfn
(s390). Fix this by instead checking for the newly-added
no_command_memory bit which directly denotes the need for
PCI_COMMAND_MEMORY emulation in vfio.
Fixes: abafbc551f ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Commit 492855939b ("vfio/type1: Limit DMA mappings per container")
added the ability to limit the number of memory backed DMA mappings.
However on s390x, when lazy mapping is in use, we use a very large
number of concurrent mappings. Let's provide the current allowable
number of DMA mappings to userspace via the IOMMU info chain so that
userspace can take appropriate mitigation.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Page pinning is used both to translate and pin device mappings for DMA
purpose, as well as to indicate to the IOMMU backend to limit the dirty
page scope to those pages that have been pinned, in the case of an IOMMU
backed device.
To support this, the vfio_pin_pages() interface limits itself to only
singleton groups such that the IOMMU backend can consider dirty page
scope only at the group level. Implement the same requirement for the
vfio_group_pin_pages() interface.
Fixes: 95fc87b441 ("vfio: Selective dirty page tracking if IOMMU backed device pins pages")
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now we regenerate vconfig for all the BARs via vfio_bar_fixup(), every
time any offset of any of them are read. Though BARs aren't re-read
regularly, the regeneration can be avoided if no BARs had been written
since they were last read, in which case vdev->bardirty is false.
Let's return immediately in vfio_bar_fixup() if bardirty is false.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
It was added by commit 137e553135 ("vfio/pci: Add sriov_configure
support") but duplicates a forward declaration earlier in the file.
Remove it.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The vfio_iommu_replay() function does not currently unwind on error,
yet it does pin pages, perform IOMMU mapping, and modify the vfio_dma
structure to indicate IOMMU mapping. The IOMMU mappings are torn down
when the domain is destroyed, but the other actions go on to cause
trouble later. For example, the iommu->domain_list can be empty if we
only have a non-IOMMU backed mdev attached. We don't currently check
if the list is empty before getting the first entry in the list, which
leads to a bogus domain pointer. If a vfio_dma entry is erroneously
marked as iommu_mapped, we'll attempt to use that bogus pointer to
retrieve the existing physical page addresses.
This is the scenario that uncovered this issue, attempting to hot-add
a vfio-pci device to a container with an existing mdev device and DMA
mappings, one of which could not be pinned, causing a failure adding
the new group to the existing container and setting the conditions
for a subsequent attempt to explode.
To resolve this, we can first check if the domain_list is empty so
that we can reject replay of a bogus domain, should we ever encounter
this inconsistent state again in the future. The real fix though is
to add the necessary unwind support, which means cleaning up the
current pinning if an IOMMU mapping fails, then walking back through
the r-b tree of DMA entries, reading from the IOMMU which ranges are
mapped, and unmapping and unpinning those ranges. To be able to do
this, we also defer marking the DMA entry as IOMMU mapped until all
entries are processed, in order to allow the unwind to know the
disposition of each entry.
Fixes: a54eb55045 ("vfio iommu type1: Add support for mediated devices")
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Tested-by: Zhiyi Guo <zhguo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
A down_read on memory_lock is held when performing read/write accesses
to MMIO BAR space, including across the copy_to/from_user() callouts
which may fault. If the user buffer for these copies resides in an
mmap of device MMIO space, the mmap fault handler will acquire a
recursive read-lock on memory_lock. Avoid this by reducing the lock
granularity. Sequential accesses requiring multiple ioread/iowrite
cycles are expected to be rare, therefore typical accesses should not
see additional overhead.
VGA MMIO accesses are expected to be non-fatal regardless of the PCI
memory enable bit to allow legacy probing, this behavior remains with
a comment added. ioeventfds are now included in memory access testing,
with writes dropped while memory space is disabled.
Fixes: abafbc551f ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Tested-by: Zhiyi Guo <zhguo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
After the cleanup of page fault accounting, gup does not need to pass
task_struct around any more. Remove that parameter in the whole gup
stack.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Link: http://lkml.kernel.org/r/20200707225021.200906-26-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch refactors the vfio_iommu_type1_ioctl() to use switch instead of
if-else, and each command got a helper function.
Cc: Kevin Tian <kevin.tian@intel.com>
CC: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The current generation of Intel® QuickAssist Technology devices
are not designed to run in an untrusted environment because of the
following issues reported in the document "Intel® QuickAssist Technology
(Intel® QAT) Software for Linux" (document number 336211-014):
QATE-39220 - GEN - Intel® QAT API submissions with bad addresses that
trigger DMA to invalid or unmapped addresses can cause a
platform hang
QATE-7495 - GEN - An incorrectly formatted request to Intel® QAT can
hang the entire Intel® QAT Endpoint
The document is downloadable from https://01.org/intel-quickassist-technology
at the following link:
https://01.org/sites/default/files/downloads/336211-014-qatforlinux-releasenotes-hwv1.7_0.pdf
This patch adds the following QAT devices to the denylist: DH895XCC,
C3XXX and C62X.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add denylist of devices that by default are not probed by vfio-pci.
Devices in this list may be susceptible to untrusted application, even
if the IOMMU is enabled. To be accessed via vfio-pci, the user has to
explicitly disable the denylist.
