It reverts commit a4b4e0461e ("of: Add standard property for poweroff capability").
As discussed on the mailing list, it makes more sense to rename back to the
old established property name, without the vendor prefix. Problem being that
the word "source" usually tends to be used for inputs and that is out of control
of the OS. The poweroff capability is an output which simply turns the
system-power off. Also, this property might be used by drivers which power-off
the system and power back on subsequent RTC alarms. This seems to suggest to
remove "poweroff" from the property name and to choose "system-power-controller"
as the more generic name. This patchs adds the required renaming changes and
defines an helper function which checks if this property is set.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The colorspace chapter in the V4L2 Specification was always poorly
written. This patch rewrites it, documenting the new Y'CbCr encoding
and quantization defines and going into much more detail with respect
to how colorspaces are used and what it all means.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Digilent is a board designer, making various Linux capabable FPGA and
processor boards. Add to the vendor list.
Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
The specification requires xlnx,data-width, but example and driver use
xlnx,datawidth. Change the specification to match the implementation.
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Fixes: eebeac03db ("dma: Add Xilinx Video DMA DT Binding Documentation")
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
NCT6792D is similar to NCT6791D. Only beep control and temperature
monitoring registers are different.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Document support for NCT6102D/NCT6104D/NCT6106D and NCT6791D.
Document that NCT5573D is compatible to NCT6775F with the same chip ID.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
It is basically a faster lm75 with improved (11 bit) resolution.
Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add device tree bindings documentation for ltc2978.
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Brown <broonie@kernel.org>
[Guenter Roeck: Minor correction of 'compatible' example]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit extends the mvebu-mbus driver to provide suspend/resume
support. Since mvebu-mbus is not a platform_driver, the syscore_ops
mechanism is used to get ->suspend() and ->resume() hooks called into
the driver.
In those hooks, we save and restore the MBus windows state, to make
sure after resume all Mbus windows are properly restored. Note that
while the state of some windows could be gathered by looking again at
the Device Tree (for statically described windows), it is not the case
of dynamically described windows such as the PCIe memory and I/O
windows. Therefore, we take the simple approach of saving and
restoring the registers for all MBus windows.
In addition, the commit extends the Device Tree binding of the MBus
controller, to control the MBus bridge registers (which define which
parts of the physical address space is routed to MBus windows
vs. normal RAM memory). Those registers must be saved and restored
during suspend/resume. The Device Tree binding extension is made is a
backward compatible fashion, but of course, suspend/resume will not
work without the Device Tree update.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1416585613-2113-7-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This will select the appropriate register layout based on the DT
"compatible" string.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
- Device additions for board vf610-colibri, pwm, backlight, I2C, RTC,
ADC etc.
- Update i.MX6 phyFLEX board to include PCIe, CAN and audio support
- Improve SSI clocks description for i.MX5 platforms
- Add ENET2 support for imx6sx-sdb board
- Add device tree source for LS1021A SoC, board QDS and TWR
- Enable cpufreq support for i.MX53
- Enable VPU device support for i.MX6QDL
- Enable poweroff support for i.MX6 SoCs
- Add support for TBS2910 Matrix ARM mini PC which is built on i.MX6Q
- Create generic base device trees for Vybrid and add support for
Colibri VF50
Note: the change set is built on top of imx-soc-3.19 to resolve the
dependency that "ARM: dts: imx53: add cpufreq-dt support" uses the
clock define IMX5_CLK_ARM that is added by "ARM: imx53: clk: add ARM
clock".
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUcZicAAoJEFBXWFqHsHzO0ooH/ie5r7JDjklD6IlAxD9UyDyp
RQSF/8VYTc1EhECI5D/xmHARnUM5AxfMBQzFyavz/0hkGp22xJtBgp5ZlYtWwyAF
qpLI031/5hn+37NyMxdcd6nU55e7GJw4loBXTZ5pNSRdP+ubsUVccfUdQ1K5hPA6
KeS5vqaX26c5P2R+tkx2pfRLmCrSWNKNIpIbZzenlu2dS7U77ex1AO2W+ToDTgQ3
asVIMD/7oQ4soEGZfSQdzHCftQ2OdVGlybFoMCkW5xrzRVfucbSN2BbLpEM5Z117
/DZpfAmHlT4NrGz/BBzpK6l3AWFmXLmCP/dFvvfzKM3uWgr/zlVF8ChW/xgCc+g=
=FnNq
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Pull "The i.MX device tree changes for 3.19" from Shawn Guo:
- Device additions for board vf610-colibri, pwm, backlight, I2C, RTC,
ADC etc.
- Update i.MX6 phyFLEX board to include PCIe, CAN and audio support
- Improve SSI clocks description for i.MX5 platforms
- Add ENET2 support for imx6sx-sdb board
- Add device tree source for LS1021A SoC, board QDS and TWR
- Enable cpufreq support for i.MX53
- Enable VPU device support for i.MX6QDL
- Enable poweroff support for i.MX6 SoCs
- Add support for TBS2910 Matrix ARM mini PC which is built on i.MX6Q
- Create generic base device trees for Vybrid and add support for
Colibri VF50
Note: the change set is built on top of imx-soc-3.19 to resolve the
dependency that "ARM: dts: imx53: add cpufreq-dt support" uses the
clock define IMX5_CLK_ARM that is added by "ARM: imx53: clk: add ARM
clock".
* tag 'imx-dt-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (51 commits)
ARM: dts: imx6q-tbs2910: Enable snvs-poweroff
ARM: dts: imx6: add pm_power_off support for i.mx6 chips
ARM: dts: vf-colibri: add USB regulators
ARM: dts: imx6: phyFLEX: Add CAN support
ARM: dts: imx6: phyFLEX: Add PCIe
ARM: dts: imx6: phyFLEX: Set correct interrupt for pmic
ARM: dts: imx6: phyFLEX: Enable gpmi in module file
ARM: dts: imx6: phyFLEX: set nodes in alphabetical order
ARM: dts: vf-colibri-eval-v3.dts: Enable ST-M41T0M6 RTC
ARM: dts: vf-colibri: Add I2C support
ARM: dts: imx6qdl: Enable CODA960 VPU
ARM: dts: imx6q-tbs2910: Remove unneeded 'fsl,mode' property
ARM: dts: vf610: enable USB misc/phy nodes where necessary
ARM: dts: vf610: use new GPIO support
ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards
ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02
ARM: dts: vf500-colibri: add Colibri VF50 support
ARM: dts: vf610: create generic base device trees
ARM: dts: vf610: assign oscillator to clock module
dt-bindings: arm: add Freescale LS1021A SoC device tree binding
...
Signed-off-by; Arnd Bergmann <arnd@arndb.de>
- Update i.MX6 suspend code to check DDR instead of CPU type, as the
difference we need to handle is between LPDDR2 and DDR3, not SoCs.
- Set anatop properly for LPDDR2 in DSM mode
- Add support for new SoC LS1021A which integrates dual Cortex-A7
- Add ENET initialization for i.MX6SX platform
- Add cpufreq support for i.MX53 platform
- Add a SNVS based poweroff driver for i.MX6 platforms
- Use ARM Global Timer as clocksource on VF610
Note: the change set is built on top of tag imx-fixes-3.18-2 to resolve
a conflict on file arch/arm/mach-imx/clk-vf610.c.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUcYdSAAoJEFBXWFqHsHzObr4H/RpZ9BlKLonp/HEcdsbCj+Yt
FvEcLS2V1UaHK1o8Gk93pdXHentxWlXYOunSE068xIetgrZi5wVimvV2q14WQZh6
KlRTYgMiPvQmewoaL0QnLaYECqhAoD89PGTQbgLatn8tihzCKKbbnNR6KA+n8qQm
0xpAcm3xckHdvCvr7t4C/lDgkww0Xd4XxMnmuSR9QxdW9doESZfk0emfm7sYd1gx
GW+WAnD0vcMkaPwsCSklI9aaaDE+yELhyu/acocrKIjPPEco6mBFE8Afiwija+pO
NWDegpEqru4IT9/rpTTc5eygKHfVVhSCS1cd+P9e8Ea3d9q3Q/AV/95WiBVJiGg=
=AZMX
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc
Pull "The i.MX SoC update for 3.19" from Shawn Guo
- Update i.MX6 suspend code to check DDR instead of CPU type, as the
difference we need to handle is between LPDDR2 and DDR3, not SoCs.
