Before commit fa954e6831 ("iommu/vt-d: Delegate the dma domain
to upper layer"), Intel IOMMU started off with all devices in the
identity domain, and took them out later if it found they couldn't
access all of memory. This required devices behind a PCI bridge to
use a DMA domain at the beginning because all PCI devices behind
the bridge use the same source-id in their transactions and the
domain couldn't be changed at run-time.
Intel IOMMU driver is now aligned with the default domain framework,
there's no need to keep this requirement anymore.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200506015947.28662-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, if a 32bit device initially uses an identity domain, Intel
IOMMU driver will convert it forcibly to a DMA one if its address
capability is not enough for the whole system memory. The motivation was
to overcome the overhead caused by possible bounced buffer.
Unfortunately, this improvement has led to many problems. For example,
some 32bit devices are required to use an identity domain, forcing them
to use DMA domain will cause the device not to work anymore. On the
other hand, the VMD sub-devices share a domain but each sub-device might
have different address capability. Forcing a VMD sub-device to use DMA
domain blindly will impact the operation of other sub-devices without
any notification. Further more, PCI aliased devices (PCI bridge and all
devices beneath it, VMD devices and various devices quirked with
pci_add_dma_alias()) must use the same domain. Forcing one device to
switch to DMA domain during runtime will cause in-fligh DMAs for other
devices to abort or target to other memory which might cause undefind
system behavior.
With the last private domain usage in iommu_need_mapping() removed, all
private domain helpers are also cleaned in this patch. Otherwise, the
compiler will complain that some functions are defined but not used.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Daniel Drake <drake@endlessm.com>
Cc: Derrick Jonathan <jonathan.derrick@intel.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200506015947.28662-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
gcc warns because the only reference to ipmmu_find_group
is inside of an #ifdef:
drivers/iommu/ipmmu-vmsa.c:878:28: error: 'ipmmu_find_group' defined but not used [-Werror=unused-function]
Change the #ifdef to an equivalent IS_ENABLED().
Fixes: 6580c8a784 ("iommu/renesas: Convert to probe/release_device() call-backs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@verge.net.au>
Link: https://lore.kernel.org/r/20200508220224.688985-1-arnd@arndb.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The host1x bus implemented on Tegra SoCs is primarily an abstraction to
create logical device from multiple platform devices. Since the devices
in such a setup are typically hierarchical, DMA setup still needs to be
done so that DMA masks can be properly inherited, but we don't actually
want to attach the host1x logical devices to any IOMMU. The platform
devices that make up the logical device are responsible for memory bus
transactions, so it is them that will need to be attached to the IOMMU.
Add a check to __iommu_probe_device() that aborts IOMMU setup early for
busses that don't have the IOMMU operations pointer set since they will
cause a crash otherwise.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200511161000.3853342-1-thierry.reding@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The commit dce8d6964e ("iommu/amd: Convert to probe/release_device()
call-backs") introduced an unused variable,
drivers/iommu/amd_iommu.c: In function 'amd_iommu_uninit_device':
drivers/iommu/amd_iommu.c:422:20: warning: variable 'iommu' set but not
used [-Wunused-but-set-variable]
struct amd_iommu *iommu;
^~~~~
Signed-off-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200509015645.3236-1-cai@lca.pw
Fixes: dce8d6964e ("iommu/amd: Convert to probe/release_device() call-backs")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function is now only used in IOMMU core code and shouldn't be used
outside of it anyway, so remove the export for it.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-35-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move the calls to dev_iommu_get() and try_module_get() into
__iommu_probe_device(), so that the callers don't have to do it on
their own.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-34-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
All drivers are converted to use the probe/release_device()
call-backs, so the add_device/remove_device() pointers are unused and
the code using them can be removed.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-33-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the Exynos IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-32-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On Exynos platforms there can be more than one SYSMMU (IOMMU) for one
DMA master device. Since the IOMMU core code expects only one hardware
IOMMU, use the first SYSMMU in the list.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-31-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the OMAP IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-30-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Remove the tracking of device which could not be probed because
their IOMMU is not probed yet. Replace it with a call to
bus_iommu_probe() when a new IOMMU is probed.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-29-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the Renesas IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-28-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the Tegra IOMMU drivers to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-27-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the Rockchip IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-26-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the QCOM IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-25-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the Mediatek-v1 IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-24-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the Mediatek IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-23-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the MSM IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-22-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the VirtIO IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-21-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the S390 IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-20-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the PAMU IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-19-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the arm-smmu and arm-smmu-v3 drivers to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code does the
group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-18-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the Intel IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200429133712.31431-17-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the AMD IOMMU Driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-16-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make use of generic IOMMU infrastructure to gather the same information
carried in dev_data->passthrough and remove the struct member.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-15-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a check to the bus_iommu_probe() call-path to make sure it ignores
devices which have already been successfully probed. Then export the
bus_iommu_probe() function so it can be used by IOMMU drivers.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-14-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After the previous changes the iommu group may not have a default
domain when iommu_group_add_device() is called. With no default domain
iommu_group_create_direct_mappings() will do nothing and no direct
mappings will be created.
