Commit Graph

752334 Commits

Author SHA1 Message Date
Ben Hutchings
3976626ea3 drm/msm: Fix possible null dereference on failure of get_pages()
Commit 62e3a3e342 changed get_pages() to initialise
msm_gem_object::pages before trying to initialise msm_gem_object::sgt,
so that put_pages() would properly clean up pages in the failure
case.

However, this means that put_pages() now needs to check that
msm_gem_object::sgt is not null before trying to clean it up, and
this check was only applied to part of the cleanup code.  Move
it all into the conditional block.  (Strictly speaking we don't
need to make the kfree() conditional, but since we can't avoid
checking for null ourselves we may as well do so.)

Fixes: 62e3a3e342 ("drm/msm: fix leak in failed get_pages")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-04-19 10:08:34 -04:00
Jeykumar Sankaran
f2f3df0aa8 drm/msm: Add modifier to mdp_get_format arguments
This change plumbs the new fb modifier through the various mdp/disp
get_format hooks.

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul pimped out commit message a bit]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-04-19 10:08:31 -04:00
Sean Paul
78b32d49c4 drm/msm: Mark the crtc->state->event consumed
Don't leave the event != NULL once it's consumed, this is used a signal
to the atomic helpers that the event will be handled by the driver.

Changes in v2:
- None
Changes in v3:
- Rebased on Archit's private_obj set
Changes in v4:
- None

Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-04-19 10:08:25 -04:00
Abhinav Kumar
f1fa7ff440 drm/msm/dsi: implement auto PHY timing calculator for 10nm PHY
Currently the DSI PHY timings are hard-coded for a specific panel
for the 10nm PHY.

Replace this with the auto PHY timing calculator which can calculate
the PHY timings for any panel.

Changes in v4:
- None

Changes in v3:
- None

Changes in v2:
- None

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-04-19 10:08:16 -04:00
Abhinav Kumar
a56896c56e drm/msm/dsi: check video mode engine status before waiting
Make sure the video mode engine is on before waiting
for the video done interrupt.

Changes in v4:
- Move setting enabled to false earlier

Changes in v3:
- Move the return value check to another
  patch

Changes in v2:
- Replace pr_err with dev_err
- Changed error message

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-04-19 10:08:09 -04:00
Abhinav Kumar
a6bb80f8ef drm/msm/dsi: check return value for video done waits
Check for the return value of wait for video
done waits and print appropriate error message.

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-04-19 10:08:00 -04:00
Wolfram Sang
0cbc94daa5 mmc: renesas_sdhi_internal_dmac: limit DMA RX for old SoCs
Early revisions of certain SoCs cannot do multiple DMA RX streams in
parallel. To avoid data corruption, only allow one DMA RX channel and
fall back to PIO, if needed.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-04-19 14:57:17 +02:00
Anson Huang
7407188489 clocksource/imx-tpm: Correct -ETIME return condition check
The additional brakects added to tpm_set_next_event's return value
computation causes (int) forced type conversion NOT taking effect, and the
incorrect value return will cause various system timer issue, like RCU
stall etc..

Remove the additional brackets to make sure tpm_set_next_event always
returns correct value.

Fixes: 059ab7b82e ("clocksource/drivers/imx-tpm: Add imx tpm timer support")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Dong Aisheng <Aisheng.dong@nxp.com>
Cc: stable@vger.kernel.org
Cc: daniel.lezcano@linaro.org
Cc: Linux-imx@nxp.com
Link: https://lkml.kernel.org/r/1524117883-2484-1-git-send-email-Anson.Huang@nxp.com
2018-04-19 13:21:35 +02:00
Laura Abbott
c3bca5d450 posix-cpu-timers: Ensure set_process_cpu_timer is always evaluated
Commit a9445e47d8 ("posix-cpu-timers: Make set_process_cpu_timer()
more robust") moved the check into the 'if' statement. Unfortunately,
it did so on the right side of an && which means that it may get short
circuited and never evaluated. This is easily reproduced with:

$ cat loop.c
void main() {
  struct rlimit res;
  /* set the CPU time limit */
  getrlimit(RLIMIT_CPU,&res);
  res.rlim_cur = 2;
  res.rlim_max = 2;
  setrlimit(RLIMIT_CPU,&res);

  while (1);
}

Which will hang forever instead of being killed. Fix this by pulling the
evaluation out of the if statement but checking the return value instead.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1568337
Fixes: a9445e47d8 ("posix-cpu-timers: Make set_process_cpu_timer() more robust")
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Cc: "Max R . P . Grossmann" <m@max.pm>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180417215742.2521-1-labbott@redhat.com
2018-04-19 12:54:57 +02:00
Hui Wang
a3dafb2200 ALSA: hda/realtek - adjust the location of one mic
There are two front mics on this machine, if we don't adjust the
location for one of them, they will have the same mixer name,
pulseaudio can't handle this situation.

After applying this FIXUP, they will have different mixer name,
then pulseaudio can handle them correctly.

Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-19 11:44:01 +02:00
Hui Wang
3ce0d5aa26 ALSA: hda/realtek - set PINCFG_HEADSET_MIC to parse_flags
Otherwise, the pin will be regarded as microphone, and the jack name
is "Mic Phantom", it is always on in the pulseaudio even nothing is
plugged into the jack. So the UI is confusing to users since the
microphone always shows up in the UI even there is no microphone
plugged.

After adding this flag, the jack name is "Headset Mic Phantom", then
the pulseaudio can handle its detection correctly.

Fixes: f0ba9d699e ("ALSA: hda/realtek - Fix Dell headset Mic can't record")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-19 11:43:16 +02:00
Jiri Kosina
b658912cb0 HID: i2c-hid: fix inverted return value from i2c_hid_command()
i2c_hid_command() returns non-zero in error cases (the actual
errno). Error handling in for I2C_HID_QUIRK_RESEND_REPORT_DESCR
case in i2c_hid_resume() had the check inverted; fix that.