- Set anatop properly for LPDDR2 in DSM mode
- Add support for new SoC LS1021A which integrates dual Cortex-A7
- Add ENET initialization for i.MX6SX platform
- Add cpufreq support for i.MX53 platform
- Add a SNVS based poweroff driver for i.MX6 platforms
- Use ARM Global Timer as clocksource on VF610
Note: the change set is built on top of tag imx-fixes-3.18-2 to resolve
a conflict on file arch/arm/mach-imx/clk-vf610.c.
* tag 'imx-soc-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
power: reset: imx-snvs-poweroff: add power off driver for i.mx6
ARM: imx: temporarily remove CONFIG_SOC_FSL from LS1021A
ARM: imx: clk-vf610: get input clocks from assigned clocks
ARM: imx: Add Freescale LS1021A SMP support
ARM: imx: Add initial support for Freescale LS1021A
ARM: imx53: add cpufreq support
ARM: imx53: clk: add ARM clock
ARM: imx: add CPU clock type
ARM: imx5: add step clock, used when reprogramming PLL1
ARM: imx: add enet init for i.mx6sx
ARM: imx6sx: add imx6sx iomux-gpr field define
ARM: vf610: Add ARM Global Timer clocksource option
ARM: imx: add anatop settings for LPDDR2 when enter DSM mode
ARM: imx: replace cpu type check with ddr type check
ARM: imx: Fix the removal of CONFIG_SPI option
ARM: imx: clk-vf610: define PLL's clock tree
Signed-off-by; Arnd Bergmann <arnd@arndb.de>
Pull networking fixes from David Miller:
"Several small fixes here:
1) Don't crash in tg3 driver when the number of tx queues has been
configured to be different from the number of rx queues. From
Thadeu Lima de Souza Cascardo.
2) VLAN filter not disabled properly in promisc mode in ixgbe driver,
from Vlad Yasevich.
3) Fix OOPS on dellink op in VTI tunnel driver, from Xin Long.
4) IPV6 GRE driver WCCP code checks skb->protocol for ETH_P_IP
instead of ETH_P_IPV6, whoops. From Yuri Chislov.
5) Socket matching in ping driver is buggy when packet AF does not
match socket's AF. Fix from Jane Zhou.
6) Fix checksum calculation errors in VXLAN due to where the
udp_tunnel6_xmit_skb() helper gets it's saddr/daddr from. From
Alexander Duyck.
7) Fix 5G detection problem in rtlwifi driver, from Larry Finger.
8) Fix NULL deref in tcp_v{4,6}_send_reset, from Eric Dumazet.
9) Various missing netlink attribute verifications in bridging code,
from Thomas Graf.
10) tcp_recvmsg() unconditionally calls ipv4 ip_recv_error even for
ipv6 sockets, whoops. Fix from Willem de Bruijn"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits)
net-timestamp: make tcp_recvmsg call ipv6_recv_error for AF_INET6 socks
bridge: Sanitize IFLA_EXT_MASK for AF_BRIDGE:RTM_GETLINK
bridge: Add missing policy entry for IFLA_BRPORT_FAST_LEAVE
net: Check for presence of IFLA_AF_SPEC
net: Validate IFLA_BRIDGE_MODE attribute length
bridge: Validate IFLA_BRIDGE_FLAGS attribute length
stmmac: platform: fix default values of the filter bins setting
net/mlx4_core: Limit count field to 24 bits in qp_alloc_res
net: dsa: bcm_sf2: reset switch prior to initialization
net: dsa: bcm_sf2: fix unmapping registers in case of errors
tg3: fix ring init when there are more TX than RX channels
tcp: fix possible NULL dereference in tcp_vX_send_reset()
rtlwifi: Change order in device startup
rtlwifi: rtl8821ae: Fix 5G detection problem
Revert "netfilter: conntrack: fix race in __nf_conntrack_confirm against get_next_corpse"
vxlan: Fix boolean flip in VXLAN_F_UDP_ZERO_CSUM6_[TX|RX]
ip6_udp_tunnel: Fix checksum calculation
net-timestamp: Fix a documentation typo
net/ping: handle protocol mismatching scenario
af_packet: fix sparse warning
...
Make the map match the reality, the current binding text is
nonsense:
- The clock required for the clocking of the serial port
must come first and is not optional (as the driver will
otherwise proceed to grab and use the apb_pclk as uartclk),
and the apb_pclk that clocks the logic must come second
as the code will retrieve the first clock by index,
whereas the PrimeCell but will explicitly look for
"apb_pclk" so this can be specified later, as it is
looked up by name.
- The pin control state "default" is the only mandated
state, the sleep state is entirely optional.
We also add an example to avoid further confusion.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
The task_collector mode (or "latency_injector", (C) Dan Willians) is an
optional I/O path in libsas that queues up scsi commands instead of
directly sending it to the hardware. It generall increases latencies
to in the optiomal case slightly reduce mmio traffic to the hardware.
Only the obsolete aic94xx driver and the mvsas driver allowed to use
it without recompiling the kernel, and most drivers didn't support it
at all.
Remove the giant blob of code to allow better optimizations for scsi-mq
in the future.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Daniel Lezcano muttered:
* Marvell timer updates from Ezequiel Garcia
- Add missing clock enable calls for armada
- Change source clock for clocksource and watchdog
* SIRF timer updates from Yanchang Li
- Make clock rate configurable
The OMAP mailbox driver and its existing clients (remoteproc
for OMAP4+) are adapted to use the generic mailbox framework.
The main changes for the adaptation are:
- The tasklet used for Tx is replaced with the state machine from
the generic mailbox framework. The workqueue used for processing
the received messages stays intact for minimizing the effects on
the OMAP mailbox clients.
- The existing exported client API, omap_mbox_get, omap_mbox_put and
omap_mbox_send_msg are deleted, as the framework provides equivalent
functionality. A OMAP-specific omap_mbox_request_channel is added
though to support non-DT way of requesting mailboxes.
- The OMAP mailbox driver is integrated with the mailbox framework
through the proper implementations of mbox_chan_ops, except for
.last_tx_done and .peek_data. The OMAP mailbox driver does not need
these ops, as it is completely interrupt driven.
- The OMAP mailbox driver uses a custom of_xlate controller ops that
allows phandles for the pargs specifier instead of indexing to avoid
any channel registration order dependencies.
- The new framework does not support multiple clients operating on a
single channel, so the reference counting logic is simplified.
- The remoteproc driver (current client) is adapted to use the new API.
The notifier callbacks used within this client is replaced with the
regular callbacks from the newer framework.
- The exported OMAP mailbox API are limited to omap_mbox_save_ctx,
omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq,
with the signature modified to take in the new mbox_chan handle instead
of the OMAP specific omap_mbox handle. The first 2 will be removed when
the OMAP mailbox driver is adapted to runtime_pm. The other exported
API omap_mbox_request_channel will be removed once existing legacy
users are converted to DT.
Signed-off-by: Suman Anna <s-anna@ti.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Some regulators from the max77802 PMIC support to be configured in one
of two operating mode: Output ON (normal) and Output On Low Power Mode.
Not all regulators support these two modes and for some of them, the
mode can be changed while the system is running in normal operation
while others only support their mode to be changed on system suspend.
Extend the max77802 PMIC binding by documenting the possible operating
modes values so the regulators modes can be configured correctly.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Exynos7 SPI controller supports only the auto Selection of
CS toggle mode and Exynos7 SoC includes six SPI controllers.
Add support for these changes in Exynos7 SPI controller driver.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some regulators can run on different operating modes (opmodes). This
allows systems to choose the most efficient opmode for each regulator.
This patch builds on top of (291d761 regulator: Document binding for
regulator suspend state for PM state) adding a regulator-initial-mode
DT property to configure at startup the operating mode for regulators
that support changing its mode during normal operation and a property
regulator-mode to be used in the regulator-state-[mem/disk] nodes for
regulators that supports changing its operating mode when the system
enters in a suspend state.
The set of possible modes that a regulator can operate depends on the
hardware capabilities so a list of generic operating modes can't be
provided. Instead, each hardware binding should define the list of
valid operating modes for the regulators found on that device.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds syscon based phandle to i2c device nodes of exynos5250
and exynos5420. These phandles will be used to save restore i2c sysreg
configuration register during s2r from i2c driver.
CC: Rob Herring <robh+dt@kernel.org>
CC: Randy Dunlap <rdunlap@infradead.org>
CC: Russell King <linux@arm.linux.org.uk>
CC: devicetree@vger.kernel.org
CC: linux-doc@vger.kernel.org
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch adds new board dts file to support Samsung Monk board which
is based on Exynos3250 SoC and has different H/W configuration from
Rinato.
