Commit Graph

50 Commits

Author SHA1 Message Date
Alex Williamson
aa93197736 PCI: Never treat a VF as a multifunction device
Per the SR-IOV spec rev 1.1:

  3.4.1.9 Header Type (Offset 0Eh)

  "... For VFs, this register must be RO Zero."

Unfortunately some devices get this wrong, ex. Emulex OneConnect 10Gb NIC.
When they do it makes us handle ACS testing and therefore IOMMU groups as
if they were actual multifunction devices and require ACS capabilities to
make sure there's no peer-to-peer between functions.  VFs are never
traditional multifunction devices, so simply clear this bit before we get
any further into setup.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=68431
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-10 10:05:26 -07:00
ethan.zhao
045cc22e53 PCI: Clear NumVFs when disabling SR-IOV in sriov_init()
When SR-IOV is disabled (VF Enable is cleared), NumVFs is not very useful,
so this patch clears it out to prevent confusing lspci output like that
below.  We already clear NumVFs in sriov_disable(), and this does the same
when we disable SR-IOV as part of parsing the SR-IOV capability.

  $ lspci -vvv -s 13:00.0
  13:00.0 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01)
      Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
          IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
          Initial VFs: 64, Total VFs: 64, Number of VFs: 64, ...

[bhelgaas: changelog]
Signed-off-by: ethan.zhao <ethan.kernel@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-11-22 14:53:27 -07:00
Bjorn Helgaas
f7625980f5 PCI: Fix whitespace, capitalization, and spelling errors
Fix whitespace, capitalization, and spelling errors.  No functional change.
I know "busses" is not an error, but "buses" was more common, so I used it
consistently.

Signed-off-by: Marta Rybczynska <rybczynska@gmail.com> (pci_reset_bridge_secondary_bus())
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-14 11:28:18 -07:00
Stefan Assmann
652d110045 PCI: Return -ENOSYS for SR-IOV operations on non-SR-IOV devices
Change the return value to -ENOSYS if a device is not an SR-IOV PF.
Previously we returned either -ENODEV or -EINVAL.

Also have pci_sriov_get_totalvfs() return 0 in the error case to make the
behaviour consistent whether CONFIG_PCI_IOV is enabled or not.

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-07-31 16:47:56 -06:00
Yijing Wang
19b6984e97 PCI: Update NumVFs register when disabling SR-IOV
Currently, we only update NumVFs register during sriov_enable().
This register should also be updated during sriov_disable() and when
sriov_enable() fails.  Otherwise, we will get the stale "Number of VFs"
info from lspci.

[bhelgaas: changelog]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-07-30 10:35:39 -06:00
Jonghwan Choi
ddc191f529 PCI: Fix comment typo in iov.c
"Devic3" should be "device."

Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-07-25 12:18:41 -06:00
Bjorn Helgaas
df58f46c0f Merge branch 'pci/jiang-bus-lock-v3' into next
* pci/jiang-bus-lock-v3:
  PCI: Return early on allocation failures to unindent mainline code
  PCI: Simplify IOV implementation and fix reference count races
  PCI: Drop redundant setting of bus->is_added in virtfn_add_bus()
  unicore32/PCI: Remove redundant call of pci_bus_add_devices()
  m68k/PCI: Remove redundant call of pci_bus_add_devices()
  PCI: Rename pci_release_bus_bridge_dev() to pci_release_host_bridge_dev()
  PCI: Fix refcount issue in pci_create_root_bus() error recovery path
  ia64/PCI: Clean up pci_scan_root_bus() usage
  PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus)
  PCI: Introduce pci_alloc_dev(struct pci_bus*) to replace alloc_pci_dev()
  PCI: Introduce pci_bus_{get|put}() to manage PCI bus reference count

Conflicts:
	drivers/pci/probe.c
2013-06-14 17:47:46 -06:00
Jiang Liu
dc087f2f6a PCI: Simplify IOV implementation and fix reference count races
Trivial changes to IOV:

  1) use new PCI interfaces to simplify IOV implementation
  2) fix some reference count related race windows