Fixes: 3e83eda467 ("HID: i2c-hid: Fix resume issue on Raydium touchscreen device")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-19 09:25:15 +02:00
Michael Ellerman
56376c5864 powerpc/kvm: Fix lockups when running KVM guests on Power8
When running KVM guests on Power8 we can see a lockup where one CPU
stops responding. This often leads to a message such as:

  watchdog: CPU 136 detected hard LOCKUP on other CPUs 72
  Task dump for CPU 72:
  qemu-system-ppc R  running task    10560 20917  20908 0x00040004

And then backtraces on other CPUs, such as:

  Task dump for CPU 48:
  ksmd            R  running task    10032  1519      2 0x00000804
  Call Trace:
    ...
    --- interrupt: 901 at smp_call_function_many+0x3c8/0x460
        LR = smp_call_function_many+0x37c/0x460
    pmdp_invalidate+0x100/0x1b0
    __split_huge_pmd+0x52c/0xdb0
    try_to_unmap_one+0x764/0x8b0
    rmap_walk_anon+0x15c/0x370
    try_to_unmap+0xb4/0x170
    split_huge_page_to_list+0x148/0xa30
    try_to_merge_one_page+0xc8/0x990
    try_to_merge_with_ksm_page+0x74/0xf0
    ksm_scan_thread+0x10ec/0x1ac0
    kthread+0x160/0x1a0
    ret_from_kernel_thread+0x5c/0x78

This is caused by commit 8c1c7fb0b5 ("powerpc/64s/idle: avoid sync
for KVM state when waking from idle"), which added a check in
pnv_powersave_wakeup() to see if the kvm_hstate.hwthread_state is
already set to KVM_HWTHREAD_IN_KERNEL, and if so to skip the store and
test of kvm_hstate.hwthread_req.

The problem is that the primary does not set KVM_HWTHREAD_IN_KVM when
entering the guest, so it can then come out to cede with
KVM_HWTHREAD_IN_KERNEL set. It can then go idle in kvm_do_nap after
setting hwthread_req to 1, but because hwthread_state is still
KVM_HWTHREAD_IN_KERNEL we will skip the test of hwthread_req when we
wake up from idle and won't go to kvm_start_guest. From there the
thread will return somewhere garbage and crash.

Fix it by skipping the store of hwthread_state, but not the test of
hwthread_req, when coming out of idle. It's OK to skip the sync in
that case because hwthread_req will have been set on the same thread,
so there is no synchronisation required.

Fixes: 8c1c7fb0b5 ("powerpc/64s/idle: avoid sync for KVM state when waking from idle")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-19 16:22:20 +10:00
Long Li
ab60ee7bf9 cifs: smbd: Check for iov length on sending the last iov
When sending the last iov that breaks into smaller buffers to fit the
transfer size, it's necessary to check if this is the last iov.

If this is the latest iov, stop and proceed to send pages.

Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-04-18 22:02:49 -05:00
Michael Neuling
13a83eac37 powerpc/eeh: Fix enabling bridge MMIO windows
On boot we save the configuration space of PCIe bridges. We do this so
when we get an EEH event and everything gets reset that we can restore
them.

Unfortunately we save this state before we've enabled the MMIO space
on the bridges. Hence if we have to reset the bridge when we come back
MMIO is not enabled and we end up taking an PE freeze when the driver
starts accessing again.

This patch forces the memory/MMIO and bus mastering on when restoring
bridges on EEH. Ideally we'd do this correctly by saving the
configuration space writes later, but that will have to come later in
a larger EEH rewrite. For now we have this simple fix.

The original bug can be triggered on a boston machine by doing:
  echo 0x8000000000000000 > /sys/kernel/debug/powerpc/PCI0001/err_injct_outbound
On boston, this PHB has a PCIe switch on it.  Without this patch,
you'll see two EEH events, 1 expected and 1 the failure we are fixing
here. The second EEH event causes the anything under the PHB to
disappear (i.e. the i40e eth).

With this patch, only 1 EEH event occurs and devices properly recover.

Fixes: 652defed48 ("powerpc/eeh: Check PCIe link after reset")
Cc: stable@vger.kernel.org # v3.11+
Reported-by: Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-19 13:02:38 +10:00
Subash Abhinov Kasiviswanathan
64e86fec54 net: qualcomm: rmnet: Fix warning seen with fill_info
When the last rmnet device attached to a real device is removed, the
real device is unregistered from rmnet. As a result, the real device
lookup fails resulting in a warning when the fill_info handler is
called as part of the rmnet device unregistration.

Fix this by returning the rmnet flags as 0 when no real device is
present.

WARNING: CPU: 0 PID: 1779 at net/core/rtnetlink.c:3254
rtmsg_ifinfo_build_skb+0xca/0x10d
Modules linked in:
CPU: 0 PID: 1779 Comm: ip Not tainted 4.16.0-11872-g7ce2367 #1
Stack:
 7fe655f0 60371ea3 00000000 00000000
 60282bc6 6006b116 7fe65600 60371ee8
 7fe65660 6003a68c 00000000 900000000
Call Trace:
 [<6006b116>] ? printk+0x0/0x94
 [<6001f375>] show_stack+0xfe/0x158
 [<60371ea3>] ? dump_stack_print_info+0xe8/0xf1
 [<60282bc6>] ? rtmsg_ifinfo_build_skb+0xca/0x10d
 [<6006b116>] ? printk+0x0/0x94
 [<60371ee8>] dump_stack+0x2a/0x2c
 [<6003a68c>] __warn+0x10e/0x13e
 [<6003a82c>] warn_slowpath_null+0x48/0x4f
 [<60282bc6>] rtmsg_ifinfo_build_skb+0xca/0x10d
 [<60282c4d>] rtmsg_ifinfo_event.part.37+0x1e/0x43
 [<60282c2f>] ? rtmsg_ifinfo_event.part.37+0x0/0x43
 [<60282d03>] rtmsg_ifinfo+0x24/0x28
 [<60264e86>] dev_close_many+0xba/0x119
 [<60282cdf>] ? rtmsg_ifinfo+0x0/0x28
 [<6027c225>] ? rtnl_is_locked+0x0/0x1c
 [<6026ca67>] rollback_registered_many+0x1ae/0x4ae
 [<600314be>] ? unblock_signals+0x0/0xae
 [<6026cdc0>] ? unregister_netdevice_queue+0x19/0xec
 [<6026ceec>] unregister_netdevice_many+0x21/0xa1
 [<6027c765>] rtnl_delete_link+0x3e/0x4e
 [<60280ecb>] rtnl_dellink+0x262/0x29c
 [<6027c241>] ? rtnl_get_link+0x0/0x3e
 [<6027f867>] rtnetlink_rcv_msg+0x235/0x274