This dts file support following features:
- eMMC
- Main PMIC (Samsung S2MPS14)
- Interface PMIC (Maxim MAX77836, MUIC, fuel-gauge, charger)
- RTC of Exynos3250
- ADC of Exynos3250 with NTC thermistor
- I2S of Exynos3250
- TMU of Exynos3250
- Secure firmware for Exynos3250 secondary cpu boot
- Serial ports of Exynos3250
- gpio-key for power key
Signed-off-by: Youngjun Cho <yj44.cho@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Adding machine driver to instantiate I2S based realtek's ALC5631
sound card on Arndale board.
There are other variants of Audio Daughter Cards for Arndale
Board for which support already exists but there is no support for
Realtek's alc5631 codec hence support for ALC5631 based machine
driver is being added.
This patch also documents the device tree binding for the Arndale
board based machine driver.
Signed-off-by: Claude Youn <claude.youn@gmail.com>
Signed-off-by: Krishna Mohan Dani <krishna.md@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds binding documentation for the infrared remote control
receiver available in Amlogic Meson SoCs.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add support for the DW MMC host found on the Imagination Pistachio SoC.
Like the DW MMC hosts found on SOCFPGA and Rockchip SoCs, the DW MMC
host on Pistachio requires the use of SDMMC_CMD_USE_HOLD_REG.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The Exynos7 has a DWMMC controller (v2.70a) which is different from
prior versions. This patch adds new compatible strings for exynos7.
This patch also fixes the CLKSEL register offset on exynos7.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
Tested-by: Vivek Gautam <gautam.vivek@samsung.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The 25 MHz reference clock has better stability so its use is preferred over the
core clock.
This commit takes advantage of the already introduced Armada 375 devicetree
compatible string and adds a new timer initialization. If available, the timer
will use the reference clock (named as 'fixed'). Otherwise, it falls back to the
previous behavior.
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The 25 MHz reference clock has better stability so its use is prefered over the
core clock. Change the Armada 375 clock initialization to use this reference
clock. To ensure the driver is compatible with an old devicetree, also provide
a fallback path which will silently return to the previous behavior.
While here, add the clock specification to the binding documentation.
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The memory controller on NVIDIA Tegra exposes various knobs that can be
used to tune the behaviour of the clients attached to it.
In addition, the memory controller implements an SMMU (IOMMU) which can
translate I/O virtual addresses to physical addresses for clients. This
is useful for scatter-gather operation on devices that don't support it
natively and for virtualization or process separation.
Signed-off-by: Thierry Reding <treding@nvidia.com>
If pre-filled framebuffer nodes are used, the firmware may need extra
properties to find the right node. This documents the properties to use
for this on sunxi platforms.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This goes contrary to how devicetree usually works, so drop it. Instead if
the firmware needs to be able to find a specific node it should use a
platform specific compatible + properties for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
SOF_TIMESTAMPING_OPT_ID puts the id in ee_data, not ee_info.
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add information which regulators can be disabled during system suspend.
Suggested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The HLCDC IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5
family or sama5d3 family) exposes 2 subdevices:
- a display controller (controlled by a DRM driver)
- a PWM chip
This patch adds documentation for atmel-hlcdc DT bindings.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Anthony Harivel <anthony.harivel@emtrion.de>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch add haptic DT binding documentation and example
to support haptic driver in max77693 Multifunction device.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch adds the binding documentation for Samsung S2MPS13 PMIC
which is similiar with existing S2MPS14 PMIC. S2MPS13 has the different number
of regulators from S2MPS14 and RTC/Clock is the same with the S2MPS14.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add documentation and script to obtain required firmware.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add unittests for OF overlays.
It tests overlay device addition/removal and whether
the apply revert sequence is correct.
Changes since V1:
* Added local fixups entries.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Overlays are a method to dynamically modify part of the kernel's
device tree with dynamically loaded data. Add the core functionality to
parse, apply and remove an overlay changeset. The core functionality
takes care of managing the overlay data format and performing the add
and remove. Drivers are expected to use the overlay functionality to
support custom expansion busses commonly found on consumer development
boards like the BeagleBone or Raspberry Pi.
The overlay code uses CONFIG_OF_DYNAMIC changesets to perform the low
level work of modifying the devicetree.
Documentation about internal and APIs is provided in
Documentation/devicetree/overlay-notes.txt
v2:
- Switch from __of_node_alloc() to __of_node_dup()
- Documentation fixups
- Remove 2-pass processing of properties
- Remove separate ov_lock; just use the DT mutex.
v1:
- Drop delete capability using '-' prefix. The '-' prefixed names
are valid properties and nodes and there is no need for it just yet.
- Do not update special properties - name & phandle ones.
- Change order of node attachment, so that the special property update
works.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
This driver is very similar to the macvlan driver except that it
uses L3 on the frame to determine the logical interface while
functioning as packet dispatcher. It inherits L2 of the master
device hence the packets on wire will have the same L2 for all
the packets originating from all virtual devices off of the same
master device.
This driver was developed keeping the namespace use-case in
mind. Hence most of the examples given here take that as the
base setup where main-device belongs to the default-ns and
virtual devices are assigned to the additional namespaces.
The device operates in two different modes and the difference
in these two modes in primarily in the TX side.
(a) L2 mode : In this mode, the device behaves as a L2 device.
TX processing upto L2 happens on the stack of the virtual device
associated with (namespace). Packets are switched after that
into the main device (default-ns) and queued for xmit.
RX processing is simple and all multicast, broadcast (if
applicable), and unicast belonging to the address(es) are
delivered to the virtual devices.
(b) L3 mode : In this mode, the device behaves like a L3 device.
TX processing upto L3 happens on the stack of the virtual device
associated with (namespace). Packets are switched to the
main-device (default-ns) for the L2 processing. Hence the routing
table of the default-ns will be used in this mode.
RX processins is somewhat similar to the L2 mode except that in
this mode only Unicast packets are delivered to the virtual device
while main-dev will handle all other packets.
The devices can be added using the "ip" command from the iproute2
package -
ip link add link <master> <virtual> type ipvlan mode [ l2 | l3 ]
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Tim Hockin <thockin@google.com>
Cc: Brandon Philips <brandon.philips@coreos.com>
Cc: Pavel Emelianov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds documentation of device tree bindings for the Amlogic Meson
SPIFC (SPI Flash Controller).
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUcmzrAAoJEHm+PkMAQRiGUskH/il9ul71lyyvrA/bRbi0GfUa
2Ej1Q4Fa/SRzLMiWF8Wy/AlYBbl4/uD3a3XEueK4f9dNguTLZF/rwXTlKKzUeiGg
zFObbJg3zfa926PQcEV5mc+h71ZkWmbH5CjF6GfYIlj6kjVa5MXF3lSZz27DoAx3
DjoLKpj1fXQJu1HD7xvUn0r720RgYfic9iKdS69eEYex+Js92WySukogvMG5WAVD
xuwlJcJgm0YpgNr1t1ij4ekE5XR9jjiE4EXbOZYWcOOd+YXAwZpBrKOgxP0gma3w
OGwEvmAbzf/3IsGq3dPFYWQ2nfiLA/Qh7y20E19FLKpPBu5ZuTEgFU8VTxh+k+g=
=rRmA
-----END PGP SIGNATURE-----
Merge tag 'v3.18-rc6' into devicetree/next
v3.18-rc6 contains an important DT bug fix, c1a2086e2d, "of/selftest:
Fix off-by-one error in removal path" which affects testing of the
overlay patch series. Merge it into the devicetree/next staging branch
so that the overlay patches are applied on top of a known working tree.
Linux 3.18-rc6
Conflicts:
drivers/of/address.c
Drop the now unused reason argument from the ->change_queue_depth method.
Also add a return value to scsi_adjust_queue_depth, and rename it to
scsi_change_queue_depth now that it can be used as the default
->change_queue_depth implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
We plan to use hierarchy irqdomain to suppport CPU vector assignment,
interrupt remapping controller, IO-APIC controller, MSI interrupt
and hypertransport interrupt etc on x86 platforms. So extend irqdomain
interfaces to support hierarchy irqdomain.
There are already many clients of current irqdomain interfaces.
To minimize the changes, we choose to introduce new version 2 interfaces
to support hierarchy instead of extending existing irqdomain interfaces.
According to Thomas's suggestion, the most important design decision is
to build hierarchy struct irq_data to support hierarchy irqdomain, so
hierarchy irqdomain related data could be saved in struct irq_data.
With support of hierarchy irq_data, we could also support stacked
irq_chips. This is most useful in case of set_affinity().
The new hierarchy irqdomain introduces following interfaces:
1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ
and related resources.