Rename iommu_group_create_direct_mappings() to
iommu_create_device_direct_mappings() to better reflect that the
function creates direct mappings only for one device and not for all
devices in the group. Then move the call to the places where a default
domain actually exists.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-13-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When a bus is initialized with iommu-ops, all devices on the bus are
scanned and iommu-groups are allocated for them, and each groups will
also get a default domain allocated.
Until now this happened as soon as the group was created and the first
device added to it. When other devices with different default domain
requirements were added to the group later on, the default domain was
re-allocated, if possible.
This resulted in some back and forth and unnecessary allocations, so
change the flow to defer default domain allocation until all devices
have been added to their respective IOMMU groups.
The default domains are allocated for newly allocated groups after
each device on the bus is handled and was probed by the IOMMU driver.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-12-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This makes it easier to remove to old code-path when all drivers are
converted. As a side effect that it also fixes the error cleanup
path.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-11-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This is needed to defer default_domain allocation for new IOMMU groups
until all devices have been added to the group.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-10-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Well, not really. The call to iommu_alloc_default_domain() in
iommu_group_get_for_dev() has to stay around as long as there are
IOMMU drivers using the add/remove_device() call-backs instead of
probe/release_device().
Those drivers expect that iommu_group_get_for_dev() returns the device
attached to a group and the group set up with a default domain (and
the device attached to the groups current domain).
But when all drivers are converted this compatability mess can be
removed.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-9-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add call-backs to 'struct iommu_ops' as an alternative to the
add_device() and remove_device() call-backs, which will be removed when
all drivers are converted.
The new call-backs will not setup IOMMU groups and domains anymore,
so also add a probe_finalize() call-back where the IOMMU driver can do
per-device setup work which require the device to be set up with a
group and a domain.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-8-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When check_device() fails on the device, it is not handled by the
IOMMU and amd_iommu_add_device() needs to return -ENODEV.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-7-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The check was only needed for the DMA-API implementation in the AMD
IOMMU driver, which no longer exists.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-6-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Intel VT-d driver already has a matching function to determine the
default domain type for a device. Wire it up in intel_iommu_ops.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200429133712.31431-5-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some devices are reqired to use a specific type (identity or dma)
of default domain when they are used with a vendor iommu. When the
system level default domain type is different from it, the vendor
iommu driver has to request a new default domain with
iommu_request_dma_domain_for_dev() and iommu_request_dm_for_dev()
in the add_dev() callback. Unfortunately, these two helpers only
work when the group hasn't been assigned to any other devices,
hence, some vendor iommu driver has to use a private domain if
it fails to request a new default one.
This adds def_domain_type() callback in the iommu_ops, so that
any special requirement of default domain for a device could be
aware by the iommu generic layer.