Fixes: be81a85f5f ("net: qualcomm: rmnet: Implement fill_info")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18 21:23:06 -04:00
David Sterba
92d3217084 btrfs: fix unaligned access in readdir
The last update to readdir introduced a temporary buffer to store the
emitted readdir data, but as there are file names of variable length,
there's a lot of unaligned access.

This was observed on a sparc64 machine:

  Kernel unaligned access at TPC[102f3080] btrfs_real_readdir+0x51c/0x718 [btrfs]

Fixes: 23b5ec7494 ("btrfs: fix readdir deadlock with pagefault")
CC: stable@vger.kernel.org # 4.14+
Reported-and-tested-by: René Rebe <rene@exactcode.com>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-04-19 00:35:08 +02:00
Matt Redfearn
b3d7e55c3f
MIPS: uaccess: Add micromips clobbers to bzero invocation
The micromips implementation of bzero additionally clobbers registers t7
& t8. Specify this in the clobbers list when invoking bzero.

Fixes: 26c5e07d14 ("MIPS: microMIPS: Optimise 'memset' core library function.")
Reported-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.10+
Patchwork: https://patchwork.linux-mips.org/patch/19110/
Signed-off-by: James Hogan <jhogan@kernel.org>
2018-04-18 22:02:29 +01:00
Matt Redfearn
c96eebf076
MIPS: memset.S: Fix clobber of v1 in last_fixup
The label .Llast_fixup\@ is jumped to on page fault within the final
byte set loop of memset (on < MIPSR6 architectures). For some reason, in
this fault handler, the v1 register is randomly set to a2 & STORMASK.
This clobbers v1 for the calling function. This can be observed with the
following test code:

static int __init __attribute__((optimize("O0"))) test_clear_user(void)
{
  register int t asm("v1");
  char *test;
  int j, k;

  pr_info("\n\n\nTesting clear_user\n");
  test = vmalloc(PAGE_SIZE);

  for (j = 256; j < 512; j++) {
    t = 0xa5a5a5a5;
    if ((k = clear_user(test + PAGE_SIZE - 256, j)) != j - 256) {
        pr_err("clear_user (%px %d) returned %d\n", test + PAGE_SIZE - 256, j, k);
    }
    if (t != 0xa5a5a5a5) {
       pr_err("v1 was clobbered to 0x%x!\n", t);
    }
  }

  return 0;
}
late_initcall(test_clear_user);

Which demonstrates that v1 is indeed clobbered (MIPS64):

Testing clear_user
v1 was clobbered to 0x1!
v1 was clobbered to 0x2!
v1 was clobbered to 0x3!
v1 was clobbered to 0x4!
v1 was clobbered to 0x5!
v1 was clobbered to 0x6!
v1 was clobbered to 0x7!

Since the number of bytes that could not be set is already contained in
a2, the andi placing a value in v1 is not necessary and actively
harmful in clobbering v1.

Reported-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/19109/
Signed-off-by: James Hogan <jhogan@kernel.org>
2018-04-18 21:57:29 +01:00
Linus Torvalds
87ef12027b A couple of follow-up patches for -rc1 changes in rbd, support for
a timeout on waiting for the acquisition of exclusive lock and a fix
 for uninitialized memory access in CephFS, marked for stable.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJa11lwAAoJEEp/3jgCEfOL1vIH/2kQBY8IVm8ogdZNE9SzSfDO
 loqLX5Wv/4zcCRKss4bgX4agapDgKwoDwGaJPJCeWIE6IC5n2ytcLeIDMYE7UT/i
 H5yIvMqlG2PuC3js9zGLK2C3EKSngGG3sI+aOC+KILQg2vFxg4HelwPEf6Z89rbK
 YCzYjrzQ62scCDq3g/XOUqNjeX+G2IgqFnfdYquqg2lfLPf8RE5foGXN8d+FqUgZ
 xlUwYMDiYechp0KNNVV14WYwG8qSp9WqoaBMqXuTRTEoKgcEUNrFt294UNsis3jQ
 ECqA6PZ+Cl+gPjetrso0oly5Axuj2K99FVkiOQlvgzInW8fkqmOllGatRIA4zBk=
 =UbSe
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-4.17-rc2' of git://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
 "A couple of follow-up patches for -rc1 changes in rbd, support for a
  timeout on waiting for the acquisition of exclusive lock and a fix for
  uninitialized memory access in CephFS, marked for stable"

* tag 'ceph-for-4.17-rc2' of git://github.com/ceph/ceph-client:
  rbd: notrim map option
  rbd: adjust queue limits for "fancy" striping
  rbd: avoid Wreturn-type warnings
  ceph: always update atime/mtime/ctime for new inode
  rbd: support timeout in rbd_wait_state_locked()
  rbd: refactor rbd_wait_state_locked()
2018-04-18 12:48:17 -07:00
Arnaldo Carvalho de Melo
eccb1b9363 perf test BPF: Fixup BPF test using epoll_pwait syscall function probe
Since e145242ea0 ("syscalls/core, syscalls/x86: Clean up syscall stub
naming convention") changed the main syscall function for 'epoll_pwait'
to something other than the expected 'SyS_epoll_pwait the' 'perf test
BPF' entries started failing, fix it by using something called from the
main syscall function instead, 'epoll_wait', which should keep this test
working in older kernels too.