2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs.
3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program
interrupt controllers to activate/deactivate interrupt.
There are also several help functions to ease irqdomain implemenations:
1) irq_domain_get_irq_data(): get irq_data associated with a specific
irqdomain.
2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into
irq_data.
3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke
parent irqdomain's alloc/free callbacks.
We also changed irq_startup()/irq_shutdown() to invoke
irq_domain_activate_irq()/irq_domain_deactivate_irq() to program
interrupt controller when start/stop interrupts.
[ tglx: Folded parts of the later patch series in ]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>
Cc: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The clock controller module (CCM) has several clock inputs, which
are connected to external crystal oscillators. To reflect this,
assign these fixed clocks to the CCM node directly.
This especially resolves initialization order dependencies we had
with the earlier initialization code: When resolving of the fixed
clocks failed in clk-vf610, the code created fixed clocks with a
rate of 0.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
TBS Technologies is a company which specializes in developing, producing
and marketing of digital TV tuner cards for PCs.
for additional details refer to http://www.tbsdtv.com/about-us.html
Signed-off-by: Soeren Moch <smoch@web.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This driver register pm_power_off with snvs power off function. If
your boards NOT use PMIC_ON_REQ to turn on/off external pmic, or use
other pin to do, please disable the driver in dts, otherwise, your
pm_power_off maybe overwrote by this driver.
Signed-off-by: Robin Gong <b38343@freescale.com>
Acked-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Pull vfs fixes from Al Viro:
"Assorted fixes, most in overlayfs land"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ovl: ovl_dir_fsync() cleanup
ovl: update MAINTAINERS
ovl: pass dentry into ovl_dir_read_merged()
ovl: use lockless_dereference() for upperdentry
ovl: allow filenames with comma
ovl: fix race in private xattr checks
ovl: fix remove/copy-up race
ovl: rename filesystem type to "overlay"
isofs: avoid unused function warning
vfs: fix reference leak in d_prune_aliases()
Conflicts:
drivers/net/ieee802154/fakehard.c
A bug fix went into 'net' for ieee802154/fakehard.c, which is removed
in 'net-next'.
Add build fix into the merge from Stephen Rothwell in openvswitch, the
logging macros take a new initial 'log' argument, a new call was added
in 'net' so when we merge that in here we have to explicitly add the
new 'log' arg to it else the build fails.
Signed-off-by: David S. Miller <davem@davemloft.net>
The suspend/resume code for Armada XP has to modify certain registers
of the SDRAM controller. Therefore, we need to define a Device Tree
binding for this hardware block.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: devicetree@vger.kernel.org
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1416585613-2113-2-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
- 2 fixes for OF selftest code
- Fix for PowerPC address parsing to disable work-around except on old
PowerMACs
- Fix a crash when earlycon is enabled, but no device is found
- DT documentation fixes and missing vendor prefixes
All but the doc updates are also for stable.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUbqAVAAoJEMhvYp4jgsXiNLUH/A5cpNKcs2D0GCpDxxkZa6X/
o5vwuECwd7dFH83lkFWdNFCNJ6B7hUUG3RDO63SgzZch2auQR1yETJrXSbUNeDKM
HMp3CVvVjqFz7h86H2x+mijxUPJl7YWtFuC1RQUJkMGULC16BnYLSVGrrqHI37BJ
E5hdmfJtARUGcmZO291JB9bdfuR5gAfIR4GIYsAQHn0RbiuST/L1DyL2QFkh69eW
yyeB9elIw+xYBUlEVMkq5LmH12l0VA1eSIofBWEfj40cCax1CblL1nzV1+s7oHpv
JrATuyfxlTjs/tdUeeV/lMT4Vg/ICWsbPJKWb4UaJv0nH+u+oGiKSCyl5X4DH4c=
=M65+
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
"DeviceTree fixes for 3.18:
- two fixes for OF selftest code
- fix for PowerPC address parsing to disable work-around except on
old PowerMACs
- fix a crash when earlycon is enabled, but no device is found
- DT documentation fixes and missing vendor prefixes
All but the doc updates are also for stable"
* tag 'devicetree-fixes-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/selftest: Fix testing when /aliases is missing
of/selftest: Fix off-by-one error in removal path
documentation: pinctrl bindings: Fix trivial typo 'abitrary'
devicetree: bindings: Add vendor prefix for Micron Technology, Inc.
of: Add vendor prefix for Chips&Media, Inc.
of/base: Fix PowerPC address parsing hack
devicetree: vendor-prefixes.txt: fix whitespace
of: Fix crash if an earlycon driver is not found
of/irq: Drop obsolete 'interrupts' vs 'interrupts-extended' text
of: Spelling s/stucture/structure/
devicetree: bindings: add sandisk to the vendor prefixes
Resource management
- Support 64-bit bridge windows if we have 64-bit dma_addr_t (Yinghai Lu)
PCI device hotplug
- Apply _HPX Link Control settings to all devices with a link (Yinghai Lu)
Generic host bridge driver
- Add DT binding for "linux,pci-domain" property (Lucas Stach)
APM X-Gene
- Assign resources to bus before adding new devices (Duc Dang)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=smv9
-----END PGP SIGNATURE-----
Merge tag 'pci-v3.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"These are fixes for an issue with 64-bit PCI bus addresses on 32-bit
PAE kernels, an APM X-Gene problem (it depended on a generic change we
removed before merging), a fix for my hotplug device configuration
changes, and a devicetree documentation update.
Resource management:
- Support 64-bit bridge windows if we have 64-bit dma_addr_t (Yinghai Lu)
PCI device hotplug:
- Apply _HPX Link Control settings to all devices with a link (Yinghai Lu)
Generic host bridge driver:
- Add DT binding for "linux,pci-domain" property (Lucas Stach)
APM X-Gene:
- Assign resources to bus before adding new devices (Duc Dang)"
* tag 'pci-v3.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Support 64-bit bridge windows if we have 64-bit dma_addr_t
PCI: Apply _HPX Link Control settings to all devices with a link
PCI: Add missing DT binding for "linux,pci-domain" property
PCI: xgene: Assign resources to bus before adding new devices
This adds the NovaTech OrionLXm which is based on the AM335x SoC
http://www.novatechweb.com/substation-automation/orionlxm/
RAM: 512MiB
Flash: 4GB eMMC
Ethernet PHYs: 2x Micrel KSZ8041FTLI
USB ports are used internally by the expansion cards.
Internal micro SD slot is available.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
John W. Linville says:
====================
pull request: wireless-next 2014-11-21
Please pull this batch of updates intended for the 3.19 stream...
For the mac80211 bits, Johannes says:
"It has been a while since my last pull request, so we accumulated
another relatively large set of changes:
* TDLS off-channel support set from Arik/Liad, with some support
patches I did
* custom regulatory fixes from Arik
* minstrel VHT fix (and a small optimisation) from Felix
* add back radiotap vendor namespace support (myself)
* random MAC address scanning for cfg80211/mac80211/hwsim (myself)
* CSA improvements (Luca)
* WoWLAN Net Detect (wake on network found) support (Luca)
* and lots of other smaller changes from many people"
For the Bluetooth bits, Johan says:
"Here's another set of patches for 3.19. Most of it is again fixes and
cleanups to ieee802154 related code from Alexander Aring. We've also got
better handling of hardware error events along with a proper API for HCI
drivers to notify the HCI core of such situations. There's also a minor
fix for mgmt events as well as a sparse warning fix. The code for
sending HCI commands synchronously also gets a fix where we might loose
the completion event in the case of very fast HW (particularly easily
reproducible with an emulated HCI device)."
And...
"Here's another bluetooth-next pull request for 3.19. We've got:
- Various fixes, cleanups and improvements to ieee802154/mac802154
- Support for a Broadcom BCM20702A1 variant
- Lots of lockdep fixes
- Fixed handling of LE CoC errors that should trigger SMP"
For the Atheros bits, Kalle says:
"One ath6kl patch and rest for ath10k, but nothing really major which
stands out. Most notable:
o fix resume (Bartosz)
o firmware restart is now faster and more reliable (Michal)
o it's now possible to test hardware restart functionality without
crashing the firmware using hw-restart parameter with
simulate_fw_crash debugfs file (Michal)"
On top of that...both ath9k and mwifiex get their usual level of
updates. Of note is the ath9k spectral scan work from Oleksij Rempel.
I also pulled from the wireless tree in order to avoid some merge issues.
Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce FTRACE_OPS_FL_IPMODIFY to avoid conflict among
ftrace users who may modify regs->ip to change the execution
path. If two or more users modify the regs->ip on the same
function entry, one of them will be broken. So they must add
IPMODIFY flag and make sure that ftrace_set_filter_ip() succeeds.
