early_ioremap() is also used to map normal memory when constructing
the linear memory mapping. However, since we sometimes need to be able
to distinguish between actual IO mappings and normal memory mappings,
add a early_memremap() call, which maps with PAGE_KERNEL (as opposed
to PAGE_KERNEL_IO for early_ioremap()), and use it when constructing
pagetables.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use one of the software-defined PTE bits to indicate that a mapping is
intended for an IO address. On native hardware this is irrelevent,
since a physical address is a physical address. But in a virtual
environment, physical addresses are also virtualized, so there needs
to be some way to distinguish between pseudo-physical addresses and
actual hardware addresses; _PAGE_IOMAP indicates this intent.
By default, __supported_pte_mask masks out _PAGE_IOMAP, so it doesn't
even appear in the final pagetable.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The exception handlers in entry_32.S should now all call
TRACE_IRQS_OFF before calling the C code. The calls to
trace_hardirqs_fixup should now be unnecessary. Remove them.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
At this point interrupts are off, so let's inform the tracing
code of that fact before calling into C.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
At this point interrupts are off, so let's inform the tracing
code of that fact before calling into C.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
At this point interrupts are off, so let's inform the tracing
code of that fact before calling into C.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Many exceptions use the same code path via the label 'error_code'
in entry_32.S. At this point interrupts are off, so let's inform
the tracing code of that fact before calling into C.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Only one use of the DO_TRAP macros remains. Expand that one and
remove the macros now.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Handle general protection exception with interrupt initially off.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Handle segment not present exception with interrupt initially off.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Handle no coprocessor exception with interrupt initially off.
device_not_available in entry_32.S calls either math_state_restore
or math_emulate. This patch adds an extra indirection to be
able to re-enable interrupts explicitly in traps_32.c
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The int3 exception was already takes as an interrupt and
do_int3 does not fit in the new DO_ERROR macro. This patch
just expands the DO_TRAP macro and rearranges the code a
bit.
No functional changes intended.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There is some macro magic in traps_32.c to construct standard
exception dispatch functions. This patch renames the DO_ERROR-
like macros to DO_TRAP, and introduces new DO_ERROR ones that
conditionally reenable interrupts explicitly, like x86_64.
No code changes.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86_64 uses a helper function conditional_sti in traps_64.c which
is equal to restore_interrupts in kprobes.h. The only user of
restore_interrupts is in traps_32.c. Introduce conditional_sti
for i386 and remove restore_interrupts.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Secondary cpus start with local interrupts disabled.
start_secondary() first initializes the new cpu, then it enables the
local interrupts. (although interrupts are enabled within smp_callin()
as well).
Right now, the local interrupts are enabled as a side effect of calling
ipi_call_lock_irq().
The attached patch clarifies when local interrupts are enabled.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Avoid updating registers or memory twice as well as needlessly loading
or copying registers.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This merges in:
x86/build, x86/microcode, x86/spinlocks, x86/memory-corruption-check,
x86/early-printk, x86/xsave, x86/quirks, x86/setup, x86/signal,
core/signal, x86/urgent, x86/xen
* 'x86-core-v2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (142 commits)
x86: make processor type select depend on CONFIG_EMBEDDED
x86: extend processor type select help text
x86, amd-iommu: propagate PCI device enabling error
warnings: fix arch/x86/kernel/io_apic_64.c
warnings: fix arch/x86/kernel/early_printk.c
x86, fpu: check __clear_user() return value
x86: memory corruption check - cleanup
x86: ioperm user_regset
xen: do not reserve 2 pages of padding between hypervisor and fixmap.
xen: use spin_lock_nest_lock when pinning a pagetable
x86: xsave: set FP, SSE bits in the xsave header in the user sigcontext
x86: xsave: fix error condition in save_i387_xstate()
x86: SB450: deprioritize DMI quirks
x86: SB450: skip IRQ0 override if it is not routed to INT2 of IOAPIC
x86: replace a magic number with a named constant in the VESA boot code
x86 setup: remove IMAGE_OFFSET
x86 setup: remove DEF_INITSEG and DEF_SETUPSEG
Revert "x86: fix ghost EDD devices in /sys again"
x86 setup: fix ghost entries under /sys/firmware/edd take 3
x86: signal: remove indent in restore_sigcontext()
...
* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
avr32: Fix build failures in board code
avr32: Allow selecting multiple pins at once
avr32: Minor pm_power_off cleanup
avr32: Implement {read,write}[bwl]_be
avr32: Replace static clock list with dynamic linked list
avr32: Use platform_driver_probe for pdc platform driver
avr32: Use platform_driver_probe for pio platform driver
avr32: Provide a way to deselect pins in the portmux
ngw100: export J15 through sysfs
avr32: Allow fine-grained control over LCDC pins
avr32: added mem kernel command line option support
Add kernel support for oprofile callgraphs on AVR32
avr32: use the new byteorder headers
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (24 commits)
MMC: Use timeout values from CSR
MMC: CSD and CID timeout values
sdhci: 'scratch' may be used uninitialized
mmc: explicitly mention SDIO support in Kconfig
mmc: remove redundant "depends on"
Fix comment in include/linux/mmc/host.h
sdio: high-speed support
mmc_block: hard code 512 byte block size
sdhci: force high speed capability on some controllers
mmc_block: filter out PC requests
mmc_block: indicate strict ordering
mmc_block: inform block layer about sector count restriction
sdio: give sdio irq thread a host specific name
sdio: make sleep on error interruptable
sdhci: reduce card detection delay
sdhci: let the controller wait for busy state to end
atmel-mci: Add missing flush_dcache_page() in PIO transfer code
atmel-mci: Don't overwrite error bits when NOTBUSY is set
atmel-mci: Add experimental DMA support
atmel-mci: support multiple mmc slots
...
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: fix early panic on amd64 due to typo in supported CPU section
x86, early_ioremap: fix fencepost error
x86: avoid dereferencing beyond stack + THREAD_SIZE
Fix a few instances of board code breakage introduced by the atmel-mci
platform interface changes.
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
at32_select_periph() now takes an u32 bitmask rather than a single pin.
This allows to set multiple pins at once.
Signed-off-by: Alex Raimondi <mailinglist@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
deselecting one of the CPU type CONFIG_CPU_SUP_* config options
can render a kernel unbootable. Make sure this option is only
available if CONFIG_EMBEDDED is enabled.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
extend the help text of the CONFIG_CPU_SUP_* config options to
express what it does and what effects it has.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
propagate an error in enabling the PCI device.
Also eliminates this warning:
arch/x86/kernel/amd_iommu_init.c: In function ‘init_iommu_one’:
arch/x86/kernel/amd_iommu_init.c:726: warning: ignoring return value of ‘pci_enable_device’, declared with attribute warn_unused_result
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix:
arch/x86/kernel/io_apic_64.c: In function ‘print_local_APIC’:
arch/x86/kernel/io_apic_64.c:1284: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
arch/x86/kernel/io_apic_64.c:1285: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘long unsigned int’
We want to print the two halves of 'icr' at 32 bit width.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix warning:
arch/x86/kernel/early_printk.c:993: warning: ‘enable_debug_console’ defined but not used
Eliminate dead code.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix warning:
arch/x86/kernel/xsave.c: In function ‘save_i387_xstate’:
arch/x86/kernel/xsave.c:98: warning: ignoring return value of ‘__clear_user’, declared with attribute warn_unused_result
check the return value and act on it. We should not be ignoring faults
at this point.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move the prototypes from the generic kernel.h header to the more
appropriate include/asm-x86/bios_ebda.h header file.
Also, remove the check from the power management code - this is a
pure x86 matter for now.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