Before:

  # perf test BPF
  40: BPF filter                           :
  40.1: Basic BPF filtering                : FAILED!
  40.2: BPF pinning                        : Skip
  40.3: BPF prologue generation            : Skip
  40.4: BPF relocation checker             : Skip

If we use -v for that test we see the problem:

    Probe point 'SyS_epoll_pwait' not found.

After:

  # perf test BPF
  40: BPF filter                           :
  40.1: Basic BPF filtering                : Ok
  40.2: BPF pinning                        : Ok
  40.3: BPF prologue generation            : Ok
  40.4: BPF relocation checker             : Ok
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/r/tip-y24nmn70cs2am8jh4i344dng@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18 15:35:53 -03:00
Arnaldo Carvalho de Melo
518c6021e9 perf tests mmap: Show which tracepoint is failing
In the 'perf test "mmap interface"' we try creating events for several
tracepoints, but when perf_evsel__new() fails we're not showing which
one is failing, fix that to help diagnosing problems, such as the
syscall tracepoints ones being found and fixes in this merge window.

Now the failing tests shows:

  # perf test -v "mmap interface"
 4: Read samples using the mmap interface                 :
  --- start ---
  test child forked, pid 14311
  <SNIP>
  perf_evsel__new(sys_enter_getppid)
  test child finished with -1
  ---- end ----
  Read samples using the mmap interface: FAILED!
  #

Now to check why the syscalls:sys_enter_getppid is failing...

  # ls -la /sys/kernel/debug/tracing/events/syscalls/sys_enter_getppid
  ls: cannot access '/sys/kernel/debug/tracing/events/syscalls/sys_enter_getppid': No such file or directory
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-44xk0ycdzrfzx1o9rklf5itl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18 15:35:52 -03:00
Ravi Bangoria
66f5a0779a perf tools: Add '\n' at the end of parse-options error messages
Few error messages does not have '\n' at the end and thus next prompt
gets printed in the same line. Ex,

  linux~$ perf buildid-cache -verbose --add ./a.out
   Error: did you mean `--verbose` (with two dashes ?)linux~$

Fix it.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Sihyeon Jang <uneedsihyeon@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180417041346.5617-2-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18 15:35:51 -03:00
Andi Kleen
ccbb6afe08 perf record: Remove suggestion to enable APIC
'perf record' suggests to enable the APIC on errors.

APIC is practically always used today and the problem is usually
somewhere else.

Just remove the outdated suggestion.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20180406203812.3087-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18 15:35:50 -03:00
Andi Kleen
ec3948451e perf record: Remove misleading error suggestion
When perf record encounters an error setting up an event it suggests
to enable CONFIG_PERF_EVENTS. This is misleading because:

- Usually it is enabled (it is really hard to disable on x86)

- The problem is usually somewhere else, e.g. the CPU is not supported
or an invalid configuration has been used.

Remove the misleading suggestion.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20180406203812.3087-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18 15:35:49 -03:00
Andi Kleen
6a02f06ede perf hists browser: Clarify top/report browser help
Clarify in the browser help that ESC in tui mode may go back to the
previous screen instead of just exiting (was not clear to me)

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20180406203812.3087-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18 15:35:49 -03:00
Andi Kleen
a7e9eab3db perf mem: Allow all record/report options
For perf mem report / perf mem record, pass all unknown options
through to the underlying report/record commands. This makes things
like

perf mem record -a sleep 1

work. Matches how c2c and other tools work.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20180406203812.3087-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18 15:35:48 -03:00
Arnaldo Carvalho de Melo
4e5c01a7c7 perf trace: Support MAP_FIXED_NOREPLACE
Introduced in a4ff8e8620 ("mm: introduce MAP_FIXED_NOREPLACE"), and
now that we have that define in the just syncronized
tools/arch/*/include/uapi/asm/mman.h files, add support for it.

This should really transition to autogeneration of string tables as
done for various other things:

  $ ls /tmp/build/perf/trace/beauty/generated/*.c
  arch_errno_name_array.c kcmp_type_array.c madvise_behavior_array.c
  pkey_alloc_access_rights_array.c prctl_option_array.c
  $ head /tmp/build/perf/trace/beauty/generated/madvise_behavior_array.c
  static const char *madvise_advices[] = {
	[0] = "NORMAL",
	[1] = "RANDOM",
	[2] = "SEQUENTIAL",
	[3] = "WILLNEED",
	[4] = "DONTNEED",
	[8] = "FREE",
	[9] = "REMOVE",
	[10] = "DONTFORK",
	[11] = "DOFORK",
  $

Till then, add support for this the old way.

Also it has to be ifdef'ed, because arches like mips still don't define
it. The proper solution will be to have per-arch tables for these
values to support cross-analysis.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-td9t5vhjltqnlzaurkkgq8cn@git.kernel.org
Signef-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-18 15:34:52 -03:00
Bjørn Mork
81c895072d tun: fix vlan packet truncation
Bogus trimming in tun_net_xmit() causes truncated vlan packets.

skb->len is correct whether or not skb_vlan_tag_present() is true. There
is no more reason to adjust the skb length on xmit in this driver than
any other driver. tun_put_user() adds 4 bytes to the total for tagged
packets because it transmits the tag inline to userspace.  This is
similar to a nic transmitting the tag inline on the wire.

Reproducing the bug by sending any tagged packet through back-to-back
connected tap interfaces:

 socat TUN,tun-type=tap,iff-up,tun-name=in TUN,tun-type=tap,iff-up,tun-name=out &
 ip link add link in name in.20 type vlan id 20
 ip addr add 10.9.9.9/24 dev in.20
 ip link set in.20 up
 tshark -nxxi in -f arp -c1 2>/dev/null &
 tshark -nxxi out -f arp -c1 2>/dev/null &
 ping -c 1 10.9.9.5 >/dev/null 2>&1

The output from the 'in' and 'out' interfaces are different when the
bug is present:

 Capturing on 'in'
 0000  ff ff ff ff ff ff 76 cf 76 37 d5 0a 81 00 00 14   ......v.v7......
 0010  08 06 00 01 08 00 06 04 00 01 76 cf 76 37 d5 0a   ..........v.v7..
 0020  0a 09 09 09 00 00 00 00 00 00 0a 09 09 05         ..............