[bhelgaas: fix virtfn_add() add bus/alloc dev error paths]
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Donald Dutile <ddutile@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Ram Pai <linuxram@us.ibm.com>
2013-06-14 17:39:40 -06:00
Jiang Liu
d35329d9f1 PCI: Drop redundant setting of bus->is_added in virtfn_add_bus()
The flag pci_bus->is_added is used to guard invocation of
pcibios_fixup_bus(pci_bus).  When virtfn_add_bus() is called, the
pci_bus->is_added flag has already been set, so remove the redundant

	bus->is_added = 1;

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Donald Dutile <ddutile@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Ram Pai <linuxram@us.ibm.com>
2013-06-14 17:39:20 -06:00
Gu Zheng
8b1fce04dc PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus)
Use the new pci_alloc_dev(bus) to replace the existing using of
alloc_pci_dev(void).

[bhelgaas: drop pci_bus ref later in pci_release_dev()]
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Neela Syam Kolli <megaraidlinux@lsi.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
2013-06-05 13:49:36 -06:00
Xudong Hao
fbf33f516b PCI: Finish SR-IOV VF setup before adding the device
Commit 4f535093cf "PCI: Put pci_dev in device tree as early as possible"
moves device registering from pci_bus_add_devices() to pci_device_add().
That causes problems for virtual functions because device_add(&virtfn->dev)
is called before setting the virtfn->is_virtfn flag, which then causes Xen
to report PCI virtual functions as PCI physical functions.

Fix it by setting virtfn->is_virtfn before calling pci_device_add().

[Jiang Liu]: Move the setting of virtfn->is_virtfn ahead further for better
readability and modify changelog.

Signed-off-by: Xudong Hao <xudong.hao@intel.com>
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org	# v3.9+
2013-05-31 15:30:02 -06:00
Alexander Duyck
5a8eb24292 pci: Add SRIOV helper function to determine if VFs are assigned to guest
This function is meant to add a helper function that will determine if a PF
has any VFs that are currently assigned to a guest.  We currently have been
implementing this function per driver, and going forward I would like to avoid
that by making this function generic and using this helper.

v2: Removed extern from declaration of pci_vfs_assigned in pci.h and return
    0 if SR-IOV is disabled with is inline with other PCI SRIOV functions.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-24 19:31:58 -07:00
Linus Torvalds
556f12f602 PCI changes for the v3.9 merge window:
Host bridge hotplug
     - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu)
     - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu)
     - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu)
     - Stop caching _PRT and make independent of bus numbers (Yinghai Lu)
 
   PCI device hotplug
     - Clean up cpqphp dead code (Sasha Levin)
     - Disable ARI unless device and upstream bridge support it (Yijing Wang)
     - Initialize all hot-added devices (not functions 0-7) (Yijing Wang)
 
   Power management
     - Don't touch ASPM if disabled (Joe Lawrence)
     - Fix ASPM link state management (Myron Stowe)
 