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
[ jroedel@suse.de: Added iommu_get_def_domain_type() function and use
it to allocate the default domain ]
Co-developed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-3-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move the code out of iommu_group_get_for_dev() into a separate
function.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200429133712.31431-2-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function qcom_iommu_device_probe() does not perform sufficient
error checking after executing devm_ioremap_resource(), which can
result in crashes if a critical error path is encountered.
Fixes: 0ae349a0f3 ("iommu/qcom: Add qcom_iommu")
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200418134703.1760-1-tangbin@cmss.chinamobile.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In commit a7ba5c3d00 ("drivers/iommu: Export core IOMMU API symbols to
permit modular drivers") a bunch of iommu symbols were exported, all
with _GPL markings except iommu_group_get_for_dev(). That export should
also be _GPL like the others.
Fixes: a7ba5c3d00 ("drivers/iommu: Export core IOMMU API symbols to permit modular drivers")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200430120120.2948448-1-gregkh@linuxfoundation.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The CONFIG_ prefix should be added in the code.
Fixes: 046182525d ("iommu/vt-d: Add Kconfig option to enable/disable scalable mode")
Reported-and-tested-by: Kumar, Sanjay K <sanjay.k.kumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lore.kernel.org/r/20200501072427.14265-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, system fails to boot because the legacy interrupt remapping
mode does not enable 128-bit IRTE (GA), which is required for x2APIC
support.
Fix by using AMD_IOMMU_GUEST_IR_LEGACY_GA mode when booting with
kernel option amd_iommu_intr=legacy instead. The initialization
logic will check GASup and automatically fallback to using
AMD_IOMMU_GUEST_IR_LEGACY if GA mode is not supported.
Fixes: 3928aa3f57 ("iommu/amd: Detect and enable guest vAPIC support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/1587562202-14183-1-git-send-email-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Although SPAPR_TCE_IOMMU itself can be compile tested on certain PowerPC
configurations, its presence makes arch/powerpc/kvm/Makefile to select
modules which do not build in such configuration.
The arch/powerpc/kvm/ modules use kvm_arch.spapr_tce_tables which exists
only with CONFIG_PPC_BOOK3S_64. However these modules are selected when
COMPILE_TEST and SPAPR_TCE_IOMMU are chosen leading to build failures:
In file included from arch/powerpc/include/asm/book3s/64/mmu-hash.h:20:0,
from arch/powerpc/kvm/book3s_64_vio_hv.c:22:
arch/powerpc/include/asm/book3s/64/pgtable.h:17:0: error: "_PAGE_EXEC" redefined [-Werror]
#define _PAGE_EXEC 0x00001 /* execute permission */
In file included from arch/powerpc/include/asm/book3s/32/pgtable.h:8:0,
from arch/powerpc/include/asm/book3s/pgtable.h:8,
from arch/powerpc/include/asm/pgtable.h:18,
from include/linux/mm.h:95,
from arch/powerpc/include/asm/io.h:29,
from include/linux/io.h:13,
from include/linux/irq.h:20,
from arch/powerpc/include/asm/hardirq.h:6,
from include/linux/hardirq.h:9,
from include/linux/kvm_host.h:7,
from arch/powerpc/kvm/book3s_64_vio_hv.c:12:
arch/powerpc/include/asm/book3s/32/hash.h:29:0: note: this is the location of the previous definition
#define _PAGE_EXEC 0x200 /* software: exec allowed */
Fixes: e93a1695d7 ("iommu: Enable compile testing for some of drivers")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200414142630.21153-1-krzk@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If NO_DMA=y (e.g. Sun-3 all{mod,yes}-config):
drivers/iommu/dma-iommu.o: In function `iommu_dma_mmap':
dma-iommu.c:(.text+0x836): undefined reference to `dma_pgprot'
IOMMU_DMA must not be selected, unless HAS_DMA=y.
Hence fix this by making MTK_IOMMU depend on HAS_DMA.
While at it, remove the dependency on ARM || ARM64, as that is already
implied by the dependency on ARCH_MEDIATEK.
Fixes: e93a1695d7 ("iommu: Enable compile testing for some of drivers")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20200410143047.19691-1-geert@linux-m68k.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