Note that ftrace doesn't allow ftrace_ops which has IPMODIFY
flag to have notrace hash, and the ftrace_ops must have a
filter hash (so that the ftrace_ops can hook only specific
entries), because it strongly depends on the address and
must be allowed for only few selected functions.
Link: http://lkml.kernel.org/r/20141121102516.11844.27829.stgit@localhost.localdomain
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
[ fixed up some of the comments ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add "micrel,rmii-reference-clock-select-25-mhz" to Micrel ethernet PHY
binding documentation.
This property is needed to properly describe some revisions of Micrel
PHYs which has the function of this configuration bit inverted so that
setting it enables 25 MHz rather than 50 MHz clock mode.
Note that a clock reference ("rmii-ref") is still needed to actually
select either mode.
Cc: devicetree@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reduce indentation of Micrel PHY binding documentations somewhat.
Also fix "reference input clock" typo while at it.
Cc: devicetree@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Micrel KSZ8081 and KSZ8091 PHYs have the RMII Reference Clock Select
bit, which is used to select 25 or 50 MHz clock mode.
Note that on some revisions of the PHY (e.g. KSZ8081RND) the function of
this bit is inverted so that setting it enables 25 rather than 50 MHz
mode. Add a new device-tree property
"micrel,rmii-reference-clock-select-25-mhz" to describe this.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document the device tree binding for the WM8960 codec, and modify the
driver to extract the platform data from device tree, if present.
Signed-off-by: Zidan Wang <b50113@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
- rate init for rk3288 clocks
- enablement of various peripherals
- new boardfile for Haoyu Marsboard (rk3066 based)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJUa1KSAAoJEPOmecmc0R2BuUsIAKC74yQhApYDPib1o8PrtW4I
f8N41vfF+zrxUHYOAIZUMCjNuaBBagnvlXe6EmGZ9crQhThMytEKUP4rG2pkScw5
+MKF2aw4sKUHPDDZ0n9VMVMW0i0HfkVlhB921cDfhKVcBpGE44YNusC5+1wsa+8r
USGDl0EVTSMyAjXD/ogSqberQBBfFc4eqS0H+ZkCmA/saKa+tLpH0heqY/prq3FU
mryXryGIUkCSwN7CB/lt45jT6qfb1UdNOgahK24lt2EmH9R/0IIrqzI8dOf6mnSA
lBKnLPazbes0jny2iJSVfNQmlgWodpPY3kNEwxho4LrYhu+sTzW2oKMZrAXTxqY=
=j7JA
-----END PGP SIGNATURE-----
Merge tag 'v3.19-rockchip-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Pull "ARM: rockchip: second batch of dts related changes" from Heiko Stuebner:
- the dts part of the rk3288 smp support
- rate init for rk3288 clocks
- enablement of various peripherals
- new boardfile for Haoyu Marsboard (rk3066 based)
* tag 'v3.19-rockchip-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: enable PWM on Radxa Rock
ARM: dts: rockchip: fix invalid unit-address in rk3188.dtsi
ARM: dts: rk3288: add VOP iommu nodes
ARM: dts: rockchip: add reset for CPU nodes
ARM: dts: rockchip: add intmem node for rk3288 smp support
ARM: dts: rockchip: add pmu references to cpus nodes
ARM: dts: rockchip: add serial aliases for rk3066 and rk3188
ARM: dts: rockchip: Add devicetree source for MarsBoard RK3066
ARM: dts: rockchip: Add EMAC Rockchip for RK3066 SoCs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The CP15 barrier instructions (CP15ISB, CP15DSB and CP15DMB) are
deprecated in the ARMv7 architecture, superseded by ISB, DSB and DMB
instructions respectively. Some implementations may provide the
ability to disable the CP15 barriers by disabling the CP15BEN bit in
SCTLR_EL1. If not enabled, the encodings for these instructions become
undefined.
To support legacy software using these instructions, this patch
register hooks to -
* emulate CP15 barriers and warn the user about their use
* toggle CP15BEN in SCTLR_EL1
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The SWP instruction was deprecated in the ARMv6 architecture. The
ARMv7 multiprocessing extensions mandate that SWP/SWPB instructions
are treated as undefined from reset, with the ability to enable them
through the System Control Register SW bit. With ARMv8, the option to
enable these instructions through System Control Register was dropped
as well.
To support legacy applications using these instructions, port the
emulation of the SWP and SWPB instructions from the arm port to arm64.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Typically, providing support for legacy instructions requires
emulating the behaviour of instructions whose encodings have become
undefined. If the instructions haven't been removed from the
architecture, there maybe an option in the implementation to turn
on/off the support for these instructions.
Create common infrastructure to support legacy instruction
emulation. In addition to emulation, also provide an option to support
hardware execution when supported. The default execution mode (one of
undef, emulate, hw exeuction) is dependent on the state of the
instruction (deprecated or obsolete) in the architecture and
can specified at the time of registering the instruction handlers. The
runtime state of the emulation can be controlled by writing to
individual nodes in sysctl. The expected default behaviour is
documented as part of this patch.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This has mostly been about introducing A80 support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cJ5x
-----END PGP SIGNATURE-----
Merge tag 'sunxi-core-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/soc
Pull "Allwinner Core Additions for 3.19" from Maxime Ripard:
This has mostly been about introducing A80 support
* tag 'sunxi-core-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi: make sun6i SMP ops static
ARM: sunxi: Select ARCH_HAS_RESET_CONTROLLER and RESET_CONTROLLER for sun9i
Documentation: sunxi: Add A80 datasheet link
devicetree: bindings: Document supported Allwinner sunxi SoCs
ARM: sunxi: Introduce Allwinner A80 support
devicetree: bindings: Add vendor prefix for Merrii Technology Co., Ltd.
ARM: sunxi: Add debug uart used by sun9i (Allwinner A80)
Documentation: sunxi: Update Allwinner SoC documentation (A31/A31s/A23)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull "ARM: meson: SOC related changes" from Carlo Caione:
This is the pull request for the SoC related changes for the 3.19.
The support for Meson8 is added together with L2 cache management.
* tag 'v3.19-meson-soc' of https://github.com/carlocaione/linux-meson:
clocksource: meson6: Select CLKSRC_MMIO
ARM: meson: enable L2 cache
ARM: meson: document meson8 compatible properties
ARM: meson: add meson8 support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJUa1NRAAoJEPOmecmc0R2BhycH/RSVMLZ8o5AWEwXEhDaf0Y/8
YnH0uW1wZazAsDtkOHvxBwIHX16E7tNoODZ5eT/OqMK55SSWuxaayOOx7uRx44va
qf3pV8S/Wh+gjUIwhAkvLd9kgoVHuJRS++WzG9YrcT89qUaLcmekXKukxA32eKwM
xjwZJsyYWVseL3UupTY+lMT4dtuaIfaxN6m2WtMWViKwQR8zHNC6fwySQbqGBwAe
X5eoWA6Tv0c1NXrHghjxL1uVj4htqPZhgRUne5BTgGay2D7uJFxNWvQ92ppK5DdD
4c6sH1y2/IXSZYnrCEYg0ARRyhZreZtVWW5ZvPTWHBr6WXOZe33fw6+MvO5hPGk=
=KyXS
-----END PGP SIGNATURE-----
Merge tag 'v3.19-rockchip-soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc
Pull "code part of the rk3288 smp support" from Heiko Stübner:
here is the second batch of soc related changes, consisting only
of the smp support for rk3288.
Due to the slight misheap of the v3.18 cpuclk pull being merge, it is based
on exactly this merge commit from Olof to next/soc.
* tag 'v3.19-rockchip-soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: rockchip: add basic smp support for rk3288
ARM: rockchip: add option to access the pmu via a phandle in smp_operations
ARM: rockchip: convert to regmap and use pmu syscon if available
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some distributions carry an "old" format of overlayfs while mainline has a
"new" format.
The distros will possibly want to keep the old overlayfs alongside the new
for compatibility reasons.
To make it possible to differentiate the two versions change the name of
the new one from "overlayfs" to "overlay".
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reported-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Andy Whitcroft <apw@canonical.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=DrlM
-----END PGP SIGNATURE-----
Merge tag 'v3.19-next-dts' of https://github.com/mbgg/linux-mediatek into next/dt
Pull "Add support for mt6592, mt8127 and mt8135 Socs from Mediatek"
from Matthias Brugger:
Here comes the pull request which introduces basic support for
Mediatek SoCs mt6592, mt8127 and mt8135.