   Miscellaneous
     - Fix PCI_EXP_FLAGS accessor (Alex Williamson)
     - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov)
     - Document hotplug resource and MPS parameters (Yijing Wang)
     - Add accessor for PCIe capabilities (Myron Stowe)
     - Drop pciehp suspend/resume messages (Paul Bolle)
     - Make pci_slot built-in only (not a module) (Jiang Liu)
     - Remove unused PCI/ACPI bind ops (Jiang Liu)
     - Removed used pci_root_bus (Bjorn Helgaas)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRKS3hAAoJEFmIoMA60/r8xxoP/j1CS4oCZAnBIVT9fKBkis+/
 CENcfHIUKj6J9iMfJEVvqBELvqaLqtpeNwAGMcGPxV7VuT3K1QumChfaTpRDP0HC
 VDRmrjcmfenEK+YPOG7acsrTyqk2wjpLOyu9MKRxtC5u7tF6376KQpkEFpO4haL4
 eUHTxfE76OkrPBSvx3+PUSf6jqrvrNbjX8K6HdDVVlm3sVAQKmYJU/Wphv2NPOqa
 CAMyCzEGybFjr8hDRwvWgr+06c718GMwQUbnrPdHXAe7lMNMrN/XVBmU9ABN3Aas
 icd3lrDs+yPObgcO/gT8+sAZErCtdJ9zuHGYHdYpRbIQj/5JT4TMk7tw/Bj7vKY9
 Mqmho9GR5YmYTRN9f1r+2n5AQ/KYWXJDrRNOnt5/ys5BOM3vwJ7WJ902zpSwtFQp
 nLX+oD/hLfzpnoIQGDuBAoAXp2Kam3XWRgVvG78buRNrPj+kUzimk14a8qQeY+CB
 El6UKuwi5Uv/qgs1gAqqjmZmsAkon2DnsRZa6Fl8NTkDlis7LY4gp9OU38ySFpB+
 PhCmRyCZmDDqTVtwj6XzR3nPQ5LBSbvsTfgMxYMIUSXHa06tyb2q5p4mEIas0OmU
 RKaP5xQqZuTgD8fbdYrx0xgSrn7JHt/j/X//Qs6unlLCWhlpm3LjJZKxyw2FwBGr
 o4Lci+PiBh3MowCrju9D
 =ER3b
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Host bridge hotplug
    - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu)
    - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu)
    - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu)
    - Stop caching _PRT and make independent of bus numbers (Yinghai Lu)

  PCI device hotplug
    - Clean up cpqphp dead code (Sasha Levin)
    - Disable ARI unless device and upstream bridge support it (Yijing Wang)
    - Initialize all hot-added devices (not functions 0-7) (Yijing Wang)

  Power management
    - Don't touch ASPM if disabled (Joe Lawrence)
    - Fix ASPM link state management (Myron Stowe)

  Miscellaneous
    - Fix PCI_EXP_FLAGS accessor (Alex Williamson)
    - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov)
    - Document hotplug resource and MPS parameters (Yijing Wang)
    - Add accessor for PCIe capabilities (Myron Stowe)
    - Drop pciehp suspend/resume messages (Paul Bolle)
    - Make pci_slot built-in only (not a module) (Jiang Liu)
    - Remove unused PCI/ACPI bind ops (Jiang Liu)
    - Removed used pci_root_bus (Bjorn Helgaas)"

* tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits)
  PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers
  PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS
  ACPI / PCI: Make pci_slot built-in only, not a module
  PCI/PM: Clear state_saved during suspend
  PCI: Use atomic_inc_return() rather than atomic_add_return()
  PCI: Catch attempts to disable already-disabled devices
  PCI: Disable Bus Master unconditionally in pci_device_shutdown()
  PCI: acpiphp: Remove dead code for PCI host bridge hotplug
  PCI: acpiphp: Create companion ACPI devices before creating PCI devices
  PCI: Remove unused "rc" in virtfn_add_bus()
  PCI: pciehp: Drop suspend/resume ENTRY messages
  PCI/ASPM: Don't touch ASPM if forcibly disabled
  PCI/ASPM: Deallocate upstream link state even if device is not PCIe
  PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc
  PCI: Document hpiosize= and hpmemsize= resource reservation parameters
  PCI: Use PCI Express Capability accessor
  PCI: Introduce accessor to retrieve PCIe Capabilities Register
  PCI: Put pci_dev in device tree as early as possible
  PCI: Skip attaching driver in device_add()
  PCI: acpiphp: Keep driver loaded even if no slots found
  ...
2013-02-25 21:18:18 -08:00
Yijing Wang
40064acf0c PCI: Remove unused "rc" in virtfn_add_bus()
Delete unused variable "rc" to fix build warning in drivers/pci/iov.c

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-02-01 16:00:16 -07:00
Yinghai Lu
4f535093cf PCI: Put pci_dev in device tree as early as possible
We want to put pci_dev structs in the device tree as soon as possible so
for_each_pci_dev() iteration will not miss them, but driver attachment
needs to be delayed until after pci_assign_unassigned_resources() to make
sure all devices have resources assigned first.