 Capturing on 'out'
 0000  ff ff ff ff ff ff 76 cf 76 37 d5 0a 81 00 00 14   ......v.v7......
 0010  08 06 00 01 08 00 06 04 00 01 76 cf 76 37 d5 0a   ..........v.v7..
 0020  0a 09 09 09 00 00 00 00 00 00                     ..........

Fixes: aff3d70a07 ("tun: allow to attach ebpf socket filter")
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18 13:50:29 -04:00
Tung Nguyen
36a50a989e tipc: fix infinite loop when dumping link monitor summary
When configuring the number of used bearers to MAX_BEARER and issuing
command "tipc link monitor summary", the command enters infinite loop
in user space.

This issue happens because function tipc_nl_node_dump_monitor() returns
the wrong 'prev_bearer' value when all potential monitors have been
scanned.

The correct behavior is to always try to scan all monitors until either
the netlink message is full, in which case we return the bearer identity
of the affected monitor, or we continue through the whole bearer array
until we can return MAX_BEARERS. This solution also caters for the case
where there may be gaps in the bearer array.

Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18 13:48:43 -04:00
Jon Maloy
be47e41d77 tipc: fix use-after-free in tipc_nametbl_stop
When we delete a service item in tipc_nametbl_stop() we loop over
all service ranges in the service's RB tree, and for each service
range we loop over its pertaining publications while calling
tipc_service_remove_publ() for each of them.

However, tipc_service_remove_publ() has the side effect that it also
removes the comprising service range item when there are no publications
left. This leads to a "use-after-free" access when the inner loop
continues to the next iteration, since the range item holding the list
we are looping no longer exists.

We fix this by moving the delete of the service range item outside
the said function. Instead, we now let the two functions calling it
test if the list is empty and perform the removal when that is the
case.

Reported-by: syzbot+d64b64afc55660106556@syzkaller.appspotmail.com
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18 13:48:43 -04:00
Benjamin Herrenschmidt
b32e56e5a8 powerpc/xive: Fix trying to "push" an already active pool VP
When setting up a CPU, we "push" (activate) a pool VP for it.

However it's an error to do so if it already has an active
pool VP.

This happens when doing soft CPU hotplug on powernv since we
don't tear down the CPU on unplug. The HW flags the error which
gets captured by the diagnostics.

Fix this by making sure to "pull" out any already active pool
first.

Fixes: 243e25112d ("powerpc/xive: Native exploitation of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-19 00:49:45 +10:00
Qu Wenruo
336a8bb8e3 btrfs: Fix wrong btrfs_delalloc_release_extents parameter
Commit 43b18595d6 ("btrfs: qgroup: Use separate meta reservation type
for delalloc") merged into mainline is not the latest version submitted
to mail list in Dec 2017.

It has a fatal wrong @qgroup_free parameter, which results increasing
qgroup metadata pertrans reserved space, and causing a lot of early EDQUOT.

Fix it by applying the correct diff on top of current branch.

Fixes: 43b18595d6 ("btrfs: qgroup: Use separate meta reservation type for delalloc")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-04-18 16:46:57 +02:00
Qu Wenruo
f218ea6c47 btrfs: delayed-inode: Remove wrong qgroup meta reservation calls
Commit 4f5427ccce ("btrfs: delayed-inode: Use new qgroup meta rsv for
delayed inode and item") merged into mainline was not latest version
submitted to the mail list in Dec 2017.

Which lacks the following fixes:

1) Remove btrfs_qgroup_convert_reserved_meta() call in
   btrfs_delayed_item_release_metadata()
2) Remove btrfs_qgroup_reserve_meta_prealloc() call in
   btrfs_delayed_inode_reserve_metadata()

Those fixes will resolve unexpected EDQUOT problems.

Fixes: 4f5427ccce ("btrfs: delayed-inode: Use new qgroup meta rsv for delayed inode and item")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-04-18 16:46:55 +02:00
Qu Wenruo
ff6bc37eb7 btrfs: qgroup: Use independent and accurate per inode qgroup rsv
Unlike reservation calculation used in inode rsv for metadata, qgroup
doesn't really need to care about things like csum size or extent usage
for the whole tree COW.

Qgroups care more about net change of the extent usage.
That's to say, if we're going to insert one file extent, it will mostly
find its place in COWed tree block, leaving no change in extent usage.
Or causing a leaf split, resulting in one new net extent and increasing
qgroup number by nodesize.
Or in an even more rare case, increase the tree level, increasing qgroup
number by 2 * nodesize.

So here instead of using the complicated calculation for extent
allocator, which cares more about accuracy and no error, qgroup doesn't
need that over-estimated reservation.

This patch will maintain 2 new members in btrfs_block_rsv structure for
qgroup, using much smaller calculation for qgroup rsv, reducing false
EDQUOT.

Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
2018-04-18 16:46:51 +02:00
Qu Wenruo
a514d63882 btrfs: qgroup: Commit transaction in advance to reduce early EDQUOT
Unlike previous method that tries to commit transaction inside
qgroup_reserve(), this time we will try to commit transaction using
fs_info->transaction_kthread to avoid nested transaction and no need to
worry about locking context.

Since it's an asynchronous function call and we won't wait for
transaction commit, unlike previous method, we must call it before we
hit the qgroup limit.