The patches for the mt81xx got merged in the late tree for v3.18 but
were not be merged at the end. They got a small fix regarding the
compatible and model string in the dts files.
* tag 'v3.19-next-dts' of https://github.com/mbgg/linux-mediatek:
dt-bindings: add documentation for Mediatek SoC
ARM: mediatek: add dts for mt6592-evb
ARM: mediatek: Add basic support for mt6592
dt-bindings: add more chips in documentation for Mediatek SoC
ARM: dts: Build dtb for mt8127 & mt8135
ARM: mediatek: add dts for MT8135 evaluation board.
ARM: mediatek: Add basic support for mt8135
ARM: mediatek: add dts for 8127 Moose board
ARM: mediatek: Add basic support for mt8127
Signed-off-by; Arnd Bergmann <arnd@arndb.de>
It is only about a not so recent driver for old platforms: RTT as RTC driver:
- RTT as RTC driver enhancements and machine specific include files removal
- RTT as RTC driver conversion to device tree
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJUZg/EAAoJEAf03oE53VmQ/KAIAJi5Ky2ekaZ4FGWbDrnQBHV+
X0M/wvCdHw4D7VENo1W3U3ulf5r0XimeY6nnbmx3Ki0fTE2O3VyfLNzkjQtMf6iX
TfoJM9y4fWsY5AXnynYO1Gj/2CH6Xab79Kb5sxL8b9VvlUMxlsKoQOmUYHC775OX
YiBfp3dZYODkMyIIQmSkoZGj+kkgWbjMrp9CPueqVltha/EbfBP96Kib2G/aJVkb
F9QyOq8B/mpUk2P29L1hc9X0/tjwaLZsO97zzhYVj7VwZS9sbYztQgmUNdtEds4/
7EhMwSXxb9L5LkuoyuHFpRLMGzLrN9XBftE58s92hXwnM2KZE4eNo/JF0SGDOKo=
=POJG
-----END PGP SIGNATURE-----
Merge tag 'at91-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/drivers
Pull "First batch of drivers for 3.19" from Nicolas Ferre:
It is only about a not so recent driver for old platforms: RTT as RTC driver:
- RTT as RTC driver enhancements and machine specific include files removal
- RTT as RTC driver conversion to device tree
* tag 'at91-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
rtc: at91sam9: add DT bindings documentation
rtc: at91sam9: use clk API instead of relying on AT91_SLOW_CLOCK
ARM: at91: add clk_lookup entry for RTT devices
rtc: at91sam9: rework the Kconfig description
rtc: at91sam9: make use of syscon/regmap to access GPBR registers
rtc: at91sam9: add DT support
rtc: at91sam9: replace devm_ioremap by devm_ioremap_resource
rtc: at91sam9: use standard readl/writel functions instead of raw versions
rtc: at91sam9: remove references to mach specific headers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch documents deprecated vendor name "isil" to fix warning of
undocumented string for device isl29028 as reported while running checkpatch.pl
on drivers/staging/iio/light/isl29028.c. This is done to maintain compatibility
with older kernels.
Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch documents the device isl29028 with its vendor-prefix. Undocumented deprecated vendor-prefix
found by checkpatch also documented for compatibility reasons.
Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for the omap 1w driver, and to fix resume and interrupt issues
on the l3-noc driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MBo8
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.19/w1-and-l3-noc' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers
Pull "omap driver changes for v3.19" from Tony Lindgren:
Few omap driver changes to add minimal device tree support
for the omap 1w driver, and to fix resume and interrupt issues
on the l3-noc driver.
* tag 'omap-for-v3.19/w1-and-l3-noc' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: omap_l3_noc: Correct returning IRQ_HANDLED unconditionally in the irq handler
bus: omap_l3_noc: Add resume hook to restore context
w1: omap-hdq: support device probing with device-tree
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Recently many changes have been done inside the driver
so this patch updates the driver's doc for example reviewing
information for the rx and tx processes that are managed
by napi method, adding new information for missing glue-logic files
etc.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull the beginning of seq_file cleanup from Steven:
"I'm looking to clean up the seq_file code and to eventually merge the
trace_seq code with seq_file as well, since they basically do the same thing.
Part of this process is to remove the return code of seq_printf() and friends
as they are rather inconsistent. It is better to use the new function
seq_has_overflowed() if you want to stop processing when the buffer
is full. Note, if the buffer is full, the seq_file code will throw away
the contents, allocate a bigger buffer, and then call your code again
to fill in the data. The only thing that breaking out of the function
early does is to save a little time which is probably never noticed.
I started with patches from Joe Perches and modified them as well.
There's many more places that need to be updated before we can convert
seq_printf() and friends to return void. But this patch set introduces
the seq_has_overflowed() and does some initial updates."
This can be used to have GPIO host wakeup method suitable for the
platform and configurable GAP for host sleep handshake.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Calibration data can be downloaded through device tree method. This
patch adds the documentation. Also, instead of searching device tree
node by name using of_find_node_by_name() API, let's use
for_each_compatible_node().
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
On ARM machines, where generally speaking the idle state numbering has
no fixed and standard meaning it is useful to provide a description
of the idle state inner workings for benchmarking and monitoring purposes.
This patch adds a property to the idle states bindings that if present
gives platform firmware a means of describing the idle state and export
the string description to user space.
The patch updates the DT parsing code accordingly to take the description,
if present, into consideration.
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
On some platforms the device tree bindings must provide the kernel
with a status flag for idle states, that defines whether the idle
state is operational or not in the current configuration.
This patch adds a status property to the ARM idle states compliant
with ePAPR v1.1 and updates the DT parsing code accordingly.
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
A misspelled 'arbitrary' propagated to quite a few locations in the DT
binding documentation for pin-controllers. Fixing by:
git grep abitrary | cut -f1 -d: | xargs sed -i 's/abitrary/arbitrary/'
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
This patch is used to add vendor prefix for Micron Technology, Inc. in
the vendor-prefixes.txt file.
Micron Technology, Inc. is an American multinational corporation based
in Boise, Idaho, best known for producing many forms of semiconductor
devices. This includes DRAM, SDRAM, flash memory, eMMC and SSDs.
Signed-off-by: Bean Huo <bpqw@micron.com>
[robh: cleanup commit msg formatting and company name]
Signed-off-by: Rob Herring <robh@kernel.org>
Chips&Media is a developer of Video Codec IP cores.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[robh: fix-up alphabetical ordering]
Signed-off-by: Rob Herring <robh@kernel.org>
a9ecdc0fdc ("of/irq: Fix lookup to use 'interrupts-extended' property
first") updated the description to say that:
- Both 'interrupts' and 'interrupts-extended' may be present
- Software should prefer 'interrupts-extended'
- Software that doesn't comprehend 'interrupts-extended' may use
'interrupts'
But there is still a paragraph at the end that prohibits having both and
says 'interrupts' should be preferred.
Remove the contradictory text.
Fixes: a9ecdc0fdc ("of/irq: Fix lookup to use 'interrupts-extended' property first")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v3.13+
Acked-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Add sandisk to the list of vendors. This prefix should be used
also for companies absorbed by Sandisk, like M-Systems.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Rob Herring <robh@kernel.org>
Information how to use the GCC pre-processor, objdump, strace, top, etc.
are generic and not specific to the S390 architecture, so we do not need
this information in Debugging390.txt
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The information about the address spaces was completely outdated, since
the usage of the address spaces changed quite a bit since the early days.
This patch now updates the information about the usage of the address
spaces, mostly by using the description from Heiko's patch "rework uaccess
code - fix locking issues" (457f218095).
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Scott says:
"Highlights include a bunch of 8xx optimizations, device tree bindings
for Freescale BMan, QMan, and FMan datapath components, misc device tree
updates, and inbound rio window support."
AM4372 SoC has 2 DCAN modules. Add compatible id and
raminit driver data for it. The driver data is same as AM3352
but this gives us flexibility to add AM4372 specific quirks
if required later.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The Synchronous Peripheral Flash Interface (SPFI) controller found
on IMG SoCs supports single, dual, and (optionally) quad mode SPI
transfers.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
AM3352 SoC has 2 DCAN modules. Add compatible id and
raminit driver data for am3352 DCAN.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
DRA7 SoC has 2 CAN IPs. Provide compatible IDs and RAMINIT
register data for both.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Some TI SoCs like DRA7 have a RAMINIT register specification
different from the other AMxx SoCs and as expected by the
existing driver.
To add more insanity, this register is shared with other
IPs like DSS, PCIe and PWM.