This patch moves device registering from pci_bus_add_devices() to
pci_device_add(), which happens earlier, leaving driver attachment in
pci_bus_add_devices().

It also removes unattached child bus handling in pci_bus_add_devices().
That's not needed because child bus via pci_add_new_bus() is already
in parent bus children list.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-25 16:22:37 -07:00
Randy Dunlap
2094f167f6 pci: fix iov.c kernel-doc warnings
Fix kernel-doc warning in iov.c:

  Warning(drivers/pci/iov.c:752): No description found for parameter 'numvfs'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Sorry-by: Don Dutile <ddutile@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-10 14:35:23 -08:00
Bjorn Helgaas
1452cd76a9 PCI: Remove useless "!dev" tests
No need to check "!dev" when the caller should always supply a valid
pointer.  If the caller *doesn't* supply a valid pointer, it probably
won't check for a failure return either.  This way we'll oops and get a
backtrace.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-11-09 21:40:09 -07:00
Bjorn Helgaas
6b13672469 PCI: Use spec names for SR-IOV capability fields
Use the same names (almost) as the spec for TotalVFs, InitialVFs, NumVFs.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-11-09 21:38:53 -07:00
Donald Dutile
bff73156d3 PCI: Provide method to reduce the number of total VFs supported
Some implementations of SRIOV provide a capability structure
value of TotalVFs that is greater than what the software can support.
Provide a method to reduce the capability structure reported value
to the value the driver can support.
This ensures sysfs reports the current capability of the system,
hardware and software.
Example for its use: igb & ixgbe -- report 8 & 64 as TotalVFs,
but drivers only support 7 & 63 maximum.

Signed-off-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-11-09 21:37:39 -07:00
Bjorn Helgaas
94bb346480 Revert "PCI: Use hotplug-safe pci_get_domain_bus_and_slot()"
This reverts commit 433efd2247.

When we remove an SR-IOV device, we have this call chain:

    driver .remove() method
        pci_disable_sriov()
            sriov_disable()
                virtfn_remove()
                    pci_get_domain_bus_and_slot()

sriov_disable() is only called for PFs, not for VFs.  When it's called
for a PF, it loops through all the VFs and calls virtfn_remove() for
each.  But we stop and remove VFs before PFs, so by the time we get
to virtfn_remove(), the VFs have already been stopped and deleted
from the device list.  Now pci_get_domain_bus_and_slot(), which uses
bus_find_device() and relies on that device list, doesn't find the
VFs, so the VF references aren't released correctly.

Reported-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-20 17:10:54 -06:00
Bjorn Helgaas
b895e663f4 Merge branch 'pci/jiang-get-domain-bus-slot' into next
* pci/jiang-get-domain-bus-slot:
  xen-pcifront: Use hotplug-safe pci_get_domain_bus_and_slot()
  PCI: Use hotplug-safe pci_get_domain_bus_and_slot()
  PCI/cpcihp: Use hotplug-safe pci_get_domain_bus_and_slot()
  PCI/vga: Use hotplug-safe pci_get_domain_bus_and_slot()
  ia64/PCI: Use hotplug-safe pci_get_domain_bus_and_slot()
2012-09-17 15:44:20 -06:00
Jiang Liu
433efd2247 PCI: Use hotplug-safe pci_get_domain_bus_and_slot()
Following code has a race window between pci_find_bus() and pci_get_slot()
if PCI hotplug operation happens between them which removes the pci_bus.
So use PCI hotplug safe interface pci_get_domain_bus_and_slot() instead,
which also reduces code complexity.

    struct pci_bus *pci_bus = pci_find_bus(domain, busno);
    struct pci_dev *pci_dev = pci_get_slot(pci_bus, devfn);