So this patch will use the ratio and size of qgroup meta_pertrans
reservation as indicator to check if we should trigger a transaction
commit.  (meta_prealloc won't be cleaned in transaction committ, it's
useless anyway)

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-04-18 16:46:47 +02:00
Jan Kara
44f06ba829 udf: Fix leak of UTF-16 surrogates into encoded strings
OSTA UDF specification does not mention whether the CS0 charset in case
of two bytes per character encoding should be treated in UTF-16 or
UCS-2. The sample code in the standard does not treat UTF-16 surrogates
in any special way but on systems such as Windows which work in UTF-16
internally, filenames would be treated as being in UTF-16 effectively.
In Linux it is more difficult to handle characters outside of Base
Multilingual plane (beyond 0xffff) as NLS framework works with 2-byte
characters only. Just make sure we don't leak UTF-16 surrogates into the
resulting string when loading names from the filesystem for now.

CC: stable@vger.kernel.org # >= v4.6
Reported-by: Mingye Wang <arthur200126@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2018-04-18 16:34:55 +02:00
Mark Rutland
b2d71b3cda arm64: signal: don't force known signals to SIGKILL
Since commit:

  a7e6f1ca90 ("arm64: signal: Force SIGKILL for unknown signals in force_signal_inject")

... any signal which is not SIGKILL will be upgraded to a SIGKILL be
force_signal_inject(). This includes signals we do expect, such as
SIGILL triggered by do_undefinstr().

Fix the check to use a logical AND rather than a logical OR, permitting
signals whose layout is SIL_FAULT.

Fixes: a7e6f1ca90 ("arm64: signal: Force SIGKILL for unknown signals in force_signal_inject")
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-04-18 15:13:27 +01:00
Viresh Kumar
e04907dbc2 dt-bindings: thermal: Remove "cooling-{min|max}-level" properties
The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of kernel currently and the max cooling state of a
CPU cooling device is found by referring to the cpufreq table instead.

Remove the unused bindings.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-04-18 07:04:28 -07:00
Bartlomiej Zolnierkiewicz
8b8b5903d5 dt-bindings: thermal: remove no longer needed samsung thermal properties
Remove documentation for longer needed samsung thermal properties.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-04-18 07:03:22 -07:00
Imre Deak
7eb2c4dd54 drm/i915: Fix LSPCON TMDS output buffer enabling from low-power state
LSPCON adapters in low-power state may ignore the first I2C write during
TMDS output buffer enabling, resulting in a blank screen even with an
otherwise enabled pipe. Fix this by reading back and validating the
written value a few times.

The problem was noticed on GLK machines with an onboard LSPCON adapter
after entering/exiting DC5 power state. Doing an I2C read of the adapter
ID as the first transaction - instead of the I2C write to enable the
TMDS buffers - returns the correct value. Based on this we assume that
the transaction itself is sent properly, it's only the adapter that is
not ready for some reason to accept this first write after waking from
low-power state. In my case the second I2C write attempt always
succeeded.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105854
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180416155309.11100-1-imre.deak@intel.com
2018-04-18 16:33:14 +03:00
Gaurav K Singh
b461573053 drm/i915/audio: Fix audio detection issue on GLK
On Geminilake, sometimes audio card is not getting
detected after reboot. This is a spurious issue happening on
Geminilake. HW codec and HD audio controller link was going
out of sync for which there was a fix in i915 driver but
was not getting invoked for GLK. Extending this fix to GLK as well.

Tested by Du,Wenkai on GLK board.

Bspec: 21829

v2: Instead of checking GEN9_BC, BXT and GLK macros, use IS_GEN9 macro (Jani N)

Cc: <stable@vger.kernel.org> # b651bd2a3a ("drm/i915/audio: Fix audio enumeration issue on BXT")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com>
Reviewed-by: Abhay Kumar <abhay.Kumar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523989338-29677-1-git-send-email-gaurav.k.singh@intel.com
(cherry picked from commit 8221229046)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-04-18 14:26:15 +03:00
Chris Wilson
4a0559ed99 drm/i915: Call i915_perf_fini() on init_hw error unwind
We have to cleanup after i915_perf_init(), even on the error path, as it
passes a pointer into the module to the sysfs core. If we fail to
unregister the sysctl table, we leave a dangling pointer which then may
explode anytime later.

Fixes: 9f9b2792b6 ("drm/i915/perf: reuse timestamp frequency from device info")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180414091233.32224-1-chris@chris-wilson.co.uk
(cherry picked from commit 9f172f6fbd)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-04-18 14:17:18 +03:00
Jani Nikula
a3520b8992 drm/i915/bios: filter out invalid DDC pins from VBT child devices
The VBT contains the DDC pin to use for specific ports. Alas, sometimes
the field appears to contain bogus data, and while we check for it later
on in intel_gmbus_get_adapter() we fail to check the returned NULL on
errors. Oops results.

The simplest approach seems to be to catch and ignore the bogus DDC pins
already at the VBT parsing phase, reverting to fixed per port default
pins. This doesn't guarantee display working, but at least it prevents
the oops. And we continue to be fuzzed by VBT.

One affected machine is Dell Latitude 5590 where a BIOS upgrade added
invalid DDC pins.

Typical backtrace:

[   35.461411] WARN_ON(!intel_gmbus_is_valid_pin(dev_priv, pin))
[   35.461432] WARNING: CPU: 6 PID: 411 at drivers/gpu/drm/i915/intel_i2c.c:844 intel_gmbus_get_adapter+0x32/0x37 [i915]
[   35.461437] Modules linked in: i915 ahci libahci dm_snapshot dm_bufio dm_raid raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx
[   35.461445] CPU: 6 PID: 411 Comm: kworker/u16:2 Not tainted 4.16.0-rc7.x64-g1cda370ffded #1
[   35.461447] Hardware name: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018
[   35.461450] Workqueue: events_unbound async_run_entry_fn
[   35.461465] RIP: 0010:intel_gmbus_get_adapter+0x32/0x37 [i915]
[   35.461467] RSP: 0018:ffff9b4e43d47c40 EFLAGS: 00010286
[   35.461469] RAX: 0000000000000000 RBX: ffff98f90639f800 RCX: ffffffffae051960
[   35.461471] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000246
[   35.461472] RBP: ffff98f905410000 R08: 0000004d062a83f6 R09: 00000000000003bd
[   35.461474] R10: 0000000000000031 R11: ffffffffad4eda58 R12: ffff98f905410000
[   35.461475] R13: ffff98f9064c1000 R14: ffff9b4e43d47cf0 R15: ffff98f905410000
[   35.461477] FS:  0000000000000000(0000) GS:ffff98f92e580000(0000) knlGS:0000000000000000
[   35.461479] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   35.461481] CR2: 00007f5682359008 CR3: 00000001b700c005 CR4: 00000000003606e0
[   35.461483] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   35.461484] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   35.461486] Call Trace:
[   35.461501]  intel_hdmi_set_edid+0x37/0x27f [i915]
[   35.461515]  intel_hdmi_detect+0x7c/0x97 [i915]
[   35.461518]  drm_helper_probe_single_connector_modes+0xe1/0x6c0
[   35.461521]  drm_setup_crtcs+0x129/0xa6a
[   35.461523]  ? __switch_to_asm+0x34/0x70
[   35.461525]  ? __switch_to_asm+0x34/0x70
[   35.461527]  ? __switch_to_asm+0x40/0x70
[   35.461528]  ? __switch_to_asm+0x34/0x70
[   35.461529]  ? __switch_to_asm+0x40/0x70
[   35.461531]  ? __switch_to_asm+0x34/0x70
[   35.461532]  ? __switch_to_asm+0x40/0x70
[   35.461534]  ? __switch_to_asm+0x34/0x70
[   35.461536]  __drm_fb_helper_initial_config_and_unlock+0x34/0x46f
[   35.461538]  ? __switch_to_asm+0x40/0x70
[   35.461541]  ? _cond_resched+0x10/0x33
[   35.461557]  intel_fbdev_initial_config+0xf/0x1c [i915]
[   35.461560]  async_run_entry_fn+0x2e/0xf5
[   35.461563]  process_one_work+0x15b/0x364
[   35.461565]  worker_thread+0x2c/0x3a0
[   35.461567]  ? process_one_work+0x364/0x364
[   35.461568]  kthread+0x10c/0x122
[   35.461570]  ? _kthread_create_on_node+0x5d/0x5d
[   35.461572]  ret_from_fork+0x35/0x40
[   35.461574] Code: 74 16 89 f6 48 8d 04 b6 48 c1 e0 05 48 29 f0 48 8d 84 c7 e8 11 00 00 c3 48 c7 c6 b0 19 1e c0 48 c7 c7 64 8a 1c c0 e8 47 88 ed ec <0f> 0b 31 c0 c3 8b 87 a4 04 00 00 80 e4 fc 09 c6 89 b7 a4 04 00
[   35.461604] WARNING: CPU: 6 PID: 411 at drivers/gpu/drm/i915/intel_i2c.c:844 intel_gmbus_get_adapter+0x32/0x37 [i915]
[   35.461606] ---[ end trace 4fe1e63e2dd93373 ]---
[   35.461609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[   35.461613] IP: i2c_transfer+0x4/0x86
[   35.461614] PGD 0 P4D 0
[   35.461616] Oops: 0000 [#1] SMP PTI
[   35.461618] Modules linked in: i915 ahci libahci dm_snapshot dm_bufio dm_raid raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx
[   35.461624] CPU: 6 PID: 411 Comm: kworker/u16:2 Tainted: G        W        4.16.0-rc7.x64-g1cda370ffded #1
[   35.461625] Hardware name: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018
[   35.461628] Workqueue: events_unbound async_run_entry_fn
[   35.461630] RIP: 0010:i2c_transfer+0x4/0x86
[   35.461631] RSP: 0018:ffff9b4e43d47b30 EFLAGS: 00010246
[   35.461633] RAX: ffff9b4e43d47b6e RBX: 0000000000000005 RCX: 0000000000000001
[   35.461635] RDX: 0000000000000002 RSI: ffff9b4e43d47b80 RDI: 0000000000000000
[   35.461636] RBP: ffff9b4e43d47bd8 R08: 0000004d062a83f6 R09: 00000000000003bd
[   35.461638] R10: 0000000000000031 R11: ffffffffad4eda58 R12: 0000000000000002
[   35.461639] R13: 0000000000000001 R14: ffff9b4e43d47b6f R15: ffff9b4e43d47c07
[   35.461641] FS:  0000000000000000(0000) GS:ffff98f92e580000(0000) knlGS:0000000000000000
[   35.461643] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   35.461645] CR2: 0000000000000010 CR3: 00000001b700c005 CR4: 00000000003606e0
[   35.461646] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   35.461647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   35.461649] Call Trace:
[   35.461652]  drm_do_probe_ddc_edid+0xb3/0x128
[   35.461654]  drm_get_edid+0xe5/0x38d
[   35.461669]  intel_hdmi_set_edid+0x45/0x27f [i915]
[   35.461684]  intel_hdmi_detect+0x7c/0x97 [i915]
[   35.461687]  drm_helper_probe_single_connector_modes+0xe1/0x6c0
[   35.461689]  drm_setup_crtcs+0x129/0xa6a
[   35.461691]  ? __switch_to_asm+0x34/0x70
[   35.461693]  ? __switch_to_asm+0x34/0x70
[   35.461694]  ? __switch_to_asm+0x40/0x70
[   35.461696]  ? __switch_to_asm+0x34/0x70
[   35.461697]  ? __switch_to_asm+0x40/0x70
[   35.461698]  ? __switch_to_asm+0x34/0x70
[   35.461700]  ? __switch_to_asm+0x40/0x70
[   35.461701]  ? __switch_to_asm+0x34/0x70
[   35.461703]  __drm_fb_helper_initial_config_and_unlock+0x34/0x46f
[   35.461705]  ? __switch_to_asm+0x40/0x70
[   35.461707]  ? _cond_resched+0x10/0x33
[   35.461724]  intel_fbdev_initial_config+0xf/0x1c [i915]
[   35.461727]  async_run_entry_fn+0x2e/0xf5
[   35.461729]  process_one_work+0x15b/0x364
[   35.461731]  worker_thread+0x2c/0x3a0
[   35.461733]  ? process_one_work+0x364/0x364
[   35.461734]  kthread+0x10c/0x122
[   35.461736]  ? _kthread_create_on_node+0x5d/0x5d
[   35.461738]  ret_from_fork+0x35/0x40
[   35.461739] Code: 5c fa e1 ad 48 89 df e8 ea fb ff ff e9 2a ff ff ff 0f 1f 44 00 00 31 c0 e9 43 fd ff ff 31 c0 45 31 e4 e9 c5 fd ff ff 41 54 55 53 <48> 8b 47 10 48 83 78 10 00 74 70 41 89 d4 48 89 f5 48 89 fb 65
[   35.461756] RIP: i2c_transfer+0x4/0x86 RSP: ffff9b4e43d47b30
[   35.461757] CR2: 0000000000000010
[   35.461759] ---[ end trace 4fe1e63e2dd93374 ]---