Provides a more generic mechanism to specify the RAMINIT
register location and START/DONE bit position and use the
syscon/regmap framework to access the register.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The patch implements the OPAL rtc driver that binds with the rtc
driver subsystem. The driver uses the platform device infrastructure
to probe the rtc device and register it to rtc class framework. The
'wakeup' is supported depending upon the property 'has-tpo' present
in the OF node. It provides a way to load the generic rtc driver in
in the absence of an OPAL driver.
The patch also moves the existing OPAL rtc get/set time interfaces to the
new driver and exposes the necessary OPAL calls using EXPORT_SYMBOL_GPL.
Test results:
-------------
Host:
[root@tul169p1 ~]# ls -l /sys/class/rtc/
total 0
lrwxrwxrwx 1 root root 0 Oct 14 03:07 rtc0 -> ../../devices/opal-rtc/rtc/rtc0
[root@tul169p1 ~]# cat /sys/devices/opal-rtc/rtc/rtc0/time
08:10:07
[root@tul169p1 ~]# echo `date '+%s' -d '+ 2 minutes'` > /sys/class/rtc/rtc0/wakealarm
[root@tul169p1 ~]# cat /sys/class/rtc/rtc0/wakealarm
1413274345
[root@tul169p1 ~]#
FSP:
$ smgr mfgState
standby
$ rtim timeofday
System time is valid: 2014/10/14 08:12:04.225115
$ smgr mfgState
ipling
$
CC: devicetree@vger.kernel.org
CC: tglx@linutronix.de
CC: rtc-linux@googlegroups.com
CC: a.zummo@towertech.it
Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
RSS (Receive Side Scaling) typically uses Toeplitz hash and a 40 or 52 bytes
RSS key.
Some drivers use a constant (and well known key), some drivers use a random
key per port, making bonding setups hard to tune. Well known keys increase
attack surface, considering that number of queues is usually a power of two.
This patch provides infrastructure to help drivers doing the right thing.
netdev_rss_key_fill() should be used by drivers to initialize their RSS key,
even if they provide ethtool -X support to let user redefine the key later.
A new /proc/sys/net/core/netdev_rss_key file can be used to get the host
RSS key even for drivers not providing ethtool -x support, in case some
applications want to precisely setup flows to match some RX queues.
Tested:
myhost:~# cat /proc/sys/net/core/netdev_rss_key
11:63:99:bb:79:fb:a5:a7:07:45:b2:20:bf:02:42:2d:08:1a:dd:19:2b:6b:23:ac:56:28:9d:70:c3:ac:e8:16:4b:b7:c1:10:53:a4:78:41:36:40:74:b6:15:ca:27:44:aa:b3:4d:72
myhost:~# ethtool -x eth0
RX flow hash indirection table for eth0 with 8 RX ring(s):
0: 0 1 2 3 4 5 6 7
RSS hash key:
11:63:99:bb:79:fb:a5:a7:07:45:b2:20:bf:02:42:2d:08:1a:dd:19:2b:6b:23:ac:56:28:9d:70:c3:ac:e8:16:4b:b7:c1:10:53:a4:78:41
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull input subsystem updates from Dmitry Torokhov:
"Mostly small fixups to PS/2 tochpad drivers (ALPS, Elantech,
Synaptics) to better deal with specific hardware"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elantech - update the documentation
Input: elantech - provide a sysfs knob for crc_enabled
Input: elantech - report the middle button of the touchpad
Input: alps - ignore bad data on Dell Latitudes E6440 and E7440
Input: alps - allow up to 2 invalid packets without resetting device
Input: alps - ignore potential bare packets when device is out of sync
Input: elantech - fix crc_enabled for Fujitsu H730
Input: elantech - use elantech_report_trackpoint for hardware v4 too
Input: twl4030-pwrbutton - ensure a wakeup event is recorded.
Input: synaptics - add min/max quirk for Lenovo T440s
Pull libata fixes from Tejun Heo:
"The most notable is the revert of lock splitting optimization in ahci.
This also made the IRQ handling threaded even when there's only one
IRQ in use. The conversion missed IRFQ_SHARED leading to screaming
IRQs problem in some cases and the threaded IRQ handling showed
performance regression in some LKP test cases. The changes are
reverted for now. It'll probably be retried once threaded IRQ
handling is removed from ahci.
Other than that, there's one fix for ahci and several patches adding
device IDs"
* 'for-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci: fix AHCI parameters not taken into account
ata: sata_rcar: Add r8a7793 device support
ahci: Add Device IDs for Intel Sunrise Point PCH
ahci: disable MSI instead of NCQ on Samsung pci-e SSDs on macbooks
Revert "AHCI: Optimize single IRQ interrupt processing"
Revert "AHCI: Do not acquire ata_host::lock from single IRQ handler"
ata: sata_rcar: Disable DIPM mode for r8a7790 ES1
This patch adds the DT bindings documentation for Silicon Labs Si4713 FM
radio transmitter.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
In order to have subsytem agnostic media bus format definitions we've
moved media bus definition to include/uapi/linux/media-bus-format.h and
prefixed values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT.
Reference new definitions in all platform drivers.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
In order to have subsytem agnostic media bus format definitions we've
moved media bus definition to include/uapi/linux/media-bus-format.h and
prefixed them with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT.
Update the v4l documentation accordingly.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Since simplefb nodes do not relate directly to hw typically they have been
placed in the root of the devicetree. As the represent runtime information
having them as sub-nodes of /chosen is more logical, specify this.
Also specify when to set the chosen stdout-path property to a simplefb node.
For reliable handover to a hardware specific driver, that driver needs to
know which simplefb to unregister when taking over, specify how the hw driver
can find the matching simplefb node.
Last add some advice on how to fill and use simplefb nodes from a firmware
pov.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
A simple-framebuffer node represents a framebuffer setup by the firmware /
bootloader. Such a framebuffer may have a number of clocks in use, add a
property to communicate this to the OS.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This adds a DT binding documentation for the MT6592 SoC from Mediatek.
Signed-off-by: Howard Chen <ibanezchen@gmail.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The TS3A227E is an autonomous audio accessory detection and
configuration switch that detects 3-pole or 4-pole audio accessories
and configures internal switches to route the signals accordingly.
This chip also has built-in support for the new button standard
described in the Android "Wired audio headset specification" v1.0.
These buttons will be reported on the jack as buttons 0-3 mapped to
KEY_MEDIA, KEY_VOLUMEUP, KEY_VOLUMEDOWN, and KEY_VOICE_COMMAND.
This will be added as an aux_dev and have the jack passed in from the
machine driver.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Conflicts:
drivers/net/ethernet/chelsio/cxgb4vf/sge.c
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
sge.c was overlapping two changes, one to use the new
__dev_alloc_page() in net-next, and one to use s->fl_pg_order in net.
ixgbe_phy.c was a set of overlapping whitespace changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) sunhme driver lacks DMA mapping error checks, based upon a report by
Meelis Roos.
2) Fix memory leak in mvpp2 driver, from Sudip Mukherjee.
3) DMA memory allocation sizes are wrong in systemport ethernet driver,
fix from Florian Fainelli.
4) Fix use after free in mac80211 defragmentation code, from Johannes
Berg.
5) Some networking uapi headers missing from Kbuild file, from Stephen
Hemminger.
6) TUN driver gets csum_start offset wrong when VLAN accel is enabled,
and macvtap has a similar bug, from Herbert Xu.
7) Adjust several tunneling drivers to set dev->iflink after registry,
because registry sets that to -1 overwriting whatever we did. From
Steffen Klassert.
8) Geneve forgets to set inner tunneling type, causing GSO segmentation
to fail on some NICs. From Jesse Gross.
9) Fix several locking bugs in stmmac driver, from Fabrice Gasnier and
Giuseppe CAVALLARO.
10) Fix spurious timeouts with NewReno on low traffic connections, from
Marcelo Leitner.
11) Fix descriptor updates in enic driver, from Govindarajulu
Varadarajan.
12) PPP calls bpf_prog_create() with locks held, which isn't kosher.
Fix from Takashi Iwai.
13) Fix NULL deref in SCTP with malformed INIT packets, from Daniel
Borkmann.
14) psock_fanout selftest accesses past the end of the mmap ring, fix
from Shuah Khan.
15) Fix PTP timestamping for VLAN packets, from Richard Cochran.
16) netlink_unbind() calls in netlink pass wrong initial argument, from
Hiroaki SHIMODA.
17) vxlan socket reuse accidently reuses a socket when the address
family is different, so we have to explicitly check this, from
Marcelo Lietner.