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-12 14:14:30 -06:00
Yijing Wang
62f87c0e31 PCI: Introduce pci_pcie_type(dev) to replace pci_dev->pcie_type
Introduce an inline function pci_pcie_type(dev) to extract PCIe
device type from pci_dev->pcie_flags_reg field, and prepare for
removing pci_dev->pcie_type.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-08-23 09:40:57 -06:00
Yinghai Lu
b7eac055c0 PCI: register busn_res for iov bus
Insert that to tree.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-13 15:42:25 -06:00
Yinghai Lu
b918c62e08 PCI: replace struct pci_bus secondary/subordinate with busn_res
Replace the struct pci_bus secondary/subordinate members with the
struct resource busn_res.  Later we'll build a resource tree of these
bus numbers.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-13 15:42:22 -06:00
Yinghai Lu
210647af89 PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device
The old pci_remove_bus_device actually did stop and remove.

Make the name reflect that to reduce confusion.

This patch is done by sed scripts and changes back some incorrect
__pci_remove_bus_device changes.

Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-27 12:12:18 -08:00
Yinghai Lu
09cedbef44 PCI: Fix /sys warning when sriov enabled and card is hot removed
sysfs is a bit stricter now and emits warnings in more cases.

For SRIOV hotplug, we are calling pci_stop_dev() for each VF first
(after we update pci_stop_bus_devices) which remove each VF subdir.  So
double check the VF dir in /sys before trying to remove the physfn link.

Signed-of-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-17 09:22:03 -08:00
Vaidyanathan Srinivasan
8161fe91d8 PCI: set pci sriov page size before reading SRIOV BAR
For an SRIOV device, PCI_SRIOV_SYS_PGSIZE should be set before
the PCI_SRIOV_BAR are queried.  The sys pagesize defaults to 4k,
so this change is required on powerpc box with 64k base page size.
    
This is a regression caused due to moving SRIOV init to sriov_enable().
    
| commit afd24ece5c
| Author: Ram Pai <linuxram@us.ibm.com>
    
| PCI: delay configuration of SRIOV capability
| The SRIOV capability, namely page size and total_vfs of a device are
| configured during enumeration phase of the device.  This can potentially
| interfere with the PCI operations of the platform, if the IOV capability
| of the device is not enabled.
    
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-10 12:01:56 -08:00
Ram Pai
afd24ece5c PCI: delay configuration of SRIOV capability
The SRIOV capability, namely page size and total_vfs of a device are
configured during enumeration phase of the device.  This can potentially
interfere with the PCI operations of the platform, if the IOV capability
of the device is not enabled.

The following patch postpones the configuration of the IOV capability of
the device to a later point, when the IOV capability is explicitly
enabled by the device driver.

The patch is tested on x86 and power platform.

Tested-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06 12:10:49 -08:00
Jan Kiszka
fb51ccbf21 PCI: Rework config space blocking services
pci_block_user_cfg_access was designed for the use case that a single
context, the IPR driver, temporarily delays user space accesses to the
config space via sysfs. This assumption became invalid by the time
pci_dev_reset was added as locking instance. Today, if you run two loops
in parallel that reset the same device via sysfs, you end up with a
kernel BUG as pci_block_user_cfg_access detect the broken assumption.

This reworks the pci_block_user_cfg_access to a sleeping service
pci_cfg_access_lock and an atomic-compatible variant called
pci_cfg_access_trylock. The former not only blocks user space access as
before but also waits if access was already locked. The latter service
just returns false in this case, allowing the caller to resolve the
conflict instead of raising a BUG.

Adaptions of the ipr driver were originally written by Brian King.

Acked-by: Brian King <brking@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06 12:10:33 -08:00
Ram Pai
bbef98ab0f PCI: defer enablement of SRIOV BARS
All the PCI BARs of a device are enabled when the device is enabled
using pci_enable_device().  This unnecessarily enables SRIOV BARs of the
device.

On some platforms, which do not support SRIOV as yet, the
pci_enable_device() fails to enable the device if its SRIOV BARs are not
allocated resources correctly.

The following patch fixes the above problem. The SRIOV BARs are now
enabled when IOV capability of the device is enabled in sriov_enable().

NOTE: Note, there is subtle change in the pci_enable_device() API.  Any
driver that depends on SRIOV BARS to be enabled in pci_enable_device()
can fail.