Based on a patch by Fei Li.

v2: s/reverting/sticking/ (Chris)

Cc: stable@vger.kernel.org
Cc: Fei Li <fei.li@intel.com>
Co-developed-by: Fei Li <fei.li@intel.com>
Reported-by: Pavel Nakonechnyi <zorg1331@gmail.com>
Reported-and-tested-by: Seweryn Kokot <sewkokot@gmail.com>
Reported-and-tested-by: Laszlo Valko <valko@linux.karinthy.hu>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105549
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105961
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180411131519.9091-1-jani.nikula@intel.com
(cherry picked from commit f212bf9abe)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-04-18 14:17:13 +03:00
Tvrtko Ursulin
e6be6bd856 drm/i915/pmu: Inspect runtime PM state more carefully while estimating RC6
While thinking about sporadic failures of perf_pmu/rc6-runtime-pm* tests
on some CI machines I have concluded that: a) the PMU readout of RC6 can
race against runtime PM transitions, and b) there are other reasons than
being runtime suspended which can cause intel_runtime_pm_get_if_in_use to
fail.

Therefore when estimating RC6 the code needs to assert we are indeed in
suspended state, and if not, the best we can do is return the last known
RC6 value.

Without this check we can calculate the estimated value based on un-
initialized or inappropriate internal state, which can result in over-
estimation, or in any case incorrect value being returned.

v2:
 * Re-arrange the code a bit to avoid second unlock and return branch.
   (Chris Wilson)

v3:
 * Insert some strategic blank lines and improve commit msg.
   (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 1fe699e301 ("drm/i915/pmu: Fix sleep under atomic in RC6 readout")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105010
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180410112704.24462-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 2924bdee21)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-04-18 14:17:09 +03:00
Xidong Wang
fcf1fadf4c drm/i915: Do no use kfree() to free a kmem_cache_alloc() return value
Along the eb_lookup_vmas() error path, the return value from
kmem_cache_alloc() was freed using kfree(). Fix it to use the proper
kmem_cache_free() instead.

Fixes: d1b48c1e71 ("drm/i915: Replace execbuf vma ht with an idr")
Signed-off-by: Xidong Wang <wangxidong_97@163.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v4.14+
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180404093824.9313-1-chris@chris-wilson.co.uk
(cherry picked from commit 6be1187dbf)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-04-18 14:16:56 +03:00
Michael Ellerman
8bf24e8319 selftests/filesystems: Don't run dnotify_test by default
In commit ce290a1960 ("selftests: add devpts selftests"), the
filesystems directory was added to the top-level selftests Makefile.

That had the effect of causing the existing dnotify_test in the
filesystems directory to now be run as part of the default selftests
test-run. Unfortunately dnotify_test is actually an infinite loop.

Fix it by moving dnotify_test to TEST_GEN_PROGS_EXTENDED, which says
that it's a generated file (ie. built) but should not be run as part
of the default test suite run (it's an "extended" test).

While we're here cleanup a few other things, devpts_pts should be in
TEST_GEN_PROGS to indicate that it's built, and with the above two
changes we no longer need a custom all or clean rule.

Fixes: ce290a1960 ("selftests: add devpts selftests")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Christian brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2018-04-17 17:01:16 -06:00
Souptick Joarder
a5240cbde2 fs: cifs: Adding new return type vm_fault_t
Use new return type vm_fault_t for page_mkwrite
handler.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2018-04-17 14:44:35 -05:00
Gustavo A. R. Silva
0d568cd34e cifs: smb2ops: Fix NULL check in smb2_query_symlink
The current code null checks variable err_buf, which is always null
when it is checked, hence utf16_path is free'd and the function
returns -ENOENT everytime it is called, making it impossible for the
execution path to reach the following code:

err_buf = err_iov.iov_base;

Fix this by null checking err_iov.iov_base instead of err_buf. Also,
notice that err_buf no longer needs to be initialized to NULL.

Addresses-Coverity-ID: 1467876 ("Logically dead code")
Fixes: 2d636199e400 ("cifs: Change SMB2_open to return an iov for the error parameter")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-04-17 14:44:30 -05:00
Eric Biggers
9c438d7a3a KEYS: DNS: limit the length of option strings
Adding a dns_resolver key whose payload contains a very long option name
resulted in that string being printed in full.  This hit the WARN_ONCE()
in set_precision() during the printk(), because printk() only supports a
precision of up to 32767 bytes:

    precision 1000000 too large
    WARNING: CPU: 0 PID: 752 at lib/vsprintf.c:2189 vsnprintf+0x4bc/0x5b0

Fix it by limiting option strings (combined name + value) to a much more
reasonable 128 bytes.  The exact limit is arbitrary, but currently the
only recognized option is formatted as "dnserror=%lu" which fits well
within this limit.

Also ratelimit the printks.

Reproducer:

    perl -e 'print "#", "A" x 1000000, "\x00"' | keyctl padd dns_resolver desc @s

This bug was found using syzkaller.

Reported-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 4a2d789267 ("DNS: If the DNS server returns an error, allow that to be cached [ver #2]")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 15:17:41 -04:00