18) Fix missing include in nft_reject_bridge.c breaking the build on ppc
and other architectures, from Guenter Roeck.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
vxlan: Do not reuse sockets for a different address family
smsc911x: power-up phydev before doing a software reset.
lib: rhashtable - Remove weird non-ASCII characters from comments
net/smsc911x: Fix delays in the PHY enable/disable routines
net/smsc911x: Fix rare soft reset timeout issue due to PHY power-down mode
netlink: Properly unbind in error conditions.
net: ptp: fix time stamp matching logic for VLAN packets.
cxgb4 : dcb open-lldp interop fixes
selftests/net: psock_fanout seg faults in sock_fanout_read_ring()
net: bcmgenet: apply MII configuration in bcmgenet_open()
net: bcmgenet: connect and disconnect from the PHY state machine
net: qualcomm: Fix dependency
ixgbe: phy: fix uninitialized status in ixgbe_setup_phy_link_tnx
net: phy: Correctly handle MII ioctl which changes autonegotiation.
ipv6: fix IPV6_PKTINFO with v4 mapped
net: sctp: fix memory leak in auth key management
net: sctp: fix NULL pointer dereference in af->from_addr_param on malformed packet
net: ppp: Don't call bpf_prog_create() in ppp_lock
net/mlx4_en: Advertize encapsulation offloads features only when VXLAN tunnel is set
cxgb4 : Fix bug in DCB app deletion
...
A chapter is added to describe the trackpoint packets.
A section is added to describe the behaviour of the knob crc_enabled in
sysfs.
The introduction of the documentation only mentioned v1/v2, but in the
last part it already contains explanation of v3 and v4. The introduction
is updated.
Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
41e5c0f81d ("of/pci: Add pci_get_new_domain_nr() and
of_get_pci_domain_nr()") added parsing of the "linux,pci-domain" property,
but didn't add the binding documentation.
Since this property will be supported by a number of host bridge drivers,
add it to the common PCI binding doc.
Fixes: 41e5c0f81d ("of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr()")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
The device tree probing for R-Car M2N (r8a7793) is added.
Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Correct the example of memory orderings in memory-barriers.txt
Commit 615cc2c9cf "Documentation/memory-barriers.txt: fix important typo re
memory barriers" changed the assignment to x and y. Change the rest of the
example to match this change.
Reported-by: Ganesh Rapolu <ganesh.rapolu@hotmail.com>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Short-circuit booleans are not defences against compilers breaking
your intended control dependencies.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Document the RCU self test boot parameters in kernel-parameters.txt.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Document the device tree binding for the ALC5631 codec and update vendor
specific prefix for the Realtek.
Signed-off-by: Krishna Mohan Dani <krishna.md@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The clock name "fmanclk" was given in the example, but not specified
in the binding itself. Made clock-names mandatory as otherwise there's
not much point having it.
Added a reference to the fsl,qman and fsl,bman properties proposed
in http://patchwork.ozlabs.org/patch/407034/ and
http://patchwork.ozlabs.org/patch/407035/
Signed-off-by: Scott Wood <scottwood@freescale.com>
The Frame Manager (FMan) combines the Ethernet network interfaces with
packet distribution logic to provide intelligent distribution and
queuing decisions for incoming traffic at line rate.
This binding document describes Freescale's Frame Manager hardware
attributes that are used by the Frame Manager driver for its basic
initialization and configuration.
Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Portals are memory mapped interfaces to QMan that allow low-latency,
lock-less interaction by software running on processor cores,
accelerators and network interfaces with the QMan
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: I29764fa8093b5ce65460abc879446795c50d7185
Signed-off-by: Scott Wood <scottwood@freescale.com>
The Queue Manager is part of the Data-Path Acceleration Architecture
(DPAA). QMan supports queuing and QoS scheduling of frames to CPUs,
network interfaces and DPAA logic modules, maintains packet ordering
within flows. Besides providing flow-level queuing, is also
responsible for congestion management functions such as RED/WRED,
congestion notifications and tail discards. This binding covers the
CCSR space programming model
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: I3acb223893e42003d6c9dc061db568ec0b10d29b
Signed-off-by: Scott Wood <scottwood@freescale.com>
Portals are memory mapped interfaces to BMan that allow low-latency,
lock-less interaction by software running on processor cores,
accelerators and network interfaces with the BMan
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: I6d245ffc14ba3d0e91d403ac7c3b91b75a9e6a95
Signed-off-by: Scott Wood <scottwood@freescale.com>
The Buffer Manager is part of the Data-Path Acceleration Architecture
(DPAA). BMan supports hardware allocation and deallocation of buffers
belonging to pools originally created by software with configurable
depletion thresholds. This binding covers the CCSR space programming
model
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: I3ec479bfb3c91951e96902f091f5d7d2adbef3b2
Signed-off-by: Scott Wood <scottwood@freescale.com>
The documentation only mentioned the generic fallback compatible
property.
Add the missing SoC-specific compatible properties, which are already in
use.
Also drop a bogus 0x unit-address prefix while we're at it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
The documentation only mentioned the generic fallback compatible
property.
Add the missing SoC-specific compatible properties, some of which are
already in use.
Also fix a small typo, while we're at it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable led-mode configuration for KSZ8081 and KSZ8091.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A recent commit extended the documentation of the ethernet-phy
compatible property, but placed the new paragraph under the max-speed
property.
Fixes: f00e756ed1 ("dt: Document a compatible entry for MDIO ethernet
Phys")
Cc: devicetree@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
An underrun (playback) event occurs when the serializer transfer
data from the XRBUF buffer to the XRSR shift register, but the
XRBUF hasn't been filled. Similarly, the overrun (capture) event
occurs when data from the XRSR shift register is transferred to
the XRBUF but it hasn't been read yet.
These events are handled as XRUN events that cause the pcm to stop.
The stream has to be explicitly restarted by the userspace which
ensures that after stopping/starting McASP the data transfer is
aligned with DMA. The other possibility was to internally stop and
start McASP without DMA even knowing about it.
Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Improve performance by using multiple RDMA/RC channels per SCSI
host for communication with an SRP target. About the
implementation:
- Introduce a loop over all channels in the code that uses
target->ch.
- Set the SRP_MULTICHAN_MULTI flag during login for the creation
of the second and subsequent channels.
- RDMA completion vectors are chosen such that RDMA completion
interrupts are handled by the CPU socket that submitted the I/O
request. As one can see in this patch it has been assumed if a
system contains n CPU sockets and m RDMA completion vectors
have been assigned to an RDMA HCA that IRQ affinity has been
configured such that completion vectors [i*m/n..(i+1)*m/n) are
bound to CPU socket i with 0 <= i < n.
- Modify srp_free_ch_ib() and srp_free_req_data() such that it
becomes safe to invoke these functions after the corresponding
allocation function failed.
- Add a ch_count sysfs attribute per target port.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove the tagged argument from scsi_adjust_queue_depth, and just let it
handle the queue depth. For most drivers those two are fairly separate,
given that most modern drivers don't care about the SCSI "tagged" status
of a command at all, and many old drivers allow queuing of multiple
untagged commands in the driver.
Instead we start out with the ->simple_tags flag set before calling
->slave_configure, which is how all drivers actually looking at
->simple_tags except for one worke anyway. The one other case looks
broken, but I've kept the behavior as-is for now.
Except for that we only change ->simple_tags from the ->change_queue_type,
and when rejecting a tag message in a single driver, so keeping this
churn out of scsi_adjust_queue_depth is a clear win.
Now that the usage of scsi_adjust_queue_depth is more obvious we can
also remove all the trivial instances in ->slave_alloc or ->slave_configure
that just set it to the cmd_per_lun default.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Allow a driver to ask for block layer tags by setting .use_blk_tags in the
host template, in which case it will always see a valid value in
request->tag, similar to the behavior when using blk-mq. This means even
SCSI "untagged" commands will now have a tag, which is especially useful
when using a host-wide tag map.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Currently scsi piggy backs on the block layer to define the concept
of a tagged command. But we want to be able to have block-level host-wide
tags assigned even for untagged commands like the initial INQUIRY, so add
a new SCSI-level flag for commands that are tagged at the scsi level, so
that even commands without that set can have tags assigned to them. Note
that this alredy is the case for the blk-mq code path, and this just lets
the old path catch up with it.
We also set this flag based upon sdev->simple_tags instead of the block
queue flag, so that it is entirely independent of the block layer tagging,
and thus always correct even if a driver doesn't use block level tagging
yet.
Also remove the old blk_rq_tagged; it was only used by SCSI drivers, and
removing it forces them to look for the proper replacement.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