The patch has been touch tested on power and x86 platform.

Tested-by: Michael Wang <wangyun@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-12-05 10:30:22 -08:00
Paul Gortmaker
363c75db1d pci: Fix files needing export.h for EXPORT_SYMBOL/THIS_MODULE
They were implicitly getting it from device.h --> module.h but
we want to clean that up.  So add the minimal header for these
macros.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:22 -04:00
Joerg Roedel
db3c33c6d3 PCI: Move ATS implementation into own file
ATS does not depend on IOV support, so move the code into
its own file. This file will also include support for the
PRI and PASID capabilities later.
Also give ATS its own Kconfig variable to allow selecting it
without IOV support.

Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-10-14 09:05:33 -07:00
Joerg Roedel
5cdede2408 PCI: Move ATS declarations in seperate header file
This patch moves the relevant declarations from the local
header file in drivers/pci to a more accessible locations so
that it can be used by the AMD IOMMU driver too.
The file is named pci-ats.h because support for the PCI PRI
capability will also be added there in a later patch-set.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-04-11 09:01:41 +02:00
Cam Macdonell
0e52247a2e PCI: fix pci_resource_alignment prototype
This fixes the prototype for both pci_resource_alignment() and
pci_sriov_resource_alignment().

Patch started as debugging effort from Cam Macdonell.

Cc: Cam Macdonell <cam@cs.ualberta.ca>
Cc: Avi Kivity <avi@redhat.com>
[chrisw: add iov bits]
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-09 13:41:25 -07:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Williams, Mitch A
fb8a0d9d1b pci: Add SR-IOV convenience functions and macros
Add and export pci_num_vf to allow other subsystems to determine how many
virtual function devices are associated with an SR-IOV physical function
device.
Add macros dev_is_pci, dev_is_ps, and dev_num_vf to make it easier for
non-PCI specific code to determine SR-IOV capabilities.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12 16:56:07 -08:00
Kenji Kaneshige
5f4d91a122 PCI: use pci_is_pcie() in pci core
Change for PCI core to use pci_is_pcie() instead of checking
pci_dev->is_pcie.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24 15:25:16 -08:00
Chris Wright
6faf17f6f1 PCI SR-IOV: correct broken resource alignment calculations
An SR-IOV capable device includes an SR-IOV PCIe capability which
describes the Virtual Function (VF) BAR requirements.  A typical SR-IOV
device can support multiple VFs whose BARs must be in a contiguous region,
effectively an array of VF BARs.  The BAR reports the size requirement
for a single VF.  We calculate the full range needed by simply multiplying
the VF BAR size with the number of possible VFs and create a resource
spanning the full range.

This all seems sane enough except it artificially inflates the alignment
requirement for the VF BAR.  The VF BAR need only be aligned to the size
of a single BAR not the contiguous range of VF BARs.  This can cause us
to fail to allocate resources for the BAR despite the fact that we
actually have enough space.

This patch adds a thin PCI specific layer over the generic
resource_alignment() function which is aware of the special nature of
VF BARs and does sorting and allocation based on the smaller alignment
requirement.

I recognize that while resource_alignment is generic, it's basically a
PCI helper.  An alternative to this patch is to add PCI VF BAR specific
information to struct resource.  I opted for the extra layer rather than
adding such PCI specific information to struct resource.  This does
have the slight downside that we don't cache the BAR size and re-read
for each alignment query (happens a small handful of times during boot
for each VF BAR).