The denylist can be disabled via the module parameter disable_denylist.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
No need to release and immediately re-acquire igate while clearing
out the eventfd ctxs.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This code was using get_user_pages*(), in a "Case 2" scenario
(DMA/RDMA), using the categorization from [1]. That means that it's
time to convert the get_user_pages*() + put_page() calls to
pin_user_pages*() + unpin_user_pages() calls.
There is some helpful background in [2]: basically, this is a small
part of fixing a long-standing disconnect between pinning pages, and
file systems' use of those pages.
[1] Documentation/core-api/pin_user_pages.rst
[2] "Explicit pinning of user-space pages":
https://lwn.net/Articles/807108/
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: kvm@vger.kernel.org
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Commit c5e6688752 ("vfio/type1: Add conditional rescheduling")
missed a "cond_resched()" in vfio_iommu_map if iommu map failed.
This is a very tiny optimization and the case can hardly happen.
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Intel document 333717-008, "Intel® Ethernet Controller X550
Specification Update", version 2.7, dated June 2020, includes errata
#22, added in version 2.1, May 2016, indicating X550 NICs suffer from
the same implementation deficiency as the 700-series NICs:
"The Interrupt Status bit in the Status register of the PCIe
configuration space is not implemented and is not set as described
in the PCIe specification."
Without the interrupt status bit, vfio-pci cannot determine when
these devices signal INTx. They are therefore added to the nointx
quirk.
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
SR-IOV VFs do not implement the memory enable bit of the command
register, therefore this bit is not set in config space after
pci_enable_device(). This leads to an unintended difference
between PF and VF in hand-off state to the user. We can correct
this by setting the initial value of the memory enable bit in our
virtualized config space. There's really no need however to
ever fault a user on a VF though as this would only indicate an
error in the user's management of the enable bit, versus a PF
where the same access could trigger hardware faults.
Fixes: abafbc551f ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The next use of the device will generate an underflow from the
stale reference.
Cc: Qian Cai <cai@lca.pw>
Fixes: 1518ac272e ("vfio/pci: fix memory leaks of eventfd ctx")
Reported-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Switch the function documentation to kerneldoc comments, and add
WARN_ON_ONCE asserts that the calling thread is a kernel thread and does
not have ->mm set (or has ->mm set in the case of unuse_mm).
Also give the functions a kthread_ prefix to better document the use case.
[hch@lst.de: fix a comment typo, cover the newly merged use_mm/unuse_mm caller in vfio]
Link: http://lkml.kernel.org/r/20200416053158.586887-3-hch@lst.de
[sfr@canb.auug.org.au: powerpc/vas: fix up for {un}use_mm() rename]
Link: http://lkml.kernel.org/r/20200422163935.5aa93ba5@canb.auug.org.au
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [usb]
Acked-by: Haren Myneni <haren@linux.ibm.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Link: http://lkml.kernel.org/r/20200404094101.672954-6-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
cover the newly merged use_mm/unuse_mm caller in vfio
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Link: http://lkml.kernel.org/r/20200416053158.586887-2-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert the last few remaining mmap_sem rwsem calls to use the new mmap
locking API. These were missed by coccinelle for some reason (I think
coccinelle does not support some of the preprocessor constructs in these
files ?)
[akpm@linux-foundation.org: convert linux-next leftovers]
[akpm@linux-foundation.org: more linux-next leftovers]
[akpm@linux-foundation.org: more linux-next leftovers]
Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-6-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to make it
safe against parallel page table manipulations without relying on an IPI for
serialisation.
- A series of fixes & enhancements to make our machine check handling more
robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions on
Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to:
Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov,
Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le
Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy,
Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand,
George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni,
Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo
Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael
Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao,
Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram
Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram
Sang, Xiongfeng Wang.
-----BEGIN PGP SIGNATURE-----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=o0WU
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to
make it safe against parallel page table manipulations without
relying on an IPI for serialisation.
- A series of fixes & enhancements to make our machine check handling
more robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions
on Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.
* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
powerpc/pseries: Make vio and ibmebus initcalls pseries specific
cxl: Remove dead Kconfig options
powerpc: Add POWER10 architected mode
powerpc/dt_cpu_ftrs: Add MMA feature
powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
powerpc: Add support for ISA v3.1
powerpc: Add new HWCAP bits
powerpc/64s: Don't set FSCR bits in INIT_THREAD
powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
powerpc/64s: Don't let DT CPU features set FSCR_DSCR
powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
powerpc/module_64: Consolidate ftrace code
powerpc/32: Disable KASAN with pages bigger than 16k
powerpc/uaccess: Don't set KUEP by default on book3s/32
powerpc/uaccess: Don't set KUAP by default on book3s/32
powerpc/8xx: Reduce time spent in allow_user_access() and friends
...
Fixes sparse warnings by adding '__user' in typecast for
copy_[from,to]_user()
Fixes: d6a4c18566 ("vfio iommu: Implementation of ioctl for dirty pages tracking")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Fixes compilation error with ARCH=i386.
Error fixed by this commit:
ld: drivers/vfio/vfio_iommu_type1.o: in function `vfio_dma_populate_bitmap':
>> vfio_iommu_type1.c:(.text+0x666): undefined reference to `__udivdi3'
Fixes: d6a4c18566 ("vfio iommu: Implementation of ioctl for dirty pages tracking")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object. Thus,
replace kfree() by kobject_put() to fix this issue. Previous
commit "b8eb718348b8" fixed a similar problem.
Fixes: 7b96953bc6 ("vfio: Mediated device Core driver")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