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Yu Zhao <yu.zhao@intel.com>
Cc: stable@kernel.org
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-30 08:37:25 -07:00
Linus Torvalds
687d680985 Merge git://git.infradead.org/~dwmw2/iommu-2.6.31
* git://git.infradead.org/~dwmw2/iommu-2.6.31:
  intel-iommu: Fix one last ia64 build problem in Pass Through Support
  VT-d: support the device IOTLB
  VT-d: cleanup iommu_flush_iotlb_psi and flush_unmaps
  VT-d: add device IOTLB invalidation support
  VT-d: parse ATSR in DMA Remapping Reporting Structure
  PCI: handle Virtual Function ATS enabling
  PCI: support the ATS capability
  intel-iommu: dmar_set_interrupt return error value
  intel-iommu: Tidy up iommu->gcmd handling
  intel-iommu: Fix tiny theoretical race in write-buffer flush.
  intel-iommu: Clean up handling of "caching mode" vs. IOTLB flushing.
  intel-iommu: Clean up handling of "caching mode" vs. context flushing.
  VT-d: fix invalid domain id for KVM context flush
  Fix !CONFIG_DMAR build failure introduced by Intel IOMMU Pass Through Support
  Intel IOMMU Pass Through Support

Fix up trivial conflicts in drivers/pci/{intel-iommu.c,intr_remapping.c}
2009-06-22 21:38:22 -07:00
Yu Zhao
8c1c699fec PCI: cleanup Function Level Reset
This patch enhances the FLR functions:
  1) remove disable_irq() so the shared IRQ won't be disabled.
  2) replace the 1s wait with 100, 200 and 400ms wait intervals
     for the Pending Transaction.
  3) replace mdelay() with msleep().
  4) add might_sleep().
  5) lock the device to prevent PM suspend from accessing the CSRs
     during the reset.
  6) coding style fixes.

Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-16 14:30:15 -07:00
Yu Zhao
4d135dbee7 PCI: fix SR-IOV function dependency link problem
PCIe root complex integrated endpoint does not implement ARI, so this
kind of endpoint uses 3-bit function number. The function dependency
link of the integrated endpoint should be calculated using the device
number plus the value from function dependency link register.

Normal endpoint always implements ARI and the function dependency link
register contains 8-bit function number (i.e. `devfn' from software's
perspective).

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:20 -07:00
Yu Zhao
e277d2fc79 PCI: handle Virtual Function ATS enabling
The SR-IOV spec requires that the Smallest Translation Unit and
the Invalidate Queue Depth fields in the Virtual Function ATS
capability are hardwired to 0. If a function is a Virtual Function,
then and set its Physical Function's STU before enabling the ATS.

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-18 11:25:58 +01:00
Yu Zhao
302b4215da PCI: support the ATS capability
The PCIe ATS capability makes the Endpoint be able to request the
DMA address translation from the IOMMU and cache the translation
in the device side, thus alleviate IOMMU pressure and improve the
hardware performance in the I/O virtualization environment.

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-18 11:25:54 +01:00
Randy Dunlap
52a8873ba4 PCI-IOV: fix missing kernel-doc
Fix PCI iov kernel-doc warning:

Warning(drivers/pci/iov.c:638): No description found for parameter 'nr_virtfn'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06 11:25:33 -07:00
Yu Zhao
74bb1bcc7d PCI: handle SR-IOV Virtual Function Migration
Add or remove a Virtual Function after receiving a Migrate In or Out
Request.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:28 -07:00
Yu Zhao
dd7cc44d0b PCI: add SR-IOV API for Physical Function driver
Add or remove the Virtual Function when the SR-IOV is enabled or
disabled by the device driver. This can happen anytime rather than
only at the device probe stage.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:26 -07:00
Yu Zhao
a28724b0fb PCI: reserve bus range for SR-IOV device
Reserve the bus number range used by the Virtual Function when
pcibios_assign_all_busses() returns true.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:24 -07:00
Yu Zhao
8c5cdb6adc PCI: restore saved SR-IOV state
Restore the volatile registers in the SR-IOV capability after the
D3->D0 transition.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:24 -07:00
Yu Zhao
d1b054da8f PCI: initialize and release SR-IOV capability
If a device has the SR-IOV capability, initialize it (set the ARI
Capable Hierarchy in the lowest numbered PF if necessary; calculate
the System Page Size for the VF MMIO, probe the VF Offset, Stride
and BARs). A lock for the VF bus allocation is also initialized if
a PF is the lowest numbered PF.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:22 -07:00